MAX17579EVKIT [MAXIM]
in -15V and -5V Output-Voltage Applications;型号: | MAX17579EVKIT |
厂家: | MAXIM INTEGRATED PRODUCTS |
描述: | in -15V and -5V Output-Voltage Applications |
文件: | 总14页 (文件大小:970K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Click here to ask about the production status of specific part numbers.
MAX17579EVKIT#, MAX17580EVKIT# Evaluate: MAX17579 and MAX17580
Evaluation Kits
in -15V and -5V Output-Voltage
Applications
General Description
Features
● Operates Over a Wide Input Range
The MAX17579EVKIT# and MAX17580EVKIT# evalua-
tion kits (EV kits) provide a proven design to evaluate the
MAX17579 and MAX17580 high-efficiency, high-voltage,
inverting, Himalaya synchronous DC-DC converters. The
• MAX17579EVKIT#: V
= -15V, I
= 240mA,
= 300mA,
OUT2
OUT1
OUT1
V
IN1
Range = 16V to 45V
• MAX17580EVKIT#: V
= -5V, I
OUT2
V
IN2
Range = 16V to 55V
devices generate output voltages (V
) from -0.9V to
OUT
-36V and can deliver up to 300mA of load current from a
wide 4.5V to 60V-|V | input voltage range.
● Enable/UVLO Input, Resistor Programmable UVLO
OUT
Threshold
The MAX17579EVKIT# EV kit generates -15V output
(V ) at load currents up to 240mA from a 16V to 45V
● Adjustable Soft-Start Time
OUT1
● RESET Output with a Pullup Resistor to an External
input supply and operates at 600kHz (f
) switching
SW1
Supply
frequency. This EV kit configuration features MAX17579
that operates in continuous conduction mode (CCM) at
all loads, thus, providing a constant frequency operation.
● System Ground Interfaced EN/UVLO and RESET Pins
● Overcurrent and Overtemperature Protection
● Proven PCB Layout
The MAX17580EVKIT# EV kit generates -5V output
(V
) at load currents up to 300mA from a 16V to 55V
OUT2
● Fully Assembled and Tested
input supply and operates at 600kHz (f
) switching
SW2
● Complies with CISPR 32 (EN55032) Class B
frequency. This EV kit configuration features MAX17580
that operates in discontinuous conduction mode (DCM)
for superior efficiency at light loads.
Conducted and Radiated Emissions
The EV kits are configured for optimum efficiency and
component size. The EV kits feature programmable
enable and input undervoltage-lockout (UVLO), soft-
start, open-drain RESET signal and external clock syn-
chronization. The EV kits also provide a good layout
example, which are optimized for conducted, radiated
EMI, and thermal performance. For more details about
the device Benefits and Features, refer to the MAX17579,
MAX17580 IC data sheet.
Ordering Information appears at end of data sheet.
319-100744; Rev 0; 4/21
MAX17579EVKIT#, MAX17580EVKIT#
Evaluation Kits
Evaluate: MAX17579 and MAX17580
in -15V and -5V Output-Voltage
Applications
Quick Start
Detailed Description of Hardware
The MAX17579EVKIT# and MAX17580EVKIT# EV kits are
designed to demonstrate the salient features of MAX17579
and MAX17580 devices, respectively. These two circuits
are electrically isolated from each other and hosted on
the same PCB. Each of the devices can be evaluated by
powering them from their respective input pins. Individual
device settings can be adjusted to evaluate their perfor-
mance under different operating conditions.
Recommended Equipment
● MAX17579EVKIT#, MAX17580EVKIT#
● 60V, 0.5A DC input power supply
● 5V, 10mA DC input power supply
● Loads capable of sinking 300mA at -5V and 240mA
at -15V
● Two digital multimeters (DMM)
Soft-Start Input (SS)
Equipment Setup and Test Procedure
The EV kits are fully assembled and tested.
The EV kits offer an adjustable soft-start function to limit
inrush current during startup. The soft-start time is adjust-
ed by the value of external soft-start capacitor connected
between SS and SOUT pins. The selected output capaci-
Use the following steps to verify and test individual device
operation.
tance (C
) and the output voltage (V
OUT
) determine
OUT
Caution: Do not turn on the power supply until all
connections are completed.
the minimum required soft-start capacitor C
C212) as follows:
(C112,
SS
-6
C
≥ 139 x 10 x C
x V
1) Set the 60V input power supply at 15V for MAX-
17579EVKIT# and MAX17580EVKIT#. Disable the
power supply.
