MAX11040DB [MAXIM]
MAX11040 Evaluation Kit/Daughterboard;型号: | MAX11040DB |
厂家: | MAXIM INTEGRATED PRODUCTS |
描述: | MAX11040 Evaluation Kit/Daughterboard |
文件: | 总31页 (文件大小:1632K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
19-4678; Rev 1; 5/10
MAX11040 Evaluation Kit/Daughterboard
Evluate:MAX140
General Description
Features
The MAX11040 evaluation kit (EV kit) is a fully assem-
bled and tested PCB that evaluates the IC’s 4-channel,
simultaneous-sampling ADC. The EV kit also includes
Windows 2000-, Windows XP -, and Windows Vista -
compatible software that provides a simple graphical
user interface (GUI) for exercising the IC’s features.
o Eight Simultaneous ADC Channel Inputs
(EV Kit only)
®
®
®
o Up to 20* Simultaneous ADC Channel Inputs with
the EV Kit and the Daughterboards
o Four Banana Jacks for Power-Supply Inputs
The EV kit comes with two MAX11040GUU+s installed
on the motherboard. Up to three more parts can be
connected to the EV kit to increase the number of input
channels by cascading up to three daughterboards to
the EV kit (order separately).
o BNC Connectors on Channel 0 and Channel 1 for
the EV Kit and Daughterboard for the Signal
Inputs
o Autofrequency, RMS, Min, Max, and Average DC
Calculations in the EV Kit Software
Windows, Windows XP, and Windows Vista are registered
trademarks of Microsoft Corp.
o USB-PC Connection
o Proven PCB Layout
o Windows 2000-, Windows XP, and Windows Vista
(32-Bit)-Compatible Evaluation Software
Ordering Information
o Fully Assembled and Tested
PART
TYPE
EV Kit
MAX11040EVKIT+
MAX11040DBEVKIT+
*The EV kit design limits 20 ADC channel inputs; however, the
IC supports up to 32 ADC channel inputs when designed in a
system using eight ICs.
Daughterboard
+Denotes lead(Pb)-free and RoHS compliant.
Component Lists
MAX11040 EV Kit
DESIGNATION
QTY
DESCRIPTION
DESIGNATION
QTY
DESCRIPTION
75Ω, 4-pin BNC female jack
receptacles, 0.250in spacing
(top mount)
0.1µF 10ꢀ, 16V X7R ceramic
capacitors (0603)
TDK C1608X7R1C104K
AIN0-, AIN0+,
AIN1-, AIN1+
C39, C50–C55, C60,
C62, C63
4
10
22µF 10ꢀ, 6.3V X5R ceramic
capacitor (0805)
TDK C2012X5R0J226K
AVDD, AGND,
DVDD, DGND
4
Uninsulated banana jacks
C41
C42
1
1
0
C1, C2, C4, C5, C10,
C11, C13, C14, C22,
C23, C25, C26, C30,
C31, C33, C34,
4.7µF 10ꢀ, 6.3V X5R ceramic
capacitor (0603)
TDK C1608X5R0J475M
10pF 5ꢀ, 50V C0G ceramic
capacitors (0603)
TDK C1608C0G1H100J
18
C46, C47
C43, C44, C45, C57,
C58, C61, C107,
C108, C111–C126
Not installed, ceramic
capacitors (0603)
C3, C6, C7, C8, C12,
C15, C16, C18, C20,
C24, C27, C28, C32,
C35, C36, C37, C40
1µF 10ꢀ, 10V X7R ceramic
17 capacitors (0603)
TDK C1608X7R1A105K
10µF 10ꢀ, 4V X5R ceramic
capacitor (0603)
TDK C1608X5R0G106K
C49
C79
1
1
C9, C17, C19, C21,
C29, C38, C48, C59,
C64–C78, C80–C99,
C101–C104
0.01µF 10ꢀ, 50V C0G
47 ceramic capacitors (0603)
TDK C1608C0G1E103K
22µF 20ꢀ, 6.3V X7R ceramic
capacitor (1206)
TDK C3216X7R0J226M
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
MAX11040 Evaluation Kit/Daughterboard
Component Lists (continued)
MAX11040 EV Kit
DESIGNATION
QTY
DESCRIPTION
DESIGNATION
QTY
DESCRIPTION
R56
1
100kΩ 5ꢀ resistor (0603)
10µF 10ꢀ, 6.3V X5R ceramic
capacitor (1206)
TDK C3216X5R0J106K
C100
1
33Ω, 8-pin/4-resistor SMT resistor
networks
Panasonic EXB-28V330JX
RN1–RN5
RN6
5
1
5
1
1
18pF 5ꢀ, 50V C0G ceramic
capacitors (0603)
TDK C1608C0G1H180J
10kΩ, 16-pin/8-resistor SMT
