DG1206EUI+ [MAXIM]
Low-Leakage, Single 16-Channel and Dual 8-Channel, Analog Multiplexer;型号: | DG1206EUI+ |
厂家: | MAXIM INTEGRATED PRODUCTS |
描述: | Low-Leakage, Single 16-Channel and Dual 8-Channel, Analog Multiplexer |
文件: | 总25页 (文件大小:1729K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
EVALUATION KIT AVAILABLE
Click here to ask about the production status of specific part numbers.
DG1206/DG1207
Low-Leakage, Single 16-Channel and
Dual 8-Channel, Analog Multiplexer
General Description
Benefits and Features
The DG1206 and DG1207 are low-leakage, low-charge-
injection single 16-channel or dual 8-channel multiplexing
switch devices. The DG1206 uses four selection inputs
A3, A2, A1, and A0 to determine the switching logic; the
DG1207 uses three selection inputs A2, A1, and A0. On
both devices, an enable (EN) input is used to enable or
disable the device.
● Distortion-Free Measurement
• 100Ω (typ) On Resistance
• ≤ 2nA (max) On/Off-Leakage Current for DG1206
• ≤ 1nA (max) On/Off-Leakage Current for DG1207
• ≤ 0.5pC (typ) Charge Injection
● Wide Supply Range with Low Supply Current
• 40μA (typ) Quiescent Current at Room
Temperature
The ultra-low capacitance and low-charge injection of the
DG1206/DG1207 make them ideal for automatic test
equipment systems, data acquisition systems, and sam-
ple-and-hold systems where low glitch and fast settling
time are required.
• Fully Specified with ±15V Bipolar Supplies or +12V
Single Supply
• Rail-to-Rail Operation
● Flexible Design Option
The DG1206/DG1207 are available in 5mm x 5mm
32-lead TQFN or 28-lead TSSOP packages. The devices
are specified for operation over the -40°C to +85°C tem-
perature range.
• GPIO-Compatible Control Inputs
• EN Input to Enable/Disable Device
• Available in both 32-TQFN and 28-TSSOP
Packages
• -40ºC to +85°C Temperature Range
Applications
Ordering Information appears at end of data sheet.
● Automatic Test Equipment Systems
● Data Acquisition Systems
● Sample-and-Hold Systems
● Communication Systems
● Audio and Video Routing
19-100804; Rev 0; 6/20
DG1206/DG1207
Low-Leakage, Single 16-Channel and
Dual 8-Channel, Analog Multiplexer
Simplified Block Diagram
V
GND
V
POS
NEG
DG1206
NO1
NO2
NO3
NO4
NO5
NO6
NO7
NO8
NO9
COM
NO10
NO11
NO12
NO13
NO14
NO15
NO16
ADDRESS DECODER / DEVICE ENABLE
EN
A0
A3
A2
A1
19-100804
www.maximintegrated.com
Maxim Integrated | 2
DG1206/DG1207
Low-Leakage, Single 16-Channel and
Dual 8-Channel, Analog Multiplexer
V
GND
V
POS
NEG
DG1207
NO1A
NO2A
NO3A
NO4A
NO5A
NO6A
NO7A
NO8A
NO1B
COMA
NO2B
NO3B
NO4B
NO5B
NO6B
NO7B
NO8B
COMB
ADDRESS DECODER / DEVICE ENABLE
EN
A0
A2
A1
19-100804
www.maximintegrated.com
Maxim Integrated | 3
DG1206/DG1207
Low-Leakage, Single 16-Channel and
Dual 8-Channel, Analog Multiplexer
Absolute Maximum Ratings
V
POS
V
NEG
V
POS
to GND ...................................................... -0.3V to +20.5V
to GND ...................................................... -20.5V to +0.3V
Continuous Power Dissipation (28 TSSOP)
Single-Layer Board (T = +70°C, derate 12.8mW/°C above
A
to V
........................................................ -0.3V to +41V
+70°C)....................................................................1025.60mW
NEG
A_, EN to GND .........................................-0.3V to (V
+ 0.3V)
+ 0.3V)
Multilayer Board (T = +70°C, derate 14mW/°C above
POS
POS
A
NO_, COM_ to GND................... (V
- 0.3V) to (V
+70°C)....................................................................1117.30mW
Operating Temperature Range.............................-40°C to +85°C
Junction Temperature.......................................................+150°C
Storage Temperature Range ..............................-40°C to +150°C
Soldering Temperature (reflow) ........................................+260°C
NEG
Continuous Current Into Any Pin....................................... ±30mA
Continuous Power Dissipation (32 TQFN)
Single-Layer Board (T = +70°C, derate 21.30mW/°C above
A
+70°C).................................................................... 1702.10mW
Multilayer Board (T = +70°C, derate 34.50mW/°C above
A
+70°C).................................................................... 2758.60mW
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the
device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for
extended periods may affect device reliability.
