6312138-1 [MACOM]
RF Coax Products; 射频同轴产品
| 型号： | 6312138-1 |
| 厂家： | 
Tyco Electronics |
| 描述： | RF Coax Products |
| 文件： | 总320页 (文件大小：8280K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
RF Coax Products
RF Coax Connectors
Introduction
The Tyco Electronics
RF Coaxial catalog
such as MCX, SMP, DIN,
and BlindMate provide
Product Facts
How to Use This Catalog
■ Listed under the Component
Program of Underwriters
Laboratories Inc.,
File No. E-81956
as indicated by Product
Family
Based on the communica-
tions gear that you are
designing:
■ Wireless Basestations
■ Carrier Rack Equipment
■ Chassis Set Top Box
■ NIC Card
combines the best products panel to board and back-
from industry leading brand
names like M/A-COM and
AMP. We have integrated
these into one cohesive set
of RF products focused
specifically on wireless,
wireline carrier, and enter-
prise networking sectors of
the world telecom equip-
ment market.
plane connections. Finally,
our micro miniature SSMT,
and MMCX series provide
excellent board to board
and card edge to board
solutions.
R
■ Recognized under the
Component Program of
Underwriters
All of these interfaces are
supported with cable termi-
nating tools and between
series adapters to meet all
your requirements for trou-
ble free terminations at the
lowest applied cost. The
appendices hold a wealth
of information including a
Theory and Application
Typical equipment drawings
on pages 306-309 guide
you to the interconnect
section(s) in this catalog.
R
Laboratories Inc.,
File No. E-81956 as
indicated by Product Family
Tyco Electronic’s broadest
selection of RF connectors
and coaxial cable assem-
blies provides you with a
solution for every intercon-
nection requirement.
Type N and 7/16 connec-
tors are used where high
power and rugged reliability notes on White Bronze plat-
■ Certified by Canadian
Standards
Association
File No. LR 7189 as
indicated by Product Family
Selection guides will direct
you to products based
on performance and
mechanical requirements
such as impedance, VSWR,
max. frequency, power
handling, etc.
R
tutorial, RG/U cable specifi-
cation tables, Application
■ Produced under a Quality
Management System
certified to ISO 9001
There are other guides
to help you find the right
connection: A table of
contents listed by interface
type, a complete connector
type selector describes
each interface with typical
applications, and a mini-
selection guide shows
key parameters to quickly
pinpoint the right connector
type.
are required, typically as
antenna feeds, filter/
ing and intermodulation
distortion.
A copy of the
certificate is available
upon request
combiner I/O’s, and power
amplifier outputs. SMA,
SMB, and TNC connectors
are the primary cable inter-
face for inner cabinet rout-
ing and are available in
panel mount, board mount,
and cable terminations.
Subminiature connectors
Whether you need rugged
external RF power cables,
panel mount, board to
board, blindmate, or DIN,
Tyco Electronics has the
connection.
Need more information?
Restriction on the use of Hazardous Substances Getting the Information You Need
(RoHS)
Our comprehensive on-line RoHS Customer Support Center
provides a forum to answer your questions and support your
RoHS needs. A RoHS FAQ (Frequently Asked Questions) is
available with links to more detailed information. You can also
submit RoHS questions and receive a response within 24
hours during a normal work week. The Support Center also
provides:
■ Cross-Reference from
Non-compliant to Compliant
Products
Call Technical Support at
the numbers listed below.
At Tyco Electronics, we’re ready to support your RoHS require-
ments. We’ve assessed more than 1.5 million end items/com-
ponents for RoHS compliance, and issued new part numbers
where any change was required to eliminate the restricted
materials. Part numbers in this catalog are identified as:
RoHS Compliant — Part numbers in this catalog are RoHS
Compliant, unless marked otherwise. These products comply
with European Union Directive 2002/95/EC as amended 1
January 2006 that restricts the use of lead, mercury, cadmium,
hexavalent chromium, PBB, and PBDE in certain electrical and
electronic products sold into the EU as of 1 July 2006.
NOTE: For purposes of this Catalog, included within the defini-
tion of RoHS Compliant are products that are clearly “Out of
Scope” of the RoHS Directive such as hand tools and other
non-electrical accessories.
Non-RoHS Compliant — These part numbers are identified
with a “ꢀ” symbol. These products do not comply with the
material restrictions of the European Union Directive
2002/95/EC.
Technical Support is staffed
with specialists well versed
in all Tyco Electronics
products. They can provide
you with:
■ Technical Support
■ Catalogs
■ Technical Documents
■ Product Samples
■ Tyco Electronics
Authorized Distributor
Locations
■ Ability to browse RoHS
Compliant Products in our
on-line catalog
■ Downloadable Technical Data
Customer Information
Presentation
■ More detailed information
regarding the definitions used above
RoHS
Customer
Support
Center
■ So whatever your questions when it comes to RoHS, we’ve
got the answers at www.tycoelectronics.com/leadfree
NOTE: Information regarding RoHS compliance is provided
based on reasonable inquiry of our suppliers and represents
our current actual knowledge based on the information provided
by our suppliers. This information is subject to change. For lat-
est compliance status, refer to our website referenced at right.
2
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
RF Coax Connectors
RF Catalog Table of Contents
Disclaimer
While Tyco Electronics Corporation
and its affiliates referenced herein
(“Tyco Electronics”) have made every
reasonable effort to ensure the accuracy
of the information in this catalog,
Tyco Electronics does not guarantee that
it is error-free, nor does Tyco Electronics
make any other representation, warranty
or guarantee that the information is
accurate, correct, reliable or current.
Tyco Electronics reserves the right to
make any adjustments to the information
contained herein at any time without
notice. Tyco Electronics expressly dis-
claims all implied warranties regarding
the information contained herein, includ-
ing, but not limited to, any implied war-
ranties of merchantability or fitness for
a particular purpose. Tyco Electronics’
only obligations are those in the
Miniature Connectors
7-16 Series Connectors.................................................................................................7-11
Lightning Protection Connectors .................................................................................12-19
Surge Protectors ......................................................................................................12-15
ꢀ/4 Wave Stub Tuners ..............................................................................................16-19
N Series Connectors....................................................................................................20-25
Quick Lock N (QLN) Series Connectors .....................................................................26-28
TNC Connectors ..........................................................................................................29-43
BNC Connectors..........................................................................................................44-77
Mini BNC Connectors..................................................................................................78-81
Decoupled Connectors................................................................................................82-87
Self-Terminating PC Board Connectors............................................................................88
Twin BNC Connectors..................................................................................................89-92
F Series and G Series Connectors..............................................................................93-99
Subminiature Connectors
SMA Connectors......................................................................................................100-123
QMA Connectors .....................................................................................................124-128
DIN Connectors .......................................................................................................129-156
Series 1.0/2.3 .......................................................................................................129-137
Series 1.6/5.6 .......................................................................................................138-146
Measurement Accessories...................................................................................147-150
Coaxial Cables ............................................................................................................151
SMP Connectors......................................................................................................152-156
Blind Mate Connectors............................................................................................157-175
OSP Miniature Blind Mate Connectors ................................................................157-168
OSSP Subminiature Blind Mate Connectors........................................................169-175
SMB Connectors......................................................................................................176-192
SMC Connectors......................................................................................................193-195
MCX Connectors......................................................................................................196-203
Compression Coax Board-to-Board Connectors............................................................204
STAX Coax Connectors ..........................................................................................205, 206
Tyco Electronics Standard Terms and
Conditions of Sale, and in no case will
Tyco Electronics be responsible for any
incidental, indirect, or consequential
damages arising from the sale, resale,
use, or misuse of its products. Users
should independently evaluate the suit-
ability of, and test each product for, their
application.
The dimensions, specifications, designs,
construction, materials and processes in
this catalog are for reference purposes
only and are subject to change without
notice. Please consult Tyco Electronics
for the most current product information.
The export of certain Tyco Electronics
products is restricted by the Arms Export
Control Act (Title 22, U.S.C. Sec 2751, et
seq.) or the Export Administration Act of
1979, as amended (Title 50, U.S.C., App.
2401 et seq.). Orders may be subject to
export approval by the U.S. Government.
Buyer must comply with all applicable
export laws of all applicable jurisdictions.
© Copyright 2007, 2000, 1998,
1994, 1992, 1990, and 1982 by
Tyco Electronics Corporation.
All International Rights Reserved.
Micro Miniature RF Coax Connectors
SMT/QuickGrip Connectors.....................................................................................207-211
SSMT Connectors....................................................................................................212-217
MMCX Connectors...................................................................................................218-221
UMCC Connectors...................................................................................................222-228
Switching Coax Connectors ....................................................................................229-236
Quick Snap Stripline (QSL) Connectors.........................................................................237
ACTION PIN, AMP, AMP-HDI, AMPLIMITE,
AMP-O-LECTRIC, CERTI-CRIMP,
COAXICON, M/A-COM, OSP, OSSP,
PIDG, PRO-CRIMPER, RAYCHEM,
SIEMAX, SMT/QuickGrip, SOLISTRAND,
STAX, TE LOGO, TYCO ELECTRONICS
and Z-PACK are trademarks.
AT&T is a trademark of AT&T Corporation.
BELDEN is a trademark of Belden Wire
and Cable Company.
Multi Position Connectors
DIN Inserts...............................................................................................................238-241
Size 8 Contacts.......................................................................................................242, 243
COAXICON Contacts...............................................................................................244-248
SIEMAX Connectors ...............................................................................................249, 250
BERK-TEK is a trademark of Nexans, Inc.
COMM/SCOPE is a trademark of
Commscope, Inc.
DANIELS is a trademark of Daniels
Manufacturing Corporation.
GPO is a trademark of Corning Gilbert, Inc.
HIROSE is a trademark of Hirose Electric.
MURATA is a trademark of Murata
Electronics, Inc.
ROLM is a trademark of the Rolm Corp.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
TPX is a trademark of Mitsui Chemicals
America, Inc.
TROMPETER is a trademark of
Trompeter Electronics, Inc.
VALOX is a trademark of General Electric
Company.
Other products, logos, and company
names mentioned herein may be
trademarks of their respective owners.
See inside back cover for Global
Contacts and phone numbers.
Between Series Adapters............................................................................................251-260
Coaxial Terminations .........................................................................................................261
Application Tooling .....................................................................................................262-268
Cable Assembly Capabilities......................................................................................269-271
Appendix
A - Theory and Application......................................................................................272-277
B - White Bronze Application Note..........................................................................278-280
C - Intermodulation Application Note......................................................................281-283
D - Typical Coaxial Cable Specifications ................................................................284-298
E - Maximum Power Handling Capabilities for Cables ..................................................299
F - Nominal Loss Characteristics for Cables..................................................................300
G - Glossary of Terms..............................................................................................301-305
RF Coaxial Solutions for Communications Equipment Overview..............................306-309
RoHS Compliant to Non-RoHS Compliant Part Number Cross Reference ................310-312
M/A-COM Part Number Cross Reference...................................................................313, 314
Part Number Index......................................................................................................315-318
3
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Connector Selection
Connector Types
7-16 Series connectors are designed for medium to high power applications such as cellular base
stations, control components, antenna and broadcast. The 7-16 Series minimizes intermodulation
distortion by white bronze or silver plating the electrical path. Combined hex/knurl coupling nuts
allow for manual or torque tightening, further reducing distortion by providing a strong butt joint.
Lightning Protection devices have an integral surge arrestor capsule which is designed to protect
equipment from high current pulses. It is effective against very fast rise times as induced by electromag-
netic pulses from nuclear explosions (NEMP) and the slower pulses arising from lightning strikes (LEMP).
N Series threaded connectors have an air dielectric interface and are low cost. These connectors
operate to 11 GHz and are commonly used in cable-based local-area networks (LAN’s) medium
power transmitters, and base station antenna applications.
TNC connectors have an interface similar to BNC except for a threaded coupling nut. The tighter fit
provided by this screw-on connection improves interface control allowing connectors to operate up to
11 GHz. TNC connectors are excellent for mobile units where top-notch performance is required
under vibration.
BNC connectors offer easy engagement and disengagement using bayonet couplings and overlap-
ping dielectrics. They are most useful for frequently coupled and uncoupled RF connections with fre-
quencies below 4 GHz. BNC connectors find applications in flexible networks, instrumentation, and
computer peripheral interconnections.
F & G Series connectors offer enhanced performance beyond 1 GHz. Designed to meet the rigor-
ous requirements of Bellcore TA-NWT-001503 and SCTE specifications, the F & G series provides
high current carrying capabilities in both sealed and un-sealed configurations. Plugs, jacks and
adapters are available in threaded and push-on versions. These connectors meet the evolving
needs of the communications industry for increased reliability and performance.
SMA threaded connectors are widely used in microwave communications. Connectors operate to at
least 12.4 GHz on flexible coax cables, and up to 26.5 GHz on semi-rigid coax cables. Crimp-on
SMA connectors that operate to 26.5 GHz are available.
Blind Mate connectors operate to 22 GHz for OSP connectors, 28 GHz for OSSP connectors, and
40 GHz for SMP style connectors. These connectors offer easy slide-on connection and require less
alignment between the cable and the equipment than other connectors with comparable band width.
Blind Mate connectors are widely used as coaxial interconnects between plug-in modules and moth-
erboards when axial and radial misalignments are necessary.
SMB connectors feature a snap coupling for fast connection. A self centering outer spring and over-
lapping dielectric allows easy snap-on and excellent performance even in moderate vibration. The
SMB is smaller in size than the SMA and excellent where engineers are concerned about circuit
miniaturization. Typical application is inter- or intra-board connection of RF or digital signals.
Commercial 50 ohm versions operate to 4 GHz, and 75 ohm versions reach 2 GHz.
MCX connectors offer a high reliability, space saving sub-miniature coaxial cable to cable and cable
to board interconnection system. The MCX connectors impedance types are applicable up to 6 GHz.
Surface Mount (SMT) connectors. The RF solution to the communication and information age.
Tyco Electronics’ SSMT and SMT Quick Grip connectors are designed to meet the growing demand
for surface mount RF connector technology. These connectors operate up to 6 GHz utilizing cable
assembly design to terminate to SMT connectors. Surface mount connectors contribute to high
density packaging and high volume manufacturing requirements.
Multi Position connectors. These connector series, including the 1.0/2.3 (CECC 22230), 1.6/5.6
(CECC 22240), Subminiature D (DIN 41652 and CECC 75 301-082), and Tyco Electronics’ own
SIEMAX multi coax connector series offer the customer a broad choice of options where density and
performance are a major concern. The 1.0/2.3 series contacts are available in both 50 and 75 Ohm
versions and are designed for use to 10 GHz. The different types of coupling mechanisms, such as
screw on, slide-in and latching coupling provide for a variety of space-saving installations. The con-
nector series 1.6/5.6 has been modified to incorporate improved technical advantages. A 75 Ohm
design for use up to 8 GHz, it offers excellent screening effectiveness and is a most suitable compo-
nent for those applications where the transmission of high bit rates is required. In Subminiature D
type connectors these interfaces provide good electrical grounding and electromagnetic shielding in
a small package size. These plug connectors address the increasing demands related to EMC
(electromagnetic compatibility) and RFI (immunity to radiated noise), and are widely used as inter-
face connectors in office and data systems, telecommunications equipment, and in measurement
and control systems. Tyco Electronics’ SIEMAX connectors combine the benefits of surface mount
technology and modular design. This 75 Ohm connector series operates up to 2 GHz and offers a
compact grid pitch of 10mm. Its uses include multiplex and high-density systems, and Base Station
applications.
Miscellaneous connector types include multiple-circuit connectors that use coaxial contacts in a
pin-and-socket configuration, crimp-on ferrules that offer fast, reliable connections for attaching one or
more ground taps to shielded wire and braided shield terminations for connecting cable shields to pc
boards. Also available are network/premises interconnect products for Ethernet/IEEE 802.3 systems
and coaxial taps for simple, dependable connections from transceiver to LAN without cutting the cable.
4
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Connector Selection Guide
Nominal
Impedance
Ohms
Maximum
Frequency
GHz
Temperature
Maximum
Peak
Connector
Body
Cable Retention
lb
Coupling
Durability
Cycles
Page
No.
Product
7-16 Series
Rating
C
Mechanism
[N]
Voltage
Finish
50
50
7
-55° to +155°
-45° to +85°
RG8A/U
—
—
Threaded
Threaded
4000
650
500
500
White Bronze
White Bronze
7
Lightning Protection
2.5
Adapter
12
N Series
90
50
50
50
50
75
50
50
50
50
50
75
11
7
-65° to +85°
-65° to +165°
-65° to +165°
-55° to +85°
-55° to +85°
-65° to +165°
-65° to +165°
-55° to +85°
-55° to +85°
-65° to +165°
-65° to +85°
-55° to +85°
400.3
266.9
266.9
266.9
266.9
266.9
266.9
266.9
266.9
177.9
266.9
111.2
Threaded
Threaded
Threaded
Threaded
Threaded
Bayonet
Bayonet
Bayonet
Bayonet
Bayonet
1000
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
200
Nickel
Silver
20
29
29
29
29
44
44
44
44
44
44
89
Commercial
(RG-214/U)
TNC
Single Crimp
60
(RG-58C/U)
TNC
Dual Crimp
60
11
7
Silver or Nickel
Nickel
(RG-58C/U)
TNC
Commercial
60
(RG-58C/U)
TNC
75 Ohm
60
2
Nickel
(RG-59B/U)
BNC
Single Crimp
60
2.5
4
Silver or Nickel
Silver or Nickel
Nickel
(RG-58C/U)
BNC
Dual Crimp
60
(RG-58C/U)
BNC
60
4
Dual Crimp Commercial
(RG-58C/U)
BNC
Hex Crimp
60
4
Nickel
(RG-58C/U)
BNC
Field Serviceable
40
4
Nickel
(RG-142B/U)
BNC
75 Ohm
60
2
Bayonet
Bayonet
Nickel
(RG-59B/U)
Non-
constant
25
Twin BNC
F Series
—
Silver or Nickel
Nickel
(RG-108/U)
40
75
75
—
—
-55° to +85°
-55° to +85°
(Series 59, 6, 7
Single Braid)
—
—
Threaded (F)
Push-On (G)
500
500
200
200
93
93
40
G Series
(Series 59, 6, 7
Single Braid)
Nickel
SMA
60
Gold or Passivated
Stainless Steel
50
50
50
50
50
50
50
50
50
50
75
26.5
12.4
40
22
12.4
28
—
-65° to +105°
-65° to +165°
-65° to +165°
-65° to +125°
-65° to +125°
-65° to +125°
-65° to +125°
-65° to +85°
-65° to +85°
-65° to +165°
-65° to +165°
266.9
177.9
89
Threaded
Threaded
Snap-On
Push-On
Push-On
Push-On
Push-On
Snap-On
Threaded
Snap-On
Snap-On
500
500
500
500
335
335
250
335
250
500
500
500
500
100
100
152
157
157
169
169
176
193
196
196
Semi-Rigid
(RG-402/U)
SMA
Flexible
40
Gold or Passivated
Stainless Steel
(RG-58C/U)
20
SMP
100
Gold
(RG-405/U)
OSP
Semi-Rigid
60
Gold or Passivated
Stainless Steel
267.02
178
89
5000
5000
5000
5000
500
(RG-402/U)
OSP
Flexible
40
Gold or Passivated
Stainless Steel
(RG-58/U)
OSSP
Semi-Rigid
20
Gold or Passivated
Stainless Steel
(RG-405/U)
OSSP
Flexible
20
Gold or Passivated
Stainless Steel
89
(RG-316/U)
20
SMB
SMC
4
89
Nickel
Gold
(RG-316/U)
20
10
6
89
500
(RG-174/U)
20
32
500
Nickel
Nickel
(RG-316/U)
MCX
Connectors
20
6
32
500
(RG-187/U)
SMT Quick Grip
SSMT
50
50
3
6
-40° to +125°
-40° to +125°
Omni-Flex
Omni-Flex
—
—
Snap-On
Snap-On
250
250
5
Gold
Gold
207
212
100
10
MMCX
50
75
6
2
-55° to +155°
-40° to +85°
44.5
—
Snap-On
Bayonet
500
300
500
500
218
78
Gold
(RG-178/U)
20
(735A)
Mini BNC
Nickel
20
QMA
50
50
50
6
4
-40° to +125°
-40° to +125°
-40° to +85°
—
—
—
Quick Lock
N/A
335
125
500
100
25
124
204
129
Nickel
Gold
—
(RG-316/U)
Comp. Coax
N/A
Thread/
Snap/Slide
—
10
500
DIN 1.0/2.3
Thread/
Snap/Slide
—
75
50
2
-40° to +85°
—
—
—
500
—
500
—
—
129
229
Switching Coax
2.4
N/A
N/A
30,000
5
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Connector Selection (Continued)
By reviewing this catalog, a connector can be found to
Method of Termination
match most any application. Since the RF connector is a
part of a transmission line system, make sure when select-
ing a new connector design, that it is compatible with the
overall system’s performance.
Tyco Electronics provides connectors that can be termi-
nated to coaxial cable, printed circuit boards or other con-
nector interfaces.
Selection of the proper connector to terminate to an RG
cable is simplified by using the format of this catalog.
Experience has proven that certain connector types lend
themselves to termination of particular coax cable sizes.
For example, miniature cables such as RG 188 are most
practically terminated to subminiature connectors such
as SMB and SMC styles. Figure 3 illustrates the interface
diameters of each connector type and the dielectric out-
side diameter (DOD) of popular RG cables. It is most eco-
nomical to select a connector that terminates to a cable
with a dielectric diameter close in size to the connector’s
interface diameter. The product information sections of this
catalog have been organized so that all connector con-
struction types are grouped together by cable size. This
allows easy selection of the connector construction best
suited for the application.
Construction
The construction of a connector will greatly affect the
purchase price. The connector tables in this catalog
include construction details that allow you to select con-
nectors that meet your requirements at the lowest price.
Commercial designs use lower cost materials, such as zinc
diecast bodies, polypropylene insulators and silver-plated
contacts. Specific details of connector construction are
listed in each product section of this catalog.
The materials used affect both performance and cost.
Common base metals include brass, beryllium copper and
stainless steel. The most common plating used for the cen-
ter contact is gold because of its low contact resistance,
superior mating properties and corrosion resistance.
TEFLON, polypropylene and polymethylpentene (TPX) are
the most common connector dielectrics. TEFLON offers the
lowest loss, the most stable electrical properties and high-
est operating temperature. But since it cannot be injection
molded, manufacturing is more costly than other materials.
Be certain, when specifying connectors, that the tempera-
ture and voltage limitations are taken into consideration.
Tyco Electronics continually looks at new cable types
and will release new part numbers based upon general
market or specific customer needs. If you cannot find a
Tyco Electronics part number for a specific cable type,
please contact one of our sales locations or your local
distributor to make an inquiry.
Assembly
Tyco Electronics offers a wide range of connector configu-
rations for terminating to printed circuit boards. Also avail-
able are connectors which allow the interconnection of one
interface type to another.
There are several methods of assembly or termination, but
they can be categorized into two major areas: (1) Solder
center conductor and clamp braid (Category A) and (2)
Crimp center conductor and crimp braid. Other methods
are derived from combinations of the above, (e.g., solder
center conductor and crimp braid. Method (1) (Category
A) is generally used where no specialized tools are avail-
able, such as with field installations. With the development
of low cost assembly tools, method (2) is becoming more
popular for field installation.
RG-8
RG-6
Crimping is preferred in most manufacturing environments
where assembly tooling is available because terminations
can be made in the least amount of time and with the
greatest reliability. The design of crimp tools assures that
every termination is made the same; this cannot be done
with a clamp design without further testing or inspection.
Figure 4 illustrates the difference between braid crimping
using AMP “O” crimp and the industry-standard hex crimp.
The AMP “O” crimp gives a more consistent pressure on
the outer collar. In addition, the crimp of the center con-
ductor provides superior VSWR as shown in Figure 5.
N
RG-59/62
RG-58/142
BNC/TNC
SMA
RG-180
SMB/C
RG-188
RG-178
Benefits derived by using AMP “O” crimp:
■
No soldering of center contact is required. This allevi-
ates all prospective problems associated with the sol-
dering process such as excess solder, cold solder
joints and overheating the dielectric.
Fewer parts resulting in less assembly errors
Braid crimping which eliminates the need for the
combing, screwing and torquing associated with the
braid clamp.
0
0.1
0.2
0.3
0.4
0.5
Diameter (Inches)
■
■
Connector
Cable Type
Figure 3
TEFLON is a trademark of E.I. Dupont de Nemours and Company.
TPX is a trademark of Mitsui Chemicals America, Inc.
6
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
7-16 Series Connectors
Product Facts
■ Designed for cellular base-
stations, control component,
antenna and broadcast
applications
■ Available in White Bronze
plating
■ Minimizes Intermodulation
Distortion by the use of
non-ferrous materials
■ Hex knurl for wrench
tightening
■ Available for several
popular RG cable sizes in
solder-clamp and crimp-
crimp attachment styles
Tyco Electronics offers a
comprehensive range of
7-16 Connectors to suit
The series has been
designed for these
designed to reduce
IMD through the use of non-
ferrous base materials and
by silver plating of the elec-
trical path. The proprietary
White Bronze plating tech-
nique is standard, providing
high corrosion resistance,
low porosity, scratch
demanding environments
today’s challenging Wireless and can withstand a mini-
Infrastructure Market. This
market demands reliable,
intermodulation sensitive
connectors that accommo-
date higher power.
mum of 500 mating cycles.
Popular RG cable sizes are
covered in both
solder/clamp and crimp
attachment styles. Two
piece combination connec-
tors adapt to straight or
right-angle configurations,
minimizing the number of
different part codes needed
by the customer. Series N to of connectors, depending
7-16 between series
adapters facilitate the transi-
tion between system inter-
faces as well as providing a
test interface.
resistance, low RF loss
Tyco Electronics 7-16
and a non-magnetic finish.
Incorporation of hex-knurl
coupling nuts allow for
Coaxial Connector Series
provides reliable, intermod-
ulation- minimizing solutions
that also provide a logical
alternative to N Series con-
nectors in high power appli-
cations where a more
Related Product Data
N Connectors —Pages 20-25
hand or wrench tightening
Application Notes —
White Bronze — Appendix B
Intermodulation — Appendix C
upon the application.
Tyco Electronics is a
rugged interface design is
required. Typical examples
of this include transmitter to
antenna links and channel
switching networks.
global ISO 9001 certified
manufacturer and maintains
a complete in-house
Between Series Adapters
For 7-16 Series Between Series
Adapters, see pages 251-260.
The increased customer
demand for greater channel
capacity combined with
increased sensitivity of
receivers has exposed the
IMD (Intermodulation
Distortion) phenomenon.
To address this problem
7-16 Connectors have been
Intermodulation Testing
facility. Connector part
numbers shown form just a
small part of the extensive
interconnect package that
Tyco Electronics offers for
the professional wireless
and telecom markets.
The 7-16 Series conforms to
CECC 22190 and IEC 169-4
specification standards and
has a 2.7kV working voltage
at the connector interface
and maximum power
handling capability of 4kW.
7
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
specified. Values in brackets
are standard equivalents.
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
7-16 Series Connectors (Continued)
General Specifications
Materials
Female Contacts (inner and outer)
Other Metal Parts
Insulators
Beryllium Copper
Brass
Fluorocarbon Polymer
Silicone Rubber
Gaskets
Finishes
Parts in the electrical path
Other Metal Parts
Silver over copper
White Bronze
Electrical
Frequency Range
DC-7GHz
50 Ohms
Impedance
Insulation Resistance
10,000 Megohms Minimum
2.7kV (connector)
Maximum Working Voltage rms (sea level)
Maximum Proof Voltage rms (sea level)
1.4kV (versions for RG 213, 214 and 393)
2.7kV (connector)
1.4kV (versions for RG 213, 214 and 393)
Center Contact Resistance
Insertion Loss
0.8 milliohm (max.) after conditioning
<1.5dB to 5 GHz
VSWR
1.02 + 0.03f up to 7 GHz
where f is measured in GHz
Intermodulation
Mechanical
Better than –150dBc
Coupling Torque
18.5 – 22 ft.-lbs.
25 ft.-lbs.
Proof Torque
Mechanical Endurance
Environmental
Temperature Rating
500 mating cycles
–55°C to +155°C
8
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
7-16 Series Connectors (Continued)
Straight Cable Plug
Solder/Solder
± 0.20
± .008
± 0.20
Ø 32.00
[1.260
Ø 16.50
[.650
Cable Type
Body Plating
White Bronze/
Gold
Part No.
± .008
]
]
1/2" Corrugated
1460159-1
23.50
[.925]
Typ.
4.50
[.177]
Typ.
± 0.50
50.35
[1.982
± .020
]
Straight Cable Plug
Crimp/Crimp
43.5
[1.71]
Cable Type
RG 8A/U, RG 213/U
RG 9B/U, RG 214/U
Body Plating
White Bronze
White Bronze
Part No.
6331959-1
6362765-1
32.0
[1.26]
Dia.
43.0
[1.69]
Right-Angle Cable Plug
Solder/Crimp
32.0
[1.26]
Dia.
34.3
[1.35]
36.0
[1.42]
Assembled
Cable Type
RG 58C/U, RG 141A/U
RG 213/U
Body Plating
White Bronze
White Bronze
White Bronze
Part No.
6408028-1
6408030-1
6312113-1
RG 214/U
36.0
[1.42]
43.0
[1.69]
32.0
[1.26]
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
9
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
7-16 Series Connectors (Continued)
Right-Angle Cable Plug
Solder/Clamp
43.0
[1.69]
Cable Type
Body Plating
White Bronze
Silver
Part No.
6408026-1
6328873-1
RG 55B/U, RG 58C/U,
RG 141A/U, RG 142B/U,
RG 223/U, RG 400/U
32.0
[1.26]
T-Flex 402
23.2
[0.91]
43.0
[1.69]
Cable Type
Body Plating
Part No.
RG 213/U, RG 214/U,
RG 393/U
RG 8A/U, RG 9B/U,
RG 213/U, RG 214/U
White Bronze
6408027-1
32.0
[1.26]
Dia.
White Bronze
6408038-1
47.2
[1.86]
Straight Panel Mount
Cable Jacks
Crimp/Crimp
46.5
[1.83]
Assembled
Mounting Detail
44.0
[1.73]
Cable Type
RG 8A/U, RG 213/U
RG 9B/U, RG 214/U
Body Plating
White Bronze
White Bronze
Part No.
6408032-1
6408033-1
17.2
[0.68]
5.00
[0.20]
24.8
[0.98]
24.8
[0.98]
3.70 Dia
[0.15] 4 Holes.
29.5
[1.16]
Dia.
Panel Socket Launcher
Mounting Detail
21.6
[0.85]
24.8
[0.98]
Body Plating
White Bronze
White Bronze
Part No.
6311225-1
1460052-2
24.8
[0.98]
5.00
[0.20]
3.70 Dia
[0.15] 4 Holes.
29.5
[1.16]
Dia.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
10
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
7-16 Series Connectors (Continued)
Right-Angle Panel Jack
Solder/Clamp
46.3
[1.82]
Mounting Detail
17.2
5.00
24.8
[0.68]
[0.20]
[0.98]
Cable Type
Body Plating
Part No.
RG 213/U, RG 214/U,
RG 393
White Bronze
6408036-1
24.8
[0.98]
RG 58C/U, RG 142B/U,
RG 223/U, RG 400/U
White Bronze
6363527-1
47.2
[1.86]
3.70 Dia
[0.15] 4 Holes.
29.5
[1.16]
Dia.
Combination Panel Jack
Solder/Crimp
46.3
[1.82]
Mounting Detail
24.8
17.2
5.00
[0.98]
[0.68]
[0.20]
Cable Type
Body Plating
Part No.
RG 55B/U, RG 142B/U,
RG 233/U, RG 400/U
RG 8A/U, RG 213/U
RG 9B/U, RG 214/U
24.8
[0.98]
White Bronze
6363524-1
34.2
[1.35]
White Bronze
White Bronze
6363525-1
6363526-1
36.7
[1.44]
Assembled
3.70 Dia
[0.15] 4 Holes.
29.5
[1.16]
Dia.
Bulkhead Adapter
Jack/Jack
49.0
[1.93]
33.0
[1.30]
14.0 Max
[0.55] Panel
Body Plating
White Bronze
Part No.
6408037-1
45.0
[1.77]
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
11
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Lightning and EMP Protection Devices
Product Facts
■ Cellular operator protection
against EMP (electro-
magnetic pulses) caused
by lightning strikes
■ Two different categories:
Surge protectors and
Quarter wave stub tuners
■ For use in cellular infra-
structure including GSM,
DCS 1800, and PCS 1900
systems
■ Incorporates Gas Discharge
Tube (GDT) technology
Tyco Electronics has devel-
oped a unique series of
Lightning and EMP protec-
tion devices for use in cellu-
lar infrastructure including
GSM, DCS 1800, and PCS
1900 systems. These
devices are designed to
offer the cellular operator
protection against EMP
(electro-magnetic pulses)
caused by lightning strikes.
Direct or even near strikes
produce fast rising electric
fields within micro-seconds.
These fields generate high
voltage pulses through
unprotected antennas and
transmission lines which
lead to the primary commu-
nication equipment. High
voltage pulses can cause
extensive damage leading
to costly repairs as well as
significant loss of service to
subscribers. These protec-
tive devices come in two
different categories: surge
interfere with parallel
porting structure as this,
when related to the typical
number of thunderstorms in
a particular region, allows
us to estimate the probabil-
ity of a direct strike taking
place. To assist our cus-
tomers in this, the following
table and chart has been
included in this note. This
should enable lightning pro-
tection planners to establish
the likelihood of direct
transmission lines within
protected electronic equip-
protectors and quarter wave ment, surge protector
stub tuners.
devices must be installed
with proper orientation.
The surge protector side
of the device should be
mounted in the unprotected
side of the equipment while
the mounting nut is posi-
tioned internally in the
protected area.
To ensure that proper, low
level contact resistance is
established between the LP
device and mounting wall, it
is recommended that a min-
imum torque of 50 in/lbs /
5.65 n/m be applied to
tighten the connector
mounting nut. A recom-
mended minimum torque of
35 in/lbs / 3.95 n/m should
also be applied for installa-
tion of replacement surge
protector capsules to
strikes across a network
anywhere in the world.
It is important when plan-
ning lightning protection,
that the user can estimate
the potential number of
direct strikes. This informa-
tion may influence the type
of device selected or the
requirement for routine
Detailed application notes
are available for proper
selection of lightning pro-
tection devices (surge pro-
tectors & stub tuners) as
well as intermodulation and
White Bronze plating.
ensure proper protection
performance.
maintenance checks.
Significant attention must be
paid to the height of sup-
In order to ensure that
resultant currents from light-
ning or EMP strikes do not
Selecting your RF Coaxial
Lightning Protection Device
Number of Thunderstorm
Days per year
hmax/m
10%
hmax/m
hmax/m
50%
20%
05
10
28
18
39
61
40
26
15
14
20
31
Between Series Adapters
20
12
17
26
For 7-16 Series and N Series Between
Series Adapters, please see pages
251-260.
30
9.4
7.9
6.9
5.6
4.8
3.9
3.5
3.1
13
20
40
11
17
50
9.5
8.0
7.0
5.5
5.0
4.4
15
70
12
90
10.6
8.5
7.7
6.9
130
150
180
Table 1: Maximum height of supporting building for a given number of thunderstorm days (when hmax is exceeded,
probability of direct strike to supporting building within 15 years is greater than 10% for hmax values given in second
column, 20% for hmax values given in third column and 50% for hmax values given in the fourth column).
12
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Surge Protectors
Product Facts
■ Excellent for Broadband
Frequency Applications
■ Field Replaceable Gas
Discharge Tube
■ Available Interfaces
Facilitate Retrofit
Capabilities
■ Low VSWR up to 2.5GHz
■ Specialized White Bronze
Finish
Advantages
■ Broadband
Selection of a Lightning
Protection Device
■ Allows DC bias on the transmission line.
(critical for applications using mast top
electronics.)
■ No harmonic passband
■ Ease of retrofitting antenna sights
■ GDT easily accessible for replacement
At right are the basic
advantages and limitations
for both types of protection
to use in the proper selec-
tion for your application.
Limitations
■ Routine maintenance recommended
■ 3 GHZ maximum frequency
■ Initial pass-through voltage
These devices incorporate Gas Discharge
Tube (GDT) technology. A GDT is a
hermetically sealed tube containing an
inert gas. The tube is inserted in the side
of the device through an easily accessible
weather sealed port. During normal
operation the tube is inactive. When an
installation is struck by lightning, a high
voltage impulse will appear on the coaxial
line. As the impulse amplitude rises, a level
is reached where the impulse surpasses
the dynamic voltage threshold of the tube
and the electrodes arc over to discharge
the energy to ground. Prior to activation of
In the case of the referenced chart,
the voltage will rise at one kilovolt per
microsecond and the tube will fire after 650
nanoseconds. During activation a small
percentage of voltage (called arc voltage)
will still pass through. This will be approxi-
mately 30 volts. When the pulse subsides,
the tube again becomes inactive leaving a
small residual voltage on the line. A direct
lightning strike results in an impulse current
of high amplitude. The capability of a device
to protect a system is defined as the
impulse discharge current rating. This is
defined as the peak current of an impulse
the tube, there will be a short period of time which the device can withstand ten times
where energy will be present on the line.
This residual pulse is equal to the dynamic
voltage threshold of the tube. The maxi-
mum impulse voltage a tube can handle
without discharging is referred to as the
impulse sparkover voltage. This capacity
of the GDT is quoted as follows:
(5 at each polarity at fixed intervals) without
affecting the device. maximum impulse
discharge current is the peak current of an
impulse the device can withstand once.
Surge protectors are often used in applica-
tions requiring a standing DC line voltage.
This is typical in applications with mast top
electronics. The maximum voltage capacity
of a surge protector prior to it surpassing
the static voltage threshold and discharg-
ing it to ground is defined as its D.C.
Typical
Characteristic Symbol Definition Impulse
Value
Impulse
sparkover
voltage
Dynamic
voltage
threshold
Uzdyn
1kV/µS 650V
13
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Surge Protectors (Continued)
sparkover voltage. This capacity is quoted
destruct. GDT’s have a finite life span which
is inversely proportional to the energy
dissipated. At extremes it is possible to
reach a level where the tube is unable to
discharge all the energy and is destroyed.
It is therefore necessary to schedule rou-
tine maintenance checks and periodically
replace the tube within the surge protector.
as follows:
Typical
Characteristic Symbol Definition Impulse
Value
d.c.
sparkover
voltage
Static
voltage
threshold
Uzstat
n/a
230V
In these applications it is important to
select a device that will assure the tube
can return to its inactive state after the
passage of a surge. This feature of the
Surge protector is known as the holdover
voltage. If the device continues to conduct,
the protected line will be short circuited
and the tube will heat up (glow mode). If
left in this state, the tube can overheat and
Surge protectors offer excellent lightning
protection for broadband systems and are
usable up to 3 GHz. Standard interfaces
include 7-16, N, and SMA. Configurations
include straight and bulkhead mounted
adapters which allows for ease of assimila-
tion into existing systems.
Specifications
Requirement
Detail
Electrical
Frequency Range
DC to 3GHz
50Ω
Impedance
VSWR Performance
Insertion Loss (Typical)
Impulse Discharge Current (8/20µs, multiple strike)
≤ 1.33:1
0.45dB
20kA
Maximum Impulse Discharge Current (8/20µs, single strike) 50kA
Dynamic Sparkover Voltage, NEMP (1kV/µs)
Dynamic Sparkover Voltage, LEMP (1kV/µs)
Dynamic Sparkover Voltage, Static (<100V/µs)
Materials
2,000V
800V
90V*
Body Parts
Brass
Gaskets
Silicone Rubber
Beryllium Copper
Brass
Female Contacts
Male Contacts
Insulators
P.T.F.E.
Environmental
Operating Temperature Range
Relative Humidity
-45° C to +85° C
up to 100%
* Determined by gas tube used, can be higher than value shown.
N Series Jack to SMA
Bulkhead Jack Adapter
53.8
[2.12]
Ref.
25.4
[1.00]
Sq.
21.5
[0.85]
Ref.
Frequency Range DC to 3GHz
Contact Plating Gold
16.0
[0.63]
Dia.
13.6
[0.54]
Body Plating
Max Panel
White Bronze
10.00mm
Compliant With CECC22210/
CEC22110
Coupling Torque 0.7-1.1Nm
14.0
[0.55]
Recommended
Mounting Hole
Proof Torque
Endurance
1.7Nm both ends
500 Matings
Part Number
6312079-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
14
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Surge Protectors (Continued)
N Series Jack to N Series
Bulkhead Jack Adapter
25.4
[1.00]
Sq.
53.8
[2.12]
Ref.
13.6
[.054]
16.0
[.063]
Dia.
Frequency Range DC to 3.0 GHz
Contact Plating Gold
Body Plating
Max Panel
White Bronze
10.00mm
Compliant With CECC22210
Coupling Torque 0.7-1.1 Nm
Recommended
Mounting Hole
Proof Torque
Endurance
1.7 Nm
500 Matings
Part Number
6312138-1
7-16 Plug to 7-16
Jack Adapter
56.5
[2.23]
Ref.
31.9
[1.25]
Frequency Range DC to 3.0 GHz
Contact Plating Silver
Body Plating
White Bronze
Compliant With CECC22190
Coupling Torque 25 - 30 Nm
34.0
[1.34]
Dia. Ref.
Proof Torque
Endurance
35Nm
500 Matings
Part Number
6312121-1
d.c. Sparkover Voltage:
Impulse Sparkover Voltage:
(1kV/mS)
230V 46V
700V typ.
(900V max)
Gas Discharge Tube
Replacement
Glow Discharge Voltage:
Arc Discharge Voltage:
a.c. Discharge Current:
(1 sec, 50Hz)
72V
10V
20A
Part Number
1402314-1
Impulse Discharge Current:
(8/20mS waveform)
20kA (50kA for
one strike)
Insulation Resistance (@100V): 10GW
Capacitance: 2pF
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
15
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
λ/4 Stub Tuners
Product Facts
■ Ideal for use with GSM,
PCS and DCS
■ Maintenance Free Operation
■ Low VSWR Within Specified
Bandwidth
■ Configurations include
direct attachments to Cable
variants
■ Optional White Bronze
Finish
Advantages
■ Low VSWR in pass-
band
■ Minimal maintenance
■ Pass-through voltage
eliminated
■ No sparkover or resid-
ual voltage concerns
■ Ease of retro-fitting
antenna sights
These devices are three port
Stub tuners are classified
frequencies with standard
industry interfaces includ-
coaxial connectors. The third into two broad categories—
port extending from the main simple and broadband. The ing SMA, 7-16, and Type N.
through path is terminated in
a short circuit at a pre-deter-
mined distance calculated to VSWR vs. frequency plot.
be exactly one quarter wave- The trough of the V is
length at the desired center
frequency (see graph).
simple stub tuner exhibits a
V-shaped response on the
Configurations include
cable assemblies, cabled
connectors, and adapters
for ease of assimilation into
existing systems. Stub
designed to occur at the
required Fo and the band-
width is restricted to approx- since they incorporate no
imately 8%. The broadband
tuner employs extra RF tech- it is recommended that a
tuners are maintenance free
Unlike surge protectors, this
design eliminates concerns
about residual pulse,
sparkover voltage and resid-
ual voltage ensuring greater
protection for sensitive
electronic equipment. As
opposed to surge protec-
tors, stub tuners will absorb
lightning strikes without
need for replacing compo-
nents. These devices yield
very low VSWR and feature
high attenuation within a rel-
atively narrow pass-band
(+/- 70 MHz) but are appli-
cation specific. Stub tuners
also pass energy in bands
that are harmonically related
to the fundamental center
frequency. The graphs
active components though
Limitations
■ Frequency specific
■ Harmonic passband
■ Does not allow DC bias
on transmission line
niques, similar to multiple
cavity filtering, which
increase the effective band-
check of the stub tuner
affixment be made following
heavy discharges at an
width by approximately 20%. installation.
Tyco Electronics offers a
wide variety of stub tuners
for the most popular fre-
quency bands to facilitate
purchase without need for
custom design and manu-
facturing. Designs exist for
GSM, PCS 1900, DCS 1800
Typical Test Impulse
V
1.0
1.9
0.5
0.3
t
0
0
T
1
T
= 1.67T
1
T
T
2
1
Typical λ/4 Test Response
326.400 110.308
V
kA
244.800 94.5588
kA
V
below show a typical test
impulse and the response of
a stub tuner.
163.200 78.8088
kA
V
-640.0nS, 80.033280 V
10.98uS, 49.45920kA
81.6000 63.0588
V
kA
0.0
uV
47.3088
kA
λ/4 Shorting Stub Basics
-81.600 31.5588
kA
V
-163.20 15.8088
V
kA
l
i
V
i
-244.80
V
58.80
A
V
r
l
r
-326.40 -15.691
kA
V
0.0nS
0.0nS
20.00uS
20.00uS
40.00uS
40.00uS
60.00uS
60.00uS
80.00uS
80.00uS
16
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
λ/4 Stub Tuners (Continued)
Requirement
Detail (Type-N, 7-16)
Electrical
Impedance
50Ω
VSWR Performance in Band
Insertion Loss (Typical)
DC Resistance (stub outer to inner)
Dynamic Voltage @ 250A/ms
Residual Voltage @ 2500A, 8/20µs
Outer Conductor Contact Resistance
≤1.2:1
0.2dB
1mΩ
≤15V
≤15V
10mΩ
DC Resistance (through-path center contact) 100mΩ
Materials
Body parts
Brass
Gasket
Silicone Rubber
Beryllium Copper
Brass
Female contacts
Male Contacts
Insulators
P.T.F.E.
Environmental
Operating temperature range
Relative humidity (non-condensing)
-45°C to +85°C
up to 100%
DCS 1800
25.4
[1.00]
Sq.
62.9
[2.48]
Bandwidth
70 MHz
Ref.
Type N Clamp
Bulkhead Jack
13.6
23.5
[0.92]
Ref.
[0.54]
Center Frequency 1795 MHz
Contact Plating Silver
Body Plating
Max Panel
Compliant With CECC22210
Coupling Torque 0.7-1.1Nm
Silver
10.00mm
54.7
[2.15]
Ref.
16.0
[0.63]
42.0
Dia.
[1.65]
Ref.
Recommended
Mounting Hole
Proof Torque
Endurance
1.7Nm
500 Matings
Cable
Part No.
T-Flex402
6329818-1
77.6
[3.06]
44.9 Dia.
[1.77] Ref.
Bandwidth
Center Frequency 1795 MHz
Contact Plating Silver
Body Plating
Max Panel
Compliant With CECC22190
Coupling Torque 25 - 30Nm
70 MHz
7-16 Jack to 7-16
Bulkhead Jack Adapter
Ref.
30.5
[1.20]
17.5
[0.69]
White Bronze
8.00mm
67.0
[2.64]
Ref.
44.6
[1.76]
Ref.
3.20
[0.13]
Proof Torque
Endurance
35Nm
500 Matings
Recommended
Mounting Hole
Part Number
6361137-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
17
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
λ/4 Stub Tuners (Continued)
DCS 1800 (Continued)
62.9
[2.48]
Ref.
Bandwidth
Center Frequency 1795 MHz
Contact Plating Silver
70 MHz
Type N Crimp
Bulkhead Jack
25.4
[1.00]
Sq.
23.5
[0.92]
Ref.
13.6
[0.54]
Body Plating
Max Panel
Compliant With CECC22210
Coupling Torque 0.7-1.1Nm
Silver
10.00mm
54.7
[2.15]
Ref.
16.0
[0.63]
Dia.
42.0
[1.65]
Ref.
Proof Torque
Endurance
1.7Nm
500 Matings
Recommended
Mounting Hole
Cable
Part No.
RG58C/U
1329819-1
57.3
[2.26]
Bandwidth
Center Frequency 1795 MHz
Contact Plating Silver
Body Plating
Max Panel
70 MHz
Type N Jack to Type N
Bulkhead Jack Adapter
Ref.
25.4
[1.00]
Sq.
23.5
[0.93]
Ref.
13.6
[0.54]
10.0
[0.39]
Silver
10.00mm
Compliant With CECC22210
Coupling Torque 0.7-1.1Nm
54.7
[2.15]
Ref.
16.0
[0.63]
42.0
[1.65]
Ref.
Dia.
Proof Torque
Endurance
1.7Nm
500 Matings
Recommended
Mounting Hole
Part Number
1361138-1
GSM
77.6
[3.06]
44.9 Dia.
[1.77] Ref.
Bandwidth
Center Frequency 925 MHz
Contact Plating Silver
70 MHz
7-16 Bulkhead Jack to
7-16 Bulkhead Jack
Ref.
27.4
[10.8]
Ref.
30.5
[1.20]
Dia.
Body Plating
Max Panel
Compliant With CECC22190
Coupling Torque 25 - 30Nm
White Bronze
8.00mm
93.4
[3.68]
Ref.
71.0
17.5
[0.69]
[2.79]
Ref.
Proof Torque
Endurance
35Nm
500 Matings
Recommended
Mounting Hole
Cable
Part No.
T-Flex 402 Cable 6408399-1
PCS 1900
62.9
[2.48]
25.4
[1.00]
Sq.
Bandwidth
Center Frequency 1920 MHz
Contact Plating Silver
70 MHz
Ref.
Type N Clamp
Bulkhead Jack
13.6
[0.54]
23.5
[0.92]
Ref.
Body Plating
Max Panel
Compliant With CECC22210
Coupling Torque 0.7-1.1Nm
Silver
10.00mm
52.9
[2.08]
Ref.
16.0
[0.63]
40.2
Dia.
[1.58]
Ref.
Recommended Proof Torque
1.7Nm
500 Matings
Mounting Hole
Endurance
Cable
Part No.
T-Flex 402
1312137-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
18
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
λ/4 Stub Tuners (Continued)
62.9
[2.48]
25.4
[1.00]
Sq.
Bandwidth
Center Frequency 1920 MHz
Contact Plating Silver
Body Plating
Max Panel
Compliant With CECC22210
Coupling Torque 0.7-1.1Nm
70 MHz
Ref.
PCS 1900 (Continued)
13.6
[0.54]
23.5
[0.92]
Type N Crimp
Bulkhead Jack
Silver
10.00mm
52.9
[2.08]
Ref.
16.0
[0.63]
40.2
[1.58]
Ref.
Dia.
Recommended
Mounting Hole
Proof Torque
Endurance
1.7Nm
500 Matings
Cable
Part No.
RG58 C/U
6312139-1
72.7
[2.86]
Bandwidth
Center Frequency 70 MHz
Contact Plating Silver
Body Plating
Max Panel
1920 MHz
7-16 Clamp Bulkhead Jack
Ref.
38.0
[1.50]
Dia.
Ref.
27.5
[1.08]
29.5
24.6
[0.97]
Ref.
4.00
[0.16]
27.4
[1.08]
Ref.
Ref.
Dia.
[1.16]
Silver
8.00mm
Compliant With CECC 22190
Coupling Torque 25-30 Nm
40.2
[1.58]
Ref.
Proof Torque
Endurance
35 Nm
500 Matings
Recommended
Mounting Hole
Cable
T-Flex402
Part No.
6312123-1
44.9
[1.77]
Dia.
Ref.
77.6
[3.06]
Bandwidth
Center Frequency 70 MHz
Contact Plating Silver
Body Plating
Max Panel
Compliant With CECC 22190
Coupling Torque 25-30 Nm
1920 MHz
7-16 Bulkhead Jack to
7-16 Bulkhead Jack Adapter
30.5
[1.20]
Ref.
17.5
[0.69]
White Bronze
8.00mm
64.6
[2.54]
Ref.
42.2
[1.66]
Ref.
Proof Torque
Endurance
35 Nm
500 Matings
Recommended
Mounting Hole
Part Number
6312124-1
25.4
[1.00]
Sq.
Bandwidth
Center Frequency 1920 MHz
Contact Plating Silver
Body Plating
Max Panel
Compliant With CECC22210
Coupling Torque 0.7-1.1Nm
70 MHz
Type N Bulkhead Jack to
Type N Bulkhead
Jack Adapter
57.3
[2.26]
Ref.
16.0
[0.63]
Dia.
13.6
[0.54]
Silver
10.00mm
52.7
[2.08]
Ref.
Recommended
Mounting Hole
40.0
[1.58]
Ref.
Proof Torque
Endurance
1.7Nm
500 Matings
Part Number
6361139-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
19
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
N Series Connectors
The Tyco Electronics
Product Facts
N Connector, featuring a
15.88 [5/8] - 24 threaded
coupling for optimum
■ Designated connectors are
MIL-C-39012, Class II,
Category B qualified
stability, is highly suited for
critical applications and
environments. This medium
sized connector can with-
stand shock and vibration to
assure a low noise level and
has a constant impedance
of 50 ohms. It also features
a captive center contact
and provides excellent per-
formance at frequencies up
to 11 GHz, with voltages to
1000 volts rms.
■ Captive center contacts
■ Completely crimpable
application – one hand tool
crimps all cables with
single or double braided
shields of a given size
■ Impedance matching crimps
■ Broad band performance –
low VSWR
■ Superior cable retention
■ TEFLON dielectric
This Tyco Electronics con-
nector offers the added
benefits of low overall
■ Silver or nickel finish
■ Fully intermateable with
MIL-C-39012 connectors
Electrical Characteristics
Mechanical Characteristics
applied cost with a labor-
saving two-crimp assembly.
The contact is simply
Nominal Impedance —50 ohms
Working Voltage—1000 volts, rms
at sea level
Frequency Range— 0 to 11 GHz
Voltage Standing Wave Ratio
(VSWR) —
Straight Plug or Jack — 1.3:1 max.
Right-Angle Plug —
Mating/Unmating —Threaded cou-
■ Listed under the Component
Program of Underwriters
Laboratories Inc.,
pling
crimped to the cable’s
Cable Attachment—Crimp type -
center contact and braid
Coupling Nut Retention —445 N
[100 lbs.] min.
Cable Retention —400 N [90 lbs.]
min. RG 214/U Cable
center conductor, then both
braid and cable support are
simultaneously crimped to
complete the termination.
R
File No. E81956
■ Recognized under the
Component Program of
Underwriters
N Series Connectors are
available in standard plug,
jack, panel jack, bulkhead
jack and right-angle plug
configurations. Those
connectors with a military
designation (M39012) are
furnished in accordance with
all requirements of specifica-
tion MIL-C-39012, Class II,
Category B.
R
1.35 max. at 0 to 9.0 GHz
1.50 max. at 9.0 to 11.0 GHz
Laboratories Inc.,
Durability—500 cycles per MIL-C-
39012
File No. E81956
Contact Resistance —
Captive Contact —27 N [6 lbs.] min.
■ Certified by Canadian
Outer Contact—0.2 milliohms
Center Contact—1.0 milliohms
Right-Angle—2.5 milliohms
axial retention, either direction
Standards
Association
R
Environmental Characteristics
File No. LR 7189
Insulation Resistance —5000
megohms min.
Dielectric Withstanding Voltage—
2500 Volts, rms at sea level
RF Leakage—MIL Type, -90 dB min.
at 2 to 3 GHz
RF Insertion Loss — MIL Type, 0.15
dB max. at 10 GHz
Right-Angle Plug, 0.3 dB max. at
10 GHz
Corona Level—MIL Type, 500 volts
min. at 21 336 m [70,000 ft.]
Terminator—
Resistance—50 ohms 1ꢀ
Power Rating—1.0 watt max.
Temperature Range —
MIL Type, -65°C to +165°C
Commercial, -55°C to +85°C
Vibration — MIL-STD-202, Method
204, Test Cond. B
Shock —MIL-STD-202, Method 213,
Test Cond. I
Moisture Resistance —MIL-STD-
202 Method 106
Salt Spray — MIL-STD-202, Method
101, Test Cond B
Temperature Cycling —MIL-STD-
202, Method 107, Test Cond. B
(except high temperature is +85°C)
Materials
Brass —QQ-B-626
Beryllium Copper —QQ-C-530
Dielectric —TEFLON
TEFLON—MIL-P-19468
Copper, Annealed—QQ-C-576
Phosphor Bronze —QQ-B-750
Silicone Rubber —ZZ-R-765
Note: All data pertains to use with MIL-C-
Between Series Adapters
For N Series Between Series Adapters,
see pages 251-260.
39012 specified cables only.
Plating
Body—
Silver per QQ-S-365
Nickel per QQ-N-290
Center Contact —
Gold per MIL-B-45204
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
20
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
specified. Values in brackets
are standard equivalents.
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
N Series Connectors, 50 Ohm (Continued)
Plugs
MIL Type
Dual Crimp
Semi-Rigid Cable
Hex
Dual Crimp
19.05 Dia.
[.750] Max.
21.01 Dia.
[.827] Max.
21.01 Dia.
[.827] Max.
L
Max.
L
Max.
L
Max.
M39012/
Hex Across Flats
RG/U
Cable
Termination
Body
Dim.
L
Integral Die
Military No. and/
or Comments
Notes
Part No.
Type
Plating
Hand Tool
220045-2
220045-2
220045-2
220045-2
220045-2
220045-2
220045-2
58436-1
Center
Braid
42.85
1.687
O Crimp
O Crimp
O Crimp
O Crimp
Nickel
Silver
Nickel
Silver
Knurl Collar
Knurl Collar
Knurl Collar
Knurl Collar
Knurl Collar
Knurl Collar
Knurl Collar
Knurl Collar
—
—
1
1
1-5225661-2
5225361-1
1-5225661-3
5225361-2
5225392-2
5225361-4
5225699-1
5415232-4
58, 58A,
58B, 58C
42.85
1.687
—
—
—
—
—
—
—
—
—
—
—
—
42.85
1.687
1
223,
55, 55A, 55B
42.85
1.687
1
42.85
1.687
1, 3
1
142, 142A
142B, 400
O Crimp
Silver
42.85
1.687
41.35
1.628
O Crimp
Nickel
Nickel
3
142, 142A
142B
39.40
1.550
1.73
.068
5.41
.213
Hex Crimp
2
115A,
BELDEN 89880,
9880
42.85
1.687
O Crimp
Nickel
Knurl Collar
220015-1
—
—
3
5225092-8
39.40
2.54
10.90
BELDEN 9880
Hex Crimp
Solder
Nickel
Nickel
Nickel
Nickel
Nickel
Silver
Nickel
Silver
Nickel
Nickel
Nickel
Nickel
Silver
Nickel
Silver
Knurl Collar
Knurl Collar
Knurl Collar
Knurl Collar
Knurl Collar
58485-1
—
2
—
—
—
—
3
1-415232-0
6057088-1
6057094-1
1-5227086-0
5225661-2
51692-2
1.550
.100
.429
402 Semi Rigid
(.141)
24.6
.970
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
405 Semi Rigid
(.085)
24.6
.970
Solder
—
42.85
1.687
O Crimp
O Crimp
O Crimp
O Crimp
O Crimp
O Crimp
Hex Crimp
O Crimp
O Crimp
O Crimp
Hex Crimp
Hex/Solder
220015-1
220015-1
220015-1
220015-1
220015-1
220015-1
58485-2
220015-1
220015-1
220015-1
58485-1
—
42.85
1.687
8, 8A, 213
01B0007
Knurl Collar
42.85
1.687
47.22
1.859
Knurl Collar
3
5225662-2
51692-4
01B0013
Knurl Collar
42.85
1.687
11, 11A, 216
BELDEN 9292
393
3
47.22
1.859
—
3
1-5225662-8
5414160-5
1-5225661-6
5225661-1
51692-1
39.40
1.550
3.25
.128
10.90
.429
Hex Collar
Knurl Collar
Knurl Collar
2
42.85
1.687
BELDEN 8214
—
—
—
—
—
—
—
—
3
42.85
1.687
9, 9A, 9B,
214
01B0008
Knurl Collar
42.85
1.687
39.40
1.550
2.54
.100
10.90
.429
9, 214
Hex Collar
Hex Collar
2
5415232-7
6274532-1
29.74
1.171
6.81
.268
LMR 240
—
—
Notes: 1 Hand Tool 69710-1, with Die Insert 220062-1, is available to terminate these connectors. The 626 Pneumatic tool system can also be used.
2 Die Set Crimp Tool — PRO-CRIMPER II Hand Tool, P/N 354940-1 or 626 Series Pneumatic Tool with 679304-1.
3 Weatherproof.
BELDEN is a trademark of Belden Wire
and Cable Company.
Note: Part Numbers are RoHS compliant except:ꢀ Indicates non-RoHS compliant.
21
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
N Series Connectors, 50 Ohm (Continued)
35.86
[1.412]
Max.
Right-Angle Plugs,
Crimp
L
Max.
21.01 Dia.
[.827] Max.
M39012/
Military No. and/
or Comments
Hex Across Flats
RG/U
Cable
Termination
Body
Plating
Dim.
L
Integral Die
Hand Tool
Notes
Part No.
Type
Center
Braid
57.79
1.73
5.41
58A, 58C
Hex Crimp
Hex Crimp
O Crimp
O Crimp
Hex Crimp
O Crimp
O Crimp
O Crimp
Hex Crimp
Nickel
Nickel
Nickel
Silver
Nickel
Silver
Nickel
Silver
Nickel
Hex Collar
Hex Collar
Knurl Collar
58436-1
58436-1
1
1
5415255-1
5415255-2
5225669-2
225014-2
5415255-3
225389-6
5225669-1
225014-3
5415255-4
2.275
.068
.213
142, 142A,
142B
57.79
2.275
1.73
.068
5.41
.213
57.79
2.275
220015-1
220015-1
58485-1
—
—
—
—
—
—
1
8, 8A, 213
05B0002
Knurl Collar
57.79
2.275
57.79
2.275
2.54
.100
10.90
.429
8, 213
393
Hex Collar
Knurl Collar
Knurl Collar
62.31
2.453
220015-1
220015-1
220015-1
58485-1
—
—
—
—
—
—
1,3
—
—
1
57.79
2.275
9, 9A, 9B
214
05B0003
Knurl Collar
57.79
2.275
57.79
2.275
2.54
.100
10.90
.429
9, 214
Hex Collar
Notes: 1 Die Assembly compatible with Crimp Tool — PRO-CRIMPER III Hand Tool, P/N 354940-1, 626 Series Pneumatic Tool 1213855-1, SDE Battery Tool Kit
1725837-1, or SDE Electric Terminator 1490076-2.
3 Weatherproof.
Jacks
L
Max.
15.93 Dia.
[.627] Max.
M39012/
Military No. and/
or Comments
Hex Across Flats
RG/U
Cable
Termination
Type
Body
Plating
Dim.
L
Integral Die
Hand Tool
Notes
Part No.
Center
Braid
44.83
58A, 58C
O Crimp
Hex Crimp
O Crimp
O Crimp
O Crimp
O Crimp
Hex Crimp
Solder
Nickel
Nickel
Silver
Nickel
Silver
Nickel
Nickel
Nickel
—
220045-2
58436-1
220015-1
220015-1
220015-1
220015-1
58485-1
—
—
—
2, 3
2
1-5225664-2
5415242-2
225093-2
1.765
142, 142A,
142B
41.28
1.625
1.73
.068
5.41
.213
—
02B0008
—
8, 8A,
213
49.20
1.937
—
—
—
—
—
—
—
—
3
49.20
1.937
8, 213
2, 3
—
2, 3
2
5225664-2
225093-1
9, 9A, 9B,
214
49.20
1.937
02B0009
—
49.20
1.937
9, 214
393
5225664-1
5415242-6
6057116-1
41.28
1.625
2.54
.100
10.90
.429
—
402 Semi
Rigid (.141)
26.70
1.051
—
—
—
—
Notes: 1 Hand Tool 69710-1, with Die Insert 220062-1, is available to terminate these connectors. The 626 Pneumatic tool system can also be used.
2 Die Assembly compatible with Crimp Tool — PRO-CRIMPER III Hand Tool, P/N 354940-1, 626 Series Pneumatic Tool 1213855-1, SDE Battery Tool Kit
1725837-1, or SDE Electric Terminator 1490076-2.
3 Weatherproof.
Note: Part Numbers are RoHS compliant except:ꢀ Indicates non-RoHS compliant.
22
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
N Series Connectors, 50 Ohm (Continued)
16/16.38
[.630/.645]
Dia.
Bulkhead Jacks,
Crimp
13.51/13.79
[.532/.543]
L
Max.
22.48 Dia.
[.885] Max.
Maximum Panel Thickness 6.35 [.250]
Recommended Panel Cutout
Hex Across Flats
RG/U
Cable
Termination
Type
Body
Plating
Dim.
L
Integral Die
Hand Tool
Notes
Part No.