resistor network
Panasonic EXB-2HV103JV
C105, C106
2
D1, D3
D2, D4
2
2
Yellow LEDs (0603)
Red LEDs (0603)
33Ω, 16-pin/8-resistor SMT resistor
networks
Panasonic EXB-2HV330JV
RN7–RN11
RN12
6.2V, 500mW zener MELF diode
Diodes, Inc. ZMM5234B-7
D9
1
2.2kΩ, 16-pin/8-resistor SMT
resistor network
Panasonic EXB-2HV222JV
USB type-B right-angle PC-
mount receptacle
J1
J2
1
1
8
1kΩ, 8-pin/4-resistor SMT resistor
network
Panasonic EXB-28V102JX
Dual-row, 14-pin header (2 x 7)
RN13
Evluate:MAX140
4-position terminal blocks
ED100/4DS
J3–J10
4-position, SMT half-pitch DIP
switch
S1
S2
1
1
2
1
1
Dual-row, right-angle male
header (2 x 7)
J12
1
2
8
Pushbutton switch
J13, J14
Dual-row, 20-pin headers (2 x 10)
4-channel ADC (38 TSSOP)
Maxim MAX11040GUU+
U1, U2
U3
JU1, JU2, JU6,
JU15–JU19
2-pin headers
D-flip flop
JU3, JU20
L1, L2
2
2
3-pin headers
LDO regulator (8 TDFN)
Maxim MAX1976AETA160+
30Ω SMT ferrite beads (0603)
U7
220Ω SMT ferrite beads (0805)
Murata BLM21PG221SN1D
L3–L6
4
0
U8
U9
1
1
Controller
256kword flash memory (48 TSOP)
R1, R2, R4–R8, R28,
R30, R49
Not installed, resistors (0603)
64Mb SDRAM (54 TSOP)
Micron Technology
MT48LC4M16A2P-75
U10
1
R3, R10, R11, R12
R9
4
1
330Ω 5ꢀ resistors (0603)
0Ω 5ꢀ resistor (0603)
U12, U13
U14
2
0
1
1
2-input positive-OR gates (SOT32)
Not installed (8 SO)
R26, R27, R36, R37,
R38
5
6
10kΩ 5ꢀ resistors (0603)
33Ω 5ꢀ resistors (0603)
Y1
24.576MHz crystal, 18pF load
12MHz SMT crystal (6mm)
R29, R31, R32, R33,
R50, R51
Y2
32.768kHz watch crystal, 12.5pF
cylindrical
Y3
1
R34
R41, R42
R43, R54, R55
R44
1
2
3
1
10Ω 5ꢀ resistor (0603)
27Ω 5ꢀ resistors (0603)
1.5kΩ 1ꢀ resistors (0603)
300kΩ 5ꢀ resistor (0603)
Y4
—
0
9
Not installed, 24.576MHz crystal
Shunts
USB high-speed A-to-B cables,
5ft (1.5m)
—
—
1
1
PCB: MAX11040 EVALUATION KIT+
2
_______________________________________________________________________________________
MAX11040 Evaluation Kit/Daughterboard
Evluate:MAX140
Component Lists (continued)
MAX11040 Daughterboard
DESIGNATION
QTY
DESCRIPTION
DESIGNATION
QTY
DESCRIPTION
J3
1
4
Dual-row, 20-pin header (2 x 10)
4-position terminal blocks
75Ω, 4-pin BNC female jack
receptacles, 0.250in spacing
(top mount)
AIN0-, AIN0+,
AIN1-, AIN1+
4
J4–J7
JU1, JU2, JU5,
JU6, JU7
5
3
4
2-pin headers
AVDD, AGND,
DVDD, DGND
4
8
Uninsulated banana jacks
JU3, JU4, JU11
3-pin headers
10pF 5ꢀ, 50V C0G ceramic
capacitors (0603)
TDK C1608C0G1H100J
330Ω 5ꢀ resistors (0603)
(use lead-free parts only)
C1, C2, C4, C5, C10,
C11, C13, C14
R1–R4
2.2kΩ 5ꢀ resistor (0603)
(use lead-free parts only)
1µF 10ꢀ, 10V X7R ceramic
capacitors (0603)
TDK C1608X7R1A105K
R5
R6, R8
R7
1
0
1
1
1
C3, C6, C7, C8, C12,
C15, C16, C18
8
3
2
Not installed, resistors (0603)
0Ω 5ꢀ resistor (0603)
(use lead-free parts only)
0.01µF 10ꢀ, 25V X7R
ceramic capacitors (0603)
Murata GRM188R71E103K
C9, C17, C19
C20, C21
S1
Pushbutton switch
18pF 5ꢀ, 50V C0G ceramic
capacitors (0603)
TDK C1608C0G1H180J
4-channel ADC (38 TSSOP)
Maxim MAX11040GUU+
U1
U2
Y1
—
1
1
8
D-flip flop
C22–C29
D1, D3
0
2
2
Not installed, capacitors (0603)
Yellow LEDs (0603)
24.576MHz crystal, 18pF load
Shunts (JU1–JU5)
D2, D4
Red LEDs (0603)
PCB: MAX11040DB
EVALUATION KIT+
—
1
Dual-row, 14-pin right-angle
female connector (2 x 7)
J1
J2
1
1
Dual-row, 14-pin right-angle
male connector (2 x 7)
MAX11040 EV Kit Files
Component Suppliers
SUPPLIER
PHONE
WEBSITE
FILE
DESCRIPTION