2) Connect the positive terminal of the 60V power sup-
ply to the VIN PCB pad and the negative terminal to
the nearest GND PCB pad.
3) Connect the positive terminal of the 5V power supply
to the respective VEXT PCB pad and the negative
terminal to the nearest GND PCB pad. Set the volt-
age at 5V.
4) Connect the positive terminal of the corresponding
load to the respective GND PCB pad and the nega-
tive terminal to the nearest VOUT PCB pad.
5) Connect one DMM across the respective VOUT PCB
pad and the nearest GND PCB pad, and the another
SS
OUT OUT
The soft-start time (t ) is related to the capacitor con-
nected at SS (C ) by the following equation:
SS
SS
C
SS
t
=
SS
−6
5.55×10
For example, to program a 1ms soft-start time, a 5600pF
capacitor should be connected from the SS pin to SOUT.
Enable/Undervoltage-Lockout (EN/UVLO)
Programming
The MAX17579 and MAX17580 offer an enable and
adjustable input UVLO feature. In these EV kits, for nor-
mal operation, leave the EN/UVLO jumpers (J101, J201)
open. When jumpers are left open, the MAX17579 and
MAX17580 are enabled when the input voltage rises
above 15.7V. To disable the devices, install shunts across
pins 2–3 on the jumpers (J101, J201). See Table 1 for
jumper (J101, J201) settings. The EN/UVLO PCB pad on
the EV kits support external Enable/Disable control of the
device. Leave the jumpers open when external Enable/
Disable control is desired. A potential divider formed by
DMM across the respective RESET pad and GND pad
6) Verify that no shunts are installed on jumpers
(J101, J201) See Table 1 for details.
7) Turn on the DC power supply.
8) Enable the load.
.
9) Observe that both the DMMs display 0V.
10) Increase the input voltage to be above 16V or higher,
which is above the EN/UVLO rising threshold.
11) Verify that the DMM across the output terminal
displays -15V for MAX17579EVKIT# or -5V for
MAX17580EVKIT#.
the resistors R
(R101, R201) and R
(R102, R202) at the EN/UVLO pin sets the input voltage
(V ) above which the converter is enabled when the
UVL_TOP
UVL_BOT
INU
jumpers are left open.
12) Verify that the DMM across the RESET pad and
GND displays 5V.
13) Reduce the input voltage to 12V which is below the
EN/UVLO falling threshold.
14) Verify that both the DMMs displays 0V.
15) Disable the input power supply.
Choose R to be 3.32MΩ (max), and then calcu-
UVL_TOP
late R
as follows:
UVL_BOT
1.229×R
UVL_TOP
R
=
UVL_BOT
(V
−1.229)
INU
where, R
is in MΩ. For more details about
UVL_BOT
Setting the Input Undervoltage-Lockout Level, refer to the
MAX17579, MAX17580 IC data sheet.
Maxim Integrated
│ 2
www.maximintegrated.com
MAX17579EVKIT#, MAX17580EVKIT#
Evaluation Kits
Evaluate: MAX17579 and MAX17580
in -15V and -5V Output-Voltage
Applications
External Clock Synchronization (RT/SYNC)
Hot Plug-In and Long Input Cables
The EV kits provide RT/SYNC PCB pads to synchronize
the MAX17579 and MAX17580 to an optional external
clock. The external synchronization clock frequency must
The MAX17579EVKIT# and MAX17580EVKIT# PCB lay-
outs provide optional electrolytic capacitors (C108 = C208
= 22μF/80V). These capacitors limit the peak voltage at
the input of the corresponding device when the DC input
source is Hot-Plugged to the EV kit input terminals with
input cables. The equivalent series resistance (ESR) of
the electrolytic capacitors dampen the oscillations caused
by interaction of the inductance of the input cables, and
the ceramic capacitors at the converters input.
be between 1.1 x f
and 1.4 x f , where f
is the
SW
SW
SW
switching frequency programmed by the resistors (R105
and R205) connected to the RT/SYNC pin. For more
details about the External Clock Synchronization, refer to
the MAX17579, MAX17580 IC data sheet.
