MAX2602ESA+T [MAXIM]
RF Power Bipolar Transistor, 1-Element, Ultra High Frequency Band, Silicon, NPN, PSOP-8;型号: | MAX2602ESA+T |
厂家: | MAXIM INTEGRATED PRODUCTS |
描述: | RF Power Bipolar Transistor, 1-Element, Ultra High Frequency Band, Silicon, NPN, PSOP-8 晶体 晶体管 |
文件: | 总6页 (文件大小:84K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
19-1185; Rev 3; 9/08
3.6V, 1W RF Power Transistors
for 900MHz Applications
1/MAX602
General Description
____________________________Features
The MAX2601/MAX2602 are RF power transistors opti-
mized for use in portable cellular and wireless equipment
that operates from three NiCd/NiMH cells or one Li-Ion
cell. These transistors deliver 1W of RF power from a
3.6V supply with efficiency of 58% when biased for con-
stant-envelope applications (e.g., FM or FSK). For NADC
(IS-54) operation, they deliver 29dBm with -28dBc ACPR
from a 4.8V supply.
♦ Low Voltage: Operates from 1 Li-Ion or
3 NiCd/NiMH Batteries
♦ DC-to-Microwave Operating Range
♦ 1W Output Power at 900MHz
♦ On-Chip Diode for Accurate Biasing (MAX2602)
♦ Low-Cost Silicon Bipolar Technology
♦ Does Not Require Negative Bias or Supply Switch
♦ High Efficiency: 58%
The MAX2601 is a high-performance silicon bipolar RF
power transistor. The MAX2602 includes a high-
performance silicon bipolar RF power transistor, and a
biasing diode that matches the thermal and process
characteristics of the power transistor. This diode is
used to create a bias network that accurately controls
the power transistor’s collector current as the tempera-
ture changes.
The MAX2601/MAX2602 can be used as the final stage
in a discrete or module power amplifier. Silicon bipolar
technology eliminates the need for voltage inverters
and sequencing circuitry, as required by GaAsFET
power amplifiers. Furthermore, a drain switch is not
required to turn off the MAX2601/MAX2602. This
increases operating time in two ways: it allows lower
system end-of-life battery voltage, and it eliminates the
wasted power from a drain-switch device.
Ordering Information
PART
MAX2601ESA
MAX2602ESA
TEMP RANGE
-40°C to +85°C
-40°C to +85°C
PIN-PACKAGE
8 SOIC
8 SOIC
The MAX2601/MAX2602 are available in thermally
enhanced, 8-pin SO packages, which are screened to
the extended temperature range (-40°C to +85°C).
________________________Applications
Narrow-Band PCS (NPCS)
915MHz ISM Transmitters
Microcellular GSM (Power Class 5)
AMPS Cellular Phones
Pin Configurations
TOP VIEW
C
1
C
E
8
7
6
5
C
E
E
B
1
2
3
4
8
7
6
5
C
E
E
B
E
2
Digital Cellular Phones
E
3
BIAS
B
Two-Way Paging
B
4
CDPD Modems
MAX2601
PSOPII
MAX2602
PSOPII
Land Mobile Radios
Typical Application Circuit appears at end of data sheet.
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
3.6V, 1W RF Power Transistors
for 900MHz Applications
ABSOLUTE MAXIMUM RATINGS
Collector-Emitter Voltage, Shorted Base (V
)....................17V
Operating Temperature Range ...........................-40°C to +85°C
Storage Temperature Range.............................-65°C to +165°C
Junction Temperature......................................................+150°C
Lead Temperature (soldering, 10s) .................................+300°C
CES
Emitter Base Reverse Voltage (V
)...................................2.3V
EBO
BIAS Diode Reverse Breakdown Voltage (MAX2602) ..........2.3V
Average Collector Current (I )........................................1200mA
C
Continuous Power Dissipation (T = +70°C)
A
SOIC (derate 80mW/°C above +70°C) (Note 1) .............6.4W
Note 1: Backside slug must be properly soldered to ground plane (see Slug Layout Techniques section).
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
DC ELECTRICAL CHARACTERISTICS
(T = T
A
to T
, unless otherwise noted.)
MAX
MIN
PARAMETER
SYMBOL
BV
CONDITIONS
Open base
Shorted base
MIN
15
TYP
MAX
UNITS
CEO
Collector-Emitter Breakdown
Voltage
I
I
< 100µA
V
C
BV
15
CES
1/MAX602
Collector-Emitter Sustaining
Voltage
LV
BV
= 200mA
5.0
V
V
CEO
C
Collector-Base Breakdown
Voltage
I
I
< 100µA, emitter open
15
CBO
C
DC Current Gain
h
FE
= 250mA, V = 3V
100
C
CE
Collector Cutoff Current
Output Capacitance
I
V
CE
V
CB
= 6V, V = 0V
0.05
9.6
1.5
µA
pF
CES
BE
C
= 3V, I = 0mA, f = 1MHz
E
OB
AC ELECTRICAL CHARACTERISTICS
(Test Circuit of Figure 1, V
erwise noted.)