Installs the EV kit files on your computer
Application program
Diodes, Inc.
805-446-4800 www.diodes.com
INSTALL.EXE
MAX11040.EXE
LIBUSB.INF
UNINST.INI
Murata Electronics
North America, Inc.
770-436-1300 www.murata-northamerica.com
USB device driver file
Panasonic Corp. 800-344-2112 www.panasonic.com
TDK Corp. 847-803-6100 www.component.tdk.com
Uninstalls the EV kit software
Note: Indicate that you are using the MAX11040 when
contacting these component suppliers.
_______________________________________________________________________________________
3
MAX11040 Evaluation Kit/Daughterboard
8) Install the MAX11040 evaluation software on your
Quick Start
Recommended Equipment
• MAX11040 EV kit (USB cable included)
computer by running the INSTALL.EXE program
inside the temporary folder. The program files are
copied and icons are created for them in the
Windows Start | Programs menu.
• +3.3V analog supply voltage
• +3.3V digital supply voltage
• Signal source from -2.2V to +2.2V
9) Connect the USB cable from the PC to the EV kit. A
Building Driver Database window pops up in addi-
tion to a New Hardware Found message when
installing the USB driver for the first time. If a win-
dow that is similar to the one described above is not
seen after 30s, remove the USB cable from the EV
kit and reconnect it. Administrator privileges are
required to install the USB device driver on
Windows.
• User-supplied Windows 2000/XP or Windows Vista
PC with a spare USB port
Note: In the following sections, software-related items
are identified by bolding. Text in bold refers to items
directly from the EV kit software. Text in bold and
underlined refers to items from the Windows operating
system.
10) Follow the directions of the Add New Hardware
Wizard to install the USB device driver. Choose the
Search for the best driver for your device option.
Specify the location of the device driver to be
C:\Program Files\MAX11040 using the Browse
button. During device driver installation, Windows
may show a warning message indicating that the
device driver Maxim uses does not contain a digital
signature. This is not an error condition and it is
safe to proceed with installation. Refer to the
USB_Driver_Help.PDF document included with the
software for additional information.
Procedure
The EV kit is fully assembled and tested. Follow the
steps below to verify board operation. Caution: Do not
turn on power supplies until all connections are
completed.
Evluate:MAX140
1) Visit www.maxim-ic.com/evkitsoftware to down-
load the latest version of the EV kit software,
11040Rxx.ZIP. Save the EV kit software to a tempo-
rary folder and uncompress the ZIP file.
2) Make sure that the shunts of all jumpers are in the
default positions, as shown in Table 1.
11) Start the EV kit software by opening its icon in the
Start | Programs menu.
3) Connect the analog voltage supply to the AVDD
and AGND connectors.
12) Wait until the program automatically detects the
MAX11040 hardware and displays the user-inter-
face panel (Figure 1).
4) Connect the digital voltage supply to the DVDD and
DGND connectors.
13) Press the Start Conversion button in the Data
Logging group box.
5) Turn on the power supply.
6) Connect the negative terminal or ground terminal of
the signal source to the negative input (‘-’) on J3
(AIN0 on U1), and the positive terminal of the signal
source to the positive input (‘+’) on J3.