Center
Braid
58, 58A, 58B,
58C, LMR195
49.61
O Crimp
Hex Crimp
Hex Crimp
Silver
220045-2
58436-1
58436-1
—
—
1
2
2
5225363-1
5415248-1
5415248-7
1.953
45.72
1.800
1.73
.068
5.41
.213
58A, 58C
Nickel
Nickel
142, 142A,
142B
45.72
1.800
1.73
.068
5.41
.213
124, 140, 210, 62,
62A, 62B, 59, 59A,
59B, BELDEN 9291,
9209, 9269, 89269
49.61
1.953
O Crimp
Nickel
220045-3
—
—
—
1-5225667-6
53.98
8, 213
393
O Crimp
O Crimp
O Crimp
Silver
Nickel
Silver
220015-1
220015-1
220015-1
—
—
—
—
—
—
2, 3
2, 3
2, 3
225094-2
1-225668-1
225094-1
2.125
53.98
2.125
53.98
2.125
9, 214
Notes: 1 Hand Tool 69710-1, with Die Insert 220062-1, is available to terminate these connectors. The 626 Pneumatic tool system can also be used.
2 Die Assembly compatible with Crimp Tool — PRO-CRIMPER III Hand Tool, P/N 354940-1, 626 Series Pneumatic Tool 1213855-1, SDE Battery Tool Kit
1725837-1, or SDE Electric Terminator 1490076-2.
3 Weatherproof.
16.26 +0.13
12.88 +0.08
-0.25
-0.05
Bulkhead Jacks for
Semi-Rigid Cable
Dia.
Dia.
+.005
[.640
+.003
[.507
]
]
Front Mount
-.010
-.002
Rear Mount
5.59 +0.03
-0.05
13.72 +0.08
[.220 +.001
]
-0.2
-.002
+.003
[.540
]
-.008
L
Max.
16.1 Dia.
Maximum Panel Thickness 6.35 [.250]
Maximum Panel Thickness 6.35 [.250]
[.630] Max.
L
Max.
Recommended Panel Cutout
Recommended Panel Cutout
22.86 Dia.
[.900] Max.
M39012/
RG/U
Cable
Termination
Type
Body
Plating
Military No.
and/or
Dim.
L
Integral Die
Hand Tool
Part No.
Comments
29.37
Crimp
Solder
Solder
Solder
Nickel
Pass. Gold
Nickel
Rear Mount
Rear Mount
Rear Mount
Rear Mount
*
228658-1
6057159-1
6057176-1
6057165-1
1.156
402
—
*
Semi-Rigid/.141
25.4
1.00
—
—
405
33.9
1.335
Nickel
Semi-Rigid/.085
*Tooling—Hand Tool No. 59980-1, Requires (2) Crimping Dies No. 312253-1 and (1) Locator No. 220220-2.
BELDEN is a trademark of Belden Wire
and Cable Company.
Note: Part Numbers are RoHS compliant except:ꢀ Indicates non-RoHS compliant.
23
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
N Series Connectors, 50 Ohm (Continued)
Jack, Panel Mount
16.25 Dia.
[.640] Min.
25.40
[1.000]
± .013
18.24
[.718
± .005
]
± .013
18.24
[.718
L
± .005
]
Max.
3.17 [.125] Dia.
(4 Holes) Min.
Recommended
Panel Cutout
Hex Across Flats
RG/U
Cable
Termination
Type
Body
Plating
Dim.
L
Integral Die
Hand Tool
Notes
Part No.
Center
Braid
41.28
1.73
5.41
58A, 58C
Hex Crimp
Hex Crimp
Hex Crimp
Hex Crimp
O Crimp
Nickel
Nickel
Nickel
Nickel
Silver
58436-1
58436-1
58485-1
58485-1
220015-1
—
—
—
—
3
5415252-1
5415252-2
5415252-3
5415252-4
5225089-4
1.625
.068
.213
142, 142A,
142B
41.28
1.625
1.73
.068
5.41
.213
41.28
1.625
2.54
.100
10.90
.429
8, 213
9, 214
41.28
1.625
2.54
.100
10.90
.429
49.20
1.937
RG 225
—
—
Note: 3 Weatherproof.
25.0
[.986]
25.4
Sq.
Panel Jacks, Solder
[1.000]
18.7
18.2
[.718]
Typ.
[.736]
Body Plating
Nickel
Part No.
1057284-1
1057290-1*
2.0
[.080]
3.0
[.120]
Dia.
Nickel
*No solder cup — dielectric protrudes.
2.5
[.098]
Dia.
9.6
[.377]
Ref.
Ø 3.2 Dia.
[.125] 4 Plcs.
27.2
[1.070]
Panel Plug, Solder
25.4
[1.000]
Sq.
20.8
[.819]
18.2
[.718]
Typ.
2.0
[.080]
Body Plating
Nickel
Part No.
Ø 3.0
[.120]
1057275-1
1057279-1*
1057277-1*
Nickel
Nickel
*No solder cup — dielectric protrudes.
Ø 2.5
[.098]
Ø 3.2
[.125]
4 Plcs.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
24
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
N Series Connectors, 50 Ohm (Continued)
Panel Mount Jack,
Press-Fit
± 0.20
5.15
[.203
± .008
]
+ 0.09
– 0.05
+ .004
– .002
± 0.10
± .004
2.50
[.098
9.10
Body
]
Contact
Dielectric
Part No.
[.358
]
Plating
± 0.05
Ø 14.35
[.565
± .002
White bronze
Gold
PTFE
1460055-1
]
± 0.10
Ø 15.80
[.622
5/8-24
UNEF-2A
± .004
]
± 0.30
± .012
8.70
[.343
± 0.10
6.00
[.236
]
± .004
]
± 0.20
24.80
[.976
± .008
]
Panel Mount Jack,
Screw-In
Body
Plating
± 0.10
Ø 14.90
[.587
Contact
Dielectric
Part No.
± .004
]
White bronze
White bronze
White bronze
Gold
Gold
Gold
PTFE
PTFE
PTFE
1460118-11
1460118-22
1460118-33
5/8-24
UNEF-2A
M16 x 1
Notes: 1. Without TUF-LOC Adhesive
2. With TUF-LOC Adhesive around M3 thread
3. With TUF-LOC Spot on M3 thread
± 0.10
± .004
± 0.20
5.00
[.197
16.30
[.642
± 0.10
19.00
[.748
± .008
]
]
± 0.20
23.30
[.917
± .004
]
± .008
]
Hex.
Feedthru Jack Adapter
(Jack-Jack)
Plating
Body — Nickel
Part Number
227945-2
Dielectric — General purpose
polypropylene
45.22
[1.780]
Max.
Contact — Gold plated
15.93 Dia.
[.627] Max.
50.69
[1.996]
Inter-Series Adapters
Jack-Plug
Body
Type
Jack-Plug
Contact
Dielectric
Part No.
Plating
Stainless steel/
passivate
Gold
TEFLON
1057374-1
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
25
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Quick Lock N (QLN) Series Connectors
Product Facts
■ Similar performance and
applications to standard
N Series
■ Time saving and user
friendly snap on/off mating
■ Excellent performance to
6 GHz
■ No torquing of connector
required
■ Free rotation of mated
connection
■ Higher packaging density
can be achieved
■ Fully compatible with
Huber&Suhner and Radiall
QN Series QLF® connectors*
Description
Material and Finish
Shell — Brass, plated white bronze
Male Pin Center Contact — Brass,
plated gold
Female Socket Center Contact —
Beryllium copper, plated gold
Outer Contact — Phosphor bronze,
plated white bronze
Electrical Characteristics
Characteristic Impedance —
50 ohms
Mechanical Characteristics
Engagement Force — 30 N typical
Disengagement Force — 30 N typical
Interface Retention Force —
450 N min.
Contact Captivation — 28 N min.
Durability — 100 cycles min.
Snap-on version of the pop-
ular N Series connector
■ Snap-on interface
facilitates assembly
■ Same dependable
performance as standard
N connector
Frequency Range — DC to 6 GHz
Voltage Standing Wave Ratio
(VSWR) —
1.12 max. DC to 3 GHz
Insertion Loss —
0.15 dB max. DC to 3 GHz
Rated Voltage — 1000 VAC rms,
50 Hz (at sea level)
Insulation Resistance —
5000 megohms min.
Insulators — PTFE or PFA
Environmental Characteristics
Operating Temperature —
–40°C to +125°C (cable dependent)
Thermal Shock —
IEC 60169 para. 16.4
Corrosion — MIL-STD-202, Method
101, Condition B
Vibration — IEC-1169-1 para. 9.3.3
(10-500 Hz, 5g)
IP Rating for Interface —
IP68 (connector dependent)
Applications
■ Cellular & PCS Base
Stations
■ Broadcast equipment
■ Telephony applications,
WLAN
■ Instrumentation and
remote measuring
equipment
Contact Resistance —
Center Contact — 1.5 milliohms max.
Outer Contact — 1.5 milliohms max.
■ Mil Aero, SatCom, Radar
Related Product Data
Internet — http://tycoelectronics.com/products/rfcoax
Product Specification/Design Objectives —
108-2281
* QN and QLF are registered trademarks of Huber&Suhner, Inc. and Radiall S.A..
Huber&Suhner, Inc. and Radiall S.A. are not affiliated with the QLN product.
26
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Quick Lock N (QLN) Series Connectors (Continued)
Semi-Rigid Cable —
Direct Solder Attachment
34.29
Ref.
[1.35]
Straight Cable Plug
Cable
Part No.
RG 402
1274805-1
38.10
Ref.
Bulkhead Cable Jack
[1.50]
Cable
Part No.
RG 402
1274806-1
Flexible Cable —
Crimp Attachment
30.48
Ref.
[1.20]
Straight Cable Plug
Cable
RG 58
Part No.
1274688-1
1274688-2
1274688-3
RG 142
LMR 240
26.92
Ref.
Straight Cable Jack
[1.06]
Cable
RG 58
Part No.
1274689-1
1274689-2
1274689-3
RG 142
LMR 240
36.58
Ref.
Right-Angle Cable Plug
[1.44]
Cable
RG 58
Part No.
1274804-1
1274804-2
1274804-3
RG 142
LMR 240
34.54
Ref.
Bulkhead Cable Jack
[1.36]
Cable
RG 58
Part No.
1274734-1
1274734-2
1274734-3
RG 142
LMR 240
34.54
Ref.
4-Hole Square Flange
Cable Jack
[1.36]
Cable
RG 58
Part No.
1274735-1
1274735-2
1274735-3
RG 142
LMR 240
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
27
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Quick Lock N (QLN) Series Connectors (Continued)
Panel Mount Receptacles
Press-Fit Bulkhead Jack
Receptacle — Solder Terminal
Ø 15.24
[.600]
Ref.
20.07
[.790]
Ref.
Part Number
1274807-1
24.89
[.980]
4-Hole Flange Jack
Receptacle — Solder Terminal
Ref.
17.53 Sq.
[.690] Ref.
20.07
[.790]
Ref.
Part Number
1274662-1
Adapters — Between Series
QLN Plug to N Series Jack
41.91
[1.65]
Ref.
Part Number
1274808-1
Ø 18.42
[.725]
Ref.
N Series Jack
QLN Plug
9.53
[.375]
Wrench Flats
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
28
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
TNC Connectors
The Tyco Electronics
Product Facts
TNC RF connector family,
with 7/16-28 threaded cou-
plings, provides low noise
levels and optimum stability,
and can withstand the
shock and vibration often
present in hostile environ-
ments.
Hex Crimp and O Crimp
Connectors
■ 50 and 75 ohm commercial
versions available
■ Provides excellent perfor-
mance at frequencies up
to 7 GHz
Available in both 50 and
75 ohm versions, these
connectors feature numer-
ous styles including cable
plugs and jacks, adapters
and printed circuit board
connectors. These connec-
tors accept a wide range of
coaxial cables and are
intermateable with industry
standard connectors
■ Low cost commercial type
available
■ Commercial type is smaller
and lighter weight
■ Tarnish resistant nickel
finish
■ Choice of dielectric
materials
■ Standard and weatherproof
versions available
designed to MIL-C-39012
specifications.
■ Plugs available for high
temperature cable
Single crimp connectors
provide reduced applica-
tion time and lower applied
costs. This is accomplished
by using Tyco Electronics
one-crimp operation tooling
which simultaneously termi-
nates the inner conductor,
outer braid and cable
Single Crimp Connectors
■ Fast application–one
crimping operation
terminates inner conductor,
outer braid and cable
support
■ Low application cost
support with one controlled
stroke.
Connectors for
Semi-Rigid Cable
Tyco Electronics can also
supply low-cost alternatives
with a commercial type
product line. These connec-
tors are designed around
the mil-specifications, offer-
ing comparable mechanical
and electrical performance.
■ Crimp and solder versions
available
■ Standard cable stripping
dimensions
■ Universal cable termination
common to all
configurations
Listed under the Component
Program of Underwriters
Laboratories Inc.,
R
File No. E81956
PC Board connectors are
recognized under the
Component Program of
Underwriters
R
Laboratories Inc.,
File No. E81956
Certified by Canadian
Related Product Data
R
Standards Association
File No. LR 7189
Military Category — All crimp
connectors are Category B Type
(Tyco Electronics Crimp Tooling), unless
otherwise noted.
Packaging — All Mil-Type connectors
are packaged individually and all
Commercial connectors are bulk pack-
aged unless otherwise noted.
Between Series Adapters
For TNC Between Series Adapters,
see pages 251-260.
29
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
TNC Connectors (Continued)
Specifications
Commercial
Single
Category B
O Crimp
(MIL Type)
Commercial
Solder
Jacks
O Crimp
Commercial
PCB
Solder
Clamp
Characteristics
Electrical
Crimp
Semi-Rigid
& Hex Crimp
50 & 75 Ohm
(MIL Type)
Impedance, Nom.
(Ohms)
50
50
50
50
50
50
50
Working Voltage
(Volts RMS)
500
500
500
500
500
335
500
Contact Resistance
(Milliohms)
Inner: 1.5
Outer: 3
Inner: 1.5
Outer: 0.2
Inner: 2.0
Outer: 0.3
Inner: 6.0
Outer: 3.0
Inner: 2.75
Outer: 1.0
Inner: 1.5
Outer: 0.2
Inner: 1.5
Outer: 0.2
Initial Insulation Resistance
(Megohms)
5000
1500
5000
1500
5000
1500
5000
1500
—
5000
1500
—
5000
1500
5000
1500
Dielectric Withstanding
Voltage (VAC)
Corona Level at 70,000 ft.
(Picocoulombs)
5 max.
@ 375 VRMS
5 max.
@ 375 VRMS
5 max.
@ 375 VRMS
5 max.
@ 375 VRMS
5 max.
@ 375 VRMS
RF Leakage, Max.
(dB)
60 @
55 @
60 @
55 @
—
—
—
—
2-3 GHz
2-3 GHz
2-3 GHz
2-3 GHz
RF Insertion Loss,
Max. (dB)
0.18 @
9 GHz
0.2 @
3 GHz
0.06 @
3-6 GHz
0.2 @
3 GHz
—
—
Frequency Range
(GHz)
0-4
1.35
0-11
1.3
0-7
0-4
—
0-4
—
0-15
1.35
0-11
VSWR in Frequency
Range Max.
1.30 @
4 GHz
1.40
Mechanical
Force to Engage/
10/2
2/2
6/6
—
—
—
—
2
2
Couple, lbs. [N]
[44.5/8.9]
[8.9/8.9]
[26.7/26.7]
[.023]
[.023]
Coupling Nut Retention,
Min. lbs. [N]
100
[444.8]
100
[444.8]
60
[266.9]
100
[444.8]
100
[444.8]
Cable Retention,
lbs. [N]
60 [266.9]
RG 58C/U
60 [266.9]
RG 58C/U
60 [266.9]
RG 58C/U
60 [266.9]
(PCB Ret)
60
[266.9]
40
[178.0]
—
Durability (Cycles)
500
500
500
500
500
500
500
Jam Nut Mounting Torque,
Max. lbs. [N•m]
25
[2.8]
25
[2.8]
25
[2.8]
25
[2.8]
25
[2.8]
25
[2.8]
25
[2.8]
Environmental
Temperature Range,
Operating (C°)
-65 to +1651
-55 to +852
-65 to +85
-55 to +85
-55 to +85
-65 to +165
-65 to +105
-65 to +165
MIL-STD-202
Method 204
Cond. B
MIL-STD-202
Method 204
Cond. B
MIL-STD-202
Method 204
Cond. B
MIL-STD-202
Method 201A
Cond. A
MIL-STD-202
Method 204
Cond. B
MIL-STD-202
Method 202
Cond. B
MIL-STD-202
Method 202
Cond. B
Vibration
MIL-STD-202
Method 213
MIL-STD-202
Method 213
MIL-STD-202
Method 213
MIL-STD-202
Method 213
MIL-STD-202
Method 213
MIL-STD-202
Method 213
Cond. I
MIL-STD-202
Method 213
Cond. I
Physical Shock
Thermal Shock
Cond. G, (50 G’s)
Cond. I, (100 G’s)
Cond. I, (100 G’s)
Cond. I, (100 G’s)
Cond. I, (100 G’s)
MIL-STD-202
Method 107
Cond. B
MIL-STD-20
Method 107
Cond. A
MIL-STD-202
Method 107
MIL-STD-202
Method 107
MIL-STD-202
Method 107
MIL-STD-202
Method 107
MIL-STD-202
Method 107
MIL-STD-202
Method 106
Type II
Moisture
Resistance
MIL-STD-202
Method 106
MIL-STD-202
Method 106
MIL-STD-202
Method 106
MIL-STD-202
Method 106
MIL-STD-202
Method 106
MIL-STD-202
Method 106
MIL-STD-202
Method 101
Cond. B
MIL-STD-202
Method 101
Cond. B
MIL-STD-202
Method 101
Cond. B
MIL-STD-202
Method 101
Cond. B
MIL-STD-202
Method 101
Cond. B
MIL-STD-202
Method 101
Cond. B
MIL-STD-202
Method 101
Cond. B
Salt Spray
Product
Specification
—
108-12001
108-12046
—
—
108-12032
—
1Assembled to cable with polytetrafluorethylene dielectric.
2Assembled to cable with polyethylene dielectric.
30
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
TNC Connectors (Continued)
Specifications (Continued)
Commercial
Single
Category B
O Crimp
(MIL Type)
Commercial
Solder
Jacks
O Crimp
Commercial
PCB
Solder
Clamp
Characteristics
Crimp
Semi-Rigid
& Hex Crimp
50 & 75 Ohm
(MIL Type)
Connector Material
Brass
Brass
Brass
Brass
Brass
Collar
—
—
—
—
QQ-B-626
QQ-B-626
QQ-B-626
QQ-B-626
QQ-B-626
Phos. Bronze
QQ-B-750
Beryl. Copper
QQ-C-530
Phos. Bronze
QQ-B-750
Beryl. Copper
QQ-C-530
Outer Contact
(Plug)
Brass
MIL-C-21768
Brass
QQ-B-626
Brass
QQ-B-626
Outer Contact
(Jack)
Brass
QQ-B-626
Brass
QQ-B-626
Zinc
QQ-Z-363
Zinc
QQ-Z-363
Zinc
QQ-Z-363
Brass
QQ-B-626
Brass
QQ-B-626
TEFLON
Polyethylene
Polypropylene
Gen. Purpose
TEFLON
MIL-P-19468
TEFLON
MIL-P-19468
Polypropylene
Gen. Purpose1
MIL-P-19468
Polyester PBT
MIL-P-24519
TEFLON
MIL-P-19468
TEFLON
MIL-P-19468
Dielectric
Center Contact
(Plug)
Brass
QQ-B-626
Brass
QQ-B-626
Brass
QQ-B-626
Brass
QQ-B-626
Brass
QQ-B-626
—
—
Beryl. Copper
ASTM-B-643,
QQ-C-530
Beryl. Copper
ASTM-B-643,
QQ-C-530
Center Contact
(Jack)
Beryl. Copper
QQ-C-530
Phos. Bronze
QQ-B-570
Phos. Bronze
QQ-B-570
Beryl Copper
QQ-C-530
Beryl Copper
QQ-C-530
Silicon Rubber
QQ-R-765
Silicon Rubber
QQ-R-765
Silicon Rubber
QQ-R-765
Silicone Rubber
QQ-R-765
Silicone Rubber
QQ-R-765
Gasket
—
—
—
—
Copper
QQ-C-576
Copper
QQ-C-576
Copper
QQ-C-576
Ferrule
—
—
Connector Primary Finishes2
Silver
QQ-S-365
Silver
QQ-S-365
Bright Nickel
QQ-N-290
Nickel
QQ-N-290
Nickel
QQ-N-290
Collar
—
—
Bright or
Matte Nickel
QQ-N-290
Outer Contact
(Plug & Jack)
Silver
QQ-S-365
Bright Nickel
QQ-N-290
Bright Nickel
QQ-N-290
Bright Nickel
QQ-N-290
Nickel
QQ-N-290
Nickel
QQ-N-290
Tin Lead,
Tin Lead,
Tin Lead,
Center Contact
(Plug & Jack)
Gold
MIL-G-45204
Silver
QQ-S-365
ASTM-B-545
ASTM-B-545
ASTM-B-545
Gold
MIL-G-45204
Gold
MIL-G-45204
Silver, QQ-S-365
Gold, MIL-G-45204
Silver, QQ-S-365
Gold, MIL-G-45204
Silver, QQ-S-365
Gold, MIL-G-45204
Silver
QQ-S-365
Gold
MIL-G-45204
Tin Lead
ASTM-B-5
Ferrule
—
—
—
—
1Several pc board connectors have an outer polyester PBT insulator per MIL-P-24519.
2If several finishes are listed, refer to individual catalog page(s) or customer drawings for exact specifications.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
31
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
TNC Connectors, 50 Ohm
Plugs, Crimp
Hex Crimp and
O Crimp
MIL Type
O Crimp
Weatherproof
L
Max.
16.26
[.640]
Dia.
Max.
13.21
[.520]
L
Max.
Dia.
Max.
Interchangeable
Dies for
PRO-CRIMPER
Hand Tool
CERTI-CRIMP
Hand Tool
with
Center
Contact
Plating
RG/U
Cable
Termination
Type
Body
Plating
Dim.
L
Dielectric
Style
Comments
Part No.
354940-1 or
Integral Die
PRO-CRIMPER
Adapter 679304-1
174, 188,
188A, 316
31.24
Hex Crimp
Hex Crimp
Gold
Gold
Nickel
Nickel
Polypropylene
Polypropylene
Commercial
Commercial
—
—
—
—
58436-3
5222506-5
5222506-6
1.230
179, 179A, 179B
161, 187, 187A
BELDEN 9221
31.24
1.230
58436-3
31.25
Hex Crimp
O Crimp
O Crimp
O Crimp
O Crimp
Gold
Gold
Gold
Gold
Gold
Nickel
Nickel
Nickel
Nickel
Nickel
Polypropylene
TEFLON
Commercial
MIL Type
MIL Type
MIL Type
MIL Type
—
—
58436-11
—
5222506-1
5225555-2
5225555-6
5225555-7
5225555-8
1.230
58, 58A, 58B, 58C
34.93
1.375
Weatherproof
Weatherproof
Weatherproof
Weatherproof
220045-2
220045-2
220015-1
220015-1
142, 142A
142B, 400
34.93
1.375
TEFLON
—
50.8
2.000
8, 8A, 213
TEFLON
—
50.8
2.000
9, 9A, 9B, 214
TEFLON
—
1Order Tyco Electronics PRO-CRIMPER Coaxial Hex Crimp Hand Tool assembly 58433-2, which includes dies 58436-1.
BELDEN is a trademark of Belden Wire
and Cable Company.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
Note: Part Numbers are RoHS compliant except:ꢀ Indicates non-RoHS compliant.
32
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
TNC Connectors, 50 Ohm (Continued)
Plugs for Semi Rigid-Cable
19.6
[.770]
Ref.
A
Dia.
16.5 Dia.
[.650] Max.
B
Dia.
16.26 Dia.
[.640] Max.
23.4
[.921]
Max.
Solder Type
Crimp Type
Interchangeable
Dies for
Interchangeable
Dies for Hand
Tool 69710-1
& 626 Pneu.
Center
Contact
Plating
PRO-CRIMPER
Hand Tool
RG/U
Cable
Termination
Type
Body
Plating
Dim. Dim.
Dielectric
Style
Comments
Part No.
A
B
354940-1 or
PRO-CRIMPER
Adapter 679304-1
Head 318161-1
405
Solid
PTFE
2.3
3.0
3
2
3
Semi-Rigid/
2.18 [.086]
Solder
Crimp
Solder
Gold
Gold
Gold
Passivate
Nickel
MIL Type
Commercial
MIL Type
—
—
1057635-1
228179-3
1057631-1
.089
.120
402
Semi-Rigid/
3.66 [.141]
RG 402/U
.141
3.66 [.141]
Weather
proof
1
TEFLON
—
Solid
PTFE
3.7
.144
4.6
.180
Gold
—
—
1Hand Tool 59980-1, Requires (2) Crimping Dies 312253-1 and (1) Locator 312644-1.
2Pneumatic Tool 58318-1, Requires (2) Crimping Dies 313720-1 and (1) Locator 312645-1.
3Refer to Recommended Assembly Tools in Tool Section.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
Note: Part Numbers are RoHS compliant except:ꢀ Indicates non-RoHS compliant.
33
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
TNC Connectors, 50 Ohm (Continued)
Right-Angle Plugs,
Crimp
O Crimp
MIL Type
O Crimp
Weatherproof
31.75
[1.250]
27.43
[1.080]
Max.
L
Max.
L
Max.
16.26
[.640]
Dia.
Max.
13.21
Dia.
[.520]
Interchangeable
Dies for
Center
Contact
Plating
CERTI-CRIMP
PRO-CRIMPER
Hand Tool
RG/U
Cable
Termination
Body
Plating
Dim.
L
Dielectric
Style
Comments
Hand Tool
with
Part No.
Type
354940-1 or
PRO-CRIMPER
Adapter 679304-1
Integral Die
174, 174A, 188
188A, 316
Polymethyl-
pentene
38.23
O Crimp
O Crimp
O Crimp
O Crimp
O Crimp
O Crimp
O Crimp
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Nickel
Nickel
Nickel
Silver
Nickel
Silver
Silver
Commercial
MIL Type
Commercial
MIL Type
MIL Type
MIL Type
MIL Type
—
—
318450-2
—
5414173-3
5225559-2
5414173-6
5225554-6
5225559-8
1-5225554-1
5225349-9
1.505
58, 58A, 58B
58C
47.63
1.875
TEFLON
Weatherproof
—
220045-2
—
55, 55A, 55B
223
Polymethyl-
pentene
38.23
1.505
220189-1
—
142, 142A, 142B
400
47.63
1.875
TEFLON
TEFLON
TEFLON
TEFLON
Weatherproof
Weatherproof
Weatherproof
—
220045-2
220015-1
220015-1
220015-1
63.5
2.500
8, 8A, 213
393, 225
—
63.5
2.500
—
59.52
2.343
9, 9A, 9B, 214
—
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
Note: Part Numbers are RoHS compliant except:ꢀ Indicates non-RoHS compliant.
34
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
TNC Connectors, 50 Ohm (Continued)
Jacks, Crimp
O Crimp
MIL Type
O Crimp
Weatherproof
L
Max.
11.43 Dia.
[.450] Max.
L
Max.
11.43 Dia.
[.450] Max.
Interchangeable
Dies for
PRO-CRIMPER
Hand Tool
Center
Contact
Plating
CERTI-CRIMP
Hand Tool
with
RG/U
Cable
Termination
Type
Body
Plating
Dim.
L
Dielectric
Style
Comments
Part No.
354940-1 or
Integral Die
PRO-CRIMPER
Adapter 679304-1
174, 174A, 188
188A, 316
Polymethyl-
pentene
30.48
O Crimp
O Crimp
O Crimp
O Crimp
O Crimp
Gold
Gold
Gold
Gold
Gold
Nickel
Silver
Silver
Nickel
Silver
Commercial
MIL Type
—
—
318450-2
—
5414171-3
225551-2
225551-5
414171-6
225551-6
1.200
58, 58A, 58B
58C
35.72
1.406
TEFLON
TEFLON
Weatherproof
Weatherproof
—
220045-2*
220045-2*
—
35.72
1.406
141, 141A, 303
MIL Type
—
55, 55A, 55B
223
Polymethyl-
pentene
29.85
1.175
Commercial
MIL Type
220189-1
—
142, 142A, 142B
400
35.72
1.406
TEFLON
Weatherproof
220045-2*
*Battery, Pneumatic
33.3
[1.31]
Jacks, Solder/Clamp
14.3
[.562]
Dia.
12.7
[.500]
11.1
[.437]
A/F
A/F
Center
Contact
Plating
RG/U
Cable
Termination
Body
Plating
Dielectric
Style
Part No.
Type
RG 58C/U,
RG 141 A/U
Solder/Clamp
Gold
Silver
TEFLON
MIL Type
1312569-1
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
Note: Part Numbers are RoHS compliant except:ꢀ Indicates non-RoHS compliant.
35
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
TNC Connectors, 50 Ohm (Continued)
Bulkhead Jacks, Crimp
Single Crimp
O Crimp
H
H
L
Max.
L
Max.
+.013
-.000
12.83+0.05
Dia.
-0.00
[.505
]
+.008
-.000
5.54
[.218
+0.03
-0.00
]
Maximum Panel Thickness Single Crimp 3.18 [.125];
Dual Crimp 6.35 [.250]
Recommended
Panel Cutout
H= 11/16 [.6875] max. across flats, 20.32 [.800] max. across points.
Interchangeable
Dies for
Center
Contact
Plating
CERTI-CRIMP
PRO-CRIMPER
Hand Tool
RG/U
Cable
Termination
Type
Body
Plating
Dim.
L
Dielectric
Style
Comments
Hand Tool
with
Part No.
354940-1 or
PRO-CRIMPER
Adapter 679304-1
Integral Die
174, 174A, 316
188, 188A
Polymethyl-
pentene
34.93
O Crimp
Gold
Gold
Nickel
Nickel
Commercial
MIL Type
—
—
—
—
318450-2
5414168-3
5331238 -
1.375
179, 179A, 179B
161, 187, 187A
BELDEN 9221
38.1
1.500
Single
Crimp
TEFLON
91910-1
RD 188, 316
Double Braid
Polymethyl-
pentene
34.93
O Crimp
O Crimp
O Crimp
O Crimp
O Crimp
Gold
Gold
Gold
Gold
Gold
Nickel
Nickel
Nickel
Nickel
Nickel
Commercial
Commercial
Commercial
Commercial
MIL Type
—
—
—
58539-1
220189-1
220189-1
220189-1
—
5414168-4
5414168-1
5414168-6
5414168-5
5225557-6
1.375
58, 58A, 58B, 58C
141, 141A, 303
Polymethyl-
pentene
34.93
1.375
—
—
223
55, 55A, 55B
Polymethyl-
pentene
34.93
1.375
—
Polymethyl-
pentene
34.93
1.375
—
—
142, 142A
142B, 400
38.1
1.500
TEFLON
Weatherproof
220045-2
BELDEN is a trademark of Belden Wire
and Cable Company.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
Note: Part Numbers are RoHS compliant except:ꢀ Indicates non-RoHS compliant.
36
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
TNC Connectors, 50 Ohm (Continued)
Bulkhead Jacks for
Semi-Rigid Cable,
Rear Mount
12.83 +-.01003
Dia.
[0.505 +0.05
]
-0.00
+.008
-.000
5.54
[.218 +0.03
]
H
-0.00
L
Max.
Maximum Panel Thickness 6.35 [.250]
Recommended
Panel Cutout
H= 17.45 [.687] max. across flats, 20.32 [.800] max. across points.
Center
RG/U
Cable
Termination
Type
Body
Dim.
L
Contact
Plating
Dielectric
Style
Part No.
228502-1
Plating
402
Semi-Rigid/
3.66 [.141]*
25.4
1.000
Crimp
Gold
Nickel
TEFLON
MIL Type
*Tooling—Hand Tool 59980-1, Requires (2) Crimping Dies 312253-1 and (1) Locator 220220-2.
30.5
Ref.
[1.200]
20.9
[.821]
12.1
6.40 Max.
[.475]
Min.
[.250] Panel
A
Dia.
12.7 Dia.
[.500] Min.
B
Dia.
Recommended
Panel Cutout
15.9
[.625]
19.1
[.750]
Hex.
Hex.
Center
RG/U
Cable
Termination
Body
Dim.
A
Dim.
B
Contact
Plating
Dielectric
Style
Part No.
Type
Solder
Solder
Plating
RG 402/U
3.66 [.141]
Pass. Stainless
Steel
3.7
.144
4.6
.180
Gold
Gold
Solid PTFE
Solid PTFE
MIL Type
MIL Type
1057676-1
1057679-1
RG 405/U
2.16 [.085]
Pass. Stainless
Steel
2.3
.089
3.0
.120
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
Note: Part Numbers are RoHS compliant except:ꢀ Indicates non-RoHS compliant.
37
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
www.tycoelectronics.com
C. America: 52-55-1106-0803
UK: 44-8706-080-208
RF Coax Connectors
TNC Connectors, 50 Ohm (Continued)
Panel Jacks, Crimp
11.2
[.441]
Dia.
Min.
12.7 ±0.1
.004
[.500
]
12.7 ±0.1
.004
[.500
]
2.71
[.107]
Clearance for
3-56 Screws
(4 Holes)
Dia.
Min.
17.86
[.703]
Sq.
Max.
L
Max.
Recommended
Panel Cutout
CERTI-CRIMP
Hand Tool
With
Center
Contact
Plating
RG/U
Cable
Termination
Body
Plating
Dim.
L
Dielectric
Style
Part No.
Type
Integral Die
58, 58A,
58B, 58C
34.93
1.375
Crimp
Gold
Silver
TEFLON MIL Type
220045-2
225348-2
Panel Jacks for
Semi-Rigid Cable
22.9
[.900]
16.3
[.642]
14.3
17.5
[.687]
Sq.
12.7
[.500]
Typ.
A
[.562]
Dia.
B
Dia.
3.20 Dia.
[.125] 4 Plcs.
Center
Contact
Plating
RG/U
Cable
Termination
Body
Dim.
Dim.
B
Dielectric
Style
Part No.
Type
Solder
Solder
Plating
A
RG 402/U
3.66 [.141]
3.7
.144
4.6
.180
Gold
Gold
Gold
TEFLON
TEFLON
MIL Type
MIL Type
Min.
Min.
1057697-1
1057699-1
RG 405/U
2.16 [.085]
2.3
.089
3.0
.120
Gold
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
Note: Part Numbers are RoHS compliant except:ꢀ Indicates non-RoHS compliant.
38
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
www.tycoelectronics.com
C. America: 52-55-1106-0803
UK: 44-8706-080-208
RF Coax Connectors
TNC Connectors, 50 Ohm (Continued)
VALOX Body
Metal Body
Right-Angle PC Board/
Panel Mount Jacks
1/2-28 Thread
1/2-28 Thread
12.83 +0.13
15.88
[.625]
Mtg. Hgt.
-.000
+0.05
15.88
[.625]
Mtg. Hgt.
[.505
]
-0.00
Dia.
C
L
A
B
B
C
34.93
[1.375]
L
34.93
[1.375]
A
5.54 +.008
-.000
[.218+0.03
]
Center
Contact
Plating
-0.00
Dimensions
Body
Material
ꢀ
Part Numbers
A
B
Maximum Panel Thickness 6.1 [.240]
8.56
21.21
VALOX, White
Metal
50
50
Gold
Gold
5227818-1
5227839-1
Recommended
Panel Cutout
.337
.835
8.26
.325
20.83
.820
G
± 0.08
10.16
[.400
± .003
]
± 0.08
2.01
[.079
Dia.
± .003
]
± 0.05
5.08
[.200
(2 Holes)
± .002
]
± 0.05
5.08
[.200
± .002
]
Mating
Face
S
G
± 0.08
± .003
0.89
[.035
± 0.05
Dia.
2.54
[.100
]
± .002
]
(2 Holes)
(Top View)
Recommended PC Board Layout
VALOX Body
Vertical PC Board/
Panel Mount Jacks
1/2-28 Thread
*2-56 Self-Tapping Screws:
For 1.57 [3/32] or greater panel thickness
Part No. 221108-2
15.88
[.625]
For less than 1.57 [3/32] panel thickness
Part No. 221108-4
34.93
[1.375]
Mtg. Hgt.
B
Lockwasher and Jam Nut
Body
Center Contact
Plating
Dimension
Part Number
5227820-1
Material
B
21.21
.835
VALOX, White
Gold
Part No.
1-329632-2
Part No.
1-329631-2
2.01 ±0.08
Dia.
5.08 ±0.05
[.200
.003
[.079
(2 Holes)
]
.002
]
5.08 ±0.05
.002
[.200
]
2.54 ±0.05
.002
10.16 ±0.08
[.100
]
.003
[.400
]
0.89 ±0.08
G
S
Dia.
10.16 ±0.08
.003
[.035
(2 Holes)
]
.003
[.400
]
(Top View)
VALOX is a trademark of General Electric
Company.
Recommended PC Board Layout
Note: Part Numbers are RoHS compliant except:ꢀ Indicates non-RoHS compliant.
39
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
TNC Connectors, 50 Ohm (Continued)
Right-Angle PC Board/
Mount Jacks
23.62
[.930]
Plating
Body—Nickel
Center Contact —Gold
Dielectric —TEFLON
28.98
[1.141]
Part No. 5413933-1
6.60
[.260]
2.74
Dia.
[.108]
5.59
2 Holes
[.220]
3.43
Dia.
[.135]
3.30
8.26
[.325]
2 Holes
[.130]
6.60
[.260]
16.51
[.650]
2.29
Dia.
3.30
[.130]
[.090]
2 Holes
1.27
[.050]
Dia.
2.79
[.110]
Recommended PC Board Cutout
Accepts 1.5
Dia. Max. Wire
[.059]
Bulkhead Solder Jacks
Insulation Bushing
+0.13
-.000
+.005
-.000
9.65
[.380
Dia.
]
L
Max.
Material—Nylon
Part No. 227223-1
+0.08
-.000
+.003
-.000
3.96
[.156
Dia.
]
4.04
[.159]
Max.
0.89
[.035]
11.43
[.450]
13.09
[.515]
Dia.
0.89
[.035]
Max.
Max.
Recommended
Panel Cutout
(Jack)
Panel Thickness Refer to chart below.
9.53
[.375]
14.86
[.585]
10.93
[.430]
Max.
11.56 ±0.08
Dia.
.003
Center
Contact
Plating
[.455
]
Body
Plating
Dim.
Panel
Dielectric
L
Part Number
5227764-2
Thickness
33.33
1.17-6.35
.046-.250
Nickel
Gold
VALOX
1.312
10.97 ±0.08
.003
[.432
]
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
VALOX is a trademark of General Electric
Company.
Recommended Panel Cutout
(Bushing)
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
40
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
TNC Connectors, 50 Ohm (Continued)
25.9
Ref.
Panel Mount Jack
Receptacles
[1.000]
19.1
[.750]
Sq.
10.1
[.750]
13.5
[.531]
Typ.
Shell
Part No.
2.0
[.080]
Nickel
Plated
Brass
1057775-11
1.6
[.062]
Dia.
1Captured Center Contact
2.2
[.086]
Dia.
3.2 Dia.
[.125] 4 Plcs.
37.0
[1.455]
Flange Mount Receptacles
Shell
Part No.
1057780-11
10.1
[.750]
19.1
[.750]
Sq.
Nickel
Plated
Brass
2.0
[.080]
13.5
[.531]
Typ.
15.0
[.590]
7.0
[.275]
Dia.
1Captured Center Contact
2.2
[.086]
Dia.
3.2 Dia.
[.125] 4 Plcs.
Jack-Jack Adapter
Center
Contact
Plating
Body
Plating
Dielectric
Part No.
Gold
Nickel
Polypropylene
5221325-1
36.2
[1.425]
Max.
12.96
[.510]
Dia.
Max.
Bulkhead Jack-Jack Adapter
12.83 +0.13
[.505
-.000
+.005
-0.00
]
Dia.
Center
Contact
Plating
Body
Dielectric
Acetal
Part No.
221500-1
Plating
Gold
Nickel
5.54 +0.08
-.000
[.218+.003
]
-0.00
Maximum Panel Thickness 6.35 [.250]
40.14
[1.580]
Max.
Recommended
Panel Cutout
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
41
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
TNC Connectors, 75 Ohm
Plugs, Crimp
Hex Crimp and
O Crimp
These connectors have
been designed for optimum
performance and have a
true 75 ohm impedance the
complete length of the con-
nector. The crimp die tool-
ing listed below is different
from the equivalent 50 ohm
connectors.
12.96 Dia.
[.510] Max.
L
Max.
Interchangeable
Dies for
Center
Contact
Plating
PRO-CRIMPER
Hand Tool
RG/U
Cable
Termination
Type
Body
Plating
Dim.
L
Dielectric
Style
Part No.
354940-1 or
PRO-CRIMPER
Adapter 679304-1
179, 179A, 179B, 187,
187A, BELDEN 9221
Polymethyl-
pentene
27.79
O Crimp
O Crimp
Gold
Gold
Nickel
Nickel
Commercial
Commercial
318451-2
58174-1
5221506-3
5221506-5
1.094
AT&T
735A
Polymethyl-
pentene
29.46
1.160
302
BELDEN 88241
89269
Polymethyl-
pentene
31.75
Hi-Temp 62A
Times PL62,
BERK-TEK
Hex Crimp
O Crimp
Gold
Gold
Nickel
Nickel
Commercial
Commercial
58425-1
58538-1
5413591-1
5221506-2
1.250
BTDC-59, BTDC-62
BELDEN 8281
9141, 9231
Polymethyl-
pentene
32.9
1.295
12.83 +0.13
[.505
Bulkhead Jack, Crimp
-.000
+.005
-.000
]
Dia.
5.54 +0.08
-.000
[.218+.003
]
H
-.000
34.29
[1.350]
Maximum Panel Thickness 6.35 [.250]
Max.
Recommended
Panel Cutout
RG/U
Cable
Termination
Center Contact
Plating
Body
Plating
Dim.
Tooling
H
Dielectric
Style
Part No.
Type
210, 62,
62A, 62B,
59, 59A, 59B,
BELDEN 9291, 9209,
9169, 89269
11/16 across flats,
Use Hand Tool
20.32
Polymethyl-
pentene
354940-1
.800
O Crimp
Gold
Nickel
Commercial
221509-1
with Die Set
max. across
58536-1
points
AT&T is a trademark of AT&T Corporation.
BELDEN is a trademark of Belden Wire
and Cable Company.
BERK-TEK is a trademark of Nexans, Inc.
Note: Part Numbers are RoHS compliant except:ꢀ Indicates non-RoHS compliant.
42
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
TNC Connectors, 75 Ohm (Continued)
Right-Angle PC Board/
Panel Mount Jacks
Metal Body
1/2-28 Thread
12.83 +0.13
-.000
+0.05
[.505
]
-0.00
15.88
[.625]
Dia.
Mtg. Hgt.
C
L
A
B
34.93
[1.375]
5.54 +.008
-.000
[.218+0.03
]
-0.00
Maximum Panel Thickness 6.1 [.240]
Recommended
Panel Cutout
Part Numbers
Center
Contact
Plating
Dimensions
Body
Material
ꢀ
Without
With
A
B
Mounting Posts
Mounting Posts
8.26
.325
20.83
.820
Metal
75
Gold
—
5413506-1
Bulkhead Jack-Jack
Adapter
Center
Body
Contact
Plating
Dielectric
Part No.
414396-1
Plating
Gold
Nickel
Polymethylpentene
40.14
[1.580]
Max.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
43
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors (50 ohm/75 ohm)
Product Facts
■ Bayonet lock coupling for
quick connect/disconnect
■ Various connectors available
in 50 and 75 ohm versions
■ Fully intermateable with
comparable BNC UG/U
connectors
■ Full range of Hex Crimp
and O Crimp Products for
common coaxial cables.
■ Low VSWR
■ Single crimp connectors
offer one crimping operation
for fast application
■ Twist-on connectors require
no special tooling for
application to the cable
■ Field serviceable (Category
A) connectors qualified to
MIL-C-39012
■ Field replaceable (Category
C) plugs with captivated
center contact
The Tyco Electronics BNC
RF connector family with
bayonet locking coupling
provides highly reliable,
quick connect/disconnect
coaxial connections.
nectors feature numerous
Tyco Electronics can also
styles including cable plugs supply low cost alternatives
■ Field replaceable plugs can
be terminated with industry
standard tooling
and jacks, adapters and
printed circuit board con-
nectors. In addition to a
variety of crimp type termi-
nations, connectors are fur-
nished in field replaceable
and twist-on styles. These
connectors accept a wide
with an extensive commer-
cial type product line. A
lower cost consumer series
product offers the capability
to supply center contacts in
strip form and allow for auto-
mated center contact crimp
technology. All connectors
■ Tarnish resistant Nickel
finish available
Exclusive single and
O crimp terminations allow
positive insulation grip
and require no soldering,
providing terminations at
a very low overall applied
cost.
■ Choice of different dielectrics
■ Listed under the Component
Program of Underwriters
Laboratories Inc.,
range of coaxial cables and are designed around the
are intermateable with
industry standard connec-
tors designed to MIL-C-
39012 specifications.
mil-specifications, but utilize
low-cost materials, offering
comparable mechanical
R
File No. E81956
■ PC Board soldered
connectors are recognized
under the Component
Program of Underwriters
Laboratories Inc.,
Available in both 50 and 75
ohm versions, these con-
and electrical performance.
R
File No. E81956
Related Product Data
Product Specifications —
108-1275 — BNC Ohm Terminators
108-12020 — BNC O Crimp
Connectors
■ Certified by Canadian
108-12002 — BNC Commercial
T Adapter
108-12095 — BNC Commercial 75
Ohm Connectors
Performance Specifications —
Page 45
Material Specifications — Page 46
Tooling — Pages 266-268
Standards
R
Association
File No. LR 7189
108-12096 — BNC Commercial Feed-
Thru and Bulkhead
108-12044 — BNC Commercial Hex
Crimp
108-12047 — BNC Commercial and
Hex Crimp Connectors
108-12074 — BNC Solder Jacks
108-12075 — BNC Connectors
(Category A)
Military Category — All MIL type
O crimp connectors are Category B Type
(Tyco Electronics Crimp Tooling), unless
otherwise noted.
Packaging — All MIL Type connectors
are packaged individually, all O crimp
connectors are bulk packaged and all Hex
crimp connectors are individually pack-
aged unless otherwise noted.
Adapters
108-12079 — BNC Commercial 50
Ohm Solder Jacks
108-12103 — BNC Commercial PCB
Press Fit Jacks
Application Specifications —
114-12001 — BNC Commercial PCB
Jack Press Fit
Between Series Adapters
For BNC Between Series Adapters, see
pages 251-260.
108-12078 — BNC Commercial PCB
Panel-Mount Jacks
44
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
specified. Values in brackets
are standard equivalents.
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors (50 ohm/75 ohm) Performance Specifications
Commercial
O Crimp
& Hex Crimp
50 Ohms
Commercial
O Crimp
& Hex Crimp
75 Ohms
Single
Crimp
(MIL Type)
Category B
O Crimp
(MIL Type)
Straight
Solder
Clamp
Right-Angle
Solder
Clamp
Commercial PC
Board
50 & 75 Ohms
Commercial
Solder
50 Ohm Jacks
Characteristics
Electrical
Impedance, Nom.
50
50
50
50
50
75
50 & 75
500
50 & 75
500
(Ohms)
Working Voltage
(Volts RMS)
500
500
500
500
500
500
Contact Resistance
(Milliohms)
Inner: 1.5
Outer: 0.3
Inner: 1.5
Outer: 0.2
Inner: 1.5
Outer: .20
Inner: 1.5
Outer: .20
Inner: 2.0
Outer: 1.0
Inner: 2.0
Outer: 2.0
Inner: 6/1.5
Outer: 3/0.2
Inner: 2.75
Outer: 1.0
Initial Insulation Resistance
(Megohms)
5000
1500
375
5000
1500
375
5000
1500
375
5000
1500
375
5000
1500
375
5000
1500
375
5000
1500
—
5000
1500
375
—
Dielectric Withstanding
Voltage (VAC)
Corona Level at 70,000 ft.
(Volts, RMS)
RF Leakage, Max.
(dB)
-55 at
2-3 GHz
-55 at
2-3 GHz
-55 at
2-3 GHz
-55 at
2-3 GHz
-55 at
1-2 GHz
—
—
RF Insertion Loss,
Max. (dB)
0.2 at
3 GHz
0.2 at
3 GHz
0.3 at
3 GHz
0.2 at
3 GHz
0.15 at
2 GHz
—
—
—
Frequency Range
(GHz)
0-4 and
0-2
0-2.5
1.35
0-4
0-4
0-4
0-4
0-2
0-4
—
VSWR in Frequency
Range Max.
1.30
1.30
1.35
1.30
1.30
—
Mechanical
Force to Engage (lbs. [N])/couple,
(in-lbs. [N-M]) max.
13.3/11.12
[3/2.5]
13.3/11.12
[3/2.5]
13.3/.028
[3/2.5]
13.3/.028
[3/2.5]
26.7/26.69
[6/6.0]
26.7/26.69
[6/6.0]
—
—
—
—
Coupling Nut Retention,
Min. N [lbs.]
444.8
[100]
444.8
[100]
444.8
[100]
444.8
[100]
266.9
[60]
266.9
[60]
Cable Retention,
N [lbs.]
266.9 [60]
(RG58C/U)
266.9 [60]
(RG58C/U)
177.9 [40]
(RG58C/U)
177.9 [40]
(RG58C/U)
266.9 [60]
(RG58C/U)
266.9 [60]
(RG58C/U)
266.9 [60]
(PCB Ret)
—
Durability (Cycles)
500
500
500
500
500
500
500
500
Jam Nut Mounting Torque,
Max. [N•m] (in. lbs.)
25
[2.8]
25
[2.8]
25
[2.8]
25
[2.8]
25
[2.8]
253/124
[2.8/1.4]
25
[2.8]
—
Environmental
Temperature Range,
Operating (C°)
-65 to +1651
-55 to +852
-65 to +85
-65 to +165
-65 to +165
-55 to +85
-55 to +85
-55 to +85
-65 to +165
MIL-STD-202 MIL-STD-202 MIL-STD-202
MIL-STD-202
Method 204
Cond. B
MIL-STD-1344
Method 2005
Cond. III
MIL-STD-202
Method 204
Cond. B
MIL-STD-202
Method 204
Cond. B
MIL-STD-202
Method 201A
Vibration
Method 204
Cond. B
Method 204
Cond. B
Method 204
Cond. B
MIL-STD-202 MIL-STD-202 MIL-STD-202
MIL-STD-202
Method 213
Cond. G
MIL-STD-1344
Method 2004
MIL-STD-202
Method 213
MIL-STD-202
Method 213
MIL-STD-202
Method 213
Physical Shock
Thermal Shock
Method 213
Method 213
Method 213
Cond. G
Cond. G, 50 G’s Cond. G, 50 G’s
Cond. G, 100 G’s
Cond. I, 100 G’s
Cond. I or A, 50 G’s Cond. I, 100 G’s
MIL-STD-1344
Method 1003
Cond. A
MIL-STD-202 MIL-STD-202 MIL-STD-202
Method 107 Method 107 Method 107
MIL-STD-202
Method 107
MIL-STD-202
Method 107
MIL-STD-202
Method 107
MIL-STD-202
Method 107
MIL-STD-1344
Method 1002
Type II
Moisture
Resistance
MIL-STD-202 MIL-STD-202 MIL-STD-202
Method 106 Method 106 Method 106
MIL-STD-202
Method 106
MIL-STD-202
Method 106
MIL-STD-202
Method 106
MIL-STD-202
Method 106
MIL-STD-202 MIL-STD-202 MIL-STD-202
MIL-STD-202
Method 101
Cond. B
MIL-STD-1344
Method 1001
Cond. B
MIL-STD-202
Method 101
Cond. B
MIL-STD-202
Method 101
Cond. B
MIL-STD-202
Method 101
Cond. B
Salt Spray
Method 101
Cond. B
Method 101
Cond. B
Method 101
Cond. B
Product
Specification
108-12044
108-12047
108-12002
108-12020
—
—
108-12095
108-12078
108-12079
1Assembled to cable with polytetrafluorethylene dielectric.
2Assembled to cable with polyethylene dielectric.
3For Metal Threads
4For Polyester Threads
45
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors (50 ohm/75 ohm) Performance Specifications (Continued)
Category
B & C
O Crimp
(MIL Type)
Commercial
O Crimp
Hex Crimp &
Terminators
Single
Crimp
(MIL Type)
Straight
Solder
Clamp
Right-Angle
Solder
Clamp
Commercial
PCB
Solder
Commercial
PCB
Press Fit
Commercial
Solder
Ohm Jacks
Connector
Component
Adapters
Connector Material
Brass
Brass
Brass QQ-B-626
Zinc QQ-Z-363
Brass
Collar
Brass
Brass
Brass
Brass
—
—
—
—
—
—
QQ-B-626
QQ-B-626
QQ-B-626
Brass
Brass
Outer Contact
(Plug)
QQ-B-626
Beryl. Copper
QQ-C-530
Phos. Bronze
QQ-B-750
Brass
MIL-C-21768
QQ-B-626
Beryl. Copper
QQ-C-530
Zinc
Zinc
Shell
Brass
Brass
Zinc
Zinc
QQ-Z-363
Brass
Brass
Brass
TEFLON
—
TEFLON
Brass
(Jack)
QQ-B-626
QQ-B-626
QQ-Z-363
QQ-Z-363
QQ-Z-363
QQ-B-626
QQ-B-626
TEFLON
Polyethylene
Polypropylene
Polymethylpentene
Gen. Purpose
TEFLON
TEFLON
MIL-P-19468
Polypropylene
Gen. Purpose
TEFLON
MIL-P-19468
Polymethylpentene
Gen. Purpose1
TEFLON
MIL-P-19468
MIL-P-19468
Polyester PBT
MIL-P-24519
MIL-P-19468
Polypropylene,
Gen. Purpose
Dielectric
Brass
Center Contact
(Plug)
Brass
QQ-B-626
Brass
QQ-B-626
Brass
QQ-B-626
QQ-B-626
Beryl. Copper
QQ-C-530
Brass
—
—
—
Phos. Bronze
QQ-B-570
Beryl. Copper
QQ-C-530
Phos. Bronze
QQ-B-570
Beryl. Copper
QQ-C-530
Beryl. Copper
ASTM-B-643
QQ-C-530
Beryl. Copper
ASTM-B-643
QQ-C-530
Center Contact
(Jack)
Beryl. Copper
QQ-C-530
Phos. Bronze
QQ-B-750
Beryl. Copper
QQ-C-530
Beryl. Copper
Beryl. Copper
Silicon Rubber
QQ-R-765
Silicon Rubber
QQ-R-765
Silicon Rubber
QQ-R-765
Silicon Rubber
QQ-R-765
Gasket
Ferrule
Silicon Rubber Silicon Rubber
—
—
—
—
—
—
Copper
QQ-C-576
Copper
QQ-C-576
Copper
QQ-C-576
—
—
—
Connector Primary Finishes2
Silver
Silver
Silver
QQ-S-365
Bright Nickel
QQ-N-290
QQ-S-365
Bright Nickel
QQ-N-290
Silver/
Bright Nickel
Silver/
Bright Nickel
Bright Nickel
QQ-N-290
QQ-S-365
Bright Nickel
QQ-N-290
Collar
—
—
—
Silver
Silver
Bright or
Matte Nickel
QQ-N-290
Outer Contacts
(Plug & Jack)
QQ-S-365
Gold
QQ-S-365
Bright Nickel
QQ-N-290
Silver/
Bright Nickel
Silver/
Bright Nickel
Bright Nickel
QQ-N-290
Bright Nickel
QQ-N-290
Bright Nickel
QQ-N-290
QQ-S-365
Bright Nickel
QQ-N-290
Tin Lead
Tin Lead
Tin Lead
Silver
QQ-S-365
Center Contacts
(Plug & Jack)
MIL-G-45204
Silver
Gold
ASTM-B-545
Silver, QQ-S-365
ASTM-B-545
Gold
ASTM-B-545
Gold
—
Gold
—
MIL-G-45204
Silver, QQ-S-365 MIL-B-45204 Silver, QQ-S-365
Gold
Gold, MIL-G-45204 Gold, MIL-G-45204
Gold, MIL-G-45204 MIL-G-45204
Silver
QQ-S-365
Tin Lead
Tin Lead
—
Ferrule3
QQ-S-365
—
—
—
ASTM-B-545
ASTM-B-545
1Several pc board connectors have an outer polyester PBT insulator per MIL-P-24519.
2If more than one finish is listed, refer to individual catalog page(s) or customer drawings for exact specification.
3Ferrules with tin-lead finish are used with nickel plated outer contacts.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
46
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
www.tycoelectronics.com
C. America: 52-55-1106-0803
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm
Single Crimp
Hex and O Crimp
Plugs, Crimp
L
Max.
14.53
[.572]
Dia. Max.
L
Max.
14.53
[.572]
Dia. Max.
Interchangeable Dies
Interchangeable
Dies for Hand
Tool 69710-1
& 626 Pneu.
CERTI-CRIMP
Hand Tool
with
for PRO-CRIMPER
Hand Tool 354940-1
or
RG/U
Cable
Termination
Type
Body
Plating
Dim.
L
Dielectric
Style
Part No.
Integral Die
PRO-CRIMPER
Adapter 679304-1
Head 318161-1
178, 178A,
178B,
196, 196A
33.33
1.312
Single Crimp
Silver
TEFLON
MIL Type
69245-4
—
69471
-
5330876-0
33.53
Hex Crimp
O Crimp
Nickel
Nickel
Nickel
Silver
Nickel
Nickel
Nickel
Silver
Nickel
Nickel
Nickel
Polyethylene
Polyethylene
TEFLON
Commercial
Commercial
MIL Type
—
220009-5
—
58436-3
318450-2
1424050-1
—
—
2-5221128-1
1-5227079-6
5225395-7
1.320
27.69
1.090
220217-3
220026-1
69422-
—
174,
188, 188A,
316
30.18
1.188
O Crimp
33.33
1.312
Single Crimp
Hex Crimp
O Crimp
TEFLON
MIL Type
69245-2
—
2-5330061-1
2-5221128-3
2-5227079-2
5225395-8
33.53
1.320
Polyethylene
Polyethylene
TEFLON
Commercial
Commercial
MIL Type
58436-3
1424050-1
—
179, 179A,
179B, 161,
187, 187A,
BELDEN
27.69
1.090
—
220217-3
220026-1
69408-
—
30.18
1.188
O Crimp
-
—
—
9221
33.33
1.312
Single Crimp
O Crimp
TEFLON
MIL Type
91910-1
58539-1
58436-12
58435-11
2-5329446-1
8-5227079-2
2-5221128-7
6-5227079-73
RD 316, 188,
Double Braid
27.69
1.090
Polyethylene
Polyethylene
Polyethylene
Commercial
Commercial
Commercial
69477-4
—
33.53
1.320
Hex Crimp
O Crimp
—
BELDEN
8219
27.69
1.090
220187-1
220217-1
BELDEN 9907,
89907 COMM/
SCOPE 2104
27.69
1.090
O Crimp
Nickel
Polyethylene
Commercial
220187-1
318452-2
220217-1
6-5227079-84
27.69
O Crimp
O Crimp
Nickel
Nickel
Polyethylene
TEFLON
Commercial
MIL Type
69477-4
—
58539-1
91904-1
58376-1
69669-2
1-5227079-9
1-5225395-0
1.090
BELDEN
8218
30.18
1.188
1Order Tyco Electronics PRO-CRIMPER Coaxial “O” Crimp Hand Tool assembly 58433-1, which includes dies 58435-1.
2Order Tyco Electronics PRO-CRIMPER Coaxial Hex Crimp Hand Tool assembly 58433-2, which includes dies 58436-1.
3For use with BELDEN 9907 cable, COMM/SCOPE 3104 cable, and BELDEN 8219 cable only.
4For use with BELDEN 89907 cable, and COMM/SCOPE 2104 cable only.
BELDEN is a trademark of Belden Wire
and Cable Company.
COMM/SCOPE is a trademark of
Commscope, Inc.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
Note: Part Numbers are RoHS compliant except:ꢀ Indicates non-RoHS compliant.
47
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Single Crimp
Hex and O Crimp
Plugs, Crimp (Continued)
L
Max.
14.53
[.572]
Dia. Max.
L
Max.
14.53
[.572]
Dia. Max.
Interchangeable Dies
Interchangeable
Dies for Hand
Tool 69710-1
& 626 Pneu.
CERTI-CRIMP
for PRO-CRIMPER
Hand Tool 354940-1
or
RG/U
Cable
Termination
Type
Body
Plating
Dim.
L
Hand Tool
with
Dielectric
Style
Part No.
Integral Die
PRO-CRIMPER
Adapter 679304-1
Head 318161-1
33.53
Hex Crimp
O Crimp
Nickel
Nickel
Nickel
Silver
Nickel
Nickel
Nickel
Nickel
Nickel
Silver
Nickel
Nickel
Silver
Polyethylene
Polyethylene
TEFLON
Commercial
Commercial
MIL Type
—
58436-12
58435-11
220189-3
91904-4
58436-12
58435-11
220189-3
58435-11
220189-3
91904-3
58435-11
220189-3
—
—
5221128-13
5227079-5
1.320
27.69
1.090
220187-1
220217-1
69727-
69223-1
—
58, 58A,
58B, 58C
33.74
1.328
2
O Crimp
69478-1
5225395-1
33.33
1.312
2
Single Crimp
Hex Crimp
O Crimp
TEFLON
MIL Type
—
2-5329444-1
1-5221128-0
4-5227079-3
4-5225395-2
5227079-6
33.53
1.320
BELDEN
88240,
Polyethylene
Polyethylene
TEFLON
Commercial
Commercial
MIL Type
—
BERK-TEK
BTDC-58,
COMM/
33.33
1.312
220187-1
220217-1
69727-
220217-1
69727-
69424-
220217-1
69727-
69429-1
33.33
1.312
2
SCOPE 2135
O Crimp
69478-1
27.69
1.280
O Crimp
Polyethylene
TEFLON
Commercial
MIL Type
220187-1
223,
55, 55A,
55B
43.64
1.718
2
O Crimp
69478-1
5225395-3
33.33
1.312
Single Crimp
O Crimp
TEFLON
MIL Type
—
2-5329444-2
6-5227079-1
5225395-6
27.69
1.090
Polyethylene
TEFLON
Commercial
MIL Type
220187-1
142, 142A,
142B, 400
30.18
1.188
2
O Crimp
69478-1
33.33
1.312
2
Single Crimp
TEFLON
MIL Type
69331-1
2-5330358-2
Consult Tyco Electronics for recommended crimp tooling.
1Order Tyco Electronics PRO-CRIMPER Coaxial “O” Crimp Hand Tool assembly 58433-1, which includes dies 58435-1.
2Order Tyco Electronics PRO-CRIMPER Coaxial Hex Crimp Hand Tool assembly 58433-2, which includes dies 58436-1.
3Bulk packaged.
BELDEN is a trademark of Belden Wire
and Cable Company.
BERK-TEK is a trademark of Nexans, Inc.
COMM/SCOPE is a trademark of
Commscope, Inc.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
Note: Part Numbers are RoHS compliant except:ꢀ Indicates non-RoHS compliant.
48
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Single Crimp
Hex and O Crimp
Plugs, Crimp (Continued)
L
Max.
14.53
[.572]
Dia. Max.
L
Max.
14.53
[.572]
Dia. Max.
Interchangeable Dies
Interchangeable
Dies for Hand
Tool 69710-1
& 626 Pneu.
CERTI-CRIMP
for PRO-CRIMPER
Hand Tool 354940-1
or
RG/U
Cable
Termination
Body
Plating
Dim.
L
Hand Tool
with
Dielectric
Style
Part No.
Type
Integral Die
PRO-CRIMPER
Adapter 679304-1
Head 318161-1
33.53
Hex Crimp
O Crimp
Nickel
Nickel
Nickel
Nickel
Silver
Polyethylene
Polyethylene
Polyethylene
TEFLON
Commercial
Commercial
Commercial
MIL Type
—
58436-12
58435-11
58435-11
58537-1
—
—
220217-2
220217-2
—
1-5221128-1
5227079-7
1.320
27.69
1.090
220187-2
220187-2
—
124, 140, 210,
62, 62A, 62B,
59, 59A, 59B,
BELDEN 9291,
9209, 9269
27.69
1.090
O Crimp
1-5227079-1
5225395-2
30.18
1.188
O Crimp
33.33
1.312
Single Crimp
TEFLON
MIL Type
69141-1
—
2-5329445-1
302, BELDEN
88241, 89269,
Hi-Temp 62A,
Times PL62,
BERK-TEK, BTDC-59,
BTDC-62
33.53
Hex Crimp
O Crimp
Nickel
Nickel
Polyethylene
TEFLON
Commercial
MIL Type
—
58436-12
58537-1
—
1-5221128-1
4-5225395-1
1.320
34.14
1.344
69477-1
69669-1
Hi-Temp 59,
Times PL59,
PLF59 (20 AWG C.C.)
