MAX4754AEVKIT+ [MAXIM]
Data and Audio Signal Routing;型号: | MAX4754AEVKIT+ |
厂家: | MAXIM INTEGRATED PRODUCTS |
描述: | Data and Audio Signal Routing |
文件: | 总4页 (文件大小:94K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
19-0826; Rev 0; 5/07
MAX4754A Evaluation Kit
Evluates:MX754A
General Description
Features
The MAX4754A evaluation kit (EV kit) is a fully assem-
bled and tested printed-circuit board (PCB) that
demonstrates the capabilities of the MAX4754A 0.5Ω,
quad single-pole, double-throw (SPDT) switch with dual
control lines. The EV kit comes with the
MAX4754AETE+ installed.
♦ Data and Audio Signal Routing
♦ Low R (0.5Ω typ) Audio Switches
♦ +1.8V to +5.5V Supply Range
♦ Proven PCB Layout
ON
♦ Fully Assembled and Tested
Ordering Information
PART
TYPE
IC PACKAGE
MAX4754AEVKIT+
EV kit 16 Thin QFN-EP* (4mm x 4mm)
+Denotes a lead-free and RoHS-compliant EV kit.
*EP = Exposed paddle.
Component Supplier
Component List
SUPPLIER
PHONE
WEBSITE
DESIGNATION QTY
DESCRIPTION
TDK Corp.
847-803-6100
www.component.tdk.com
0.1µF 15ꢀ, 25V X7R ceramic
capacitor (0603)
TDK C1608X7R1E104K
C1
C2
1
1
Note: Indicate that you are using the MAX4754A when con-
tacting this component supplier.
10µF 10ꢀ, 10V X5R ceramic
capacitor (0805)
TDK C2012X5R1A106K
JU1, JU2
R1, R2
2
2
2-pin headers
100kΩ 5ꢀ resistors (0603)
MAX4754AETE+ (16-pin thin QFN,
4mm x 4mm)
U1
—
1
1
PCB: MAX4754A Evaluation Kit+
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
MAX4754A Evaluation Kit
Quick Start
Recommended Equipment
Detailed Description of Hardware
The MAX4754A is a 0.5Ω, quad SPDT switch with dual
control lines. The MAX4754A EV kit board provides a
proven layout for evaluating the MAX4754A. The EV kit
comes with a MAX4754AETE+ installed.
• One +5V DC power supply
• One ohmmeter
Procedure
The MAX4754A EV kit is fully assembled and tested.
Follow the steps below to verify board operation.
Caution: Do not turn on the power supply until all
connections are completed.
Switch Control
There are two jumpers (JU1 and JU2) on the MAX4754A
EV kit board, which individually control the logic level of
the digital control inputs INA and INB, as shown in
Tables 1 and 2. Refer to the MAX4754A data sheet for a
detailed description of the switching function.
1) Turn off the 5V DC power supply.
2) Make sure the shunts of all jumpers are in the follow-
ing default positions:
Power Supply
The MAX4754A EV kit is powered from a user-supplied
+1.8V to +5.5V DC power supply connected to the
VDD and GND pads.
JU1: (1-2)
JU2: (1-2)
INA is high
INB is high
3) Connect the (-) terminal of the 5V DC power supply
to any GND pad of the MAX4754A EV kit. Connect
the (+) terminal to the VDD pad.
4) Connect one terminal of the ohmmeter to the COM1
pad of the MAX4754A EV kit. Connect the other ter-
minal of the ohmmeter to the NC1 pad.
Evluates:MX754A
5) Turn on the 5V DC power supply.
6) Remove the shunt of jumper JU1, then put it back
on; observe the display difference of the ohmmeter
during the jumper changing
Table 2. Jumper JU2 Configuration
Table 1. Jumper JU1 Configuration
SHUNT
SHUNT
JUMPER
DESCRIPTION
JUMPER
DESCRIPTION
POSITION
POSITION
1-2*
INB is logic-high
INB is logic-low
1-2*
INA is logic-high
INA is logic-low
JU2
JU1
Open
Open
*Default position.
*Default position.
2
_______________________________________________________________________________________
MAX4754A Evaluation Kit
Evluates:MX754A
GND
3
1
9
4
NO1
NO2
NC1
NC2
NO3
COM1
COM1
NO1
NO2
NC1
NC2
NO3
11
15
COM2
COM3
COM2
COM3
12
13
U1
MAX4754A
5
7
6
NO4
NC3
NC4
NO4
NC3
NC4
COM4
VDD
COM4
16
VDD
8
2
V+
VDD
JU1
C1
0.1μF
C2
10μF
INA
INA
INB
VDD
R1
100kΩ
14
GND
GND
JU2
10
INB
EP*
R2
100kΩ
GND
*EP = EXPOSED PAD SOLDERED TO GND.
Figure 1. MAX4754A EV Kit Schematic
_______________________________________________________________________________________
3
MAX4754A Evaluation Kit
Evluates:MX754A
Figure 2. MAX4754A EV Kit Component Placement Guide—
Component Side
Figure 3. MAX4754A EV Kit PCB Layout—Component Side
Figure 4. MAX4754A EV Kit PCB Layout—Solder Side
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
4 _____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2007 Maxim Integrated Products
is a registered trademark of Maxim Integrated Products, Inc.
Boblet
相关型号:
©2020 ICPDF网 联系我们和版权申明