14) Press the Calculate button and verify that the
Frequency of 60Hz, the MIN value of -1V, and the
MAX value of 1V are displayed in the Calculation
group box.
7) Set the signal source to generate a 60Hz, 2V peak-
to-peak sinusoidal wave.
4
_______________________________________________________________________________________
MAX11040 Evaluation Kit/Daughterboard
Evluate:MAX140
Table 1. Jumper Settings (MAX11040 EV Kit)
SHUNT
JUMPER
DESCRIPTION
WHEN TO USE THIS OPTION
POSITION
Connects the on-board crystal (Y1) to the crystal- When the user wishes to stimulate IC #1 modulator
oscillator input and output of IC #1 (U1)
1-2*
clock by the on-board crystal (Y1)
JU1
Disconnects the on-board crystal from the IC
(U1)
When the user wishes to stimulate IC #1
modulator clock by an external frequency
Open
When the user-supplied external crystal
connects to the IC (U1) through the EX_XIN and
the EX_XOUT pads (see also JU6)
Connects the XOUT pin of the IC (U1) to the
EX_XOUT pad
1-2
Open*
1-2
JU2
JU3
Disconnects the EX_XOUT pad from the XOUT
pin of the IC (U1)
When the user wishes to stimulate the IC (U1)
modulator clock by the Y1 crystal
Connects the DRDYOUT pin of the IC (U2) to the
CO_DRDYOUT pin on the cascading connector
(J12)
Use this option when the IC daughterboard is
connected to the IC EV kit
Connects the DRDYOUT pin of the IC (U2) to the When there is no daughterboard connected to
2-3*
1-2
interrupt pin (INT0) of the on-board controller
the board
Connects the XIN pin of the IC (U1) to the
EX_XIN pad
When the user wishes to stimulate the IC (U1)
modulator clock by an external clock or crystal,
Note: User-supplied external crystal may be
connected to the IC (U1) through the EX_XIN and not the Y1 crystal (see also JU2)
the EX_XOUT pads
JU6
Disconnects the EX_XIN pad from the XIN pin of
the IC (U1)
When the user wishes to stimulate the IC (U1)
modulator clock by the Y1 crystal
Open*
1-2
Connects the AIN0- pin of the IC (U1) to AGND for When the user wishes to make a single-ended
single-ended input-signal measurement
signal measurement on AIN0+/AIN0-
JU15
JU16
JU17
Disconnects the AIN0- pin of the IC (U1) from
AGND
When the user wishes to make a differential
signal measurement on AIN0+/AIN0-
Open*
1-2
Connects the AIN1- pin of the IC (U1) to AGND for When the user wishes to make a single-ended
single-ended input-signal measurement
signal measurement on AIN1+/AIN1-
Disconnects the AIN1- pin of the IC (U1) from
AGND
When the user wishes to make a differential
signal measurement on AIN1+/AIN1-
Open*
1-2
Connects the DRDYOUT pin of the IC (U2) to the When the user wishes to have the SYNC pin
SYNC signal (GP5) of the controller
driven by the DRDYOUT
Disconnects the DRDYOUT pin of the IC (U2)
from the SYNC signal (GP5) of the controller
When the user wishes to have the SYNC pin
driven by the controller
Open*
Connects the user-supplied crystal (Y4) to the
crystal-oscillator input and output of the IC (U2)
Note: Y4 is not loaded by default, but can be
loaded by the user
When the user wishes to clock the IC (U2) by the
Y4 crystal (must be loaded by the user)
1-2
JU18
Disconnects the user-supplied crystal (Y4) from
the IC (U2)
When the user does not wish to stimulate the IC
(U2) modulator clock by the Y4 crystal
Open*
_______________________________________________________________________________________
5
MAX11040 Evaluation Kit/Daughterboard
Table 1. Jumper Settings (MAX11040 EV Kit) (continued)
SHUNT
JUMPER
DESCRIPTION
WHEN TO USE THIS OPTION
POSITION
Connects the CLKOUT of the IC (U1) to the XIN
pin of the MAX11040 (U2)
1-2*
When the user wishes to cascade U2 with U1
JU19
Disconnects the CLKOUT of the IC (U1) from the
XIN pin of the MAX11040 (U2)**
Open
When the user does not wish to cascade U2 with U1
*Default position.
