MAX4027ESD [MAXIM]
225MHz, Triple, 2-Channel Video Multiplexer-Amplifier; 225MHz ，四人间， 2路视频多路复用器 - 放大器
| 型号： | MAX4027ESD |
| 厂家： | 
MAXIM INTEGRATED PRODUCTS |
| 描述： | 225MHz, Triple, 2-Channel Video Multiplexer-Amplifier |
| 文件： | 总11页 (文件大小：352K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
19-2987; Rev 0; 9/03
225MHz, Triple, 2-Channel Video
Multiplexer-Amplifier
General Description
Features
The MAX4027 is a triple, wideband, 2-channel, nonin-
verting gain-of-two video amplifier with input multiplex-
ing, capable of driving up to two back-terminated video
loads. The MAX4027 features current-mode feedback
amplifiers configured for a gain of two (+6dB) with a
-3dB large-signal bandwidth of 200MHz. The device
has low (0.012%/0.014°) differential gain and phase
errors, and operates from ±±5 supplies.
ꢀ Excellent Video Specifications:
75MHz Small-Signal 0.1dB Gain Flatness
62MHz Large-Signal 0.1dB Gain Flatness
0.012%/0.014° Differential Gain/Phase Error
ꢀ VGA to UXGA Resolution
ꢀ High Speed:
200MHz 2V
-3dB Bandwidth
P-P
The MAX4027 is ideal for use in broadcast and graph-
ics video systems because of the low 2pF input capaci-
tance, channel-to-channel switching time of only 1±ns,
and wide 62MHz, large-signal 0.1dB bandwidth. High-
impedance output disabling allows the MAX4027 to be
incorporated into large switching arrays with minimal
interaction with the source. Specified over the -40°C to
+8±°C extended temperature range, the MAX4027 is
available in 14-pin SO and TSSOP packages.
1100V/µs Slew Rate
15ns Settling Time to 0.1%
ꢀ Internal Gain of 2V/V Compensates for Output
Back Termination
ꢀ Fast Switching:
15ns Channel-Switching Time
260mV
Switching Transient
P-P
ꢀ Drives Two Back-Terminated Video Loads
ꢀ High-Impedance Output Disable
Applications
5ideo Source Selection (Multiplexing)
Picture in Picture (PIP) Insertion
Crosspoint Expansion
Ordering Information
Coaxial Cable Drivers
PART
TEMP RANGE
-40°C to +85°C
-40°C to +85°C
PIN-PACKAGE
14 SO
Supports 5GA to UXGA (1600 x 1200) Resolution
Enterprise Class (Blade) Servers
Keyboard-5ideo-Mouse (K5M)
MAX4027ESD
MAX4027EUD
14 TSSOP
Typical Operating Circuit
Pin Configuration
TOP VIEW
MAX4027
OUT1
R
G
B
VIDEO
SOURCE
1
x 2
R
IN1A
1
2
3
4
5
6
7
14 A/B
IN1A
IN2A
IN3A
IN2A
IN3A
GND
IN1B
IN2B
IN3B
13 OUT1
12
V
CC
TRIPLE
2:1
MUX
OUT2
OUT3
x 2
x 2
G
B
IN1B
IN2B
IN3B
11 OUT2
MAX4027
10
9
V
EE
R
G
B
VIDEO
SOURCE
2
OUT3
EN
8
SO/TSSOP
A/B
EN
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
225MHz, Triple, 2-Channel Video
Multiplexer-Amplifier
ABSOLUTE MAXIMUM RATINGS
Positive Supply Voltage (V
to GND) ..................................+6V
Continuous Power Dissipation (T = +70°C)
CC
A
Negative Supply Voltage (V to GND)..................................-6V
14-Pin TSSOP (derate 9.1mW/°C above +70°C) .........727mW
14-Pin SO (derate 8.3mW/°C above +70°C)................667mW
Operating Temperature Range ...........................-40°C to +85°C
Storage Temperature Range.............................-65°C to +150°C
Junction Temperature .....................................................+150°C
Lead Temperature (soldering, 10s) .................................+300°C
EE
Amplifier Input Voltage (IN_ _).........(V - 0.3V) to (V
Digital Input Voltage (EN, A/B)...................-0.3V to (V
+ 0.3V)
+ 0.3V)
EE
CC
CC
Output Short Circuit to GND (Note 1).........................Continuous
