204-585-21 [MARL]
Direct replacement for T1 ¾ Bi-Pin; 直接替代T1 ¾双引脚型号: | 204-585-21 |
厂家: | MARL INTERNATIONAL LIMITED |
描述: | Direct replacement for T1 ¾ Bi-Pin |
文件: | 总5页 (文件大小:280K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
204 series
features
• Direct replacement for T1 ¾ Bi-Pin
• Flat topped for enhanced, even illumination of large lens
areas
• Reduces maintenance costs
• ‘Fit and Forget’ reliability
• Warm white LED may be used behind coloured lens as a
true replacement for a filament lamp
• Pack Quantity = 20 Pieces
specifications
Ordering information and typical characteristics (Ta = 25°C)
Current Luminous
Wave
Length
(nm)
Operating
Temp.
(°C)
Storage
Temp.
(°C)
Part
Voltage
Vac/dc
De-rating
Graphs
Colour
DC
Intensity
(mcd)
Number
(mA)
204-501-21-38
204-521-21-38
204-532-21-38
204-930-21-38
204-997-21-38
204-993-21-38
204-501-23-38
204-521-23-38
204-532-23-38
204-997-23-38
204-993-23-38
Red
Yellow
Green
12 Vdc
12 Vdc
20
20
20
20
20
20
17
17
16
16
16
600
600
630
585
515
465
-40 - +80
-40 - +80
-40 - +80
-30 - +85
-40 - +100
-40 - +100
-40 - +100
-40 - +100
-40 - +100
-40 - +100
-40 - +100
-40 - +100
-40 - +100
-40 - +100
-40 - +100
D
D
F
U
I
12 Vdc
800
Blue
12 Vdc
140
White
12 Vdc
27000
Call
* See below -30 - +85
* See below -30 - +85
Warm White
Red
12 Vdc
I
24-28 Vdc
24 - 28 Vdc
24-28 Vdc
24-28 Vdc
24-28 Vdc
600
630
585
515
-40 - +80
-40 - +80
-40 - +80
D
D
F
I
Yellow
Green
600
800
White
27000
Call
* See below -30 - +85
* See below -30 - +85
Warm White
I
* = Voltage for 20mA product is Vf at 20mA, not Vopr
- Products must be de-rated according to the de-rating information. Each de-rating graph refers to
specific LEDs. Please refer to graphs on page 2.
- Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated.
to order
to order please contact us on: t: +44 (0)1229 582 430
f: +44 (0)1229 585 155 e: sales@marl.co.uk w: www.leds.co.uk
© marl international limited technical documentation has been designed by marl international limited for the
intention of providing information, which must not be copied or released to a third party without prior
written consent from marl international limited. the information provided does not constitute part of any
order or contract and should not be regarded as a representation relating to either products or service. no
responsibility can be assumed for inaccuracies or printing errors. marl international limited reserve the right
BS EN ISO 9001:2008
to alter without notice the specification or any conditions of supply for product or service.
approved manufacturer
marl international limited - dsn 204 - version 2013-02-27-173140
page 1 of 5
204 series
technical data
15.3
6
Colour dot on product sleeve denotes LED colour.
Green dot on base indicates anode +ve termination.