Active-Low, Open-Drain Reset
Output (RESET)
Inductive Output Short-Circuit Protection
The EV kits provide two PCB pads RESET1 and RESET2
to monitor the status of the respective converters. The
open-drain outputs are connected to 5V external power
supply (VEXT1, VEXT2) via pullup resistors (R106,
R206). RESET goes high 1024 switching cycles after the
output voltage rises above 95% (typ) of its set value and
it is driven low to respective GND when the output voltage
drops below 92% (typ) of its set value.
The MAX17579EVKIT# and MAX17580EVKIT# PCB
layouts provide footprints for optional R-D circuits (R107
and D101, R207 and D201) that are used for Inductive
Output Short-Circuit Protection. For more details, refer to
the MAX17579, MAX17580 IC data sheet.
Electromagnetic Interference (EMI)
Compliance to conducted emissions (CE) standards
requires an EMI filter at the input of a switching power
converter. The EMI filter attenuates high-frequency cur-
rents drawn by the switching power converter and limits
the noise injected back into the input power source.
Input Voltage Range
The MAX17579EVKIT# and MAX17580EVKIT# has a
default input voltage range starting from 16V. The oper-
ating input voltage range can be modified by changing
the values of the components connected at the FB, EN/
UVLO, and SS pins for the same inductor and output
capacitor. The deliverable output current also changes
with input voltage range. For more details about the Load
Current Capability, refer to the MAX17579, MAX17580
IC data sheet. Table 2 and Table 3 show the settings for
different input voltage ranges for MAX17579EVKIT# and
MAX17580EVKIT#, respectively.
The MAX17579EVKIT# and MAX17580EVKIT# PCBs
have designated footprints for placement of conducted EMI
filter components per the optional Bill of Materials (BoM).
Use of these filter components results in lower conducted
EMI, below CISPR 32 Class B limits. Cut open the trace at
L102 and L202 before installing EMI filter components. The
PCB layouts are also designed to limit radiated emissions
from switching nodes of the power converter, resulting in
radiated emissions below CISPR 32 Class B limits.
Table 1. Converter EN/UVLO Jumper (J101, J201) Settings
SHUNT POSITION
EN/UVLO PIN
OUTPUT
1-2
Connected to IN
Enabled
Connected to the center node of respective resistor-dividers
(R101 and R102; R201 and R202)
Enabled, UVLO level is set by the
resistor-divider between IN and GND
Not installed*
2-3
Connected to GND
Disabled
*Default position
Table 2. MAX17579EVKIT# EN/UVLO and FB Resistor Divider Settings
INPUT VOLTAGE RANGE
R101
R102
294kΩ
665kΩ
1.37MΩ
R103
412kΩ
536kΩ
523kΩ
R104
26.1kΩ
34kΩ
LOAD CURRENT
C112
5.6nF
5.6nF
10nF
16V to 45V*
3.32MΩ
3.32MΩ
3.32MΩ
240mA
8V to 45V
150mA
4.5V to 45V
33.2kΩ
80mA
*Default setting
Maxim Integrated
│ 3
www.maximintegrated.com
MAX17579EVKIT#, MAX17580EVKIT#
Evaluation Kits
Evaluate: MAX17579 and MAX17580
in -15V and -5V Output-Voltage
Applications
Table 3. MAX17580EVKIT# EN/UVLO and FB Resistor Divider Settings
INPUT VOLTAGE RANGE
R201
R202
294kΩ
665kΩ
1.37MΩ
R203
154kΩ
165kΩ
187kΩ
R204
LOAD CURRENT
C212
5.6nF
5.6nF
5.6nF
16V to 55V*
3.32MΩ
3.32MΩ
3.32MΩ
34kΩ
300mA
8V to 55V
36.5kΩ
41.2kΩ
240mA
4.5V to 55V
150mA
*Default setting
MAX17579EVKIT# and MAX17580EVKIT# EV Kit Performance Reports
(V
= V
= 24V, f
= f
SW2
= 600kHz, unless otherwise noted.)