Output Short Circuit to V or V ...........................................5s
CC
EE
Note 1: Continuous power-dissipation rating must also be observed.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
DC ELECTRICAL CHARACTERISTICS
(V
= 5V, V = -5V, V
= 0V, R = 150 to GND, T = -40°C to +85°C. Typical values are at T = +25°C.) (Note 2)
CC
EE
IN_ _
L
A
A
PARAMETER
SYMBOL
CONDITIONS
MIN
+4.5
-4.5
TYP
+5.0
-5.0
31
MAX
+5.5
-5.5
39
UNITS
V
CC
Operating Supply Voltage Range
Positive Supply Current
Inferred from the PSRR test
V
V
EE
EN = GND
I
mA
CC
EN = 5V
17
24
EN = GND
28
36
Negative Supply Current
Input Voltage Range
Input Offset Voltage
I
mA
V
EE
EN = 5V
15
21
V
Inferred from voltage gain
1.25
1.9
1.75
1
IN_ _
T
T
= +25°C
6
11
A
A
V
mV
OS
= -40°C to +85°C
Input Offset-Voltage Matching
Voltage Gain
V
Channel to channel
2.5V
1
12
mV
V/V
OS
A
V
=
OUT_
2.0
2.1
V
Input Offset-Voltage Temperature
Coefficient
TCV
1
2
µV/°C
OS
T
T
= +25°C
10
18
A
A
Input Bias Current
Input Resistance
I
µA
B
= -40°C to +85°C
Channel on
Channel off
100
1
400
20
k
V
= -1.25V to
IN_ _
R
IN
+1.25V
M
m
k
DC Output Resistance
R
10
OUT
Disabled Output Resistance
DC Power-Supply Rejection Ratio
Output Voltage Swing
R
EN = 5V, V
= -2.5V to +2.5V (Note 3)
OUT_
1.6
86
OUT(d)
PSRR
V
= +4.5V to +5.5V, V = -4.5V to -5.5V
60
dB
V
CC
EE
V
2.5
3.5
143
OUT_
Output Short-Circuit Current
I
mA
SC
LOGIC CHARACTERISTICS (EN, A/B)
Logic-Low Threshold
V
0.8
V
V
IL
IH
IL
Logic-High Threshold
V
2.0
Logic-Low Input Current
Logic-High Input Current
I
V
V
= 0V
-4
-20
µA
µA
IL
I
= +5.5V, V = +5.5V
CC
350
600
IH
IH
2
_______________________________________________________________________________________
225MHz, Triple, 2-Channel Video
Multiplexer-Amplifier
AC ELECTRICAL CHARACTERISTICS
(V
= 5V, V = -5V, V
= 0V, R = 75 to GND, R = 150 to GND, T = +25°C, unless otherwise noted.)
CC
EE
IN_ _
IN
L
A
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
AMPLIFIER CHARACTERISTICS
Small-Signal -3dB Bandwidth
BW
V
V
V
V
= 20mV
= 20mV
225
75
MHz
MHz
MHz
MHz
SS
IN_ _
IN_ _
IN_ _
IN_ _
P-P
Small-Signal Bandwidth for
0.1dB Gain Flatness
BW
LS(0.1)
P-P
Large-Signal -3dB Bandwidth
BW
= 1V
= 1V
200
62
LS
LS(0.1)
SR
P-P
P-P
Large-Signal Bandwidth for
0.1dB Gain Flatness
BW
Slew Rate
V
V
= 1V
= 1V
1100
15
V/µs
ns
IN_ _
IN_ _
P-P
P-P
Settling Time to 0.1%
Differential Gain Error
Differential Phase Error
Delay Between Channels
Channel-to-Channel Crosstalk
A/B Crosstalk
t
S
DG
DP
5-step modulated staircase (Note 4)
5-step modulated staircase (Note 4)
0.012
0.014
0.1
-61
-80
1
%
degrees
ns
t
V
V
V
= 1V , t = 100ps
P-P R
D
IN_ _
IN_ _
IN_ _
X
=
=
1V , f = 10MHz
dB
TALK
P-P
1V , f = 10MHz
P-P
dB
Output Impedance
Z
f = 10MHz
OUT
Total Harmonic Distortion
Off-Isolation
THD
V
V
= 2V , f = 10MHz
64
dBc
dB
OUT_
OUT_
P-P
A
= 2V , f = 10MHz, R = 75
-83
3
ISO
P-P
S
Output Capacitance
Input Capacitance
C
Channel on or off
Channel on or off
f = 100kHz
pF
OUT
C
2
pF
IN
Input-Voltage Noise Density
Input-Current Noise Density
SWITCHING CHARACTERISTICS
Channel-Switching Time
Enable Delay Time
e
6.5
6.5
nV/ Hz
pA/ Hz
n
i
n
f = 100kHz
t
(Notes 5, 6)
(Notes 5, 7)
(Notes 5, 7)
(Note 8)
15
20
ns
ns
ns
SW
PDE
PDD
t
Disable Delay Time
t
25
Switching Transient
V
260
mV
P-P
TRAN
Note 2: Limits are 100% production tested at T = +25°C. Limits over the operating temperature range are guaranteed by design.