33.33
1.312
O Crimp
Nickel
Polyethylene
Commercial
—
58537-1
—
5-5227079-3
BELDEN
9104, 9240,
9112, 9167,
9259, 9266,
Times
33.53
Hex Crimp
O Crimp
Nickel
Nickel
Polyethylene
TEFLON
Commercial
MIL Type
—
—
58436-12
258537-1
—
1-5221128-7
2-5225395-0
1.320
30.94
1.218
69669-1
FM-59
BELDEN 8281,
9141, 9231,
Western Electric
724, 728, 3049
41.50
1.634
Single Crimp
Silver
Polypropylene
MIL Type
69652-
—
220000-1
5330878
8, 8A,
213
27.31
O Crimp
O Crimp
O Crimp
O Crimp
O Crimp
Silver
Silver
Silver
Silver
Silver
TEFLON
TEFLON
TEFLON
TEFLON
TEFLON
MIL Type
MIL Type
MIL Type
MIL Type
MIL Type
220015-1
220015-1
220015-1
220015-1
220015-1
—
—
—
—
—
—
—
—
—
—
5225886-1
5225886-4
5225886-7
225886-5ꢀ
5225886-1
1.075
47.63
1.875
11, 11A
BELDEN 9914,
Times FM-8
47.63
1.875
Alpha 9847,
BELDEN 8213, 9292
47.63
1.875
9, 9A, 9B,
214
52.38
2.062
1Order Tyco Electronics PRO-CRIMPER Coaxial “O” Crimp Hand Tool assembly 58433-1, which includes dies 58435-1.
2Order Tyco Electronics PRO-CRIMPER Coaxial Hex Crimp Hand Tool assembly 58433-2, which includes dies 58436-1.
2Tyco Electronics PRO-CRIMPER II Hand Tool Frame without dies Part No. 354940-1
BELDEN is a trademark of Belden Wire
and Cable Company.
BERK-TEK is a trademark of Nexans, Inc.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
Note: Part Numbers are RoHS compliant except:ꢀ Indicates non-RoHS compliant.
49
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Plugs, Twist-On
Related Product Data
Twist-On plugs must be used with cable
that has a solid conductor. These plugs
are not recommended for applications
where the cable frequently moves or
flexes.
38.10
[1.500]
14.53
[.572]
Dia. Max.
RG/U
Cable
Contact
Plating
Body
Plating
Mating Twist-On Jack—Page 52
Dielectric
Style
Part No.
59, 59A,
59B
Polymethyl-
pentene
Gold
Nickel
Commercial
5414265-3
Single Crimp
Hex and O Crimp
Right-Angle Plugs,
Crimp
26.57
26.57
[1.046]
[1.046]
L
Max.
L
Max.
14.53
[.572]
Dia. Max.
14.53
[.572]
Dia. Max.
Interchangeable Dies
for PRO-CRIMPER
Hand Tool 354940-1
or
PRO-CRIMPER
Adapter 679304-1
Interchangeable
Dies for Hand
Tool 69710-1
& 626 Pneu.
CERTI-CRIMP
Hand Tool
with
Center
Contact
Plating
RG/U
Cable
Termination
Type
Body
Plating
Dim.
L
Dielectric
Style
Part No.
Integral Die
Head 318161-1
Polymethyl-
pentene
39.45
Hex Crimp
Gold
Gold
Nickel
Silver
Commercial
MIL Type
—
—
58436-3
91910-1
—
5413959-3
5331178-0
1.553
174, 188,
188A, 316
44.45
1.750
Single Crimp
TEFLON
69422-
179, 179A,
179B, 161,
39.45
Polymethyl-
pentene
Hex Crimp
Hex Crimp
Hex Crimp
Gold
Gold
Gold
Nickel
Nickel
Nickel
Commercial
Commercial
Commercial
—
—
—
58436-3
58436-3
58436-1
—
—
—
5413959-4
5413959-5
5413959-6
1.553
187, 187A,
BELDEN 9221
180, 180A, 180B,
195, 195A
BELDEN 9907,
89907, 8219,
COMM/SCOPE
2104, 3104
Polymethyl-
pentene
39.45
1.553
Polymethyl-
pentene
39.45
1.553
Polymethyl-
pentene
39.45
Hex Crimp
O Crimp
Gold
Gold
Gold
Gold
Gold
Gold
Nickel
Nickel
Silver
Nickel
Silver
Silver
Commercial
MIL Type
MIL Type
MIL Type
MIL Type
MIL Type
—
69478-1
—
58436-1
220189-3
91904-1
220189-3
91904-3
—
—
5413959-1
5225974-1
5331175-0
5225974-2
5331182-0
5331182-0
1.553
58, 58A,
58B, 58C
37.29
1.468
44.45
1.750
37.29
1.468
44.45
1.750
TEFLON
TEFLON
TEFLON
TEFLON
TEFLON
69727-1
69223-1
69727-1
69429-1
69429-1
Single Crimp
O Crimp
69478-1
—
55, 55A,
55B, 223
Single Crimp
Single Crimp
142, 142A,
142B, 400
44.45
1.750
69331-1
124, 140, 210,
62, 62A, 62B,
59, 59A, 59B,
BELDEN 9291,
9209, 9269
37.29
1.468
O Crimp
Gold
Nickel
TEFLON
MIL Type
—
58537-1
69669-1
5225974-5
BELDEN is a trademark of Belden Wire and Cable Company.
COMM/SCOPE is a trademark of Commscope, Inc.
TEFLON is a trademark of E.I. Dupont de Nemours and Company.
Note: Part Numbers are RoHS compliant except:ꢀ Indicates non-RoHS compliant.
50
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Single Crimp
Hex and O Crimp
Jacks, Crimp
11.1
[.437]
Dia. Max.
11.08
[.436]
Dia. Max.
L
Max.
L
Max.
Interchangeable Dies
for PRO-CRIMPER
Hand Tool 354940-1
or
PRO-CRIMPER
Adapter 679304-1
Interchangeable
Dies for Hand
Tool 69710-1
& 626 Pneu.
CERTI-CRIMP
Hand Tool
with
Center
Contact
Plating
RG/U
Cable
Termination
Type
Body
Plating
Dim.
L
Dielectric
Style
Part No.
Integral Die
Head 318161-1
Polymethyl-
pentene
33.02
Hex Crimp
O Crimp
Gold
Gold
Gold
Gold
Nickel
Nickel
Nickel
Silver
Commercial
Commercial
MIL Type
—
—
—
—
58436-3
1424050-1
1424050-1
—
—
5413779-3
5228979-7
5225396-7
2-5330062-1
1.300
Polypro-
pylene
30.48
1.200
220217-3
220026-1
69422-
174, 188,
188A, 316
30.48
1.200
O Crimp
TEFLON
TEFLON
-
33.33
1.312
Single Crimp
MIL Type
179, 179A,
179B, 161,
Polymethyl-
pentene
-33.02
1.300
Hex Crimp
Gold
Nickel
Commercial
—
58436-3
—
2-5413779-4
187, 187A,
BELDEN 9221
Polypro-
pylene
30.48
O Crimp
O Crimp
Gold
Gold
Gold
Nickel
Nickel
Silver
Commercial
MIL Type
220187-1
58435-11
91901-1
91904-3
220217-1
69727-
5228979-5
5225396-11
2-5329452-2
1.200
58, 58A,
58B, 58C
30.48
1.200
2
TEFLON
TEFLON
—
223, 55,
55A, 55B
33.33
1.312
Single Crimp
MIL Type
69140-2
220187-2
—
69424-
124, 140, 210,
62, 62A, 62B,
59, 59A, 59B,
BELDEN 9291,
9209, 9269
Polypro-
pylene
30.48
1.200
O Crimp
O Crimp
Gold
Gold
Nickel
Nickel
Commercial
MIL Type
58435-11
58537-1
220217-2
269669-1
5228979-6
5225396-2
30.48
1.200
TEFLON
1Order Tyco Electronics PRO-CRIMPER Coaxial “O” Crimp Hand Tool assembly 58433-1, which includes dies 58435-1.
BELDEN is a trademark of Belden Wire
and Cable Company.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
Note: Part Numbers are RoHS compliant except:ꢀ Indicates non-RoHS compliant.
51
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Jacks, Twist-On
Related Product Data
Twist-on jacks must be used with
cable that has a solid conductor.
These jacks are not recommended
for applications where the cable
frequently moves or flexes.
40.14
[1.580]
Max.
Mating Twist-On Plug—Page 50
RG/U
Cable
Center
Body
Dielectric
Style
Part No.
222428-1
Contact
Plating
59, 59A, 59B
Gold
Nickel
Acetal
Commercial
Panel Jacks, Crimp
11.2
[.441]
Dia.
±0.1
12.7
[.500
±.004
]
17.84
[.702]
±0.1
Max.
12.7
[.500
28.96
[1.140]
Max.
±.004
]
2.77
[.109]
Dia.
Recommended Panel Cutout
Interchangeable Dies
Interchangeable
Dies for Hand
Tool 69710-1
& 626 Pneu.
CERTI-CRIMP
Hand Tool
with
for PRO-CRIMPER
Hand Tool 354940-1
or
Center
Contact
Plating
RG/U
Cable
Termination
Type
Body
Plating
Dielectric
Style
Part No.
Integral Die
PRO-CRIMPER
Adapter 679304-1
Head 318161-1
174, 188, 188A, 316
58, 58A, 58B, 58C
O Crimp
O Crimp
Gold
Gold
Nickel
Nickel
TEFLON MIL Type
—
1424050-1
91901-1
220026-1
69727-
5225397-7
5225397-1
TEFLON MIL Type -69478-1
124, 140, 210, 62, 62A, 62B,
59, 59A, 59B, BELDEN 9291,
9209, 9269, 89269
O Crimp
Gold
Nickel
TEFLON MIL Type -69477-1
258537-1
269669-1
5225397-2
BELDEN is a trademark of Belden Wire
and Cable Company.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
Note: Part Numbers are RoHS compliant except:ꢀ Indicates non-RoHS compliant.
52
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Single Crimp
Hex and O Crimp
Bulkhead Jacks,
Crimp
Note: Panel Insulating
Bushings—Page 54
H
L
Max.
H
L
Max.
12.83+-0.1003
12.82
[.505]
Dia.
+.005
[.505
]
-.000
Dia. Min.
Recommended
Panel Cutouts
Maximum Panel
11.04
[.435]
Min.
Thickness 3.18 [.125]
5.54+-0.0008
+.003
-.000
[.218
]
H = 11/16" across flats, 20.32 [.800] Max. across points
Interchangeable Dies
Interchangeable
Dies for Hand
Tool 69710-1
& 626 Pneu.
CERTI-CRIMP
Hand Tool
with
for PRO-CRIMPER
Hand Tool 354940-1
or
Center
Contact
Plating
RG/U
Cable
Termination
Body
Plating
Dim.
L
Dielectric
Style
Part No.
Type
Integral Die
PRO-CRIMPER
Adapter 679304-1
Head 318161-1
Polymethyl-
pentene
36.83
Hex Crimp
O Crimp
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Nickel
Nickel
Nickel
Silver
Nickel
Silver
Nickel
Commercial
Commercial
MIL Type
MIL Type
MIL Type
MIL Type
MIL Type
—
—
—
—
—
—
—
58436-3
—
—
5413771-3
5228980-7
1.450
Polypro-
pylene
34.93
1.375
220217-3
220026-1
69422-
174, 188,
188A, 316
35.71
1.406
O Crimp
TEFLON
TEFLON
TEFLON
TEFLON
TEFLON
—
5225398-7
32.13
1.265
Single Crimp
O Crimp
—
2-5330063-1
5225398-8
35.71
1.406
179, 179A,
179B, 161,
1424050-1
91910-1
91904-1
220026-1
69408-
187, 187A,
32.13
1.265
Single Crimp
O Crimp
2-5329458-1
1-5225398-5
BELDEN 9221
35.71
1.406
Times RD316
69669-2
BELDEN is a trademark of Belden Wire
and Cable Company.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
Note: Part Numbers are RoHS compliant except:ꢀ Indicates non-RoHS compliant.
53
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Single Crimp
Hex and O Crimp
Bulkhead Jacks,
Crimp (Continued)
Note: Panel Insulating Bushings—
at the bottom of this page
L
Max.
H
L
Max.
H
12.83+-0.1003
12.82
[.505]
Dia.
+.005
[.505
]
-.000
Dia. Min.
Recommended
Panel Cutouts
Maximum Panel
11.04
[.435]
Min.
Thickness 3.18 [.125]
5.54+-0.0008
+.003
-.000
[.218
]
H = 11/16" across flats, 20.32 [.800] Max. across points
Interchangeable Dies
Interchangeable
Dies for Hand
Tool 69710-1
& 626 Pneu.
CERTI-CRIMP
Hand Tool
with
for PRO-CRIMPER
Hand Tool 354940-1
or
Center
Contact
Plating
RG/U
Cable
Termination
Type
Body
Plating
Dim.
L
Dielectric
Style
Part No.
Integral Die
PRO-CRIMPER
Adapter 679304-1
Head 318161-1
58, 58A,
58B, 58C,
BELDEN 88240,
BERK-TEK
Polymethyl-
pentene
36.83
1.450
Hex Crimp
Gold
Nickel
Commercial
—
58436-1
—
5413771-1
BTDC-58,
COMM/SCOPE 2135
Polypro-
pylene
34.93
O Crimp
O Crimp
Gold
Gold
Gold
Gold
Gold
Nickel
Nickel
Silver
Nickel
Nickel
Commercial
MIL Type
MIL Type
MIL Type
MIL Type
220187-1
58435-11
91901-1
91904-4
91901-1
91901-1
220217-1
69727-
5228980-5
5225398-1
1.375
58, 58A,
58B, 58C
41.28
1.625
TEFLON
TEFLON
TEFLON
TEFLON
—
—
—
—
32.13
1.265
Single Crimp
O Crimp
69223-1
69727-
2-5329456-1
5225398-3
5225398-6
223,
55, 55A, 55B
35.71
1.406
142, 142A,
142B, 400
35.71
1.406
O Crimp
69727-
124, 140, 210,
62, 62A, 62B,
59, 59A, 59B,
BELDEN 9291,
9209, 9269
Polypro-
pylene
34.93
1.375
O Crimp
Gold
Nickel
Commercial
220187-2
58435-11
220217-2
5228980-6
1Order Tyco Electronics PRO-CRIMPER Coaxial “O” Crimp Hand Tool assembly 58433-1, which includes dies 58435-1.
0.89
[.035]
Panel Insulating
5.46
[.215]
Bushings for
±0.13
12.93
[.509]
Dia.
14.73
±.005
0.81
[.032]
[.580
Dia.
]
Bulkhead Jacks
13.95
[.549]
Dia.
Material—Nylon
±0.08
14.1
[.555
Note: Can not be used with single
crimp bulkhead jacks.
±.003
]
17.45
[.687]
Dia.
BELDEN is a trademark of Belden Wire
and Cable Company.
BERK-TEK is a trademark of Nexans, Inc.
COMM/SCOPE is a trademark of
Commscope, Inc.
14.58
[.574]
Dia.
Recommended Panel Cutout
Part No. 330620 (2 Required)
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
54
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Plugs, for JIS Cables, Crimp
Plating
Body — Nickel
Center Contact — Gold
14.53
[.572]
L
Max.
Dia. Max.
Interchangeable Dies
for PRO-CRIMPER
Hand Tool 354940-1
or
PRO-CRIMPER
Adapter 679304-1
Termination
Dim.
L
JIS Cable
Dielectric
Part No.
Type
33.53
1.320
3D-2V
Hex Crimp
Polyethylene
58436-1
3-5221128-1
Without Solder Terminal
With Solder Terminal
Bulkhead Solder Jacks,
Front Mount
Body Plating —Nickel
22.23
[.875]
Accepts 1.5 [.059]
Dia. Max. Wire
Accepts 1.5 [.059]
Dia. Max. Wire
9.65/9.75
[.380/.384]
Dia.
3/8" - 32
Thread
3/8" - 32
Thread
.396/4.04
[.156/.159]
L
Max.
L
Max.
W
W
Dia. Max.
Recommended Panel Cutout
Dia. Max.
Part No.
Without Solder With Solder
Dimensions
Contact
Material
Panel
Thickness
Insulating
Bushing
Dielectric
L
W
Terminal*
Terminal**
26.93
1.060
13.09
.515
1.17-3.18
.046-.125
227223-1 or
221951-1
Silver
VALOX
5227754-3
5227755-3
33.33
13.09
1.17-6.35
227223-1 or
—
5227169-7
5227755-2
5227169-8
5227716-3
5227169-5
5227755-1
1.312
.515
.046-.250
221951-1
VALOX
TEFLON
VALOX
26.93
1.060
13.09
.515
1.17-3.18
.046-.125
227223-1 or
221951-1
5227754-2
5227169-4
5227715-3
—
Gold
33.33
1.312
13.09
.515
1.17-6.35
.046-.250
227223-1 or
221951-1
26.93
1.060
13.09
.515
1.17-3.18
.046-.125
227223-1 or
221951-1
33.33
1.312
13.09
.515
1.17-6.35
.046-.250
227223-1 or
221951-1
Tin
26.93
1.060
13.09
.515
1.17-3.18
.046-.125
227223-1 or
221951-1
5227754-1
**Includes lockwasher and jam nut.
**Includes solder terminal and jam nut.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
VALOX is a trademark of General Electric
Company.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
55
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
4.04
[.159]
1.09
[.043]
3.94
[.155]
Insulating Bushings
Max.
Max.
1.78
[.070]
Dia.
12.7
[.500]
Dia.
11.43
[.450]
0.94
[.030]
Max.
10.93
[.430]
0.81
[.032]
11.94
[.470]
Dia.
14.86
[.585]
9.53
[.375]
15.88
[.625]
9.53
[.375]
Dia.
Dia.
Dia.
Part No. 227223-1
Part No. 221951-1
±0.08
12.83
[.505
±0.08
11.56
[.455
±.003
]
±.003
]
Dia.
Dia.
±0.06
±0.08
10.97
[.432
12.07
[.475
±.003
]
±.003
]
Recommended
Panel Cutout
Recommended
Panel Cutout
3/8" - 24
Thread
Isolated Bulkhead Solder Jacks,
Front Mount
9.91 +-0.1203
Accepts
1.5 [.059]
DIa. Max.
Wire
Dia.
+.005
[.390
]
-.000
Plating
Body—Nickel
Dielectric —White VALOX
Center
Contact
Plating
Flange &
Thread
Part
No.
+0.08
3.89 -0.00
31.75
[1.250]
13.09 Dia.
[.515] Max.
+.003
Material
Max.
[.153
]
-.000
Tin
VALOX
VALOX
VALOX
5227726-1
5227726-2
5227726-3
Panel Thickness 1.17-6.35 [.046-.250]
Silver
Gold
Recommended
Panel Cutout
3/8" - 24 Thread
9.60 +-0.0008
Dia.
+.003
[.378
]
Plating
-.000
Body—Nickel
Center Contact —Silver
Dielectric —Black VALOX
Flange & Thread Material
Black VALOX
12.83
[.505]
Max.
—
+0.08
3.94 -0.00
26.80
[1.055]
Max.
+.003
[.155
]
-.000
Panel Thickness 1.17-3.18 [.046-.125]
Recommended
Panel Cutout
Part No. 5414194-1
Rubber
Gasket
Sealed Bulkhead Solder Jack,
Rear Mount
+0.13
17.78 Dia.
[.700] Max.
12.83
[.505
-0.00
Dia.
+.005
]
-.000
1/2" - 28
Thread
Plating
Accepts .
1.5 [.059]
DIa. Max.
Wire
Body—Nickel
Center Contact —Gold
Dielectric
—Polymethylpentene
5.54+-0.0008
This connector is designed to prevent
moisture from entering the interface
from the rear of the connector.
+.003
[.218
]
-.000
31.75
[1.250]
Max.
Maximum Panel Thickness 6.35 [.250]
Recommended
Panel Cutout
VALOX is a trademark of General Electric
Company.
Part No. 5227426-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
56
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
VALOX Body
Metal Body
Right-Angle Jacks
PC Board/Panel Mount
1/2-28 Thread
1/2-28 Thread
C
C
Mtg. Hgt.
Mtg. Hgt.
Body—Nickel
Dielectric —Polymethylpentene
C
C
L
A
A
L
B
B
34.93
[1.375]
34.93
[1.375]
Mounting Post Style
Compliant Post
12.83+-0.1003
Part No.
Center
Contact
Plating
Dimensions
B
Body
Without
With
With
Material
L
L
A
C
Mounting Posts Mounting Posts
Compliant Posts
8.59 21.21 15.88
.338 .835 .625
3.48
Tin
5226990-1
5227161-1
5227161-3
5227161-7
5227161-2
5227161-6
5227161-9
5415046-1
5227661-1
5227677-1
5413879-1
5413879-2
—
—
—
—
—
—
—
—
—
—
—
—
—
L
.137
VALOX,
White
8.59 21.21 15.88
.338 .835 .625
3.48
.137
Gold1
Gold1
Tin
5226990-3
—
6.91 21.21 13.18
.272 .835 .519
3.48
.137
—
—
8.59 21.21 15.88
.338 .835 .625
3.48
.137
—
—
8.59 21.21 15.88
.338 .835 .625
3.48
.137
Gold1
Gold1
Gold1
Tin
5226990-6
—
VALOX,
Black
6.91 21.21 13.18
.272 .835 .519
3.48
.137
—
—
6.17 21.21 11.68
.243 .835 .460
—
—
—
—
L
8.26 20.83 15.88
.325 .820 .625
3.48
.137
—
8.26 20.83 15.88
.325 .820 .625
3.48
.137
Gold1
Gold1
Gold2
Gold1
5227676-1
1274668-1
—
—
—
Metal
6.91 20.83 12.70
.272 .820 .500
3.48
.137
Dia.
+.005
6.91 20.83 12.70
.272 .820 .500
3.48
.137
[.505
]
—
-.000
High Temp.
Housing
6.91 21.21 13.18
.272 .835 .519
2.79
.110
—
—
5415218-5
Plating:
Gold1—0.00076 [.000030] thick
Gold2—0.00127 [.000050] thick
Note: If an Insulating Bushing is required see part number 330620 and Panel Cutout on page 54.
5.54+-0.0008
Dia.
+.003
[.218
]
-.000
Maximum Panel Thickness 6.1 [.240]
Recommended Panel Cutout
Lockwasher and Jam Nut
Without Mounting Posts
With Mounting Posts
±0.08
±0.08
2.64 [.104] Dia.
Clearance Hole for
2-56 Self-Tapping Screw*
(2 Holes)
10.16
[.400
10.16
[.400
±0.05
2.01
.079
±.003
±.003
]
]
±.002
]
(2 Holes)
±0.05
±0.05
5.08
[.200
5.08
[.200
±.002
±.002
]
]
±0.05
±0.05
5.08
[.200
5.08
[.200
Mating
Face
Mating
Face
±.002
±.002
]
]
G
S
±0.08
±0.08
0.89
[.035
G
S
0.89
[.035
±.003
±.003
]
]
Part No.
1-329632-2
Part No.
1-329631-2
±0.05
±0.05
2.54
[.100
2.54
[.100
±.002
±.002
]
(Top View)
]
(Top View)
Recommended PC Board Layouts
VALOX is a trademark of General Electric
Company.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
57
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
VALOX Body
Metal Body
Vertical Jacks
PC Board/Panel Mount
L
L
Plating
Body—Nickel
1/2-28 Thread
1/2-28 Thread
15.88
15.88
[.625]
[.625]
Dielectric —Polymethylpentene
B
B
34.93
[1.375]
34.93
[1.375]
12.83+-0.1003
Mtg. Hgt.
Mtg. Hgt.
Dia.
+.005
[.505
]
-.000
Part No.
Without
Center
Contact
Plating
Body
Material
Dim.
B
Dim.
L
5.54+-0.0008
With
Mounting Mounting
Dia.
+.003
[.218
]
Posts
Posts
-.000
21.21
3.48
Tin
Gold
Tin
5226993-1 5227222-1
5226993-3 5227222-3
5226993-2 5227222-2
5226993-6 5227222-6
Maximum Panel Thickness 6.1 [.240]
.835
.137
VALOX,
White
21.21
.835
3.48
.137
Recommended Panel Cutout
21.21
.835
3.48
.137
VALOX,
Black
21.21
.835
3.48
.137
Gold
Tin
20.83
.820
3.48
.137
—
—
5227671-1
5227673-1
Lockwasher and Jam Nut
Metal
20.83
.820
3.48
.137
Gold
Note: If an Insulating Bushing is required see part number 330620 and
Panel Cutout on page 54.
Without Mounting Posts
With Mounting Posts
Part No.
1-329632-2
Part No.
1-329631-2
2.64 [.104] Dia.
Clearance Hole
for 2-56
Self-Tapping
Screw* (2 Holes)
±0.08
2.01
±0.05
5.08
±0.05
±.003
[.079
(2 Holes)
5.08
[.200
]
±.002
]
±.002
[.200
]
±0.05
±0.05
5.08
5.08
[.200
±.002
±.002
]
[.200
]
±0.05
±0.05
2.54
[.100
2.54
[.100
±.002
±.002
]
]
±0.08
10.16
[.400
±0.08
10.16
[.400
±.003
]
±.003
]
±0.08
±0.08
G
10.16
[.400
S
0.89
[.035
0.89
[.035
G
10.16
[.400
S
±.003
±.003
±0.08
]
]
±0.08
±.003
]
±.003
]
(Top View)
(Top View)
Recommended PC Board Layouts
* Screw for board thickness of 2.38 [.093] or greater Part No. 221108-2.
Screw for thickness of less than 2.38 [.093] Part No. 221108-4.
VALOX is a trademark of General Electric
Company.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
58
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Jacks with
Mounting Flanges
PC Board/Panel Mount
1/2-28 Thread
15.88 [.625]
Mounting Height
12.83+-0.1003
Dia.
+.005
[.505
]
-.000
8.59
C
L
[.338]
21.21
34.93
[1.375]
[.835]
5.54+-0.0008
Dia.
+.003
[.218
]
-.000
Maximum Panel Thickness 6.1 [.240]
Recommended Panel Cutout
Body
Material
Center Contact
Plating
Part No.
Tin
5226978-1
5226978-3
VALOX,
White
Gold
Lockwasher and Jam Nut
3.3 [.130] Dia.
Clearance Hole
for 5-40 Screw
±0.08
22.86
[.900
±.003
]
Mating
Face
8.89
[.350]
11.43
[.450]
Part No.
1-329632-2
Part No.
1-329631-2
2.54
[.100]
G
S
±0.08
0.89
±.003
[.035
]
(Top View)
Recommended PC Board Layout
VALOX is a trademark of General Electric
Company.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
59
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Vertical Metalized Jacks
PC Board Mount
Body
Center
Leg
Recommended PC Board Layouts
Dielectric
VALOX
VALOX
VALOX
VALOX
VALOX
VALOX
TEFLON
VALOX
VALOX
Style
A
Part No.
5227699-1
5227699-2
5227699-3
5414460-11
5222420-1
5415189-1
5413969-2
5414305-1
5221123-2
Plating
Contact Plating
Length L
6.35
.250
Style A
Silver
L
6.35
.250
Gold
Tin
A
±0.08
12.7
[.500
±.003
]
6.35
.250
A
±0.05
6.35
[.250
Nickel
±.002
]
3.81
.150
Gold
Silver
Gold
Gold
Silver
Gold
A
4.45
.175
C
±0.08
12.7
[.500
17.45
[.687]
6.35
.250
±.003
]
Sq.
E
15.88
3.30
.130
B
Drill Holes for
±0.05
6.35
[.250
[.625]
±0.05
± .002
0.94
[.037
]
±.002
]
3.18
.125
Dia. Pin (5 Places)
Tin-Lead
C
3.43
.135
D
1With .76 [.030] standoffs on top of legs.
Style B
L
±0.08
6.88
[.271
±.003
]
±0.08
1.50
±0.08
3.44
[.135
Dia.
±.003
[.059
]
±.003
]
(4 Holes)
±0.08
6.88
[.271
±.003
]
20.57
[.810]
±0.08
3.43
[.135
±0.08
1.02
[.040
Dia.
±.003
]
±.003
]
Style C
Style D
±0.05
6.88
[.271
L
±.003
]
±0.08
2.44
[.096
Dia.
±0.05
1.07
[.042
±.003
L
]
Dia.
±0.05
3.43
[.135
±.002
]
(4 Holes)
4.32
±.002
]
[.170]
±0.05
1.73
[.068
Dia.
±0.05
6.88
[.271
6.48
[.255]
±.002
]
±0.08
1.32
[.052
±.003
]
Dia.
±.003
]
3.73
[.147]
15.88
7.47
[.294]
[.625]
16.64
[.655]
Style E (Panel Mount)
ꢀ0.08
12.70
[.500
±.003
]
±0.06
6.35
[.250
±.002
]
Drill Hole
to Receive
ꢀ0.06
0.94
20.78 ꢀ0.38
[.818 ꢀ.015]
±.002
[.037
]
Dia. Pin,
5 Required
L
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
ꢀ0.08
12.70
[.500
±.003
]
VALOX is a trademark of General Electric
Company.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
60
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
± 0.08
± .003
Vertical Metalized Jacks,
PC Board Mount
7.50
[.295
Signal Contact Hole
]
24.00
[.945]
± 0.08
Switching
Contact
Hole
1.00
[.039
2 Plcs.
± .003
]
± 0.10
1.70
± .004
[.067
]
± 0.08
± .003
2.50
[.098
± 0.25
]
10.72
[.422
± 0.10
3.00
[.118
± .010
4 Plcs.
]
± .004
]
± 0.08
± .003
1.50
[.059
± 0.08
]
10.70
[.421
± .003
2 Plcs.
]
Part No. 1274314-1
(Switching)
Recommended
PC Board Layout
± 0.08
± .003
3.75
[.148
]
± 0.08
1.00
[.039
24.00
[.945]
± .003
]
± 0.10
± .004
1.70
[.067
]
± 0.08
± .003
2.50
[.098
]
3 Plcs.
± 0.10
± .004
]
± 0.25
3.00
[.118
10.72
[.422
± .010
]
± 0.08
1.50
[.059
± .003
]
± 0.08
10.70
[.421
± .003
2 Plcs.
]
Part No. 1274315-1
Recommended
PC Board Layout
Body
Plating
Contact
Plating
Part
No.
Dielectric
Tin
Tin
Silver
Silver
Polyphenylene
Polyphenylene
6274314-1
6274315-1
Press Fit Vertical Metalized Jack,
PC Board Mount
Insulating Bushing
Material— Polypropylene
Part No. 222163-1
Only to be used on Part Nos. 5222006-1
& 5222462-1
±0.05
6.88
11.94 Dia.
[.470] Max.
±.002
[.271
]
1.5+-0.0180
[.059
±0.05
3.43
[.135
+.003
-.004
]
±.002
]
Dia.
4 Holes
14.61
[.575]
11.94
[.470]
Dia.
Dia.
±0.05
6.88
[.271
±0.08
1.02
[.040
±.002
]
Dia.
±.003
]
20.57
[.810]
Max.
2.96
[.115]
Max.
Recommended PC Board Layout
PC Board Thickness Not Less Than 0.99 [.093]
6.61
[.260]
Max.
Part No. 5222006-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
61
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Right-Angle Metalized Jacks,
PC Board Mount
± 0.08
6.6
[.260
10.97 [.432]
Mounting Height
± .003
]
Body
Center
Part
No.
Dielectric
Plating
Contact Length
± 0.08
3.3
[.130
± 0.08
2.11
[.083
Polymethyl-
pentene
4.34
.171
± .003
]
Nickel
Tin
5413631-1*
5413631-2*
5413631-3*
± .003
]
Dia.
4.34
.171
(4 holes)
TEFLON
± 0.08
6.6
[.260
± 0.08
± .003
1.17
[.046
]
Dia.
C
Polymethyl-
pentene
3.33
.131
6.15
[.242]
L
± .003
± 0.51
]
Nickel
27.64
[1.088
± .020
]
Maximum PC Board Thickness 2.54 [.100]
Recommended PC Board Layout
±0.18
1.19
Dia.
±.007
[.047
]
±0.08
3.81
[.150
±.003
]
8.64
[.340]
±0.08
7.62
[.300
±.003
]
Part
No.
5414373-1
Body
Nickel
Dielectric
TPX
Contact
Gold
21.85
[.860]
25.40
[ 1.000]
±0.08
7.62
[.300
±0.08
1.78
[.070
Dia.
±.003
]
±.003
] 2 Holes
Recommended PC Board Layouts
± 0.08
6.6
[.260
Right-Angle Metalized Jacks,
PC Board/Panel Mount
± .003
]
± 0.08
3.3
[.130
± 0.08
2.11
± .003
]
Body
Plating
Part
No.
Dia.
± .003
Dielectric
[.083
4 holes
]
± 0.51
27.64
[1.088
±.020
]
Tin
Tin
TEFLON
TPX
5415025-2
5415025-1
± 0.08
6.6
[.260
± .003
± 0.08
]
1.17
[.046
Dia.
± .003
± 0.25
±.010
]
6.15
[.242
]
± 0.18
10.97
[.432
12.83+-0.1003
[.505
11.66
[.459]
±.007
]
Dia.
+.005
-.000
]
1/2-28 Thread
4.34
[.171]
5.64+-0.0008
Dia.
+.003
[.222
]
-.000
Lockwasher and Jam Nut see page 59.
Maximum Panel Thickness 6.35 [.250]
Recommended Panel Cutout
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
TPX is a trademark of Mitsui Chemicals
America, Inc.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
62
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Style A
(Jack-Plug-Jack)
Style B
With Insulated
Cover
Style C
(Jack-Jack-Jack)
Tee Adapters
(Jack-Plug-Jack)
D
Insulation Material
Polyphenylene oxide
D
D
F
E
E
E
F
Body
Center Contact
Comparable
UG/U
Connector
Packaging
No.
Per Pkg.
Dimensions
Style
Material
Material
Dielectric
Part No.
D
E
F
and Plating
and Plating
Brass,
Nickel
BE CU, Gold
(30)2
32.54
26.19
14.27
Bulk
TEFLON
Acetal
Acetal
Acetal
Acetal
Acetal
TEFLON
Acetal
274A
—
221543-2
5413592-2
5413592-6
5413592-9
1-5413592-1
5413366-21
221988-1
1.281
1.031
.562
(100)
PH BR, Gold
(15)2
33.02
1.300
27.31
1.075
14.50
.571
Bulk
(100)
BE CU, Gold
(30)2
33.02
1.300
27.31
1.075
14.50
.571
Bulk
(100)
A
—
Zinc,
Nickel
PH BR, Gold
(15)2
33.02
1.300
27.31
1.075
14.50
.571
Individual
(1) 3
—
BE CU, Silver
(200)2
33.02
1.300
27.31
1.075
14.50
.571
Individual
(1)
—
Zinc,
Nickel
BE CU, Gold
(30)2
32.54
1.281
31.12
1.225
17.15
.675
1
Bulk
(100)
B
—
Brass,
Nickel
BE CU, Silver
(200)2
32.54
1.281
23.37
.920
Bulk
(100)
—
—
—
—
C
Zinc,
Nickel
PH BR, Gold
(50)2
32.54
1.281
23.62
.930
Bulk
(100)
5414311-1
1Gray insulation cover
2(Microinches min thickness)
3(Special graphics)
Tee Adapter
Covers
± 0.76
114.55
[4.510
± .030
]
Material—Polypropylene, general
purpose
Part
No.
Color
Black
Ivory
221586-1
221586-3
5.08
[.200]
Dia.
15.11
[.595]
Dia.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
63
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Jack-Jack Adapters
Style A
Style B
Center
Contact
Plating
Body
Plating
Dielectric
Style
Part No.
Nickel
Nickel
Silver
Gold
TEFLON
TEFLON
A
A
221551-1
221551-3
35.81
[1.410]
32.54
[1.281]
Polymethyl-
pentene
Nickel
Gold
B
5414414-1
Bulkhead Jack-Jack
Adapters
Center
Contact
Plating
Dimensions
Body
Dielectric
Part No.
Plating
H
L
12.83+-0.1003
Dia.
+.005
17.45
.687
38.10
1.500
[.505
]
Nickel
Silver
Gold1
Gold2
330024-
5228226-1
5228226-3
TEFLON
-.000
17.78
.700
36.07
1.420
Poly-
ethylene
Nickel
L
Max.
H
Max.
17.78
.700
36.07
1.420
Poly-
ethylene
Nickel
Plating:
Gold1—0.00127 [.000050] thick
Note: If an Insulating Bushing is required see part number 330620 and
5.54+-0.0006
Gold2—0.00076 [.000015] thick
+.003
[.218
]
-.000
Panel Cutout on page 54.
Recommended Panel Cutout
H= 11/16 across flats, 20.32 [.800] across points.
12.83+-0.1003
Isolated Bulkhead Jack-Jack
Adapter
Dia.
+.005
[.505
]
-.000
Center
Body
Contact
Plating
Dielectric
Part No.
Plating
5.54+-0.0006
Nickel
Gold
Polymethylpentene
5414105-1
36.07
[1.420]
Dia.
15.87
[.625]
+.003
[.218
]
-.000
Recommended Panel Cutout
H= 11/16 across flats, 20.32 [.800] across points.
Plug-Plug Adapter
Contact
Plating
Body
Part No.
415796-1
Plating
Gold
Nickel
31.8
[1.252]
Ref.
Right-Angle Adapters
(Jack-Plug)
14.53 Dia
[.572] Max.
Center
Body
Contact
Dielectric
Part No.
Plating
Plating
Nickel
Nickel
Nickel
Silver
Gold
Gold
TEFLON
TEFLON
5329517-1
5222165-2
5414666-1
22.89
[.901]
Max.
26.97
[1.062]
Polymethylpentene
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
64
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Terminator Plugs
50, 75, 93 Ohm
Part No.
With Tether
5221629-11
5221629-21
—
Resistor
Specification
Without Tether
5221629-4
5221629-5
5221629-6
—
Tether
Plating
1 Watt, 50 Ohm
1 Watt, 75 Ohm
1 Watt, 93 Ohm
0.5 Watt, 75 Ohm
1 Watt, 50 Ohm
Body—Nickel
Center Contact —Gold
Dielectric —Polyethylene
—
1-5221629-61
—
14.53 Dia.
[.572] Max.
[1.300]
33.02
1 Tether is conductive with #4 stud size
#6 Stud Size
Insulated
Terminators
Long Cover
Insulation Material
Polyphenylene oxide
38.10
[1.500]
38.10
[1.500]
Max.
Max.
17.40
[.685]
17.40
[.685]
Short Cover*
Register
Color
Cover
Style
Part
No.
Specification
Long
Short
Long
5413557-1
5413364-2
5413557-2
Gray
1 Watt, 50 Ohm
Black
* The Short Cover is required when mating the Terminator with a Tee Adapter.
Jack Covers
Shorting Caps
22.10
[.870]
Max.
14.53 Dia.
[.572] Max.
Plating
Body— Nickel
Center Contact —Gold
Body Plating
Silver
Part No.
330022
Nickel
1-330022-2
15.24
[.600]
101.6
[4.000]
14.53
[.572]
#6 Stud Size
Dia. Max.
Part No. 413453-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
65
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm
Hex and O Crimp
Plugs, Crimp
These connectors have been designed
for optimum performance and have a
true 75 ohm impedance the complete
length of the connector. The crimp die
tooling listed below is different from the
equivalent 50 ohm connectors.
14.53
[.572]
Dia. Max.
L
Max.
Plugs
Interchangeable
Dies for
PRO-CRIMPER
Hand Tool
Interchangeable
Dies for Hand
Tool 69710-1
& 626 Pneu.
Center
Contact
Plating
RG/U
Cable
Termination
Type
Body
Plating
Dim.
L
Dielectric
Style
Part No.
354940-1 or
PRO-CRIMPER
Adapter 679304-1
Head 318161-1
29.46
179, 179A,
179B, 187,
Hex Crimp
O Crimp
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Nickel
Nickel
Nickel
Nickel
Nickel
Nickel
Nickel
Nickel
Polyethelene
Polyethelene
Polyethelene
Polyethelene
Polyethelene
Polyethelene
Polyethelene
Polyethelene
Commercial
Commercial
Commercial
Commercial
Commercial
Commercial
Commercial
Commercial
58425-2
318451-2
58425-2
58174-1
58425-2
58174-1
58425-1
58536-1
—
—
5413589-8
5221185-8
1-5413589-0
1-5221185-8
5413589-3
5221185-3
5413589-2
5221185-2
1.160
187A, 161,
35.56
1.140
BELDEN 9221
29.46
1.160
Hex Crimp
O Crimp
—
AT&T 735A
27.69
1.090
58248-3
—
29.46
1.160
Hex Crimp
O Crimp
BELDEN 8218
27.69
1.090
58248-3
—
29.46
1.160
140, 210, 62, 62A,
62B, 59, 59A, 59B,
BELDEN 9291,
9209, 9269
Hex Crimp
O Crimp
27.69
1.090
58248-2
302, BELDEN 89269,
88241, Hi-Temp 62A,
Times PL-62, Berk Tek
BTDC-59, BTDC-62
29.46
Hex Crimp
Hex Crimp
Gold
Gold
Nickel
Nickel
Polyethelene
Polyethelene
Commercial
Commercial
58425-1
58425-1
—
—
5413589-1
5413589-9
1.160
BELDEN 8212, 9104,
9112, 9167, 9240, 9259,
9266, Times FM-59,
(RG 59 Type
29.46
1.160
27.69
1.090
O Crimp
Hex Crimp
O Crimp
O Crimp
O Crimp
Gold
Gold
Gold
Gold
Gold
Nickel
Nickel
Nickel
Nickel
Nickel
Polyethelene
Polyethelene
Polyethelene
Polyethelene
Polyethelene
Commercial
Commercial
Commercial
Commercial
Commercial
58536-1
58425-1
58536-1
58536-1
58538-1
58425-3
58248-2
—
5221185-9
5413589-7
1-5221185-0
5221185-1
5221185-7
with 20 AWG C.C.)
29.46
1.160
BELDEN 9145,
AT&T 734A
27.69
1.090
—
BELDEN 9248,
9114
25.65
1.010
—
37.85
1.490
6, 6A
58248-1
BELDEN 8281,
9141, 9231,
Western
Electric 724,
728, 3049
29.46
1.160
Hex Crimp
O Crimp
Gold
Gold
Nickel
Nickel
Polyethelene
Polyethelene
Commercial
Commercial
—
5413589-5
5221185-5
28.45
1.120
58538-1
58248-1
COMM/SCOPE
S59 Hec
28.96
O Crimp
O Crimp
Gold
Gold
Nickel
Nickel
Polyethelene
Polyethelene
Commercial
Commercial
58536-1
58536-1
—
—
2-5221185-9
3-5221185-1
1.140
COMM/SCOPE
F59 Hec-z
28.96
1.140
AT&T is a trademark of AT&T Corporation.
BELDEN is a trademark of Belden Wire
and Cable Company.
COMM/SCOPE is a trademark of
Commscope, Inc.
Note: Part Numbers are RoHS compliant except:ꢀ Indicates non-RoHS compliant.
66
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued)
Plugs for JIS Cables, Crimp
Plating
Body—Nickel
Center Contact —Gold
14.53
[.572]
L
Max.
Dia. Max.
Interchangeable Dies
for PRO-CRIMPER
Hand Tool 354940-1
or
PRO-CRIMPER
Adapter 679304-1
Termination
Dim.
L
JIS Cable
Dielectric
Part No.
Type
29.46
3C-2V
Hex Crimp
Hex Crimp
Polymethylpentene
Polymethylpentene
58425-1
58425-2
1-5413589-1
1-5413589-6
1.160
29.46
1.160
2.5C-2V
Bulkhead Jacks for JIS
Cables, Crimp
Plating
Body—Nickel
Center Contact —Gold
Dielectric —Polymethylpentene
20.32
[.800]
Max.
L
Max.
Interchangeable Dies
for PRO-CRIMPER
Hand Tool 354940-1
or
PRO-CRIMPER
Adapter 679304-1
Termination
Type
Dim.
L
JIS Cable
Dielectric
Part No.
36.83
1.450
1.5C-2V
Hex Crimp
75Ω
58425-2
5413590-4*
*Packaged in 100 pieces per bag.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
67
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued)
Hex and O Crimp
Right-Angle Plugs, Crimp
27.18
[1.070]
Max.
L
Max.
14.53 Dia.
[.572] Max.
Interchangeable
Dies for
PRO-CRIMPER
Hand Tool
Interchangeable
Dies for Hand
Tool 69710-1
& 626 Pneu.
Center
Contact
Plating
RG/U
Cable
Termination
Type
Body
Plating
Dim.
L
Dielectric
Style
Part No.
354940-1 or
PRO-CRIMPER
Adapter 679304-1
Head 318161-1
179, 179A,
179B, 187,
187A, 161
Polymethyl-
pentene
39.45
Hex Crimp
Hex Crimp
Hex Crimp
Gold
Gold
Gold
Nickel
Nickel
Nickel
Commercial
Commercial
Commercial
58425-2
58425-2
58425-2
—
—
—
-5413588-8
1-5413588-0
5413588-4
5413588-2
1.553
BELDEN 9221
Polymethyl-
pentene
39.45
1.553
AT&T 735A
AT&T KS
19224 L2,
RD179
Polymethyl-
pentene
39.45
1.553
Double Braid
140, 210, 62,
62A, 62B, 59,
59A, 59B,
BELDEN 9291,
9209, 9269
39.45
Polymethyl-
pentene
1
58425-1
58536-1
Hex Crimp
O Crimp
Gold
Gold
Nickel
Nickel
Commercial
Commercial
—
1.553
Polymethyl-
pentene
39.88
1.570
5221402-2
5413588-9
5221402-4
58248-2
-
BELDEN 8212,
9104, 9112,
9240, 9167,
9259, 9266,
Times FM-59,
(RG 59 Type
with 20
Polymethyl-
pentene
39.45
1.553
Hex Crimp
O Crimp
Gold
Gold
Nickel
Nickel
Commercial
Commercial
58425-1
58536-1
—
—
AWG C.C.)
BELDEN 9145,
AT&T 734A
Polymethyl-
pentene
39.88
1.570
AT&T is a trademark of AT&T Corporation.
BELDEN is a trademark of Belden Wire
and Cable Company.
Note: Part Numbers are RoHS compliant except:ꢀ Indicates non-RoHS compliant.
68
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued)
Hex and O Crimp
Jacks, Crimp
11.08 Dia.
[.436] Max.
L
Max.
Interchangeable
Dies for
PRO-CRIMPER
Hand Tool
Interchangeable
Dies for Hand
Tool 69710-1
& 626 Pneu.
Center
Contact
Plating
RG/U
Cable
Termination
Type
Body
Plating
Dim.
L
Dielectric
Style
Part No.
354940-1 or
PRO-CRIMPER
Adapter 679304-1
Head 318161-1
33.02
179, 179A,
179B, 161,
Hex Crimp
O Crimp
Gold
Gold
Gold
Nickel
Nickel
Nickel
Polyethelene
Polyethelene
Polyethelene
Commercial
Commercial
Commercial
58425-2
318451-2
58425-2
—
—
—
5413760-8
5221199-5
5413760-3
1.300
187, 187A,
30.48
1.200
BELDEN 9221
33.02
1.300
BELDEN 8218
Hex Crimp
140, 210, 62,
62A, 62B, 59,
59A, 59B,
30.48
O Crimp
Gold
Gold
Nickel
Nickel
Polyethelene
Polyethelene
Commercial
Commercial
58536-1
58425-1
58248-2
—
5221199-2
5413760-1
1.200
BELDEN 9291,
9209, 9269
302, BELDEN 88241,
89269, Hi-Temp
62A, Times
PL-62, Berk
Tek BTDC-59,
BTDC-62
33.02
1.300
Hex Crimp
BELDEN 8212,
9104, 9112,
9240, 9167,
9259, 9266,
Times FM-59,
(RG 59 Type
with 20
33.02
Hex Crimp
O Crimp
Gold
Gold
Nickel
Nickel
Polyethelene
Polyethelene
Commercial
Commercial
58425-1
58536-1
—
—
5413760-9
5221199-1
1.300
AWG C.C.)
BELDEN 9248,
9114
30.48
1.200
BELDEN is a trademark of Belden Wire
and Cable Company.
Note: Part Numbers are RoHS compliant except:ꢀ Indicates non-RoHS compliant.
69
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued)
Hex and O Crimp
Bulkhead Jacks, Crimp
12.83+-0.1203
Dia.
+.005
[.505
]
-.000
5.54+-0.0008
34.93
[1.375]
Max.
20.32
[.800]
Max.
+.003
[.218
]
-.000
Maximum Panel Thickness 6.1 [.240]
Recommended Panel Cutout
Interchangeable
Dies for
PRO-CRIMPER
Hand Tool
Interchangeable
Dies for Hand
Tool 69710-1
& 626 Pneu.
Center
Contact
Plating
RG/U
Cable
Termination
Type
Body
Plating
Dim.
L
Dielectric
Style
Part No.
354940-1 or
PRO-CRIMPER
Adapter 679304-1
Head 318161-1
36.83
179, 179A,
179B, 161,
Hex Crimp
O Crimp
Gold
Gold
Nickel
Nickel
Polyethelene
Polyethelene
Commercial
Commercial
58425-2
—
—
5413590-8
5221221-5
1.450
187, 187A,
34.93
1.375
318451-2
BELDEN 9221
AT&T KS
19224 L2,
RD179
36.83
Hex Crimp
Hex Crimp
Gold
Gold
Nickel
Nickel
Polyethelene
Polyethelene
Commercial
Commercial
58425-2
58425-2
—
—
5413590-4
5413590-3
1.450
Double Braid
36.83
1.450
BELDEN 8218
140, 210, 62,
62A, 62B, 59,
59A, 59B,
BELDEN 9291,
9209, 9269
34.93
1.375
O Crimp
Gold
Nickel
Polyethelene
Commercial
58536-1
58248-2
5221221-2
BELDEN 8212,
9104, 9112, 9240,
9167, 9259, 9266,
Times FM-59
34.93
O Crimp
O Crimp
Gold
Gold
Nickel
Nickel
Polyethelene
Polyethelene
Commercial
Commercial
58536-1
58536-1
58248-2
—
5221221-7
5221221-1
1.375
(RG 59 Type with
20 AWG C.C.)
BELDEN 9114,
9248
34.93
1.375
AT&T is a trademark of AT&T Corporation.
BELDEN is a trademark of Belden Wire
and Cable Company.
Note: Part Numbers are RoHS compliant except:ꢀ Indicates non-RoHS compliant.
70
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued)
Bulkhead Solder Jacks
Front Mount
Accepts
.054 Dia.
Max. Wire
Accepts
.054 Dia.
Max. Wire
27.43
[1.083]
Max.
Max.
27.43
[ 1.083]
Plating
Body—Nickel
Center Contact —Silver
3/8-32 Thread
3/8-32 Thread
9.75/9.65
[.384./380]
Dia.
13.09 Dia.
[.515] Max.
13.09 Dia.
[.515] Max.
Part No. 5415187-1
(without Solder Terminal)
Part No. 5221244-1
4.04/3.96
[.159/.156]
(with Solder Terminal)
Maximum Panel Thickness 3.18 [.125]
Note: If insulating bushing required
use part no. 227223-1 or 221951-1
(for details, reference page 55).
Note: If insulating bushing required
use part no. 227223-1 or 221951-1
(for details, reference page 55).
Recommended Panel Cutout
Bulkhead Jack
PC Board Mount
3.30
[.130]
± 0.1
Ø 12.70
[.500
11.07
[.436]
± .004
]
Max.
20.8
[.820]
± 0.1
11.2
[.441
± .004
]
Part No. 6274086-1
Accepts .
.050 Dia.
Max. WIre
Bulkhead Solder Jack
Rear Mount
Lockwasher and Jam Nut see page 73.
12.83+-0.1003
[.505
Dia.
+.005
-.000
17.78 Dia.
[.700] Max.
]
1/2-28 Thread
Plating
Body—Nickel
Center Contact —Gold
5.54+-0.0008
Dielectric
—Polymethylpentene
+.003
[.218
]
31.75
[ 1.250]
-.000
Max.
Maximum Panel Thickness 6.35 [.250]
Recommended Panel Cutout
Part No. 5414217-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
71
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued)
VALOX Body
Metal Body
Right-Angle Jacks
PC Board/Panel Mount
1/2-28 Threads
1/2-28 Threads
C
C
Mtg. Hgt.
Mtg. Hgt.
Outer Shell —Nickel
Dielectric —Polymethylpentene
Lockwasher and Jam Nut see page 73.
C
C
L
A
L
A
B
34.93
B
34.93
[1.375]
[1.375]
12.83+-0.1003
Part No.
Center
Contact
Plating
Dimensions
Body
Material
Dia.
+.005
[.505
]
Without
With
-.000
A
B
C
L
Mounting Posts Mounting Posts
VALOX, Black w/
Compliant Posts
(Economy)*
*
—
6.17 21.21 11.68 2.79
.243 .835 .460 .110
Gold3
5415105-2
VALOX,
Black
*
6.17 21.21 11.68 4.01
.243 .835 .460 .158
Gold3
Gold1
Gold1
—
5415105-1
5413194-1
5415634-2
L
5.54+-0.1003
(Economy)*
+.005
[.218
]
VALOX,
White
6.91 21.21 13.88 3.48
.272 .835 .519 .137
-.000
—
Maximum Panel Thickness 6.1 [.240]
VALOX,
White
(Economy)*
*
—
6.91 21.21 13.88 3.48
.272 .835 .519 .137
Recommended Panel Cutout
VALOX,
Black
6.91 21.21 13.88 3.48
.272 .835 .519 .137
Gold1
Gold1
Gold1
Gold2
Gold1
Gold1
Gold1
Gold1
Tin
—
5413194-2
5415634-1
5415633-1
5414459-1
5222092-1
—
6.91 21.21 13.88 3.48
.272 .835 .519 .137
—
VALOX,
Black
(Economy)*
8.59 21.21 15.88 3.48
.338 .835 .625 .137
Recommended PC Board Layouts
—
VALOX,
White
8.59 21.21 15.88 3.48
.338 .835 .625 .137
—
Without Mounting Posts
8.25 20.83 15.88 2.16
±0.08
2.64 [.104] Dia.
Clearance Hole for
2-56 Self-Tapping Screw*
(2 Holes)
10.16
[.400
Metal
Metal
—
.325
8.25 20.83 15.88
.325 .820 .625
.820
.625
.085
±.003
]
—
5222093-1
±0.05
5.08
[.200
±.002
Metal
(Economy)*
8.25 20.83 15.88 3.48
.325 .820 .625 .137
]
—
5414409-1
5415417-1
5415419-1
5222092-3
5414907-1
—
±0.05
5.08
[.200
Mating
Face
±.002
6.91 20.83 12.70 3.48
.272 .820 .500 .137
]
Metal with
Compliant
Posts
—
±0.08
G
S
0.89
[.035
±.003
8.56 21.21 15.88 3.48
.337 .835 .625 .137
]
—
(Economy)*
±0.05
2.54
[.100
±.002
]
(Top View)
8.25 20.83 15.88 3.48
.325 .820 .625 .137
Metal
Metal
Metal
Gold1
Gold1
Gold1
Gold1
—
—
6.91 20.83 12.70 3.48
.272
6.91 20.83 12.70
.272 .820 .500
.820
.500
.137
With Mounting Posts
—
6274072-1
—
±0.08
10.16
[.400
±0.08
2.01
.079
±.003
]
±.003
Metal
(Economy)*
6.91 20.83 12.70 3.48
.272 .820 .500 .137
]
6274084-1
(2 Holes)
±0.05
5.08
[.200
**Economy connector uses 50 Ω part with smaller dielectric and stamped and formed con-
tact, Phosphor Bronze contact material (Compare to regular connector which is 75 Ω,
screw machined Beryllium Copper).
Plating:
Gold1—0.00076 [.000030] thick
Gold2—0.00127 [.000050] thick
Note: If an Insulating Bushing is required see part number 330620 and Panel Cutout on
page 54.
±.002
]
±0.05
5.08
[.200
Mating
Face
±.002
]
G
S
±0.08
0.89
[.035
±.003
]
±0.05
2.54
[.100
±.002
]
(Top View)
* Screw for panel thickness of 2.38
[3/32] or greater
* Part No. 221108-2.
* Screw for panel thickness of less
than 2.38 [3/32]
* Part No. 221108-4.
VALOX is a trademark of General Electric
Company.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
72
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued)
VALOX Body
Metal Body
Vertical Jacks
PC Board/Panel Mount
L
L
Plating
1/2-28 Thread
1/2-28 Thread
15.88
[.625]
15.88
[.625]
Outer Shell —Nickel
Dielectric —Polymethylpentene
B
B
34.93
[1.375]
34.93
[1.375]
Mtg. Hgt.
Mtg. Hgt.
12.83+-0.1003
Dia.
+.005
Body
Material
Contact
Plating
Dim.
B
Dim.
L
[.505
]
Part No.
-.000
VALOX,
Black
21.21
3.48
Gold1
Gold1
5415632-1
5415632-2
.835
.137
(Economy)*
VALOX,
White
(Economy)*
21.21
.835
3.48
.137
+0.13
5.54 -0.00
+.005
20.83
3.48
[.218
]
Metal
Gold1
Tin
5222132-1
5415520-1
-.000
.820
.137
Maximum Panel Thickness 6.1 [.240]
Metal
(Economy)*
21.21
.835
3.48
.137
Recommended Panel Cutout
*Economy connector uses 50 Ω part with smaller dielectric and stamped and
formed contact, Phosphor Bronze contact material (Compare to regular
connector which is 75 Ω, screw machined Beryllium Copper).
Plating:
Gold1—0.00076 [.000030] thick
Note: If an Insulating Bushing is required see part number 330620 and
Panel Cutout on page 54.
Lockwasher and Jam Nut
Part No.
1-329632-2
Part No.
1-329631-2
±0.08
2.01
[.079
(2 Holes)
±0.05
5.08
[.200
±.003
]
±.002
]
±0.05
5.08
[.200
±.002
]
±0.05
2.54
[.100
±.002
]
* Screw for panel thickness of 2.38
[3/32] or greater
* Part No. 221108-2.
* Screw for panel thickness of less
than 2.38 [3/32]
±0.08
10.16
[.400
±.003
]
±0.08
0.89
[.035
G
10.16
[.400
S
±.003
]
±0.08
±.003
]
* Part No. 221108-4.
(Top View)
Recommended PC Board Layout
VALOX is a trademark of General Electric
Company.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
73
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued)
Style A
Style B
Style C
Vertical Metalized Jacks
PC Board Mount
L
L
L
Plating
Dielectric — TEFLON
17.45
[.687]
Sq.
20.57
[.810]
16.64
[.655]
15.88
[.625]
±0.08
±0.08
6.88
[.271
12.7
[.500
±0.05
6.88
±.003
]
±.003
]
±.003
[.271
]
±0.08
2.44
[.096
Dia.
±0.05
6.35
[.250
±0.08
±.003
3.44
[.135
]
±0.08
1.50
[.059
±.002
±0.05
]
±.003
3.43
]
(4 Holes)
±.003
] Dia.
±.002
[.135
]
(4 Holes)
±0.05
±0.08
6.88
[.271
6.88
[.271
±0.08
12.7
[.500
±.003
]
±.003
]
±0.08
1.32
[.052
±.003
]
Dia.
±.003
]
±0.05
±0.08
6.35
[.250
3.43
[.135
±0.08
1.02
[.040
Drill Holes for
±.002
±.003
]
Dia.
]
±.003
±0.05
± .002
]
0.94
[.037
]
Dia. Pin (5 Places)
Recommended PC Board Layout
Center
Body
Leg
Contact
Plating
Style
Length
L
Part No.
Style F (Push-On)
Plating
Nickel
Tin
± 0.08
5.16
[.203
3.30
.130
± .003
]
Gold
Gold
Gold
Gold
Silver
Gold
B
B
B
C
A
F
6274291-2
6274291-1
6274359-1
5414394-1
5413986-1
6274360-1
± 0.076
2.578
[.1015
± .0030
]
3.30
.130
± 0.08
± .003
1.02
[.040
Dia.
6.35
.250
]
Tin
14.73
[.580]
4.44
.175
Tin
± 0.08
5.16
[.203
± 0.05
± .002
2.06
[.081
Dia.
] 4 Plcs.
± .003
]
6.35
.250
2.54
Nickel
Tin
5 Plcs.
[.100]
2.54
.100
±0.1
6.88
[.271
Press Fit
Vertical Metalized Jacks
PC Board Mount
+.003
–.004
]
±0.1
11.49 Dia.
[.470] Max.
1.5
[.059
Dia.
+.004
–.003
]
±0.05
3.43
[.135
(4 Plated-Thru
Holes)
±.002
]
Dim.
A
Part
No.
±0.05
6.88
[.271
20.57
.810
5222462-1
5414088-1
±.002
]
16.26
.640
±0.08
1.02
[.040
A Max.
Dia.
±.003
]
(Plated-Thru Hole)
Recommended PC Board Layout
Insulating Bushing
11.94
[.470]
Dia.
14.61
[.575]
Dia.
Material—Nylon
Part No. 222163-1
Only to be used on Part Nos.
5222462-1 and 5222006-1
2.96
[.115]
Max.
6.61
[.260]
Max.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
74
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued)
Press Fit
±0.05
1.7
[.067
(2 Places)
For Drive Screw
Dia.
±.002
]
±0.05
Vertical Metalized Jacks
12.7
[.500
±.002
]
17.48
[.688]
PC Board Thickness (Min.)
Part No.
PC Board Mount
Sq.
±0.05
2.36
.093
6.35
[.250
(Continued)
5221336-3
±.002
]
3.17
.125
±0.08
1.02
5221336-4
±.003
[.040
]
±0.05
12.7
[.500
(Plated-Thru
Hole 3 Places)
±.002
]
15.88
[.625]
Max.
±0.05
6.35
[.250
±.002
]
Recommended PC Board Layout
6.88
[.271]
Press Fit, Bulkhead
± 0.51
4.37
[.172
10.80
[.425]
Vertical Metalized Jack
± .020
]
3.43
[.135]
3.43
[.135]
5 Plcs.
+ 0.13
ø 12.83
includes hardware
– 0.00
+ .005
– .000
[ø .505
]
28.78
[1.133]
24.41
+ 0.08
5.54
[.961]
– 0.00
6.88
[.271]
+ .003
– .000
[.218
]
± 0.08
Ø 1.02
[.040
± .003
]
Holes Plated
Through 5 Plcs.
Part No. 6274124-2
Recommended
PC Board Layout
Right-Angle Metalized Jacks
PC Board Mount
10.97
[.432]
Mounting
Height
Center
Contact
Dimension
Body
Plating
Contact
Plating
Part No.
Dielectric
Nickel
Tin
TPX
TEFLON
TPX
Gold2
Gold2
Gold2
Gold1
.171 [.007]
.171 [.007]
.131 [.005]
.171 [.007]
5413558-1
5413558-2
5413558-3
5413558-5
Nickel
Nickel
± 0.08
6.6
TPX
C
6.15
[.242]
± .003
]
L
[.260
28.4
[1.118]
Max.
Gold1—0.00076 [.000030] thick
Gold2—0.00127 [.000050] thick
± 0.08
± 0.08
3.3
2.11
[.083
± .003
± .003
[.130
]
]
Dia.
(4 holes)
± 0.08
6.6
± 0.08
± .003
1.17
[.046
[.260
]
Dia.
± .003
]
Maximum PC Board Thickness 2.54 [.100]
Recommended PC Board Layout
± 0.43
11.43
[.450
± .017
]
± 0.08
± .003
3.81
[.150
± 0.18
1.19
[.047
Dia.
]
± .007
]
± 0.08
7.62
[.300
11.07
[.436]
17.78
[.700]
Max.
21.84
[.860]
± .003
]
± 0.38
± 0.08
± .003
25.40
[1.000
1.78
[.070
± 0.08
± .003
Dia.
7.62
[.300
± .015
]
]
]
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
TPX is a trademark of Mitsui Chemicals
America, Inc.
Part No. 6274127-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
75
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued)
+0.13
-0.00
+.005
-.000
± 0.51
12.83
27.64
[1.088
Right-Angle Metalized
Jacks
PC Board/Panel Mount
±.020
]
[.505
]
Dia.
± 0.25
±.010
6.15
[.242
]
± 0.18
10.97
[.432
11.66
[.459]
±.007
]
+0.08
-0.00
+.003
-.000
5.64
[.222
]
1/2-28 Thread
4.34
Maximum Panel Thickness 6.35 [.250]
[.171]
Recommended Panel Cutout
Body
Dielectric
Part No.
6274425-2
Plating
Tin
TEFLON
Bulkhead Jack-Jack
Adapter
Right-Angle Adapter
(Jack-Plug)
Plating
Plating
Body— Nickel
Body—Nickel
Center Contact —Gold
Dielectric —Polymethylpentene
Center Contact —Gold
Dielectric —
14.53 Dia.
[.572] Max.
+0.13
12.83
Polymethylpentene
-0.00
+.005
[.505
]
-.000
Dia.
22.89
[.901]
Max.
+0.08
-0.00
5.54
36.07
[1.420]
+.003
]
[.218
11/16
26.97
[1.062]
-.000
Maximum Panel Thickness 6.35 [.250]
Recommended Panel Cutout
Part No. 5222117-1
Part No. 5415020-1
Bulkhead Jack-Jack
Adapter
Jack-Jack Adapter
Plating
Plating
Body — Nickel
Center Contact — Gold
Dielectric — Polymethylpentene
Body — Nickel
Center Contact — Gold
Dielectric — Polymethylpentene
36.04
Max.