IN1
IN2
SW1
MAX17580
EFFICIENCY vs. LOAD CURRENT
MAX17579
EFFICIENCY vs. LOAD CURRENT
MAX17579
LOAD AND LINE REGULATION
VOUT2 = -5V
VOUT1 = -15V
VOUT1 = -15V
TOC03
TOC01
TOC02
100
80
60
40
20
-14.95
-15.00
-15.05
-15.10
-15.15
100
80
60
40
20
VIN = 36V
VIN = 16V
VIN = 55V
VIN = 48V
VIN = 36V
VIN = 45V
VIN = 36V
VIN = 24V
VIN = 16V
VIN = 45V
VIN = 24V
VIN = 24V
VIN = 16V
300
0
60
120
180
240
10
100
0
60
120
180
240
LOAD CURRENT (mA)
LOAD CURRENT (mA)
LOAD CURRENT (mA)
MAX17579
MAX17579
MAX17580
LOAD AND LINE REGULATION
VOUT2 = -5V
LOAD TRANSIENT BETWEEN 120mA AND 240mA
LOAD TRANSIENT BETWEEN 0 AND 120mA
VOUT1 = -15V
VOUT1 = -15V
TOC04
TOC06
TOC05
-4.90
-4.95
-5.00
-5.05
VIN = 36V
VOUT(AC)
VOUT(AC)
VIN = 55V
VIN = 16V
500mV/div
500mV/div
240mA
120mA
VIN = 48V
VIN = 24V
120mA
100mA/div
0A
IOUT
IOUT
50mA/div
0
100
200
300
200µs/div
200µs/div
LOAD CURRENT (mA)
Maxim Integrated
│ 4
www.maximintegrated.com
MAX17579EVKIT#, MAX17580EVKIT#
Evaluation Kits
Evaluate: MAX17579 and MAX17580
in -15V and -5V Output-Voltage
Applications
MAX17579EVKIT# and MAX17580EVKIT# EV Kit Performance Reports (continued)
(V
= V
= 24V, f
= f = 600kHz, unless otherwise noted.)
SW2
IN1
IN2
SW1
MAX17579
STEADY STATE AT 240mA LOAD
VOUT1 = -15V
MAX17580
MAX17580
LOAD TRANSIENT BETWEEN 15mA AND 150mA
LOAD TRANSIENT BETWEEN 150mA AND 300mA
VOUT2 = -5V
VOUT2 = -5V
TOC07
TOC08
TOC09
VOUT(AC)
VOUT(AC)
VOUT(AC)
100mV/div
20V/div
100mV/div
100mV/div
150mA
300mA
VLX
150mA
100mA/div
15mA
50mA/div
IOUT
ILX
500mA/div
IOUT
1µs/div
200µs/div
200µs/div
MAX17580
STEADY STATE AT 15mA LOAD
MAX17579
STEADY STATE AT NO LOAD
MAX17580
STEADY STATE AT 300mA LOAD
V
OUT2 = -5V
VOUT1 = -15V
VOUT2 = -5V
TOC10
TOC11
TOC12
VOUT(AC)
VOUT(AC)
VOUT(AC)
50mV/div
20V/div
20mV/div
20V/div
50mV/div
20V/div
VLX
VLX
VLX
ILX
100mA/div
ILX
ILX
500mA/div
500mA/div
1µs/div
1µs/div
1µs/div
MAX17579
MAX17579
START UP & SHUT DOWN THROUGH EN/UVLO
MAX17579
START UP WITH PREBIAS VOLTAGE OF -7.5V
START UP & SHUT DOWN THROUGH EN/UVLO
VOUT1 = -15V
VOUT1 = -15V
VOUT1 = -15V
TOC14
TOC15
TOC13
VEN/UVLO
ILX
5V/div
5V/div
5V/div
ILX
500mA/div
500mA/div
ILX
500mA/div
10V/div
VOUT
VOUT
VOUT
-7.5V
10V/div
5V/div
10V/div
5V/div
-15V
VRESET
VRESET
VRESET
5V/div
1ms/div
1ms/div
1ms/div
CONDITIONS: 1.25kΩ RESISTIVE LOAD,
RESET IS PULLED UP TO 5V CONNECTED AT VEXT1
CONDITIONS: 1.25kΩ RESISTIVE LOAD,
CONDITIONS: 62.5Ω RESISTIVE LOAD,
RESET IS PULLED UP TO 5V CONNECTED AT VEXT1
RESET IS PULLED UP TO 5V CONNECTED AT VEXT1
Maxim Integrated
│ 5
www.maximintegrated.com
MAX17579EVKIT#, MAX17580EVKIT#
Evaluation Kits
Evaluate: MAX17579 and MAX17580
in -15V and -5V Output-Voltage
Applications
MAX17579EVKIT# and MAX17580EVKIT# EV Kit Performance Reports (continued)
(V
= V
= 24V, f
= f = 600kHz, unless otherwise noted.)