**Note: Y4 is not loaded by default, but can be loaded by the user.
Evluate:MAX140
Figure 1. MAX11040 Evaluation Kit Main Window
6
_______________________________________________________________________________________
MAX11040 Evaluation Kit/Daughterboard
Evluate:MAX140
group box. Select the coarse-adjusted output-data rate
Detailed Description of Software
in the Coarse Adjust drop-down list, and adjust the
Fine Adjust scrollbar to set up the output data rate.
The Coarse Adjust drop-down list and the Fine Adjust
scrollbar correspond to the output data rate coarse
adjust register and the output data rate fine adjust reg-
ister, respectively. The actual data rate is displayed in
the Actual Data Rate label.
The MAX11040 EV kit’s main window is shown in Figure
1. The Setup group box, located at the top of the win-
dow, contains Configuration, Sampling Instant
Control, and Output Data Rate Control group boxes.
Functions related to reading single-sample ADC values
in the ADC Conversion group box are located in the
middle section. Data-logging functions and data calcu-
lation are in the Data Logging group box, located at
the bottom of the main window.
To set the sample rate by entering a desired sample
rate, and letting the EV kit software calculate the clos-
est possible sample rate, use the Request Data Rate
edit box. Enter the desired data rate into the Request
Data Rate edit box and press the enter key. The pro-
gram sets up the closest possible data rate automati-
cally. The actual data rate is displayed in the Actual
Data Rate label.
Up to five devices can be cascaded by using the
daughterboards. Select the number of cascaded ICs
from the Number of Devices menu item.
Setup
All the settings in the Setup group box correspond to
the registers of the IC specified in the IC Selection
drop-down list. In the IC Selection drop-down list,
MAX11040 IC #1 and MAX11040 IC #2 represent the
ICs (U1 and U2) on the EV kit. MAX11040 IC #3,
MAX11040 IC #4, and MAX11040 IC #5 represent the
ICs on the optionally cascaded daughterboards.
To set the sample rate by letting the software detect the
input frequency, and adjust the sample rate to a
desired number of samples per cycle, use the Auto
Adjust Sample Rate group box. The software detects
the frequency of the input signal on any channel select-
ed in the drop-down list. Set up the data rate based on
how many samples per input-signal cycle was request-
ed in the Samples/Cycle edit box. The actual data rate
is displayed in the Actual Data Rate label.
When the EV kit software starts up, or when a different
IC is selected in the IC Selection drop-down list, the
Configuration, Sampling Instant Control, and Output
Data Rate Control group boxes display the content of
the IC specified in the IC Selection drop-down list.
ADC Conversion
The ADC Value Display group box, shown in the ADC
Conversion group box, displays the output data codes
and the calculated voltage values for a single sample
of all of the channels on the IC specified in the IC
Selection drop-down list. Pressing the Convert button
in the ADC Conversion group box updates the status
of the ADC Value Display group box.
Configuration
In the Configuration group box, the user can change
the value of the configuration register in the selected IC.
Each checkbox in the Configuration group box corre-
sponds to a bit in the configuration register. Click on
the checkbox to toggle each bit.
Check the Auto Convert checkbox to automatically
and repeatedly read the current ADC value at a rate set
by the Time Interval drop-down list.
Sampling Instant Control
Adjust the appropriate scrollbars in the Sampling
Instant Control group box to set the sampling instant
delay for the input channels.
Data Logging
Start Conversion
The Data Logging group box is located at the bottom
of the window. The user can select the desired number
of conversions in the Number of Samples drop-down
list. Press the Start Conversion button in the Data
Logging group box to start sampling at the rate that
was set by the Output Data Rate Control group box.
Output Data Rate Control
There are three panels in the Output Data Rate
Control group box, and each one of them has a differ-
ent way to set up the data rate of the IC. The user can
select one of them by checking the corresponding
radio button on the left of the panel.
To set the sample rate by directly controlling the ADC’s
register (coarse adjust and fine adjust), use the first
panel at the top of the Output Data Rate Control
Output File Data
The Save to File button is not active until the sampling
is done. After sampling is finished, and before pressing
_______________________________________________________________________________________
7
MAX11040 Evaluation Kit/Daughterboard
the Save to File button, the user needs to select in the
Detailed Description of Hardware
Output File Data group box which channels will have
their sampled data saved into the file. The software
keeps a record of channel selections for each IC.
Select the IC you wish to select in the IC Selection
drop-down list, to display and allow modification of
channel selection for that IC. Press the Select All
Channels on All ICs button to check all the checkbox-
es in the Output File Data group box for all ICs. Press
the Deselect All Channels on All ICs button to clear
all the checkboxes in the Output File Data group box.
Press the Save to File button to save the data from the
selected channels into a file.