+0.13
36.07
[1.420]
12.83
Max.
-0.00
[1.419]
+.005
[.505
]
-.000
Dia.
± 0.25
Ø 15.88
[.625
± .010
]
+0.08
-0.00
+.003
-.000
5.54
[.218
]
Recommended
Panel Cutout
Part No. 415567-1
Part No. 1274935-1
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
76
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued)
Bulkhead Jack-Push On Plug
Adapter
+ 0.13
– 0.00
+ .005
– .000
Ø 9.65
Ø 8.43
[.332]
]
Max.
[.380
± 0.13
8.89
[.350
± .005
]
41.92
[1.650]
Ø 14.35
[.565]
Max.
Recommended Panel Cutout
Part No. 1274007-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
77
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Mini BNC Connectors, 75 Ohm
Material and Finish
Shells, Bodies, Mtg Nuts — Brass,
nickel plated
Washers — Stainless Steel, nickel
plated
Ferrule — Copper or Brass, tin plated
Product Facts
■ Bayonet locking coupling
mechanism
■ 40% more interconnects in
the same area
Center Contacts — Phos Bronze and
■ Compatible with
Brass, gold plated
TROMPETER tooling
Dielectrics — PTFE
■ Ideal for telecommunica-
tions and broadband
applications
Electrical Characteristics
Frequency — DC – 2 GHz
Nominal Impedance — 75 ohms
Voltage Rating — 300 Volts (VRMS
maximum) @ Sea Level
VSWR —
Tyco Electronics introduces
the Mini BNC series of
RF connectors to meet the
growing demand for next
generation telecommunica-
tions and broadband
applications where higher
connector densities are
needed. Preserving the
characteristics that have
made the standard BNC
so popular, the Mini BNC
offers the same high per-
formance currently found in
standard Tyco Electronics
BNC series, but offers 40%
more interconnects in the
same area.
threaded interfaces. It uses
1.10 max to 500 MHz
(Return Loss -26.4 dB)
1.16 max to 1 GHz
(Return Loss -22.6 dB)
standard BNC installation
tooling meaning there is no
need for retraining of field
telco installers, and it uti-
lizes the same PCB footprint
on the jack side, providing a
drop in replacement for DS3
telco applications.
Insulation Resistance —
1,000 megohms minimum
Dielectric Withstanding Voltage —
1,000 Volts (VRMS maximum) @
Sea Level
Contact Resistance —
12 milliohms maximum
Mini BNC connector config-
urations currently available
include PCB, panel mount,
and flexible cable. Other
options can be reviewed as
well, including additional
cable sizes, adapters, PCB
surface mounting, and tape
and reel packaging. Call
your local sales office or
authorized distributor for
additional information or
samples of the Mini BNC
connector series.
Mechanical Characteristics
Connector Durability —
500 mating cycles
Force to Engage —
7 pounds maximum
Force to Disengage —
1 pound minimum
Center Contact Retention —
2 pounds minimum
Cable Retention —
20 pounds minimum
Vibration — EIA-364-28,
Test Condition VII, Condition D
Shock — EIA-364-27, Method H
The Mini BNC offering is
an excellent fit for 75 Ohm
systems, offering 500 mat-
ing cycles, electrical per-
formance through 2 GHz,
and is completely inter-
mateable with competitive
miniature BNC offerings.
Tyco Electronics’ Mini BNC
product offers the same
advantage of the bayonet
locking mechanism as our
standard BNC, allowing
quicker connect and dis-
connects than standard
Tyco Electronics is a
leading supplier of RF and
Microwave connectors and
cable assemblies, and pro-
vides advanced technology
products from well known
and industry leading
Environmental Characteristics
Temperature Rating —
–40 to +85°C
Moisture Resistance — EIA-364-31,
Method II, Condition C
Thermal Shock — EIA-364-32
brands, including AMP
and M/A-COM.
Note: Performance specifications
are typical, but may not apply to all
connector types.
Related Product Data
Product Specification — 108-2159
Sample Kit — 1773042
32.89
[1.29]
27.52
[1.08]
Ref.
Ref.
TROMPETER is a trademark of
Trompeter Electronics, Inc.
BNC
Mini BNC
78
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Mini BNC Connectors, 75 Ohm (Continued)
K
Interface Dimensions
Mini BNC Jack
Ø H
J
Reference
Plane
Ø A
Ø B
Ø C
Ø D Ø E
L
G
F
M
Dimensions
A
B
C
D
E
F
G
H
J
K
L
M
8.89–9.14 7.37–7.62 7.11–7.21 6.63–6.73 6.20–6.30 5.03–5.13 4.39–4.50 1.32–1.42 3.86–4.27 7.70
.350–.360 .290–.300 .280–.284 .261–.265 .244–.248 .198–.202 .173–.177 .052–.056 .152–.168 .303
0.18–0.30 4.01
.007–.012 .158
Min.
Min.
Mini BNC Plug
E
Reference
Plane
S°
G
Ø C
K
Ø B Ø A
Ø D Ø T
Ø H
M
F
P
R° Typ.
L
Ø N Typ.
Q Ref.
J
Q
Contact Types
Dimensions
E
A
B
C
D
F
G
H
J
7.70–7.80
.303–.307
0.71–0.76
.028–.030
11.43–11.68
.450–.460
4.27–4.93
.168–.194
0.94–1.35
.037–.053
1.57–1.68
.062–.066
9.60–9.70
.378–.382
2.50–2.59
.098–.102
—
Dimensions
P
K
L
M
N
Q
R
S
T
1.57–1.68
.062–.066
0.64–0.74
.025–.029
1.47–1.57
.058–.062
0.20–0.30
.008–.012
4.62–4.93
.182–.194
2.84–3.38
.112–.133
6.20–6.30
.244–.248
29°–31°
14°–16°
79
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Mini BNC Connectors, 75 Ohm (Continued)
Flexible Cable — Crimp
Attachment
27.69
Max.
Straight Cable Plug
[1.090]
Cable
735A
Part Number
1274563-1
1274563-2
1274563-3
734A
Ø 11.56
[.455]
RG 179
22.73
Max.
Right-Angle Cable Plug
[.895]
Cable
735A
Part Number
1274566-1
1274566-2
1274566-3
Ø 11.56
[.455]
734A
RG 179
23.89
[.940]
Max.
Bulkhead Cable Jack
26.92
[1.060]
Max.
13.46
[.530]
0.51
[.020]
R 4.83
[1.90]
4.06
[.160]
Recommended Panel Cutout
Tolerance: ± 0.08 [.003]
7.82
[.308]
3/8 - 32 UNEF-2A
Cable
735A
Part Number
1274568-1
1274568-2
1274568-3
734A
RG 179
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
80
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Mini BNC Connectors, 75 Ohm (Continued)
7.54
[.297]
15.44
[.608]
Printed Circuit Board
Straight Jack Receptacle
Sq.
0.76 Sq.
[.030] Typ.
Ø 0.97
[.038]
3.99
[.157]
Typ.
Part Number
1274571-1
15.37
[.605]
Right-Angle Jack Receptacle
10.62
[.418]
6.58
[.259]
0.76 Typ.
[.030] Sq.
7.54
[.297]
Part Number
1274572-1
Sq.
3.99
[.157]
Typ.
Ø 0.97
[.038]
Right-Angle Bulkhead Jack
Receptacle
22.45
[.884]
4.69
[.185]
7.54
[.297]
Ø 10.92
[.430]
8.53
[.336]
3.81
[.150]
8.48
[.334]
0.76
[.030]
3/8 - 32 UNEF-2A
Sq. Typ.
Part Number
1274584-1
Ø 0.97
[.038]
3.99
[.157]
Typ.
2 Position, Right-Angle,
Bulkhead Jack Receptacle
9.50
[.374]
2.54
[.100]
13.59
[.535]
12.70
[.500]
Ø 7.49
[.295]
24.10
[.949]
Typ.
Ø 1.27
[.050]
Typ.
7.65
[.301]
24.21
[.953]
Description
Part Number
1274663-2
With
Hardware
Without
Hardware
1274684-1
0.51
[.020]
Typ.
3.94
[.155]
Typ.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
81
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Decoupled Connectors
Product Facts
■ Built-in chip capacitors
filter high-frequency noise
to panel ground
■ PC board mounting with
vertical and standard or
low-profile right-angle
configurations
■ Cable mount bulkhead BNC
version available
■ Drop-in replacement for
Tyco Electronics standard
BNC printed circuit board
connectors
■ One-piece design and
robotic capacity to reduce
assembly time
Tyco Electronics capaci-
The typical way to handle
path between the capaci-
tors and panel. As a result,
high-frequency noise is
effectively shunted to
ground, while the DC path
is blocked.
tively decoupled connectors such EMI and ground loop
provide the fast, better way
to reduce noise and reduce
ground loops on coaxial
interconnections. The high- a ceramic disk capacitor
frequency noise generated between the cable shield
by fast rise times can cause and the panel. The capaci-
both false triggering of tor shunts high-frequency
circuits as well as emissions noise to ground. While
that can be radiated or
conducted outside the
equipment. Such emissions expensive.
can interfere with nearby
equipment. Ground loops
are also a problem for net-
worked systems. Ground
loops are caused when two
interconnected units are at
different voltage potentials.
problems is to decouple
the cable shield from the
ground panel by soldering
The connectors offer com-
patibility in design and
manufacture. The same
footprint and dimensional
envelope make them a
drop-in replacement for
Tyco Electronics standard
effective, this approach
is time consuming and
The Capacitively Decoupled BNC or TNC printed circuit
connector has built-in chip
capacitors. These capaci-
tors establish the electrical
contact between the outer
shield and a clip. This clip
provides a short electrical
board connectors. In addi-
tion, they can be robotically
picked and placed for high-
speed automated assembly
to pc boards.
Product Specification
108-1263 — BNC Decoupled PCB
Press-Fit Connection
108-1269 — BNC Decoupled PCB
Connectors
108-1490 — BNC Decoupled Cable
Mount
82
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
specified. Values in brackets
are standard equivalents.
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Decoupled Connectors (Continued)
Style A
Vertical BNC
PC Board/Panel Mount
Jacks Decoupled to Panel
15.08
[.625]
Material
Body—VALOX, black
Dielectric —Polymethylpentene
20.96
[.825]
34.93
[1.375]
Note: Both styles are shown with a
standard clip. See next page for
other clip styles.
For height dimensions see chart on
page 85.
±0.08
±0.05
2.01
[.079
5.08
[.200
±.003
]
(2 Holes)
±.002
]
+0.13
-0.00
+.005
-.000
12.83
±0.05
±.002
5.08
[.200
[.505
]
]
±0.05
2.54
[.100
Dia.
±.002
]
±0.08
10.16
[.400
±.003
]
±0.08
0.89
[.035
G
10.16
[.400
S
±.003
]
±0.08
±.003
]
+0.08
-0.00
+.003
-.000
5.54
[.218
]
(Top View)
Maximum Panel Thickness 6.1 [.240]
Recommended Panel Cutout
Recommended PC Board Layout
Style B
Right-Angle BNC
B
C
L
20.96
[.825]
A
34.93
[1.375]
±0.08
10.16
+0.13
-0.00
+.005
-.000
±0.08
2.01
12.83
±.003
.079
(2 Holes)
]
[.505
]
Dia.
±0.05
5.08
±.002
[.200
]
±0.05
5.08
[.200
Mating
Face
±.002
]
0.89
[.035
G
S
±0.05
2.54
[.100
+0.08
-0.00
+.003
-.000
5.54
±.003
]
±.002
]
[.218
]
(Top View)
Maximum Panel Thickness 6.1 [.240]
Recommended Panel Cutout
Recommended PC Board Layout
VALOX is a trademark of General Electric
Company.
83
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
specified. Values in brackets
are standard equivalents.
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Decoupled Connectors (Continued)
Clip Styles
19.30 Max.
[.760] Clip Width
14.76 Clip
[.581] Width
20.96
20.96
[.825]
[.825]
Standard
Flush
For closer centerline-to-centerline connector spacing
.304
[.012]
.304
[.012]
2.54
[.100]
Max.
2.54
[.100]
Max.
Recommended
Panel Mount
Recommended
Panel Mount
Shortening
Bar
20.96
[.825]
20.96
[.825]
Extended
For use with or without a jam nut
Short Electrical Path
For reduced series inductance in ground path
84
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Decoupled Connectors (Continued)
Mounting Post Styles
PC Board/Panel Mount
Jacks Decoupled to Panel
(Continued)
L
L
Standard
Compliant
BNC
L
Capacitance/
Voltage
Mounting
Post
Part
No.
Description
Clip
Mounting
Post Length
B*
A*
Style1
Vertical
9400pF
3.48
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Compliant
—
—
—
A
B
B
B
B
B
B
B
B
5413476-2
5413524-2
5413524-5
5414215-1
5413515-2
5413515-3
5413515-7
5413515-8
5413515-9
50ꢀ
1500VDC
.137
9400pF
1500VDC
4.01
.158
15.88
.625
8.59
.338
Standard
Right-Angle
50ꢀ
9400pF
1500VDC
2.79
.110
15.88
.625
8.59
.338
Standard Right-Angle
9400pF
1500VDC
15.88
.625
8.59
.338
—
W/O Mounting Post 50ꢀ2
9400pF
1500VDC
4.01
.158
13.18
.519
6.91
.272
Standard
Standard
Compliant
Compliant
Compliant
20000pF
500VDC
4.01
.158
13.18
.519
6.91
.272
Low Profile
Right-Angle
50ꢀ
7900pF
1600VDC
2.79
.110
13.18
.519
6.91
.272
9400pF
1500VDC
4.70
.185
13.18
.519
6.91
.272
9400pF
1500VDC
2.79
.110
13.18
.519
6.91
.272
Low Profile Right-
Angle W/Special Clip
& High Temperature
Housing 50ꢀ
9400pF
2.79
13.18
6.91
Extended
Flush
Compliant
Compliant
B
B
5414284-2
5414352-1
500VDC
.110
.519
.272
Low Profile
Right-Angle
W/High Temperature
Housing 50ꢀ
9400pF
500VDC
4.70
.185
13.18
.519
6.91
.272
Low Profile
9400pF
4.01
13.18
Standard
Standard
Standard
Standard
Standard
Compliant
—
B
5414094-2
5415103-1
5415103-2
Right-Angle 75ꢀ
1500VDC
.158
.519
9400pF
1500VDC
4.01
.158
6.17
.243
11.68
.460
—
—
Ultra Low Profile
Right-Angle
75 ꢀ
9400pF
1500VDC
2.79
.110
6.17
.243
11.68
.460
1See pages 83 and 84 for Connector Styles.
2See customer drawing for PC Board Layout.
*See page 83 for dimension reference.
Note: Part Numbers are RoHS compliant except:ꢀ Indicates non-RoHS compliant.
85
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Decoupled Connectors (Continued)
Right-Angle BNC Jack
PC Board/Panel Mount
Decoupled to Panel
ESD Protected
ESD
Protection
ESD Device
See page 83 Style B for panel
cutout and recommended PC board
configuration.
1/2-28 Thread
Note: See Tyco Electronics Customer drawing for voltage breakdown rating.
L
Capacitance/
Voltage
Contact
Plating
Mounting
Post
Part
No.
Description
50ꢀ Product
Clip
Mounting
B*
A*
Post Length
Low Profile
Right-Angle
W/ ESD Protection
7900pF
1500VDC
2.79
.110
13.18
.519
6.91
.272
Gold1
Standard
Compliant
5414651-3
75ꢀ Product
Standard
Right-Angle
9400pF
4.01
15.88
8.59
Gold1
Gold1
Standard
Flush
Standard
5415085-1
5415216-1
1500VDC
.158
.625
.338
W/ ESD Protection
Low Profile
Right-Angle
ESD Protected
9400pF
1500VDC
2.79
.110
13.18
.519
6.91
.272
Compliant
*See page 83 for dimension reference.
Right-Angle BNC Jack
PC Board/Panel Mount
Decoupled to Board
ESD Protected
13.18
[.519]
Capacitance
9400pF
Voltage
1500VDC
ESD
Device
Compliant
Board Lock
Part No. 5415205-1
± 0.08
2.01
[.079
± 0.08
10.16
[.400
± .003
+ 0.13
- 0.00
]
12.83
± .003
]
Dia.
2 Holes
+ .005
- .000
[.505
Dia.
]
± 0.08
± .003
0.89
[.035
]
+ 0.13
- 0.00
Dia.
11.13
2 Holes
+ .005
- .000
[.438
]
± 0.05
± 0.05
± .002
5.08
[.200
2.54
[.100
± .002
]
]
Recommended PC Board Layout
Recommended Panel Cutout
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
86
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Decoupled Connectors (Continued)
Press-Fit, Vertical BNC
Jacks, PC Board Mount
Decoupled to Board
17.48
Sq.
12.70
[.500]
±0.08
1.02
[.040
Dia.
[.688]
±.003
]
6.35
[.250]
3 Plc.
Plated Thru Hole
Material
12.70
[.500]
1.70
[.067]
2 Plc.
Dia.
Dielectric—TEFLON
Isolation Pad —Polyester
Plated Thru Hole
For Drive Screw
Plating
6.35
Body—Nickel
[.250]
15.88
Max.
Ground Clip —Nickel
Center Contact —Gold
Action Pin Legs —Gold
[.625]
9.14 [.360] Dia. OD
6.35 [.250] Dia. ID
Ground Area
Recommended PC Board Layout
Part No. 5414553-1 50 Ohm
Part No. 5414493-4 75 Ohm
BNC Bulkhead Jacks,
Crimp
+0.13
12.83
40.64
Max.
-0.00
+.005
[.505
]
[1.600]
-.000
Dia.
+0.08
-0.00
+.003
-.000
5.54
[.218
]
16.51
[.650]
Max.
over
Recommended Panel Cutout
points
Interchangeable
Dies for Hand
Center
Contact
Plating
RG/U
Cable
Termination
Type
Body
Plating
Description
Dielectric
Style
Tool 69710-1
& 626 Pneu.
Part No.
Head 318161-1
50ꢀ
RG 58, 58A, 58B, 58C
RG 174, 174A, 316, 188, 188A
RG 174, 174A, 316, 188, 188A
RG 179, 187
Hex Crimp
Hex Crimp
Hex Crimp
Hex Crimp
Gold
Gold
Gold
Gold
Nickel
Nickel
Nickel
Nickel
Polymethylpentene
Polymethylpentene
Polymethylpentene
Polymethylpentene
Commercial
Commercial
Commercial
Commercial
58436-1
58436-3
58436-3
58425-2
5414758-1
5414758-2
5414758-3
5415779-1
50ꢀ
50ꢀ
75ꢀ ESD
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
Note: Part Numbers are RoHS compliant except:ꢀ Indicates non-RoHS compliant.
87
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Self-Terminating PC Board Connectors
Tyco Electronics Self-
Product Facts
Terminating printed circuit
board BNC connectors pro-
vide the capability to auto-
matically terminate an
■ Built-in chip resistor termi-
nates the signal line to the
proper characteristic imped-
ance when in the unmated
state
input-output port to the sys-
tem characteristic imped-
ance. This feature
■ Can be ordered with stan-
dard resistance values (50,
75 and 100 Ohms)
eliminates the need for
external terminators when
an I/O port is not being
used. The Self-Terminating
BNC jack contains a chip
resistor which bridges the
signal and ground paths
when the connector is not
mated to a BNC plug.
■ Fits into printed circuit
board footprint of standard
BNC PCB connectors
■ One-piece design is com-
patible with robotic inser-
tion and wave soldering
When mated, the resistor is
switched out of the circuit
for direct signal transmis-
sion to the board.
The footprint of this connec-
tor is compatible with stan-
dard BNC connectors,
14.73
[.580]
allowing it to be easily
installed into existing circuit
board designs and suitable
for robotic insertion for high
speed automated assembly
onto the PC board.
15.86
[.625]
The Self-Terminating BNC is
available in standard resist-
1/2-28UNEF-2A
ance values for use in net-
working and video systems.
Contact Tyco Electronics for
new designs that include
switching and capacitively
decoupled versions.
Material
Body—Polyester, PBT, black
Dielectric —Polyester, PBT, natural
Plating
34.96
[1.375]
Shell —Tin
Center Contact —Gold on mating end
and Tin on solder tails
20.96
[.825]
Termination
Resistance
Part
Number
Product
Self-Terminating BNC PCB
75Ω
5414367-2
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
88
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Twin BNC Connectors
The Twin BNC Connector
is a quick connect/discon-
nect, weatherproof connec-
tor designed in accordance
with MIL-C-39012 to meet
the stringent requirements
of MIL-STD-1553 Multiplex
Data Bus.
Product Facts
■ Crimp connectors require
only one-stroke crimping of
both conductors, plus braid
and cable support
■ Lower installed cost with
one-stroke crimp
■ Reduced noise levels
because of Tyco Electronics
solderless crimping tech-
niques
These twin coaxial
cable connectors are a
unique development by
Tyco Electronics which has
resulted in the production of
high level RF components.
Termination of these con-
nectors to twin conductor
cable is made with
■ Captive inner contact
stability
■ No danger of heat damage
to coaxial cable
Tyco Electronics exclusive
one crimp method which
simultaneously terminates
inner conductors, outer
braid and cable support
with one stroke of the
matching Tyco Electronics
tool.
■ Ease of inspection
■ Listed under the Component
Program of Underwriters
Laboratories Inc.,
Electrical Characteristics
Environmental Characteristics
R
File No. E81956
Nominal Impedance —Non-constant
Working Voltage—500 volts rms
sea level
Insulation Resistance —
5000 megohms min.
Dielectric Withstanding Voltage—
1500 volts rms sea level
Temperature Range —
-55°C to +85°C
Vibration — MIL-STD-202,
Method 204, Condition B
Shock —MIL-STD-202, Method 213,
Condition I, 100 G’s
Salt Spray — MIL-STD-202,
Method 101, Condition B
■ PC Board soldered connec-
tors are recognized under
the Component Program of
These rugged connectors
accommodate today’s most
commonly used twin con-
ductor cable sizes.
Underwriters
R
Laboratories Inc.,
File No. E81956
■ Certified by Canadian
Mechanical Characteristics
Mating/Unmating —
Bayonet lock-quick connect/ disconnect
Cable Attachment —Crimp type -
Simultaneous center and braid
Coupling Nut Retention — 100 lbs.
[444 N] min.
Temperature Cycling — MIL-STD-
202, Method 102, Condition C
Standards
Association
R
File No. LR 7189
Materials
Brass —QQ-B-626
Beryllium Copper —QQ-C-530
TEFLON—MIL-P-19468
Cable Retention —25 lbs.
[111 N] min., RG 108A/U cable
Polypropylene —General purpose
Copper, Annealed—QQ-C-576
Phosphor Bronze —QQ-B-750
Silicone Rubber —ZZ-R-765
Durability— 200 cycles per
MIL-C-39012
Plating
Silver—QQ-S-365
Nickel —QQ-N-290
Tin —ASTM-B-545
Packaging —All connectors are pack-
aged individually unless otherwise
noted.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
89
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
specified. Values in brackets
are standard equivalents.
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Twin BNC Connectors (Continued)
Plugs
33.74
[1.328]
Max.
14.61 Dia.
[.575] Max.
Center
Contact
Plating
RG/U
Cable
Body
Plating
Integral Die
Hand Tool
Dielectric
Part No.
Silver
Silver
Silver
Nickel
TEFLON
69667
69667
5332225
5332225-5
108, 108A
BELDEN 9272, 89272
Polypropylene
TROMPETER
TWC-124-2
Silver
Silver
Silver
Nickel
TEFLON
69667
69667
5332225-3
5332225-6
ROLM 49D2401
RAYCHEM 7824D013
Polypropylene
Bulkhead Jack
+0.13
12.83
[.505
-0.00
+.005
-.000
Dia.
]
+0.13
-0.00
+.005
11.05
[.435
]
-.000
H
38.1
Max.
[1.500]
Maximum Panel Thickness 3.18 [.125]
Recommended Panel Cutout
H = 17.45 [.687] Max. across flats, 20.32 [.800] Max. across points
Die Insert for
CERTI-CRIMP
Center
Contact
Plating
Tools: Hand
RG/U
Cable
Body
Plating
Hand Tool
Integral Die
Hand Tool
Dielectric
Tool-69710-1,
626 Pneu. Head
318161-1
Part No.
with
Integral Die
108, 108A
BELDEN 9272, 89272
Silver
Silver
TEFLON
-5—
69667
69708
5332342
BELDEN is a trademark of Belden Wire
and Cable Company.
ROLM is a trademark of the Rolm Corp.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
TROMPETER is a trademark of
Trompeter Electronics, Inc.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
90
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Twin BNC Connectors (Continued)
Right-Angle
+0.13
-0.00
+.005
-.000
PC Board/
15.88 Mtg.
[.625] Hgt.
12.83
[.505
Dia.
]
Panel Mount Jacks
Material
Body—VALOX, White
Center Contacts —Gold
Dielectric —Polymethylpentene
36.83
[1.450]
+0.08
-0.00
+.003
-.000
Max.
5.54
[.218
]
Maximum Panel Thickness 6.1 [.240]
Recommended Panel Cutout
With Mounting Posts
Part No. 5228686-1
±0.05
2.01
±.002
[.079
] Dia.
±0.08
10.16
[.400
(2 Holes)
±.003
]
±0.08
5.08
[.200
±0.08
6.35
[.250
±.003
]
±.003
]
±0.08
2.54
±.003
[.100
]
±0.05
1.6
[.063
±.002
]
±0.08
±0.08
3.2
[.126
0.89
[.035
±.003
±.003
]
] Dia.
(3 Holes)
Recommended PC Board Layout
+0.13
-0.00
+.005
-.000
12.83
[.505
Dia.
]
Vertical
PC Board/
Panel Mount Jacks
+0.08
-0.00
+.003
-.000
5.54
[.218
35.56 Mtg.
[1.400] Hgt.
Material
]
Body—VALOX, White
Center Contacts —Gold
Dielectric —Polymethylpentene
Maximum Panel Thickness 6.1 [.240]
Recommended Panel Cutout
With Mounting Posts
Part No. 5221198-1
±0.13
3.2
[.126
Lockwasher and Jam Nut
±.005
]
±0.05
1.6
[.063
±.002
]
±0.08
5.08
[.200
±.003
]
±0.08
10.16
[.400
±0.05
0.89
[.035
(3 Holes)
±0.08
2.54
[.100
±.003
]
±.002
±.003
] Dia.
]
Part No.
Part No.
1-329632-2
1-329631-2
±0.08
5.08
[.200
±0.05
2.01
[.079
±.003
]
±.002
] Dia.
±0.08
(2 Holes)
10.16
[.400
±.003
]
Recommended PC Board Layout
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
VALOX is a trademark of General Electric
Company.
91
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Twin BNC Connectors (Continued)
Vertical
PC Board Mount
Jack
±0.08
10.16
[.400
+0.13
±.003
]
12.83
[.505
-0.00
+.005
-.000
Dia.
]
±0.05
±.002
±0.08
±.003
2.01
[.079
5.08
[.200
Dia.
]
]
2 Plcs.
±0.05
0.89
[.035
Dia.
Plating
±.002
]
2 Plcs.
Body—Nickel
Center Contacts —Gold
Dielectric —Polymethylpentene
±0.08
±.003
1.17
[.046
Dia.
]
+0.08
-0.00
+.003
-.000
±0.08
±.003
5.54
[.218
3.48
[.137
±0.08
10.16
[.400
]
]
±.003
]
±0.13
±.005
3.20
[.126
]
Part No. 5415832-1
PCB Configuration
Recommended Panel Cutout
Bulkhead Jack
Adapter
+0.13
12.83
[.505
-0.00
Dia.
+.005
-.000
]
Plating
Body—Silver
Center Contacts —Silver
±0.08
11.05
[.435
35.72
[1.406]
±.003
]
Max.
H
Maximum Panel Thickness 3.18 [.125]
Recommended Panel Cutout
H = 17.45 [.687] Max. across flats, 20.32 [.800] Max. across points
Part No. 5332215
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
92
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
F Series and G Series Connectors
Product Facts
■ Designs meet SCTE
requirements where
applicable
■ Plugs, jacks and adapters
available
■ Board mount and cable
mount available
■ Surface mount connectors
available
■ Sealed product available
■ High current carrying
capabilities
Tyco Electronics F Series
connectors offer perform-
ance, which is driven by
evolving OEM requirements
and expectations. Improved
VSWR beyond 1 GHz, high
current carrying capability,
and pressure sealed prod-
ucts are now part of the
standard product offering.
Designs compliant with
ANSI/SCTE, Bellcore,
industry and agency stan-
need for soldering. Center
of gravity control and PCB
retention designs prevent
tipping and eliminate
dards are also available.
Both cable applied and
PCB terminated products
are offered in a variety of
styles. The cable connec-
tors are designed for fast,
accurate termination with
tools common to the
industry. Application cost
reductions can be achieved solutions demanded by
using Tyco Electronics PCB
terminated products; press-
fit designs eliminate the
fixturing during soldering.
Integral mechanical keys
and “D flats” prevent
rotation in panels.
These products provide the
highly reliable, cost-effective
today’s evolving marketplace.
UL/CSA, and various other
Product Specification
Instruction Sheets
108-1518 — Connector Coaxial,
F Series, RF, Single Crimp Plug
408-9221 — Coaxial Series F Plug
Connectors
108-1643 — Connector Coaxial,
F Series, RF, PCB Mounted
408-4402 — Series F & G Coaxial
Cable Bulkhead Jack Connector
108-1755 — Connector Economy,
F Series, RF Coaxial, PCB
408-4291 — PRO-CRIMPER II Hand
Tool Assembly 58622-1 and 58622-2
108-1757 — Connector, 15 amp,
G Series Jack, PCB
108-1758 — Connector, F Series Jack,
PCB, Surface Mount
108-1629 — Feedthrough, Sealed
F Port Jack
93
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
specified. Values in brackets
are standard equivalents.
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
F Series Connectors
Plugs
Crimp Style
A
Screw-On Style
B
Crimp Style, Hex
C
RG/U
Cable
Termination
Type
Body
Plating
“B”
Threads
PRO-CRIMPER†
Hand Tool Assembly
Style
Part No.
58425-3, 58436-2,
or 58621-2
6
6
Crimp
Nickel
Nickel
A
B
—
221539-2
221540-2
21.59
[.850]
Max.
Screw-On
M7x1
—
59
58425-3, 58436-2,
or 58621-2
BELDEN 9104,
9100*
Crimp
Crimp
Nickel
Nickel
C
C
—
—
414766-1
414766-8
58425-3, 58436-2,
or 58621-2
59
*NID to inside cable.
† 8.23 [.324] Hex Crimp.
Center
Contact
Plating
RG/U
Cable
Termination
Body
Plating
Termination
Tooling
Part No.
Type
Braid: M 22520/5-01 w/ DANIELS
Die Set Hx4-1637 (.128 Hex)
179
Headend
Patch Panel
5415226-1
Crimp
Tin
Nickel
Contact: M 22520/2-01 w/
DANIELS Positioner K727, Pos. 2
± 0.20
39.11
[1.540
Right-Angle Plugs, Crimp
± .008
]
± 0.20
10.50
[.413
± .008
]
9.40
[.370]
± 0.30
± .012
1.50
[.059
]
RG/U
Cable
Termination
Type
Center Contact
Plating
Body
Termination
Tooling
Part No.
887098-1
Plating
6
Crimp
Tin
Nickel
use .324 inch Hex
Std. Cable
BELDEN is a trademark of Belden Wire
and Cable Company.
DANIELS is a trademark of Daniels
Manufacturing Corporation.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
94
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
F Series Connectors (Continued)
Bulkhead Jacks, Crimp,
Rear Mount
RG/U
Cable
Center Contact
Plating
Body
Plating
Die Set
Part No.
Bright
Tin
179
Nickel
220210-1*
5415712-1
**Use with hand tool 354940-1
Bulkhead Jacks, Crimp,
Splash Resistant,
Front Mount
RG/U
Cable
Center Contact
Plating
Body
Die Set
Part No.
Plating
Bright
Tin
179
Nickel
220210-1**
5415569-2
**Use with hand tool 354940-1
± 0.08
4.11
[.162
+ 0.13
– 0.00
+ .005
– .000
Right-Angle
PC Board Mount
Jacks
± 0.08
9.65
± .003
2.50
[.098
]
Dia.
± .003
]
± 0.08
± .003
0.99
[.039
[.380
]
4 Plcs.
]
± 0.08
± .003
8.20
[.323
A
]
B
Recommended Panel Cutout
PC Board Layout
C
Body Plating
Dimensions
Center Contact
Plating
Part
No.
Barrel
Base
A
B
C
25.40
14.48
15.90
Nickel
Tin
Tin
Tin
5415302-1
5415302-2
1.00
.570
.626
31.75
1.250
14.48
.570
22.25
.876
Nickel
Tin
+ 0.13
± 0.08
4.11
[.162
8.89
– 0.00
± 0.08
± .003
± .003
2.50
[.098
]
+ 0.13
– 0.00
+ .005
– .000
+ .005
– .000
[.350
]
9.65
]
± 0.08
± .003
0.99
[.039
Dia.
4 Plcs.
[.380
]
]
A
B
± 0.08
± .003
8.20
[.323
]
C
Recommended Panel Cutout
PC Board Layout
Body Plating
Dimensions
Center Contact
Plating
Part
No.
Barrel
Base
A
B
C
*Connectors willl accept a center
conductor, diameter of 0.51-1.19
[.020-.047]
29.97
1.180
17.53
.690
12.19
.480
Nickel
Tin
Tin
5887078-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
95
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
F Series Connectors (Continued)
± 0.08
± .003
2.26
[.089
Right-Angle
PC Board Mount
Jacks (Continued)
± 0.08
± .003
0.99
[.039
+ 0.13
]
9.65
]
– 0.00
4 Plcs.
+ .005
– .000
Dia.
[.380
]
+ 0.13
– 0.00
+ .005
– .000
8.03
[.316
]
± 0.08
± .003
9.14
[.360
]
± 0.08
4.57
[.180
± .003
]
B
± 0.08
± .003
5.77
[.227
A
]
Recommended Panel Cutout
PC Board Layout
Body Plating
Dimensions
Center Contact
Plating
Part
No.
C
Barrel
Base
A
B
C
33.81
1.331
15.75
.620
19.86
.782
Nickel
Tin
Tin
5415276-2*
*Connector will accept center conductor diameter range of 0.56-1.19 [.022-.047].
± 0.08
4.11
[.162
+ 0.13
– 0.00
+ .005
– .000
Right-Angle
PC Board Mount Jack,
High Temperature
8.89
± 0.08
± .003
]
± .003
2.50
[.098
]
[.350
]
± 0.08
± .003
0.99
[.039
4 Plcs.
]
+ 0.13
– 0.00
9.65
± 0.08
± .003
8.20
[.323
+ .005
[.380
]
*High temperature versions use PTFE
dielectric (see table)
– .000
]
Dia.
Recommended Panel Cutout
PC Board Layout
A
B
Dielectric
Middle
Dimensions
Solder Post
Plating
Part
No.
C
Bottom
Front
A
B
C
35.61
16.89
26.11
Acetal
Acetal Polypropylene
Acetal Polypropylene
Nickel
Tin
5415024-1
5415024-3
5415214-1*
1.402
.665
1.028
35.61
1.402
16.89
.665
26.11
1.028
Acetal
PTFE
25.40
1.00
17.91
.705
14.99
.590
PTFE
PTFE
Tin
*Pin in paste reflow / high temperature processing.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
96
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
F Series Connectors (Continued)
15.88
[.625]
Surface Mount,
Straddle Jack
1.78
[.070]
9.40
[.370]
1.91
Typ.
[.075]
2 Plcs.
Contact will accept center conductor
diameter range 0.56–1.19 [.022–.047]
Center of gravity balanced for automated
pick and place and anti-tipping during
solder reflow process.
18.29
[.720]
R 1.27
[.050]
0.76
[.030]
Typ.
14.61
[.575]
12.95
[.510]
1.65
[.065]
13.21
[.520]
Part No. 5415322-2
Recommended PC Board Layout
± 0.08
4.32
[.170
9.50
[.374]
± 0.08
± .003
]
4 Plcs.
+ 0.13
– 0.00
+ .005
]
– .000
Vertical PC Board Mount
Jacks
2.77
[.109
± .003
9.65
]
Dia.
23.62
[.930]
[.380
± 0.08
1.22
[.048
± .003
]
Connector will accept a center conduc-
tor diameter of 0.56–1.19 [.022–.047]
± 0.08
± .003
8.64
[.340
]
16.0
[.630]
± 0.08
± .003
4.32
[.170
± 0.08
± .003
8.64
[.340
]
]
Part No. 5887046-1
Recommended Panel Cutout
PC Board Layout
8.64
[.340]
13.49
1.07
± 0.05
± .002
[.531]
[.042
]
4.32
[.170]
Typ.
4 Plcs.
2.36
[.093]
4 Plcs.
36.45
[1.43]
9.50
[.374]
Sq.
1.37
[.054]
8.64
Typ.
[.340]
± 0.08
8.64
[.340
Typ.
± .003
]
Part No. 6274020-1
4.32
[.170]
PC Board Layout
Jack to Jack
Feed through Adapter
Jack to Plug
Right-Angle Adapter
Adapters
Part No. 282938-2
Part No. 5887089-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
97
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
G Series Connectors
Bulkhead Jack, Crimp
RG/U
Cable
Termination
Type
Body
Plating
Part No.
179
Crimp
Nickel
5415683-1
Termination Tooling: Use 220210-1 die set for Contact only.
Use Certi-Crimp Hand Tool 220009-1 for ferrule.
9.73 – 9.58
[.383 – .377]
9.73 – 9.58
[.383 – .377]
Bulkhead Jack, PC Board
Connector will accept center conductor
diameter range 0.97–1.65 [.038–.065]
(415332-1 only)
8.15 – 8.00
[.321 –.315]
Part No. 5415332-1 (15 Amp)
Part No. 6274032-1
Recommended Panel Cutout
for 5415332-1
Recommended Panel Cutout
for 6274032-1
Jack, Bulkhead
PC Board
Connector will accept center conductor
diameter range 0.97–1.07 [.038–.042]
Part No. 5887000-1
± 0.08
0.89
[.035
Right-Angle
PC Board Mount Plug
± .003
]
± 0.08
1.93
[.076
± 0.08
± .003
1.37
[.054
± .003
]
]
4 Plcs.
Includes board retention feature to
prevent tipping during solder process.
± 0.08
± .003
4.57
[.180
]
± 0.08
± .003
9.14
[.360
]
± 0.08
10.29
[.405
Part No. 5415406-2
± .003
]
PC Board Layout
Vertical PC Board
Mount Plug
3.81
[.150]
2.03
[.080]
Typ.
Typ.
2.08
[.082]
4 Plcs.
7.62
[.300]
Typ.
7.62
[.300]
Typ.
1.27
[.050]
1.32
[.052]
Typ.
PC Board Layout
Part No. 6274045-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
98
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
G Series Connectors (Continued)
Adapters
F Jack to G Jack
Bulkhead Adapter
+ 0.13
– 0.00
+ .005
– .000
9.65
[.380
]
Dia.
Recommended Panel Cutout
Part No. 415327-1
11.30
[.445]
F Jack to G Plug
Bulkhead Adapter
Connector will accept center conductor
diameter range of 0.51–1.19
[.020–.047].
12.95
[.510]
Panel nut 887003-3 available for float
mounting.
Part No. 415523-1
Recommended Panel Cutout
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
99
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMA Connectors
Product Facts
■ Performance to 12.4 GHz
and beyond
■ Available in various base
metal options, including
stainless steel, brass and
zinc diecast
■ Uses industry standard
crimp tools and processes
■ Available with corrosion
resistant, non-magnetic
White Bronze plating
■ Meets all performance
requirements for
MIL-C-39012.
Tyco Electronics offers
a complete line of SMA
connectors designed for
performance to 18 GHz to
satisfy the growing demand
for SMA connectors in the
wireless communications
industry. The SMA product
line offers stainless steel
bodies, as well as non-
ferrous metals. Various
plating options are available,
including Gold and White
Bronze. The SMA interface
is fully compatible with
Mil-C-39012.
316 cable utilizing industry
standard HEX crimps.
flange mount panel jacks,
straight and right-angle pcb
mount jacks and various
between and in series
adapters. Numerous pack-
aging and testing options
are also available to meet
specific system criteria
as well.
The SMA series meets the
performance, quality and
application requirements
of the commercial market-
place. This includes White
Bronze plating, a unique
finish developed by
Tyco Electronics to address
the performance needs of
the telecommunications
Additionally, standard
military approved (QPL)
interfaces are offered as
market. This plating is highly well. Including connectors
resistant to wear, and con-
tains no ferrous metals, thus
displaying excellent inter-
modulation characteristics.
for semi-rigid cable and
micro strip applications.
The 3 Piece SMA offering
is designed especially
for applications in cellular
infrastructure where
InterModulation Products
(IMP) must be minimized.
By limiting non-linearities
within the connectors, IMP
is reduced and increased
channel capacity can be
offered.
While still offering various
options on military (QPL)
approved connectors,
Tyco Electronics has devel-
oped a complete offering
tailored to the commercial
Communications industry.
This includes 3 piece flexi-
ble cable products for pop-
ular RG 316, 142 and RD
To satisfy the broad range
of commercial applications,
SMA connectors are avail-
able in a broad range of
standard configurations
including; straight and
right-angle cable applied
plugs, bulkhead cable
jacks, two and four hole
Between Series Adapters
For SMA Between Series Adapters, see
pages 251-260.
100
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
specified. Values in brackets
are standard equivalents.
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMA Connectors (Continued)
Specifications
MIL-C-39012
Applicable Paragraph
General
Material
3.3
Steel corrosion resistant per ASTM-A-582 and ASTM-A-484, Type 303. Beryllium copper per
ASTM-B-196. PTFE Fluorocarbon per ASTM-D-1710.
Finish
3.3.1
Center contacts shall be gold plated to a min. thickness of .00127 [.00005] in accordance with
MIL-G-45204, ASTM-B-488. All other metal parts shall be finished as to provide a connector
which meets the corrosion requirements.
Design
3.4
The design shall be such that the outline shown in this catalog and the interface dimensions of
MIL-STD-348A are met.
Electrical
Insulation Resistance
3.11
3.22
3.17
3.23
3.16
3.14
The insulation resistance shall not be less than 10,000 megohms.
Refer to applicable military slash sheet, product drawing or spec.
Refer to applicable military slash sheet, product drawing or spec.
Refer to applicable military slash sheet, product drawing or spec.
Refer to applicable military slash sheet, product drawing or spec.
Corona Level
Dielectric Withstanding Voltage
RF High Potential
Contact Resistance
VSWR
Refer to applicable military slash sheet, product drawing or spec. Frequency range dependent on
cable used.
RF Leakage
Insertion Loss
3.26
3.27
Refer to applicable military slash sheet, product drawing or spec.
Refer to applicable military slash sheet, product drawing or spec. Frequency range dependent on
cable used.
Mechanical
Force to Engage
3.5.1
The torque required to engage and disengage shall not exceed 2 in.-lbs. The longitudinal force is
not applicable.
Coupling Nut Retention
Coupling Proof Torque
Cable Retention
3.25
3.6
60 lbs. min. Applicable for plug connectors only.
15 in.-lbs. min. Applicable for plug connectors only.
Refer to applicable military slash sheet or consult factory.
3.24
3.7
Mating Characteristics
Applicable to jack connectors only. Reference MIL-STD-348A for dimensions; oversize test pin
.953 [.0375] min. dia., .76 - 1.14 [.030-.045] deep, insertion force 3 lbs. max. with .940 [.0370]
min. dia. pin, withdrawal force 1 oz. min. with .902 [.0355] max. dia. pin.
Connector Durability
3.15
—
The connector to be tested and its mating connector shall be subjected to 500 insertion and
withdrawal cycles at 12 cycles per minute max. The connector shall show no evidence of
mechanical failure and shall meet the mating characteristic requirements.
Recommended Mating Torque
Environmental
7 to 10 in.-lbs.
Vibration
3.18
3.19
3.20
3.13
3.21
Specification MIL-STD-202, method 204, test condition D
Specification MIL-STD-202, method 213, test condition I
Refer to applicable military slash sheet or consult factory.
Specification MIL-STD-202, method 101, test condition B.
Shock
Thermal Shock
Corrosion (Salt Spray)
Moisture Resistance
Specification MIL-STD-202, method 106. No measurements at high humidity. Insulation
resistance shall be at least 200 megohms within 5 minutes of removal from humidity.
101
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMA Connectors (Continued)
Electrical
Corona
Contact Resistance
Insulation
Dielectric
RF High
Potential
at 5 MHz
(V RMS)
Frequency
Max.
(GHz)
Extinction
RF
RF
Leakage
(dB min.)
(milliohms max.)
VSWR
x (fGHz)
Resistance Withstanding
Connector Type
Cable
Voltage at Transmission
(megohms
min.)
Voltage
(Volts RMS)
Center
Outer
70,000 Ft.
Loss
Contact Contact
(V RMS min.)
Straight Cable Plug
without Contact
RG 402 (3.58 [.141])
Note 1 1.02 + .005 N/A
2.0
10,000
N/A
250
N/A
670
670
-(90-fGHz)
-(90-fGHz)
-
RG 405 (2.16 [.085])
RG 402 (3.58 [.141])
3.58 [.141] Microporous 18.0
RG 401 (6.35 [.250])
RG 174, 188, 316
RG 55, 58, 141, 142,
223, 303, 400
18.0
18.0
1.05 + .005
1.05 + .005
1.05 + .005
1.07 + .007
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
10,000
10,000
10,000
10,000
10,000
1000
1500
1500
1500
750
250
375
375
375
190
.03 f(GHz)
√
-
.03 f(GHz)
1000 -(90-fGHz)
1000 -(90-fGHz)
1000 -(90-fGHz)
500
670
670
√
-
.03 f(GHz)
√
Straight Cable Plugs
& Jacks Solder
Attachment
-
18.0
.03 f(GHz)
√
-
Note 1 1.15 + .01
.06 f(GHz)
-(60-fGHz)
-(60-fGHz)
-(90-fGHz)
√
-
Note 1 1.10 + .005
2.0
2.0
10,000
1000
250
.06 f(GHz)
√
-
Straight Cable Plugs
& Jacks Solder
Clamp Attachment
RG 405 (2.16 [.085])
RG 402 (3.58 [.141])
12.4
12.4
1.10 + .015
1.07 + .01
2.0
2.0
2.0
2.0
10,000
10,000
1000
1500
250
375
.03 f(GHz)
√
-
.03 f(GHz)
1000 -(90-fGHz)
√
RG 55, 58, 141, 142
223, 400
RG 174, 188, 316
RG 180, 195
RG 55, 142, 223, 400
RG 58, 141, 303
RG 174, 188, 316
RG 180, 195
RG 178, 196
RG 401 (6.35 [.250])
6.35 [.250] Microporous 18.0
6.35 [.250] 3 Spline
6.35 [.250] 5 Spline
RG 405 (2.16 [.085])
RG 405 (2.16 [.085])
RG 402 (3.58 [.141])
RG 402 (3.58 [.141])
-
Note 1 1.10 + .005
Note 1 1.15 + .01
2.0
2.0
10,000
1000
250
.06 f(GHz)
670
-(60-fGHz)
√
Straight Cable Plugs
& Jacks Clamp
Attachment
-
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
750
750
1000
1000
750
190
190
250
250
190
190
125
375
375
375
375
250
250
325
250
.06 f(GHz)
500
500
670
670
500
500
335
-(60-fGHz)
-(60-fGHz)
-(60-fGHz)
-(60-fGHz)
-(60-fGHz)
-(60-fGHz)
-(60-fGHz)
√
Note 1
—
—
-
Note 1 1.10 + .005
Note 1 1.10 + .005
Note 1 1.15 + .01
.06 f(GHz)
√
-
.06 f(GHz)
√
Straight Cable Plugs
& Jacks Crimp
Attachment
-
.06 f(GHz)
√
Note 1
Note 1
18.0
—
1.2 + .02
750
500
—
-
.06 f(GHz)
√
-
1.07 + .01
1.07 + .01
1.07 + .01
1.07 + .01
1.18 + .015
1.18 + .015
1.15 + .015
1.10 + .010
1500
1500
1500
1500
1000
1000
1500
1500
.05 f(GHz)
1000 -70 dB min.
1000 -70 dB min.
1000 -70 dB min.
1000 -70 dB min.
670
670
√
-
Straight Cable Plugs
& Jacks Compression
Clamp Attachment
.05 f(GHz)
√
-
18.0
18.0
12.4
18.0
12.4
18.0
.05 f(GHz)
√
-
.05 f(GHz)
√
-
.04 f(GHz)
-(90-fGHz)
-(90-fGHz)
√
-
.04 f(GHz)
√
-
.04 f(GHz)
1000 -(90-fGHz)
1000 -(90-fGHz)
√
Right-Angle Cable
Plugs Solder
Attachment
-
.05 f(GHz)
√
RG 55, 58, 141, 142,
223, 303, 400
-
Note 1 1.15 + .01
2.0
2.0
10,000
1000
250
.07 f(GHz)
670
-(60-fGHz)
√
-
RG 174, 188, 316
RG 55, 142, 223, 400
RG 58, 141, 303
RG 174, 188, 316
RG 180, 195
RG 178, 196
RG 55, 58, 141, 142,
223, 303
RG 174, 188, 316
RG 180, 195
Non-Captured
Epoxy Captured
Mechanical Capture
Note 1 1.15 + .02
Note 1 1.15 + .02
Note 1 1.15 + .02
Note 1 1.18 + .02
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
10,000
10,000
10,000
10,000
10,000
10,000
750
1000
1000
750
750
500
190
250
250
190
190
125
.07 f(GHz)
500
670
670
500
500
335
-(60-fGHz)
-(60-fGHz)
-(60-fGHz)
-(60-fGHz)
-(60-fGHz)
-(60-fGHz)
√
-
.07 f(GHz)
√
-
.07 f(GHz)
√
Right-Angle Cable
Plugs Crimp
Attachment
-
.07 f(GHz)
√
Note 1
—
—
-
Note 1 1.25 + .025
Note 1 1.10 + .005
Note 1 1.15 + .01
.07 f(GHz)
√
-
2.0
2.0
10,000
1000
250
.08 f(GHz)
670
-(60-fGHz)
√
Right-Angle Cable
Plugs Clamp
Attachment
-
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
10,000
10,000
10,000
10,000
10,000
750
750
1000
1000
1000
190
190
250
250
250
.08 f(GHz)
500
500
-(60-fGHz)
-(60-fGHz)
√
Note 1
18.0
18.0
—
—
-
1.03 + .004
1.05 + .005
1.04 + .004
.03 f(GHz)
670 -(100-fGHz)
670 -(60-fGHz)
670 -(100-fGHz)
√
-
.03 f(GHz)
√
Flange Mount Plugs
& Jacks Panel or
Bulkhead Mount
-
18.0
.03 f(GHz)
√
Field Replaceable
Hermetic Launchers
Epoxy Captured
Mechanical Capture
-
18.0
1.04 + .006
2.0
2.0
10,000
1000
250
.04 f(GHz)
670 -(100-fGHz)
√
-
18.0
18.0
18.0
12.4
1.07 + .010
1.07 + .010
1.07 + .015
1.15 + .015
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
10,000
10,000
10,000
10,000
1000
1000
1000
1000
250
250
250
250
.04 f(GHz)
670
-(60-fGHz)
√
Bulkhead
Feedthrough Jacks
-
.04 f(GHz)
670 -(100-fGHz)
670
670
√
-
N/A
N/A
.08 f(GHz)
-(90-fGHz)
-(90-fGHz)
√
Right-Angle Flange
Mount Jacks
-
.08 f(GHz)
√
Printed Circuit Board
N/A
N/A
N/A
N/A
18.0
12.4
18.0
18.0
N/A
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
10,000
10,000
10,000
10,000
1000
1000
1000
1000
250
250
250
250
N/A
670
670
670
670
N/A
Mount Straight Terminal
Right-Angle
Printed Circuit
End Launch
Stripline Circuit
Surface Launch
Stripline Circuit
N/A
N/A
N/A
-
1.05 + .005
1.05 + .005
.03 f(GHz)
-(60-fGHz)
-(60-fGHz)
√
-
.03 f(GHz)
√
-
N/A
N/A
12.4
18.0
1.15 + .015
1.07 + .015
2.0
2.0
2.0
2.0
10,000
10,000
1000
1000
250
250
.08 f(GHz)
670
670
-(60-fGHz)
-(60-fGHz)
√
Right-Angle Surface
Launch Stripline Circuit
-
.08 f(GHz)
√
1. Maximum operating frequency of cable per MIL-C-17.
2. Specifications do not apply to hermetic or compression crimp connectors.
3. For Brass SMA: Frequency Range DC-6GHz, Impedance 50 Ohms, Insulation Resistance.
102
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMA Connectors (Continued)
F
Interface Mating
Dimensions
D
G
Dia.
Note 2
0-36
S-2A Thd.
J
Dia.
G
Dia.
Dia.
Plug A
Plug
Jack
Dimension
Minimum
Maximum
Dimension
Minimum
Maximum
6.35
5.28
5.49
A
B
C
D
E
F
—
A
.250
.208
.216
4.59
.1808
4.60
.181
—
—
B
C
D
E
F
—
3.43
.135
1.91
.075
1.98
.078
0.00
.000
0.25
.010
0.00
.000
0.25
.010
2.54
.100
0.38
.015
1.43
.045
—
0.00
.000
0.25
.010
2.92
.115
—
0.90
0.94
0.00
0.25
G
H
G
H
J
.0355
.037
.000
.010
0.00
.000
0.38
.015
4.32
.170
—
.124
.049
1.30
.051
5.54
.218
K
—
Notes:
1. ID to meet VSWR and contact resistance when mated with 0.51 +.025/-.013 [.036 +.0010/-.0005] Dia. Pin.
2. When fully engaged, the two reference planes must coincide with metal to metal contact.
3. Metric equivalents (to the nearest 0.01mm) are given for general information only.
103
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMA Connectors (Continued)
Flexible Cable
30.2
[1.187]
Straight Cable Plug, Solder
Ref.
A
7.9
[.312]
Hex.
Heat Shrink
Tubing
16.7
[.658]
Ref. Plane
Ref.
Cable Type
RG/U
Body Material
& Finish
Contact
Captivation
Contact
Attachment
Dimension
Instruction
Sheet
Part
No.
A
55, 58, 141, 142,
223, 303, 400
19.7
Stainless, Gold1
Stainless, Gold1
No
No
Solder
408-4821
408-4756
1051638-1
1051644-1
.775
17.5
.690
174, 188, 316
Solder
1Coupling nut is passivated stainless steel.
25.6
Ref.
Straight Cable Jack, Solder
[1.007]
A
16.6
[.654]
Ref. Plane
Ref.
.250-36 UNS-2A
Heat Shrink
Tubing
6.4
[.250]
Hex.
Cable Type
RG/U
Body Material
& Finish
Contact
Captivation
Contact
Attachment
Dimension
Instruction
Sheet
Part
No.
A
55, 58, 141, 142,
223, 303, 400
18.5
.730
Stainless, Gold
No
Solder
408-4820
1051852-1
Bulkhead Cable Jack, Solder
31.10
[1.225]
Ref.
A
11.4
[.450]
9.50
[.374]
Ref.
Ref. Plane
Ø 6.4
[.250]
3.2 Max.
[.125] Panel
Min.
6.0
[.235]
Min.
.250-36 UNS-2A
Shrink Tubing
7.9
[.312]
Hex.
Recommended
Mounting Hole
Cable Type
RG/U
Body Material
& Finish
Contact
Captivation
Contact
Attachment
Dimension
Instruction
Sheet
Part
No.
A
RG 55, 58,
24.0
Stainless, Gold
Stainless, Gold
No
No
Solder
Solder
408-4817
408-4817
1051861-1
1051942-1
141, 142, 300
.945
Note: Part Numbers are RoHS
compliant except:ꢀ Indicates
non-RoHS compliant.
21.0
.825
174, 188, 316
104
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
www.tycoelectronics.com
C. America: 52-55-1106-0803
UK: 44-8706-080-208
RF Coax Connectors
SMA Connectors (Continued)
Flexible Cable (Continued)
16.9
[.666]
Right-Angle Cable Plug,
Solder
Ref.
13.5
[.530]
Ref.
10.5
[.413]
Ref.
Ref. Plane
7.9
[.312]
A
Hex.
25.9
[1.020]
Ref.
Heat Shrink
Tubing
Cable Type
RG/U
Body Material
& Finish
Contact
Captivation
Contact
Attachment
Dimension
A
Instruction
Sheet
Part
No.
55, 58, 141, 142,
223, 303, 400
16.0
Stainless, Gold1
Stainless, Gold1
Yes
Solder
Solder
408-4816
408-4815
1052063-1
1052067-1
.630
11.2
.440
174, 188, 316
Yes
1Coupling nut is passivated stainless steel.
19.0
[.750]
Straight Cable Plug, Clamp
Ref.
A
7.9
[.312]
Hex
Cable Type
RG/U
Body Material
& Finish
Contact
Captivation
Contact
Attachment
Dimension
A
Instruction
Sheet
Part
No.
2.9
.116
174, 188, 316
Stainless, Pass.
Yes
Solder
408-4906
1050721-1
17.8
[.700]
Straight Cable Jack, Clamp
Ref.
A
7.9
[.312]
Hex
Cable Type
RG/U
Body Material
& Finish
Contact
Captivation
Contact
Attachment
Dimension
A
Instruction
Sheet
Part
No.
2.9
.116
174, 188, 316
Stainless, Pass.
Yes
Solder
408-4906
1050903-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
105
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMA Connectors (Continued)
Flexible Cable (Continued)
22.6
[.890]
Bulkhead Feedthrough
Cable Jack, Clamp
Max.
11.4
[.450]
Ref.
Plane
9.5
[.374]
Ref.
Ø 6.4
[.250]
3.2 Max.
[.125] Panel
Min.
6.0
[.235]
Min.
7.9
[.312]
.250-36, UNS-2A
Hex.
Recommended
Mounting Hole
Cable Type
RG/U
Body Material
& Finish
Contact
Captivation
Contact
Attachment
Instruction
Sheet
Part
No.
174, 188, 316
Stainless, Pass.
Yes
Solder
408-4704
1050996-1
16.9
[.665]
Ref.
Right-Angle Cable Plug,
Clamp
12.9
[.509]
Ref.
10.0
[.392]
Ref. Plane
Ref.
18.0
[.710]
Max.
14.3
[.562]
Max.
7.9
[.312]
Hex.
Cable Type
RG/U
Body Material
& Finish
Contact
Captivation
Contact
Attachment
Instruction
Sheet
Part
No.
174, 188, 316
Stainless, Pass.
Mechanical
Solder
408-4965
1051140-1
25.4
[1.00]
Ref.
Straight Cable Plug, Crimp
22.4
Ref. Plane
Ref.
[.883]
7.9
[.312]
Hex.
Crimp
Tooling
Part No.
Cable Type
RG/U
Body Material
& Finish
Contact
Captivation
Contact
Attachment
Instruction
Sheet
Part
No.
174, 179, 187,
188, 316
Stainless, Pass.
Stainless, Pass.
Mechanical
Solder/Crimp2
1055236-1 408-4661
1056443-1
RD316
Mechanical
Mechanical
Solder/Crimp2
Solder/Crimp2
1055236-11 408-4661
1055236-1 408-4661
1056436-1
1056438-1
55, 142, 223, 400 Stainless, Pass.
174, 179, 187,
188, 316
Brass,
White Bronze
Mechanical
Solder/Crimp2
1055236-1 408-4661
1082034-1
1Use die 1055270-1 to crimp RD316 ferrule.
2Use die 1055880-1 to crimp center contact.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
106
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMA Connectors (Continued)
Flexible Cable (Continued)
Straight Cable Jack, Crimp
33.1
[1.304]
Ref.
21.3
[.837]
Ref.
19.3
[.761]
Ref. Plane
Ref.
6.35
Hex.
[.250]
27.43
Max.
[1.080]
Heat Shrink
Tubing
.250-36 UNS-2A
6.4
[.250]
Hex.
7.9
[.312]
Hex.
Style A
Style B
Crimp
Tooling
Part No.
Cable Type
RG/U
Body Material
& Finish
Contact
Captivation
Contact
Attachment
Instruction
Sheet
Part
No.
Style
1
174, 316
Brass, Nickel
Mechanical
Mechanical
Mechanical
Mechanical
Solder
Solder
Solder
Solder
408-4032
408-4704
408-4708
408-4806
A
B
B
B
5447648-3
1051867-1
1051855-1
1051869-1
58, 141, 303
Stainless, Pass.
1055236-1
1055236-1
1055236-1
174, 188, 316 Stainless, Pass.
178, 196 Stainless, Pass.
1Refer to Tyco Electronics Customer Print for tooling requirement. DANIELS Mil Tooling used for contact and ferrule
crimp.
26.4
Ref.
Bulkhead Feedthrough
Cable Jack, Crimp
[1.040]
11.4
[.450]
3.2 Max.
[.125] Panel
6.4 Dia.
[.250] Min.
Lock Washer
6.0
[.235]
.250-36 UNS-2A
Min.
7.9
[.312]
Hex
Recommended
Mounting Hole
Crimp
Tooling
Part No.
Cable Type
RG/U
Body Material
& Finish
Contact
Captivation
Contact
Attachment
Instruction
Sheet
Part
No.
174, 179, 187,
188, 316
Stainless, Pass.
Mechanical
Solder/Crimp2
1055236-1 408-4661
1056452-1
RD316
Stainless, Pass.
Stainless, Pass.
Mechanical
Mechanical
Solder/Crimp2
Solder/Crimp2
1055236-13 408-4661
1055236-1 408-4661
1056445-1
1056450-1
58, 141, 303
55, 142,
223, 400
Stainless, Pass.
Brass, Nickel
Mechanical
Mechanical
Solder/Crimp2
Crimp
1055236-1 408-4661
1056447-1
5448103-2
1
174, 188, 316
408-4032
1Refer to Tyco Electronics Customer Print for tooling requirement. DANIELS Mil Tooling used for contact and ferrule
crimp.
2Use die 1055880-1 to crimp center contact.
3Use die 1055270-1 to crimp RD316 ferrule.
DANIELS is a trademark of Daniels
Manufacturing Corporation.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
107
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMA Connectors (Continued)
Flexible Cable (Continued)
16.9
[.665]
Ref.
Right-Angle Cable Plug,
Crimp
13.5
[.530]
Ref.
10.5
[.413]
Ref.
Ref. Plane
20.4
[.802]
Ref.
7.9
[.312]
Hex.
17.2
[.677]
Ref.
Crimp
Tooling
Part No.
Cable Type
RG/U
Body Material
& Finish
Contact
Captivation
Contact
Attachment
Instruction
Sheet
Part
No.
174, 179, 187,
188, 316
Stainless, Pass.
Stainless, Pass.
Mechanical
Mechanical
Solder
Solder
1055236-1
1055236-1
408-4659
408-4659
1056462-1
1056456-1
58, 141, 303
16.9
[.665]
Right-Angle Cable Plug,
Crimp
Ref.
13.4
[.530]
Ref.
12.1
[.475]
Ref.
7.9
[.312]
Hex
27.0
[1.062]
Ref.
Crimp
Tooling
Part No.
Cable Type
RG/U
Body Material
& Finish
Contact
Contact
Instruction
Sheet
Part
No.
Captivation Attachment
55, 142,
223, 400
Stainless, Pass.
Epoxy
Solder
1055236-1
408-4681
1052072-1
174, 188, 316
178, 196
Stainless, Pass.
Stainless, Pass.
Epoxy
Epoxy
Solder
Solder
1055236-1
1055236-1
408-4683
408-4801
1052076-1
1052098-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
108
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMA Connectors (Continued)
Flexible Cable (Continued)
Straight Push-On
6.35
Min.
[.250]
31.50
Ref.
Plug Sleeve
Clearance Area
[1.240]
27.61
[1.087]
Ref.
± 0.13
5.08
[.200
Ref. Plane
± .005
]
Thread Length
5.49
[.216]
Ø 12.70
[.500]
Max.
Cable Type
RG/U
Body Material
& Finish
Contact
Captivation
Contact
Attachment
Part
No.
316
Beryllium Copper, Gold
Mechanical
Crimp
1408541-1
Right-Angle Push-On
6.35
Min.
[.250]
27.97
Ref.
Plug Sleeve
Clearance Area
[1.101]
20.65
[.813]
± 0.13
5.08
[.200
Ref. Plane
Ref.
± .005
]
Thread Length
5.49
[.216]
Ø 12.70
[.500]
Max.
17.32
[.682]
Ref.
14.15
Ref.
[.557]
Cable Type
RG/U
Body Material
& Finish
Contact
Captivation
Contact
Attachment
Part
No.