SW2
IN1
IN2
SW1
MAX17580
MAX17580
START UP & SHUT DOWN THROUGH EN/UVLO
MAX17580
START UP WITH PREBIAS VOLTAGE OF -2.5V
START UP & SHUT DOWN THROUGH EN/UVLO
VOUT2 = -5V
VOUT2 = -5V
VOUT2 = -5V
TOC16
TOC17
TOC18
VEN/UVLO
ILX
VEN/UVLO
ILX
VEN/UVLO
5V/div
5V/div
5V/div
ILX
200mA/div
200mA/div
500mA/div
5V/div
VOUT
VOUT
VOUT
-2.5V
5V/div
5V/div
5V/div
-5V
VRESET
VRESET
VRESET
5V/div
5V/div
1ms/div
CONDITIONS: 333.3Ω RESISTIVE LOAD,
RESET IS PULLED UP TO 5V CONNECTED AT VEXT2
1ms/div
1ms/div
CONDITIONS: 333.3Ω RESISTIVE LOAD,
CONDITIONS: 16.67Ω RESISTIVE LOAD,
RESET IS PULLED UP TO 5V CONNECTED AT VEXT2
RESET IS PULLED UP TO 5V CONNECTED AT VEXT2
MAX17579
OVERLOAD PROTECTION
MAX17580
MAX17579
EXTERNAL CLOCK SYNCHRONIZATION WITH 840kHz
EXTERNAL CLOCK SYNCHRONIZATION WITH 840kHz
VOUT1 = -15V
VOUT2 = -5V
VOUT1 = -15V
TOC21
TOC19
TOC20
VEXTSYNC
VOUT(AC)
VOUT
VEXTSYNC
VOUT(AC)
5V/div
5V/div
50mV/div
5V/div
200mV/div
VLX
VLX
20V/div
20V/div
500mA/div
500mA/div
ILX
ILX
ILX
500mA/div
20ms/div
10µs/div
CONDITIONS: 62.5Ω LOAD
10µs/div
CONDITIONS: 20Ω LOAD
CONDITIONS: 16.66Ω LOAD
MAX17580
OVERLOAD PROTECTION
VOUT2 = -5V
MAX17579
BODE PLOT, VOUT1 = -15V
MAX17580
BODE PLOT, VOUT2 = -5V
TOC22
TOC23
TOC24
30
15
0
120
60
30
120
60
PHASE
PHASE
VOUT
15
0
1V/div
0
0
GAIN
GAIN
-15
-30
-60
-120
-15
-30
-60
-120
GAIN CROSSOVER
GAIN CROSSOVER
ILX
500mA/div
FREQUENCY = 22.7kHz
FREQUENCY = 46.4kHz
PHASE MARGIN = 68.7°
PHASE MARGIN = 66.04°
20ms/div
1k
10k
100k
1k
10k
100k
CONDITIONS: 5Ω RESISTIVE LOAD
FREQUENCY (Hz)
CONDITIONS: 62.5Ω LOAD
FREQUENCY (Hz)
CONDITIONS: 16.67Ω LOAD
Maxim Integrated
│ 6
www.maximintegrated.com
MAX17579EVKIT#, MAX17580EVKIT#
Evaluation Kits
Evaluate: MAX17579 and MAX17580
in -15V and -5V Output-Voltage
Applications
MAX17579EVKIT# and MAX17580EVKIT# EV Kit Performance Reports (continued)
(V
= V
= 24V, f
= f
SW2
= 600kHz, unless otherwise noted.)
IN1
IN2
SW1
MAX17580 CONDUCTED EMISSIONS PLOT,
VOUT2 = -5V, LOAD = 300mA, fSW = 600kHz
MAX17580 RADIATED EMISSIONS PLOT,
VOUT2 = -5V, LOAD = 300mA, fSW = 600kHz
TOC25
TOC26
50
40
70
60
50
40
30
20
CISPR 32 CLASS B QP LIMIT
CISPR 32 CLASS B AVG LIMIT
CISPR 32 CLASS B QP LIMIT
VERTICAL SCAN
30
20
10
0
PEAK EMISSIONS
-10
-20
10
HORIZONTAL SCAN
AVERAGE EMISSIONS
1000
30
100
0.15
30
1
10
FREQUENCY (MHz)
FREQUENCY (MHz)
L202 = 22µH, C205 = 1µF/100V/1206/X7R
Component Suppliers
SUPPLIER
Wurth Electronics
Murata Americas
Panasonic Corp.
