CLV6A-FKB [MARKTECH]
Cree® PLCC6 3 in 1 SMD LED; Cree® PLCC6 3合1 SMD LED型号: | CLV6A-FKB |
厂家: | MARKTECH CORPORATE |
描述: | Cree® PLCC6 3 in 1 SMD LED |
文件: | 总11页 (文件大小:583K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
®
Cree PLCC6 3 in 1 SMD LED
CLV6A-FKB
Data Sheet
These SMD LEDs are packaged in an industry standard PLCC6 package.
These high performance tricolor SMT LEDs are designed to work in a wide
range of applications. A wide viewing angle and high brightness make
these LEDs suitable for outdoor signage applications.
The encapsulation resin contains UV inhibitors to minimize the effects of
long-term exposure to direct sunlight, resulting in stable light output over
the life of the LED.
FEATURES
• RoHS Compliant
• Size (mm): 5.5 x 5.5
APPLICATIONS
• Dominant Wavelength (nm):
Red (619-624 )
Green (520-540)
• Outdoor Full-Color Video Screen
• Decorative lighting
• Amusement
Blue (460-480)
• Luminous Intensity (mcd)
Red (560 - 1120)
Green (1120 - 2240)
Blue (280 - 560)
• Water-Resistant (IPX5*)
• Moisture Sensitivity Level: 3
• Lead-Free
* This part is tested under the condition of assembling it on a PCB with isolating the electrical path by silicone.
Subject to change without notice.
www.cree.com/ledlamps
1
Absolute Maximum Ratings (TA = 25°C)
Absolute Maximum Rating
Items
Symbol
Unit
R
50
G
35
B
35
Note 1
Forward Current
IF
mA
mA
Note 2
Peak Forward Current
Reverse Voltage
IFP
VR
PD
200
5
100
100
5
5
V
Power Dissipation
130
140
140
mW
°C
Operation Temperature
T
-40 ~ +100
-40 ~ +100
110
opr
Storage Temperature
Tstg
TJ
°C
Junction Temperature
110
450
650
230
230
110
450
680
200
200
°C
Junction/ambient 1 chip on
Junction/ambient 3 chips on
Junction/solder point 1 chip on
Junction/solder point 3 chips on
RTHJA
RTHJA
RTHJS
RTHJS
400
°C/W
°C/W
°C/W
°C/W
580
230
230
Electrostatic Discharge
Classification(MIL-STD-883E)
ESD
1000 V
Note:
1. Single-color light.
2. Pulse width ≤0.1 msec, duty ≤1/10.
Typical Electrical & Optical Characteristics (TA = 25°C)
Values
G
Characteristics
Condition
Symbol
Unit
R
B
Wavelength at peak emission
Dominant Wavelength
IF = 20 mA
IF = 20 mA
λPEAK
λDOM
630
527
470
nm
nm
619~624
520~540
460~480
Spectral bandwidth at 50% IREL max
Viewing Angle at 50% IV
IF = 20 mA
IF = 20 mA
Δ λ
2θ½
VF(avg)
VF(max)
IV(min)
IV(avg)
IR
24
120
2.0
2.6
560
700
10
38
120
3.2
28
120
3.2
4.0
280
400
10
nm
deg
V
Forward Voltage
IF = 20 mA
4.0
V
1120
1600
10
mcd
mcd
μA
Luminous Intensity
IF = 20 mA
VR = 5 V
Reverse Current (max)
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
2
CLD-CT1163.002
Intensity Bin Limit (IF = 20 mA)
Red
Green
Blue
Bin
Code
Min.
(mcd)
Max.
(mcd)
Bin
Code
Min.
(mcd)
Max.
(mcd)
Bin
Code
Min.
(mcd)
Max.
(mcd)
K
M
N
560
710
900
710
900
P
Q
R
1120
1400
1800
1400
1800
2240
G
H
J
280
355
450
355
450
560
1120
• Tolerance of measurement of luminous intensity is ±10%
Color Bin Limit (IF = 20 mA)
Red
Blue
Green
Bin Code
Min.(nm)
Max.(nm)
Bin Code
Min.(nm)
Max.(nm)
Bin Code
Min.(nm)
Max.(nm)
RB
619
624
B3
B4
B5
B6
460
465
470
475
465
470
475
480
G7
G8
G9
Ga
520
525
530
535
525
530
535
540
• Tolerance of measurement of dominant wavelength is ±1 nm
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
3
CLD-CT1163.002
Order Code Table*
Luminous Intensity (mcd)
Dominant Wavelength (nm)
Kit Number
Color
Package
Color
Bin
Min.
(nm)
Color
Bin
Max.
(nm)
Min.
Max.
Red
Green
Blue
560
1120
280
1120
2240
560
RB
G7
B3
RB
619
520
460
619
RB
Ga
B6
RB
624
540
480
624
Reel
Reel
Reel
Reel
Reel
Reel
Reel
Reel
Reel
CLV6A-FKB-CKNPRGJBB7a363
Red
Any 1 Intensity bin from K(560) - N(1120)
Any 1 Intensity bin from P(1120) - R(2240)
Any 1 Intensity bin from G(280) - J(560)
Any 1 Intensity bin from M(710) - N(1120)
Any 1 Intensity bin from Q(1400) - R(2240)
Any 1 Intensity bin from H(355) - J(560)
CLV6A-FKB-CK1P1G1BB7R3R3
CLV6A-FKB-CM1Q1H1BB7R3R3
Green
Blue
Any 1 hue bin from G7(520) - Ga(540)
Any 1 hue bin from B3(460) - B6(480)
Red
RB
619
RB
624
Green
Blue
Any 1 hue bin from G7(520) - Ga(540)
Any 1 hue bin from B3(460) - B6(480)
Notes:
1. The above kit numbers represent the order codes which include multiple intensity-bin and color-bin codes. Only one
intensity-bin code and one color-bin code will be shipped on each reel. Single intensity-bin code and single color-
bin code will be orderable in certain quantities.
