AN1781 [MAXIM]

Graphics Chip Supply Delivers 1.65V at 26A; 图形芯片供应提供了1.65V的26A
AN1781
元器件型号: AN1781
生产厂家: MAXIM INTEGRATED PRODUCTS    MAXIM INTEGRATED PRODUCTS
描述和应用:

Graphics Chip Supply Delivers 1.65V at 26A
图形芯片供应提供了1.65V的26A

PDF文件: 总4页 (文件大小:32K)
下载文档:  下载PDF数据表文档文件
MAX34334CSE前5页PDF页面详情预览
POWER-SUPPLY CIRCUITS
Nov 11, 2002
Graphics Chip Supply Delivers 1.65V at 26A
Game boxes are using more powerful processors to provide more realistic
and complex graphics and games. As the processor power increases, so
does the current required to power the parts. The MAX1954 in the
application pictured below delivers 1.65V @ 26A from a 5V input.
Game boxes are using more powerful processors to provide more realistic and complex
graphics and games. As the processor power increases, so does the current required to power
the parts. The MAX1954 in the application pictured below delivers 1.65V @ 26A from a 5V input.
The MAX1954 is a 300kHz current-mode step-down controller. The MOSFET drivers are strong
enough to handle 100nC gate charge. Given the nominal input and output voltages, the duty
cycle is 33% and the on-resistance of the high- and low-side FETs are skewed accordingly. Two
IRF7811W with 12m on-resistance each are used for the high-side and two IRF7822 with
6.5m on-resistance each are used for the low-side. Two IRF7811W in parallel have better
switching characteristics than one IRF7822.
Seven 22uF/6V X5R ceramic capacitors are used for input bypassing to handle the 12.5Arms
input ripple current. At 5V input, ceramic capacitors are more cost effective and smaller than
electrolytics. In addition, the MAX1954 senses current by looking at the voltage across the high-
side FET on-resistance and ceramic bypass capacitors provide a better reference for the current-
sense circuitry. A 2.2nF ceramic capacitor is included drain-to-source across each low-side FET
to damp the parasitic ringing of the bond-wire inductance with the drain capacitance. This
ringing can affect the current-sense circuitry.
The pulse engineering inductor is a custom part designed to handle 70A peak current without
saturating. The MAX1954 uses a "valley" current limit based on the on-resistance of the low-side
FET. The current limit is 200mV divided by the low-side FET on-resistance (3.3m ) plus the
inductor ramp current (10A) which equals 70A. A 0.5uH/70A inductor is not readily available and
a custom design is required to provide short-circuit protection.
The Sanyo output capacitors provide a good balance among ESR, ripple current rating, and
cost. The capacitance is large enough for the output ripple to be dominated by the ESR. The
application does not require low-profile.
The catch-diode, D2, limits the negative voltage of the LX node when the high-side FET turns
off. In conjunction with R4, this controls the voltage on the boost capacitor, C8, at high-line and
maximum output current. Without D2 and R4, the voltage on C8 can BST to LX absolute
maximum voltage of 6V.
The MAX1954 delivers 1.65V @ 26A from a 5V input. The efficiency is 86% at 26A and 90% at
10A. The output ripple is 25mVpp.
Table 1.
Vin
5.0081
4.4905
5.0125
5.509
Iin
0.086
11.13
9.95
9.04
Vout
1.6663
1.6547
1.6530
1.6513
25mVpp
Iout
0
26
26
26
0.861
0.862
0.862
Efficiency
Figure 1.
The MAX1954 Bill of Materials: 4.5V to 5.5V Input, 1.65V @ 26A Output
Designation
C1
C2-C8
C9
C10-C13
C14
C15
C16
C17, C18
D1
L1
N1, N2
N3, N4
Q1
R1
R2
R3
R4
R5, R6
U1
Qty
1
7
1
4
1
1
1
2
1
1
2
2
1
1
1
1
1
2
1
Description
4.7uF 10V X5R ceramic capacitor (1206) Taiyo
Yuden LMK316BJ475ML
22uF 6V X5R ceramic capacitor (1210) Taiyo Yuden
JMK325BJ226MN
0.22uF ceramic capacitor (0603)
1000uF 4V aluminum electrolytic capacitor Sanyo
4MV1000EXR
10uF 10V X5R ceramic capacitor (1210) Taiyo
Yuden LMK325BJ106MN
1nF ceramic capacitor (0603) Kemet
C0603C102K8RAC
100pF ceramic capacitor (0603) Kemet
C0603C101K5GAC
2.2nF ceramic capacitor (0603) Kemet
C0603C222K8RAC
100mA 30V Schottky diode Central Semi CMPSH-3
0.5uH 30A Inductor Pulse Engineering PA0453
12m Ohm 30V N-ch MOSFET (SO-8) International
Rectifier IRF7811W
6.5m Ohm 30V N-ch MOSFET (SO-8) International
Rectifier IRF7822 or Siliconix Si4842DY
NPN Transistor (SOT-23) Central Semi CMPT3904
8.87k Ohm 1% resistor (0603)
8.25k Ohm 1% resistor (0603)
270k Ohm 5% resistor (0603)
1 Ohm 5% resistor (0603)
47k Ohm 5% resistor (0603)
MAX1954EUB (10-uMAX)
November 2002
More Information
MAX1954:
QuickView
--
Full (PDF) Data Sheet
相关元器件产品Datasheet PDF文档

AN17812B

Volume Control Circuit, 2 Channel(s), Bipolar, PDIP16, DIP-16
暂无信息
0 PANASONIC

AN1782

Small Footprint, 10us Response Time, 10mV Output Ripple, 1MHz, 6A Step-Down Regulator
暂无信息
167 MAXIM

AN1782

Small Footprint, 10us Response Time, 10mV Output Ripple, 1MHz, 6A Step-Down Regulator
暂无信息
64 MAXIM

AN17820B

Volume Control Circuit, 2 Channel(s), Bipolar, PSIP12, HSIP-12
暂无信息
0 PANASONIC

AN17823

BTL 4.0W X 1CH POWER AMPLIFIER
暂无信息
154 UTC-IC

AN17823G-H09-B-T

BTL 4.0W X 1CH POWER AMPLIFIER
暂无信息
40 UTC-IC