316
Beryllium Copper, Gold
Mechanical
Solder/Crimp
1274694-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
109
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMA Connectors (Continued)
Direct Solder Attachment, Semi-Rigid Cable
Straight Cable Plug
5.4
[.213]
Ø 3.66
[.144]
Ref.
8.40
[.330]
Solder
Assembly Kit
Part No.
Cable Type
RG/U
Body Material
& Finish
Contact
Captivation
Contact
Attachment
Instruction
Sheet
Part
No.
No Center
Contact
No Center
Contact
402 (3.58 [.141])
Stainless, Pass.
1055420-1
408-4761 1050757-1
Straight Cable Plug
Ø 3.67 [.144] RG402/U
Ø 2.26 [.089] RG405/U
8.1
[.320]
Ref.
11.2
[.440]
Ref.
Ø 4.6
[.180]
Solder
Assembly Kit
Part No.
Cable Type
RG/U
Body Material
& Finish
Contact
Captivation
Contact
Attachment
Instruction
Sheet
Part
No.
402 (3.58 [.141])
405 (2.16 [.085])
Stainless, Gold1
Stainless, Gold1
No
No
Solder
Solder
1055420-1
1055420-1
408-4764 1050525-1
408-4765 1050770-1
No Center
Contact
No Center
Contact
402 (3.58 [.141])
405 (2.16 [.085])
Stainless, Gold1
Stainless, Gold1
N/A
—
—
1050542-1
1050548-1
No
Solder
1055420-1
1Coupling nut is passivated stainless steel.
Straight Cable Jack
12.7
[.500]
Ø 3.66 [.144] RG402/U
Ø 2.26 [.089] RG405/U
10.8
Ref.
[.424]
Solder
Assembly Kit
Part No.
Cable Type
RG/U
Body Material
& Finish
Contact
Captivation
Contact
Attachment
Instruction
Sheet
Part
No.
402 (3.58 [.141])
405 (2.16 [.085])
Stainless, Gold
Stainless, Gold
No
No
Solder
Solder
1055420-1
1055420-1
408-4767 1050854-1
408-4833 1050859-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
110
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMA Connectors (Continued)
Direct Solder Attachment, Semi-Rigid Cable (Continued)
19.0
[.748]
Bulkhead Cable Jack
12.7
[.500]
10.5
[.415]
Ø 3.66 [.144] RG402/U
Ø 2.26 [.089] RG405/U
8.6
[.339]
6.0
[.235]
Ref.
Min.
Ø 6.4
[.250]
Min.
Ø 4.6
[.180]
Recommended
Mounting Hole
2.4 Max
[.093] Panel
Solder
Assembly Kit
Part No.
Cable Type
RG/U
Body Material
& Finish
Contact
Captivation
Contact
Attachment
Instruction
Sheet
Part
No.
402 (3.58 [.141])
Brass, Gold
No
Solder
1055420-1
408-4768 1082029-1
14.2
[.560]
2 Hole Flange Mount
Cable Jack
9.5
[.375]
7.6
[.299]
5.7
[.223]
Ref.
1.7
[.065]
Ø 3.66 [.144] RG402/U
Ø 2.26 [.089] RG405/U
12.2
[.481]
Ø 15.9
[.625]
.250-36 UNS-2A
Ø 2.6
[.102]
2 Plcs.
Solder
Assembly Kit
Part No.
Cable Type
RG/U
Body Material
& Finish
Contact
Captivation
Contact
Attachment
Instruction
Sheet
Part
No.
402 (3.58 [.141])
405 (2.16 [.085])
Stainless, Gold
Stainless, Gold
No
No
Solder
Solder
1055420-1
1055420-1
408-4767 1051052-1
408-4883 1051046-1
4 Hole Flange Mount
Cable Jack
Ø 3.66 [.144] RG402/U
Ø 2.26 [.089] RG405/U
Ø 2.6
[.102]
7.6
Ref.
4 Plcs.
[.299]
8.6
[.340]
2 Plcs.
9.5
[.375]
12.7
[.500]
Sq.
14.2
[.560]
Solder
Assembly Kit
Part No.
Cable Type
RG/U
Body Material
& Finish
Contact
Captivation
Contact
Attachment
Instruction
Sheet
Part
No.
402 (3.58 [.141])
405 (2.16 [.085])
Stainless, Gold
Stainless, Gold
No
No
Solder
Solder
1055420-1
1055420-1
408-4767 1051081-1
408-4883 1051085-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
111
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMA Connectors (Continued)
Semi-Rigid Cable
17.1
[.675]
Right-Angle Cable Plug,
Direct Solder Attachment
Ref.
13.6
[.535]
Ref.
10.5
[.413]
Ref.
Ref. Plane
7.9
[.312]
Ref.
7.9
[.312]
Hex.
Ø 3.66 [.144] RG402/U
Ø 2.26 [.089] RG405/U
Solder
Assembly Kit
Part No.
Cable Type
RG/U
Body Material
& Finish
Contact
Captivation
Contact
Attachment
Instruction
Sheet
Part
No.
402 (3.58 [.141])
405 (2.16 [.085])
405 (2.16 [.085])
Stainless, Gold1
Stainless, Gold1
Brass, Gold
Epoxy
Epoxy
Solder
Solder
Solder
1055420-1
1055420-1
1055420-1
408-4831 1051151-1
408-4831 1051157-1
408-4831 1088312-1
Mechanical
1Coupling nut is passivated stainless steel.
Straight Cable Plug, Crimp
9.8
Ref.
[.387]
6.9 [.270] RG402/U
7.1 [.278] RG405/U
Ref
Ø 3.63 [.143] RG402/U
Ø 2.26 [.089] RG405/U
Crimp
Cable Type
RG/U
Body Material
& Finish
Contact
Contact
Instruction
Sheet
Part
No.
Tooling
Captivation
Attachment
Solderless
Solderless
Part No.
1055835-1
405 (2.16 [.085])
402 (3.58 [.141])
Stainless, Pass.
Stainless, Pass.
Mechanical
408-4695 1050598-1
408-4690 1050740-1
No Center
Contact
1055835-1
Ø 3.66 [.144] RG402/U
Ø 2.26 [.089] RG405/U
Straight Cable Plug —
Low Profile, Crimp
5.8
[.229]
Ref.
Ref.
8.6
[.337]
Crimp
Cable Type
RG/U
Body Material
& Finish
Contact
Captivation
Contact
Attachment
Instruction
Sheet
Part
No.
Tooling
Part No.
402 (3.58 [.141])
405 (2.16 [.085])
Stainless, Pass.
Stainless, Pass.
Mechanical
Mechanical
Solderless
Solderless
1055835-1
1055835-1
408-4696 1050602-1
408-4697 1050611-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
112
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMA Connectors (Continued)
Semi-Rigid Cable (Continued)
16.70
[.657]
2 Hole Flange, Crimp
Max.
After Crimping
14.50
[.569]
Ref.
After Crimping
6.00
[.235]
OSM Jack
6.30 Dia.
[.250] Min.
7.90
[.312]
Recommended
Mounting Hole
Hex.
11.10
[.437]
Hex.
8.60
[.339]
Ref. Plane
Ref.
Crimp
Cable Type
RG/U
Body Material
& Finish
Contact
Captivation
Contact
Attachment
Instruction
Sheet
Part
No.
Tooling
Part No.
402 (3.58 [.141])
405 (2.16 [.085])
Stainless, Pass.
Stainless, Pass.
Mechanical
Mechanical
Solderless
Solderless
1055835-1
1055835-1
408-4954 1051005-1
408-4689 1051007-1
Right-Angle Cable Plug,
Crimp
15.8
[.622]
Ref.
12.6
[.497]
Ref.
9.7
[.383]
Ref.
Ref. Plane
14.43
[.568]
After Crimping
7.9
[.312]
Hex.
Ø 3.63 [.143] RG402/U
Ø 2.26 [.089] RG405/U
11.25
[.443]
Ref. After Crimping
Crimp
Tooling
Part No.
Cable Type
RG/U
Body Material
& Finish
Contact
Captivation
Contact
Attachment
Instruction
Sheet
Part
No.
402 (3.58 [.141])
405 (2.16 [.085])
Stainless, Pass.
Stainless, Pass.
Mechanical
Mechanical
Solderless
Solderless
1055835-1
1055835-1
408-4691 1051145-1
408-4692 1051147-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
113
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMA Connectors (Continued)
Panel Mount, Solder Pot Terminal
4 Hole Flange Mount Plug
Receptacle
12.7
[.500]
18.0
[.707]
Sq.
Ref.
12.9
Ref.
[.507]
1.7
8.6
Typ.
[.340]
6.4 Dia.
[.065]
[.250] Min.
1.3
[.050]
Dia.
7.9
[.312]
2.6 Dia.
[.102] 4 Plcs.
Hex
Body Material
& Finish
Contact
Captivation
RF Leakage
db min.
Temperature
Range
Part
No.
Stainless, Passivated
Epoxy
N/A
-65 to 125° C
1052324-1
14.6
[.575]
4 Hole Flange Mount Jack
Receptacle
12.7
[.500]
Sq.
9.5
[.375]
8.6
Typ.
[.340]
1.7
[.065]
Ø 0.9
[.035]
Ø 1.3
.250-36UNS-2A
Ref. Plane
[.050]
Ø 2.6
[.102]
7.6
[.299]
4 Plcs.
Body Material
& Finish
Contact
Captivation
RF Leakage
db min.
Temperature
Range
Part
No.
Stainless, Passivated
Epoxy
-(60-fGHz)
-65 to 125° C
1052422-1
14.6
[.575]
2 Hole Flange Mount Jack
Receptacle
9.5
[.375]
1.7
[.065
5.7
Typ.
15.9
[.625]
12.2
481]
2.6 Dia.
[.102] 2 Plcs.
Body Material
& Finish
Contact
Captivation
RF Leakage
db min.
Temperature
Range
Part
No.
Stainless, Passivated
Epoxy
-(60-fGHz)
-65 to 125° C
1052544-1
14.6
[.575]
2 Hole Flange Mount Jack
Receptacle
0.8
[.030]
9.5
[.375]
5.7
[.223]
7.6
[.299]
Ref.
Ref. Plane
1.7
[.065]
Ø 0.8
[.031]
12.2
[.481]
Ø 15.9
[.625]
Ø 1.3
[.050]
.250-36 UNS-2A
Ø 4.1
[.162]
Ø 2.6
2 Plcs.
[.102]
Body Material
& Finish
Stainless, Passivated
Contact
RF Leakage
Temperature
Range
-65 to 125° C
Part
No.
1052534-1
Note: Part Numbers are RoHS
compliant except:ꢀ Indicates
non-RoHS compliant.
Captivation
db min.
Epoxy
-(60-fGHz)
114
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMA Connectors (Continued)
Panel Mount
17.0
[.668]
Bulkhead Feedthrough Jack
Receptacle, Solder Pot Terminal
6.0
[.235]
Min.
12.7
[.500]
1.6
[.062]
6.4
[.250]
Min.
1.3
[.050]
Dia.
4.1
[.162]
Dia.
Recommended
Mounting Hole
7.9
[.312]
Hex.
Body Material
& Finish
Contact
Captivation
RF Leakage
db min.
Temperature
Range
Part
No.
Stainless, Passivated
Epoxy
N/A
-65 to 125° C
1053092-1
+ 0.03
Press-In Jacks,
Straight Terminal
Ø 0.50
– 0.07
+ .001
– .003
[.020
]
Ø 5.50
Ref.
[.217]
± 0.60
Ø 8.50
[.335
± .024
]
± 0.20
± 0.10
6.10
[.240
2.50
[.098
± .008
± .004
]
]
± 0.10
± 0.20
± .008
]
10.10
[.398
8.90
[.350
± .004
]
Part Number 1460468
+ 0.40
3.50
– 0.20
+ .016
– .008
+ 0.00
– 0.10
+ .000
– .004
± 0.10
± .004
1.10
[.043
Ø 1.00
[.138
]
]
[.039
]
± 0.10
+ 0.02
2.00
[.079
5.05
+ 0.10
± 0.10
– 0.03
4.50
± .004
Ø 8.00
]
– 0.20
+ .004
– .008
+ .0008
– .0012
± .004
[.177
]
[.199
]
[.315
]
± 0.10
± .004
5.00
[.197
]
± 0.20
14.10
[.555
± .008
]
Part Number 1460469
Body Material
& Finish
Brass, White Bronze
Brass, Gold
Contact
RF Leakage
db min.
Temperature
Range
–65 to 125° C
–65 to 125° C
Part
No.
1460468-1
1460469-1
Captivation
Mechanical
Mechanical
N/A
N/A
Press-In Cable,
Jack Panel
22.40
[.882]
± 0.10
± 0.10
11.00
[.433
1.50
[.059
± .004
± .004
]
]
± 0.10
9.60
[.378
± 0.10
4.00
[.157
+ 0.03
Ø 7.00
– 0.01
± .004
]
± .004
]
+ .0010
– .0004
[.276
]
1/4" - 36 UNS-2A
Recommended
Mounting Hole
± 0.10
Ø 13.00
[.512
± .004
]
+ 0.05
Ø 7.40
– 0.03
+ .002
– .001
[.291
]
Cable Type
RG/U
Body Material
& Finish
Contact
Captivation
Temperature
Range
Part No.
Note: Part Numbers are RoHS
compliant except:ꢀ Indicates
non-RoHS compliant.
316 D
Brass, Gold
Mechanical
–65 to 125° C
619115-1
115
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMA Connectors (Continued)
Panel Mount, Straight Terminal
± 0.25
27.43
4 Hole Flange Mount Jack
Receptacle
± 0
]
[1.080
9.5
[.375]
12.7
[.500]
Sq.
± 0.25
± 0
14.99
[.590
.250-36 UNS-2A
]
8.6
[.340]
1.7
Typ.
[.065]
Ø 1.3
[.050]
Ø 4.1
[.162]
Ø 2.6
[.102]
4 Plcs.
7.6
[.299]
Ref. Plane
Ref.
Body Material
& Finish
Stainless, Passivated
Stainless, Passivated
Stainless, Gold
Contact
RF Leakage
db min.
-(100-fGHz)
-(60-fGHz)
-(60-fGHz)
Temperature
Range
-65 to 165° C
-65 to 125° C
-65 to 125° C
Part
Captivation
None
No.
1052518-1
1052523-1
1052522-1
Epoxy
Epoxy
25.3
[.995]
2 Hole Flange Mount Plug
Receptacle
Ref.
12.9
[.507]
8.4
Ref.
[.330]
6.6
1.7
[.065]
[.260]
12.2
[.481]
15.9
[.625]
1.3
[.050]
Dia.
4.1
[.162]
7.9
[.312]
Hex
2.6 Dia.
[.102] 2 Plcs.
Body Material
& Finish
Contact
Captivation
RF Leakage
db min.
Temperature
Range
Part
No.
Stainless, Passivated
Epoxy
-(60-fGHz)
-65 to 125° C
1052349-1
± 0.25
27.43
2 Hole Flange Mount Jack
Receptacle
± 0
]
[1.080
9.5
[.375]
± 0.25
14.99
5.7
± 0
[.590
]
1.7
[.223]
[.065]
Ø 1.3
[.050]
12.2
[.481]
Ø 15.9
[.625]
Ø 4.1
[.162]
.250-36 UNS-2A
Ref. Plane
7.6
[.299]
Ref.
Ø 2.6
[.102]
2 Plcs.
Body Material
& Finish
Contact
Captivation
RF Leakage
db min.
Temperature
Range
Part
No.
Stainless, Passivated
Epoxy
-(60-fGHz)
-65 to 125° C
1052552-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
116
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMA Connectors (Continued)
Panel Mount, Straight Terminal (Continued)
12.7
[.500]
Bulkhead Feedthrough Jack
Receptacle
4.1
[.160]
10.82
[.426]
Ref.
Ref. Plane
1.9
[.076]
Ø 1.3
[.050]
.250-36 UNS-2A
Ø 4.1
[.162]
7.9
[.312]
Hex.
Lockwasher
Body Material
& Finish
Contact
Captivation
RF Leakage
db min.
Temperature
Range
Part
No.
Stainless, Passivated
Epoxy
-(60-fGHz)
-65 to 125° C
1053222-1
± 0.13
11.1
[.437
2 Hole Flange Mount
Right-Angle Jack
Receptacle
± .001
]
Ø 15.9
[.625]
± 0.25
7.9
± .010
[.312
15.0
[.590
]
12.2
[.481]
± 0.25
± .010
1.7
[.065]
1.3
[.050]
]
11.6
[.458]
5.7
[.223]
4.1
[.162]
Ø 2.6
[.102]
2 Plcs.
Body Material
& Finish
Contact
Captivation
RF Leakage
db min.
Temperature
Range
Part
No.
Stainless, Passivated
Mechanical
-(90-fGHz)
-65 to 165° C
1052986-1
± 0.25
± 0.25
17.91
[.705
4 Hole Flange Mount
Right-Angle Jack
Receptacle
12.83
[.505
± .010
± .010
]
]
± 0.25
9.65
[.380
Ø 2.6
[.102]
± 0.25
14.99
[.590
4 Plcs.
± .010
]
± .010
]
1.7
[.065]
Ø 4.1
[.162]
12.7
[.500]
Sq.
9.7
[.382]
Ref.
11.6
[.458]
Ø 1.3
[.050]
8.6
[.340]
Typ.
.250-36 UNS-2A
Ref. Plane
Body Material
& Finish
Stainless, Passivated
Stainless, Passivated
Contact
RF Leakage
db min.
-(90-fGHz)
-(90-fGHz)
Temperature
Range
-65 to 165° C
-65 to 165° C
Part
No.
1052978-1
1052982-1
Captivation
Mechanical
Mechanical
Note: Part Numbers are RoHS compliant except:lIndicates non-RoHS compliant.
117
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMA Connectors (Continued)
Panel Mount
12.7
[.500]
Sq.
4 Hole Flange Mount Jack
Receptacle, Straight
Terminal
9.5
[.375]
1.3
[.050]
8.6
[.340]
1.7
[.065]
Typ.
Slot Width
Ø 1.3
[.050]
.250-36 UNS-2A
Ref. Plane
Ø 2.6
[.102]
4 Plcs.
7.6
[.299]
Ref.
Slot Width
Body Material
& Finish
Contact
Captivation
RF Leakage
db min.
Temperature
Range
Part
No.
+.076/-.025
[+.003/-.001]
Stainless, Passivated
Epoxy
0.5 [.018]
-(60-fGHz)
-65 to 125° C
1052563-1
8.6
[.340]
4 Hole Flange Mount Plug
Receptacle, Tab Terminal
Typ.
9.9
Ref.
[.390]
0.1
[.005]
Thk.
X
1.2
Wide
Tab
Ø 2.6
[.102]
[.050]
4 Plcs.
1.7
[.065]
12.7
[.500]
Sq.
12.9
2.5
[.100]
Ref.
[.507]
Body Material
& Finish
Contact
Captivation
Tab
Width
RF Leakage
db min.
Temperature
Range
Part
No.
Stainless, Passivated
Epoxy
1.3 [.050]
-(60-fGHz)
-65 to 125° C
1052360-1
9.5
[.375]
2.5
[.100]
12.7
[.500]
Sq.
4 Hole Flange Mount Jack
Receptacle, Tab Terminal
8.6
1.7
[.065]
2 Plcs.
[.340]
0.13
[.005]
Thk.
X
Ø 2.6
[.102]
7.6
[.299]
4 Plcs.
0.5
Wide
Tab
Ref.
[.020]
Body Material
& Finish
Contact
Captivation
Tab
Width
RF Leakage
db min.
Temperature
Range
Part
No.
Stainless, Passivated
Epoxy
.51 [.020]
-(60-fGHz)
-65 to 125° C
1052898-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
118
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMA Connectors (Continued)
9.5
[.375]
2.5
[.100]
2 Hole Flange Mount Jack
Receptacle, Panel Mount,
Tab Terminal
5.7
[.223]
1.7
[.065]
0.13
[.005]
X
1.27
Thk.
12.2
[.481]
Wide
Tab
[.050]
Ø 15.9
[.625]
.250-36UNS-2A
Ref. Plane
7.59
[.299]
Ø 2.6
[.102]
Ref.
2 Plcs.
Body Material
& Finish
Stainless, Passivated
Contact
Horizontal
Tab
ꢁ
RF Leakage
db min.
-(60-fGHz)
Temperature
Range
-65 to 125° C
Part
No.
1052577-1
Captivation
Epoxy
9.5
[.375]
4 Hole Flange Mount Jack
Receptacle, for Microstrip
Transmission Line Circuits
4.4
7.59
[.299]
Ref.
Ref. Plane
[.175]
12.7
[.500]
Sq.
3.2
8.6
[.340]
[.125]
Typ.
1.7
[.065]
0.3
[.010]
2.2
[.085]
Ø 2.6
[.102]
.250-36 UNS-2A
4 Plcs.
Body Material
& Finish
Contact
Captivation
RF Leakage
db min.
Temperature
Range
Part
No.
Stainless, Passivated
Epoxy
-(60-fGHz)
-65 to 125° C
1052528-1
9.5
[.375]
2 Hole Flange Mount Jack
Receptacle, for Microstrip
Transmission Line Circuits
3.2
[.125]
5.7
[.223]
1.7
[.065]
1.2
[.049]
Ø 0.3
[.010]
12.2
[.481]
Ø 15.9
[.625]
Ø 2.2
.250-36 UNS-2A
Ref. Plane
[.085]
7.6
Ref.
Ø 2.6
2 Plcs.
[.102]
[.299]
Body Material
& Finish
Contact
Captivation
RF Leakage
db min.
Temperature
Range
Part
No.
Stainless, Passivated
Epoxy
-(60-fGHz)
-65 to 125° C
1052902-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
119
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMA Connectors (Continued)
Field Replaceable Hermetic Launchers (Continued)
4 Hole Flange Mount Jack
Receptacle with EMI/RFI
Gasket
EMI Gasket
Accepts Pin Dia. A
.250-36UNS-2A
12.7
Ref.
[.500]
8.6
[.340]
2 Plcs.
Ref. Plane
0.1
[.005]
Ø 2.6
[.102]
Ref.
4 Plcs.
1.7
[.065]
7.6
Ref.
[.299]
9.5
[.375]
Material & Finish
Captivation
Pin Diameter A
Part No.
Stainless, Passivated
Mechanical
.38 [.015]
1052684-1
4 Hole Flange Mount Jack
Receptacle without EMI/RFI
Gasket
9.5
[.375]
12.7
[.500]
Sq.
1.7
[.065]
8.6
[.340]
2 Plcs.
Accepts
Pin Dia. A
7.6
[.299]
Ref.
Ø 2.6
[.102]
4 Plcs.
Material & Finish
Stainless, Passivated
Captivation
Mechanical
Pin Diameter A
.91 [.036]
Part No.
1052643-1
1.7
[.065]
5.6
[.222]
2 Hole Flange Mount Jack
Receptacle with EMI/RFI
Gasket
9.5
[.375]
0.1
[.005]
Min.
EMI
Gasket
12.2
[.481]
Ø 15.9
[.625]
Accepts
Pin Dia. A
.250-36 UNS-2A
Ref. Plane
7.6
[.299]
Ref.
Ø 2.6
2 Plcs.
[.102]
Material & Finish
Captivation
Mechanical
Mechanical
Mechanical
Pin Diameter A
.30 [.012]
Part No.
Stainless, Passivated
Stainless, Passivated
Stainless, Passivated
1052628-1
1052689-1
1052634-1
.38 [.015]
.46 [.018]
9.5
[.375]
5.7
[.223]
2 Hole Flange Mount Jack
Receptacle without EMI/RFI
Gasket, Field Replaceable
Hermetic Launchers
Ø 2.6
[.102]
2 Plcs.
1.7
[.065]
Ø 15.9
[.625]
12.2
[.481]
7.6
[.299]
Accepts Pin Dia A
Material & Finish
Stainless, Passivated
Stainless, Passivated
Captivation
Mechanical
Mechanical
Pin Diameter A
.51 [.020]
Part No.
1052652-1
1052646-1
.91 [.036]
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
120
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMA Connectors (Continued)
13.5
[.530]
5.1
[.200]
2 Plcs.
PC Board Mount
Vertical Jack
9.5
[.375]
3.9
[.155]
6.3
[.250]
Ref.
Sq.
7.6
[.299]
Ref.
Ref. Plane
5.1
Ø 1.3
[.050]
Typ.
[.200]
Ø 1.7
[.067]
5 Plcs.
Recommended
Mounting Holes
1.0 Sq.
[.040] 4 Plcs.
.250-36 UNS-2A
Style 1
19.94
12.70
[.785]
[.500]
5.28
[.203]
± 0.13
± .005
± 0.13
± .005
6.35
[.250
6.35
[.250
± 0.13
9.53
[.375
]
]
± .005
]
12.70
[.500]
Ø 0.63
[.025]
± 0.03
± .001
1.27
[.050
3 Plcs.
]
Style 2
Style 3
Material & Finish
Stainless, Gold
Brass, Gold
Style No.
Part No.
1
2
2
3
1053354-1
221789-1
221789-3
6274096-1
Brass, Gold
Brass, Nickel Plate
13.5
[.530]
PC Board Mount
Right-Angle Jack
± 0.25
6.35
± 0
[.250
]
3.9
[.155]
Ref.
0.5
[.020]
Typ.
6.4
[.250]
Sq.
9.7
[.382]
Ref.
11.6
[.458]
Ø 1.3
[.050]
5.1
[.200]
Typ.
2.8
[.110]
Typ.
1.0 Sq.
[.040] 4 Plcs.
5.1
[.200]
2 Plcs.
Ref. Plane
Style 1
15.24
Max.
[.600]
11.68
[.460]
Ø 1.7
[.067]
6.35
[.250]
5 Plcs.
± .05
1.93
[.076
Recommended
Mounting Holes
± .002
]
9.65
[.380]
Max.
4.60 Min.
[.181] Dia.
3.94
[.155]
± .05
± .03
1.27
[.050
1.02
[.040
Typ.
Dia.
± .001
]
± .002
]
Style 2
Material & Finish
Style No.
Part No.
Stainless, Gold
Stainless, Gold
1
2
1053378-1
221790-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
121
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMA Connectors (Continued)
In-Series Adapter,
Jack to Jack
8.8
[.348]
Ref.
Ref. Plane
Ref. Plane
5.5
Across Flats
[.218]
3.2
[.125]
12.7
[.500]
Frequency
Material & Finish
Captivation
Part No.
DC-18.0GHz
Stainless, Gold
Epoxy*
1053488-1
22.2
[.875]
Ref.
In-Series Adapter,
Plug to Plug
3.2
[.125]
5.5
[.218]
7.9
[.312]
Across Flats
Hex
Frequency
Material & Finish
Captivation
Part No.
DC-18.0GHz
Stainless, Passivated
Epoxy*
1053635-1
*All adapters listed above employ epoxy captivation. Mechanically captivated
versions are also available. Please consult Tyco Electronics.
15.9
Ref.
In-Series Adapter,
Jack to Plug, Right-Angle
[.625]
7.9
[.312]
Hex
12.7
[.500]
14.8
[.583]
11.6
[.458]
Frequency
Material & Finish
Captivation
Part No.
DC-12.4GHz
Stainless, Passivated
Mechanical
1055065-1
11.7
[.459]
In-Series Adapter,
Jack to Jack, Right-Angle
9.7
[.383]
Ref.
Ref. Plane
9.7
[.383]
Ref.
11.7
[.459]
.250-36 UNS-2A
Ref. Plane
Frequency
DC-12.4GHz
Material & Finish
Stainless, Passivated
Captivation
Mechanical
Part No.
1055018-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
122
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMA Connectors (Continued)
14.0
[.550]
Ref.
In-Series Adapter,
Plug to Plug, Right-Angle
11.1
[.438]
Ref.
Ref. Plane
11.1
[.438]
Ref.
14.0
[.550]
Ref.
7.9
[.312]
Hex.
Ref. Plane
Frequency
Material & Finish
Captivation
Part No.
DC-18.0GHz
Stainless, Passivated
Mechanical
1055047-1
18.3
Ref.
In-Series Adapter,
Jack to Plug, Connector Saver
[.720]
13.3
Ref. Plane
Ref. Plane
Ref.
[.524]
.250-36 UNS-2A
Across Flats
7.9
[.312]
Hex.
5.6
[.219]
Frequency
DC-18.0GHz
Material & Finish
Stainless, Passivated
Captivation
Epoxy
Part No.
1054426-1
22.2
[.875]
In-Series Adapter,
Jack to Jack,
Bulkhead Feedthrough
14.6
[.575]
1.7
[.065]
6.4
Max Panel
Lock
Washer
[.250]
6.0
[.235]
.250-36 UNS-2A
Min.
.250-36 UNS-2A
9.5
[.375]
Hex.
7.9
[.312]
Ø 6.4
[.250]
Hex.
Min.
Recommended
Mounting Hole
18.4
[.723]
Ref. Plane
Ref. Plane
Ref.
Frequency
DC-18.0GHz
Material & Finish
Stainless, Passivated
Captivation
Epoxy*
Part No.
1054869-1
*Mechanically captivated version available. Please consult Tyco Electronics.
5.50
Test Adapter,
Plug to Jack,
Quick Release
Across Flats
[.215]
23.00
[.905]
Reference Plane
Ref.
Reference Plane
OSM Jack
Ø 12.70 Ø 10.20
[.500]
[.400]
.250-36 UNS-2A
Retaining
Ring
24.90
[.982]
OSM Plug
Ref.
28.60
[1.125]
Ref.
Frequency
Material & Finish
Captivation
Part No.
DC-18.0GHz
Stainless, Passivated
Epoxy
1053780-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
123
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
QMA Connectors
Material and Finish
Shells and Bodies — Brass, nickel
plated
Collars — Phosphor bronze, white
bronze plated
Outer Contacts — Beryllium copper,
nickel plated
Snap-On SMA Series of
RF Connectors
Product Facts
■ Positive snap-on interface
facilitates assembly
■ Intermateable with
competitor product
Center Contacts — Beryllium copper,
gold plated
■ Excellent RF performance to
6 GHz
Dielectrics — PTFE
Electrical Characteristics
Frequency — dc – 6 GHz
Nominal Impedance — 50 ohms
Voltage Rating — 335 Volts (VRMS
max.) @ Sea Level
VSWR — 1.15 : 1 max. @ 6 GHz
Insulation Resistance —
5,000 megohms min.
Insertion Loss — .25 dB Max @ 6 GHz
Dielectric Withstanding Voltage —
1000 Volts (VRMS max.) @ Sea Level
Contact Resistance —
Center Contact — 5 milliohms max.
Outer Contact — 4 milliohms max.
■ Ideal for Communications
and Industrial Applications
Tyco Electronics’ next gen-
eration high performance
including PCB and panel
mount, flexible and semi-
RF products QMA (Snap-On rigid cable, and adapters.
SMA) connectors series
offers the same high quality
and performance currently
found in the standard
Other options can be
reviewed as well, including
additional cable sizes, PCB
surface mounting, and tape
Tyco Electronics SMA series and reel packaging.
but does not require the
The QMA connector series
coupling nut torque.
is a cost effective solution
By integrating a snap-on
for the challenging demands
feature to the design,
of today’s commercial mar-
denser packaging can be
ketplace, with applications
achieved, and the overall
including cellular base sta-
Mechanical Characteristics
Connector Durability —
100 mating cycles
Force to Engage — 27 Newtons
Force to Disengage — 20 Newtons
Retention Force (mated pair) —
60 Newtons min.
applied cost is dramatically
tion, handsets, and test and
reduced. The QMA connec-
measurement. Call your
tor series is excellent for
local sales office or author-
communications as well as
ized distributor for additional
industrial applications. The
information or samples of
QMA offering is designed
the QMA connector series.
for 100 mating cycles, oper-
Cable Retention — Dependent upon
cable type
Tyco Electronics is a lead-
ing supplier of RF and
Microwave connectors and
cable assemblies, and pro-
vides advanced technology
products from well known
and industry leading
ates through 6 GHz, and is
completely intermateable
with competitive QMA offer-
ings. This new QMA prod-
uct is not intermateable with
standard SMA interfaces.
Environmental Characteristics
Temperature Rating —
-40 to +125°C
Vibration — EIA-364-28,
Test Condition VII, Condition D
Shock — EIA-364-27, Method H
QMA connectors are avail-
able in a broad range of
standard configurations,
brands, including AMP and
M/A-COM.
Moisture Resistance — EIA-364-31,
Method III
Thermal Shock — EIA-364-32
Note: Performance specifications
are typical, but may not apply to all
connector types.
Related Product Data
Product Specifiation — 108-2087
Sample Kit — 1654882
QMA
Snap-On
Interface
SMA
Threaded
Interface
Board
124
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
QMA Connectors (Continued)
Semi-Rigid Cable —
Direct Solder Attachment
20.50
[0.81]
Straight Cable Plug
Ref.
Cable
Part Number
1408346-1
RG 402
Ø 10.50
[0.41]
18.70
Ref.
Right-Angle Cable Plug
[0.74]
15.10
Ref.
[0.60]
8.71
[0.34]
Cable
Part Number
1408347-1
RG 402
Ø 10.50
[0.41]
14.60
[0.57]
Ref.
10.24
[0.40]
23.05
[0.91]
Straight Cable Jack
18.05
[0.71]
Cable
Part Number
1408348-1
RG 402
Ø 8.00
Ø 5.60
[0.31]
[0.22]
7.00
[0.28]
2.00
[0.08]
16.05
[0.63]
Bulkhead Cable Jack
3.20
[0.13]
Max. Panel
Cable
Part Number
1408349-1
RG 402
Ø 7.20
[0.28]
Ø 5.60
[0.22]
Min.
9.50
[0.38]
6.46
[0.25]
Hex.
Across Flat
6.50
[0.26]
Min.
9.50
Hex.
[0.38]
Recommended Mounting Hole
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
125
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
QMA Connectors (Continued)
Flexible Cable — Crimp
Attachment
A Ref.
Cable
Dim. A
Part Number
1408333-1
RG 174,
188, 316
22.90
0.90
Straight Cable Plug
22.90
RD 316
RG 400
RG 58
1408333-3
1408333-5
1408333-7
0.90
25.20
0.99
Ø 10.50
[0.41]
25.20
0.99
18.70
[0.74]
Ref.
Right-Angle Cable Plug
15.10
[0.60]
Ref.
8.71
[0.33]
9.10
[0.36]
Ref.
Plane
Ø 10.50
[0.41]
Cable
Dim. A
Dim. B
Part Number
1408336-1
RG 174,
188, 316
17.20
0.68
13.10
0.52
A Ref.
17.20
13.10
B
RD 316
RG 400
RG 58
1408336-3
1408336-5
1408336-7
0.68
0.52
19.50
0.77
15.40
0.61
19.50
0.77
15.40
0.61
A Ref.
Straight Cable Jack
18.05
[0.71]
Cable
Dim. A
Part Number
1408338-1
RG 174,
188, 316
25.90
1.02
Ø 8.00
[0.31]
Ø 5.60
[0.22]
25.90
RD 316
RG 400
RG 58
1408338-3
1408338-5
1408338-7
1.02
28.20
1.11
28.20
1.11
Cable
Dim. A
Part Number
16.05
[0.63]
Max. Panel
Bulkhead Cable Jack
A Ref.
RG 174,
188, 316
9.90
0.39
3.20
[0.13]
1408339-1
1408339-3
1408339-5
1408339-7
2.00
[0.08]
9.90
0.39
RD 316
RG 400
RG 58
12.20
0.48
Ø 5.60
[0.22]
12.20
0.48
9.50
[0.38]
6.46
[0.25]
Hex.
Across Flat
9.50
Hex.
[0.38]
6.50
[0.26]
Min.
Ø 7.20
[0.28]
Note: Part Numbers are RoHS
compliant except:ꢀ Indicates
non-RoHS compliant.
Recommended Mounting Hole
126
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
QMA Connectors (Continued)
Printed Circuit Board
Straight Jack Receptacle
15.10
[0.60]
6.35
[0.25]
Sq.
5.08
[0.20]
Typ.
11.00
[0.43]
5.08
[0.20]
Typ.
Ø 1.70
[0.07]
Typ.
Ø 1.27
[0.05]
Ø 5.60
[0.22]
Part Number
1408332-1
1.02
[0.04]
Sq. Typ.
Recommended Mounting Hole
6.35
[0.25]
Sq.
13.60
[0.54]
9.50
Right-Angle Jack Receptacle
5.08
[0.20]
Typ.
5.08
[0.20]
Typ.
[0.37]
Ø 1.70
5 Plcs.
[0.07]
15.60
[0.61]
12.40
[0.49]
1.02
[0.04]
Sq. Typ.
Part Number
1408337-1
Recommended Mounting Hole
5.60
[0.22]
Dia.
9.95
5.00
[.392]
[.197]
Straight Terminal
Press-In Jack
2.00
[.079]
± 0.05
0.75
4.50
[.177]
± .002
1.20
[.030
]
[.047]
± 0.03
± .001
4.00
[.157]
Ø 6.83
[.269
]
Body Material
& Finish
Contact
Captivation
RF Leakage
db min.
Temperature
Range
Part
No.
Brass, Gold
Mechanical
N/A
–65 to 125° C
619215-1
Note: Part Numbers are RoHS compliant except:lIndicates non-RoHS compliant.
127
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
QMA Connectors (Continued)
Straight Terminal
12.70
[0.50]
17.90
[0.70]
13.55
[0.53]
Sq.
8.64
[0.34]
15.00
[0.60]
4-Hole Flange Mount
Jack Receptacle
1.53
[0.06]
Typ.
Ø 5.60
[0.22]
Ø 1.27
[0.05]
Part Number
1408341-1
Ø 4.06
[0.16]
Ø 2.60
[0.10]
4 Plcs.
20.00
[0.79]
Screw-In Front Mount
Jack Receptacle
10.70
[0.42]
4.10
[0.16]
Part Number
1408340-1
1.90
[0.07]
1.50
[0.59]
Ø 1.27
[0.05]
Ø 5.60
[0.22]
Ø 4.06
[0.16]
8.00
[0.31]
Hex.
.250 - 36 UNS-24
Adapters — In Series
QMA Plug to QMA Jack
27.70
[1.09]
Ref.
Part Number
1408342-1
QMA Jack
QMA Plug
Adapters — Between Series
QMA Plug to SMA Plug
30.60
[1.20]
Ref.
Part Number
1408393-1
SMA Plug
QMA Plug
7.90
[0.31]
8.70
[0.34]
Hex.
Hex.
21.50
[0.85]
Ref.
QMA Jack to SMA Plug
Part Number
1408343-1
SMA Plug
QMA Jack
Note: Part Numbers are RoHS
compliant except:ꢀ Indicates
non-RoHS compliant.
6.35
[0.25]
7.90
[0.31]
Hex.
Hex.
128
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Series 1.0/2.3 (50 Ohm/75 Ohm)
Miniature coaxial connec-
tors series 1.0/2.3 (CECC
22230 and IEC 61169-29)
coaxial connectors are
devised to meet the
requirements of compact
electronic instrumentation.
All plugs and jacks with
accessories, adapters as
The reduced dimensions of
all component parts of these
connectors permit a com-
pact hole spacing (installa-
tion pitch) of 6.8 [0.27]
depending upon the corre-
sponding cable diameters.
well as terminations is
available. The quality-
determining factors have
been established on the
basis of corresponding
measurements and test
procedures in accordance
with national and interna-
tional standards for RF
connectors (IEC 61169-1,
MIL-C-39012 etc.).
The cable is connected by
crimping the cable braid to
the plug or jack body, the
inner conductor is soldered
or crimped.
Z
= 50 Ω are designed for
o
a number of different 50 Ω
and 75 Ω cables. Owing
to the large demand, the
Series 1.0/2.3 has also
High-quality materials
In most applications, the
plug and jack belong to the
same coupling type group.
In special instances, such
as for measurement pur-
poses, different coupling
types can be used together.
been optimized as a 75 Ω
design into the GHz range.
The different types of
coupling mechanisms, such
as screw on, slide-in and
latching coupling permit
space-saving installation.
ensure high reliability even
in industrial atmospheres.
The contact principle is the
pin-socket principle and the
contacts are gold plated to
ensure perfect contact mat-
ing. The inner conductor
parts are held in PTFE
In addition, an extensive
range of measurement
(Polytetrafluoroethylene).
Between Series Adapters
For Series 1.0/2.3 Adapters please see
pages 251-260.
129
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
specified. Values in brackets
are standard equivalents.
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Series 1.0/2.3 (50 Ohm/75 Ohm) (Continued)
Type A
Technical Data
Coupling Types
Screw coupling; version
with union nut
Electrical and mechanical
characteristics in accordance
with CECC 22230
Characteristic impedance —
50 Ω/75 Ω
This type permits the plug
and jack to be screwed
together manually by
means of a union nut
secured to the plug. This
is necessary for readily
accessible locations, front
panel test points and cable
connections.
Frequency range — up to 10 GHz/
2 GHz
Reflection factor, referred to
50 Ω cable1 —
up to 1 GHz, r ≤ 0.05
up to 4 GHz, r ≤ 0.07
up to 10 GHz, r ≤ 0.15
Reflection factor, referred to
75 Ω cable1 —
up to 2 GHz, r ≤ 0.10
Insulation resistance —
initial value ≥ 1 GΩ
after stressing ≥ 200 MΩ
Screening effectiveness2 —
≥ 90 dB
Inner conductor contact resistance
— after stressing ≤ 10 mΩ
Outer conductor continuity —
after stressing ≤ 7.5 mΩ
Voltage proof3 —
flexible cables (RG 316)
Type C
Slide-in coupling; version
with centering ferrule
In this type of coupling, the
plug features a guide ferrule
with a conical entry surface.
This ensures that the float-
able bulkhead plugs with
cable connection make a
reliable electrical connec-
tion to the rigid installed
jack. Examples of this are
single and multi-contact
connections of slide-in
applications. “W” denotes
the allowed spacing of the
mounting panel for satisfac-
tory contact when the con-
nection is made.
— at sea level, 750 V, 50 Hz
— at 20 km altitude, 150 V, 50 Hz
Working voltage3 —
flexible cables (RG 316)
— at sea level, 350 V, 50 Hz
— at 20 km altitude, 65 V, 50 Hz
Service life — 500 cycles
Climatic category — 40/85/21
Notes:
1 Guide values, depending on cable
type and connector style.
2 Values apply to a straight screw
and latching coupling with suitable
cable.
3 Some cables suitable for use with
these connectors have lower char-
acteristic values than specified
here.
4 For applicable cable types see
page 151.
Type F
Latching coupling (Quick
Lock)
tion can be easily separated
by lightly pulling the outer
sleeve of the plug. This type
of coupling can be used
with a higher packing den-
sity, as the screw coupling.
In this version, the cable
plugs bear a funnel ferrule
with built-in spring which
snaps into a groove on the
jack, simultaneously locking
the connection. The connec-
130
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Series 1.0/2.3, 50 Ohm
Ø 6.5
[0.26]
Plugs, Solder/Crimp
Cable
Coupling Type
Ø Max.
Part No.
2.67
0.105
RG 316
A
1393670-1
18.0
[0.71]
1)
1) Detent for jack
Ø 3.10
[.122]
Cable
Coupling Type
Ø Max.
Part No.
619223-1
Ø 7.70
[.303]
2.67
0.105
WP93385L2
F
Ø 6.20
[.244]
24.64
[.970]
Ø 3.10
[.122]
Cable
Coupling Type
Ø Max.
Part No.
619224-1
Ø 7.70
[.303]
2.67
0.105
LMR 240
F
Ø 6.20
[.244]
24.64
[.970]
Ø 4.15
[.163]
Cable
Coupling Type
Ø Max.
Part No.
Ø 7.90
[.311]
Max.
6.3
0.248
LMR 240FR
F
1460010-1
Ø 7.90
[.311]
28.50
[1.122]
Max.
Ø 3.10
[.122]
Cable
Coupling Type
Ø Max.
Part No.
619085-1
Ø 7.90
[.311]
Max.
6.3
0.248
WP93385L2
F
Ø 6.20
[.244]
25.50
[1.004]
Max.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
131
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Series 1.0/2.3, 50 Ohm (Continued)
Bulkhead Jack,
Solder/Crimp
17.0
[0.67]
Ø 3.6
[0.14]
Cable
Coupling Type
Ø Max.
Part No.
2.6
0.10
RG 316
A, C, F
4-1393670-4
Ø 1.7
Ø 4.1
[0.07]
[0.16]
Ø 7.3
[0.29]
Bulkhead Solder Jack
Ø 4.1
[0.16]
Coupling Type
Part No.
C, F
1393670-8
0.6
1.5
[0.02]...[0.06]
Mounting Panel
8.0
8.4
[0.31]
[0.33]
Vertical PC Board
Mount Jack
5.08 Ø 0.9
[0.2] [0.04]
6.0
[0.24]
Ø 4.1
[0.16]
Coupling Dim
Part
No.
Type
a
14.6
0.95
[0.04]
C, F
3-1393670-4
3-1393670-5
0.5
[0.02]
0.57
2.54
Pitch
11.1
[0.44]
a
15.6
0.61
[0.10]
C, F
Ø 1.5
[0.06]
Recommended Mounting Holes
19.5
[0.77]
16.0
[0.63]
0.5
[0.02]
Vertical PC Board Mount
Bulkhead Jack
0.95
[0.04]
Coupling Type
Part No.
M5.5x0.5
[0.22]x[0.02]
A, C, F
3-1393670-6
2.54
[0.10]
Pitch
Ø 0.9
[0.04]
5.08
[0.2]
12.0
[0.47]
Ø 1.5
[0.06]
6.0
[0.24]
Recommended Mounting Holes
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
132
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Series 1.0/2.3, 50 Ohm (Continued)
15.9
[0.63]
Right-Angle PC Board
Mount Bulkhead Jack
5.9
[0.23]
7.0
[0.28]
Coupling Type
Part No.
A, C, F
3-1393670-9
7.3
7.4
[0.29]
[0.29]
Ø 4.1
[0.16]
M5.5x0.5
[0.22]x[0.02]
2.54
[0.10]
Pitch
Ø 0.55
[0.02]
0.55
3.7
[0.15]
Ø 1.0
[0.04]
3.3
[0.13]
Inner Conductor
[0.02]
3.6
[0.14]
Recommended Mounting Holes
15.00
[.591]
5.28
Vertical PC Board Mount
ACTION PIN Jack
5.08
[.200]
6.10
[.240]
± 0.08
± .003
4 Plcs.
Ø 1.00
[.039
Coupling Type
Part No.
[.208]
]
C, F
6274431-1
± 0.08
Ø 1.47
[.058
Compliant Pin
4 Plcs.
5.08
[.200]
± .003
]
4 Plcs.
Center
Contact
Recommended Mounting Holes
5.20
[.205]
23.35
[.919]
5.08
[.200]
6.00
13.35
[.236]
[.526]
Ø 1.00
[.039]
Coupling Type
Part No.
619107-1
5 Plcs.
A, C, F
Ø 9.00
[.354]
5.08
[.200]
M5.5 x 0.5
Recommended
Mounting Holes
6.45
[.254]
± 0.05
± 0.08
10.37
3.18
[.125
Panel Mount, Press-in,
Launcher Jack
± .002
± .003
]
[.408
]
± 0.25
± .010
2.79
[.110
]
Coupling Type
Part No.
1274449-1
A, C, F
± 0.038
± .001
Ø 5.52
[.217
± 0.05
3.05
[.120]
Ø 7.62
[.300
]
± .002
]
Over Knurl
± 0.013
± .0005
Ø 1.27
[.050
M5.5 x 0.5
Thread
]
± 0.08
17.91
[.705]
12.95
[.510
12.70
Sq.
Panel Mount, 4-Hole
Flange, Launcher Jack
± .003
]
[.500]
8.64
[.340]
14.99
[.590]
1.65
[.065]
4.32
[.170]
M5.5 x 0.5
Thread
Coupling Type
Part No.
A, C, F
1274520-1
± 0.06
± 0.03
Ø 2.59
[.102
Ø 1.27
[.050
4 Plcs.
± .002
± .001
]
]
5.00
[.197]
12.10
[.476]
Front Mount,
Bulkhead Jack
Coupling Type
A, C, F
Part No.
1274594-1
Ø 4.06
[.160]
± 0.25
M5.5 x 0.5
Thread
15.00
[.591
± .010
]
Note: Part Numbers are RoHS
compliant except:ꢀ Indicates
non-RoHS compliant.
Ø 1.27
[.050]
± 0.50
18.00
[.710
0.80
[.032]
± .020
]
133
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Series 1.0/2.3, 50 Ohm (Continued)
Right-Angle PC Board
Mount Bulkhead Jack
± 0.15
± 0.15
20.54
[.809
19.40
[.764
± .006
± .006
]
]
± 0.15
± 0.15
15.90
17.04
[.671
3.70
[.146]
± .006
± .006
]
[.626
]
1.15
[.045]
Min.
7.3
[0.29]
3.70
[.146]
7.00
[.276]
Ø 6.00
[.236]
7.40
[.291]
Ø 7.34
[.289]
2.54
[0.10]
6.45
[.254]
11.40
[.449]
Pitch
Ø 1.0
[0.04]
6.45
[.254]
3.00
5.63
[.222]
[.118]
3.00
[.118]
Recommended Mounting Holes
Part Number 1274544-1
Part Number 1460060-1
Coupling Type
A, C, F
Part No.
1274544-1
1460060-1
A, C, F
Plating
Outer Body — Silver
15.90
[.626]
3.60
[.142]
Outer and Center Conductor —
Gold
7.00
[.276]
M5.5 x 0.5
Coupling Type
Part No.
2.54
Pitch
[0.10]
A, C, F
1460139-1
3.70
[.146]
Ø 1.0
[0.04]
0.55
[.022]
3.30
[.130]
Recommended Mounting Holes
Series 1.0/2.3, 75 Ohm
Plugs, Solder/Crimp
Ø 6.5
[0.26]
Cable
Coupling Type
Ø Max.
Part No.
2.67
0.105
RG 179
A
5-1393670-5
18.0
[0.71]
1)
1) Detent for jack
Cable
Coupling Type
Ø Max.
Part No.
Ø 7.9
26
2.67
0.105
[0.03]
[1.02]
RG 179
F
6-1393670-2
3.2
ST 212
F
F
6-1393670-5
6-1393670-4
0.13
02Y(St)CY
0.45/2.0
3.6
0.14
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
134
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Series 1.0/2.3, 75 Ohm (Continued)
29.70
Ref.
Straight Plugs,
Solder/Crimp
[1.169]
26.00
[1.024]
7.80
[.307]
Ref.
± 0.05
± .002
Ø 4.45
[.175
]
Cable
Coupling Type
Ø Max.
Part No.
619226-1
BELDEN
1855A
2.67
0.105
A, C, F
± 0.010
± .0004
Ø 0.64
[.025
]
± 0.10
± .004
1.00
[.039
Ø 7.30
[.287]
Ø 5.40
[.213]
]
7.85
[.309]
Cable
Coupling Type
Ø Max.
Part No.
2.67
0.105
BT 3002
A, C, F
1460815-1
12.00
[.472]
Max.
Ø 2.10
[.083]
7.60
[.299]
Max.
Ref. Plane
37.00
[1.457]
22.5
[0.89]
Right-Angle Plug,
Solder/Crimp
Ø 7.9
[0.31]
4.1
[0.16]
Cable
Coupling Type
Ø Max.
Part No.
2.67
RG 179
F
2-1393670-6
15.7
[0.62]
0.105
02Y(St)CY
0.45/2.0
3.6
0.14
Ø 6.5
[0.26]
F
7-1393670-0
23.00
[.906]
Max.
Cable
Coupling Type
Ø Max.
Part No.
619228-1
2.8
0.110
16.00
RG 316
F
[.630]
Ref.
Ø 8.30
[.327]
Max.
23.00
[.906]
Max.
Cable
Coupling Type
Ø Max.
Part No.
23.00
[.906]
Max.
2.67
0.105
RA 7000
A, C, F
1460817-1
Ø 7.90
[.311]
Max.
Ø 3.05
[.120]
Ø 6.10
[.240]
Ø 4.1
[0.16]
Bulkhead Jack,
Solder/Crimp
Cable
Coupling Type
Ø Max.
Part No.
2.67
0.105
RG 179
A, C, F
8-1393670-0
Ø 6.6
[0.26]
0.6
1.5
[0.02]...[0.06]
Mounting Panel
12.0
[0.47]
13.5
[0.53]
BELDEN is a trademark of Belden Wire
and Cable Company.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
135
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Series 1.0/2.3, 75 Ohm (Continued)
16.8
[0.66]
13.4
[0.53]
3.6
[0.14]
Right-Angle Bulkhead Jack,
Solder/Crimp
Ø 4.1
[0.16]
Cable
Coupling Type
Ø Max.
Part No.
2.67
0.105
RG 179, 316
A, C, F
3-1393670-2
12.7
[0.5]
Ø 7.3
[0.29]
21.0
[0.83]
17.5
[0.69]
0.5
[0.02]
Vertical PC Board Mount
Bulkhead Jack
0.95
[0.04]
M5.5x0.5
[0.22]x[0.02]
2.54
[0.10]
Pitch
Ø 0.9
[0.04]
5.08
[0.2]
12.0
[0.48]
Ø 7.3
[0.29]
6.0
[0.24]
Ø 1.5
[0.06]
Recommended Mounting Holes
Coupling Type
Part No.
A, C, F
8-1393670-3
PC Board Mount
Bulkhead Jack
22.30
[.878]
± 0.12
12.00
[.472]
5.80
4.80
[.189
± .005
]
0.50
5.08
[.200]
[.228]
Min.
[.020]
Ø 0.90
[.035]
Ø 7.30
[.287]
0.5
[.020]
M5.5 x
2.54
[0.10]
Pitch
3.00
[.118]
0.95
[.037]
Sq.
Ø 1.5
[0.06]
6.50
[.256]
2.30
[.091]
0.20
[.008]
Min.
Recommended Mounting Holes
Coupling Type
Ø Max.
Part No.
619220-1
1.00-2.30
.039-.091
A, C, F
Vertical PC Board Mount
Bulkhead Jack
23.35
[.919]
5.08
[.200]
6.00
13.35
[.236]
[.526]
Ø 1.00
[.039]
5 Plcs.
Coupling Type
Part No.
619106-1
Ø 9.00
[.354]
A, C, F
5.08
[.200]
M5.5 x 0.5
Recommended
Mounting Holes
6.45
[.254]
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
136
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Series 1.0/2.3, 75 Ohm (Continued)
Straight PCB Jacks,
Multi-Port
No. of Ports
Coupling Type
A, C, F
Part No.
1274714-3
1274714-2
1274714-1
2
3
4
A, C, F
A, C, F
10.00
20.00
[.394]
[.787]
4.00
4.00
4.00
[.157]
[.157]
[.157]
23.10
23.10
23.10
[.307]
[.307]
[.307]
11.00
[.433]
2 Plcs.
11.00
[.433]
3 Plcs.
11.00
[.433]
4 Plcs.
19.00
[.748]
29.00
[1.142]
39.00
[1.535]
8.00
[.315]
8.00
[.315]
8.00
[.315]
6.00
[.236]
6.00
[.236]
6.00
[.236]
10.00
[.394]
10.00
[.394]
5.00
[.197]
10.00
[.394]
15.00
[.591]
15.00
[.591]
Part Number 1274714-3
Part Number 1274714-2
Part Number 1274714-1
10.00
[.394]
Typ.
Ø 1.53
[.060]
2 Plcs.
1.80
[.071]
2 Plcs.
R 0.765
[.030]
4 Plcs.
± 0.05
8.00
.002
[.315 ±
]
± 0.05
4.20
5.00
[.197]
Typ.
Ø 2.20
[.087]
4 Plcs.
.002
[.165 ±
]
10.00
[.394]
Typ.
Recommended PC Board Layout
2 Positions Shown
4.8
[0.19]
Accessories
for 50 Ohm and 75 Ohm
2.4
[0.09]
5.0
[0.20]
Soldering aid (sleeve) for jack 1393670-8 with solder connection.
Part No.
2-1393562-2
For cable size similar to RG 179
and RG 316
3.5
[0.14]
0.8
[0.03]
2.1
[0.08]
Tin-Soldered
Installation example:
+ 0.00
3.5
– 0.50
+ .000
– 0.02
+ 0.00
5.5
– 0.50
+ .000
– 0.02
[0.14
]
[0.22
]
+ 0.00
8.5
– 0.50
+ .000
– 0.02
[0.33
]
Sleeve Pushed onto
Shielding Braid
Note: For more accessories, see
page 147.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
137
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Series 1.6/5.6 mS (75 Ohm)
tions. All types of this new
Connectors are available in
straight and angled ver-
sions as well as with differ-
ent mechanisms for screw
(type A), snap-on (type B),
slide-in (type C), and latch-
ing (type F) coupling. All
connectors of different cou-
pling mechanisms are com-
patible with each other.
General
“third generation” Series
1.6/5.6 mS connectors are
connection-compatible with
their predecessor.
The Series 1.6/5.6 mS con-
nectors have been modified
to incorporate improved
technical advantages.
Transmission values have
been greatly improved
while maintaining the
Today’s PCM technology
demands place the Series
1.6/5.6 mS connectors as a
most suitable component for
transmission of high bit rates.
proven positive characteris-
tics of the previous genera-
Plug
Jack
9.7
[0.38]
9.2
[0.36]
6.7
[0.26]
Ø 5.6
[0.22]
Ø 2.5
[0.10]
M9x0.5
[0.35]x[0.02]
Ø 8.25
[0.32]
M9x0.5
[0.35]x[0.02]
Ø 6.6
[0.26]
0.25
[0.01]
Between Series Adapters
For Series 1.6/5.6 Adapters please see
pages 253-262.
Ø 1.0
[0.03]
5.5
[0.22]
4.1
[0.16]
7.0
[0.28]
6.5
[0.26]
The connectors are
The cable inner conductors
are soldered on, while the
outer conductors are
screwed or crimped on.
Also, cable clamp which is
independent of the braid
clamping secures the con-
nection point against tensile
stressing for both methods
of connection.
the scope of delivery. The
connectors are character-
ized by high mechanical
strength and low space
requirement.
designed according to the
pin-socket principle. The
contacts are partially gold-
plated, ensuring long serv-
ice life and stable contact
resistance for a high num-
ber of intermateability
cycles.
Connection possibilities
exist for a number of differ-
ent cables, including
highly-flexible cable types
(with foam insulation) with
low attenuation or small
diameter. Terminations and
adapters (see also meas-
The inner conductor parts
are secured so that they
cannot be displaced. The
In addition, assembly-
friendly connectors with full
insulating parts are made of crimp and IDC (Insulation
PEEK (polyetheretherke-
Displacement Contact) con- urement accessories) round
tone) or PC (polycarbonate). nection are included within
out the spectrum.
138
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Series 1.6/5.6 mS (75 Ohm) (Continued)
Type A
Technical data
Coupling Types
Screw coupling; version
with union nut
Electrical and mechanical
characteristics in accordance
with CECC 22240
Characteristic impedance — 75 Ω
Frequency range — up to 8 GHz
Reflection factor1, referred to —
flexible cables, straight types —
up to 1 GHz, r ≤ 0.02
up to 4 GHz, r ≤ 0.06
up to 8 GHz, r ≤ 0.10
This type permits the plug
and jack to be screwed
together manually by means
of a union nut secured to
the plug manually, thus pre-
venting the coupling from
being pulled apart. This is
necessary for readily acces-
sible locations, front panel
test points and cable con-
nections.
flexible cables, angled types —
up to 1 GHz, r ≤ 0.04
up to 2 GHz, r ≤ 0.06
up to 4 GHz, r ≤ 0.10
Insulation resistance —
initial value, ≥ 10 GΩ
after stressing, ≥ 1 GΩ
Type B
Snap-on coupling (push-pull)
Screening effectiveness —
(straight screw connector at 1 GHz)
≥ 100 dB
Inner conductor contact
resistance — after stressing ≤ 8 mΩ
Outer conductor continuity — after
stressing ≤ 4 mΩ
Voltage proof2 —
flexible cables (RG 59) —
at sea level, 1.5 kV, 50 Hz
at 20 km altitude, 300 V, 50 Hz
Connectors of this type offer
fast make/break. They can
be used for test and mainte-
nance applications and also
if there is lack of space and
connectors with screw cou-
pling cannot be used.
Working voltage2 —
flexible cables (RG 59) —
at sea level, 500 V, 50 Hz
at 20 km altitude, 125 V, 50 Hz
Service life — 500 cycles
Climactic category — 40/85/21
Type C
Slide-in coupling; version
with centering ferrule
In this type of coupling, the
plug features a guide ferrule
with a conical entry surface.
This ensures that the float-
able bulkhead plugs with
cable connection make a
reliable electrical connec-
tion to the rigid installed
jack. Examples of this are
single and multi-contact
connections of slide-in
Notes:
1 Guideline values, depending on
cable type and connector style.
2 Some cable types suitable for use
with these connectors have lower
characteristic values than specified
here.
3 For applicable cable types see
page 151.
applications. “W” denotes
the allowed spacing of the
mounting panel for satisfac-
tory contact when the con-
nection is made.
Type F
Latching coupling (Quick
tion can be easily separated
by lightly pulling the outer
sleeve of the plug. This type
of coupling provides the
same amount of axial tensile
strength as the screw cou-
pling, but can be used with
a higher packing density.
Lock)
In this version, the cable
plugs bear a funnel ferrule
with built-in spring which
snaps into a groove on the
jack, simultaneously locking
the connection. The connec-
139
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Series 1.6/5.6 mS (75 Ohm) (Continued)
Plugs, Solder/Clamp
37.0
[1.46]
Cable
Coupling Type
Ø Max.
Part No.
2YCCY
7.8
0.31
Ø 10.8
[0.43]
Ø 10.8
A
1393682-1
0.7/4.4
[0.43]
37.0
[1.46]
Cable
Coupling Type
Ø Max.
Part No.
2YCCY 1.0/6.5
9.8
0.31
Ø 10.8
Ø 12.8
[0.50]
A
1393682-2
2YC(mS)CY 1.0/6.5
[0.43]
Coupling
Type
Dim.
a
Cable
Ø Max.
Part No.
a
30.7
1.21
4.1
0.16
2YCY 0.4/2.5
A
1-1393682-1
30.7
4.8
2YCCY 0.4/2.5
A
A
A
A
A
1.21
0.19
Ø 10.8
[0.43]
Ø 10.8
[0.43]
1-1393682-2
1-1393682-3
30.7
1.21
5.0
0.20
2YC(mS)CY 0.4/2.5
32.9
1.30
6.1
0.24
2YCY 0.7/4.4
RG 59
32.9
1.30
6.25
0.25
32.9
1.30
6.2
0.24
2YC(mS)CY 0.5/3.0
30.2
[1.19]
Cable
Coupling Type
Ø Max.
Part No.
3.6
0.14
Ø 11.5
[0.45]
Ø 10.8
[0.43]
02Y(St)CY 0.45/2.0
F
1393681-8
Plugs, Solder/Crimp
Coupling
Type
Dim.
Cable
Ø Max.
Part No.
a
a
32.5
1.28
2.6
0.105
RG 179
A
A
A
A
A
A
1393680-2
32.5
1.28
4.8
0.19
2YCCY 0.4/2.5
Ø 10.8
[0.43]
Ø 10.8
[0.43]
1393680-3
35.5
1.40
5.0
0.20
2YC(mS)CY 0.4/2.5
35.5
1.40
6.2
0.24
2YC(mS)CY 0.5/3.0
2YCY 0.7/4.4
1393680-4
1393680-5
1393680-9
35.5
1.40
6.1
0.24
32.5
1.28
3.6
0.14
02Y(St)CY 0.45/2.0
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
140
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Series 1.6/5.6 mS (75 Ohm)
32.0
[1.26]
Plugs, Solder/Crimp
(Continued)
Version with Preassembled Insulation
Ø 10.8
[0.43]
Ø 11.5
[0.45]
Cable
Coupling Type
Ø Max.
Part No.
3.6
0.14
02Y(St)CY 0.45/2.0
F
1393672-3
32.0
[1.26]
Preassembled Isolation Parts
Ø 10.8
[0.43]
Ø 11.5
[0.45]
Cable
Coupling Type
Ø Max.
Part No.
3.6
0.14
02Y(St)CY 0.45/2.0
F
1393672-9
35.00
[1.378]
Ø 3.80
[.150]
Preassembled Version
Cable
Ø 11.80
[.465]
Coupling Type
Ø Max.
Part No.
2.9
0.11
02YS(St)CHH 0.25/1.2
F
1460132-1
Ø 1.30
[.051]
Min.
Right-Angle Plugs,
Solder/Crimp
24.7
[0.97]
Coupling
Type
Dim.
a
Cable
Ø Max.
Part No.
13.0
0.51
4.8
0.19
2YCCY 0.4/2.5
2YC(mS)CY 0.4/2.5
2YCY 0.7/4.4
RG 59
A
A
A
A
A
Ø 10.8
[0.43]
2-1393682-0
13.0
0.51
5.0
0.20
15.8
0.62
6.1
0.24
a
15.8
0.62
6.25
0.25
2-1393682-2
Ø 10.8
[0.43]
15.8
0.62
6.2
0.24
2YC(mS)CY 0.5/3.0
24.7
[0.97]
Cable
Coupling Type
Ø Max.