= 3.6V, V = 0.750V, Z
BB
= Z
= 50Ω, P
= 30dBm, f = 836MHz, T = +25°C, unless oth-
OUT A
CC
LOAD
SOURCE
PARAMETER
Frequency Range
Base Current
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
GHz
mA
f
(Note 2)
DC
1
I
B
4.2
-43
-42
11.6
58
V
V
P
= 3.6V, P
= 3.0V, P
= 30dBm
= 29dBm
dBc
CC
OUT
OUT
Harmonics
2fo, 3fo
CC
Power Gain
= 30dBm
dB
%
OUT
η
Collector Efficiency
No modulation
Stability under Continuous
Load Mismatch Conditions
V
SWR
V
CC
= 5.5V, all angles (Note 3)
8:1
IM3
IM5
NF
-16
-25
3.3
P
= +30dBm total power, f1 = 835MHz,
OUT
Two-Tone IMR
dBc
dB
f2 = 836MHz
Noise Figure
V
BB
= 0.9V
Note 2: Guaranteed by design.
Note 3: Under these conditions: a) no spurious oscillations shall be observed at collector greater than -60dBc; b) no parametric
degradation is observable when mismatch is removed; and c) no current draw in excess of the package dissipation
capability is observed.
2
_______________________________________________________________________________________
3.6V, 1W RF Power Transistors
for 900MHz Applications
1/MAX602
__________________________________________Typical Operating Characteristics
(Test Circuit of Figure 1, input/output matching networks optimized for specific measurement frequency, V
= 3.6V, V = 0.750V,
BB
CC
P
OUT
= 30dBm, Z
= Z
= 50Ω, f = 836MHz, T = +25°C, unless otherwise noted.)
LOAD
SOURCE
A
TWO-TONE OUTPUT POWER AND IM3
vs. COLLECTOR CURRENT
TWO-TONE OUTPUT POWER, IM3, IM5
vs. INPUT POWER
COLLECTOR CURRENT
31
30
29
28
27
20
19
18
17
16
1.0
0.8
0.6
0.4
0.2
0
35
25
15
5
P
, IM3, AND IM5
P
OUT
, IM3, AND IM5
OUT
P
OUT
ARE RMS COMPOSITE
TWO-TONE POWER
LEVELS
ARE RMS COMPOSITE
TWO-TONE POWER LEVELS
P
OUT
V
= 1.00V
V
BB
= 0.95V
BB
IM3
V
BB
= 0.90V
IM3
IM5
V
= 0.85V
BB
V
= 0.80V
5
BB
-5
0.4
0.5
0.6
(A)
0.7
0.8
0
1
2
3
4
6
5
10
15
INPUT POWER (dBm)
20
25
I
V
(V)
CC
CE
ACPR vs. OUTPUT POWER
(IS-54 π/4 DQPSK MODULATION, V = 0.85V)
-20
COLLECTOR EFFICIENCY vs. OUTPUT POWER
(IS-54 π/4 DQPSK MODULATION, V = 0.85V)
TWO-TONE OUTPUT POWER, IM3, IM5
vs. INPUT POWER (f = 433MHz)
BB
BB
60
50
40
30
20
10
0
35
25
15
5
P
, IM3, AND IM5
OUT
P
OUT
3.0V
-22
-24
-26
ARE RMS COMPOSITE
TWO-TONE POWER
LEVELS
3.0V
3.6V
P
, IM3, AND IM5
OUT
IM3
-28
-30
-32
-34
-36
-38
-40
ARE RMS COMPOSITE
TWO-TONE
3.6V
4.2V
4.2V
POWER LEVELS
IM5
4.8V
4.8V
-5
10
15
20
25
30
35
10
15
20
25
30
35
5
10
15
INPUT POWER (dBm)
20
25
OUTPUT POWER (dBm)
OUTPUT POWER (dBm)
______________________________________________________________Pin Description
PIN
NAME
FUNCTION
MAX2601
MAX2602
1, 8
1, 8
C
E
Transistor Collector
Transistor Emitter
2, 3, 6, 7, Slug
2, 6, 7, Slug
Anode of the Biasing Diode that matches the thermal and process char-
acteristics of the power transistor. Requires a high-RF-impedance, low-
DC-impedance (e.g., inductor) connection to the transistor base (Pin 4).
Current through the biasing diode (into Pin 3) is proportional to 1/15 the
collector current in the transistor.