Package Information
32 TQFN
Package Code
T3255+4
21-0140
90-0012
Outline Number
Land Pattern Number
Thermal Resistance, Single-Layer Board:
Junction to Ambient (θ
)
47°C/W
JA
Junction to Case (θ
)
1.70°C/W
JC
Thermal Resistance, Four-Layer Board:
Junction to Ambient (θ
)
29°C/W
JA
Junction to Case (θ
)
1.70°C/W
JC
28 TSSOP
Package Code
Outline Number
U28+2
21-0066
90-0171
Land Pattern Number
Thermal Resistance, Single-Layer Board:
Junction to Ambient (θ
)
78°C/W
13°C/W
JA
Junction to Case (θ
)
JC
Thermal Resistance, Four-Layer Board:
Junction to Ambient (θ
)
71.6°C/W
13°C/W
JA
Junction to Case (θ
)
JC
For the latest package outline information and land patterns (footprints), go to www.maximintegrated.com/packages. Note that a “+”, “#”, or “-” in the package code indicates
RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of RoHS status.
Package thermal resistances were obtained using the method described in JEDEC specification JESD51-7, using a four-layer board. For detailed information on package thermal
considerations, refer to www.maximintegrated.com/thermal-tutorial.
19-100804
www.maximintegrated.com
Maxim Integrated | 4
DG1206/DG1207
Low-Leakage, Single 16-Channel and
Dual 8-Channel, Analog Multiplexer
Electrical Characteristics - ±15V Bipolar Supplies
(V
= +15V, V
= -15V, GND = 0V, T = -40°C to +85°C, unless otherwise noted.) (Note 1)
NEG A
POS
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
POWER SUPPLY
Positive Power-Supply
Voltage
V
V
+5
+20
-5
V
V
POS
Negative Power-Supply
Voltage
-20
NEG
EN = A_ = 0V
40
40
70
80
+1
+1
Positive Power-Supply
Current
I
µA
µA
POS
EN = A_ = 2.4V
EN = A_ = 0V
EN = A_ = 2.4V
-1
-1
Negative Power-Supply
Current
I
NEG
ANALOG SWITCH
Analog-Signal Voltage
Range
V
, V
V
V
POS
V
Ω
Ω
Ω
NO_ COM_
NEG
V
= 0V, ±5V, ±10V, I
= 0V, ±5V, ±10V, I
= 1mA
= 1mA
COM_
COM_
COM_
On-Resistance
R
ON
100
10
160
30
(Note 2)
On-Resistance Match
Between Channels
V
COM_
(Note 2)
ΔR
ON
V
COM_
= -5V, 0V, +5V, I
= 1mA
COM_
On-Resistance Flatness
R
17
25
FLAT
(Note 3)
NO_ Off Capacitance
COM_ Off Capacitance
COM_ On Capacitance
C
V
V
V
= 0.5V , f = 1MHz
4
pF
pF
pF
NO_OFF
NO_
P-P
C
= 0.5V , f = 1MHz
15
10
COM_OFF
COM_
COM_
P-P
C
= 0.5V , f = 1MHz
P-P
COM_ON
NO_ Off Leakage
Current
I
V
= ±10V, V
= ∓10V (Note 4)
-1
-2
-1
+1
+2
+1
nA
NO_OFF
NO_
COM_
DG1206, V
+10/+1V (Note 5)
= +1/+10V, V
=
=
NO_
COM_
COM_
COM_ Off Leakage
Current
I
nA
COM_OFF
DG1207, V
+10/+1V (Note 5)
= +1/+10V, V
NO_
DG1206, V
DG1207, V
= V
= V
= ±10V
-2
-1
+2
+1
COM_ On Leakage
Current
NO_
NO_
COM_
COM_
I
nA
COM_ON
= ±10V
DYNAMIC CHARACTERISTICS
Turn-On Time
Turn-Off Time
t
Figure 1 (V = 10V)
200
300
400
400
ns
ns
ON
S
t
Figure 1 (V = 10V)
S
OFF
Break-Before-Make
Time
t
Figure 2 (V = 10V)
50
ns
ns
BBM
S
Total Transition Time
t
Figure 3 (V = 10V)
400
TT
S
DG1206, Figure 4 (R = R = 50Ω)
150
200
S
L
-3dB Bandwidth