A
Note 3: Disabled output resistance includes the internal feedback network.
Note 4: Input test signal is NTSC composite with 5-step staircase, of 40 IRE per step, modulated with 3.58MHz color subcarrier.
Note 5: See the Timing Diagram (Figure 2).
Note 6: Channel-switching time specified for switching between input channels; does not include signal rise/fall times for switching
between channels with different input voltages.
Note 7: Output enable/disable delay times do not include amplifier output slewing times.
Note 8: Switching transient measured while switching between two grounded channels.
_______________________________________________________________________________________
3
225MHz, Triple, 2-Channel Video
Multiplexer-Amplifier
Typical Operating Characteristics
(V
= +5V, V = -5V, R = 150 to GND, T = +25°C, unless otherwise noted.)
EE L A
CC
SMALL-SIGNAL GAIN FLATNESS
vs. FREQUENCY
SMALL-SIGNAL FREQUENCY RESPONSE
LARGE-SIGNAL FREQUENCY RESPONSE
3
2
1
0
0.3
0.2
3
2
V
A
= 20mV
P-P
V
A
= 20mV
P-P
IN_ _
A = +2V/V
V
IN_ _
= +2V/V
= +2V/V
V
V
0.1
1
V
= 2V
P-P
OUT_
0
0
-1
-2
-3
-4
-5
-6
-7
-0.1
-0.2
-0.3
-0.4
-0.5
-0.6
-0.7
-1
-2
-3
-4
-5
-6
-7
V
OUT_
= 4V
P-P
1M
10M
100M
1G
1M
10M
100M
1G
1M
10M
100M
1G
FREQUENCY (Hz)
FREQUENCY (Hz)
FREQUENCY (Hz)
LARGE-SIGNAL GAIN FLATNESS
vs. FREQUENCY
CHANNEL-TO-CHANNEL GAIN MATCHING
vs. FREQUENCY
DIFFERENTIAL GAIN AND PHASE
0.020
0.010
0
0.5
0.4
0.3
0.2
V
= 2V
P-P
A
= +2V/V
OUT_
V
0.3
0.1
-0.010
-0.020
V
= 2V
P-P
OUT_
0.2
0
0.1
-0.1
-0.2
-0.3
-0.4
-0.5
-0.6
-0.7
1st
2nd
3rd
4th
5th
6th
0
-0.1
-0.2
-0.3
-0.4
-0.5
0.020
0.010
0
V
= 4V
P-P
OUT_
-0.010
-0.020
1st
2nd
3rd
4th
5th
6th
1M
10M
100M
1M
10M
100M
1G
FREQUENCY (Hz)
FREQUENCY (Hz)
POWER-SUPPLY REJECTION RATIO
vs. FREQUENCY
CHANNEL-TO-CHANNEL CROSSTALK
vs. FREQUENCY
OFF-ISOLATION vs. FREQUENCY
-20
-25
-30
-35
-40
-45
-50
-55
-60
-65
0
-20
0
-10
-20
-30
-40
-50
-60
-70
-80
-40
-60
PSRR-
-80
-100
-120
PSRR+
100k
1M
10M
100M
1M
10M
100M
1G
100k
1M
10M
100M
1G
FREQUENCY (Hz)
FREQUENCY (Hz)
FREQUENCY (Hz)
4
_______________________________________________________________________________________
225MHz, Triple, 2-Channel Video
Multiplexer-Amplifier
Typical Operating Characteristics (continued)
(V
= +5V, V = -5V, R = 150 to GND, T = +25°C, unless otherwise noted.)