Dimensions in mm (typical)
Not to scale
Metric Equivalent
Max. Power Dissipation
(mW)
Lamp Base Style
Series
(mm)
T1 ¾ Bi-Pin
204
5
500
997F-C
*Typical emission colour White
899F
*Typical emission colour Warm White
x
y
0.31
0.32
-
-
-
-
-
-
x
y
0.4255
0.4000
0.4390
0.4310
0.4680
0.4385
0.4519
0.4086
Intensities (Iv) and colour shades of white (x,y co-ordinates) may vary between leds within a batch
de-rating information
Derating Graph D
Derating Graph I
Derating Graph F
55
50
45
40
35
30
25
20
15
10
5
55
50
45
40
35
30
25
20
15
10
5
55
50
45
40
35
30
25
20
15
10
5
8.5
0
0
0
0.0
20.0
40.0
60.0
80.0 100.0
0.0
20.0
40.0
60.0
80.0 100.0
0.0
20.0
40.0
60.0
80.0 100.0
Ambient Temperature Ta (°C)
Ambient Temperature Ta (°C)
Ambient Temperature Ta (°C)
to order
to order please contact us on: t: +44 (0)1229 582 430 f: +44 (0)1229 585 155
e: sales@marl.co.uk w: www.leds.co.uk
© marl international limited technical documentation has been designed by marl international limited for the intention of
providing information, which must not be copied or released to
a third party without prior written consent from marl
international limited. the information provided does not constitute part of any order or contract and should not be regarded as a
representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl
international limited reserve the right to alter without notice the specification or any conditions of supply for product or service.
BS EN ISO 9001:2008
approved manufacturer
marl international limited - dsn 204 - version 2013-02-27-173140
page 2 of 5
204 series
de-rating information continued
Derating Graph U
55
50
45
40
35
30
25
20
15
10
8.5
5
0
0.0
20.0
40.0
60.0
80.0 100.0
Ambient Temperature Ta (°C)
to order
to order please contact us on: t: +44 (0)1229 582 430 f: +44 (0)1229 585 155
e: sales@marl.co.uk w: www.leds.co.uk
© marl international limited technical documentation has been designed by marl international limited for the intention of
providing information, which must not be copied or released to
a third party without prior written consent from marl
international limited. the information provided does not constitute part of any order or contract and should not be regarded as a
representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl
international limited reserve the right to alter without notice the specification or any conditions of supply for product or service.
BS EN ISO 9001:2008
approved manufacturer
marl international limited - dsn 204 - version 2013-02-27-173140
page 3 of 5
204 series
also available
Part numbers also available in the 204 series:
Part
Voltage
Vopr
Colour
Number
204-501-04-38
204-501-19-38
204-501-21
Red
Red
Red
20 mA dc
3.7 Vdc
12 Vdc
204-501-71-38
204-505-22
Red
Red
12 Vac 50 Hz
24 Vdc
204-521-21
204-532-20-38
204-532-21
Yellow
Green
Green
12 Vdc
5/6 Vdc
12 Vdc
204-532-71-38
204-585-21
204-899-23-50
204-905-22
Green
12 Vac 50 Hz
12 Vdc
Yellow
Warm White
-
28 Vdc
24 Vdc
204-907-23-38
204-930-04-38
204-930-21
Green
Blue
Blue
28 Vdc
20 mA dc
12 Vdc
204-930-23
Blue
28 Vdc
204-930-23-38
204-993-22-38
204-993-23
204-993-24-38
204-993-48-38
204-993-71-38
204-997-04
Blue
28 Vdc
24 Vdc
28 Vdc
48 Vdc
Warm White
Warm White
Warm White
Warm White
Warm White
White
60 Vdc
12 Vac 50 Hz
20 mA dc
24 Vdc
204-997-22-38
White
The products listed above illustrate all of the options available to order. These products may have custom modifications that
alter their operation beyond the generic information contained within this datasheet. Please contact sales for further
information.
RP = Reverse Polarity
to order
to order please contact us on: t: +44 (0)1229 582 430 f: +44 (0)1229 585 155
e: sales@marl.co.uk w: www.leds.co.uk
© marl international limited technical documentation has been designed by marl international limited for the intention of
providing information, which must not be copied or released to
a third party without prior written consent from marl
international limited. the information provided does not constitute part of any order or contract and should not be regarded as a
representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl
international limited reserve the right to alter without notice the specification or any conditions of supply for product or service.