MAX11040 EV Kit
The MAX11040 EV kit board provides a proven layout
for evaluating the IC’s four-channel, simultaneous-sam-
pling ADC. The EV kit comes with two
MAX11040GUU+s installed. Eight terminal blocks are
provided on the EV kit for all AIN inputs of the on-board
ICs. Four BNC connectors are also available for the
AIN0 and AIN1 inputs of IC #1 (U1).
Up to three additional parts can be connected to the
EV kit to increase the number of input channels, by
cascading the daughterboards to the EV kit.
See the Daughterboard section for more information.
Zero-Crossing Alignment Option
In the Option group box, when the Align to Zero
Crossing Point checkbox is checked, the program
detects the rising zero-crossing point in the sampled
data of the channel specified in the IC Selection and
Channel Selection drop-down lists. When the Save to
File button is pressed, the program saves the sampled
data starting from the rising zero-crossing point.
Power Supply
Two separate power supplies are required to power up
the EV kit. Connect the analog voltage supply (from
+3V to +3.6V) to the AVDD connector, and the analog
ground to the AGND connector. Connect the digital
voltage supply (from +2.7V to AVDD) to the DVDD con-
nector, and the digital ground to the DGND connector
on the EV kit.
Evluate:MAX140
Calculation
After sampling is finished, press the Calculate button
to calculate the Frequency, RMS, MIN, MAX, and Avg
DC of the input signal of the channel specified in the IC
Selection and Channel Selection drop-down lists. The
calculation for Frequency uses a simple algorithm that
has limitations. The Frequency is calculated by mea-
suring the time between two rising zero-crossing
points. An error may show up in circumstances where
DC offset is on the order of the input-signal amplitude,
or if there is significant noise or other frequency content
in the signal that creates multiple zero crossings near
the fundamental crossing. To calculate these results for
a different channel, change the IC Selection and
Channel Selection drop-down list, and press the
Calculate button.
LEDs
There are four LED indicators (D1–D4) on the EV kit. D1
and D2 LEDs reflect the real-time logic levels on the
FAULT and OVRFLW pins, respectively. D3 and D4
LEDs latch on the fault conditions on the FAULT and
OVRFLW pins, respectively. When D3 or D4 is turned on,
press the Clear LED button in the EV kit software or
press the on-board pushbutton (S2) to turn off the LEDs
after the faults are cleared. All IC FAULT and OVERFLW
pins are open drain and respectively connected in a
wire-ORed configuration.
Daughterboard
The daughterboard comes with one MAX11040GUU+
installed. The user can cascade the daughterboard to
the EV kit to increase the number of input channels.
The software supports up to three daughterboards cas-
cading to the EV kit.
Clear LED
When any of the LEDs on the EV kit and the daughter-
board are on, press the Clear LED button to turn off the
LEDs after the overflow and the overvoltage faults are
cleared.
Four terminal blocks are provided on the daughterboard
for all AIN inputs of the on-board ICs. Four BNC connec-
tors are also available for the AIN0 and AIN1 inputs of
the IC (U1).
Sync Pulse
Press the Sync Pulse button to synchronize the output
data timing for all cascaded devices.
8
_______________________________________________________________________________________
MAX11040 Evaluation Kit/Daughterboard
Evluate:MAX140
Cascade
Carefully connect the boards by aligning the EV kit’s
14-pin connector (J12) with the 14-pin header (J1) of
the daughterboard. Gently press them together. The
two boards should be flush against each other. If more
daughterboards need to be cascaded to the EV kit,
connect the 14-pin connector (J2) of the last daughter-
board with the 14-pin header (J1) of the additional
daughterboard.
AVDD and AGND connectors, respectively. Connect
the digital voltage supply (from +2.7V to AVDD) and the
digital ground to the DVDD and DGND connectors on
the daughterboard, respectively.
LEDs
There are four LED indicators (D1–D4) on the daughter-
board. D1 and D2 LEDs reflect the real-time logic levels
on the FAULT and the OVRFLW pins, respectively. D3
and D4 LEDs latch on the fault conditions on the FAULT
and the OVRFLW pins, respectively. When D3 or D4 is
turned on, press the Clear LED button in the EV kit soft-
ware (Figure 1) or press the on-board pushbutton (S2)
to turn off the LEDs after the faults are cleared. All IC
FAULT and OVERFLW pins are open drain and respec-
tively connected in a wired-ORed configuration.