Part No.
Ø 10.8
[0.43]
2.67
0.105
RG 179
A
2-1393682-3
18.2
[0.72]
Ø 10.8
[0.43]
24.2
[0.95]
Cable
Coupling Type
Ø Max.
Part No.
Ø 11.5
[0.45]
3.6
0.14
02Y(St)CY 0.45/2.0
F
1-1393681-0
13.0
[0.51]
Ø 10.8
[0.43]
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
141
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Series 1.6/5.6 mS (75 Ohm) (Continued)
Right-Angle Plugs,
Solder/Crimp
24.7
[0.97]
Coupling
Type
Dim.
a
Cable
Ø 10.8
Ø Max.
Part No.
[0.43]
02Y12YC(mS)C6Y
15.0
4.0
A
A
1-1393680-6
1-1393680-8
0.45/2.0
0.59
0.16
15.0
0.59
3.6
0.14
02Y(St)CY 0.45/2.0
a
Right-Angle Plugs,
IDC Connection
24.7
[0.97]
Cable
Coupling Type
Ø Max.
Part No.
3.6
02Y(St)CY 0.45/2.0
A
1393757-9
Ø 10.8
[0.43]
0.14
4.1
0.16
2YCY 0.4/2.5
A
1393757-8
17.5
[0.69]
Right-Angle Plug,
Solder/Crimp
25.0
[0.98]
Cable
Coupling Type
Ø Max.
Part No.
3.6
0.14
02Y(St)CY 0.45/2.0
F
1393672-5
Ø 11.5
[0.45]
15.0
[0.59]
Bulkhead Jacks,
Solder/Clamp
Coupling
Type
Dim.
a
Cable
Ø Max.
Part No.
a
14.3
[0.56]
Max.
2.0
[0.08]
Max.
M9.0x0.5
[0.35]x[0.02]
28.1
1.11
4.1
0.16
2YCY 0.4/2.5
2YCCY 0.4/2.5
A, B, F
A, B, F
3-1393682-2
Mounting Panel
28.1
1.11
4.8
0.19
Ø 10.8
[0.43]
Ø 10.8
[0.43]
3-1393682-3
3-1393682-5
28.1
1.11
5.0
0.20
2YC(mS)CY 0.4/2.5 A, B, F
30.4
1.20
6.1
0.24
2YCY 0.7/4.4
RG 59
A, B, F
A, B, F
Ø 8.2
[0.32]
30.4
1.20
6.25
0.25
30.4
1.20
6.2
0.24
2YC(mS)CY 0.5/3.0 A, B, F
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
142
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Series 1.6/5.6 mS (75 Ohm) (Continued)
Bulkhead Jacks,
Solder/Clamp (Continued)
34.5
[1.36]
14.3
[0.56]
Max.
2.0
Max.
M9.0x0.5
[0.08]
[0.35]x[0.02]
Mounting Panel
Cable
Coupling Type
Ø Max.
Part No.
9.8
2YCCY 1.0/6.5
A, B, F
Ø 10.8
[0.43]
0.38
Ø 12.8
[0.50]
1393682-4
9.8
0.38
2YC(mS)CY 1.0/6.5
A, B, F
Ø 8.2
[0.32]
32.5
[1.28]
10.6
[0.42]
2.5
M9.0x0.5
[0.35]x[0.02]
Max.
[0.10]
Mounting Panel
Cable
Coupling Type
Ø Max.
Part No.
Ø 10.8
[0.43]
Ø 10.8
[0.43]
2.67
0.105
RG 179
B, C, F
4-1393682-2
Ø 8.2
[0.32]
Bulkhead Jacks, Solder
a
19.4
[0.76]
6.5
[0.26]
19.4
[0.76]
12.0
[0.47]
12.0
[0.47]
3.0
[0.12]
Max.
3.0
[0.12]
Max.
M9.0x0.5
[0.35]x[0.02]
M9.0x0.5
[0.35]x[0.02]
Mounting
Panel
Mounting
Panel
Ø 8.2
[0.32]
Ø 10.8
[0.43]
Ø 8.2
[0.32]
Ø 10.8
[0.43]
8.0
1.7
[0.07]
[0.31]
Ø 0.6
[0.02]
Dim. a
Ø Max.
Part No.
22.3*
A, B, C, F
A, B, C, F
1-1393681-1
1-1393681-9
0.88
Coupling
Type
Part
No.
23.5
0.93
A, B, C, F
1-1393681-3
*Without soldering tags on outer conductor,
dimension a up to inner conductor end.
Bulkhead Jacks,
Solder/Crimp
29.8
[1.17]
14.3
[0.56]
Max.
Cable
Coupling Type
Ø Max.
Part No.
2.0
[0.08]
Mounting Panel
Max.
M9.0x0.5
[0.35]x[0.02]
2.67
0.105
RG 179
A, B, F
2-1393680-2
02Y12YC(mS)C6Y
0.45/2.0
4.0
A, B, F
A, B, F
A, B, F
2-1393680-4
2-1393680-5
0.16
Ø 10.8
[0.43]
Ø 10.8
[0.43]
3.3
0.13
06YCC(St)6Y 0.4/1.6
02Y(St)CY 0.45/2.0
3.6
0.14
0-
1393672-6
Ø 8.2
[0.32]
29.8
[1.17]
2.0
Max.
[0.08]
M9.0x0.5
[0.35]x[0.02]
Mounting Panel
With preassembled insulation parts
Cable
Coupling Type
Ø Max.
Part No.
Ø 10.8
[0.43]
Ø 10.8
[0.43]
3.6
0.14
0-
02Y(St)CY 0.45/2.0
A, B, F
1-1393672-4
Ø 8.2
Crimp Connection
[0.32]
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
143
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Series 1.6/5.6 mS (75 Ohm) (Continued)
Right-Angle Bulkhead Jack,
Solder/Clamp
28.4
[1.12]
13.8
[0.54]
2.0
[0.08]
Max.
Mounting
Panel
Cable
Coupling Type
Ø Max.
Part No.
M9.0x0.5
[0.35]x[0.02]
9.8
0.39
2YCCY 1.0/6.5
A, B, F
1393682-8
9.8
0.39
2YC(mS)CY 1.0/6.5
A, B, F
Ø 8.2
[0.32]
Ø 10.8
[0.43]
21.0
[0.83]
Ø 12.8
[0.50]
27.2
[1.07]
Coupling
Type
Dim.
a
Cable
Ø Max.
Part No.
12.6
[0.50]
13.0
3.6
02Y(St)CY 0.45/2.0
2YCCY 0.4/2.5
A, B, F
A, B, F
4-1393682-9
0.51
0.14
2.0
[0.08]
Max.
Mounting
Panel
13.0
0.51
4.8
0.19
M9.0x0.5
[0.35]x[0.02]
4-1393682-6
4-1393682-8
13.0
5.0
2YC(mS)CY 0.4/2.5 A, B, F
0.51
0.20
Ø 8.2
[0.32]
Ø 10.8
[0.43]
15.8
0.62
6.1
0.24
2YCY 0.7/4.4
RG 59
A, B, F
A, B, F
15.8
0.62
6.25
0.25
a
15.8
0.62
6.2
0.24
2YC(mS)CY 0.5/3.0 A, B, F
Ø 10.8
[0.43]
Right-Angle Bulkhead Jack,
Solder/Crimp
27.2
[1.07]
Coupling
Dim.
a
Cable
Type
Ø Max.
Part No.
12.6
[0.50]
15.0
0.59
2.67
0.105
RG 179
A, B, F
A, B, F
3-1393680-0
2.0
[0.08]
Max.
Mounting
Panel
M9.0x0.5
[0.35]x[0.02]
15.0
0.59
4.8
2YCCY 0.4/2.5
0.19
3-1393680-2
15.0
0.59
5.0
0.20
2YC(mS)CY 0.4/2.5 A, B, F
Ø 8.2
[0.32]
Ø 10.8
[0.43]
02Y12YC(mS)C6Y
A, B, F
15.0
4.0
3-1393680-5
4-1393682-3
0.45/2.0
0.59
0.16
06YCC(St)6Y
A, B, F
15.0
0.59
3.3
0.13
0.4/1.6
a
15.0
0.59
3.6
0.14
02Y(St)CY 0.45/2.0
A, B, F
3-1393680-7
27.2
[1.07]
Max.
Coupling
Type
Dim.
a
Cable
Ø Max.
Part No.
15.0
2.9
02YS(St)CHH 0.25/1.2 A, B, F
02YS(St)CHH 0.25/1.2 A, B, F
Ø 10.8 Ø 8.2
[.43]
[.32]
1460128-1*
0.59
0.11
15.0
0.59
2.9
0.11
*
1460169-1**
a
M9 x 0.5
[.35 x .02]
* Tray Packaging.
** Individual Packaging.
1.35
[.053]
Min.
3.80
[.150]
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
144
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Series 1.6/5.6 mS (75 Ohm) (Continued)
27.2
[1.07]
Right-Angle Bulkhead Jack,
IDC Connection
12.6
[0.50]
2.0
[0.08]
Max.
Mounting
Panel
M9.0x0.5
[0.35]x[0.02]
Ø 8.2
[0.32]
Ø 10.8
[0.43]
17.5
[0.69]
Cable
Coupling Type
Ø Max.
Part No.
1-1393757-6
3.6
0.14
02Y(St)CY 0.45/2.0
A, B, F
29.2
[1.15]
Vertical PC Board
Mount Jack
Recommended
Mounting Holes
View A
4.2
[0.17]
14.4
[0.57]
5.08
[0.20]
1.0
[0.04]
M9.0x0.5
[0.35]x[0.02]
5.08
[0.20]
Ø 0.8
[0.03]
10.8
[0.43]
Ø 9.0
[0.35]
Ø 8.2
[0.32]
10.0
[0.39]
Ø 1.3
2.54
[0.05]
[0.10]
0.8
[0.03]
Pitch
Coupling Type
Part No.
A, B, F
1-1393681-6
b
10.8
Ø 8.2
[0.32]
[0.43]
5.08
[0.20]
a
c
Inner- and outer conductor, press-fit
Coupling Type
Dim. a
Dim. b
Dim. c
Part No.
5.08
[0.20]
6.0
0.24
27.2
1.07
16.4
0.65
A, B, F
2-1393757-0
10.0
[0.39]
M9.0x0.5
[0.35]x[0.02]
Recommended Mounting Holes
2.54
[0.10]
Pitch
1.5
[0.06]
Thickness
Max.
+ 0.09
– 0.06
+ 0.004
– 0.002
Ø 1.0
5 Plcs.
[0.04
]
23.20
[.913]
PC Board Mount
Bulkhead Jack
4.50
[.177]
2.00
[.079]
± 0.05
± 0.13
7.05
[.278
3.00
[.118
Ø 9.00
[.354]
5.60
[.220]
± .002
]
± .005
]
Center Contact
Ø 1.20
Coupling Type
Part No.
[.047]
M9 x 0.5-6g
Thread
A, B, F
1274513-1
Ø 1.50
[.059]
4 Plcs.
5.60
[.220]
Ø 1.00
6.50
[.256]
Ø 10.80
[.425]
Ø 7.00
[.276]
[.039]
Center
Contact
3.00
[.118]
Recommended
Mounting Holes
Typ.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
145
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Series 1.6/5.6 mS (75 Ohm) (Continued)
Right-Angle PC Board
Mount Bulkhead Jack
Ø 8.2
[0.32]
b
Coupling
Type
Dim.
a
Dim.
b
Dim.
c
Dim.
d
Dim.
e
Part No.
4.0
16.0
6.0
10.75
1.3
d
A, B, F
A, B, F
A, B, F
2-1393681-1
2-1393681-2
2-1393681-3*
0.16
0.63
0.24
0.42
0.05
3.3
0.13
16.0
0.63
6.0
0.24
10.75
0.42
1.3
0.05
Ø 1.3
[0.05]
M9.0x0.5
[0.35]x[0.02]
c
3.7
0.15
22.9
0.90
6.45
0.25
11.25
0.44
1.8
0.07
Ø e
4 Plcs.
a
2.54
[0.10]
4.5
[0.18]
Pitch
*With positioning and snap-on system onto PC board
Recommended
Mounting Holes
U-link Plug/Plug
b
a
Dim. a
± 0.1 [0.004]
Dim. b
Max.
Coupling Type
Part No.
15.0
0.59
26.5
1.04
A
6-1460823-1
24.4
[0.96]
Ø 10.8
[0.43]
b
a
Dim. a
± 0.1 [0.004]
Dim. b
Max.
Coupling Type
Part No.
22.3
[0.88]
15.0
0.59
26.5
1.04
B
6-1460823-2
Ø 10.8
[0.43]
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
146
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Series 1.6/5.6 mS (75 Ohm) (Continued)
Accessories
M9.0x0.5
[0.35]x[0.02]
These components are pro-
vided when bulkhead jack
part numbers are ordered,
but can also be ordered
separately.
Threaded ring for installation
of bulkhead jacks
Part No.
1-1393562-0
Ø 10.8
[0.43]
2.3
[0.09]
4.8
[0.19]
2.4
[0.09]
5.0
[0.20]
Soldering aid (sleeve) for jack
(1-1393681-9) with solder
termination
Part No.
2-1393562-2
3.5
[0.14]
Cable stripping and installation
example: see Part number
2-1393562-2 under “Series 1.0/2.3”,
page 137.
0.8
[0.03]
2.1
[0.08]
Measurement Accessories
Between Series Adapters
(75 Ohm)
Ø 6.5
[0.26]
Plug 1.6/5.6 to Plug 1.0/2.3
Ø 10.8
[0.43]
Coupling
Type
Part
No.
1)
1)
9.2
[0.36]
8.9
[0.35]
28.0
[1.10]
A
6-1460821-1
Ø 4.1
[0.16]
Plug 1.6/5.6 to Jack 1.0/2.3
Ø 10.8
[0.43]
Coupling
Type
Part
No.
A, F2
A, F2
2-1393670-2ꢀ
1)
9.2
[0.36]
33.0
[1.30]
6-1460821-2
2 Only jack side
1) Detent for jack
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
147
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Measurement Accessories (Continued)
Between Series Adapters
(75 Ohm) (Continued)
Ø 6.5
[0.26]
Ø 8.2
[0.32]
Plug 1.0/2.3 to Jack 1.6/5.6
Ø 10.8
[0.43]
Coupling
Type
Part
No.
A, B2, F2
6-1460821-3
1)
8.9
34.5
[0.35]
2 Only jack side
[1.36]
1) Detent for jack
Ø 8.2
[0.32]
Ø 4.1
[0.16]
Jack 1.0/2.3 to Jack 1.6/5.6
Ø 10.8
[0.43]
Coupling
Type
Part
No.
39.4
[1.55]
A, B, F
6-1460821-4
BNC Plug to Plug 1.6/5.6
Ø 14.5
[0.57]
Ø 10.8
[0.43]
Part No.
7-1393665-4
46.4
[1.83]
BNC Plug to Jack 1.6/5.6
Ø 14.5
[0.57]
Ø 8.2
[0.32]
Part No.
7-1393665-6
44.3
[1.74]
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
148
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Measurement Accessories (Continued)
Between Series Adapters
(75 Ohm) (Continued)
BNC Jack to Plug 1.6/5.6
Ø 9.6
[0.38]
Ø 14.5 Ø 11.0
[0.57] [0.43]
Ø 10.8
[0.43]
Part No.
7-1393665-7
45.4
[1.79]
M9.0x0.5
[0.35]x[0.02]
BNC Jack to Jack 1.6/5.6
Ø 14.5 Ø 11.0 Ø 9.6
[0.57] [0.43] [0.38]
Ø 8.2
[0.32]
Part No.
7-1393665-5
45.4
[1.79]
Termination (75 Ohm)
Ø 6.5
[0.26]
Standard Termination
Plug 1.0/2.3
Coupling
Type
Power
W
Part
No.
1)
8.9
[0.35]
15.0
[0.59]
A
0.6
7-1393665-2
1) Detent for jack
Ø 4.1
[0.16]
Jack 1.0/2.3
Coupling
Type
Power
W
Part
No.
23.1
[0.91]
Ø 6.5
[0.26]
A, F
0.6
7-1393665-3
29.6
[1.17]
Plug 1.6/5.6
Coupling
Type
Power
W
Part
No.
Ø 10.8
[0.43]
A
1.0
6-1393665-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
149
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Measurement Accessories (Continued)
In-Series Adapter (75 Ohm)
Adapter 1.6/5.6, Plug/Plug
Ø 10.8
[0.43]
Coupling
Type
Part
No.
A
1393681-6
43.8
[1.73]
41.3
[1.63]
Adapter 1.6/5.6, Plug/Jack
Coupling
Type
Part
No.
Ø 10.8
[0.43]
Ø 8.2
[0.32]
A, B*, F*
1-1393681-7
*Jack side only
M9.0x0.5
[0.35]x[0.02]
14.3
[0.56]
Adapter 1.6/5.6, Jack/Jack
Ø 8.2
[0.32]
Ø 10.8
[0.43]
Coupling
Type
Part
No.
A, B, F
1-1393665-1
M9.0x0.5
[0.35]x[0.02]
28.4
[1.12]
Note:
U-link connectors see “1.6/5.6”
section, page 146.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
150
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Coaxial Cables
List of the coaxial cables that are listed in the various
connector series of this section.
Cable-Type Designation
Characteristic
Impedance (Ω)
Max. Cable
Outer Diameter (mm)
Dielectric Diameter (mm)/
Material1)
US Designation
Manufacturer des.
IEC Designation
96-IEC
VDE Designation2)
50
50
50
50
50
50
50
50
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
1.9
2.1
2.25
2.6
2.8
3.0
3.6
6.4
2.67
3.0
3.3
3.2
3.6
4.0
4.0
4.8
5.0
6.1
6.2
6.25
7.8
9.8
9.8
0.91max/PTFE
0.87/PTFE
5YC5Ye 0.3/0.86
—
RG 178
RG 196
RG 405
RG 316
RG 174
RD 316
RG 402
RG 401
RG 179
RD 179
—
50-1-1
50-1-2
—
1.71max/PTFE
1.60max/PTFE
1.60max/PE
1.52/PTFE
5YK 0.51/1.68
5YC5Ye 0.5/1.5
2YCY 0.5/1.5
5YCC5Y 0.5/1.5
5YK 0.9/3.0
5YK 1.63/5.33
5YC6Y 0.3/1.6
—
50-2-1
—
—
3.01max/PTFE
5.38max/PTFE
1.68max/PTFE
1.60max/PTFE
1.68max/Cell-FEP
2.1max
—
—
75-2-1
—
06YCC(St)6Y 0.4/1.6
—
—
ST 212
—
—
2.0max/Cell-PE
2.0maxE/Cell-PE
2.54max/PE
2.54max/PE
2.54max/PE
4.25max/PE
2.83max/PE
3.8max/PE
02Y(St)CY 0.45/2.0
—
02Y12YC(mS)C6Y 0.45/2.0
2YCY 0.4/2.5
—
—
—
—
2YCCY 0.4/2.5
—
—
2YC(mS)CY 0.4/2.5
2YCY 0.7/4.4
—
—
—
—
2YC(mS)CY 0.5/3.0
2YCY 0.58/3.7
—
—
RG 59
—
—
4.43max/PE
6.4/PE
2YCCY 0.7/4.4
—
2YCCY 1.0/6.5
—
—
6.4/PE
2YC(mS)CY 1.0/6.5
—
—
1) Material label
PTFE
Polytetrafluorethylene
Polyethylene
PE
FEP
PFA
Perfluorethylene propylene
Perfluoralkoxy copolymer
2) Mounting label of the VDE type numbers (from inside to outside)
Example:
Explanation
Screen:
Specifications on inner
conductor:
Dielectric and Jacket
2Y = PE
Jacket color:
C = Cu braiding
gn = green
gr = grey
rt = red
K = Cu tape
vs = silver plated
5Y = PTFE
staku = Bare copper-clad
steel wire
02Y = Cell PE
06Y = Cell FEP
6Y = FEP
Intermediate layer:
mS = magnetic screen
St = static screen
ws = white
conductor
6Y
C
(mS)
C
Y
0.7/4.0 -75
(r2/100) vs gr
Dielectric
1st screen
Intermediate layer
2nd screen
Outer jacket
Diameter inner conductor/dielectric
Characteristic impedance
Max. reflection (r) in % / frequency in MHz
Specifications on inner conductor and/or jacket color
151
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMP Microminiature Push-On Coaxial Connectors
Product Facts
■ Intermateable with
Corning Gilbert GPO Series
Connector
■ DESC approved
■ Enhanced performance
features
■ Simplified Assembly
SMP microminiature push-on SMP connectors can be
1.15:1 max thru 26GHz and
1.40:1 max thru 40GHz.
coaxial connectors provide
solutions for today’s modu-
lar designs with denser
packaging requirements.
The extremely small size of
the SMP offers a versatile
solution for high density
packaging allowing
connector center-to-center
spacing of 4.32 [0.17]. The
push-on interface facilitates
easier assembly and test
with a positive snap-in fea-
ture to indicate a fully
your design solution for
mechanical packaging and
frequency response. The
SMP interface provides
0.020" of radial misalign-
ment for critical blindmate
applications. Mating forces
are strictly controlled to
ensure reliable connections
per mated pair or when
simultaneously mating mul-
tiple connectors. Cable
jacks include an anti-rock-
ing ring to ensure reliable
mechanical performance
regardless of the operating
environment. SMP connec-
tors offer enhanced broad-
band VSWR performance of
Standard design SMP
configurations include
cable connectors, straight
and right-angle, for 0.047
and 0.085 semi-rigid cable,
full detent, limited detent
and smooth bore mating
shrouds that can be bulk-
head or flange mounted
and glass feedthroughs for
coax to circuit launchers.
In-series adapters for mod-
ule to module intermating
and between series
Between Series Adapters
For SMP Between Series Adapters,
see pages 253-262.
mated connection. The
rugged SMP interface can
withstand harsh environ-
ments of mechanical shock
and vibration, typically
adapters for integrating
or testing systems or
components parameters.
found in military or aero-
space related applications.
This SMP connector inter-
face is the standard used
by Defense Electronics
Supply Center (DESC) to
generate the SMP push-on
connector series.
1.50:1
1.40:1
1.30:1
1.20:1
1.10:1
SMP Shroud and Jack to Jack Adapter Assembly
0.0
8.0
16.0
24.0
32.0
40.0 GHz
Typical VSWR for SMP Jack to Jack Adapter
Part Numbers 1056700-1 and 1056721-1
GPO is a trademark of Corning Gilbert, Inc.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
152
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMP Microminiature Push-On Coaxial Connectors (Continued)
Specifications
General
Materials and Finishes
Housings and Center Contacts
Dielectric
Beryllium Copper per ASTM-B-196; gold plate over nickel plate
PTFE Fluorocarbon per ASTM-D-1457
Shrouds
Stainless steel per ASTM-A582 Type 303; passivate per ASTM-A380
Glass bead
Hermetic Seal
Electrical
Frequency Range
VSWR
dc - 40.0 GHz
1.10:1 Maximum dc - 23.0 GHz
1.15:1 Maximum 23.0 - 26.0 GHz
1.40:1 Maximum 26.0 - 40.0 GHz
335 Vrms maximum at sea level
0.10 f√ (GHz) maximum
Voltage Rating
Insertion Loss
Insulation Resistance
Dielectric Withstanding Voltage
RF High Potential
Impedance
5000 megohms minimum
500 volts (VRMS minimum)
325 volts (VRMS minimum) @ 5 MHz
50 ohms nominal
RF Leakage
-80dB to 3 GHz, -65dB from 3 to 26.5 dB minimum
Initial center contact 6.0 milliohms maximum
Outer contact 2.0 milliohms maximum
Contact Resistance
Mechanical
Durability
100 mating cycles minimum
±0.020 minimum
.000/.010
Radial Misalignment
Axial Misalignment
Force to Engage
full detent
15.0 lbs. maximum
10.0 lbs. maximum
2.0 lbs. maximum
5.0 lbs. minimum
2.0 lbs. minimum
0.5 lbs. minimum
half detent
smooth bore
full detent
Force to Disengage
half detent
smooth bore
Center Contact Retention
Environmental
Operating Temperature
Vibration
1.5 lbs. minimum axial force
-65°C to +165°C
per mil-std-202, method 204, test condition D
per mil-std-202, method 213, test condition I
per mil-std-202, method 107, test condition B
Shock
Thermal Shock
Moisture Resistance
per MIL-STD-202 method 106, except step 7b shall be omitted. Resistance shall be 200 megohms
within 5 minutes after removal from humidity.
Interface Dimensions
Jack
Shroud
3.40
[.132]
Full Detent
± .050
Min.
2.80
[.110
EMI Ring
± .002
]
± .076
± .003
3.70 Dia.
[.145] Max.
3.43 Dia.
[.135] Max.
8.60
[.142
Dia.
]
Anti-Rock Ring
2.8
[.112]
Min.
Bullet
Smooth Bore
± .050
3.43 Dia.
[.135] Max.
3.20
[.125
Dia.
± .002
]
Note: The U.S. Government (DESC) has determined that the above specified
interface dimensions are interchangeable and intermateble with Corning
Gilbert GPO Series RF Connectors.1
1 Per DESC drawing numbers 94007 and 94008, series SMP.
GPO is a trademark of Corning Gilbert, Inc.
153
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
www.tycoelectronics.com
C. America: 52-55-1106-0803
UK: 44-8706-080-208
RF Coax Connectors
SMP Microminiature Push-On Coaxial Connectors (Continued)
Straight Cable Jack, Solder
Attachment
6.40
[.250]
3.40 Dia.
[.135] Max.
3.40
[.133]
Dia.
EMI Ring
Anti-Rock Ring
Cable
Part No.
.047 Semi-Rigid
1056526-1
.085 Semi-Rigid
(RG 405)
1056527-1
5.80
[.230]
4.10
[.161]
Max.
Max.
Right-Angle Cable
Jack, Solder Attachment
Dim.B
Dim.A
EMI Ring
Anti-Rock Ring
3.40 Dia.
[.135] Max.
Cable
Dim. A
Dim. B
Part No.
4.8
5.8
.047 Semi-Rigid
1056553-1
1056554-1
.190
.230
.085 Semi-Rigid
(RG 405)
5.3
.209
6.7
.265
6.40 / 6.50
[.2525 / .2555]
Jack to Jack Adapter (Bullet)
3.40
[.133]
3.40 Dia.
[.135] Max.
Dia.
Part No.
1056700-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
154
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMP Microminiature Push-On Coaxial Connectors (Continued)
3.00
Shroud — Threaded
4.10 Dia.
[.120]
[.160] Max.
Description
Full Detent
Part No.
1056745-1
1056743-1
1056744-1
Limited Detent
Smooth Bore
3.00
[.120]
Dim.C
Shroud — 2 Hole Flange
Surface Mount
4.20
[.165]
Dim.B
Dim.A
Dim.D
2 Plcs.
1.10
[.045]
Description
Dim. A
Dim. B
Dim. C
Dim. D
Part No.
12.2
.480
8.3
.328
4.7
.187
2.5
.098
1056721-1
15.8
12.2
5.7
2.6
Full Detent
1056722-1
1056724-1
1056729-1
1056731-1
.625
.481
.223
.102
10.2
.400
7.2
.282
4.2
.165
1.9
.073
12.2
.480
8.3
.328
4.7
.187
2.5
.098
Limited Detent
10.2
.400
7.2
.282
4.2
.165
1.9
.073
Shroud — Press Fit
Dim.B
Dim.A
Description
Dim. A
Dim. B
Part No.
3.9
.154
2.0
.080
Limited Detent
1056736-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
155
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMP Microminiature Push-On Coaxial Connectors (Continued)
Shroud — Solder-In
Hermetic
3.60
[.140]
1.30
Description
Full Detent
Part No.
1056750-1
1056751-1
1056752-1
2.00
[.080]
[.050]
0.40
[.015]
Dia.
Limited Detent
Smooth Bore
3.70
[.145]
Dia.
2.50
[.098]
Dia.
2.50
[.099]
1.60
[.063]
Glass Bead Assembly
Part No.
1056728-1
.400
[.015]
Dia.
3.20
[.125]
4.60
[.182]
Plug, Straight, Full Detent
3.60
[.140]
0.30
[.010]
Ø 6.90
[.272]
3.80
[.150]
5.10
[.200]
Sq.
Sq.
OSMP Plug
Full Detent
Ø 0.40
[.015]
Ø 1.70
[.068]
4 Plcs.
Ø 0.80
[.030]
1.80
[.072]
4 Plcs.
Ref. Plane
9.10
[.358]
Plug, Right-Angle, Limited
Detent
4.70
2.20
[.186]
[.085]
± 0.10
± .002
0.60
[.024
Dia.
]
M/A-COM
Model Number
Part
No.
8.10
[.320]
2965-5006-62
1061692-1
± 0.10
0.50
[.020
Dia.
± .002
]
4.20
[.164]
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
156
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
OSP Miniature Modular Blind Mate Connectors
Product Facts
■ Interface designed for
multiple interconnects
■ For high performance
microwave system
requirements
■ Module to module, module
to motherboard, fixed and
float mount
■ Bulkhead or panel mount
■ For flexible and semi-rigid
cable
OSP miniature connectors
for semi-rigid cable meet
high performance require-
ments for microwave
Jack connectors are avail-
able in either float or rigid
high performance require-
ments for microwave sys-
mount. Rigid mount units will tem applications. The cable
function to specifications up
to .ꢀ1 ꢁ.1104 radial mis-
attachment is permanent
and highly reliable.
multiple interconnects.
Standard units are available alignment with the mating
Ease of assembly permits
users unskilled in soldering
techniques to rapidly pro-
duce cable assemblies with
consistently excellent
mechanical and electrical
performance.
in bulkhead or panel mount
designs for either direct
solder or solderless com-
pression crimp attachment.
Complete tooling for both
versions is located in the
Tooling Section of this
catalog.
plug connector. Applications
requiring greater than .ꢀ1
ꢁ.110 4 radial misalignment
can use either the float
design or floating connector
plates with guide pins.
The solderless compression
crimp attachment meets
157
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
specified. Values in brackets
are standard equivalents.
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
OSP Miniature Modular Blind Mate Connectors (Continued)
The specifications given
refer specifically to mated
pair of Part Numbers
ꢀ1590ꢀ1-ꢀ and ꢀ159012-ꢀ
(RG 012) and ꢀ1590ꢀ2-ꢀ
and ꢀ159010-ꢀ (RG 015).
Specifications on other con-
nectors are available on
request.
Engineering Data
Impedance —
Frequency —
Temperature Rating —
50 ohms
dc to 22.0 GHz
-65° to 125° C
Electrical
VSWR —
dc - 18.0 GHz
18.0 - 22.0 GHz
RF Transmission Loss —
Insulation Resistance —
Contact Resistance —
Center Contact
Outer Contact
Outer Contact to Cable
Dielectric Withstanding Voltage —
RG 402 (.141) Semi-Rigid
RG 405 (.085) Semi-Rigid
1.02 + .005f (GHz)
1.02 + .008f (GHz)
1.05 + .005f (GHz)
1.05 + .009f (GHz)
--
--
.03 x √f (GHz)
.03 x √f (GHz)
The general electrical,
5,000 megohms min.
5,000 megohms min.
mechanical and environ-
mental specifications in the
following table are recom-
mended for procurement
documents or drawings.
2.0 milliohms max.
2.0 milliohms max.
0.5 milliohms max.
2.0 milliohms max.
2.0 milliohms max.
0.5 milliohms max.
1500 volts RMS
1000 volts RMS
Corona Extinction Voltage at 70,000 Ft.— 375 volts min.
335 volts min.
RF High Potential at 5 MHz —
RF Leakage Interface Only —
Power Handling —
1,000 volts RMS
-(90-fGHz) dB min. (fully mated)
300W at 3 GHz (sea level) and room temperature
670 volts RMS
-(90-fGHz) dB min. (fully mated)
Environmental
Corrosion —
Vibration —
Shock —
Temperature Cycling —
Moisture Resistance —
Method 101, Condition B, MIL-STD-202
Method 204, Condition D, 20G’s, MIL-STD-202
Method 213, Condition I, 100G’s, MIL-STD-202
Method 107, Condition B, MIL-STD-202
Method 106, MIL-STD-202
Material
Housing —
Center Contact —
Dielectric —
Corrosion resistant steel Type 303 (stainless) per ASTM A484 and A582
Beryllium copper per ASTM-B-196
TFE fluorocarbon per ASTM-D-1457
MIL-P-25732
Gasket (O’Ring) —
Mechanical
Force to Engage —
Force to Disengage —
Center Contact Retention —
Durablilty —
3 pounds max.
1.5 pounds max.
6 pounds min.
5,000 Cycles
Radial Misalignment —
Rigid Mount
Float Mount
.10 ꢀ . 004ꢁ
.51 ꢀ .020ꢁ
Mating Characteristics
Jack Connector —
Center Contact Socket
Oversize test Pin —
Test Pin Finish —
.945 + .003 ꢀ.0372 + .0001ꢁ dia.
16 micro inch
Insertion Depth —
Number of Insertions —
.76/1.14 ꢀ.030/.045ꢁ
3
Insertion Force
Test Pin —
.940 + .003 ꢀ.0370 + .0001ꢁ dia.
16 micro inch
1.27/1.91 ꢀ.050/.075ꢁ
3 pounds max.
Test Pin Finish —
Insertion Depth —
Insertion Force —
Withdrawal Force
Test Pin —
.90 + .003 ꢀ.0355 - .0001ꢁ dia.
16 micro inch
1.27/1.91 ꢀ.050/.075ꢁ
1 ounce min.
Test Pin Finish —
Insertion Depth —
Withdrawal —
Finish
Center Contact —
Gold plate per MIL-G-45204, Type II, Class 1 over copper plate per MIL-C-14550
Housing —
Gold plate per MIL-G-45204, Typ II, Class 0 over nickel plate per QQ-N-290, Class 2
or passivate per ASTM-A380
All dimensions shown are nominal.
Contact the factory for specific
tolerances.
158
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
OSP Miniature Modular Blind Mate Connectors (Continued)
Interface Mating Dimensions
The connector interface,
specifically designed for
multiple interconnects, main-
tains reliable performance
over the typical mechanical
tolerance required in cost
effective packaging.
The interface test data
shows excellent perform-
ance is maintained with mat-
ing gaps up to 1.38 ꢁ.1ꢀ54.
Meets MIL-STD-308 Figure
32ꢀ. Intermateable to BMA
Connectors.
Jack
Plug
Letter
Dimensions
Letter
Dimensions
1.78
Nom.
.070
1.78
Nom.
.070
A
A
5.72
Min.
.225
5.33
Nom.
.210
B
C
D
E
F
B
C
D
E
F
7.62
Ref.
.300
7.62
Ref.
.300
5.00
5.05
Min.
.199
Nom.*
.197
5.08
Max.
.200
0.91
Nom.
.036
3.23
3.25
Min.
.128
Max.*
.127
*With spring bottomed
159
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
www.tycoelectronics.com
C. America: 52-55-1106-0803
UK: 44-8706-080-208
RF Coax Connectors
OSP Miniature Modular Blind Mate Connectors (Continued)
For Semi-Rigid Cable, Direct Solder Attachment
7.9
[.312]
Bulkhead Feedthrough
Cable Plug
Rear Mount
Hex.
A
Dia.
± 0.03
± .001
6.1
[.240
Dia.
]
+ 0.03
– .000
+ .001
– .000
6.1
Dia.
17.5
[.690]
[.242
]
9.19
[.362]
Max.
B
Dia.
Recommended
Mounting Hole
Dimensions
Cable
Plating
Part No.
A
B
RG 402/U
3.58
.141
3.7
.144
4.6
.180
Gold
1059402-1
RG 405/U
2.16
.085
2.3
.089
3.0
.120
Gold
1059404-1
6.4
A
Dia.
Bulkhead Feedthrough
Cable Jack Rigid
Rear Mount
Dia.
[.250]
11.1
[.437]
Hex.
+ 0.03
9.1
– .000
+ .001
– .000
Dia.
9.19
[.362]
B
Dia.
[.359
]
Max.
18.0
[.710]
Recommended
Mounting Hole
Dimensions
Cable
Plating
Part No.
A
B
RG 402/U
3.58
.141
3.7
.144
4.6
.180
Gold
1059410-1
RG 405/U
2.16
.085
2.3
.089
3.0
.120
Gold
1059412-1
+ 0.10
– 0.03
+ .004
– .001
2.6
+ 0.05
– 0.03
+ .002
– .001
Flange Mount Cable Jack
Floating Rear Mount
9.6
[.377
Dia.
2 Holes
]
Dia.
[.102
]
± 0.10
± .004
14.2
[.560
.
]
B Dia.
19.1
[.750]
14.2
[.560]
Dia.
OSP Jack
A
Dia.
7.1
[.280]
+ 0.25
9.5
– 0.00
18.0
[.710]
+ .010
– .000
[.375
]
Recommended
Mounting Hole
Dimensions
Cable
Part No.
A
B
RG 402/U
3.58
.141
3.7
.144
4.6
.180
1059453-1
RG 405/U
2.16
.085
2.3
.089
3.0
.120
1059456-1
Finish: Inner housing that is soldered to cable is gold plated. Outer housing is
passivated stainless steel.
When using semi-rigid cable, it is recommended that a service loop be used to
facilitate the float features of the connector.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
160
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
OSP Miniature Modular Blind Mate Connectors (Continued)
For Semi-Rigid Cable, Direct Solder Attachment (Continued)
A
Dia.
11.2 Dia.
Max.
Low Profile — Bulkhead
Feedthrough Cable Jack —
Floating Rear Mount
± 0.03
± .001
9.3
[.365
Dia.
[.440]
]
+ 0.05
– 0.03
+ .002
– .001
9.4
Dia.
16.2
[.640]
[.368
]
B
Dia.
Recommended
Mounting Hole
Dimensions
Cable
Plating
Part No.
A
B
RG 402/U
3.58
3.7
4.6
Gold
Gold
1059505-1
.144
.180
.141
RG 405/U
2.16
.085
2.3
.089
3.0
.120
1059506-1
When using semi-rigid cable, it is recommended that a service loop be used to
facilitate the float features of the connector.
7.6
[.300]
Low Profile — Panel
Feedthrough Cable Jack —
Floating Rear Mount
Dia.
A Dia.
B
Dia.
18.0
[.710]
Dimensions
Cable
Plating
Part No.
A
B
RG 402/U
3.58
.141
3.7
.144
4.6
.180
Gold
1059465-1
RG 405/U
2.16
.085
2.3
.089
3.0
.120
Gold
1059467-1
Recommended removal tool part number 1059774-1 is described in the
Tooling Section of this catalog.
When using semi-rigid cable, it is recommended that a service loop be used to
facilitate the float features of the connector.
Stand-Off C
Panel A ±.003
Panel B ±.003
Stand-Off Panel C +.050/–.000
Panel
B
Panel A
2.3
.090
9.5
.375
7.2
.285
+ 0.08
– 0.00
+ .003
– .000
8.6
+ 0.05
– 0.00
+ .002
– .000
8.0
2.3
.090
11.1
.438
5.6
.222
[.340
]
[.316
]
2.3
.090
12.7
.500
4.1
.160
3.2
.125
9.5
.375
6.4
.250
3.2
11.1
4.7
+ 0.00
– 0.13
+ .000
– .005
.125
.438
.187
1.3
3.2
.125
12.7
.500
3.2
.125
[.050
]
Panel
B
Recommended Mounting Detail
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
161
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
OSP Miniature Modular Blind Mate Connectors (Continued)
For Semi-Rigid Cable, Solderless Compression Crimp Attachment
7.9
[.312]
A
Dia.
Bulkhead Feedthrough
Cable Plug
Fixed Rear Mount
Hex.
± 0.03
6.1
Dia.
± .001
[.240
]
+ 0.03
– .000
+ .001
– .000
6.1
Dia.
]
9.19
[.362]
5.5
[.218]
[.242
B
Dia.
Max.
d
Recommended
Mounting Hole
Dim. B
Cable
Plating
Dim. A
Part No.
Before
Crimping
After
Crimping
RG 405/U
2.16
.085
Passivated
Stainless
Steel
2.2
.088
19.8
.782
17.2
.677
1059399-1
Outline drawing shows after crimp dimensions.
A
Dia.
6.4
[.250]
Bulkhead Feedthrough
Cable Jack
Fixed Rear Mount
Dia.
11.1
[.437]
Hex.
+ 0.03
9.1
5.5
[.218]
Dia.
– .000
Dia.
12.7
Max.
[.500]
+ .001
– .000
[.359
]
B
Recommended
Mounting Hole
Dim. B
Cable
Plating
Dim. A
Part No.
Before
Crimping
After
Crimping
RG 402/U
3.58
.141
Passivated
Stainless
Steel
3.6
.143
21.1
.830
18.2
.715
1059408-1
Outline drawing shows after crimp dimensions.
+ 0.05
9.6
2.6 Dia.
[.102] 2 Plcs.
Flange Mount Cable Jack
Floating Rear Mount
– 0.03
19.1
[.750]
9.5
Dia.
Dia.
+ .002
[.377
]
± 0.10
14.2
[.560
– .001
5.5
[.218]
9.5
Dia.
± .004
]
Dia.
[.372]
14.2
[.560]
A
Dia.
7.1
[.280]
9.7
B
[.380]
Recommended
Mounting Hole
Dim. B
Cable
Plating
Dim. A
Part No.
Before
Crimping
After
Crimping
RG 402/U
3.58
Passivated
Stainless
Steel
3.6
22.6
19.8
1059451-1
1059452-1
.143
.891
.780
.141
RG 405/U
2.16
.085
Passivated
Stainless
Steel
2.2
.088
22.6
.891
19.8
.780
Outline drawing shows after crimp dimensions.
When using semi-rigid cable, it is recommended that a service loop be used to facilitate the float features of the connector.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
162
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
OSP Miniature Modular Blind Mate Connectors (Continued)
For Flexible Cable, Crimp Attachment
± 0.03
6.9
[
Dia.
Bulkhead Feedthrough
Cable Plug
Rear Mount
± .001
[.240
]
+ 0.03
– .000
+ .001
– .000
6.1
11.4
[.447]
Dia.
[.242
]
21.2
[.833]
Ref.
H
Recommended
Mounting Hole
34.9
Max.
[1.375]
Cable
Plating
Passivated Stainless Steel
Part No.
1059523-1
RG 174/U, 179,
187, 188, 316
± 0.03
9.1
Dia.
Bulkhead Feedthrough
Cable Jack
Rigid Rear Mount
± .001
[.357
]
+ 0.03
9.1
– .000
+ .001
– .000
Dia.
6.4
[.359
]
[.250]
21.7
Ref.
[.855]
Recommended
Mounting Hole
35.6
Max.
[1.400]
Cable
Plating
Part No.
RG 55/U,
142, 223, 400
Passivated Stainless Steel
1059525-1
2.6 Dia.
[.102] 2 Plcs.
+ .051
9.6
Flange Mount Cable Jack
Floating Rear Mount
– .025
+ .002
– .001
Dia.
[.377
]
9.5
[.372]
Dia.
19.1
14.2
± .102
± .004
14.2
[.560
[.750]
[.560]
]
Dia.
7.1
[.280]
21.7
Ref.
9.5
[.375]
[.875]
Recommended
Mounting Hole
35.6
[1.400]
Max.
Cable
Plating
Part No.
RG 55/U,
Passivated Stainless Steel
Passivated Stainless Steel
Passivated Stainless Steel
1059540-1
142, 223, 400
RG 174/U, 179,
187, 188, 316
1059541-1
1058572-1
RG 178,
Double Braid
7.6
[.300]
Dia.
Low Profile — Panel
Feedthrough Cable Jack —
Rear Mount
+ 0.05
9.4
– 0.03
+ .002
– .001
Dia.
[.368
]
22.3
[.878]
Ref.
Recommended
Mounting Hole
35.6
[1.400]
Max.
Cable
Plating
Passivated Stainless Steel
Part No.
RG 174/U, 179,
187, 188, 316
1059551-1
Refer to Recommended Mounting Hole Detail for Semi-Rigid Cable Low
Profile Feedthrough Cable Jack.
Recommended removal tool part number 1059774-1 as described in the
Tooling Section of this catalog.
Note: Part Numbers are RoHS
compliant except:ꢀ Indicates
non-RoHS compliant.
163
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
specified. Values in brackets
are standard equivalents.
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
OSP Miniature Modular Blind Mate Connectors (Continued)
Panel Mount
Straight Terminal
2.6
[.102]
2 Plcs.
2-Hole Flange Mount Plug
Receptacle
Dia.
12.2
[.481]
6.4
[.250]
1.3
.050
Dia.
Dia.
Plating
Part No.
15.9
[.625]
Passivated
Stainless
Steel
1059566-1
4.1
[.162]
Dia.
1.7
[.065]
6.6
[.260]
9.9
[.390]
22.3
8.4
[.330]
[.878]
2-Hole Flange Mount Jack
Receptacle
2.6
[.102]
2 Plcs.
Dia.
15.9
[.625]
Plating
Part No.
1.3
[.050]
Dia.
Passivated
Stainless
Steel
1059596-1
12.2
[.481]
4.1
[.162]
Dia.
7.6
[.300]
27.4
[1.080]
2.6
[.102]
2 Plcs.
4-Hole Flange Mount Plug
Receptacle
Dia.
6.4
[.250]
1.3
[.050]
Dia.
Plating
Part No.
Dia.
Passivated
Stainless
Steel
1059563-1
4.1
[.162]
Dia.
8.6
[.340]
Typ.
22.3
[.878]
12.7
[.500]
Sq.
2.6
[.102]
2 Plcs.
4-Hole Flange Mount Jack
Receptacle
Dia.
1.3
[.050]
Plating
Part No.
Dia.
Passivated
Stainless
Steel
1059594-1
4.1
[.162]
Dia.
8.6
27.4
[1.080]
[.340]
Typ.
12.7
[.500]
Sq.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
164
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
OSP Miniature Modular Blind Mate Connectors (Continued)
Panel Mount (Continued)
Straight Terminal
Threaded Installation —
Panel Feedthrough Plug
Receptacle
± 0.03
1.7
1.6
[.064]
0.5
[.020]
Dia.
± 0.03
± .001
Dia.
5.5
[.218
Dia.
± .001
[.066
]
Dia.
]
Plating
Part No.
Passivated
Stainless
Steel
1059617-1
5.3
[.210]
10.4
[.410]
± 0.05
5.3
± .002
[.210
Dia.
6.4
[.250]
Panel
]
Recommended
Mounting Hole
Threaded Installation —
Panel Feedthrough Jack
Receptacle
± 0.03
1.7
1.6
[.064]
0.5
[.020]
Dia.
± 0.03
Dia.
5.5
Dia.
± .001
[.066
]
Dia.
± .001
[.218
]
Plating
Part No.
Passivated
Stainless
Steel
1059657-1
5.3
[.210]
10.4
[.410]
± 0.05
5.3
± .002
[.210
Dia.
6.4
[.250]
Panel
]
Recommended
Mounting Hole
Press Fit Installation —
Panel Feedthrough Plug
Receptacle
+ 0.05
6.4
– .000
+ .002
– .000
Dia.
± 0.03
1.2
± .001
[.046
[.253
]
Dia.
0.5
[.020]
7.92
[.312]
Dia.
]
Dia.
Plating
Part No.
Passivated
Stainless
Steel
1059651-1
+ .000
6.3
± 0.03
± .001
6.4
[.250
7.6
[.300]
Dia.
6.4
[.250]
– 0.05
+ .000
– .002
Dia.
Dia.
]
[.248
]
Recommended
Mounting Hole
Press Fit Installation —
Panel Feedthrough Jack
Receptacle
+ 0.05
– .000
+ .002
– .000
6.4
± 0.03
1.2
Dia.
Dia.
0.5
[.020]
Dia.
± .001
[.253
]
[.046
]
Plating
Part No.
Passivated
Stainless
Steel
1059654-1
+ .000
– 0.05
+ .000
± 0.03
± .001
6.3
6.4
[.250
7.6
[.300]
Dia.
6.4
[.250]
Dia.
Dia.
]
[.248
]
– .002
Recommended
Mounting Hole
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
165
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
OSP Miniature Modular Blind Mate Connectors (Continued)
Printed Circuit Board Mount
Straight Plug Receptacle —
Captured Contact
+ 0.08
1.7
Dia.
Hole Typ.
– .000
+ .003
– .000
[.067
]
1.0 Sq.
[.040] 4 Plcs.
Plating
Part No.
Gold
1059684-1
5.1
[.200]
Typ.
1.3
[.050]
5.1
[.200]
Typ.
Dia.
6.4
[.250]
Sq.
12.7
[.500]
Recommended
Mounting Hole
+ 0.08
1.7
Straight Jack Receptacle —
Captured Contact
Dia.
Hole Typ.
– .000
+ .003
– .000
[.067
]
1.0 Sq.
[.040] 4 Plcs.
1.3
[.050]
Dia.
Plating
Part No.
Gold
1059681-1
5.1
[.200]
Typ.
5.1
[.200]
Typ.
9.5
[.375]
Dia.
13.5
[.530]
Recommended
Mounting Hole
+ 0.08
1.7
Right-Angle Plug
Receptacle —
Captured Contact
Dia.
Hole Typ.
– .000
+ .003
[.067
]
13.5
[.530]
– .000
1.0 Sq.
[.040] 4 Plcs.
Plating
Part No.
Gold
1059691-1
15.0
[.590]
5.1
[.200]
Typ.
5.1
[.200]
Typ.
1.3
[.050]
Dia.
6.4
[.250]
Sq.
Recommended
Mounting Hole
Surface Mount
Vertical Plug with
Small Leg
+ 0.08
1.7
– .000
Dia.
9.4
[.372]
+ .003
[.067
]
1.6 Sq.
[.062] 4 Plcs.
– .000
+ 0.08
– .000
+ .003
– .000
2.5
Dia. Hole
Typ.
]
Plating
Part No.
[.098
Gold
1253111-1
4 Plcs.
4.5
[.178]
Typ.
1.3
[.050]
4.5
[.178]
Typ.
OSP
Plug
Dia.
6.4
[.250]
Sq.
O-Ring
Recommended
Mounting Hole
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
166
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
OSP Miniature Modular Blind Mate Connectors (Continued)
Hermetically Sealed
Metal-To-Metal
Rigid Gasket Seal —
Panel Feedthrough
Plug Receptacle
0.5
[.020]
Dia.
5.3
[.210]
Dia.
Rigid
Gasket
10.4
[.410]
1.6
[.064]
Dia.
VSWR
(GHz)
RF Leakage
(dB)
Plating
Passivated stainless steel
Part No.
1.04 + .009f
–(90-fGHz)
6059632-1
Installation Thermal Limit: 250°C.
Recommended Mounting Hole Detail A follows, pg 168.
0.5
[.020]
Rigid Gasket Seal —
Panel Feedthrough
Jack Receptacle
Dia.
5.3
[.210]
Dia.
Rigid
Gasket
1.6
[.064]
Dia.
11.2
[.450]
VSWR
(GHz)
RF Leakage
Plating
Passivated stainless steel
Part No.
(dB)
1.04 + .009f
–(90-fGHz)
6059665-1
Installation Thermal Limit: 250°C.
Recommended Mounting Hole Detail A follows, pg 168.
Field Replaceable
Solder and Braze-In
Panel Feedthrough Plug
Receptacle
+ 0.05
4.0
– 0.03
5.3
[.210]
Dia.
Dia.
+ .002
– .001
[.158
]
± 0.03
± .001
0.5
[.020
Dia.
]
± 0.13
± .005
5.6
[.220
9.9
[.390]
]
Glass Seal
VSWR
(GHz)
RF Leakage
(dB)
Plating
Passivated stainless steel
Part No.
1.06 + .01f
–(90-fGHz)
1059637-1
Recommended Mounting Detail B or E follows, pg 168.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
167
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
OSP Miniature Modular Blind Mate Connectors (Continued)
Hermetically Sealed (Continued)
Field Replaceable
Solder and Braze-In
(Continued)
+ 0.05
4.0
Panel Feedthrough Jack
Receptacle
– 0.03
Dia.
+ .002
[.158
]
– .001
± 0.03
± .001
0.5
[.020
Dia.
± 0.13
± .005
5.6
[.220
]
]
10.7
[.421]
Glass Seal
VSWR
(GHz)
RF Leakage
(dB)
Plating
Passivated stainless steel
Part No.
1.06 + .01f
–(90-fGHz)
1059671-1
Recommended Mounting Detail B or E follows at bottom of this page.
2.6
Dia.
2-Hole Flange Mount Plug
Receptacle With EMI/RFI
Gasket — 0.5 [.018] Dia.
Contact
[.102]
15.9
[.625]
2 Plcs.
+ 0.05
2.8
6.4
[.250]
– 0.03
+ .002
– .001
Dia.
Dia.
[.112
]
12.2
[.481]
± 0.13
± .005
8.0
[.315
]
± 0.03
± .001
0.5
[.018
9.5
[.375]
6.6
[.260]
]
Dia.
VSWR
RF Leakage
Plating
Passivated stainless steel
Part No.
(GHz)
(dB)
1.06 + .01f
–(90-fGHz)
1059572-1
Recommended Mounting Detail D follows at bottom of this page.
Recommended
Mounting Hole Detail
Detail A*
Detail B* (6.35 [.250] Panel Thickness)
± 0.03
5.5
± 0.03
± .001
1.7
[.066
+ .000
– 0.05
+ .000
– .002
± 0.03
± .001
5.5
[.218
4.1
± .001
[.218
]
Dia.
]
]
]
Dia.
[
.162
Dia.
Dia.
6.4
[.250]
Ref.
± 0.08
± .003
6.4
[.250
]
Ref. Panel
Panel
Detail D*
Detail E*
Detail C*
± 0.13
± .005
3.2
[.125
± 0.13
3.2
]
± .005
± 0.03
± .001
[.125
]
3.2
[.125
Panel
± 0.03
Panel
5.5
]
± .001
[.218
]
Dia.
+ .000
– 0.03
+ .000
– .001
12.2
[.481]
Ref.
4.1
12.2
[.481]
Ref.
Dia.
]
± 0.03
± .001
2.6
[.102
[
.162
± 0.03
± .001
2.9
[.115
± 0.08
± .003
7.6
[.300
]
]
]
Dia.
Dia.
Ref. Panel
*Consult appropriate Instruction Sheet for complete mounting details.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
168
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
OSSP Subminiature Modular Blind Mate Connectors
Product Facts
■ Subminiature version of
OSP Blind Mate Connectors
■ For space savings
■ Family of connectors and
adapters
OSSP connectors are a sub- used in applications where
.1ꢂ0 ꢁ .11254 radial mis-
alignment with the mating
plug connector.
Applications requiring
greater than .1ꢂ0 ꢁ .11254
radial misalignment can use
either the float design or
floating connector plates
with guide pins.
miniature version of the OSP
blind mate series.
space is at a premium.
A complete family of OSSP
connectors and adapters is
available including cable
connectors, fixed and float
mount panel connectors
and hermetic connectors.
Rigid mount units will func-
tion to specifications up to
Connectors in this series
incorporate the design ele-
ments of the OSP interface
including the float and mis-
mate features. OSSP blind
mates are about 01%
smaller than OSP connec-
tors and are designed to be
Engineering Data
Impedance —
Frequency —
Mechanical
50 ohms
dc to 28.0 GHz
-65° to 125° C
Force to Engage —
Force to Disengage —
Center Contact Retention —
Durablilty —
Radial Misalignment —
Rigid Mount
3 pounds max.
1.5 pounds max.
4 pounds min.
1,000 Cycles
Temperature Rating —
Electrical
VSWR —
RF Transmission Loss —
Insulation Resistance —
Contact Resistance —
Center Contact
Outer Contact
Outer Contact to Cable
Dielectric Withstanding Voltage —
Corona Extinction Voltage at 70,000 Ft.— 250 volts min.
RG 405 (.085) Semi-Rigid
1.05 + .01f (GHz)
.06 ꢀ .0025ꢁ
.51 ꢀ .020ꢁ
--
.040 x √f (GHz)
Float Mount
5,000 megohms min.
Mating Characteristics
Jack Connector —
Center Contact Socket Oversize test Pin —
Test Pin Finish —
6.0 milliohms max.
3.0 milliohms max.
0.5 milliohms max.
.533 + .003 ꢀ.0210 + .0001ꢁ dia.
16 micro inch max.
.76/1.14 ꢀ.030/.045ꢁ
Insertion Depth —
Number of Insertions — 3
Test Pin —
Test Pin Finish —
Insertion Force —
675 volts RMS
Insertion Force
.528 + .003 ꢀ.0208 + .0001ꢁ dia.
16 micro inch
3 pounds max.
.495 + .003 ꢀ.0195 - .0001ꢁ dia.
16 micro inch max.
1.27/1.91 ꢀ.050/.075ꢁ
1/2 ounce min.
RF High Potential at 5 MHz —
RF Leakage Interface Only —
Power Handling —
675 volts RMS
-(90-fGHz) dB min. (fully mated)
300W at 3 GHz (sea level) and room
temperature
Withdrawal Force
Test Pin —
Test Pin Finish —
Insertion Depth —
Withdrawal —
Environmental
Corrosion —
Vibration —
Shock —
Temperature Cycling —
Moisture Resistance —
Method 101, Condition B, MIL-STD-202
Method 204, Condition D, 20G’s, MIL-STD-202
Method 213, Condition I, 100G’s, MIL-STD-202
Method 107, Condition B, MIL-STD-202
Method 106, MIL-STD-202
Finish
Center Contact —
Gold plate per MIL-G-45204, Type II, Class 0 over nickel
plate per QQ-N-290, Class 2 or passivate per ASTM-A380
Gold plate per MIL-G-45204, Type II, Class 0 over nickel
plate per QQ-N-290, Class 2 or passivate per ASTM-A380
Housing —
Material
Housing —
Corrosion resistant steel Type 303 (stainless) per
ASTM A484 and A582
Center Contact —
Dielectric —
Gasket (O’Ring) —
Beryllium copper per ASTM-B-196
TFE fluorocarbon per ASTM-D-1457
MIL-P-25732
169
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
reference purposes only.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
Specifications subject
to change.
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
OSSP Subminiature Modular Blind Mate Connectors (Continued)
Interface Mating
Dimensions
The connector interface,
specifically designed for
multiple interconnects,
maintains reliable perform-
ance over the typical
mechanical tolerance
required in cost effective
packaging.
Jack
Plug
The interface test data
shows excellent perform-
ance is maintained with mat-
ing gaps up to .1ꢀ5 inch.
Dimensions
Description
A
B
C
D
E
F
1.22
0.48
3.91
.154
5.33
5.00
.197
3.35
.132
3.23
.127
Jack
Nom.
Min.
Ref.
Ref.
Nom.*
Min.
Max.
Max.*
Min.
.210
1.22
0.48
3.56
.140
5.33
.210
5.00
.199
0.51
.020
3.25
.128
Plug
Nom.
Nom.
Nom.
*With spring bottomed.
170
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
specified. Values in brackets
are standard equivalents.
www.tycoelectronics.com
C. America: 52-55-1106-0803
UK: 44-8706-080-208
RF Coax Connectors
OSSP Subminiature Modular Blind Mate Connectors (Continued)
For Semi-Rigid Cable, Direct Solder Attachment
Bulkhead Feedthrough
Cable Plug — Rear Mount
2.3
[.089]
± 0.03
4.6
Dia. Min.
Dia.
± .001
]
[.180
+ 0.03
– .000
+ .001
– .000
4.6
Dia.
]
3.0
Dia.
17.5
[.690]
7.3
[.289]
[
.182
[.120]
Max.
Recommended
Mounting Hole
Cable
Plating
Part No.
RG 405/U,
2.16
[.085]
Gold
1059857-1
2.4 Dia.
[.093] 2 Plcs.
Flange Mount Cable Jack —
Floating Rear Mount
+ 0.08
3.0
[.120]
14.7
[.580]
7.1
Dia.
– 0.00
± 0.10
± .004
Dia.
11.0
[.435
Dia.
+ .003
– .000
]
[.281
]
11.0
[.435]
5.5
[.217]
+ 0.00
– 0.05
+ .000
2.3
[.089]
Dia.
7.1
Dia.
18.0
[.710]
7.6
[.300]
[.280
]
– .002
Recommended
Mounting Hole
Cable
Part No.
RG 405/U,
2.16
[.085]
1059868-1
Finish: Inner housing that is soldered to cable is gold plated. Outer housing
is passivated stainless steel.
When using semi-rigid cable, it is recommended that a service loop be used
to facilitate the float features of the connector.
18.0
12.7
[.500]
Feedthrough Snap-In
Ref.
[.710]
14.7
[.570]
+ 0.08
– 0.00
+ .003
– .000
+ 0.05
– 0.00
+ .002
– .000
7.1
6.5
7.6 Dia.
[.300] Max.
Dia.
[.280
]
[.256
]
Cable
Part No.
1059874-1
RG 405/U,
2.16
[.085]
Compression
Spring
3.0
[.120]
Dia.
11.4
[.450]
6.1
[.240]
Dia.
Ref.
Connector
Retaining Clip
Recommended
Mounting Hole
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
171
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
OSSP Subminiature Modular Blind Mate Connectors (Continued)
For Flexible Cable, Crimp Attachment
Bulkhead Feedthrough
Cable Plug — Rear Mount
± 0.03
4.6
4
Dia.
± .001
[.180
]
+ 0.03
– .000
+ .001
– .000
4.6
Dia.
]
33.0
[1.298]
[.182
Ref.
Recommended
Mounting Hole
Cable
Plating
Part No.
RG 188/U,
316 Double
Braided Only
Passivated Stainless Steel
Passivated Stainless Steel
1059884-1
1059886-1
RG 174/U,
188/U, 316U
Flange Mount
2.4 Dia.
+ 0.08
– 0.00
+ .003
– .000
14.7
[.093] 2 Plcs.
Dia.
7.1
[.281
Cable Jack —
Dia.
± 0.10
± .004
11.0
[.435
[.580]
]
Floating Rear Mount
]
11.0
[.435]
+ 0.00
– 0.05
+ .000
– .002
7.1
[.280
5.5
[.217]
Dia.
35.6
[1.40]
Max.
]
7.6
[.300]
Recommended
Mounting Hole
Cable
Plating
Part No.
RG 188/U,
316 Double
Braided Only
Passivated Stainless Steel
1059888-1
RG 174/U,
188/U, 316U
Passivated Stainless Steel
1059887-1
35.6
[1.400]
+ 0.08
Feedthrough Snap-In
Cable Jack
Max.
7.1
– 0.00
+ .003
– .000
Dia.
+ 0.05
– 0.00
+ .002
– .000
6.5
[.280
]
± 0.38
Dia.
22.4
[.880
Mounting Hole
[.256
]
6.1
[.240]
± .015
]
Dia.
Mounting Hole
Part No.
1059889-1
OSSP
Jack
Connector
Retaining Clip
Compression
Spring
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
172
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
OSSP Subminiature Modular Blind Mate Connectors (Continued)
For Panel Mount
Threaded Panel
Feedthrough Plug
Receptacle, Straight
Terminal
± 0.03
4.1
4.0
[.156]
Dia.
Dia.
± .001
[.162
]
0.4
[.015]
± 0.03
± .001
Dia.
1.3
[.051
Dia.
]
Plating
Part No.
Passivated
Stainless
Steel
± 0.05
11.4
[.450]
5.3
1059903-1
6.4
[.250]
1.2
[.049]
± .002
[.210
]
Dia.
Recommended
Mounting Hole
+ 0.08
+ 0.05
6.4
[.250]
Press-Fit Panel
Feedthrough Plug
Receptacle
Ø 4.0
11.4
– 0.00
+ .003
– .000
– 0.00
+ .002
– .000
± 0.05
± .002
5.3
[.210
[.159
]
[.450
]
]
5.1
[.200]
Straight Knurl
Part No.
1059901-1
± 0.03
± .001
Ø 4.0
[.156
]
OSSP
Plug
± 0.03
± .001
Ø 0.9
± 0.03
Ø 0.4
[.034
]
O-Ring
+ 0.00
± .001
[.015
]
Ø 3.9
– 0.05
+ .000
– .002
Recommended
Mounting Hole
[.154
]
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
173
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
OSSP Subminiature Modular Blind Mate Connectors (Continued)
For Printed Circuit Board Mount
6.4
[.250]
Sq.
Straight Plug Receptacle —
Captured Contact
Mounting
Surface
12.6
[.498]
5.1
[.200]
5.1
[.200]
8.7
Typ.
[.343]
+ 0.08
– 0.00
+ .003
– .000
Ø 1.7
Hole
Typ.
5.1
[.200]
[.067
]
OSSP
Plug
5 Plcs.
Ø 0.9
[.034]
O-Ring
1.0 Sq.
[.040] Typ.
4 Plcs.
Recommended
Mounting Hole
Part No.
1059919-1
6.35
[.250]
Sq.
5.84
[.230]
Right-Angle
Plug Receptacle
5.08
± 0.51
5.08
[.200
[.200]
Typ.
± .020
]
5.08
[.200]
Typ.