f
MHz
BW
DG1207, Figure 4 (R = R = 50Ω)
S
L
Total Harmonic
Distortion Plus Noise
Figure 5 (f = 20Hz to 20kHz, V
=
S
THD+N
0.1
-80
%
5V
, R = 50Ω, R = 10kΩ)
RMS S L
Figure 6 (R = R = 50Ω, V
= 0.5V
P-
S
L
NO_
Off Isolation
dB
, f = 1MHz)
P
19-100804
www.maximintegrated.com
Maxim Integrated | 5
DG1206/DG1207
Low-Leakage, Single 16-Channel and
Dual 8-Channel, Analog Multiplexer
Electrical Characteristics - ±15V Bipolar Supplies (continued)
(V
= +15V, V
= -15V, GND = 0V, T = -40°C to +85°C, unless otherwise noted.) (Note 1)
NEG A
POS
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
Figure 7 (R = R = 50Ω, V
= 0.5V
P-
S
L
NO_
Crosstalk
-80
dB
, f = 1MHz)
P
DIGITAL INPUTS (A_, EN)
Input-Logic-High
Voltage
V
2.4
-5
V
IH
Input-Logic-Low Voltage
Input-Leakage Current
V
0.8
V
IL
I
+40
µA
IN
Electrical Characteristics - +12V Single Supply
(V
= 12V, V
= GND = 0V, T = -40°C to +85°C, unless otherwise noted.) (Note 1)
NEG A
POS
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
POWER SUPPLY
Positive Power-Supply
Range
V
V
NEG
= GND = 0V
10
12
20
V
POS
EN = A_ = 0V
EN = A_ = 2.4V
70
90
Positive Power-Supply
Current
I
µA
POS
ANALOG SWITCH
Analog-Signal Voltage
Range
V
, V
0
V
V
Ω
Ω
Ω
NO_ COM_
POS
V
6)
= 3V, 6V, 9V, I
= 3V, 6V, 9V, I
= 3V, 6V, 9V, I
= 1mA (Note
= 1mA (Note
= 1mA (Note
COM_
COM_
COM_
COM_
On-Resistance
R
ON
165
18
250
50
On-Resistance Match
Between Channels
V
COM_
6)
ΔR
ON
V
COM_
On-Resistance Flatness
R
15
50
FLAT
6)
NO_ Off Capacitance
COM_ Off Capacitance
COM_ On Capacitance
C
V
V
V
V
= 0.5V , f = 1MHz
4
pF
pF
pF
NO_OFF
NO_
P-P
C
= 0.5V , f = 1MHz
15
10
COM_OFF
COM_
COM_
P-P
C
= 0.5V , f = 1MHz
P-P
COM_ON
NO_ Off Leakage
Current
= +1V/+10V, V
= +10V/+1V
COM_
NO_
I
-1
-2
-1
+1
+2
+1
nA
NO_OFF
(Note 7)
DG1206, V
+10/+1V (Note 7)
= +1/+10V, V
=
=
NO_
COM_
COM_
COM_ Off Leakage
Current
I
nA
COM_OFF
DG1207, V = +1/+10V, V
+10/+1V (Note 7)
NO_
DG1206, V
DG1207, V
= V
= V
= +1V or +10V
= +1V or +10V
-2
-1
+2
+1
COM_ On Leakage
Current
NO_
NO_
COM_
COM_
I
nA
COM_ON
DYNAMIC CHARACTERISTICS
Turn-On Time
Turn-Off Time
t
Figure 1 (V = 10V)
400
250
600
500
ns
ns
ON
S
t
Figure 1 (V = 10V)
S
OFF
Break-Before-Make
Time
t
Figure 2 (V = 10V)
50
ns
BBM
S
19-100804
www.maximintegrated.com
Maxim Integrated | 6
DG1206/DG1207
Low-Leakage, Single 16-Channel and
Dual 8-Channel, Analog Multiplexer
Electrical Characteristics - +12V Single Supply (continued)
(V
= 12V, V
= GND = 0V, T = -40°C to +85°C, unless otherwise noted.) (Note 1)
NEG A
POS
PARAMETER
SYMBOL
CONDITIONS
Figure 3 (V = 10V)
MIN
TYP
MAX
UNITS
Total Transition Time
t
700
ns
TT
S
DG1206, Figure 4 (R = R = 50Ω)
150
200
S
L
-3dB Bandwidth
f
MHz
BW
DG1207, Figure 4 (R = R = 50Ω)
S
L
Total Harmonic
Distortion Plus Noise
Figure 5 (f = 20Hz to 20kHz, V
=
S
NO_
NO_
THD+N
0.1
-80
-80
%
5V
, R = 50Ω, R = 10kΩ)
RMS
S
L
Figure 6 (R = R = 50Ω, V
= 0.5V
= 0.5V