Place the shunt on pins 2-3 of JU3 on the last daughter-
board (the one farthest away from the EV kit board),
and place the shunt on pins 1-2 of JU3 on all other
boards (including the EV kit board).
Power Supply
Two separate power supplies are required to power up
the daughterboard. Connect the analog voltage supply
(from +3V to +3.6V) and the analog ground to the
Table 2. Jumper Settings (Daughterboard)
SHUNT
JUMPER
DESCRIPTION
WHEN TO USE THIS OPTION
POSITION
Connects the on-board crystal (Y1) to the crystal When the user wishes to stimulate the IC
1-2
oscillator input and output of the IC (U1)
modulator clock by the on-board crystal (Y1)
JU1
When the user does not wish to stimulate the IC
(U1) modulator clock by the on-board crystal
(Y1)
Disconnects the on-board crystal from the IC
(U1)
Open*
1-2
When the user-supplied external crystal
connects to the IC (U1) through the EX_XIN and
the EX_XOUT pads
Connects the XOUT pin of the IC (U1) to the
EX_XOUT pad
JU2
JU3
Disconnects the EX_XOUT pad from the XOUT
pin of the IC (U1)
Open*
1-2
When an external crystal is not used
Connects the DRD YO U T pin of the IC (U1) to the
CO_DRDYOUT pin on the connector (J2)
Use this option when more IC daughterboards
need to be cascaded
Connects the DRDYOUT pin of the IC (U1) to the Use this option on the last IC daughterboard that
2-3*
interrupt pin (INT0) of the on-board controller
cascades to the IC EV kit
Connects the XIN pin of the IC (U1) to the CI_XIN
pin on the J1 connector
When the user wishes to stimulate the IC (U1)
modulator clock by the CLKOUT of the previous
cascaded board
1-2*
2-3
Note: CI_XIN carries the CLKOUT signal from the
previous cascaded board
JU4
Connects the XIN pin of the IC (U1) to the
EX_XIN pad
When the user does not wish to stimulate the IC
(U1) modulator clock by the CLKOUT of the
Note: User-supplied external crystal may be
connected to the IC (U1) through the EX_XIN and previous cascaded board
the EX_XOUT pads
_______________________________________________________________________________________
9
MAX11040 Evaluation Kit/Daughterboard
Table 2. Jumper Settings (Daughterboard) (continued)
SHUNT
JUMPER
DESCRIPTION
WHEN TO USE THIS OPTION
POSITION
Connects the AIN0- pin of the IC (U1) to the
AGND pin for single-ended input signal
measurement
When the user wishes to make a single-ended
signal measurement on AIN0+/AIN0-
1-2
JU5
Disconnects the AIN0- pin of the IC (U1) from the When the user wishes to make a differential
Open*
1-2
AGND pin
signal measurement on AIN0+/AIN0-
Connects the AIN1- pin of the IC (U1) to the
AGND pin for single-ended input signal
measurement
When the user wishes to make a single-ended
signal measurement on AIN1+/AIN1-
JU6
JU7
Disconnects the AIN1- pin of the IC (U1) from the When the user wishes to make a differential
AGND signal measurement on AIN1+/AIN1-
Open*
1-2
Connects the DRDYOUT pin of the IC (U1) to the When the user wishes to have the SYNC pin
SYNC signal (GP5) of the controller driven by DRDYOUT
Disconnects the D RD YO UT pin of the IC (U1) from When the user wishes to have the SYNC pin
Open*
Evluate:MAX140
the SY N C signal (GP5) of the controller
driven by the controller
Connects the CLKOUT pin of the IC (U1) to the
CO_CLKOUT on the J2 connector
When the user wishes to carry the CLKOUT of U1
to the next cascaded board
1-2
Note: CO_CLKOUT carries the CLKOUT signal
to the next cascaded daughterboard
JU11
Connects the CI_XIN pin on the J1 connector to
the CO_CLKOUT pin on the J2 connector
Note: CI_XIN carries the CLKOUT signal from the
previous cascaded board
When the user wishes to carry the frequency
from the previous cascaded board to the next
cascaded board
2-3*
*Default position.
