MAX40013 [MAXIM]
0.1V to 5.5V Input Voltage Range;型号: | MAX40013 |
厂家: | MAXIM INTEGRATED PRODUCTS |
描述: | 0.1V to 5.5V Input Voltage Range |
文件: | 总6页 (文件大小:632K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Evaluates: MAX40002–MAX40005
MAX40012–MAX40015
MAX40002–MAX40005
Evaluation Kits
General Description
Quick Start
The MAX40002–MAX40005 evaluation kits (EV kits) are
fully assembled and tested PC boards that evaluate
Required Equipment
Before beginning, the following equipment is needed:
the
comparators. The MAX40002ANS02–MAX40005ANS02
operate from a V supply between 1.7V to 5.5V, come
MAX40002ANS02–MAX40005ANS02
single
●
●
Three +5V DC power supplies (V /REF, IN, and V
)
PU
CC
One digital multimeter (DMM)
CC
with an internal reference voltage of 0.2V, and have a
wide 0.1V to 5.5V input voltage (IN) range. These EV kits
demonstrate the MAX40002ANS02–MAX40005ANS02 in
an ultra-small, 0.76mm x 0.76mm, 4-bump wafer-level
package (WLP) with 0.35mm bump spacing.
Procedure
The MAX40002–MAX40005 EV kits are fully assembled
andtested. Followthesestepstoverifyboardoperation. Do
not turn on the power supply until all connections are
completed.
These EV kits are configured to evaluate all devices in
the MAX40002–MAX40005/MAX40012–MAX40015 family
that have a 4-bump wafer-level package (WLP). To evalu-
ate other WLP devices in this MAX40002–MAX40005/
MAX40012–MAX40015 family other than what is pre-
installed, replace the U1 IC with the desired part (see
Ordering Information for details).
1) Connect the positive terminal of a DC power supply to
the V
pad and the ground terminal to the GND pad.
CC
2) Connect the positive terminal of a DC power supply to
the V pad and the ground terminal to the GND pad
PU
(MAX40002/MAX40003/MAX40012/MAX40013 only).
3) Connect the positive terminal of a DC power supply to
the IN pad and the ground terminal to the GND pad.
4) Turn on the V
desired level.
Features
● 0.1V to 5.5V Input Voltage Range
power supply and set it to the
CC
5) Turn on the V
power supply and set it to the
PU
● 1.7V to 5.5V External Reference Range
desired level (MAX40002/MAX40003/MAX40012/
MAX40013 only).
6) Turn on the IN power supply and set it to the
desired level.
7) Monitor the output using a DMM at the OUT pad,
and study its response to varying voltage at IN (see
Table 1 for more information).
(MAX40002ANS─MAX40005ANS)
● 1.7V to 5.5V V
Range with Internal Reference
CC
(MAX40002ANS_ _─MAX40005ANS_ _)
• 0.2V, 0.5V, 0.9V, and 1.222V Internal Reference
Options Available
● Evaluates 4-Bump WLP Package
● Fully Assembled and Tested
Ordering Information appears at the end of the data sheet.
19-8554; Rev 1; 2/20
Evaluates: MAX40002–MAX40005
MAX40012–MAX40015
MAX40002–MAX40005
Evaluation Kits
Table 1. How Devices Behave Under Various Input Voltage Conditions
INPUT VOLTAGE
CONDITIONS
PART
V
INPUT POLARITY
ACTION AT OUTPUT
REF
V
V
V
V
> V
< V
> V
< V
Output goes high
MAX40002,
MAX40004
MAX40012,
MAX40014
IN
IN
IN
IN
REF
Noninverting
Output goes low
Output goes low
Output goes high
Output goes high
Output goes low
REF
External
MAX40003,
MAX40005
MAX40013,
MAX40015
REF
Inverting
Noninverting
Inverting
REF
V
V
> V
< V
MAX40002,
MAX40004
MAX40012,
MAX40014
IN
REF _INT
REF _INT
IN
Internal
MAX40003,
MAX40005
MAX40013,
MAX40015
V
> V
Output goes low
Output goes high
IN
IN
REF _INT
REF _INT
V
< V
V
The V
Pad
Detailed Description of Hardware
The MAX40002–MAX40005 EV kits are fully assembled
and tested PC boards that evaluate the 4-bump WLP
MAX40002ANS02–MAX40005ANS02 comparators.
PU
pad on the EV kit is used to connect a pullup
PU
supply voltage up to 5.5V for the open-drain output
devices (MAX40002/MAX40003/MAX40012/MAX40013)
for proper operation. Remove R1 and eliminate V
evaluating the push-pull output devices (MAX40004/
MAX40005/MAX40014/MAX40015).
if
PU
V
/REF Supply Selection
CC
The V /REF pad on the EV kit is used to either supply a
CC
1.7V to 5.5V V
voltage (internal reference devices) or a
CC
1.7V to 5.5V external reference voltage to the IC. Refer to
the MAX40002–MAX40005 and MAX40012–MAX40015
data sheets for more information.