EE L A
CC
TOTAL HARMONIC DISTORTION
vs. FREQUENCY
A/B CROSSTALK vs. FREQUENCY
OUTPUT IMPEDANCE vs. FREQUENCY
0
-20
-40
-60
-80
100
10
-20
-30
-40
-50
-60
-70
-80
-90
V
= 2V
P-P
OUT_
1
0.1
0.01
-100
-120
100k
1M
10M
100M
1G
100k
1M
10M
100M
1G
1M
10M
FREQUENCY (Hz)
100M
FREQUENCY (Hz)
FREQUENCY (Hz)
LARGE-SIGNAL PULSE RESPONSE
(C = 20pF)
LARGE-SIGNAL PULSE RESPONSE
SMALL-SIGNAL PULSE RESPONSE
LOAD
MAX4027 toc13
MAX4027 toc14
MAX4027 toc15
V
V
IN_ _
500mV/div
IN_ _
50mV/div
V
IN_ _
500mV/div
0V
0V
0V
0V
0V
0V
V
V
OUT_
1V/div
OUT_
100mV/div
V
OUT_
1V/div
10ns/div
10ns/div
10ns/div
SMALL-SIGNAL PULSE RESPONSE
ENABLE RESPONSE TIME
A/B SWITCHING TRANSIENT
MAX4027 toc18
(C
= 20pF)
LOAD
MAX4027 toc17
MAX4027 toc16
EN
2.5V/div
A/B
2.5V/div
V
IN_ _
50mV/div
0V
0V
0V
0V
0V
0V
V
V
V
OUT_
1V/div
OUT_
100mV/div
OUT_
100mV/div
20ns/div
20ns/div
10ns/div
_______________________________________________________________________________________
5
225MHz, Triple, 2-Channel Video
Multiplexer-Amplifier
Typical Operating Characteristics (continued)
(V
= +5V, V = -5V, R = 150 to GND, T = +25°C, unless otherwise noted.)
EE L A
CC
INPUT BIAS CURRENT
vs. TEMPERATURE
POSITIVE OUTPUT SWING
vs. TEMPERATURE
SUPPLY CURRENT vs. TEMPERATURE
35
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
5.0
4.5
4.0
3.5
3.0
2.5
34
33
32
31
30
29
28
27
26
25
-50
-25
0
25
50
75
100
-50
-25
0
25
50
75
100
-50
-25
0
25
50
75
100
TEMPERATURE ( C)
TEMPERATURE ( C)
TEMPERATURE ( C)
NEGATIVE OUTPUT SWING
vs. TEMPERATURE
INPUT OFFSET VOLTAGE
vs. TEMPERATURE
-2.5
-3.0
-3.5
-4.0
-4.5
-5.0
4
3
2
R
= 50
LOAD
1
R
= 150
LOAD
0
-1
-2
-3
-4
NO LOAD
-50
-25
0
25
50
75
100
-50
-25
0
25
50
75
100
TEMPERATURE ( C)
TEMPERATURE ( C)
OUTPUT SHORT-CIRCUIT CURRENT
vs. TEMPERATURE
SMALL-SIGNAL BANDWIDTH
vs. FREQUENCY
160
155
150
145
140
135
130
125
3
2
V
A
= 20mV
P-P
IN_ _
= +2V/V
SOURCING AND SINKING
15pF
10pF
V
1
0
-1
-2
-3
-4
-5
-6
-7
0pF
5pF
-50
-25
0
25
50
75
100
1M
10M
100M
1G
TEMPERATURE ( C)
FREQUENCY (Hz)
6
_______________________________________________________________________________________
225MHz, Triple, 2-Channel Video
Multiplexer-Amplifier
Pin Description
PIN
1
NAME
IN1A
IN2A
IN3A
GND
IN1B
IN2B
IN3B
FUNCTION
Amplifier 1 Channel A Input
2
Amplifier 2 Channel A Input
3
Amplifier 3 Channel A Input
4
Power Supply, Analog and Digital Ground. Connect GND to ground plane for best RF performance.