SullinsCorp
WEBSITE
www.we-online.com
www.murataamericas.com
www.panasonic.com
www.sullinscorp.com
www.tdk.com
TDK
Note: Indicate that you are using the MAX17579/MAX17580 when contacting these component suppliers.
Ordering Information
PART
TYPE
EV Kit
EV Kit
MAX17579EVKIT#
MAX17580EVKIT#
#Denotes RoHs compliance.
Maxim Integrated
│ 7
www.maximintegrated.com
MAX17579EVKIT#, MAX17580EVKIT#
Evaluation Kits
Evaluate: MAX17579 and MAX17580
in -15V and -5V Output-Voltage
Applications
MAX17579EVKIT# and MAX17580EVKIT# EV Kit Bill of Materials
S.No
QUANTITY
MANUFACTURER PART NUMBER
TDK C1005C0G2A151J050BA
MURATA GRM188R72A104KA35
PANASONIC EEE-FK1K220P
TDK C3216X7R2A105K160AA
MURATA GRM155R71E562KA01
MURATA GRM188R71A225KE15
MURATA GRM155R72A472KA01
MURATA GRM155R71E104KE14
MURATA GRM21BZ71E106KE15
TDK C1005X7R1E224K050BB
MURATA GRM1555C1H330JA01
MURATA GRM155R71A474KE01
MURATA GRM188Z71A106KA73
SULLINS PEC03SAAN
DESIGNATOR
C101, C201
C102, C111, C202, C211
C108, C208
C110, C210
C112, C212
C113, C213
C114, C214
C115, C116, C119, C215, C216, C219
C117
DESCRIPTION
1
2
4
2
2
2
2
2
6
1
1
2
3
1
2
1
1
2
2
1
1
2
2
2
1
1
150pF±5%; 100V; C0G; Ceramic Capacitor (0402)
0.1µF±10%; 100V; X7R; Ceramic Capacitor (0603)
22uF±20%, 80V, Electrolytic capacitor
2
3
4
1µF±10%; 100V; X7R; Ceramic Capacitor (1206)
5600pF±10%; 25V; X7R; Ceramic Capacitor (0402)
2.2µF±10%; 10V; X7R; Ceramic Capacitor (0603)
4700pF±10%; 100V; X7R; Ceramic Capacitor (0402)
0.1µF±10%; 25V; X7R; Ceramic Capacitor (0402)
10µF±10%; 25V; X7R; Ceramic Capacitor (0805)
0.22µF±10%; 25V; X7R; Ceramic Capacitor (0402)
33pF±5%; 50V; C0G; Ceramic Capacitor (0402)
0.47µF±10%; 10V; X7R; Ceramic Capacitor (0402)
10µF±10%; 10V; X7R; Ceramic Capacitor (0603)
3-pin Header (2.54mm)
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
C118
C120, C220
C121, C218, C221
C217
J101, J201
L101
68μH±10%; IRMS=0.8A; Inductor (5mm x 5mm)
22μH±10%; IRMS=1.7A; Inductor (4.1mm x 4.1mm)
3.32MΩ, ±1%, 1/10W, Resistor (0603)
WURTH 74404054680
L201
WURTH 74438356220
R101, R201
R102, R202
R103
294kΩ, ±1%, 1/10W, Resistor (0603)
412kΩ, ±1%, 1/16W, Resistor (0402)
R104
26.1kΩ, ±1%, 1/16W, Resistor (0402)
R105, R205
R106, R206
R107, R207
R203
10.5kΩ, ±1%, 1/16W, Resistor (0402)
10kΩ, ±1%, 1/16W, Resistor (0402)
0Ω, ±1%, 1/2W, Resistor (0805)
154kΩ, ±1%, 1/16W, Resistor (0402)
R204
34kΩ, ±1%, 1/16W, Resistor (0402)
High-Efficiency, Synchronous, Inverting Output DC-DC
Converter (12 TDFN 3mm x 3mm)
High-Efficiency, Synchronous, Inverting Output DC-DC
Converter (12 TDFN 3mm x 3mm)
26
27
1
1
U101
U201
MAXIM INTEGRATED MAX17579ATC+
MAXIM INTEGRATED MAX17580ATC+
28
29
30
31
32
33
34
35
36
37
2
1
1
0
0
0
0
0
0
0
SU101, SU201
C205
Jumper Socket (2.54mm)
Optional: 1µF±10%; 100V; X7R; Ceramic Capacitor (1206)
Optional: 22μH±10%; IRMS=390mA; Inductor (2mm x 1.9mm)
Open: Capacitor (0402)
SULLINS STC02SYAN
TDK C3216X7R2A105K160AA
COILCRAFT XPL2010-223ML