+ 0.08
– 0.00
+ .003
– .000
Ø 1.7
[.067
Hole
Typ.
5.08
[.200]
]
± 0.25
17.78
[.700
5 Plcs.
Ø 0.86
[.034]
± .010
]
Recommended
Mounting Hole
14.61
[.575]
1.02
[.040]
Sq.
4 Plcs.
O-Ring
± 0.03
5.11
[.201
± .001
]
Part Number
1484546-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
174
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
OSSP Subminiature Modular Blind Mate Connectors (Continued)
Hermetically Sealed
Metal to Metal
3.0
[.118]
1.0
[.039]
Dia.
Formable Gasket —
Panel Feedthrough Plug
Receptacle
Dia.
3.6
[.140]
Dia.
12.1
[.475]
.03
[.012]
Dia.
VSWR
(GHz)
RF Leakage
(dB)
Plating
Part No.
1.06 + .01f
–(85-fGHz)
Gold
1059905-1
Recommended Mounting Hole Detail A at bottom of this page.
+ 0.00
4.8
5.3
[.210]
– 0.05
+ .000
– .002
Dia.
Dia.
Solder and Braze-In
[.189
]
Panel Feedthrough Plug
Receptacle
8.2
[.322]
Ref.
± 0.03
0.5
Dia.
± .001
[.020
]
VSWR
(GHz)
RF Leakage
(dB)
Plating
Part No.
1.06 + .01f
–(85-fGHz)
Gold
1059902-1
Recommended Mounting Hole Detail B at bottom of this page.
Field Replaceable
Solder and Braze-In
2.4 Dia.
[.093] 2 Plcs.
2-Hole Flange Mount
Plug Receptacle With
EMI/RFI Gasket
12.2
[.480]
+ 0.05
– 0.03
+ .002
– .001
1.9
Dia.
Dia.
5.3
[.210]
Dia.
[.076
]
9.0
[.353]
9.5
[.375]
± 0.03
± .001
± 0.13
0.3
[.012
8.2
5.7
[.223]
± .005
]
[.322
]
Dia.
VSWR
(GHz)
RF Leakage
(dB)
Plating
Part No.
1.06 + .01f
–(85-fGHz)
Passivated Stainless Steel 1059894-1
Recommended Mounting Hole Detail C at bottom of this page.
Recommended
Mounting Hole Detail for
Hermetically Sealed
Detail A*
Detail B*
Detail C*
2.5
[.100]
+ 0.08
± 0.13
± .005
3.2
[.125
0.8
– 0.00
+ .000
– 0.03
+ .000
– .001
+ .003
1.0
]
+ .003
– .000
4.1
[.031
]
– 0.05
Dia.
Dia.
Panel
]
+ .001
– .002
[.041
]
[.162
R 0.08
[.003]
Max.
+ 0.05
– 0.03
+ .002
– .001
Ø 5.5
[.218
9.0
[.353]
Ref.
+ 0.08
– 0.03
+ .003
– .001
R 0.13
]
± 0.03
± .001
2.0
[.078
± 0.03
± .001
3.2
[.121
[.005
]
]
6.4
[.250]
Ref.
]
Dia.
Dia.
+ 0.03
Ø 4.8
– 0.00
+ .001
– .000
Note: Part Numbers are RoHS
compliant except:ꢀ Indicates
non-RoHS compliant.
[.190
]
*Consult appropriate Instruction Sheet for complete mounting procedure.
175
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors
SMB Connectors are avail-
able in commercial and
high rel versions. They are
ideally suited for circuit
miniaturization and are
offered in a wide range of
configurations including
plugs, right-angle plugs,
jacks, bulkhead jacks and
adapters, as well as printed
circuit board and solder
jacks.
Product Facts
■ SMB offers snap-fit coupling
for quick connect/disconnect
■ Choice of Commercial or
High Rel Connectors
■ 50 and 75 Ω MIL-Type
connectors available
■ Straight plugs and jacks are
completely crimp terminated
■ Fast easy cable assembly
■ Low VSWR
Termination costs are kept
to a minimum using plugs
and jacks with a crimp cen-
ter contact and hex crimp
outer braid. Both hand held
tooling and pneumatic
bench-mounted tooling is
available. Easily assembled
right-angle plugs have a
hex crimp on the outer
■ Standard military, commer-
cial or Tyco Electronics
tooling
■ Listed under the Component
Program of Underwriters
Laboratories Inc.,
R
File No. E81956
■ PC Board soldered connec-
tors are recognized under
the Component Program of
braid ferrule and bifurcated
solder center contacts.
Underwriters
Tyco Electronics’ 75 Ohm BT
43 SMB Connectors feature
unique spring mating with
snap-fit couplings for quick
connect/disconnect. These
connectors are designed
to be intermateable with
75 Ohm SMB MIL-C-39012
connectors. They also fea-
ture reliable dual crimp
R
Laboratories Inc.,
File No. E81956
■ Certified by Canadian
Standards
Association
R
File No. LR 7189
cable terminations.
Packaging —All connectors are
packaged individually unless otherwise
noted under the “Military No. and/or
Comments” column in the connector
specifications chart.
Between Series Adapters
For SMB Between Series Adapters,
please see pages 251-260.
176
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMB Connector Specifications
Electrical Characteristics
Environmental Characteristics
Impedance — 50 ohms and 75 ohms, nominal
Frequency Range — 0 to 4.0 GHz
Voltage Rating (VRMS) —
50 ohm connectors for RG 178/U series cable
50 ohm connectors for RG 316/U series cable
75 ohm connectors for RG 179/U series cable
75 ohm connectors for RG 195/U series cable
Temperature Rating — –65°C to +165°C
Corrosion (salt spray) — MIL-STD-202, Method 101, test condition B, 5% salt
solution
Vibration High Frequency — MIL-STD-202, Method 204, test condition B
(15 G’s)
Shock — MIL-STD-202, Method 213, test condition B, 75 G’s at 6 milliseconds, 1⁄2
sine
Sea Level
70,000 Feet
300
400
300
500
75
100
75
125
Insulations Resistance — 1000 megohms min.
Contact Resistance — (milliohms max.)
Thermal Shock — MIL-STD-202, Method 107, test condition B, except high tem-
perature shall be +85°C. High temperature shall be +200°C for connectors using
200°C cables.
After
Environment
Initial
Moisture Resistance — MIL-STD-202, Method 106, when interface gasket is
used. No measurements of high humidity. Insulation resistance shall be 200
megohms minimum within five minutes after removal from humidity.
Center contact
Outer contact
Braid to body
6.0
1.0
1.0
8.0
1.5
N/A
Durability Test — Conducted per MIL-C-39012 Reg. Para. 3.15, Method Para. 4.6.12
Contact Current Rating — 1.5 amps DC max.
Voltage Standing Wave Ratio (VSWR0 —
to 4.0 GHz or 80% of upper cutoff frequency of the cable, whichever is lower.
Materials
Body, Body Components and Male Contacts — Brass, half hard, per QQ-B-626,
Alloy 360, Zinc per QQ-Z-363
Mating Engagement
Cable
Female Contacts — Beryllium copper per QQ-C-530, heat treated per MIL-H-7199
Insulators — TFE fluorocarbon per ASTM D 1710, Type 1, Grade 1
Lockwashers — Phosphor bronze per QQ-B-750
Straight
1.30 + .04F
1.25 + .04F
Right-Angle
RG 178/U Series
RG 316/U Series
1.45 + .06F
1.35 + .04F
Crimp Ferrule — Annealed copper alloy per WW-T-799
Gaskets — Silicone rubber per ZZ-R-765, Class 11B, Grade 65-75
F=GHz, does not apply to 75 ohm connectors.
RF High Potential Withstanding Voltage
Frequency — 5 MHZ
Leakage Current — N/A
50 ohm connectors for RG 178/U series cable
50 ohm connectors for RG 316/U series cable
75 ohm connectors for RG 179/U series cable
75 ohm connectors for RG 195/U series cable
Plating
Center Contacts — 0.00127 ꢀ.000050ꢁ min. Gold per MIL-G-452048 Type 1,
Grade C, Class 1, over 0.00254 ꢀ.000100ꢁ min. nickel per QQ-N-290
Other Metal Parts — Gold, Nickel or Solder plated to meet the Finish and
Corrosion requirements of MIL-C-39012
675 VRMS
950 VRMS
950 VRMS
1225 VRMS
RF Leakage — –55 dB min. at 2-3 GHz
Insertion Loss — .30dB max. at 3 GHz
Mechanical Characteristics
Engagement Forces — 14 lbs. ꢀ62.3 Nꢁ maximum engagement initially.
After 500 matings, 14 lbs. ꢀ62.3 Nꢁ maximum engagement and 2 lbs. ꢀ8.8 Nꢁ minimum
disengagement for all of SMBs.
Cable Attachment —
Straight Connectors — Crimp, both center contact and braid
Right-Angle Connectors — Crimp on braid and bifurcated solder center contact
Durability — 500 cycles per MIL-C-39012
Contact Captivation — When captivated, the contacts will withstand 4.0 lbs.
minimum axial force.
Cable Retention — When properly assembled to the compatible braided coaxial
cable, the retention is equal to the breaking strength of the cable.
Marking — Per MIL-STD-130
177
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, 50 Ohm
Straight Plugs
6.35
[.250]
Max.
21.10
[.830]
Max.
Center
Outer
Contact
Plating
Other
Metal Parts
Plating
RG/U
Cable
Part
No.
Contact
Dielectric
Style
Plating
178, 178A, 178B,
196, 196A
Gold
Gold
Nickel
TEFLON
MIL Type
413985-6
Gold
Gold
Gold
Gold
Gold
Nickel
Nickel
Nickel
Nickel
Nickel
Nickel
Nickel
Gold
TEFLON
TEFLON
TEFLON
TEFLON
TEFLON
TEFLON
TEFLON
TEFLON
TEFLON
TEFLON
TEFLON
TEFLON
MIL Type
MIL Type
MIL Type
Die Cast
Die Cast
MIL Type
Die Cast
Die Cast
MIL Type
MIL Type
Die Cast
MIL Type
413985-1
413985-3
413985-7
414946-1
5414946-2
1-413985-1
5414946-5
5414946-6
413985-2
413985-4
5414946-3
413985-8
174, 316,
Gold
Nickel
Gold
188, 188A
Gold
Gold
Nickel
Gold
Gold
179, 179A, 179B,
161, 187, 187A,
BELDEN 9221
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Nickel
Gold
Gold
Nickel
Nickel
Nickel
RG 316,
188 Double Braid
Gold
Nickel
MIL Type
Die Cast
Right-Angle Plugs
13.71
[.540]
Max.
13.71
[.540]
Max.
6.35
[.250]
Dia.
13.21
[.520]
Max.
6.35
[.250]
Dia.
13.21
[.520]
Max.
Center
Contact
Plating
Outer
Contact
Plating
Other
Metal Parts
Plating
RG/U
Cable
Part
No.
Dielectric
Style
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Nickel
Gold
Nickel
Gold
Gold
Gold
Gold
Nickel
Nickel
Gold
TEFLON
TEFLON
TEFLON
TEFLON
TEFLON
TEFLON
TEFLON
TEFLON
TEFLON
TEFLON
TEFLON
MIL Type
MIL Type
Die Cast
MIL Type
MIL Type
MIL Type
Die Cast
Die Cast
MIL Type
MIL Type
Die Cast
414002-7
414002-8
5414363-8
414002-1
414002-3
414002-5
5414363-3
5414363-5
414002-2
414002-4
5414363-4
178, 178A, 178B,
196, 196A
Nickel
Nickel
Nickel
Nickel
Gold
174, 316, 188, 188A
179, 179A, 179B
161, 187, 187A
BELDEN 9221
RG 316,
188 Double Braid
Nickel
Nickel
BELDEN is a trademark of Belden Wire
and Cable Company.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
178
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, 50 Ohm (Continued)
Commercial Jack
MIL Type Jack
Straight Jacks
5.56
[.219]
Hex.
25.40
[1.000]
Die Cast
Brass
Center
Contact
Plating
RG/U
Cable
Body
Plating
Jack
Part No.
Dielectric
Style
178, 178A, 178B, 196, 196A
Gold
Gold
Gold
Gold
Nickel
Nickel
Nickel
Nickel
TEFLON
TEFLON
TEFLON
TEFLON
MIL Type
MIL Type
Die Cast
5414170-2
5414170-1
414948-1
414948-3
174, 316,
188, 188A
RD 316, 188 Double Braid
Commercial
Bulkhead Jacks
6.35
[.250 ]
Hex.
5/4.88
[.197/.192]
Dia.
28.60
[1.120]
Center
Contact
Plating
Bulkhead
Jack.
Part No.
RG/U
Cable
Body
Plating
Dielectric
Style
Gold
Gold
Gold
Nickel
Nickel
Nickel
TEFLON
TEFLON
TEFLON
Commercial
Commercial
Commercial
5415006-1
5228217-1
5415006-2
174, 316,
188,188A
2.08/2.01
[.082/.079]
RD 316, 188 Double Braid
Maximum Panel Thickness 2.36 [.093]
Recommended Panel Cutout
for Bulkhead Jack and Adapter
Bulkhead Jack
Adapter
(Jack-Jack)
6.35
Hex.
[.250]
17.53
[.690]
Max.
Center
Contact
Plating
Body
Plating
Type
Dielectric
Style
Part No.
Gold
Gold
Nickel
Gold
TEFLON
TEFLON
MIL Type
MIL Type
228553-1
228553-2
Jack-To-Jack
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
179
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, 50 Ohm (Continued)
PC Board
Vertical Jacks
5.08
[.200]
Ø 1.60
[.063]
4 Plcs.
2.54
[.100]
A
5.08
[.200]
Ø 1.19
[.047]
B
Recommended
PC Board Layout
Jacks
Center
Contact
Plating
Body
Plating
Dim.
A
Dim.
B
Part
No.
Type
Dielectric
Style
7.62
3.94
––
––
––
––
Gold
Gold
Gold
Gold
Gold
Nickel
Nickel
Tin
TEFLON
TEFLON
MIL Type
MIL Type
MIL Type
413990-1
413990-2
414612-2
5221111-1
.300
.155
7.62
.300
10.16
.400
3.94
.155
3.94
.155
2.54
.100
8.25
.325
TEFLON
Brass,
Stamped
Max. TEFLON
PC Board
Vertical Plugs
± 0.20
11.53
[.454
± .008
]
6.35
[.250]
Sq.
± 0.13
6.32
[.249]
3.94
[.155
± .005
]
± 0.05
5.08
[.200
Ø 1.60
[.063]
2.54
[.100]
4 Plcs.
0.64
[.025]
± .002
]
A
B
± 0.05
± .002
1.02
[.040
Typ.
Ø 6.35
[.250]
5.08
[.200]
]
Ø 1.19
[.047]
± 0.03
± .001
Ø 0.97
[.038
]
Recommended
PC Board Layout
1.42
[.056]
Typ.
Plugs
Center
Contact
Plating
Recommended
PC Board
Layout
Body
Plating
Dim.
A
Dim.
B
Part
No.
Type
Dielectric
Style
Low Profile (Plug)
Mated Pair
3.94
.155
7.62
300
Gold
Nickel
TEFLON
B
MIL Type 415774-1
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
180
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, 50 Ohm (Continued)
PC Board,
Right-Angle Jacks
Jack Low Profile
Jack with Standoff Pads
Bulkhead Jack
12.70
[.500]
13.46
[.530]
19.87
[.782]
A
A
B
A
B
B
Jacks
Center
Contact
Plating
Interface
Body
Plating
PCB
Leg
Plating
Recommended
PC Board
Layout
Dim.
A
Dim.
B
Part
No.
Type
Dielectric
Style
7.11
3.94
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Nickel
Gold
Gold
Nickel
Gold
TEFLON
TEFLON
TEFLON
TEFLON
TEFLON
TEFLON
TEFLON
TEFLON
TEFLON
TEFLON
Polypropylene
TEFLON
MIL Type
MIL Type
Die Cast
Die Cast
MIL Type
MIL Type
Die Cast
Die Cast
Die Cast
Die Cast
A
A
A
A
A
A
A
B
A
A
C
A
413996-2
413996-4
415340-1
415672-1
414026-2
414026-3
5414337-1
5415379-1*
415381-1ꢀ
414963-1
5228435-1
1274330-1
.280
.155
7.11
.280
7.11
.280
8.76
.345
8.51
.335
8.76
.345
8.76
.345
8.76
.345
8.51
.335
3.94
.155
2.79
.110
2.79
.110
3.94
.155
3.94
.155
3.94
.155
2.79
.110
3.94
.155
Low Profile
Gold
Gold
Gold
Gold
Nickel
Nickel
Nickel
Nickel
Gold
Nickel
Tin-Lead
Nickel
Nickel
Gold
With
Standoff Pads
7.67
.302
9.78
.385
7.67
.302
2.79
.110
3.94
.155
2.79
.110
Bulkhead
Commercial
Bulkhead
Brass,
Stamped
Nickel
Gold
Tin
Gold
Die Cast
* 5 leg design
5.08
PC Board,
Right-Angle Plug
[.200]
5.08
[.200]
5.08
[.200]
Ø 1.75
[.069]
4 Plcs.
2.54
[.100]
2.54
[.100]
Ø 1.32
[.052]
2.54
[.100]
1.75 Dia.
[.069] Min.
(4 Holes)
5 Plcs.
13.46
[.530]
A
B
5.08
[.200]
5.08
[.200]
5.08
[.200]
1.24 Dia.
[.049] Min.
± 0.05
Ø 1.24
± .002
[.049
]
A
B
C
6.35
[.250]
Dia.
Recommended
PC Board Layouts
Plugs
Center
Contact
Plating
Interface
PCB
Leg
Plating
Recommended
PC Board
Dim.
A
Dim.
B
Part
No.
Body
Dielectric
Style
Plating
Layout
8.76
2.79
Gold
Gold
Nickel
Nickel
Tin
TEFLON
TEFLON
Die Cast
Die Cast
B
A
415380-1*
5414338-1
.345
.110
8.76
.345
3.94
.155
Nickel
* 5 leg design
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
181
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, 50 Ohm (Continued)
Bulkhead PC Board Jack,
Solder Receptacle Kits
5/4.88
[.197/.192]
Dia.
6.35
Hex.
[.250]
3.71
[.146]
2.08/2.01
[.082/.079]
16.0
Max.
[.630]
Maximum Panel Thickness 2.36 [.093]
Recommended Panel Cutout
Kit Includes Lockwasher
and Jam Nut
Center
Body
Kit
Part
No.
Type
Contact
Plating
Dielectric
Style
Plating
Front Mount
Rear Mount
Gold
Gold
Nickel
Nickel
TEFLON
TEFLON
MIL Type
MIL Type
228216-1*
228215-1*
Lockwasher and Jam Nut
*includes Jam Nut and Lockwasher
Part No.
415001-2
Part No.
414969-2
SMB Receptacle Jack
4.45
[.175]
6.99
[.275]
1.02
[.040]
2.92
[.115]
3.18
[.125]
3.45
[.136]
3.68
[.145]
Ref. Plane
Hex
Dia.
6.35
[.250]
± 0.13
0.97
[.038
Dia.
± .001
]
10-32 UNEF-2A
Center
Contact
Plating
Body
Plating
Type
Dielectric
Style
Part No.
Front Mount
Gold
Nickel
TEFLON
MIL Type
414895-1
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
182
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, Mini 75 Ohm
Mini 75 ohm SMB connec-
tors are ideally suited for
circuit miniaturization in
communication, broadband
and switching equipment
as well as a variety of other
applications.
Product Facts
■ Industry standard for minia-
ture 75 ohm SMB
■ SMB offers snap-fit
coupling for quick
connect/disconnect
■ Suitable for high density
They offer the same low
consistent mating/unmating
force as Tyco Electronics
standard SMB products and
therefore, outer contact
resistance values are main-
tained from connector to
connector.
applications
■ Fast easy cable assembly
■ Low VSWR
■ Connectors offer consistent
mating and unmating forces
■ Straight plugs and jacks are
completely crimp termi-
nated
Standard military, commer-
cial or Tyco Electronics tool-
ing can be used to
■ Low cost
terminate these products.
Electrical Characteristics
Impedance — 75 ohms
Frequency Range — 0 to 4.0 GHz
Insulation Resistance — 1000 megohms
Contact Current Rating — 1.5 amps DC max.
Cost effective assembly of
the straight plugs is com-
pleted with a crimp center
contact and hex crimp on
the outer braid. Right-angle
plugs have a hex crimp on
the outer braid ferrule and
bifurcated solder center
contacts.
Mechanical Characteristics
Engagement Forces — Initial—14.0 lbs. ꢀ62.3 Nꢁ maximum engagement.
After 500 matings, 14.0 lbs. ꢀ62.3 Nꢁ maximum engagement.
Durability—500 cycles
Environmental Characteristics
Temperature Rating — -65°C to +165°C
183
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, Mini 75 Ohm (Continued)
Straight Plug
Ø 1.73
[.068]
Ø 6.35
[.250]
Ø 2.64
[.104]
17.78
Ref.
[.700]
Center Contact
Plating
Outer Contact
Body
RG Cable
Part No.
Plating
Plating
Nickel
Nickel
Nickel
179, 187
179, 187
RD 179
Gold
Gold
Gold
Gold
5415487-1
5415487-2
5415487-3
Nickel
Nickel
Right-Angle Plug
13.7
[.539]
Max.
10.21
[.402]
Ref.
Ø 6.35
[.250]
± 0.25
± .010
16.0
[.630]
9.78
[.385
Ref.
]
Center Contact
Plating
Outer Contact
Plating
Body
Plating
RG Cable
Part No.
179, 187
179, 187
RD 179
Gold
Gold
Gold
Nickel
Gold
Gold
Nickel
Nickel
Nickel
5415484-1
5415484-2
5415484-3
Bulkhead Jack
22.86
Max.
[.900]
± 0.05
Ø 3.66
[.144
± .002
]
Ø 5.03
[.198]
4.52
[.178]
Recommended
PC Board Layout
9.7
[0.38]
10.92
[.430]
6.35
Hex.
[.250]
Center Contact
Plating
Body
Plating
RG Cable
Part No.
179, 187
Gold
Nickel
415500-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
184
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, Mini 75 Ohm (Continued)
± 0.08
± .003
]
5.08
[.200
± 0.18
Vertical PC Board Jacks
7.62
[.300
± 0.08
± .003
2.54
[.100
± .007
]
]
± 0.08
± .003
Ø 0.71
[.028
± 0.08
± .003
]
5.08
[.200
Ø 3.67
[.145]
Max.
]
± 0.08
Ø 1.32
[.052
± .003
]
4 Plcs.
Recommended
PC Board Layout
Leg
Length
Center Contact
Plating
Body
Plating
Part No.
2.11
Gold
Gold
Gold
Gold Flash
415504-2
.083
3.05
.120
Gold
415504-3
3.05
.120
Gold Flash
415504-4
3.18
[.125]
5.54
[.218]
Right-Angle PC Board
Jacks
± 0.08
5.08
[.200
± .003
± 0.08
]
2.54
[.100
± .003
]
± 0.25
7.95
± 0.08
Ø 0.71
[.028
± .010
[.313
]
± .003
± 0.08
]
5.08
14.1
[.555]
± .003
[.200
]
± 0.08
± .003
Ø 1.32
[.052
]
4 Plcs.
Recommended
PC Board Layout
Ø 3.71
[.146]
Max.
Leg
Center Contact
Plating
Body
Part No.
415490-1
415490-2
415490-3
415490-4
Length
Plating
2.79
.110
Gold
Gold
Gold
Gold
Gold
Nickel
Gold
2.79
.110
2.11
.083
2.11
.083
Nickel
4.50
[.177]
2.79
[.110]
Right-Angle PC Board
Bulkhead Jacks
± 0.08
5.08
[.200
± 0.08
± .003
2.54
[.100
]
± .003
]
± 0.08
Ø 0.71
[.028
± 0.08
± .003
5.08
[.200
19.94
[.785]
]
± .003
]
2.36
[.093]
Panel
± 0.08
± .003
Max.
Ø 1.32
[.052
11.18
[.440]
]
4 Plcs.
Thickness
Recommended
PC Board Layout
Ø 3.71
Max.
[.146]
Leg
Center Contact
Body
Part No.
415377-1
415377-2
415377-5*
Length
Plating
Plating
2.79
.110
Gold
Nickel
Gold
Gold
2.79
.110
Gold
Gold
2.79
.110
Note: Part Numbers are RoHS
compliant except:ꢀ Indicates
non-RoHS compliant.
*Isolated.
185
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, 75 Ohm BT 43 (SMZ)
Product Facts
■ Widely used in data
transmission and telecom-
munication applications
■ BT 43 connector developed
from the SMB range and
feature snap-on and
latching variant
■ Most BT 43 connectors are
available as fully crimped
connectors.
■ BT 43 and 75 Ω connectors
available in solder and
crimp versions
Female center contacts —
The Tyco Electronics range
of 75 ohm SMB (SMZ)
connectors are designed
to meet the increasing
demands of the
Specifications
Max working voltage (dc) — 500 V
Max proof voltage (dc) — 1.5 kV
Contact resistance (inner) —
5 milliohm
Contact resistance (outer) —
1 milliohm
Copper Alloy
Male center contacts —
Copper Alloy
Outer contacts — BeCu
Plating —
Contacts and critical surfaces — Gold
Other parts — Nickel
Insulators — P.T.F.E.
Telecommunications
market, and are designed
in accordance with
Bodies and other parts — Brass
BS9210 F0022.
186
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
specified. Values in brackets
are standard equivalents.
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, 75 Ohm BT 43 (SMZ) (Continued)
30.5
Straight Plugs, Snap-On
Assembled
[1.20]
28.0
[1.10]
20.4
8.8
[0.35]
[0.80]
Dia.
Termination Method
Cable Type
Body Plating
Part No.
Inner
Outer
Crimp
Crimp
RG 179B/U
BT2002
Crimp
Crimp
Selective Gold
Selective Gold
1311097-1
1311098-1
29.9
[1.18]
Straight Plugs, Latching,
Crimp/Crimp
Assembly
27.8
9.6
[0.38]
Dia.
[1.09]
Cable Type
RG 179B/U
BT2003
Body Plating
Selective Gold
Selective Gold
Selective Gold
Selective Gold
Selective Gold
Part No
1311099-1
1311100-1
1311101-1
1311696-1
1311102-1
BT2002
BT2001
BT3002, TZC75024
RG 59B/U,
RG 140/U, URM90
Selective Gold
1313507-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
187
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, 75 Ohm BT 43 (SMZ) (Continued)
17.93
Max.
Right-Angle Socket,
Snap-On, Solder/Crimp
[0.71]
21.67
[0.85]
Max.
16.86
[0.66]
Max.
10.16
[0.40]
Max.
Cable Type
Body Plating
Selective Gold
Selective Gold
Part No
1311103-1
1311104-1
RG 179B/U
BT3002, TZC75024
23.0
[0.91]
Right-Angle Socket,
Latching, Solder/Crimp
Ref.
21.0
Ref.
[0.83]
16.3
[0.64]
Ref.
9.9
[0.39]
Ref.
Cable Type
RG 179B/U
Body Plating
Selective Gold
Selective Gold
Selective Gold
Selective Gold
Part No
1311106-1
1311698-1
1311111-1
1313508-1
BT2003
BT3002, TZC75024
RG 59B/U, RG 140/U
30.4
Assembled
[1.20]
Straight Free Plug,
Crimp/Crimp
20.2
[0.80]
5.60
[0.22]
8.82
[0.35]
Dia.
Cable Type
Body Plating
Part No
RG 179B/U
Selective Gold
1408041-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
188
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, 75 Ohm BT 43 (SMZ) (Continued)
30.8
Assembled
[1.21]
Straight Bulkhead Plug
28.5
[1.12]
10.8
[0.43]
3.0 Max
[0.12] Panel
8.4
[0.33]
Dia.
5.6
[0.22]
7.5
[0.30]
Mounting Detail
Body Plating
Termination Method
Cable Type
Part No.
Inner
Outer
RG 179B/U
Crimp
Crimp
Selective Gold
Selective Gold
Selective Gold
1311120-1
1311701-1
1311122-1
BT500B, BT2003,
BT2003A
Crimp
Crimp
Crimp
Crimp
BT3002, TZC75024
32.1
[1.26]
Assembled Length
± 0.05
10.75
[0.42
± .002
]
7.50
[0.30]
A/F
8.00
[0.31]
Dia.
Panel Cut Out
Termination Method
Cable Type
Body Plating
Part No.
1313511-1
Inner
Outer
3M: 043, 031C,
CS4456, Gore: GCX
Crimp
Crimp
Selective Gold
20.4
[0.80]
Right-Angle Bulkhead Plug,
Solder/Crimp
16.7
[0.66]
Ref.
21.5
[0.85]
Ref.
10.1
[0.40]
Ref.
Cable Type
Body Plating
Part No
1311115-1
RG 179B/U
Selective Gold
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
189
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, 75 Ohm BT 43 (SMZ) (Continued)
30.4
Assembled
[1.20]
DDF Plug,
Crimp/Crimp
27.9
[1.10]
10.3
Dia.
[0.41]
Cable Type
RG 179B/U
BT2003
Body Plating
Selective Gold
Selective Gold
Selective Gold
Selective Gold
Selective Gold
Part No
1327083-1
1311117-1
1311700-1
1313883-1
1311118-1
BT2002
B2001
BT3002, TZC75024
RG 59B/U, RG 140/U,
URM90
Selective Gold
1313887-1
DDF Plug,
Crimp/Crimp
7.54
[0.30]
Ref.
27.8
Ref.
[1.09]
Cable Type
Body Plating
Part No
RD179, 124431 (Filotex),
1366 (Orebro), K02253D-1,
K02253-2 (Shuner)
Selective Gold
1314422-1
PC Board Plug 43/1D
PC Board Plug 43/1E
11.4
[0.45]
13.2
[0.52]
5.08
[0.20]
6.20
[0.24]
3.80
[0.15]
5.08
[0.20]
9.5
[0.37]
5.08
[0.20]
Dia.
5.08
[0.20]
15.0
[0.59]
0.90
[0.04]
6.5
[0.26]
Sq.
Dia.
1.70 Dia.
1.20 Dia.
1.70 Dia.
[0.067] 4 Holes
1.20 Dia.
[0.047] 1 Hole
[0.07] 4 Holes
[0.05] 1 Hole
Mounting Detail
Mounting Detail
Body Plating
Part No.
Body Plating
Part No.
Selective Gold
1311125-1
Selective Gold
1314103-1
Right-Angle PC Board Plug
22.14
[.872]
5.08
[.200]
5.08
[.200]
± 0.10
± .004
Ø 8.35
[.329
Ø 1.20
[.047]
Min.
]
5/16-32
UNEF
Ø 1.70 Min.
[.067] 4 Holes
14.00
[.551]
2.54
[.100]
Ø 6.22
[.245]
2.54
[.100]
3/8 Across Flats
Ø 8.21
[.323]
± 0.10
± .004
2.90
[.114
Mounting Detail
Panel Cutout Detail
]
Part No. 1314102-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
190
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, 75 Ohm BT 43 (SMZ) (Continued)
17.1
[0.67]
Straight Adapter
Plug-Plug
17.0
[0.67]
7.5
[0.30]
11.0
[0.43]
Dia.
8.0
[0.31]
Dia.
8.7
[0.34]
A/F
2.2 Max.
[0.09] Panel
Mounting Detail
Part No. 1313364-1
Part No. 1311127-1
Body Plating
Part No.
1313364-1
1311127-1
Selective Gold
Selective Gold
37.4
[1.47]
Tester 430A
11.1
[0.44]
8.8
[0.35]
Dia.
Dia.
Body Plating
Part No.
Selective Plating
6-1311703-1
100.0
[3.94]
Extraction Tool 65A
10.0
[0.39]
Dia.
Part No.
1311164-1ꢀ
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
191
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMB Connector Crimp Tooling
50 Ω/75 Ω
Commercial Connector Tooling
Center Contact Crimp Tooling Braid Crimp Tooling
MIL Type Connector Tooling
Center Contact Crimp Tooling Braid Crimp Tooling
MIL-C-
22520/2-01
Tool
Dies for
Tyco Electronics
PRO-CRIMPER
Hand Tool
Dies for
Tyco Electronics
PRO-CRIMPER
Hand Tool
Dies for
Tyco Electronics
PRO-CRIMPER
Hand Tool
MIL-C-
22520/5-01
Tool
DANIELS* Hex
Crimp Die
RG/U
Cable
DANIELS* DANIELS*
DANIELS Hex Die
Selector
Position
Hand
Tool
Positioner
Number
Hand
Tool
Across
Flats
DANIELS* Position
Positioner
Number
Number Position
Number Position
178, 178A,
178B, 196,
196A
Female-K699
4
Female-K699
Male-K727
2.67
.105
58489-1
58489-1
A&B
Y624
AFM8
4
58483-1
A
HX4-1637
Male-K727
Double Braid
178, 196
Female-K699
Male-K727
3.25
—
—
—
4
—
—
A
—
AFM8
AFM8
4
4
58483-1
58483-1
B
B
HX4-1637
HX4-1637
.128
174, 316
188, 188A
Female-K699
Male-K727
Female-K699
Male-K727
3.25
.128
58489-1
58489-1
Y444
Double Braid
174, 316,
188
Y196
3.84
58489-1
58489-1
Female-K699
Male-K727
4
4
58489-1
58489-1
C
C
AFM8 Female-K699
4
58483-1
58483-1
C
B
HX4-1637
HX4-1637
Location A
.151
Double Braid
174, 316,
188
Y196
Location A
3.25
.128
AFM8
Solder
—
179, 179A
179B, 161,
3.25
.128
58489-1
Female-K699
4
58489-1
A
Y444
AFM8 Female-K699
4
58483-1
B
HX4-1637
187, 187A,
BELDEN 9221
179, 179A
179B, 161,
3.25
58489-1
Male-K727
—
4
58489-1
A
Y444
—
—
—
Solder
Solder
—
—
58483-1
58483-1
B
HX4-1637
HX4-1637
187, 187A,
.128
BELDEN 9221
180, 180A
180B
3.84
.151
—
—
—
—
C
Mini SMB 75 ohm
179, 187
—
—
Female-K699
—
—
58483-1
58483-1
B
B
HX4-1637
HX4-1637
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Solder
Center
Contact
179, 187
Note: All 75 ohm SMB connectors have a solder center contact.
Note: Equivalent military tool part numbers– M22520/5-37 – DANIELS Die Set Y138
M22520/5-01 – DANIELS Hand Tool HX4
M22520/5-33 – DANIELS Die Set Y136
M22520/5-41 – DANIELS Die Set Y140
M22520/5-03 – DANIELS Die Set Y196
M22520/2-01 – DANIELS Hand Tool AFM8
* DANIELS Manufacturing Corporation
6103 Anno Avenue
Orlando, Florida 32809
Telephone: 407-855-6161
FAX: 407-855-6884
BELDEN is a trademark of Belden Wire
and Cable Company.
DANIELS is a trademark of Daniels
Manufacturing Corporation.
Note: Part Numbers are RoHS compliant except:ꢀ Indicates non-RoHS compliant.
192
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMC Connectors
Product Facts
■ Three-piece designs
■ Fast, clean cable assembly
■ Connector bodies
preassembled
■ Solderless termination —
no danger of heat damage
■ Center conductor and braid
terminated with same tool
■ Low noise level
■ Miniature screw-on coupling
■ TEFLON dielectric
The SMC Connector is
miniature and light-weight,
especially designed for
use in critical applications
where limited space and
vibration are of major
concern.
Materials
Brass — QQ-B-626
Beryllium Copper — QQ-C-530
Copper — QQ-C-576
TEFLON Insulation — MIL-P-19468
Mechanical Characteristics
Mating/Unmating — 10-32 threaded
coupling
Cable Attachment — Crimp type,
both center contact and braid
Coupling Nut Retention —
35 lb ꢀ156 Nꢁ min.
Cable Retention — 20 lb ꢀ89 Nꢁ min.,
GR-174 cable
Durability — 500 cycles per
MIL-C-39012
Plating
Gold — MIL-G-45204
This connector is designed
in accordance with the
requirements of Specification
MIL-C-39012, Class II,
Category B to assure
Electrical Characteristics
Nominal Impedance — 50 ohms
Working Voltage — 335 volts rms
Frequency Range — 0 to 10 GHz
Insulation Resistance — 1000
megohms min.
Contact Resistance —
Outer Contact — 1 milliohms
Center Contact —
Straight Connectors — 6 milliohms
Right-Angle Connectors —
12 milliohms
Dielectric Withstanding Voltage —
1000 volts rms
RF Leakage — –60 dB min., between
2 and 3 GHz
RF Insertion Loss —
Straight Connectors — 0.25 dB max.
at 4 GHz
Environmental Characteristics
Temperature Range —
–65°C to +85°C
Vibration — MIL-STD-1344, Method
2005, Condition IV
Salt Spray — MIL-STD-1344, Method
1001, Condition B
Temperature Cycling —
MIL-STD-1344, Method 1003,
Condition A (except low temperature
is –65°C)
the highest standards of
electrical and mechanical
performance. It has a con-
stant impedance of 50 ohms,
a voltage rating of 350 volts
and provides excellent
operation at frequencies
up to 10 GHz. It also has a
threaded coupling and can
be used with a wide range
of miniature coaxial cable
sizes including RG 174,
197, 187, 188 and 316.
Right-Angle Connectors — 0.50 dB
max. at 4 GHz
Corona Level — 250 volts min. at
70,000 ft ꢀ21 336 mꢁ
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
193
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
specified. Values in brackets
are standard equivalents.
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMC Connectors (Continued)
Straight Plugs
26.00
Ref.
26.00
[1.022]
Ref.
[1.022]
16.90
[.667]
13.80
[.545]
13.80
[.545]
Ref.
Ref.
Ref.
9.50
9.50
[.375]
3.90
[.155]
Ref.
[.375]
3.90
[.155]
Reference
Plane
3.90
[.155]
Reference
Plane
Cable
Ref. Plane
Cable
Ref. Plane
Ref.
Ref.
Ref.
Cable
Ref.
Plane
Plane
SMC
Plug
SMC
Plug
SMC
Plug
5.50
[.218]
5.50
[.218]
5.90
[.234]
Hex.
Hex.
5.90
[.234]
5.90
[.234]
5.50
[.218]
Hex.
Hex.
Hex.
Hex.
Part No. 1060220-1
Crimp
Part No. 1060221-1
Crimp
Part No. 1060163-1
Clamp
Cable
Attachment
RG/U
Cable
Part No.
178, 178A, 178B
Crimp
Crimp
Clamp
1060220-1
1060221-1
1060163-1
196, 196A
174, 316
188, 188A
174, 316
188, 188A
24.20
[.953]
6.00 Across
[.236] Flats
Straight Jacks
Nom.
10-32, UNF-2A
Sub-Assembly
Clamp Nut
Cable
Attachment
RG/U
Cable
Part No.
174, 316
188, 188A
Clamp
1311638-1
3.18
[.125]
Contact
Ferrule
Bulkhead Feedthrough
Cable Jacks
5.94
[.234]
4.37
[.172]
Plug Assembly
Recommended Strip Length
Ø 4.88–5.00
Lockwasher
Nut
[.192–.197]
Cable
Customer Supplied
2.01–2.08
[.079–.082]
19.80
Max.
[.780]
6.35
Hex.
[.250]
Assembled View
Suggested Panel Cutout
Cable
RG/U
Cable
Part No.
51751-1
Attachment
174, 316
188, 188A
Crimp
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
194
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMC Connectors (Continued)
Ø 0.90
[.035]
Press-In Panel Jacks,
Straight Terminal
1.00
[.039]
3.50
[.138]
5.05
[.199]
5.20
[.205]
4.50
[.177]
5.00
[.197]
2.00
[.079]
16.50
[.650]
Part No. 1460470-1
1.00
[.040]
Right-Angle Cable Plug
Ref.
14.60
[.575]
Ref.
6.40
[.250]
SMC Plug
15.10
[.594]
Ref.
5.90
[.234]
Cable
Ref. Plane
He
Ref. Pla
5.50
Hex.
[.218]
6.50
[.256]
Ref.
Cable
Attachment
RG/U
Cable
Part No.
174, 316
188, 188A
Clamp
1060183-1
PC Board Jack
Receptacles
Straight
Right-Angle
11.00
[.432]
5.10
Typ.
1.00
[.038]
[.200]
Dia.
.190-32, UNF-2A
SMC Jack
3.90
Ref.
3.90
[.155]
0.50
[.152]
6.30
[.250]
1.00 Sq.
[.040] Typ.
1.80
[.070]
Typ.
[.020]
3.20
[.125]
6.20
3.90
[.155]
1.30
[.050]
6.40
Sq.
1.00 Sq.
[.040] 4 Plcs.
[.250]
[.243]
2.50
[.100]
Typ.
14.20
Ref.
1.00
[.038]
7.40
Ref.
Dia.
[.563]
5.10
[.200]
[.293]
Typ.
11.40
Ref. Plane
1.80
[.070]
Typ.
[.448]
90-32, UNF-2A
SMC Jack
Part No. 1060256-1
7.10
[.280]
Part No. 1060259-1
+ 0.08
– 0.00
Ø 1.30
[.051]
Ø 1.70
4 Plcs.
+ .003
[.067
]
– .000
2.54
[.100]
5.08
2.54
[.100]
[.200]
5.08
[.200]
Rcommended PC Board Layout
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
195
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
MCX Connectors
Product Facts
■ Snap-on interface facilitates
assembly
■ Conforms to CECC interface
specifications for MCX
■ 30% smaller than SMB
connectors
■ Surface mount tape and reel
for high volume
■ 50 and 75 ohm versions
available
Tyco Electronics MCX
ensuring full engagement.
The forces to engage and
disengage have been opti-
mized to ensure ease of
standard configurations for
commercial applications.
Tape and reel packaging for
MCX surface mount straight
microminiature snap-on
connectors offer an excel-
lent blend of size, durability
and performance for
mating as well as to prevent and right-angle PCB recep-
emerging applications in
GPS, automotive and wire-
less communications. MCX
damage to PCB solder
connections. MCX connec-
tors are designed for broad
tacles is available to facili-
tate high volume pick and
place manufacturing. MCX
surface mount connectors
are designed to withstand
infrared reflow, convection
and vapor phase soldering
and provide a .254 [.010]
standoff for optimal board
cleaning. MCX plug and
jack PCB receptacles also
offer a direct board to board
solution providing a nominal
7.11 [0.28] separation.
Between Series Adapters
For MCX Between Series Adapters, see
pages 251-260.
connectors are 30% smaller band performance, DC-6
than traditional snap-on
SMB connectors, offering
greater packaging density
and weight reduction. MCX
connectors are mechani-
cally robust with beryllium
copper spring fingers rated
GHz, and can be utilized
for future system upgrades
without concerns for
performance degradation.
Tyco Electronics MCX
connectors are fully mate-
able with standard MCX
at a minimum of 500 mating connectors and conform
cycles. The snap-on inter-
face facilitates assembly,
eliminating the need for a
threaded connection, and
to the CECC interface
specifications.
MCX connectors are avail-
able in a broad range of
196
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
specified. Values in brackets
are standard equivalents.
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
MCX Connectors (Continued)
Specifications
General
CECC 22220 PARA
Materials
Brass alloys UNS C36000 (ASTM-B16) or C38500 per QQ-B626, Beryllium copper per
ASTM B-196, PTFE fluorocarbon per ASTM-D-1710
—
Finish
—
—
—
Center Contacts:
Outer Contacts:
Housings:
Gold plated (ASTM-B488) over nickel plate (QQ-N-290)
Gold plated (ASTM-B488) over nickel plate (OO-N-290)
Nickel plated (QQ-N-290), tin (ASTM-B488) or Gold plated (ASTM-B488)
All other metal parts shall be furnished so as to provide a connector which meets corrosion
requirements of CECC 22220 PARA 4.6.10
—
—
Design
The design shall be such that the outline and interface dimensions shown in this catalog and the
requirements of CECC 22220 PARA are met
Electrical
CECC 22220 PARA (General requirements performance may vary by cable)
Frequency
—
dc - 6 GHz
Nominal Impedance
Voltage Rating
VSWR
—
50 ohms
—
335 Volts (VRMS Maximum) @ Sea Level
1.25:1 Maximum @ 4 GHz
1.35:1 Maximum @ 6 GHz
10,000 Megohms Minimum
.1dB Maximum/1000 MHz
1000 Volts (VRMS Minimum) @ Sea Level
4.4.1
—
Insulation Resistance
Insertion Loss
4.4.4
—
Dielectric Withstanding Voltage
Contact Resistance
Center Contact
4.4.5
4.4.2
5.0 Milliohms Maximum
Outer Contact
4.4.3
1.0 Milliohms Maximum
Corona 70,000 ft.
RF High Potential @ Sea Level
Contact Current
—
250 Volts (VRMS Minimum) @ MHz
670 Volts (VRMS Minimum) @ MHz
1.5 ADC Max
—
—
Mechanical
CECC 22220 PARA
Force to Engage
Force to Disengage
Contact Captivation
Connector Durability
Environmental
Temperature Rating
Vibration
4.5.4
15.5 N [3.4 lbs.] Maximum
—
8 – 20 N [1.8 – 4.5 lbs.]
4.5.2
Designed to maintain MCX interface when mating 10 N [2.2 lbs.] axial
500 insertion and withdrawal cycles
4.7.1
CECC 22220 PARA
—
–65˚C + 165˚C
4.6.3
4.6.4
4.6.10
4.6.7
See CECC 22220
See CECC 22220
See CECC 22220
See CECC 22220
Moisture Resistance
Corrosion
Thermal Shock
Meets or exceeds requirements of CECC 22220. Tyco Electronics has design control and all data contained herein is subject to change without notice.
Contact Tyco Electronics for specifications on other connector types.
F
E
N
D
J DIA.
C DIA.
B DIA.
A DIA.
H DIA.
I DIA.
G
K
L
M
Plug
Jack
Letter
Minimum
0.48 [.0189]
2.00 [.0788]
—
Maximum
0.53 [.0208]
—
Letter
Minimum
—
Maximum
1.98 [.077]
3.48 [.137]
3.75 [.147]
2.80 [.110]
2.80 [.110]
4.12 [.162]
0.85 [.0334]
A
B
C
D
E
F
H
I
3.42 [.135]
3.60 [.142]
2.30 [.091]
2.60 [.103]
4.00 [.158]
0.75 [.0296]
3.8 [.148]
0.30 [.0118]
3.20 [.125]
—
J
0.00 [.000]
2.80 [.111]
4.15 [.164]
2.80 [.111]
K
L
M
N
G
—
197
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
MCX Connectors (Continued)
16.3
[.642]
Straight Cable Plug,
Crimp
Ref.
MCX Plug
5.00
Dia.
[.197]
Cable
Plating
Nickel
Nickel
Gold
Part No.
RG 178/U, 196/U
1060869-1
1060872-1
1060871-1
1060875-1
1060875-2
RG 174/U, 188/U, 316/U
RD-316
Nickel
Gold
Note: For full crimp attachment consult Tyco Electronics at the numbers
listed below.
12.00
[.472]
Right-Angle Cable Plug,
Crimp
5.00
[.197]
Ref.
Sq.
3.50
[.137]
7.92
[.312]
6.15
[.242]
MCX Plug
Cable
Plating
Part No.
RG 178/U, 196/U
Nickel
1329293-1
RG 188/U, 316/U
RG 179/U, RG 187/U
Nickel
1330723-1
Nickel
Gold
1363301-1
1363301-2
RD-316
Straight Cable Terminal,
PC Board, Without Center
Contact
A Ref.
B
5.80
[.228]
Dia.
4.00
[.157]
Cable
Dim. A
Dim. B
Plating
Part No.
1060811-1
1060811-2
Nickel
Gold
11.76
.463
3.94
.155
RG 174/U,
188/U, 316/U
10.74
.423
2.92
.115
Gold
1060813-2
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
198
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
MCX Connectors (Continued)
17.0
[.669]
Bulkhead Cable Jack
Ref.
5.00
[.197]
Max Panel
Thickness
1.40
[.055]
4.80
Dia.
4.90
[.193]
Min.
[.189]
MCX
Jack
4.50
[.177]
Min.
Recommended
Mounting Hole
Cable
Plating
Part No.
1060883-1
RG 188/U, RG 316/U
Nickel
Straight Cable Plug,
Direct Solder Attachment
11.3
[.445]
For Semi-Rigid Cable
5.00
[.197]
Dia.
MCX
Plug
Cable
RG 405/U [.085]
.047
Plating
Part No.
Gold
Gold
1060772-1
1060772-2
Straight Cable Jack,
Direct Solder Attachment
11.9
[.469]
For Semi-Rigid Cable
MCX
Jack
5.00
[.197]
Dia.
Cable
RG 405/U [.085]
.047
Plating
Part No.
1060774-1
1060774-2
Gold
Gold
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
199
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
MCX Connectors (Continued)
7.00
[.276]
Right-Angle Plug Receptacle,
Direct Solder Attachment
5.00
[.197]
For Semi-Rigid Cable
3.48
[.137]
3.10
Dia.
[.122]
7.92
[.312]
6.15
[.242]
MCX
Plug
Cable
Plating
Part No.
1060787-1
RG 405/U
Gold
6.00
[.236]
Sq.
Vertical Plug Receptacle,
PC Board
5.08
[.200]
Typ.
3.94
[.155]
0.91
[.036]
4.45
[.175]
Sq.
4 Plcs.
0.97
[.038]
Dia.
MCX
Plug
5.77
[.227]
Plating
Nickel
Gold
Part No.
1061015-1
1085221-1
A
Vertical Jack Receptacle,
PC Board
5.08
[.200]
4.45
[.175]
Typ.
B
0.97
[.038]
Dia.
6.00
[.236]
0.91
[.036]
4 Plcs.
Sq.
Sq.
MCX
Jack
Dim. A
Dim. B
Plating
Part No.
1060985-1
1060984-1
1060989-1
1330126-1
1060996-1
1060995-1
Nickel
Gold
8.28
.326
2.92
.115
Nickel
Gold
9.30
.366
3.94
.155
Nickel
Gold
7.09
.279
1.73
.068
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
200
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
MCX Connectors (Continued)
10.31
[.406]
Vertical End Launch,
PC Board
Ref.
0.97
[.038]
Dia. Pin
4.45
[.175]
1.68
[.066]
MCX
Jack
3.91
[.154]
4.57
[.180]
4.70
[.185]
6.35
[.250]
Sq.
Plating
Part No.
Tin
1061007-1
6.00
[.236]
Sq.
Right-Angle Jack
Receptacle, PC Board
A
5.08
[.200]
Typ.
0.97
[.038]
Dia.
B
0.91
[.036]
4 Plcs.
Sq.
9.50
[.374]
6.50
[.256]
MCX Jack
3.00
[.118]
Dim. A
Dim. B
Plating
Part No.
1061023-1
1061022-1
1061027-1
1061026-1
1061030-1
1061029-1
Nickel
Gold
9.93
[.391]
3.94
[.155]
Nickel
Gold
7.72
[.304]
1.73
[.068]
Nickel
Gold
8.92
[.351]
2.92
[.115]
8.70
[.342]
Jack Receptacle,
Bulkhead Feedthrough
2.50 Max.
[.098] Panel
.580
[.023]
0.97
[.038]
Dia.
MCX
Jack
4.90
Dia. Min.
6.50
[.256]
[.193]
Dia.
.190-56,UNS-2A
6.35
Hex.
[.250]
4.50
[.177]
Min.
5.50 Across
[.217] Flats
Lockwasher
Recommended Mounting Hole
Plating
Part No.
1060960-1
1060959-1
Nickel
Gold
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
201
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
MCX Connectors (Continued)
Vertical Jack Receptacle,
Surface Mount
6.00
[.236]
5.90
[.231]
Ref.
Sq.
5.08
[.200]
Typ.
0.97
[.038]
Dia.
4.45
[.175]
0.91 Sq.
MCX Jack
[.036] 4 Plcs.
Plating
Part No.
6061002-1
6061092-11
Tin
1Tape and Reel packaging. 900
connectors per reel (carrier width
16mm, carrier pitch 12mm).
Right-Angle Jack Receptacle,
Surface Mount
6.00
[.236]
Sq.
6.50
[.256]
5.08
[.200]
Typ.
0.97
[.038]
Dia.
9.50
[.374]
6.50
[.256]
0.91 Sq.
[.036] 4 Plcs.
3.50
[.137]
MCX Jack
Plating
Tin
Part No.
6061035-1
6061094-11
Tin
1Tape and reel packaging. 750 con-
nectors per reel (carrier width
24mm carrier pitch 12mm).
8.89
[.350]
.510 Dia. Via.
[.020] 4 Plcs.
5.08
[.200]
5.72
[.225]
1.78 Dia. Pad
[.070] 5 Plcs.
2.54
[.100]
.953
[.375]
11.43
[.450]
5.08
[.200]
Notes:
2.54
1. Printed circuit board material:
glass epoxy FR-4 or similar; rela-
tive permittivity: 4.8, 1 oz. copper
clad both sides.
[.100]
2. These dimensions valid for 1.58
[.062] board thickness.
3. Decimal inch equivalents are
shown in parentheses for general
information only.
2.22
[.088]
4 Plcs.
4.45
[.175]
1 oz. Copper
Area Free of Solder Mask
Recommended Mounting Pattern for Microstrip Line
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
202
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
MCX Connectors (Continued)
17.5
[.687]
Straight Cable Plug,
Crimp, 75 Ohm
Ø 5.0
[.196]
Cable
Plating
Nickel
Part No.
RG 179/U
1362990-1
12.4
[.490]
Right-Angle Cable Plug,
Crimp, 75 Ohm
9.9
[.390]
7.9
[.312]
6.1
[.241]
Cable
Plating
Part No.
RG 179/U
Nickel
1362991-1
6.0
[.236]
Vertical Plug, PC Board,
75 Ohm
Sq.
6.86
[.270]
5.08
1.91
[.075]
[.200]
Typ.
Typ.
6.35
[.250]
Ø 0.71
[.028]
0.91
[.036]
Sq.
4 Plcs.
2.54
[.100]
Typ.
Plating
Nickel
Part No.
1361169-1
Vertical Jack, PC Board,
75 Ohm
10.0
[.394]
6.0
Sq.
[.236]
5.99
[.236]
1.3
[.051]
Thru
5.08
[.200]
Sq.
2.54
[.100]
3.4
[.134]
0.7
[.026]
5 Plcs.
Dia.
0.8
[.036]
4 Plcs.
Sq.
5.08
[.200]
9.4
[.370]
6.4
[.252]
Plating
Part No.
Gold
1363106-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
203
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Compression Coax Board-to-Board Connectors
Board-to-Board RF
Connector Series
■ Single connector product
■ Surface mount technology
■ Excellent price-to-
performance ratio
Product Facts
■ Single connector design —
no mating connectors
needed
■ Available in four sizes for
varied board spacing:
14mm, 10mm, 6.65mm and
4mm
■ Large radial and axial
misalignment: For
Specifications
Characteristic Impedance —
50 Ohms
Frequency Range — Up to 6 GHz
Return Loss — –20dB min.; up to
2.2 GHz (all misalignments)
positioning both boards and
for gap between boards
2° Max.
■ Surface Mount Device for
standard pick & place
compatibility
■ Gold plated phosphor
bronze and brass contacts,
stainless steel springs
■ Mating directly on target
board
■ Easy connection without risk
of breaking soldering or
connector when mating or
unmating
Target Board
Shielding Effectiveness —
–60 dB min.; up to 2.2 GHz
Working Voltage — 125 VAC, 50 Hz
(at sea level)
Dielectric Withstanding Voltage —
500 VAC, 50 Hz (at sea level)
Insulation Resistance —
100 Megohms
Operating Temperature —
–40 to +125°C
Mating Force — 10 N
Durability — 25 cycles
Angle Between Boards — 2° max.
H
■ Low applied material and
Axial Misalignment — 1.0mm
from nominal boards stacking height;
0.4mm, 0.3mm for shortest models
(Part Numbers 619135 and 1658260)
Radial Misalignment — 0.8mm
from center line in any direction
Vibration — 20 g between 58-500 Hz
(Const. amplitude of 1.5 mm between
10-58 Hz)
assembly costs
Base Board
Applications
■ Modular parallel board-to-
board blindmate
applications
■ Base Station / Sub Station
systems
Part Number
619127-1
Height “H”
14 ± 1.0mm
10 ± 1.0mm
6.65 ± 0.4mm
4 ± 0.3mm
619134-1
■ PDA / PCS / Cellular
Handset applications
619135-1
1658260-1
■ Wireless Communications
systems (GSM, PCS,
WCDMA, UMTS)
Related Product Data
Internet — http://tycoelectronics.com/products/rfcoax
Product Specification/Design Objectives — 108-71060
Test Report — 501-90021
Sample Kit — 1-1773441-3
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
204
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
STAX Coax Connectors
Product Facts
■ Low cost, low height and
high performance
■ Low insertion loss
0 to –0.5 dB from 0 to 6 GHz
■ VSWR < 1.07 from 0 to 6 GHz
■ Wide working range of
deflection
■ Long term reliability and
durability
■ Surface mount/pick and
place
■ Low board separation
≤ 2.5 mm
■ Technology can support
board separations ≤ 1.5 mm
■ Easily modified free height
■ No tooling required for
height modifications
Tyco Electronics’ STAX
coax RF connector is the
first surface mount RF
board-to-board connector
on the market that uses
elastomeric connector
technology to provide an
economical means to
achieve low board separa-
tion while maintaining
excellent RF signal integrity
between PCBs.
impedance line between
mated substrates. The
single piece construction
of the STAX coax RF
connector eliminates some
of the signal anomalies
normally associated with
soldered to the PCB. An
additional metal SMT holder
aligns the connector to the
mating PCB. If adequate
PCB alignment is already
maintained by other means,
the STAX RF connector may
■ Modified prototype samples
within 2 weeks
mated pairs of metal contact not need the additional
coax connectors. The
dimensional relationship
of the inner and outer
conductor is consistently
maintained throughout the
connector.
mating receptacle and
can become a blindmating
connector. This has an
additional advantage in
space constrained mobile
applications where very
fine-pitch board-to-board
connectors are also used.
The connector uses
laminated sections of
conductive and non-
conductive silicone that are
tuned to provide a 50 ohm
With its metal holder, the
STAX coax RF connector
can be surface mount
Electrical Characteristics
Contact Resistance — < 50 mΩ
Insulation Resistance — 1012 Ω
min.
Dielectric Withstanding Voltage
(without breakdown or arcing) —
1000 Volt
Related Product Data
Physical Characteristics
Board Separation — 2.5 mm 0.2
(std. part)
Internet — www.elastomerictech.com
www.tycoelectronics.com
Elastomeric Technologies Applications Engineering —
PCB Board Area — 4.0 mm dia.
Typical Clamping Force — See chart
Phone: 1-800-989-STAX ext. 4453
Fax:
1-215-784-4522
E-mail: ETIapplicationseng@tycoelectronics.com
Environmental Characteristics
Operating Temperature —
Technical Documents —
Qualification Test Report — T R 368
RF Performance Report — 00266
–40°C to +125°C
Moisture — 0 to 100% RH
205
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
STAX Coax Connectors (Continued)
Description
Part Number
619229-1
STAX SMT Coax Connector Assembly:
Consists of STAX Coax elastomer in round SMT holder
Mating SMT Target Holder:
Controls alignment between PCBs
619238-2
STAX Coax RF Elastomer only:
Used with customer furnished holder
1442004-1
Part Number 619229-1
SMT STAX Coaxial
Connector Assembly
± 0.20
2.50
[.098
± .008
]
0.55
[.022]
Mated Condition
Center Conductor
Dielectric
Material Board
4.00
[.157]
Outer Conductor
Solder Ring
3.20
[.126]
Unmated
2.20
[.087]
Solder Mask
1.60
[.063]
2.40
[.094]
3.20
[.126]
Conductive
Elastomer
Outer
0.40
[.016]
3.50
[.138]
Conductor
4.30
[.169]
PCB Pattern
2.40
[.094]
0.40
[.016]
Conductive Elastomer
Inner Conductor
Non-conductive Elastomer
0.55
[.022]
Part Number 619238-2
SMT Mating Target Holder
Center Conductor
Dielectric
Material Board
Outer Conductor
Solder Ring
5.00
[.197]
Solder Mask
1.50
[.059]
1.60
[.063]
3.60
[.142]
4.20
[.165]
5.00
[.197]
PCB Pattern For Mating Target
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
206
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMT/QuickGrip Connectors
system. The SMT/QuickGrip
design provides optimal
cable retention for applica-
tions where shock, vibra-
tion, and/or cable flexure
may be encountered. This
unique RF design accepts
both flexible and semi-rigid
micro-coaxial cables while
delivering exceptional RF
performance up to 3GHz.
Product Facts
■ Solderless Cable
Termination
■ 3.0 [.118] Mated Height
■ Excellent Cable Retention
■ Usable With Flexible and
Semi-Rigid Micro-Coaxial
Cables
■ Tape and Reel Packaging
These features make this
system extremely versatile
for design engineers and
offer a reliable, cost effective
alternative to direct solder-
ing of cable to the PCB. The
cable is inserted into the
device by means of a sim-
ple self-aligning hand tool,
eliminating the requirement
for skilled personnel. This
system removes the possi-
bility of damaged PCBs and
cables which are common
quality issues associated
with direct solder, while pro-
viding superior RF perform-
ance. The SMT/QuickGrip
accommodates multiple
cable insertions allowing
easy replacement of cables
for repairs. This receptacle
is designed for high volume
assembly using surface
mount technology and is
available in tape and reel
packaging for pick and
Tyco Electronics revolution-
ary SMT/QuickGrip product
line is designed to meet the
growing demand for a reli-
able, low cost system for
direct termination of coax to
a printed circuit board
(PCB). SMT/QuickGrip
technology eliminates the
requirement to connectorize
the coaxial cable, reduc-
ing assembly times and,
therefore, cost. The
SMT/QuickGrip surface
mount device occupies less
PCB area than conventional
through hole coaxial con-
nectors. An innovative
series cable pigtails are
mechanical and electrical
performance, coupled with
its ease of use, ensure it to
be a high quality, reliable
solution for current and
future interconnect needs.
Tyco Electronics is an
ISO9001 certified manufac-
turer and maintains an SPC
controlled manufacturing
environment. Please call
your local Sales or
available as turnkey solu-
tions for your application
needs (i.e.: for use in
multi-board applications, for
connecting antennas to the
PCB, or point to point trans-
mission on the same PCB).
microstrip mounting pattern
and cable receptacle
design ensures excellent
grounding and PCB reten-
tion. The SMT/QuickGrip
cable termination system
stands a mere 3.0 [.118] off
the board when mated,
allowing for closer pitch/
spacing when designing a
The SMT/QuickGrip cable
termination system is ideal
for wireless surface mount
applications in handsets,
pagers and personal
digital assistants (PDA).
The SMT/QuickGrip
Distribution office for
additional information and
qualification samples today.
place board assembly. Pre-
stripped cables and inter-
6.4
[.250]
Ref.
3.2
Ref.
[.120]
1.3
Cable Jacket
Cable Braid
Cable Conductor
Cable Dielectric
1.26
1.22
1.18
1.14
1.1
3.0
Ref.
[.120]
PWB
2.1
3.0
Ref.
0.3
0.6 0.9
1.2
FREQUENCY (GHz)
Typical VSWR using SMT/QuickGrip with Omni-Flex 200 Cable
1.8
2.1
2.4
2.7
3
[.120]
Ref.
[.083]
PWB
Omni-Flex 200 cable is a
Tyco Electronics specified cable.
207
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMT/QuickGrip Connectors (Continued)
Specifications
General
Materials
Housing:
Contacts:
Finishes
Contacts:
Polyphenylene Sulfide (PPS)
Copper Alloy
Gold Plate over Nickel
Electrical
Frequency Range:
Impedance:
Insertion Loss:
DWV:
DC - 3GHz
Usable with 50 & 75 Ohm systems
.08 ƒGHz
√
750 VRMs
VSWR:
1.3:1@ 3GHz (Omni-Flex 200 and .047 [.002] Semi-Rigid)
1.4:1 @ 3GHz (.034 [.001] Semi-Rigid)
Mechanical
Connector Durability:
5 mating cycles min. (receptacle only)
16 [.629] per EIA-481
Tape and Reel Packaging:
Force to Disengage by
Cam-Out (grams):
Omni-Flex 200 Cable -
.034 [.001] Semi-Rigid -
.047 [.002] Semi-Rigid -
543 typical
852 typical
1066 typical
Environmental
Temperature Rating:
–40°C(–40°F) to 125°C(257°F) when mated with Omni-Flex 200 Cable
Resistance to Solder Heat:
Infrared, convection, and vapor phase solderable (receptacle only).
Maximum reflow time/temperature not to exceed 260°C for 3 minutes.