2. For example, any 1 intensity-bin from K - N means only 1 intensity-bin (K or M or N) will be shipped by Cree.
3. For example, any 1 color-bin from G7 - Ga means only 1 color-bin (G7 or G8 or G9 or Ga) will be shipped by Cree.
4. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions.
5. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED
product safely.
Cree, Inc.
4600 Silicon Drive
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
4
CLD-CT1163.002
Graphs
The above data are collected from statistical figures that do not necessarily correspond to the actual
parameters of each single LED. Hence, these data will be changed without further notice.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
5
CLD-CT1163.002
Graphs
The above data are collected from statistical figures that do not necessarily correspond to the actual
parameters of each single LED. Hence, these data will be changed without further notice.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
6
CLD-CT1163.002
Mechanical Dimensions
All dimensions are in mm.
Notes
RoHS Compliance
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or
otherwise restricted materials in this product are below the maximum concentration values (also referred to as the
threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Direc-
tive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(RoHS), as amended through April 21, 2006.
Vision Advisory Claim
Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.
Cree, Inc.
4600 Silicon Drive
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
7
CLD-CT1163.002
Kit Number System
Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage,
and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED
Lamp Packaging Standard” document for more information about shipping and packaging options.
Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following
manner:
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
8
CLD-CT1163.002
Reliability
Tests and Results
Number of
Damaged
Test
Applicable Standards
Test Condition
Note
100 cycles
100 cycles
10 cycles
500 hrs
500 hrs
500 hrs
15min
JEITA ED-4701
100 105
-40°C~25°C~100°C~25°C
30 mins, 5 mins, 30 mins, 5 mins
Temperature Cycle
0/45
0/45
0/45
0/45
0/45
0/45
0/45
0/45
0/45
0/45
0/45
0/45
0/45
-40°C~100°C
30 mins, 30 mins
Thermal Shock
Moisture Resistance
MIL-STD-202G
JEITA ED-4701
25°C~65°C~
90%RH 24hrs/1cycle
200 203
JEITA ED-4701
High Temperature Storage
Temperature Humidity Storage
Low Temperature Storage
Water Proof Test*
TA=100°C
200 201
JEITA ED-4701
TA=60°C
RH=90%
100 103
JEITA ED-4701
TA=-40°C
200 202
IP X5
IEC 60529:2001
Water flow rate 12.5 l/min
TA=85°C
IF=15 mA
High Temperature Life Test
Life Test
-
-
-
-
1000 hrs
1000 hrs
500 hrs
500 hrs
2 times
/
T =25°C
IF: R=30mAAG=35mA B=20mA
60°C RH=90%
IF=15 mA
High Humidity Heat Life Test
Low Temperature Life Test
Ta=-40°C
IF: R=30mA G=35mA B=20mA
Resistance to Soldering Heat(Reflow
Soldering)
JEITA ED-4701
Tsol=260°C,10sec
(Pre treatment 30°C,70%,168hrs)
300 301
MIL-STE-883
Method 2007
20G min, 20 to 2000Hz, 4cycles, 4mins,
Each x,y,z
Vibration-variable Frequency
Human body model 1000 V
(Forward and reverse current conduct
electricity each 1time)
Electrostatic Discharge Test
AEC(Q101-001)
/
0/45
Water proof test*: The test is conducted on component level. It is strongly recommended the customers test the
products for their application
Failure Criteria
Criteria for Judgment
Test
Item
Symbol
Condition
Min.
Max.
Forward Voltage
Reverse Current
VF
IR
IF = 20 mA
VR = 5 V
–
Initial Data x 1.1
-
100 μA
Luminous Flux/Intensity
ФV
IF = 20 mA
Initial Data x 0.7
-
Resistance to Soldering
Heat
-
-
IF = 20 mA
IF = 20 mA
No dead lamps and visual damage
Vibration-variable
Frequency
No dead lamps and visual damage
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
9
CLD-CT1163.002
Reflow Soldering
•ꢀ TheꢀCLV6A-FKBꢀisꢀratedꢀasꢀaꢀMSLꢀ3ꢀproduct.ꢀꢀ
•ꢀ Theꢀrecommendedꢀfloorꢀlifeꢀoutꢀofꢀbagꢀisꢀ24hrs.ꢀ
•ꢀ Theꢀbestꢀpracticesꢀsuggestionꢀisꢀtoꢀuseꢀtheꢀproductꢀasꢀsoonꢀasꢀpossibleꢀwhenꢀremovedꢀfromꢀtheꢀbag.ꢀ
•ꢀ Theꢀtemperatureꢀ(TopꢀsurfaceꢀofꢀSMDꢀLED)ꢀprofileꢀisꢀasꢀbelow:
Melting-point
Cooling
Pre-heat
Soak
Reflow
Time
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
Use only with CLV6A-FKB Solderingꢀpad:
2.7
Solder = Low Lead-Free
Average ramp-up rate = 4ºC/s max
Preheat temperature = 150ºC ~200ºC
Preheat time = 120s max
Ramp-down rate = 6ºC/s max
Peak temperature = 235ºC max
Time within 5ºC of actual Peak Temperature = 10s max
Duration above 217ºC is 45s max
8.2
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
10
CLD-CT1163.002
Package
• The boxes are not water resistant and they must be kept away from water and moisture.
• The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags.
• Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation.
• The reel pack is applied in SMD LED.
• Max 900 pcs per reel.
防潮珠。不可食
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
11
CLD-CT1163.002
相关型号:
©2020 ICPDF网 联系我们和版权申明