5
Amplifier 1 Channel B Input
Amplifier 2 Channel B Input
Amplifier 3 Channel B Input
6
7
Output Enable Logic Input. Drive EN low or leave open for normal operation. Pull EN high to disconnect
amplifier output (output is high impedance when disabled). EN is internally pulled to GND through a 17k
resistor.
8
EN
9
OUT3
Amplifier Output 3
10
11
12
13
V
Negative Power-Supply Voltage. Bypass V to GND with a 0.1µF capacitor.
EE
EE
OUT2
Amplifier Output 2
V
Positive Power-Supply Voltage. Bypass V
Amplifier Output 1
to GND with a 0.1µF capacitor.
CC
CC
OUT1
Channel-Select Input. Drive A/B low or leave open to select channel A for all amplifiers. Pull A/B high to select
channel B for all amplifiers. A/B is internally pulled to GND through a 17k resistor.
14
A/B
Detailed Description
Truth Tables
Table 1. Input Control Logic
The MAX4027 combines three 2:1 multiplexers with
+2V/V (+6dB) closed-loop gain (A ) amplifiers. This
VCL
low-power, high-speed device operates from 5V sup-
plies, while driving up to two back-terminated video
loads with very low distortion. Differential gain and
phase errors are 0.012%/0.014° for the MAX4027.
A/B
0
AMPLIFIER INPUT
FUNCTION
IN_A
IN_B
Channel A Selected
Channel B Selected
1
The input multiplexers feature fast 15ns channel-
switching times and small switching transients. The
multiplexers also feature high input resistance and con-
stant input capacitance, so overall input impedance
can be set by external input-terminating resistors.
Table 2. Output Control Logic
EN
AMPLIFIER OUTPUT
FUNCTION
0
On
Outputs Enabled
Outputs High
Impedance
Drive EN high to place the amplifier outputs in a high-
impedance state, and minimize the supply current. This
function allows use of multiple mux/amps in parallel to
form large switching arrays.
1
Off
Applications Information
The MAX4027 features an A/B input, which selects
either channel A or B. Drive A/B low to select channel A
or drive A/B high to select channel B. Channel A is
automatically selected if A/B is left unconnected.
Disable Mode
Drive EN high to place the MAX4027 in disable mode.
Placing the device in disable mode reduces the quies-
cent current to 17mA (V ) and 15mA (V ) and places
CC
EE
the amplifier outputs into a high-impedance state, typi-
_______________________________________________________________________________________
7
225MHz, Triple, 2-Channel Video
Multiplexer-Amplifier
cally 1.6k . Parallel multiple devices to construct larger
switch matrices by connecting the outputs of several
devices together and disabling all but one of the paral-
leled amplifiers’ outputs. Two internal 800 thin-film
resistors set the MAX4027 to a fixed gain of +2.
Consider the impedance of the internal feedback resis-
tors when operating multiple MAX4027s in large multi-
plexer applications.
Layout and Power-Supply Bypassing
The MAX4027 has an extremely high bandwidth and
requires careful board layout. For best performance, use
constant-impedance microstrip or stripline techniques.
To realize the full AC performance of these high-speed
amplifiers, pay careful attention to power-supply
bypassing and board layout. The PC board should have
at least two layers: a signal and power layer on one
side, and a large, low-impedance ground plane on the
other side. The ground plane should be as free of voids
as possible. With multilayer boards, locate the ground
plane on an internal layer that incorporates no signal or
power traces.
Drive EN low for normal operation. EN has internal pull-
down circuitry. The MAX4027 is enabled when EN is
unconnected.
Video Line Driver
The MAX4027 is well suited to drive short coaxial trans-
mission lines when the cable is terminated at both ends
(Figure 1) where the fixed gain of +2 compensates for the
loss in the back termination. Cable frequency response
may cause variations in the flatness of the signal.
Observe the following guidelines when designing the
board regardless of whether or not a constant-imped-
ance board is used.
1) Do not use wire-wrap boards or breadboards.
2) Do not use IC sockets; they increase parasitic
capacitance and inductance.
Input Voltage Range
The guaranteed input voltage range is 1.25V.
Exceeding this value can cause unpredictable results,
including output clipping, excessive input current, and
switching delays.
