MAX1288EVKIT [MAXIM]
Evaluation Kit and Evaluation System for the MAX1286/MAX1288/MAX1086/MAX1088 ; 评估套件和评估系统MAX1286 / MAX1288 / MAX1086 / MAX1088\n型号: | MAX1288EVKIT |
厂家: | MAXIM INTEGRATED PRODUCTS |
描述: | Evaluation Kit and Evaluation System for the MAX1286/MAX1288/MAX1086/MAX1088
|
文件: | 总6页 (文件大小:553K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
19-2251; Rev 0; 12/01
MAX1286 Evaluation Kit
and Evaluation System
General Description
Features
o Proven PC Board Layout
The MAX1286 evaluation system (EV system) is a com-
plete 12-bit, 2-channel data-acquisition system, consist-
ing of a MAX1286 evaluation kit (EV kit) and a Maxim
68HC16MODULE-DIP microcontroller (µC) module.
Order the complete EV system (MAX1286EVC16) for a
comprehensive evaluation of the MAX1286 using a per-
sonal computer (PC). Order the EV kit (MAX1286EVKIT)
separately if the 68HC16MODULE-DIP module has
already been purchased with a previous Maxim EV sys-
tem or for custom use in other µC-based systems. The
MAX1286 EV kit can also be used to evaluate the
MAX1288, MAX1086, and MAX1088.
o Windows 95/98® Evaluation Software
o Convenient On-Board Test Points
o Fully Assembled and Tested
Ordering Information
PART
TEMP RANGE
0°C to +70°C
0°C to +70°C
INTERFACE
User Supplied
Windows
MAX1286EVKIT
MAX1286EVC16
Note: The MAX1286 software is designed for use with the
complete EV system. It includes both a µC module and the
EV kit. If the Windows software will not be used, the EV kit
board can be purchased by itself, without the µC module.
Component List
MAX1286EVC16 System
PART
QTY
DESCRIPTION
MAX1286 EV kit
MAX1286EVKIT
1
1
68HC16MODULE-DIP
68HC16 µC module
MAX1286EVKIT
DESIGNATION
QTY
DESCRIPTION
DESIGNATION
QTY
DESCRIPTION
U2
1
MAX6064AEUR-T (SOT23-3)
C1, C4
2
2
0
0.1µF ceramic capacitors (0603)
PC board, “MAX1286
Evaluation Kit”
100pF ceramic capacitors
(0603)
None
None
1
1
C2, C3
C5
Open (0603)
3.5in software disk, “MAX1286
Evaluation Kit”
✕
2
20 right-angle female
J1
1
connector
Samtec SSW-120-02-S-D-RA
MAX1286 EV kit data sheet
(includes 68HC16MODULE-DIP
manual)
None
None
1
1
TP1
U1
1
1
5-pin header
MAX1286 data sheet
MAX1286EKA-T (SOT23-8)
Windows 95/98 is a registered trademark of Microsoft Corp.
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
MAX1286 Evaluation Kit
and Evaluation System
Quick Start
Detailed Description
Recommended Equipment
Before you begin, you will need the following equip-
ment:
MAX1286 Standalone EV Kit
The MAX1286EVKIT provides a proven PC board layout
to evaluate the MAX1286. It must be interfaced to
appropriate timing signals for proper operation.
Connect 5V to VDD and connect ground return to GND.
Refer to Figure 2, MAX1286 EV Kit Schematic, and the
MAX1286 data sheet for timing requirements.
• Maxim MAX1286EVC16 (MAX1286EVKIT board and
68HC16MODULE-DIP)
• A DC power supply (8V - 20V)
• An IBM-compatible PC with Windows 95/98
• A free standard serial port, preferably a 9-pin plug
MAX1286 EV System
The MAX1286EVC16 EV system operates from a user-
supplied 8V to 20V DC power supply. Windows 95/98
software interfaces to the EV system board through the
PC’s standard serial port. See the Quick Start section
for setup and operating instructions.
• A standard serial cable to connect the PCs standard
serial port to the 68HC16MODULE-DIP module
1) Carefully connect the boards by aligning the 40-pin
connector of the MAX1286 EV kit with the 40-pin
header of the 68HC16MODULE-DIP module. Gently
press them together. The two boards should be
flush against one another.
Detailed Description
of Software
The evaluation software’s main window is shown in
Figure 1. It controls the serial clock speed and sample
rate. It also displays the voltage and output code as
well as some statistics of the input signal. A separate
graph shows the data changing in real time. The
update rate is limited to about 10 samples per second,
due to COM port bandwidth limitations.
2) Ensure that the µC module SW1 switch is in the OFF
position.
3) Connect the 8V to 20V power supply to the µC mod-
ule terminal block located next to SW1. Observe the
polarity marked on the board.
4) Connect a standard serial cable from the computer’s
serial port to the µC module. If the PCs standard ser-
ial port has a 9-pin connector, use a straight-
through, 9-pin female-to-male cable. If the PCs only
available standard serial port has a 25-pin connec-
tor, a standard 25-pin to 9-pin adapter will be
required. The EV kit software checks the modem
status lines (CTS, DSR, DCD) to confirm that the cor-
rect port has been selected.
Part Selection
The part selection area allows the user to evaluate other
parts in the MAX1286 family. Use the pulldown menu to
select the MAX1286, MAX1288, MAX1086 or MAX1088.