S
L
P-
P-
Off-Isolation
dB
dB
, f = 1MHz)
P
Figure 7 (R = R = 50Ω, V
S
L
Crosstalk
, f = 1MHz)
P
DIGITAL INPUTS (A_, EN)
Input-Logic-High
Voltage
V
2.4
-5
V
IH
Input-Logic-Low Voltage
Input-Leakage Current
V
0.8
V
IL
I
+30
µA
IN
Note 1: Limits are 100% tested at T = +85°C. Limits over the operating temperature range and relevant supply voltage range are
A
guaranteed by design and characterization.
Note 2: On Resistance (R ) and On-Resistance Match Between Channels (ΔR ) are measured when the output channel is turned
ON
ON
on. The output (COM_) is sourced with 1mA current while biased at one of these levels: 0V, ±5V, or ±10V.
Note 3: On-Resistance Flatness (R ) is measured when the output channel is turned on. The output (COM_) is sourced with 1mA
FLAT
current while biased at one of these levels: -5V, 0V, or +5V.
Note 4: NO_ Off-Leakage Current (I ) is measured when the output channel is switched off while the input (NO_) is biased at
NO_OFF
+10V and output (COM_) at -10V, or while the input is biased at -10V and output at +10V.
Note 5: COM_ Off-Leakage Current (I ) is measured when the output channel is switched off while the input (NO_) is biased
COM_OFF
at +1V and output (COM_) at +10V, or while the input is biased at +10V and output at +1V.
Note 6: On Resistance (R ), On-Resistance Match Between Channels (ΔR ), and On-Resistance Flatness (R ) are measured
FLAT
ON
ON
when the output channel is turned on. The output (COM_) is sourced with 1mA current while biased at one of these levels: 3V,
6V, or 9V.
Note 7: NO_ Off-Leakage Current (I
) and COM_ Off-Leakage Current (I
) are measured when the output channel is
COM_OFF
NO_OFF
switched off while the input (NO_) is biased at +1V and output (COM_) at +10V, or while the input is biased at +10V and output
at +1V.
19-100804
www.maximintegrated.com
Maxim Integrated | 7
DG1206/DG1207
Low-Leakage, Single 16-Channel and
Dual 8-Channel, Analog Multiplexer
V
V
POS
NEG
V
V
POS
NEG
3V
ENABLE
50%
50%
NO1
A3
A2
A1
A0
INPUT (V
)
IN
0V
+
-
V
S
t
NO2
t
OFF
ON
DG1206
V
OUT
0V
90%
90%
NO16
COM OUTPUT
EN
V
OUT
COM
50Ω
V
IN
300Ω
35pF
GND
Figure 1. Turn-On Time and Turn-Off Time (Similar Connection for DG1207)
V
V
POS
NEG
V
V
POS
NEG
3V
0V
SELECTION
INPUTS (V
)
NO1
NO16
IN
A3
A2
A1
A0
+
-
V
S
50Ω
V
IN
t
BBM
NO2
DG1206
V
OUT
0V
80%
80%
NO15
COM OUTPUT
EN
V
OUT
COM
+
-
2.4V
300Ω
35pF
GND
Figure 2. Break-Before-Make Time (Similar Connection for DG1207)
19-100804
www.maximintegrated.com
Maxim Integrated | 8
DG1206/DG1207
Low-Leakage, Single 16-Channel and
Dual 8-Channel, Analog Multiplexer
V
V
POS
NEG
V
V
POS
NEG
3V
SELECTION
50%
50%
INPUTS (V
)
NO1
IN
0V
A3
A2
A1
A0
+
-
V
S
50Ω
V
IN
t
t
TT
TT
NO2
DG1206
V
OUT
0V
90%
NO16
COM OUTPUT
10%
EN
V
OUT
COM
+
-
2.4V
300Ω
35pF
GND
Figure 3. Total Transition Time (Similar Connection for DG1207)
V
V
POS
NEG
V
V
POS
NEG
NETWORK