3) Keep lines as short and as straight as possible. Do
not make 90° turns; round all corners.
4) Observe high-frequency bypassing techniques to
maintain the amplifier’s accuracy and stability.
Multiplexer
The input multiplexer (mux) is controlled by a 3.3V
TTL/CMOS-compatible control input (see the Truth
Tables). Input capacitance is a constant, low 2pF and
input resistance is 17k to GND for all input channels,
regardless of whether or not the channel is selected. All
logic levels (EN and A/B) default low if left unconnected.
5) Use surface-mount components. They generally
have shorter bodies and lower parasitic reactance,
yielding better high-frequency performance than
through-hole components.
The bypass capacitors should include a 0.1µF ceramic
surface-mount capacitor between each supply pin and
the ground plane, located as close to the package as
A/B
EN
75 CABLE
R
75
T
IN_A
OUT_
R
T
75 CABLE
75
R
T
75
75 CABLE
IN_B
R
T
75
MAX4027
Figure 1. Video Line Driver
_______________________________________________________________________________________
8
225MHz, Triple, 2-Channel Video
Multiplexer-Amplifier
possible. Optionally, place a 10µF tantalum capacitor
Functional Diagram
at the power-supply pins’ points of entry to the PC
board to ensure the integrity of incoming supplies. The
power-supply trace should lead directly from the tanta-
V
A/B
CC
lum capacitor to the V
and V pins.
EE
CC
EN
Use surface-mount resistors for input termination and
output back termination. Place the termination resistors
as close to the IC as possible.
IN1A
IN1B
MUX1
OUT1
TO A/B
MUX2
TO EN
IN2A
IN2B
OUT2
A/B
TO A/B
MUX3
t
t
SW
SW
CHANNEL A
CHANNEL B
CHANNEL A
OUT
TO EN
IN3A
IN3B
OUT3
EN
t
t
PDE
PDD
MAX4027
HIGH IMPEDANCE
GND
OUT
V
EE
Figure 2. Switching Timing Diagram
Chip Information
TRANSISTOR COUNT: 870
PROCESS: Bipolar
_______________________________________________________________________________________
9
225MHz, Triple, 2-Channel Video
Multiplexer-Amplifier
Package Information
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information
go to www.maxim-ic.com/packages.)
INCHES
MILLIMETERS
DIM
A
MIN
MAX
0.069
0.010
0.019
0.010
MIN
1.35
0.10
0.35
0.19
MAX
1.75
0.25
0.49
0.25
0.053
0.004
0.014
0.007
N
A1
B
C
e
0.050 BSC
1.27 BSC
E
0.150
0.228
0.016
0.157
0.244
0.050
3.80
5.80
0.40
4.00
6.20
1.27
E
H
H
L
VARIATIONS:
INCHES
1
MILLIMETERS
DIM
D
MIN
MAX
0.197
0.344
0.394
MIN
4.80
8.55
9.80
MAX
5.00
N
8
MS012
AA
TOP VIEW
0.189
0.337
0.386
D
8.75 14
10.00 16
AB
D
AC
D
C
A
B
0 -8
e
A1
L
FRONT VIEW
SIDE VIEW
PROPRIETARY INFORMATION
TITLE:
PACKAGE OUTLINE, .150" SOIC
APPROVAL
DOCUMENT CONTROL NO.
REV.
1
21-0041
B
1
10 ______________________________________________________________________________________
225MHz, Triple, 2-Channel Video
Multiplexer-Amplifier
Package Information (continued)
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information
go to www.maxim-ic.com/packages.)
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 ____________________ 11
© 2003 Maxim Integrated Products
Printed USA
is a registered trademark of Maxim Integrated Products.
相关型号：
MAX4027ESD+
Video Multiplexer, 1 Func, 3 Channel, BIPolar, PDSO14, 0.150 INCH, MS-012AB, SOIC-14
MAXIM
MAX4027ESD-T
Video Multiplexer, 1 Func, 3 Channel, BIPolar, PDSO14, 0.150 INCH, MS-012AB, SOIC-14
MAXIM
MAX4027EUD+
Video Multiplexer, 1 Func, 3 Channel, BIPolar, PDSO14, 4.40 MM, MO-153AB-1, TSSOP-14
MAXIM
©2020 ICPDF网 联系我们和版权申明