The default part is the MAX1286.
Channel Selection
The channel selection area allows the user to select
AIN1 only, AIN2 only, or AIN1 and AIN2 by simply
checking the corresponding channel checkbox. The
current voltage and code is also displayed for each
active channel.
5) Install the MAX1286 EV kit software on your comput-
er by running the INSTALL.EXE program on the flop-
py disk. The program files are copied and icons are
created for them in the Windows Start Menu.
6) Start the MAX1286 program by opening its icon in
the Start Menu.
ADC to µC Sample Rate
The SPI™ SCLK frequency area allows the user to mod-
ify the ADC to µC sample rate. Use the pulldown menu
to select the desired SCLK frequency. The first two dig-
its are the divisor for the µCs internal clock. The next
floating point number is the corresponding SCLK fre-
quency. The voltage at the ADCs active channels is
digitized and stored in the µCs memory. The approxi-
mate ADC to µC sample rate is displayed on the right
side of the main window.
7) The Windows program will prompt you to connect
the µC module and turn its power on. Slide SW1 to
the ON position. When you click OK, the Windows
program will automatically download KIT1286.C16 to
the module.
8) Apply an input signal (0V to V
) between AIN1
REF
and GND. Observe the readout on the running
Windows program.
SPI is a trademark of Motorola, Inc.
2
_______________________________________________________________________________________
MAX1286 Evaluation Kit
and Evaluation System
Figure 1. MAX1286 Evaluation Software Main Window
µC to PC Data Rate
Reference Voltage
The evaluation software assumes a 4.096V reference
voltage, unless otherwise specified. To override the
4.096V reference value, cut JU1 and apply the new ref-
erence voltage to the lower connection of JU1. Then
type in the new reference voltage, without the volt unit,
The µC to PC data rate area allows the user to manually
or automatically read the digitized data stored in the
µC. To manually read the digitized data, press the
“Read” button. To configure the software to automati-
cally read, check the Read Every checkbox. The auto-
matic read rate can be changed by selecting the
desired amount of milliseconds in the pulldown menu.
The program waits the selected amount of milliseconds
before reading again. The approximate µC to PC data
rate is displayed on the right side of the main window.
and press the “Set V
” button. The EV kit software
REF
uses the value typed in the V
digital code to a voltage.
field to translate the
REF
Detailed Description
of Hardware
Statistics
The Minimum and Maximum fields in the statistics area
show the highest and lowest readings acquired. The
Average field shows a running mean. When reading
data manually by pressing the Read button, the
Average and RMS fields require approximately five
samples until they are accurately represented. The
Clear Statistics button resets the statistics.
The MAX1286 is a 2-channel, 12-bit serial ADC. When
the MAX1286EVKIT board is connected to the
68HC16MODULE-DIP module, power is provided by
the module. See Figure 2, MAX1286 EV Kit Schematic.
The MAX6064A voltage reference is included on the
MAX1286EVKIT board. It is a 4.096V voltage reference
with a temperature coefficient of 20ppm/°C. If another
voltage reference is desired, cut the JU1 trace to dis-
connect the MAX6064A from the MAX1286.
_______________________________________________________________________________________
3
MAX1286 Evaluation Kit
and Evaluation System
TP1
3
VDD
2
1
4
5
VDD
J1-1
J1-2
J1-3
J1-4
1
2
V
DD
8
7
J1-37
J1-35
J1-38
SCLK
DOUT
C1
0.1µF
U1
AIN1
AIN2
GND
AIN1
AIN2
GND
MAX1286
C2
100pF
6
5
CNVST
REF
3
4
C3
100pF
VDD
C5
OPEN
J1-7
J1-8
JU1
CUTHERE
VDD
C4
0.1µF
1
IN
U2
2
OUT
MAX6064A
GND
3
Figure 2. MAX1286 EV Kit Schematic
Evaluating Other MAX1286
Family Devices
The MAX1286EVKIT board can also be used to evalu-
ate other parts in the MAX1286 family. The parts that
can be evaluated using the MAX1286EVKIT board are:
the MAX1286, MAX1288, MAX1086, or MAX1088. The
first two digits in the part number represent the resolu-
tion of the ADC. For example, the MAX1286 is a 12-bit
ADC and the MAX1086 is a 10-bit ADC. The MAX1286
and MAX1086 are two-channel parts, while the
MAX1288 and MAX1088 have one differential input.
4
_______________________________________________________________________________________
MAX1286 Evaluation Kit
and Evaluation System
1.0"
1.0"
Figure 3. MAX1286 EV Kit Component Placement Guide—
Component Side
Figure 4. MAX1286 EV Kit PC Board Layout—Component Side
_______________________________________________________________________________________
5
MAX1286 Evaluation Kit
and Evaluation System
1.0"
Figure 5. MAX1286 EV Kit PC Board Layout—Solder Side
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
6 _____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2001 Maxim Integrated Products
Printed USA
is a registered trademark of Maxim Integrated Products.
相关型号:
MAX1289
150ksps, 12-Bit, 2-Channel Single-Ended, and 1-Channel True-Differential ADCs in SOT23
MAXIM
MAX1289EKA-T
150ksps, 12-Bit, 2-Channel Single-Ended, and 1-Channel True-Differential ADCs in SOT23
MAXIM
©2020 ICPDF网 联系我们和版权申明