ANALYZER
DG1206
R = 50Ω
S
NO1
V
S
COM
V
OUT
R = 50Ω
L
GND
Figure 4. -3dB Bandwidth (Similar Connection for DG1207)
19-100804
www.maximintegrated.com
Maxim Integrated | 9
DG1206/DG1207
Low-Leakage, Single 16-Channel and
Dual 8-Channel, Analog Multiplexer
V
V
POS
NEG
V
V
POS
NEG
AUDIO
ANALYZER
DG1206
R = 50Ω
S
NO1
V
S
COM
V
OUT
R = 10kΩ
L
GND
Figure 5. Total Harmonic Distortion Plus Noise (Similar Connection for DG1207)
V
V
POS
NEG
V
V
POS
NEG
R = 50Ω
S
NO1
V
NO_
50Ω
COM
V
OUT
DG1206
R = 50Ω
L
GND
NETWORK
ANALYZER
Figure 6. Off-Isolation (Similar Connection for DG1207)
19-100804
www.maximintegrated.com
Maxim Integrated | 10
DG1206/DG1207
Low-Leakage, Single 16-Channel and
Dual 8-Channel, Analog Multiplexer
V
V
POS
NEG
V
V
POS
NEG
R = 50Ω
S
NO1
NO2
COM
V
NO_
V
OUT
50Ω
R = 50Ω
L
DG1206
GND
NETWORK
ANALYZER
Figure 7. Crosstalk (Similar Connection for DG1207)
19-100804
www.maximintegrated.com
Maxim Integrated | 11
DG1206/DG1207
Low-Leakage, Single 16-Channel and
Dual 8-Channel, Analog Multiplexer
Typical Operating Characteristics
(T = 25°C, unless otherwise noted.)
A
19-100804
www.maximintegrated.com
Maxim Integrated | 12
DG1206/DG1207
Low-Leakage, Single 16-Channel and
Dual 8-Channel, Analog Multiplexer
Typical Operating Characteristics (continued)
(T = 25°C, unless otherwise noted.)
A
19-100804
www.maximintegrated.com
Maxim Integrated | 13
DG1206/DG1207
Low-Leakage, Single 16-Channel and
Dual 8-Channel, Analog Multiplexer
Typical Operating Characteristics (continued)
(T = 25°C, unless otherwise noted.)
A
19-100804
www.maximintegrated.com
Maxim Integrated | 14
DG1206/DG1207
Low-Leakage, Single 16-Channel and
Dual 8-Channel, Analog Multiplexer
Typical Operating Characteristics (continued)
(T = 25°C, unless otherwise noted.)
A
19-100804
www.maximintegrated.com
Maxim Integrated | 15
DG1206/DG1207
Low-Leakage, Single 16-Channel and
Dual 8-Channel, Analog Multiplexer
Pin Configurations
DG1206ETJ+
TOP VIEW
24 23 22 21 20 19 18 17
25
26
27
28
29
30
31
32
16
15
14
13
12
11
10
9
EN
A0
A1
NC
V
NEG
NC
NC
NC
DG1206
COM
NC
NC
A2
A3
V
POS
NC
+
GND
1
2
3
4
5
6
7
8
32 TQFN
5mm x 5mm
DG1206EUI+
TOP VIEW
1
+
28
COM
V
POS
NC
NC
2
3
27
26
25
24
23
22
21
20
19
18
17
16
15
V
NEG
NO8
NO7
NO6
NO5
NO4
NO3
NO2
NO1
EN
NO16
NO15
NO14
NO13
4
5
6
DG1206
7
NO12
NO11
NO10
NO9
GND
NC
8
9
10
11
12
13
14
A0
A1
A3
A2
28 TSSOP
19-100804
www.maximintegrated.com
Maxim Integrated | 16
DG1206/DG1207
Low-Leakage, Single 16-Channel and
Dual 8-Channel, Analog Multiplexer
Pin Description
PIN
NAME
FUNCTION
DG1206ETJ+ DG1206EUI+
POWER SUPPLY
Positive Power Supply. Bypass V
capacitor as close to the pin as possible.
to GND with a minimum 0.1μF ceramic
POS
31
1
V
V
POS
Negative Power Suppy. Bypass V to GND with a minimum 0.1μF ceramic
capacitor as close to the pin as possible. In single-supply applications, connect
NEG
25
9
27
NEG
V
NEG
to GND.