—
3
BIAS
B
4, 5
4, 5
Transistor Base
_______________________________________________________________________________________
3
3.6V, 1W RF Power Transistors
for 900MHz Applications
V
CC
V
BB
5Ω
1000pF
0.1μF
L1
0.1μF
1000pF
24Ω
100nH
1000pF
1
8
4
5
T2
1000pF
RF
IN
10pF
2pF
T1
2, 6, 7
BACKSIDE
SLUG
2pF
12pF
L1 = COILCRAFT A05T INDUCTOR, 18.5nH
T1, T2 = 1", 50Ω TRANSMISSION LINE ON FR-4
1/MAX602
Figure 1. Test Circuit
_______________Detailed Description
MAX2601/MAX2602
The MAX2601/MAX2602 are high-performance silicon
bipolar transistors in power-enhanced, 8-pin SO pack-
ages. The base and collector connections use two pins
each to reduce series inductance. The emitter connects
to three (MAX2602) or four (MAX2601) pins in addition
to a back-side heat slug, which solders directly to the
PC board ground to reduce emitter inductance and
improve thermal dissipation. The transistors are intend-
ed to be used in the common-emitter configuration for
V
V
CC
CC
R
RF
BIAS
C
RF
OUT
C
OUT
RF
C
maximum
efficiency.
power
gain
and
power-added
Q1
Q2
C
BIAS
C
IN
Current Mirror Bias
(MAX2602 only)
RF
IN
The MAX2602 includes a high-performance silicon
bipolar RF power transistor and a thermally matched
biasing diode that matches the power transistor’s ther-
mal and process characteristics. This diode is used to
create a bias network that accurately controls the
power transistor’s collector current as the temperature
changes (Figure 2).
Figure 2. Bias Diode Application
temperature variations. Simply tying the biasing diode
to the supply through a resistor is adequate in most sit-
uations. If large supply variations are anticipated, con-
nect the biasing diode to a reference voltage through a
resistor, or use a stable current source. Connect the
biasing diode to the base of the RF power transistor
through a large RF impedance, such as an RF choke
(inductor), and decouple to ground through a surface-
mount chip capacitor larger than 1000pF.
The biasing diode is a scaled version of the power tran-
sistor’s base-emitter junction, in such a way that the
current through the biasing diode is 1/15 the quiescent
collector current of the RF power transistor. Supplying
the biasing diode with a constant current source and
connecting the diode’s anode to the RF power transis-
tor’s base ensures that the RF power transistor’s quies-
cent collector current remains constant through
4
_______________________________________________________________________________________
3.6V, 1W RF Power Transistors
for 900MHz Applications
1/MAX602
Slug Layout Techniques
Applications Information
The most important connection to make to the
MAX2601/MAX2602 is the back side. It should connect
directly to the PC board ground plane if it is on the top
side, or through numerous plated through-holes if the
ground plane is buried. For maximum gain, this con-
nection should have very little self-inductance. Since it
is also the thermal path for heat dissipation, it must
have low thermal impedance, and the ground plane
should be large.
Optimum Port Impedance
The source and load impedances presented to the
MAX2601/MAX2602 have a direct impact upon its gain,
output power, and linearity. Proper source- and load-
terminating impedances (Z and Z ) presented to the
S
L
power transistor base and collector will ensure optimum
performance.
For a power transistor, simply applying the conjugate of
the transistor’s input and output impedances calculated
from small-signal S-parameters will yield less than opti-
mum device performance.
For maximum efficiency at V
= 0.75V and V
=
CC
BB
3.6V, the optimum power-transistor source and load
impedances (as defined in Figure 3) are:
4
3
2
1
At 836MHz: Z = 5.5 + j2.0
S
MAX2601
MAX2602
Z = 6.5 + j1.5
L
2.8nH
2.8nH
2.8nH
At 433MHz: Z = 9.5 - j2.5
S
Z = 8.5 - j1.5
L
Z
and Z reflect the impedances that should be pre-
L
S
sented to the transistor’s base and collector. The pack-
age parasitics are dominated by inductance (as shown
in Figure 3), and need to be accounted for when calcu-
2.8nH
Z
S
Z
L
lating Z and Z .
S
L
5
6
7
8
The internal bond and package inductances shown
in Figure 3 should be included as part of the end-
application matching network, depending upon exact
layout topology.
Figure 3. Optimum Port Impedance
Package Information
For the latest package outline information and land patterns, go
to www.maxim-ic.com/packages.
PACKAGE TYPE PACKAGE CODE DOCUMENT NO.
8 SOIC
S8E-12
21-0041
_______________________________________________________________________________________
5
3.6V, 1W RF Power Transistors
for 900MHz Applications
Revision History
REVISION
NUMBER
REVISION
DATE
PAGES
CHANGED
DESCRIPTION
2
3
5/97
9/08
—
—
1
Removed die version from Ordering Information
1/MAX602
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
6 _____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2008 Maxim Integrated Products
Maxim is a registered trademark of Maxim Integrated Products, Inc.
相关型号:
MAX2602EVKIT
300Msps.12-Bit DAC with Complementary Voltage Outputs[MAX555/MAX555CCB/MAX555CCB-T/MAX555EVKIT ]
MAXIM
©2020 ICPDF网 联系我们和版权申明