BS EN ISO 9001:2008
approved manufacturer
marl international limited - dsn 204 - version 2013-02-27-173140
page 4 of 5
204 series
Single-Chip LEDs
design considerations
All devices feature water clear high intensity LEDs as standard. In devices where discrete LEDs are used, the single
chip LED devices have been modified by the removal of the domed portion of the encapsulation (flat-topped) to provide
even illumination of switches and annunciators. Non flat topped versions are also available.
Flat-topping does not apply to devices using surface-mounted device (SMD) LEDs.
Product Evaluation
Filament replacement LEDs have been specifically designed to meet the primary objective of providing improved reliability. As
this product range is suitable for both new-build and retro-fit, (sometimes in very old systems), a wide range of illuminated push
button switches and lamp holders can be encountered. Due to subjectivity, evaluation of the LED type is recommended,
(samples of all standard models are available). Care should be taken to correctly simulate operating ambient light conditions to
ensure that the correct device has been selected to maximise viewing characteristics such as viewing angle, colour
compatibility and on/ off contrast ratio.
Electro-Static Discharge (ESD)
Build up of electro-static discharge occurs in many situations involving people moving and handling products. The range of
possible situations is very diverse but voltage levels as high as several thousand volts can and do arise in many individual
situations. When an operator charged up to these levels handles a static sensitive device, there is a very probable likelihood
that the device will be irreversibly damaged. It is essential that precautions are taken at all stages during manufacture and
assembly of these products. Although LEDs were never considered to be static sensitive devices, changes in manufacturing
technology and materials used to produce higher intensity products over a large range of the wavelength spectrum have
changed this. Marl has an approved system of ESD control from goods in, through production and into final packing and
despatch. Marl recommend all users of LED based products follow the guidelines of BS 100015.
Power De-Rating
The forward voltage/ current value of an LED is dependant upon the ambient temperature of the environment in which it is
operated. Therefore, care must be taken to operate the LED at the correct voltage/ current values, depending upon the
ambient temperature. Consequently, a recommendation regarding operating voltages and currents is given in order to address
these temperature effects. This recommendation is termed ‘de-rating’. It is usual for forward voltages and currents to be
specified for ambient temperature of 25°C. However, because the values of these qualities vary with temperature, marl should
be contacted if the device is to be operated at a temperature significantly higher than 25°C. Marl accept no liability for any
product that is operated higher than the stated voltage.
to order
to order please contact us on: t: +44 (0)1229 582 430 f: +44 (0)1229 585 155
e: sales@marl.co.uk w: www.leds.co.uk
© marl international limited technical documentation has been designed by marl international limited for the intention of
providing information, which must not be copied or released to
a third party without prior written consent from marl
international limited. the information provided does not constitute part of any order or contract and should not be regarded as a
representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl
international limited reserve the right to alter without notice the specification or any conditions of supply for product or service.
BS EN ISO 9001:2008
approved manufacturer
marl international limited - dsn 204 - version 2013-02-27-173140
page 5 of 5
相关型号:
204-5LPST
Slide Dip Switch, 5 Switches, SPST, Latched, 0.1A, 50VDC, Solder Terminal, Surface Mount-straight, ROHS COMPLIANT
CTS
204-5LPSTR
Slide Dip Switch, 5 Switches, SPST, Latched, 0.1A, 50VDC, Solder Terminal, Surface Mount-straight, ROHS COMPLIANT
CTS
204-6LPST
Slide Dip Switch, 6 Switches, SPST, Latched, 0.1A, 50VDC, Solder Terminal, Surface Mount-straight, ROHS COMPLIANT
CTS
204-6LPSTR
Slide Dip Switch, 6 Switches, SPST, Latched, 0.1A, 50VDC, Solder Terminal, Surface Mount-straight, ROHS COMPLIANT
CTS
204-7LPST
Slide Dip Switch, 7 Switches, SPST, Latched, 0.1A, 50VDC, Solder Terminal, Surface Mount-straight, ROHS COMPLIANT
CTS
©2020 ICPDF网 联系我们和版权申明