12
GND
NC
Logic Ground Reference
12, 13, 26,
27, 28, 30, 32
2, 3, 13
Not Connected
DIGITAL INPUTS
10
11
14
15
14
15
16
17
A3
A2
A1
A0
Logic-Address Input. See the Control Logic section for more information.
Logic-Address Input. See the Control Logic section for more information.
Logic-Address Input. See the Control Logic section for more information.
Logic-Address Input. See the Control Logic section for more information.
Enable Input. Drive EN high to enable the multiplexer. Drive EN low to disable all
switches. Do not leave EN unconnected.
16
18
EN
ANALOG SWITCH
29
28
4
COM
Common Bidirectional Analog-Signal Terminal. It can be either an input or output.
Normally-Open Bidirectional Analog-Signal Terminal. It can be either an input or
output.
1
2
NO16
Normally-Open Bidirectional Analog-Signal Terminal. It can be either an input or
output.
5
6
NO15
NO14
NO13
NO12
NO11
NO10
NO9
Normally-Open Bidirectional Analog-Signal Terminal. It can be either an input or
output.
3
Normally-Open Bidirectional Analog-Signal Terminal. It can be either an input or
output.
4
7
Normally-Open Bidirectional Analog-Signal Terminal. It can be either an input or
output.
5
8
Normally-Open Bidirectional Analog-Signal Terminal. It can be either an input or
output.
6
9
Normally-Open Bidirectional Analog-Signal Terminal. It can be either an input or
output.
7
10
11
26
25
24
23
Normally-Open Bidirectional Analog-Signal Terminal. It can be either an input or
output.
8
Normally-Open Bidirectional Analog-Signal Terminal. It can be either an input or
output.
24
23
22
21
NO8
Normally-Open Bidirectional Analog-Signal Terminal. It can be either an input or
output.
NO7
Normally-Open Bidirectional Analog-Signal Terminal. It can be either an input or
output.
NO6
Normally-Open Bidirectional Analog-Signal Terminal. It can be either an input or
output.
NO5
19-100804
www.maximintegrated.com
Maxim Integrated | 17
DG1206/DG1207
Low-Leakage, Single 16-Channel and
Dual 8-Channel, Analog Multiplexer
Pin Description (continued)
PIN
NAME
FUNCTION
DG1206ETJ+ DG1206EUI+
Normally-Open Bidirectional Analog-Signal Terminal. It can be either an input or
output.
20
19
18
17
22
21
20
19
NO4
NO3
NO2
NO1
Normally-Open Bidirectional Analog-Signal Terminal. It can be either an input or
output.
Normally-Open Bidirectional Analog-Signal Terminal. It can be either an input or
output.
Normally-Open Bidirectional Analog-Signal Terminal. It can be either an input or
output.
Pin Configurations
DG1207ETJ+
TOP VIEW
24 23 22 21 20 19 18 17
25
26
27
28
29
30
31
32
16
15
14
13
12
11
10
9
EN
A0
A1
NC
V
NEG
NC
COMA
NC
DG1207
NC
NC
A2
V
POS
NC
COMB
NC
+
GND
1
2
3
4
5
6
7
8
32 TQFN
5mm x 5mm
19-100804
www.maximintegrated.com
Maxim Integrated | 18
DG1206/DG1207
Low-Leakage, Single 16-Channel and
Dual 8-Channel, Analog Multiplexer
DG1207EUI+
TOP VIEW
1
+
28
27
26
25
24
23
22
21
20
19
18
17
16
15
COMA
V
POS
COMB
NC
2
3
V
NEG
NO8A
NO7A
NO6A
NO5A
NO4A
NO3A
NO2A
NO1A
EN
NO8B
NO7B
NO6B
NO5B
4
5
6
DG1207
7
NO4B
NO3B
NO2B
NO1B
GND
NC
8
9
10
11
12
13
14
A0
A1
NC
A2
28 TSSOP
Pin Description
PIN
NAME
FUNCTION
DG1207ETJ+ DG1207EUI+
POWER SUPPLY
Positive Power Supply. Bypass V
capacitor as close to the pin as possible.
to GND with a minimum 0.1μF ceramic
POS
29
1
V
V
POS
Negative Power Suppy. Bypass V to GND with a minimum 0.1μF ceramic
capacitor as close to the pin as possible. In single-supply applications, connect
NEG
25
9
27
NEG
V
NEG
to GND.