Ordering Information
V
(V)
SWAP U1 IC TO
EVALUATE
REF
PART*
U1 IC (INSTALLED)
TYPE
MAX40002EVKIT#
MAX40003EVKIT#
MAX40004EVKIT#
MAX40005EVKIT#
MAX40002ANS02+
MAX40003ANS02+
MAX40004ANS02+
MAX40005ANS02+
0.2
EV Kit
EV Kit
EV Kit
EV Kit
MAX40012
MAX40013
MAX40014
MAX40015
0.2
0.2
0.2
#Denotes RoHS-compliant
Maxim Integrated
│ 2
www.maximintegrated.com
Evaluates: MAX40002–MAX40005
MAX40012–MAX40015
MAX40002–MAX40005
Evaluation Kits
MAX40002–MAX40005 EV Kit Bill of Materials*
DNI/
DNP
ITEM REF_DES
QTY
MFG PART #
MFCTR
VALUE DESCRIPTION
CAPACITOR; SMT (0805); CERAMIC
GRM21BR71A475KA7 MURATA/TAI
3; LMK212B7475KG-T YO YUDEN
CHIP; 4.7UF; 10V; TOL=10%;
MODEL=GRM SERIES; TG=-55 DEGC
TO +125 DEGC; TC=X7R
1
2
3
C1
-
1
4.7UF
CAPACITOR; SMT (0603); CERAMIC
CHIP; 0.1UF; 25V; TOL=10%;
MODEL=C SERIES; TG=-55 DEGC TO
+125 DEGC; TC=X7R
C1608X7R1E104K080
C2, C4
-
-
2
3
TDK
AA
0.1UF
TEST POINT; PIN DIA=0.125IN;
TOTAL LENGTH=0.35IN; BOARD
HOLE=0.063IN; BLACK; PHOSPHOR
BRONZE WIRE SILVER PLATE
FINISH;
TEST POINT; PIN DIA=0.125IN;
TOTAL LENGTH=0.35IN; BOARD
HOLE=0.063IN; RED; PHOSPHOR
BRONZE WIRE SILVER PLATE
FINISH;
GND, TP1,
TP2
5006
KEYSTONE
KEYSTONE
N/A
N/A
IN, OUT,
VCC, VPU
4
5
-
4
1
5005
EVKIT PART-IC; COMP; 600NA; 4-
MAX4000 BUMP ULTRA-TINY COMPARATOR;
4ANS+ PACKAGE OUTLINE: 21-100103;
PACKAGE CODE: N40C0+1; WLP4
U1
C3
-
MAX40004ANS+
MAXIM
TDK
CAPACITOR; SMT (0603); CERAMIC
CHIP; 0.1UF; 25V; TOL=10%;
MODEL=C SERIES; TG=-55 DEGC TO
+125 DEGC; TC=X7R
RESISTOR; 0603; 100K OHM; 0.1%;
10PPM; 0.1W; THIN FILM
C1608X7R1E104K080
AA
6
7
DNP
0
0
0.1UF
R1, R2 DNP
PCB
ERA-3ARB104
MAX40004
PANASONIC
MAXIM
100K
PCB Board:MAX40004 EVALUATION
8
-
1
PCB
KIT
TOTAL
12
*Specified for the MAX40004. For other variants, change U1 to the desired device. All other components are the same.
Maxim Integrated
│ 3
www.maximintegrated.com
Evaluates: MAX40002–MAX40005
MAX40012–MAX40015
MAX40002–MAX40005
Evaluation Kits
MAX40002–MAX40005 EV Kit PCB Layout Diagrams*
MAX40002–MAX40005 EV Kit—Top
MAX40002–MAX40005 EV Kit—Top Silkscreen
MAX40002–MAX40005 EV Kit—Bottom
MAX40002–MAX40005 EV Kit—Bottom Silkscreen
*Specified for the MAX40004. For other variants, change U1 to the desired device. All other components are the same.
Maxim Integrated
│ 4
www.maximintegrated.com
Evaluates: MAX40002–MAX40005
MAX40012–MAX40015
MAX40002–MAX40005
Evaluation Kits
MAX40002–MAX40005 EV Kit Schematic*
VPU
C4
0.1UF
DNI
R1
U1
MAX40004ANS02+
VCC
B1
VCC/REF
A2
A1
IN
OUT
OUT
TP1
GND
DNI
C3
GND
B2
C1
C2
4.7UF
0.1UF
IN
DNI
R2
TP2
*Specified for the MAX40004. For other variants, change U1 to the desired device. All other components are the same.
Maxim Integrated
│ 5
www.maximintegrated.com
Evaluates: MAX40002–MAX40005
MAX40012–MAX40015
MAX40002–MAX40005
Evaluation Kits
Revision History
REVISION REVISION
PAGES
CHANGED
DESCRIPTION
NUMBER
DATE
0
1
1/17
2/20
Initial release
—
Added MAX40012–MAX40015 part numbers to data sheet
1–6
For pricing, delivery, and ordering information, please visit Maxim Integrated’s online storefront at https://www.maximintegrated.com/en/storefront/storefront.html.
Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent licenses
are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time.
©
Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc.
2020 Maxim Integrated Products, Inc.
│ 6
相关型号:
©2020 ICPDF网 联系我们和版权申明