10 ______________________________________________________________________________________
MAX11040 Evaluation Kit/Daughterboard
Evluate:MAX140
Figure 2a. MAX11040 EV Kit Schematic (Sheet 1 of 4)
______________________________________________________________________________________ 11
MAX11040 Evaluation Kit/Daughterboard
Evluate:MAX140
Figure 2b. MAX11040 EV Kit Schematic (Sheet 2 of 4)
12 ______________________________________________________________________________________
MAX11040 Evaluation Kit/Daughterboard
Evluate:MAX140
Figure 2c. MAX11040 EV Kit Schematic (Sheet 3 of 4)
______________________________________________________________________________________ 13
MAX11040 Evaluation Kit/Daughterboard
Evluate:MAX140
Figure 2d. MAX11040 EV Kit Schematic (Sheet 4 of 4)
14 ______________________________________________________________________________________
MAX11040 Evaluation Kit/Daughterboard
Evluate:MAX140
Figure 3. MAX11040 EV Kit Component Placement Guide—Top
______________________________________________________________________________________ 15
MAX11040 Evaluation Kit/Daughterboard
Evluate:MAX140
Figure 4. MAX11040 EV Kit PCB Layout—Component Side
16 ______________________________________________________________________________________
MAX11040 Evaluation Kit/Daughterboard
Evluate:MAX140
Figure 5. MAX11040 EV Kit PCB Layout—Layer 2
______________________________________________________________________________________ 17
MAX11040 Evaluation Kit/Daughterboard
Evluate:MAX140
Figure 6. MAX11040 EV Kit PCB Layout—Layer 3
18 ______________________________________________________________________________________
MAX11040 Evaluation Kit/Daughterboard
Evluate:MAX140
Figure 7. MAX11040 EV Kit PCB Layout—Layer 4
______________________________________________________________________________________ 19
MAX11040 Evaluation Kit/Daughterboard
Evluate:MAX140
Figure 8. MAX11040 EV Kit PCB Layout—Layer 5
20 ______________________________________________________________________________________
MAX11040 Evaluation Kit/Daughterboard
Evluate:MAX140
Figure 9. MAX11040 EV Kit PCB Layout—Bottom Side
______________________________________________________________________________________ 21
MAX11040 Evaluation Kit/Daughterboard
Evluate:MAX140
Figure 10. MAX11040 Component Placement Guide—Bottom
22 ______________________________________________________________________________________
MAX11040 Evaluation Kit/Daughterboard
Evluate:MAX140
Figure 11a. MAX11040 Daughterboard Schematic (Sheet 1 of 2)
______________________________________________________________________________________ 23
MAX11040 Evaluation Kit/Daughterboard
Evluate:MAX140
Figure 11b. MAX11040 Daughterboard Schematic (Sheet 2 of 2)
24 ______________________________________________________________________________________
MAX11040 Evaluation Kit/Daughterboard
Evluate:MAX140
Figure 12. MAX11040 Daughterboard Component Placement Guide—Top
______________________________________________________________________________________ 25
MAX11040 Evaluation Kit/Daughterboard
Evluate:MAX140
Figure 13. MAX11040 Daughterboard PCB Layout—Component Side
26 ______________________________________________________________________________________
MAX11040 Evaluation Kit/Daughterboard
Evluate:MAX140
Figure 14. MAX11040 Daughterboard PCB Layout—Layer 2
______________________________________________________________________________________ 27
MAX11040 Evaluation Kit/Daughterboard
Evluate:MAX140
Figure 15. MAX11040 Daughterboard PCB Layout—Layer 3
28 ______________________________________________________________________________________
MAX11040 Evaluation Kit/Daughterboard
Evluate:MAX140
Figure 16. MAX11040 Daughterboard PCB Layout—Bottom
______________________________________________________________________________________ 29
MAX11040 Evaluation Kit/Daughterboard
Evluate:MAX140
Figure 17. MAX11040 Daughterboard Component Placement Guide—Bottom
30 ______________________________________________________________________________________
MAX11040 Evaluation Kit/Daughterboard
Evluate:MAX140
Revision History
REVISION REVISION
PAGES
CHANGED
DESCRIPTION
NUMBER
DATE
0
1
6/09
Initial release
Changed MAX11040DB+ to MAX11040DBEVKIT+ in Ordering Information
—
1
5/10
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 ____________________ 31
© 2010 Maxim Integrated Products
Maxim is a registered trademark of Maxim Integrated Products, Inc.
相关型号:
MAX11040KGUU+
ADC, Delta-Sigma, 24-Bit, 1 Func, 4 Channel, Serial Access, BICMOS, PDSO38, ROHS COMPLIANT, TSSOP-38
MAXIM
MAX11040K_V01
24-/16-Bit, 4-Channel, Simultaneous-Sampling, 24-/16-Bit, 4-Channel, Simultaneous-Sampling,
MAXIM
©2020 ICPDF网 联系我们和版权申明