12
GND
NC
Logic Ground Reference
11, 12, 13,
26, 28, 30, 32
3, 13, 14
Not Connected
DIGITAL INPUTS
10
14
15
15
16
17
A2
A1
A0
Logic-Address Input. See the Control Logic section for more information.
Logic-Address Input. See the Control Logic section for more information.
Logic-Address Input. See the Control Logic section for more information.
Enable Input. Drive EN high to enable the multiplexer. Drive EN low to disable all
switches. Do not leave EN unconnected.
16
18
EN
ANALOG SWITCH
B-Side Common Bidirectional Analog-Signal Terminal. It can be either an input or
output.
31
2
COMB
COMA
A-Side Common Bidirectional Analog-Signal Terminal. It can be either an input or
output.
27
28
19-100804
www.maximintegrated.com
Maxim Integrated | 19
DG1206/DG1207
Low-Leakage, Single 16-Channel and
Dual 8-Channel, Analog Multiplexer
Pin Description (continued)
PIN
NAME
FUNCTION
DG1207ETJ+ DG1207EUI+
B-Side Normally-Open Bidirectional Analog-Signal Terminal. It can be either an
input or output.
1
2
4
NO8B
NO7B
NO6B
NO5B
NO4B
NO3B
NO2B
NO1B
NO8A
NO7A
NO6A
NO5A
NO4A
NO3A
NO2A
NO1A
B-Side Normally-Open Bidirectional Analog-Signal Terminal. It can be either an
input or output.
5
B-Side Normally-Open Bidirectional Analog-Signal Terminal. It can be either an
input or output.
3
6
B-Side Normally-Open Bidirectional Analog-Signal Terminal. It can be either an
input or output.
4
7
B-Side Normally-Open Bidirectional Analog-Signal Terminal. It can be either an
input or output.
5
8
B-Side Normally-Open Bidirectional Analog-Signal Terminal. It can be either an
input or output.
6
9
B-Side Normally-Open Bidirectional Analog-Signal Terminal. It can be either an
input or output.
7
10
11
26
25
24
23
22
21
20
19
B-Side Normally-Open Bidirectional Analog-Signal Terminal. It can be either an
input or output.
8
A-Side Normally-Open Bidirectional Analog-Signal Terminal. It can be either an
input or output.
24
23
22
21
20
19
18
17
A-Side Normally-Open Bidirectional Analog-Signal Terminal. It can be either an
input or output.
A-Side Normally-Open Bidirectional Analog-Signal Terminal. It can be either an
input or output.
A-Side Normally-Open Bidirectional Analog-Signal Terminal. It can be either an
input or output.
A-Side Normally-Open Bidirectional Analog-Signal Terminal. It can be either an
input or output.
A-Side Normally-Open Bidirectional Analog-Signal Terminal. It can be either an
input or output.
A-Side Normally-Open Bidirectional Analog-Signal Terminal. It can be either an
input or output.
A-Side Normally-Open Bidirectional Analog-Signal Terminal. It can be either an
input or output.
19-100804
www.maximintegrated.com
Maxim Integrated | 20
DG1206/DG1207
Low-Leakage, Single 16-Channel and
Dual 8-Channel, Analog Multiplexer
Detailed Description
The DG1206/DG1207 are single 16-channel or dual 8-channel multiplexing switch devices with low-leakage and low-
charge injection. The ultra-low capacitance and low-charge injection of the DG1206/DG1207 make them ideal for
automatic test equipment systems, data acquisition systems, sample-and-hold systems, and communication systems
where low glitch and fast settling time are required.
The DG1206 is a single 16-channel multiplexer. It switches one of the 16 NO_ inputs to a common output COM, as
determined by the four selection inputs A3, A2, A1, and A0. The DG1207 is a dual 8-channel multiplexer. It switches a
pair of differential NO_ inputs to differential outputs COMA and COMB, as determined by the three selection inputs A2,
A1, and A0. See the Control Logic section for more information.
The DG1206/DG1207 operate rail-to-rail and are fully specified for ±15V bipolar supplies or +12V single supply. The EN
input on DG1206/DG1207 is used to enable or disable the device. When EN is low, all channels are switched off. When
EN is high, each channel conducts bidirectionally according to the selection inputs.