L202
C103, C109, C203, C209
C104, C122, C204, C222
C105
Open: Capacitor (0603)
Open: Capacitor (1206)
C106, C107, C206, C207
D101, D201
Open: Capacitor (1210)
Open: Diode (POWERDI-323)
L102
Open: Inductor (3.2mm x 3.5mm)
Open: Resistor (0603)
R108, R208
DEFAULT JUMPER TABLE
JUMPER
J101
SHUNT POSITION
Open
Open
J201
Maxim Integrated
│ 8
www.maximintegrated.com
MAX17579EVKIT#, MAX17580EVKIT#
Evaluation Kits
Evaluate: MAX17579 and MAX17580
in -15V and -5V Output-Voltage
Applications
MAX17579EVKIT# and MAX17580EVKIT# EV Kit Schematics
MAX17579EVKIT# Schematic Diagram
1 3
1
3
+
1
2
Maxim Integrated
│ 9
www.maximintegrated.com
MAX17579EVKIT#, MAX17580EVKIT#
Evaluation Kits
Evaluate: MAX17579 and MAX17580
in -15V and -5V Output-Voltage
Applications
MAX17579EVKIT# and MAX17580EVKIT# EV Kit Schematics (continued)
MAX17580EVKIT# Schematic Diagram
1 3
1
3
+
1
2
Maxim Integrated
│ 10
www.maximintegrated.com
MAX17579EVKIT#, MAX17580EVKIT#
Evaluation Kits
Evaluate: MAX17579 and MAX17580
in -15V and -5V Output-Voltage
Applications
MAX17579EVKIT# and MAX17580EVKIT# EV Kits PCB Layouts
ꢀꢁ
MAX17579EVKIT# and MAX17580EVKIT# EV Kits Component Placement Guide—Top Silkscreen
ꢀꢁ
MAX17579EVKIT# and MAX17580EVKIT# EV Kits PCB Layout—Top Layer
Maxim Integrated
│ 11
www.maximintegrated.com
MAX17579EVKIT#, MAX17580EVKIT#
Evaluation Kits
Evaluate: MAX17579 and MAX17580
in -15V and -5V Output-Voltage
Applications
MAX17579EVKIT# and MAX17580EVKIT# EV Kits PCB Layouts (continued)
ꢀꢁ
MAX17579EVKIT# and MAX17580EVKIT# EV Kits PCB Layout—Layer 2
ꢀꢁ
MAX17579EVKIT# and MAX17580EVKIT# EV Kits PCB Layout—Layer 3
Maxim Integrated
│ 12
www.maximintegrated.com
MAX17579EVKIT#, MAX17580EVKIT#
Evaluation Kits
Evaluate: MAX17579 and MAX17580
in -15V and -5V Output-Voltage
Applications
MAX17579EVKIT# and MAX17580EVKIT# EV Kits PCB Layouts (continued)
ꢀꢁ
MAX17579EVKIT# and MAX17580EVKIT# EV Kits PCB Layout—Bottom Layer
ꢀꢁ
MAX17579EVKIT# and MAX17580EVKIT# EV Kits Component Placement Guide—Bottom Silkscreen
Maxim Integrated
│ 13
www.maximintegrated.com
MAX17579EVKIT#, MAX17580EVKIT#
Evaluation Kits
Evaluate: MAX17579 and MAX17580
in -15V and -5V Output-Voltage
Applications
Revision History
REVISION REVISION
PAGES
CHANGED
DESCRIPTION
NUMBER
DATE
0
4/21
Initial release
—
For pricing, delivery, and ordering information, please visit Maxim Integrated’s online storefront at https://www.maximintegrated.com/en/storefront/storefront.html.
Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent licenses
are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time.
©
Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc.
2021 Maxim Integrated Products, Inc.
│ 14
相关型号:
MAX17582GTM+T
Switching Regulator/Controller, Current-mode, 800kHz Switching Freq-Max, BICMOS, PQCC48,
MAXIM
MAX1758EAI+
Power Supply Support Circuit, Fixed, 1 Channel, PDSO28, 5.30 MM, 0.65 MM PITCH, SSOP-28
MAXIM
©2020 ICPDF网 联系我们和版权申明