Control Logic
The DG1206 uses four selection inputs A3, A2, A1, and A0 to determine the switching logic.
Table 1. DG1206 Control Logic
A3
X
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
A2
X
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
A1
X
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
A0
X
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
EN
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
SWITCH ON
Switch Off
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
The DG1207 uses three selection inputs A2, A1, and A0 to determine the switching logic.
Table 2. DG1207 Control Logic
A2
X
0
A1
X
0
A0
X
0
EN
0
SWITCH ON
Switch Off
1A, 1B
1
0
0
1
1
2A, 2B
0
1
0
1
3A, 3B
0
1
1
1
4A, 4B
19-100804
www.maximintegrated.com
Maxim Integrated | 21
DG1206/DG1207
Low-Leakage, Single 16-Channel and
Dual 8-Channel, Analog Multiplexer
Table 2. DG1207 Control Logic (continued)
A2
A1
A0
EN
SWITCH ON
5A, 5B
1
0
0
1
1
0
1
1
6A, 6B
1
1
0
1
7A, 7B
1
1
1
1
8A, 8B
19-100804
www.maximintegrated.com
Maxim Integrated | 22
DG1206/DG1207
Low-Leakage, Single 16-Channel and
Dual 8-Channel, Analog Multiplexer
Typical Application Circuits
Data Acquisition System with DG1206 Using Bipolar Supplies
+15V
-15V
0.1μF
0.1μF
V
V
NEG
POS
V
V
V
V
V
V
V
V
V
NO1
NO2
IN1
IN2
IN3
IN4
IN5
IN6
IN7
IN8
IN9
NO3
NO4
NO5
NO6
NO7
NO8
NO9
+5V
CS
SINGLE
ENDED
CLK
DG1206
COM
ADC
MISO
MOSI
V
IN10
V
IN11
V
IN12
V
IN13
V
IN14
V
IN15
V
IN16
NO10
NO11
NO12
MICRO-
PROCESSOR
NO13
NO14
NO15
NO16
A3
A2
GPO
GPO
GPO
GPO
A1
A0
EN
GPO
GND
19-100804
www.maximintegrated.com
Maxim Integrated | 23
DG1206/DG1207
Low-Leakage, Single 16-Channel and
Dual 8-Channel, Analog Multiplexer
Typical Application Circuits (continued)
Data Acquisition System with DG1207 Using Single Supply
+12V
0.1μF
V
POS
V
V
V
V
V
V
V
V
NO1A
NO2A
IN1+
IN2+
IN3+
IN4+
IN5+
IN6+
IN7+
IN8+
NO3A
NO4A
NO5A
NO6A
NO7A
NO8A
+3.3V
CS
COMA
COMB
CLK
DG1207
DIFFERENTIAL
ADC
MISO
MOSI
V
V
V
V
V
V
V
V
NO1B
IN1-
IN2-
IN3-
IN4-
IN5-
IN6-
IN7-
IN8-
NO2B
NO3B
NO4B
MICRO-
PROCESSOR
NO5B
NO6B
NO7B
NO8B
A2
A1
GPO
GPO
GPO
GPO
A0
EN
V
GND
NEG
Ordering Information
PART NUMBER
DG1206ETJ+*
PIN-PACKAGE
32 TQFN
TEMPERATURE
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
DG1206EUI+
28 TSSOP
32 TQFN
DG1207ETJ+*
DG1207EUI+
28 TSSOP
+ Denotes a lead(Pb)-free/RoHS-compliant package.
*Future products—contact factory for availability.
19-100804
www.maximintegrated.com
Maxim Integrated | 24
DG1206/DG1207
Low-Leakage, Single 16-Channel and
Dual 8-Channel, Analog Multiplexer
Revision History
REVISION REVISION
PAGES
CHANGED
DESCRIPTION
NUMBER
DATE
0
6/20
Initial Release
—
For pricing, delivery, and ordering information, please visit Maxim Integrated’s online storefront at https://www.maximintegrated.com/en/storefront/storefront.html.
Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent
licenses are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time. The parametric values (min and max
limits) shown in the Electrical Characteristics table are guaranteed. Other parametric values quoted in this data sheet are provided for guidance.
Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc.
© 2020 Maxim Integrated Products, Inc.
相关型号:
©2020 ICPDF网 联系我们和版权申明