Cable Information
Omni-Flex 200 Cable
Materials:
Jacket:
FEP Flexible Cable (200°C)
Fluorinated Ethylene Propylene
Shield:
Silver plated copper wire,
44 AWG, 90% min. coverage
Dielectric:
PTFE (Polytetrafluoroethylene)
Silver Plated Copper Clad Steel, 30 AWG
6.35 [.250]
Center Conductor:
Minimum Bend Radius:
Insertion Loss (PVC and FEP cable only):
1.3dB/m, 0.4 dB/ft. @ 500 MHz
2.0dB/m, 0.5 dB/ft. @ 1 GHz
3.0dB/m, 0.9 dB/ft. @ 2 GHz
Center Conductor Resistance:
.26 Ohms per foot average
Strip Dimensions
Tyco Electronics
Semi-Rigid Cable
(.034 and .047)
Omni-Flex 200 Cable
Part Number 1407578-1
Ø 1.30
Ref.
Ø 0.87
[.034]
Ø 1.19
[.047]
or
Ref.
[.051]
Leave Jacket
Slug On To
Protect Braid
Omni-Flex 200 cable is a
Tyco Electronics specified cable.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
208
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMT/QuickGrip Connectors (Continued)
PC Board Mount
Receptacle
Pick and Place
Feature
1.3
[.050]
0.6
[.025]
Center Contact
3.2
[.125]
3.0
[.120]
Center Contact
Terminal
0.5
1.3
[.050]
[.020]
Ground
Contact
6.4
[.250]
3.4
[.135]
7.8
[.305]
4.3
[.169]
2 Plcs.
0.5
[.020]
0.6
[.024]
2 Plcs.
Ø 0.5
[.020]
Via. 5 Plcs.
2.4
[.096]
9.0
[.345]
1.3
[.050]
1.5
[.058]
3.4
[.133]
2.4
[.095]
Circuit Line
Ground Pad
2.5
[.100]
1.3
[.050]
1.0 oz.
[.0014]
Area Free of
Solder Mask
3.8
[.150]
Copper
Recommended Mounting Pattern for Microstrip Line
Description
Bulk Packaged 100/bag
700 Piece Reel
Part No.
1085456-1
1086008-1
1086009-1
2000 Piece Reel
1. Printed wiring board material: glass epoxy FR-4 or similar,
relative permittivity: 4.8, 1 oz. copper clad both sides.
2. These dimensions valid for 1.6 [.062] board thickness.
Cable Insertion Tool
Part No.
1088313-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
209
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMT/QuickGrip Connectors (Continued)
Inter-Series Cable
Assemblies
SMA Straight Plug
Length A
Cable
Assembly Length (A)
100 [4]
Part No.
1329174-1
1329174-2
1310432-1
19.2
[.755]
Ref.
Omni-Flex 200
200 [8]
305 [12]
Note:
1. Cable length tolerances: Length ‘A’ mm [In], Tolerance mm [In],
50 to 100 [3.94], ± 3 [± .12], 101 to 500 [3.98 to 19.69], ± 5 [± .20],
Over 500 [19.69], ± 10 [± .39]
SMA Bulkhead Jack
Length A
21.3
[.837]
Ref.
6.40
Min.
[.250]
6.00
[.235]
Min.
Recommended
Mounting Hole
Cable
Assembly Length (A)
Part No.
1329175-1
1329175-2
1329175-3
100 [4]
200 [8]
305 [12]
Omni-Flex 200
Note:
1. Cable length tolerances: Length ‘A’ mm [In], Tolerance mm [In],
50 to 100 [3.94], ± 3 [± .12], 101 to 500 [3.98 to 19.69], ± 5 [± .20],
Over 500 [19.69], ± 10 [± .39]
Omni-Flex 200 cable is a
Tyco Electronics specified cable.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
210
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMT/QuickGrip Connectors (Continued)
Inter-Series Cable
Assemblies (Continued)
SMB Bulkhead Jack
Length A
Cable
Assembly Length (A)
100 [4]
Part No.
1408050-4
1408050-5
1408050-6
17.1
[.675]
Ref.
Omni-Flex 200
200 [8]
305 [12]
Note:
1. Cable length tolerances: Length ‘A’ mm [In], Tolerance mm [In],
50 to 100 [3.94], ± 3 [± .12], 101 to 500 [3.98 to 19.69], ± 5 [± .20],
Over 500 [19.69], ± 10 [± .39]
4.90
[.192]
Min.
Min.
4.40
[.172]
Recommended Mounting Hole
SMB Right-Angle Plug
Length A
12.7
[.500]
Cable
Assembly Length (A)
100 [4]
Part No.
1255378-4
1255378-5
1255378-6
Ref.
Omni-Flex 200
200 [8]
305 [12]
Note:
1. Cable length tolerances: Length ‘A’ mm [In], Tolerance mm [In],
50 to 100 [3.94], ± 3 [± .12], 101 to 500 [3.98 to 19.69], ± 5 [± .20],
Over 500 [19.69], ± 10 [± .39]
14.0
[.550]
10.8
[.427]
MCX Bulkhead Jack
Length A
16.8
[.662]
Ref.
Cable
Assembly Length (A)
100 [4]
Part No.
1408051-4
1408051-5
1408051-6
4.80
[.189]
Ø 4.90
[.192]
Min.
Min.
Omni-Flex 200
200 [8]
305 [12]
Note:
4.50
[.177]
1. Cable length tolerances: Length ‘A’ mm [In], Tolerance mm [In],
50 to 100 [3.94], ± 3 [± .12], 101 to 500 [3.98 to 19.69], ± 5 [± .20],
Over 500 [19.69], ± 10 [± .39]
Min.
11.4
[.447]
Ref.
Recommended
Mounting Hole
MCX Right-Angle Plug
Length A
Cable
Assembly Length (A)
100 [4]
Part No.
1330401-4
1330401-5
1330401-6
10.8
[.425]
Ref.
Omni-Flex 200
200 [8]
305 [12]
Note:
7.90
[.312]
6.10
[.241]
1. Cable length tolerances: Length ‘A’ mm [In], Tolerance mm [In],
50 to 100 [3.94], ± 3 [± .12], 101 to 500 [3.98 to 19.69], ± 5 [± .20],
Over 500 [19.69], ± 10 [± .39]
Omni-Flex 200 cable is a
Tyco Electronics specified cable.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
211
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SSMT Surface Mount Interconnect System
Microminiature Surface
Mount RF Connectors
Product Facts
■ 3.0 [.118] mated height
■ Excellent interface retention
■ Flexible micro-coax cable
■ 360 degree mated rotation
■ Tape and Reel packaging
available
The Tyco Electronics SSMT
surface mount Interconnect
System is designed to pro-
vide superior electrical and
mechanical performance
for wireless communication
applications. The SSMT
system occupies less
printed circuit board (PCB)
real estate than conven-
tional through hole coaxial
connectors. An innovative
microstrip mounting pattern
and plug receptacle design
ensure reliable grounding
and PCB retention
characteristics. The SSMT
Interconnect System allows
closer pitch/spacing,
standing 3.0 [.118] (fully
mated height) off the board.
The mated SSMT interface
allows 360 degrees of
applications where shock,
vibration or cable flexure
may be encountered. Force
to disengage by cable
load (cam-out) exceeds
300 grams.
assembly using surface
mount technology and is
available in tape and reel
packaging for automatic
pick and place board
assembly. The mating cable
jack is available terminated
to a highly flexible micro-
coax cable as either a
The SSMT system is
designed to provide the
performance of much larger
industry standard connec-
tors. The SSMT Interconnect
System consistently
pigtail, jumper or standard
interseries connector assem-
bly to meet your needs.
achieves broad band elec-
trical performance through
6 GHz with a maximum
VSWR of 1.20:1 at 2 GHz.
This broad band perform-
ance establishes a reliable
interface that can be utilized SSMT interface design
for future system upgrades aligns the center contacts
without concern for perform- prior to full mating to
ance degradation.
The SSMT Interconnect
System can be manually
mated, facilitating high
volume assembly and elimi-
nating the need for special
engagement tooling. The
ensure a robust mechanical
engagement. Interface
durability is rated at 100
mating cycles.
The SSMT utilizes a common
plug receptacle, part num-
ber 1251802-1, which is
designed for high volume
rotation providing maximum
PCB design flexibility. It
has been designed to pro-
vide optimal retention for
212
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
specified. Values in brackets
are standard equivalents.
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SSMT Surface Mount Interconnect System (Continued)
Specifications
General
Materials
SMT Plug
Housing:
Contacts:
Polyphenylene Sulfide (PPS)
Copper Alloy
SSMT Cable Jack
Outer Contact:
Inner Contact:
Dielectric:
Beryllium Copper
Beryllium Copper
Polypropylene, GF
Finish
Plug and cable jack - Contacts: Gold plate over nickel plate
Electrical
Frequency
dc - 6 GHz
Nominal Impedance
Voltage Rating
VSWR (Mated Pair)
50 Ohms
250 Volts (VRMS Maximum) @ Sea Level
1.20:1 Maximum @ 2 GHz
1.40:1 Maximum @ 6 GHz
Insulation Resistance
Dielectric Withstanding Voltage
Contact Resistance (Connectors Only)
Center Contact
5000 Megohms Minimum
500 Volts (VRMS Minimum) @ Sea Level
15 milliohms Maximum
10 milliohms Maximum
.15dB Max. @ 6 GHz
Outer Contact
Insertion Loss (Connectors Only)
Mechanical
Connector Durability
100 mating cycles
Tape/Reel Packaging (Plug)
Force to Engage
12mm per EIA-481
5.5 lbs. Max. (3.5 lbs. typ.)
Force to Disengage
(2.0 lbs. typ.) 4.0 lbs. Max. (2.0 lbs. typ.)
300 Grams Min. (800 Grams typ. initial mate)
Force to Disengage by
Cable Load (camout)
Environmental
Temperature Rating (Mated Pair)
–40°C (–40°F) to +125°C (257°F)
Resistance to Solder Heat
Infrared, convection and vapor phase solderable (plug only).
Maximum reflow time/temperature not to exceed 260°C for 3 minutes.
Cable Specifications
Materials
Jacket:
FEP (polytetrafluoroethylene)
Shield:
Silver plated copper wire, 44 AWG, 90% min. coverage
PTFE ( polytetrafluoroethylene)
Dielectric:
Center Conductor:
Minimum Bend Radius
Insertion Loss (Cable Only)
Silver plated copper clad steel, 30 AWG
6.35mm (.250 inch)
0.5 dB/ft., 2.0 dB/m @ 1 GHz
0.9 dB/ft., 3.0 dB/m @ 2 GHz
Center Conductor Resistance
.25 Ohms per foot average.
819 milliohm/meter Nom.; 250 milliohm/Ft. Nom.
1.3
[.052]
Dia. Ref.
1.0
[.040]
Dia. Ref.
0.8
[.030]
Dia. Ref.
0.3
Dia. Ref.
[.010]
Center
Conductor
Shield
(Braid)
Dielectric
Outer Jacket
213
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
www.tycoelectronics.com
RF Coax Connectors
SSMT Surface Mount Interconnect System (Continued)
Ground
Terminal
(3 Plcs.)
Straight SMT PCB Mount
Plug Receptacle
4.5
[.177]
2.1
[.081]
4.0
[.157]
Center
Contact
(Pin)
2.1
[.049]
5.0
[.197]
4.5
[.177]
0.4
[.015]
1.0
[.039]
4 Plcs.
Center
Contact
Terminal
0.5
[.020]
4 Plcs.
Center
Outer
Contact
3.0
[.118]
0.6
[.025]
Contact
Terminal
Packaging
Quantity
Part No.
Bulk
Multiple of 100
1251802-1
178
Dia. Taping
Dia. Taping
800 pcs/reel
1083946-1
1055689-1
7.0
330
13.3
3000 pcs/reel
5.3
[.207]
2.9
[.113]
(See Note 2)
0.6
[.024]
1.6
[.064]
(See Note 2)
1.2
[.047]
0.5 VIA Holes
[.020] 3 Plcs.
1.2
[.047]
1.2
[.047]
7.0
[.274]
Notes:
3.0
[.118]
6.0
9.0
1. Printed wiring board material:
glass epoxy. FR-4 or similar, rela-
tive permittivity: 4.8, 1 oz. copper
clad both sides.
[.236]
[.354]
1.2
[.047]
1 oz.
[.0014]
Copper
0.5
[.019]
3.3
[.128]
2. These dimensions valid for 1.6
[.062] board thickness.
3.3
[.128]
Area Free of
Solder Mask
Recommended Mounting Pattern for Microstrip Line
Right-Angle Jack to
Jack Cable Assembly
Assembly Length (A)
100 [4.0]
Part No.
1064524-1
1064530-1
1064533-1
200 [8.0]
305 [12.0]
3.4
Ref.
[.132]
Length A
Centerline to Centerline
2.1
[.081]
5.3
[.208]
Ref.
Ref.
1.3 Ref.
[.052] Cable
2.5 Dia.
[.100] Ref.
SSMT
Jack
Notes:
1. Consult Tyco Electronics for non-standard cable lengths.
Length A Tolerances.
Length A
Tolerance
50 To 100 [3.94]
± 3 [± .12]
101 To 500 [3.98 to 19.69] ± 5 [± .20]
Over 500 [19.69] ± 10 [± .39]
2. Connector centerlines align ± 30° as shown for lengths of 165 [6.5] or less. Cable assemblies over 165 [6.5] have
randomly aligned connectors.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
214
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SSMT Surface Mount Interconnect System (Continued)
Right-Angle Jack to Jack
Cable Assembly
(180° Offset)
Assembly Length (A)
Part No.
100 [4.0]
1082845-1
Length A
Centerline to Centerline
Ø 2.5
5.3
[.208]
2.1
[.081]
[.100]
Ref.
Ref.
1.3
Ref. Cable
[.052]
SSMT Jack
Notes:
1. Consult Tyco Electronics for non-standard cable lengths.
Cable length tolerance:
Length A Tolerances.
Length A
Tolerance
50 To 100 [3.94]
± 3 [± .12]
101 To 500 [3.98 to 19.69] ± 5 [± .20]
Over 500 [19.69] ± 10 [± .39]
2. To avoid damaging the cable, minimize time at temperature
while soldering and/or applying heat to unterminated end of
cable.
Right-Angle Jack Cable
Pigtail
Assembly Length (A)
100 [4.0]
Part No.
1064535-1
1064538-1
1064540-1
1064542-1
200 [8.0]
305 [12.0]
510 [20.0]
3.4
Ref.
[.132]
Notes:
1. Consult Tyco Electronics for non-standard cable lengths.
Cable length tolerance:
Length A
Centerline to Cable End
2.1
[.081]
Length A Tolerances.
5.3
[.208]
Ref.
Ref.
Length A
Tolerance
50 To 100 [3.94]
± 3 [± .12]
101 To 500 [3.98 to 19.69] ± 5 [± .20]
Over 500 [19.69] ± 10 [± .39]
2. To avoid damaging the cable, minimize time at temperature
while soldering and/or applying heat to unterminated end of
cable.
1.3
[.052]
SSMT Jack
Ref. Cable
2.5 Dia.
[.100] Ref.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
215
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SSMT Surface Mount Interconnect System (Continued)
Inter-Series Cable
Assemblies
Notes:
1. Consult Tyco Electronics for non-standard cable lengths:
Length A Tolerances.
Length A
50 To 100 (3.94)
Tolerance
± 3 (± .12)
101 To 500 (3.98 to 19.69) ± 5 (± .20)
Over 500 (19.69) ± 10 (± .39)
2. Connectors are randomly aligned unless otherwise noted.
SMA Straight Plug
3.4
[.132]
Length A
Reference Plane to Centerline
19.2
Ref.
Ref.
Assembly Length (A)
100 [4.0]
Part No.
1064543-1
1064552-1
1064560-1
Ref.
1.3 Dia. Ref.
[.052] Cable
2.1
[.081]
200 [8.0]
[.757]
305 [12.0]
SSMT Right
Angle Jack
Note:
1064552-1 recommended for customer
system verification.
2.5
[.100]
Dia. Ref.
SMA Bulkhead Jack
3.4
[.132]
Ref.
Ref.
Length A
Reference Plane to Centerline
21.3
[.839]
1.3
[.052]
Dia. Ref.
Cable
5.4 Dia.
[.250] Min.
Ref.
Assembly Length (A)
100 [4.0]
Part No.
1064544-1
1064553-1
1064561-1
2.1
[.081]
200 [8.0]
305 [12.0]
6.0
[.235]
Min.
2.5
[.100]
Dia. Ref.
7.9
[.312]
Hex.
SSMT Right
Angle Jack
Recommended
Mounting Hole
3.2 Max. Panel
[.125] Thickness
SMB Bulkhead Jack
3.4
[.132]
Ref.
Length A
Reference Plane to Centerline
17.1
[.675]
Ref.
1.3
Assembly Length (A)
100 [4.0]
Part No.
1064546-1
1064555-1
1064563-1
7.4
[.290]
[.052]
Dia. Ref.
Cable
4.9 Dia.
[.192] Min.
.1
81]
2.1
[.081]
Ref.
Ref.
200 [8.0]
305 [12.0]
4.4
2.5
[.100]
Dia. Ref.
7.9
[.312]
[.172]
[
Min.
Hex.
6.4
[.250]
Hex.
t
Recommended
2.4 Max. Panel
SSMT Right
k
Mounting Hole
[.093] Thickness
Angle Jack
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
216
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SSMT Surface Mount Interconnect System (Continued)
Inter-Series Cable
Assemblies (Continued)
MCX Bulkhead Jack
Length A
3.4
Ref.
Reference Plane to Centerline
[.132]
1.3
[.052]
Dia. Ref.
Cable
16.8
[.662]
4.8
[.189]
Ref.
4.9 Dia.
[.192] Min.
Dia.
2.1
1
Assembly Length (A)
100 [4.0]
Part No.
1064549-1
1064558-1
1064566-1
Ref.
Ref.
[.081]
1]
200 [8.0]
305 [12.0]
2.5
[.100]
4.5
Min.
6.4
[.250]
Hex.
Dia. Ref.
6.4
[.250]
Max. Panel
Thickness
[.177]
SSMT Right
Angle Jack
R
Recommended
Mounting Hole
11.4
[.447]
MCX Right-Angle Plug
3.4
[.132]
Length A
Centerline to Centerline
Ref.
Assembly Length (A)
100 [4.0]
Part No.
1064550-1
1064559-1
1064567-1
1.3
[.052]
Dia. Ref.
Cable
12.7
[.500]
Ref.
6.1
[.241]
2.1
[.081]
Ref.
200 [8.0]
305 [12.0]
SSMT Right
Angle Jack
7.9
[.312]
2.5
[.100]
Dia. Ref.
101.6
[4.00]
Ref.
SSMT Disengagement Tool
Part No.
1221286-1
SLIDE
LIFT
HORIZONTAL
TO ENGAGE
TOOL
VERTICAL
TO
DISENGAGE
CONNECTOR
PRESS VERTICAL
TO ENGAGE
CONNECTOR
OPTIONAL
Use of Engagement/Disengagement Tool
Note: The SSMT disengagement tool can be utilized as an optional engagement tool versus manual hand installation.
SSMT to SMA Between Series
Adapters
SSMT Jack to SMA Jack Adapter
SSMT Jack to SMA Plug
SSMT Plug to SMA Jack Adapter
SSMT Plug to SMA Plug Adapter
13.7
[.538]
16.2
[.639]
Ref.
5.5
[.218]
5.5
[.218]
Ref.
Across Flats
Across Flats
SMA
SMA
SSMT Jack
Jack
SSMT Plug
Jack
SMA
Plug
SMA
Plug
SSMT
Jack
SSMT
Plug
12.9
[.508]
10.5
[.413]
Ref.
Ref.
Part No. 1055696-1
Part No. 1055695-1
Part No. 1055694-1
Part No. 1055697-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
217
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
MMCX Microminiature Snap-On Connector Series
Material and Finish
Product Facts
Shells — Brass
Bodies — Brass , plated gold
■ Snap-on interface facilitates
assembly
Center Contacts —
(Male) — Brass, plated gold
(Female) — Beryllium Copper, plated
gold
■ 35% smaller than MCX
Series
■ Designed for space saving
applications up to 6 GHz
Dielectrics — PTFE
■ Conforms to CECC
Specifications
Electrical Characteristics in
accordance with CECC 22000
Frequency — dc – 6 GHz
Nominal Impedance — 50 ohms
■ Surface mount tape and reel
for high volume
Voltage Rating — 170 Volts
(VRMS Max.) @ Sea Level
VSWR — 1.25 : 1 Max. @ 6 GHz
Insulation Resistance —
1,000 Megohms Min.
Dielectric Withstanding Voltage —
500 Volts (VRMS Max.) @ Sea Level
RF Leakage — -60 dB Min.
@ 2.5 GHz
Contact Resistance —
Center Contact — 5 milliohms max.
Outer Contact — 1 milliohm max.
Tyco Electronics’ micro-
well as to prevent damage
to PCB solder connections.
configurations, including
PCB and panel mount, flexi-
ble and semi-rigid cable.
Tape and reel packaging is
available on surface mount
product to facilitate high vol-
ume manufacturing. Other
options can be reviewed
as well, including additional
cable sizes, and adapters.
miniature snap-on connec-
tors offer an excellent blend MMCX connectors are
of size, durability and
designed for broadband
performance, DC-6 GHz,
and can be utilized for
future system upgrades
performance for emerging
applications in GPS, PCS,
automotive and wireless
communications. An exten- without concerns for per-
Mechanical Characteristics in
accordance with CECC 22000
sion of the popular MCX
series, MMCX connectors
are 35% smaller, offering
even greater packaging
density and weight reduc-
formance degradation.
The non-slotted outer con-
tact provides for minimal
RF leakage. MMCX surface
mount connectors are
Connector Durability —
500 mating cycles
Force to Engage — 18 Newtons Max.
Force to Disengage —
6 Newtons Max.
Center Contact Retention —
10 Newtons Min.
The MMCX connector series
is a cost effective solution
for the challenging demands
of today’s commercial mar-
ketplace. It offers one of the
smallest conventional crimp
tion. MMCX connectors are designed to withstand
rated to 500 mating cycles. infrared reflow, convection
The snap-on interface facili- and vapor phase soldering.
tates assembly, eliminating
the need for a threaded
connection, and ensuring
full engagement. The
forces to engage and disen-
gage have been optimized
to ensure ease of mating as
Tyco Electronics MMCX con- terminations without special
Cable Retention —
Axial — 45 Newtons Min.
Rotational — 0.05 N-m Min.
nectors are fully mateable
with competitive MMCX
tooling. Call your local sales
office or authorized distribu-
product and conforms to the tor for additional information
Environmental Characteristics
in accordance with CECC 22000,
Equivalent Test Conditions
CECC interface specifica-
tions. They are available in
a broad range of standard
or samples of the MMCX
connector series.
Temperature Rating —
–55 to +155°C
Vibration — MIL-STD-202, Method
204, Condition B
Shock — MIL-STD-202, Method 213,
Condition A
Moisture Resistance —
MIL-STD-202, Method 106
16.62
[.655]
Thermal Shock — MIL-STD-202,
Method 107, Condition B
Ref.
Note: Performance specifications
are typical, but may not apply to all
connector types.
8.80
[.347]
Ref.
Related Product Data
Product Specification — 108-2084
Sample Kit — 1654779
MMCX
SMB
218
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
MMCX Microminiature Snap-On Connector Series (Continued)
MMCX Interface Dimensions
Plug
Jack
2.6
[0.10]
2.7
[0.11]
3.5
[0.14]
Min.
Min.
1.05
[0.04]
0.25
[0.01]
Max.
0.7
[0.03]
Ref.
1.6
2.4
2.41
[0.09]
Max.
Min.
[0.06] [0.09]
0.4
[0.02]
1.45
[0.06]
Min.
Reference Plane
Reference Plane
Semi-Rigid Cable – Direct Solder Attachment
Straight Cable Plug
Right-Angle Cable Plug
Ø 3.5
[0.14]
7.0
[0.28]
3.5
Cable
Part No.
[0.14]
4.0
[0.16]
RG 405
1408313-1
5.3
[0.21]
Cable
Part No.
RG 405
1408314-1
11.5
[0.45]
6.5
[0.25]
Flexible Cable – Crimp Attachment
Straight Cable Plugs
Right-Angle Cable Plug
Ø 3.5
[0.14]
7.0
[0.28]
3.5
Cable
Part No.
Cable
Part No.
[0.14]
RG 178, 196
1408149-1
RG 178, 196
1408148-1
4.0
[0.16]
5.3
[0.21]
RG 174, 188, 316 1408149-2
RD 316 1408149-3
Captured Center Contact
Captured Center Contact
11.5
[0.45]
11.9
[0.47]
Ø 3.8
[0.15]
Cable
Part No.
RG 174,
188, 316
1408312-1
1408312-2
RD 316
15.9
[0.63]
Captured Center Contact
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
219
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
MMCX Microminiature Snap-On Connector Series (Continued)
Printed Circuit Board
Straight Jack Receptacle
1.27
[.050]
Typ.
Ø 0.82
[.032]
3.5
[0.14]
2.6
[0.10]
Reference Plane
Part No.
2.54
[.100]
Typ.
1408150-1
Ø 0.7
4.5
3.5
[0.03]
[0.18]
[0.14]
Recommended Mounting Holes
7.5
[0.30]
Reference Plane
Right-Angle Jack Receptacle
1.27
[.050]
Typ.
Ø 0.82
[.032]
6.5
[.256]
4.75
Part No.
2.54
[.100]
[.187]
2.6
[.102]
3.8
[.150]
Typ.
1408151-1
Recommended Mounting Holes
6.8
[.268]
Ø 0.7
[.028]
3.5
[.138]
2.80
[.110]
Straight Plug Receptacle
1.27
[.050]
Typ.
Ø 0.82
[.032]
4.50
[.177]
Part No.
7.50
[.296]
2.54
[.100]
Typ.
1408496-1
Recommended Mounting Holes
Ø 0.70
[.028]
3.50
[.138]
Surface Mount
Straight Jack Receptacle
5.0
[0.20]
2.6
[0.10]
0.8
[.031]
2.1
[.083]
Part No.
1.6
5.0
[0.20]
[.063]
1393757-6
1.4
[.055]
PC Board
1.4
[.055]
5.6
[0.22]
Right-Angle Jack Receptacle
5.0
[0.20]
Ground Pad
Typ.
2.6
[0.10]
Signal Pad
Part No.
5.0
[0.20]
Recommended Mounting Pattern
1393757-7
PC Board
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
220
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
MMCX Microminiature Snap-On Connector Series (Continued)
Edge Mount
Straight Jack Receptacle
2.8
[.110]
Part No.
3.5
1408152-1
[.138]
3.4
[.134]
3.50
[.138]
Ground Pad Typ.
Signal Pad
4.50
[.177]
7.45
[.293]
7.40
4.60
[.181]
[.291]
1.10
1.95
[.043]
[.077]
4.50
[.177]
2.20
[.087]
Ø 0.70
[.027]
7.50
[.296]
2.80
[.110]
Solder Pad Configuration Only
Straight Plug Receptacle
4.50
[.177]
1.40
[.055]
Part No.
1408120-1
3.50
[.138]
3.40
[.134]
2.70
[.106]
3.50
[.138]
Ground Pad Typ.
Signal Pad
4.50
[.177]
7.45
[.293]
4.60
[.181]
7.40
[.291]
1.10
1.95
[.043]
[.077]
4.50
[.177]
2.20
[.087]
Ø 0.70
[.027]
7.50
[.296]
2.80
[.110]
Solder Pad Configuration Only
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
221
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
UMCC — Ultraminiature Coax Connector and Cable Assembly Series
Product Facts
■ Ultra low profile (2.0 mm or
2.5 mm maximum mated
height)
■ Easy snap on/off mating
■ Small footprint on PCB
(3 mm x 3 mm)
■ Excellent performance to
6 GHz
■ Surface mount and reflow
solderable
■ Available on 0.80 mm and
1.37 mm dia. single shield,
and 1.32 mm dia. double
shield cable
■ Style A receptacles mate
with HIROSE U.FL/U.FL(v)
Series connectors
Description
Electrical Characteristics
Mechanical and Environmental
Characteristics
■ Style B receptacles mate
with MURATA GSC Series
connectors
Characteristic Impedance —
50 Ohms
Frequency Range — DC to 6 GHz
VSWR (mated pair) —
1.30 max. DC to 3 GHz
1.40 max. 3 to 6 GHz (cable dependent)
Insertion Loss (connectors only) —
0.24 dB max. DC to 6 GHz
Rated Voltage —
60 VAC (rms) — standard receptacle
(Styles A, B)
■ Extremely low profile
Durability —
30 cycles — standard receptacle
(Styles A, B)
Disengagement Force —
2N min. perpendicular
4N min. orthogonal
Center Contact Retention Force —
0.15N min.
Tape/Reel Packaging (receptacle) —
12 mm carrier per EIA-481
■ Surface mount
technology
■ 360° mated rotation
■ Excellent price-to-
performance ratio
Applications
■ Wireless LAN, Mini PCI
■ Mobile Antenna/GPS/
Radio Systems
Operating Temperature —
–40°C to +90°C
Dielectric Withstanding Voltage —
200 VAC, 50 Hz for 1 min. @ sea level
Insulation Resistance —
■ PDA/PCS/Cellular
Material and Finish
500 Megohms min.
Handset applications
Contact Resistance (connectors
only) —
20 milliohms max. (Center)
10 milliohms max. (Outer, Plug)
10 milliohms max. (Outer, Receptacle)
Shell — Phosphor bronze, plated gold
or silver
Male Center Contact — Brass or
phosphor bronze, plated gold
Female Center Contact — Brass or
phosphor bronze, plated gold
■ Wireless Communications
systems (LAN, GSM,
PCS, WCDMA, UMTS)
■ Remote measuring
equipment
Insulator (Plug) — PBT (15% G.F.),
black, UL94V-0
Insulator (Receptacle) — LCP,
beige or black, UL94V-0
Related Product Data
Product Specification — 108-2231
Sample Kit — 1-1773441-6
HIROSE is a trademark of Hirose Electric.
MURATA is a trademark of Murata
Electronics, Inc.
222
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
specified. Values in brackets
are standard equivalents.
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
UMCC — Ultraminiature Coax Connector and Cable Assembly Series (Continued)
Shield Coverage —
0.8 mm Dia. — > 90%
1.32 mm Dia. — > 90% (each braid
layer)
1.37 mm Dia. — > 90%
Jacket —
0.8 mm Dia. — FEP or PFA
1.32 mm Dia. — FEP
1.37 mm Dia. — FEP
Material and Finish
Center Conductor —
0.8 mm Dia. — Silver plated copper
1.32 mm Dia. — Silver plated copper
1.37 mm Dia. — Silver plated copper
Electrical Characteristics
Cable Information
Impedance (Ohms) —
0.8 mm Dia. — 50
1.32 mm Dia. — 50
1.37 mm Dia. — 50
2
2
2
Center Conductor Size —
Velocity of Propagation —
0.8 mm Dia. — 70%
1.32 mm Dia. — 70%
1.37 mm Dia. — 70%
CC Resistance (Ohms/KM) —
0.8 mm Dia. — 1450
1.32 mm Dia. — 560
0.8 mm Dia. — Stranded 7/0.05 mm
1.32 mm Dia. — Stranded 7/0.08 mm
1.37 mm Dia. — Stranded 7/0.10 mm
Jacket Size —
Dielectric —
0.8 mm Dia. — 0.80 mm OD
1.32 mm Dia. — 1.32 mm OD
1.37 mm Dia. — 1.37 mm OD
0.8 mm Dia. — FEP or PFA
1.32 mm Dia. — FEP
1.37 mm Dia. — FEP
1.37 mm Dia. — 354
Dielectric Size —
Voltage Rating —
Mechanical Characteristics
0.8 mm Dia. — 0.4 mm OD
1.32 mm Dia. — 0.66 mm OD
1.37 mm Dia. — 0.83 mm OD
0.8 mm Dia. — 60 VAC
1.32 mm Dia. — 60 VAC
1.37 mm Dia. — 60 VAC
Minimum Bend Radius —
0.8 mm Dia. — 5 mm single bend,
30 mm continuous flexing
1.32 mm Dia. — 5 mm single bend,
30 mm continuous flexing
1.37 mm Dia. — 5 mm single bend,
30 mm continuous flexing
Shield —
0.8 mm Dia. — Silver plated copper
braid
1.32 mm Dia. — Double SPL braid
1.37 mm Dia. — Silver plated copper
braid
Attenuation — See chart
Dielectric
Jacket
Center
Conductor
Braided
Shield
UMCC Cable Attenuation
Frequency (GHz)
0.0
1.0
2.0
3.0
4.0
5.0
6.0
0
-1
-2
-3
1.37 mm OD
-4
1.32 mm OD
0.80 mm OD
-5
-6
-7
-8
-9
-10
223
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
UMCC — Ultraminiature Coax Connector and Cable Assembly Series (Continued)
PCB Receptacles —
Style A
H Max.
Receptacle
Printed
Circuit Board
Mates with UMCC
Connector Type
Mated Height
(H)
Style
Description
Part Number
1566230-1
1566230-2
2.00–2.50
.079–.098
A
A
II / III
II / III
UMCC PCB Receptacle, 2500 Pc Reel
UMCC PCB Receptacle, 500 Pc Bag
2.00–2.50
.079–.098
2.6
[.102]
UMCC PCB Receptacle
0.25
[.010]
1.8
[.071]
1.0
Ref.
[.039]
1.05
[.041]
Ref.
2.2
Ref.
[.087]
2.6
Ø 2.0
3.0
[.102]
[.079]
[.118]
1.0
[.039]
Ref.
1.9
Ref.
[.075]
4.0
0.6
[.024]
2.1
[.083]
[.157]
Ref.
0.35
[.014]
1.25
Cut Out Prohibition Area
[.049]
Recommended PC Board Layout
PCB Receptacles —
Style B
H Max.
Receptacle
Printed
Circuit Board
Mates with UMCC
Connector Type
Mated Height
(H)
Style
Description
Part Number
2.00
B
B
I
I
UMCC PCB Receptacle, 2500 Pc Reel
UMCC PCB Receptacle, 500 Pc Bag
1775146-1
1775146-2
.079
2.00
.079
2.6
[.102]
UMCC PCB Receptacle
0.25
[.010]
1.8
[.071]
1.0
Ref.
[.039]
1.05
[.041]
Ref.
2.2
Ref.
[.087]
2.6
[.102]
Ø 2.1
[.083]
3.0
[.118]
1.00
[.039]
Ref.
1.9
Ref.
[.075]
4.0
0.6
[.023]
2.1
[.083]
0.35
[.014]
[.157]
Ref.
1.15
[.045]
Cut Out Prohibition Area
Recommended PC Board Layout
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
224
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
UMCC — Ultraminiature Coax Connector and Cable Assembly Series (Continued)
Standard Double Ended
Cable Assemblies
H Max.
Receptacle
Printed
Circuit Board
UMCC Connector
Type
Mated Height
(H)
Length
L
Mates with
PCB Rcpt.
Cable Dia.
Part Number
1750109-1
1750109-2
1750108-1
1750108-2
1750107-1
1750107-2
1750107-3
1750107-4
1750107-5
1750107-6
2.00
.079
0.80
.031
100.00
3.937
Style B
Style B
Style A
Style A
Style A
Style A
Style A
Style A
Style A
Style A
I
2.00
.079
0.80
.031
200.00
7.874
2.00
.079
0.80
.031
100.00
3.937
II
2.00
.079
0.80
.031
200.00
7.874
2.50
.098
0.80
.031
100.00
3.937
2.50
.098
0.80
.031
200.00
7.874
2.50
.098
1.32
.052
100.00
3.937
III
2.50
.098
1.32
.052
200.00
7.874
2.50
.098
1.37
.054
100.00
3.937
2.50
.098
1.37
.054
200.00
7.874
L
4.0
Ref.
[.157]
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
225
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
UMCC — Ultraminiature Coax Connector and Cable Assembly Series (Continued)
Interseries Cable
Assemblies
UMCC Connector
Type
Mated Height
(H)
Cable Dia.
Length
Description
Part Number
1750110-2
1750110-4
1750110-6
1750110-8
1-1750110-0
1750110-7
1750110-9
2.50
.098
1.37
.054
200.00
7.874
UMCC Plug to
FME Plug
2.50
.098
1.37
.054
200.00
7.874
UMCC Plug to
SMA Plug
2.50
.098
1.37
.054
200.00
7.874
UMCC Plug to
SMA Bulkhead Jack
III
2.50
.098
1.37
.054
200.00
7.874
UMCC Plug to
MCX Right-Angle Plug
2.50
.098
1.37
.054
200.00
7.874
UMCC Plug to
MMCX Right-Angle Plug
2.00
.079
0.80
.031
200.00
7.874
UMCC Plug to
MCX Right-Angle Plug
II
2.00
.079
0.80
.031
200.00
7.874
UMCC Plug to
MMCX Right-Angle Plug
UMCC to FME Plug
UMCC to SMA Plug
200.0
[7.874]
20.0
[.787]
Ref.
200.0
[7.874]
20.0
Ref.
[.787]
UMCC to SMA Bulkhead Jack
200.0
[7.874]
20.0
[.787]
Ref.
UMCC to MCX Right-Angle
Plug
200.0
[7.874]
20.0
[.787]
Ref.
UMCC to MMCX Right-Angle
Plug
200.0
[7.874]
20.0
[.787]
Ref.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
226
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
UMCC — Ultraminiature Coax Connector and Cable Assembly Series (Continued)
Adapters
UMCC Connector
Description
Part Number
Type
UMCC Jack Receptacle to
SMA Plug
1775228-1
1775229-1
1775227-1
1775230-1
I
UMCC Plug to SMA Jack
UMCC Jack Receptacle to
SMA Plug
II / III
UMCC Plug to SMA Jack
10.60
10.60
[.417]
[.417]
8.0
[.315]
8.0
[.315]
Hex.
Hex.
1.10
1.10
[.043]
[.043]
Ø 2.00
[.078]
Ø 1.90
[.074]
Part Number 1775228-1
Part Number 1775227-1
14.0
[.551]
14.0
[.551]
5.6
[.220]
5.6
[.220]
10.0
10.0
[.393]
[.393]
Ø 5.3
[.208]
Ø 6.25
[.246]
Ø 5.3
[.208]
Ø 6.25
[.246]
Ø 2.6
Ø 2.5
[.102]
[.098]
1/4-36UNS
1/4-36UNS
Part Number 1775229-1
Part Number 1775230-1
Extraction Tool
Part Number 1775231-1
4.50
[.177]
100
[3.937]
30.00
[1.181]
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
227
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
UMCC — Ultraminiature Coax Connector and Cable Assembly Series (Continued)
Application Notes
Pulling Tool
Mating/Unmating —
Cable Plugs
RF Coax Cable
2N Max.
Step 1
Step 2
4N Max.
2N Max.
Receptacle
Printed Circuit Board
Mating/Unmating
Permissible Load
1. To mate the connectors,
insert the cable plug into
the SMT receptacle, mak-
ing sure the cable plug
is as vertical as possible
and the mating axis of
both connectors are
Do not apply excessive
load to the cable after the
connectors are mated.
Please refer to the permissi-
ble loads indicated in the
figure to the right.
2. To unmate the connectors,
insert the end portion of
the extraction tool under
the SMT receptacle con-
nector flanges and pull off
vertically in the direction
of the mating axis.
aligned. Do not insert on
an extreme angle.
Tape and Reel Packaging
Specifications
Ø 1.50
[.059]
Standard Receptacles
± 0.1
± 0.1
2.0
[.079
4.0
[.157
0.30
[.012]
1.75
[.069]
± .004
± .004
]
]
Center
1.40
Ø 330
[.055]
Contact
[12.99]
5.5
[.217]
12.0
[.472]
Ø 13.0
[.512]
1.60
[.063]
8.0
[.315]
Dimensions of Taping
Dimensions Reel (2500 Pieces/Reel)
Soldering Profile —
SMT Receptacle
Heating peak
240°C – 3 seconds
Hand Soldering (Reference only)
Recommended Temperature
Profile (Reference)
(°C)
1. Soldering iron: The
maximum temperature
is 240°C.
260
240
220
200
180
160
140
120
100
80
1. The preferred technique
for mounting the SMT
Receptacle package is to
reflow solder the device
onto a PCB (Printed
Circuit Board).
Preheating 183°C
(130 to 165°C)
2. Soldering period: within
5 seconds.
40 to 50
seconds
Within 2 minutes
2. The maximum temperature
for the lead of PCB surface
does not exceed 240°C.
TIME
3. The right reflow soldering
profile is for reference and
will modify under individ-
ual different conditions.
228
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
COAXICON Series Mobile Phone Switching Coax Connectors
Product Facts
■ Able to switch RF signal
from internal to external
antenna
■ SMD component for
standard pick & place
■ Up to 2.4 GHz
■ Up to 30,000 life cycles
■ High radial and axial
tolerance capture
■ Low insertion loss
■ Right-angle cable plug with
floating for alignment
tolerance capture
■ Application in handsets
The Tyco Electronics SMD
mobile phone connector
system offers a low-cost
and effective solution to
passive switching between
an internal and external
phone antenna. When
implemented in a cradle kit,
the connector helps to
make possible hands-free
operation of the mobile
phone within a vehicle,
enhancing safety and per-
mitting compliance with a
growing body of legislation.
Connection to the external
antenna also enhances
signal gain and clarity.
phone and cradle, which is
extremely important when
blindmating is necessary.
The Tyco Electronics switch-
ing coax connector system
meets all performance
objectives, including up to
30,000 connect/disconnect
and switching cycles over
the connector’s life.
Product Specification
108-71000
Technical Features
Impedance — 50 Ohms
Operating Temperature —
–40°C to +85°C
Radial Tolerance Capture —
1.0 ꢀ.039ꢁ (except for 3.5 ꢀ.138ꢁ height)
Axial Tolerance Capture — 0.6 ꢀ.024ꢁ
The connector design
accommodates gross mis-
alignment between the
Plating — Outer shell and center
contact are gold plated
Short Stamped Contact —
Selective gold plating
Long Stamp Contact (switch) —
Full gold plating with ink barrier
Insertion Loss — 0.30 dB max.
at 2 GHz
Isolation — 26 dB min. at 2 GHz
VSWR — 1.15:1 at 1 GHz, below
1.20:1 at 2 GHz
Mated Insertion Loss (after life
cycle testing) — Below 0.30 dB at
1 GHz, below 0.45 dB at 2 GHz
Unmated Insertion Loss (after life
cycle testing) — Below 0.20 dB at
1 GHz, below 0.35 dB at 2 GHz
Packaging on reels for SMD.
For more details, refer to the product
specification.
Figure 1 — System Configuration
Figure 2 — System Configuration
229
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
COAXICON Series Mobile Phone Switching Coax Connectors (Continued)
Right-Angle Cable Plugs
L1
L2
A
F
D
Note: Hex Crimp Dim. 3.25 [.128]
Dimensions
RG/U
Cable
Single Packed
Part No.
Bulk Packed
Part No.
A
D
F
L1
L2
3.4
6.9
15.6
10.9
5x5 Square
619028-2
619028-4
619041-2
619041-4
619078-1
619078-2
5-619028-2
5-619028-4
5-619041-2
5-619041-4
5-619078-3
5-619078-4
.134
.272
.614
.429
3.4
.134
9.6
.378
15.6
.614
10.9
.429
5x5 Square
6.0
.236
3.4
.134
6.9
.272
15.8
.622
10.9
.429
RG 174
6.0
.236
3.4
.134
9.6
.378
15.8
.622
10.9
.429
6.0
.236
3.4
.134
6.9
.272
20.3
.799
11.0
.433
6.0
.236
3.4
.134
9.6
.378
20.3
.799
11.0
.433
SMD Switching Jacks
D
H
l
L
Dimensions
L
Diameter
D
Part No.
H
l
6.0
8.0
3.2
5.4
619061-1
619062-1
619072-1
.236
.315
.126
.213
4.5
.177
8.0
.315
3.2
.126
5.4
.213
3.5
.137
8.0
.315
3.2
.126
5.4
.213
Other models upon request.
For all dimensions, stencil and PCB recommended layout, see customer
drawing.
*Dim. l is the width of the connector on the PCB.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
230
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
COAXICON Series Mobile Phone Switching Coax Connectors (Continued)
Switching SMD Jack
Low Profile
Part Number 619061-1,
Part Number 619062-1, and
Part Number 619072-1
± 0.25
2.70
[.106
Ø 5.00
[.197]
± .010
]
± 0.08
± .003
0.42
[.017
± 0.10
± .004
2.10
[.083
]
]
Ø 5.10
[.201]
± 0.10
± .004
± 0.10
± .004
3.10
[.122
2.40
[.094
]
]
± 0.05
± .002
0.80
[.031
Detail X
Detail Y
]
± 0.10
± 0.10
± .004
]
3.80
[.150
3.20
[.126
± .004
]
± 0.10
± .004
± 0.10
± .004
]
4.30
[.169
3.70
[.146
]
± 0.20
8.00
[.315
± .008
]
Ø 5.40
[.213]
+ 0.00
– 0.05
+ .000
Ø 3.40
Ø 0.60
[.024]
[.134
]
– .002
A
A
Center Contact
Dielectric
Outer Shell
Second
1.70
[.067]
A
Signal
Contact
Spring
± 0.020
0.10
[.004
± 0.07
± .003
0.20
[.008
Y
± .0008
]
]
Section A-A
± 0.05
± .002
3.10
[.122
± 0.10
± .004
2.70
[.106
]
]
Area Without
Trace
Ground
Ground With
± 0.10
2.40
[.094
Solder Stop Mask
± .004
]
Signal With
Solder Stop Mask
± 0.05
± .002
0.90
[.035
Signal
]
+ 0.10
R 1.50
± 0.05
± .002
– 0.00
+ .004
– .000
R 2.70
[.106
]
[.059
]
± 0.05
± 0.05
± .002
]
3.65
[.144
3.05
[.120
± .002
]
+ 0.080
– 0.070
+ .0031
– .0028
+ 0.080
4.58
3.97
– 0.070
+ .0031
]
– .0028
[.180
]
[.156
Recommended PCB Layout
Plating
Dim. A
Part No.
619061-1
6.00 ± 0.10
.236 ± .004
Gold
Gold
Gold
4.50 ± 0.10
.177 ± .004
619062-1
619072-1
3.50 ± 0.10
.138 ± .004
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
231
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
COAXICON Series Mobile Phone Switching Coax Connectors (Continued)
Switching SMD Jack
ESD Protected
Part Number 619133-3
Plating — Gold
2.35
[.093]
Max.
R 1.40
[.055]
± 0.30
3.20
[.126]
2.45 4.60
[.096] [.181
± .012
]
± 0.10
± .004
Ø 5.40
[.213
]
0.80
[.031]
A
Center
Contact
Dielectric
Spring
± 0.10
± .004
6.30
[.248
Outer Shell
1.64
[.065]
]
Second
Signal
Spring
Contact
0.50
[.020]
± 0.25
3.70
[.146
± 0.10
± .004
7.00
[.276]
± .010
0.25
[.010
]
]
8.00
A
[.315]
Section A-A
+ 0.05
3.10
– 0.00
+ .002
– .000
± 0.10
± .004
2.70
[.106
[.122
]
]
Area Without
Track
Ground
Ground With
± 0.10
2.40
[.094
Solder Stop Mask
Signal With
± .004
]
Solder Stop Mask
± 0.05
± .002
0.90
[.035
Signal
]
+ 0.10
+ 0.05
– 0.00
+ .002
– .000
R 1.50
R 2.70
[.106
– 0.00
+ .004
– .000
[.059
]
]
± 0.05
± 0.05
± .002
]
3.65
[.144
3.05
[.120
± .002
]
+ 0.080
– 0.070
+ .0031
– .0028
+ 0.080
4.58
3.97
– 0.070
+ .0031
]
– .0028
[.180
]
[.156
Recommended PCB Layout
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
232
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
COAXICON Series Mobile Phone Switching Coax Connectors (Continued)
Switching SMD Jack
ESD Protected
4.1mm Height
5.00
[.197]
0.80
[.031]
1.50
[.059]
± 0.20
± .008
Part Number 619201-1*
Ø 5.80
[.228
]
1.60
[.063]
± 0.20
Ø 4.40
± .008
]
Plating — Gold
[.173
0.70
[.028]
1.00
[.039]
45°
2.50
[.098]
Ø 4.35
[.171]
+ 0.15
1.00
– 0.10
+ .006
– .004
[.039
]
Ø 6.20
[.244]
0.70
[.028]
4 Plcs.
+ 0.00
– 0.05
+ .000
– .002
Ø 3.40
R 0.28
[.011]
Ø 0.56
[.022]
Ø 5.00
[.197]
[.134
]
Recommended PCB Layout
Center Contact
Outer Shell
1.07
[.042]
4.10
[.161]
3.45
[.136]
3.88
[.153]
1.80
[.071]
Dielectric
± 0.20
± .008
]
1.80
[.071
Spring Contact
Mated Position
Unmated Position
*Mirrored Version of Part Number 619201-1 Also Available Under Part Number 619231-1
Switching SMD Jack Mid
Part Number 619075-1
Plating — Gold
B
B
2.90
60°
[.114]
0.70
± 0.10
5.50
[.028]
± .004
[.217
]
0.40
[.016]
Sq.
1.90
[.075] 1.85
1.60
[.063]
Ø 4.20
[.165]
0.70
[.028]
Dielectric,
Plated
Ø 2.50
[.098]
0.80
[.031]
[.073]
± 0.10
± .004
Ø 5.00
[.197
0.40
[.016]
± 0.02
± .001
0.10
[.039
R 0.30
[.012]
]
38°
]
Dielectric,
Unplated
1.25
[.049]
3.50
[.138]
2.80
[.110]
± 0.05
0.50
[.020
R 1.75
[.069]
D
D
± .002
]
R 2.50
[.098]
± 0.10
R 0.20
[.008]
1.00
[.039]
Spring Contact
2.40
[.094
0.40
[.016]
0.20
[.008]
± .004
]
Section B-B
Section D-D
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
233
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
COAXICON Series Mobile Phone Switching Coax Connectors (Continued)
Micro Switching Coax
Connector
1.30
Contact Spring
[.051]
1.70
[.067]
0.70
[.028]
0.70
[.028]
Part Number 619196-1
3.20
[.126]
Ø 3.00
3.00
Input Signal
[.118]
[.118]
Output
Signal
Plating — Gold
Ø 1.70
[.067]
3.40
[.134]
1.54
[.061]
Ø 0.80
[.031]
A
A
Dielectric,
Plated
Ground
1.00
2.50
[.098]
Copper
Clearance
0.90
[.035]
Dielectric,
Unplated
[.039]
1.40
[.055]
Section A-A
0.80
[.031]
± 0.20
3.00
[.118
Recommended PCB Layout
± .008
]
1.80
[.071]
Right-Angle Cable Plug For
Micro Switching Coax
Connector Cable RG 316/
RG 174
2.00
[.079]
10.40
[.409]
Dielectric
Part Number 619211-2
Snap Spring
Shell Angle
5.10
[.201]
Center
Contact
Outer
Shell
Sq.
4.80
[.189]
Plating — Gold
Ø 3.00
[.118]
Ø 0.70 Ø 3.50
[.028] [.138]
Lid
Ferrule
7.00
8.10
2.20
[.276]
[.319]
[.087]
0.45
[.018]
Nano Switching Coax
Part Number 619213-1
± 0.05
± 0.05
± .002
]
1.25
[.049
3.00
[.118
± .002
]
Plating — Gold
0.60
[.024]
± 0.05
± 0.05
± .002
1.55
[.061
1.05
[.041
± 0.15
± .006
Ø 1.92
[.076
± .002
]
]
]
± 0.05
± .002
2.90
[.114]
2.65
[.104
]
± 0.15
1.70
[.067
± .006
]
± 0.05
1.25
± 0.05
± .002
± 0.15
± .006
0.55
[.022
2.70
[.106
± .002
[.049
]
]
]
± 0.05
± .002
0.30
[.012
]
Recommended PCB Layout
Ø 0.55
[.022]
1.45
[.057]
± 0.15
± .006
2.70
[.106
]
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
234
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
COAXICON Series Mobile Phone Switching Coax Connectors (Continued)
Protected Front Contact
Cable Plug
Ø 9.60
[.378]
3.40
[.134]
A
5.10
[.201]
Safety
Ring
Spring
Part Number 5-619028-1,
Part Number 5-619078-1,
and Part Number 5-619137-1
Dielectric
Ø 9.60
[.378]
Plating
Dim. A
Part No.
7.35
[.289]
10.92
.430
Gold
5-619028-1
Center
Contact
Outer
Shell
14.90
Gold
5-619078-1
.587
Lid
Spring Support
Washer
10.92
.430
Gold
*5-619137-1*
Shell Angle
Ferrule
Bulk packaging.
*Outer conductor without slot.
Protected Front Contact
Cable Plug With
15.60
[.614]
10.92
[.430]
6.62
Dielectric
Cylindrical Interface
± 0.25
5.00
[.197
± .010
]
+ 0.110
Part Number 5-619076-2
[.261]
Ø 2.50
– 0.010
+ .0043
– .0004
Safety
Ring
[.098
]
Plating — Gold
Bulk packaging.
5.10
[.201]
Ø 9.60
[.378]
7.35
[.289]
5.67
[.223]
Center
Contact
± 0.025
± .0010
]
Ø 3.50
[.138
Outer
Shell
Lid
Shell Angle
Spring
Spring Support
Washer
Ferrule
Cable Plug/
35.00
[1.378]
SMA Jack Adapter
22.00
[.866]
13.00
[.512]
7.00
[.276]
Part Number 619052-1
Safety Ring
6.62
Dielectric
[.261]
Dielectric
Center Contact
Plating — Gold
Ø 10.00
[.394]
Ø 3.40
[.134]
5.47
[.215]
Outer
Shell
Ø 6.50
[.256]
1/4" - 36 UNS-2A
Cable Plug/
SMA Jack Adapter
With Conical Flange
35.00
[1.378]
22.00
[.866]
13.00
[.512]
Ø 8.18
[.322]
7.00
6.62
[.261]
Safety Ring
Part Number 619068-1
[.276]
Dielectric
Dielectric
Center Contact
Plating — Gold
Ø 10.00
[.394]
Ø 3.40
[.134]
5.47
[.215]
Outer
Shell
Ø 6.50
[.256]
1/4" - 36 UNS-2A
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
235
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
COAXICON Series Mobile Phone Switching Coax Connectors (Continued)
35.00
[1.378]
Switching SMD Jack/
SMA Jack Adapter
22.00
[.866]
13.00
[.512]
7.00
[.276]
Part Number 619053-1
Dielectric
Outer Shell
Center Contact
Plating — Gold
Ø 10.00
[.394]
Ø 0.60
Ø 5.40
[.024]
[.213]
Ø 6.50
[.256]
1/4" - 36 UNS-2A
+ 0.020
Ø 3.40
– 0.080
+ .0008
– .0031
[.134
]
Adapter SMA Jack —
MSC Test Plug
+ 0.17
13.00
22.00
[.866]
– 0.12
+ .007
– .005
2.90
[.114]
[.512
]
7.00
[.276]
Dielectric
Center Contact
With Conical Flange
20°
Ø 8.18
[.322]
Dielectric
Part Number 619210-1
R 0.35
[.014]
Ø 10.00
[.394]
Plating — Gold
Ø 3.00
[.118]
Ø 0.70
[.028]
2.20
[.087]
Outer
Shell
11.40
[.449]
Ø 6.50
[.256]
1/4" - 36 UNS-2A
Adapter SMA Jack —
NSC Test Plug With
Two-Hole Flange
± 0.10
1.00
[.039
± .004
]
± 0.10
Ø 7.00
[.276
± .004
A
]
Flange
± 0.10
Ø 3.40
[.134
± 0.10
Ø 5.00
[.197
± 0.20
± .008
Part Number 619214-1
± .004
Ø 7.50
[.295
]
± .004
]
]
Outer
Shell
± 0.10
Ø 20.00
[.787
Center
Contact
Female
Plating — Gold
± .004
]
± 0.10
14.00
[.551
± .004
]
Dielectric
Center
Contact
Pin
Dielectric
± 0.20
8.70
[.343
± 0.10
6.00
[.236
± .008
]
± .004
]
A
± 0.20
18.70
[.736
+ 0.10
Ø 2.60
± .008
– 0.00
+ .004
– .000
]
± 0.10
± .004
[.102
]
± 0.30
± .012
8.00
[.314
28.20
[1.110
2 Plcs.
]
]
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
236
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Quick Snap Stripline (QSL) Coaxial Connector
Coaxial Cable
Displacement Interface
■ Low profile
■ Highly reliable ruggedized
interface
■ Surface mount technology
■ Excellent price-to-
performance ratio
■ Platform expandable to
include multi-port versions
and other customization
Specifications
Characteristic Impedance —
50 Ohms
10.00
[.394]
Max.
13.50
[.531]
Max.
Product Facts
■ Surface mount compatible
Frequency Range — Dc to 6 GHz
■ RoHS compliant (lead-free
SMT process [260° C]
compatible)
10.00
[.394]
VSWR — 1.3 Max to 3 GHz,
Max.
1.5 Max to 6 GHz
Rated Voltage — 60 VAC rms
Dielectric Withstanding Voltage —
■ PCI / PCI Express
Surface Mount Jack Receptacle
800 VAC, 50 Hz (at sea level)
compatible
Insulation Resistance —
100 Megohms min
Operating Temperature —
–40 to +125°C
Engagement Force — < 30 N
Disengagement Force — < 20 N
Cable Retention — 110 N
Durability — 250 cycles
■ Designed for RG 174 &
RG 316 Cable, and easily
adaptable to other cable
types
Part Number
1274794-1
■ Overall Height < 10 mm
■ Can be packaged to meet
IP67 Sealing
■ 10mm x 10.6mm max.
footprint (w/o panel
extension)
8.00
[.315]
Max.
24.00
[.945]
12.00
[.472]
Max.
■ Cost effective solution to
standard screw machine
RF connectors
RG-174
8.20
[.323]
Max.
Applications
■ PCI, Mini PCI, PCI Express
Cable Plug
■ Mobile Antenna/GPS/Radio
Systems/RFID
Part Number
1274795-1
■ PDA / PCS / Cellular
Handset applications
■ Wireless Communications
systems
■ Satellite Communications,
Broadcast, Multimedia
■ Automotive Telematics
Related Product Data
Product Specification — 108-2224
PCI, PCI EXPRESS are trademarks of
PCI SIG.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
237
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
DIN Inserts
Product Facts
■ Meets requirements of DIN
41626 and CECC 22330
■ Suitable for DIN 41612 Type
M Connectors (Eurocard),
Siedecon, and Z-PACK 2mm
HM Connectors
■ Meets DIN Performance
Level II
■ Crimp termination for inner
and outer conductors (cable
mount only) eliminates the
need for solder
■ Right-angle and vertical
style board mount pin and
socket contacts
■ Board mount product avail-
able with both solder and
compliant tails
■ Straight cable mount pin
and socket contacts for
RG 316, and RG 179 cable
■ Contact impedance of 50
and 75 ohms for cable
mount and 50 ohms for
board mount
Coaxial inserts according
density (pitch between adja-
cent contacts starting at 7.5
Technical Data
to CECC 22 330 and high-
Electrical and mechanical
characteristics of coaxial
inserts in accordance with DIN
41626 Part 2 and CECC 22 330
Characteristic Impedance —
50/75 Ω
Frequency Range — up to 2 GHz
Reflection Factor Up To 2 GHz 1
≤ 0.10
Insulation Resistance —
Initial value — ≥ 1 GΩ
After stressing — ≥ 200 MΩ
Screening Effectiveness — ≥ 70 dB
Inner Conductor Contact Resistance
After Stressing — ≤ 10 mΩ
current inserts (CECC spec- mm) and installation into the
ification under preparation)
can be used in conjunction
with a DIN 41612 style M
contact base (CECC 75
101-801), SIEDECON,
and Z-PACK 2mm HM
connectors.
contact base, by means of
a “snap-in” lock, make the
inserts particularly well
suited for applications.
Due to the centering,
—
– coaxial plugs are
installed in contact bases
with audio-frequency
(AF) female contacts
Coaxial inserts have a con-
tact system based on the
pin-socket principle with the
same dimensions as the
Series 1.0/2.3 coaxial con-
nectors and are plug-com-
patible. The product family
is represented by various
50Ω and 75Ω styles that can
be used far into the GHz
range. The high mounting
– coaxial jacks are
installed in contact bases
with AF male contacts.
The high-quality materials
used with coaxial inserts
ensure a high grade of
service even in an industrial
atmosphere.
Outer Conductor Continuity After
Stressing — ≤ 7.5 mΩ
Voltage Proof 2
—
Flexible Cables (RG 316)
At sea level — 750 V, 50 Hz
At 20 km altitude — 150 V, 50 Hz
Working Voltage 2
—
Flexible Cables (RG 316)
At sea level — 350 V, 50 Hz
At 20 km altitude — 65 V, 50 Hz
Service Life — 500 cycles
Climatic Category — 55/125/56
Notes
1 Guideline dimensions, depending
on cable type and connector style.
2 Some cable types suitable for use
with these connectors have lower
characteristic values than speci-
fied here.
238
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
specified. Values in brackets
are standard equivalents.
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
DIN Inserts (Continued)
Coaxial Inserts,
50 Ohm
Z-PACK 2mm
HM Connectors
Vertical PC Board Mount, Compliant
12.21
[.480]
–0.012
Ref.
4.15
[.163
–.0004
]
5.50
[.216]
Min.
90°0'
Typ.
5.10 Max.
[.200] Sq.
–0.03
4.75
[.187
+0.30
1.15
[.045
–.001
]
+.012
]
±0.05
±.002
1.00
[.039
Typ.
45°0'
Typ.
]
±0.05
5.08
[.200
±.002
]
Recommended
PC Board Layout
Right-Angle PC Board Mount, Compliant
17.75
[.700]
Ref.
6.10 Max.
[.240] Sq.
±0.10
90°0'
Typ.
7.00
[.275
–0.30
5.35
[.216
±.004
]
–.012
]
±0.05
±.002
1.00
[.039
Typ.
45°0'
Typ.
]
±0.05
+0.075
5.08
[.200
4.20
[.165
±.002
+.003
]
]
ꢀ 0.03
ꢁ 0.09
±0.10
4.00
[.157
4.75
±.004
]
ꢀ .001
ꢁ .004
Recommended
PC Board Layout
.187
Type
Housing Type
Application Tooling
Part No.
Vertical PCB Socket,
Compliant
Z-PACK 2mm
HM Male
5148385-1
904800-1
Rt. Angle PCB Pin,
Compliant
Z-PACK 2mm
HM Female
904805-1
904804-1 Support Anvil
5148386-1
Coaxial Insert Plug to SMA Jack
Coaxial Inserts to
SMA Adapters
± 0.12
± .005
7.92
[.312
]
Hex.
19.1
[.755]
Max.
Part No.
1274192-1
Coaxial Insert Socket to SMA Jack
7.92
[.312]
Hex.
Part No.
1274191-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
239
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
DIN Inserts (Continued)
Coaxial Inserts (50 Ω/75 Ω)
Bulkhead Cable Jack for
male connectors
Ø 5.8
[.228]
4.05
[.159]
Width Across Flats
of Hex Profile
Ø Max.
Cable Type
RG 316 (50 Ω)
RG 179 (75 Ω)
Part No.
1392020-1
3-1393668-4
2.6
.102
3.2
.126
2.67
.105
3.2
.126
9.6
[.378]
23.9
[.941]
Bulkhead Cable Jack for
female connectors
Ø 5.8
[.228]
Width Across Flats
of Hex Profile
4.75
[.187]
Ø Max.
Cable Type
RG 316 (50 Ω)
RG 179 (75 Ω)
Part No.
1392019-1
3-1393668-0
2.6
.102
3.2
.126
2.67
.105
3.2
.126
9.35
[.368]
23.9
[.941]
Right-Angle Bulkhead Jack for
male connectors
Width Across Flats
A
Dim A
Ø Max.
Cable Type
Part No.
Ø 6.0
[.236]
of Hex Profile
9.6
[.378]
2.6
.102
RG 316 (50 Ω )
RG 179 (75 Ω)
RG 179 (75 Ω)
RG 179 (75 Ω)
19
.748
3.2
.126
1-1393668-2
2.67
.105
22.4
.882
2.67
.105
3.2
.126
2-1393668-8
3-1393668-6
13.1
[.516]
24.0
.945
2.67
.105
3.2
.126
Right-Angle Bulkhead Plug for
female connectors
A
Width Across Flats
of Hex Profile
Ø 6.0
[.236]
Dim A
Ø Max.
Cable Type
RG 316 (50 Ω)
RG 316 (50 Ω)
RD 316 (50 Ω)
RG 179 (75 Ω)
Part No.
1393668-4
1393668-8
1393668-7
2-1393668-4
9.35
Ø 4.75
[.368]
[.187]
18.7
.736
2.6
.102
3.2
.126
22.3
.878
2.6
.102
3.2
.126
18.7
.736
3.0
.118
3.6
.142
13.1
[.516]
18.7
.736
2.67
.105
3.2
.126
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
240
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
DIN Inserts (Continued)
Coaxial Inserts (50 Ω/75 Ω) (Continued)
17.9
[.705]
Bulkhead Plug, PC Board
connection for DIN 41612 M
female connectors
9.35
[.368]
5.08
[.200]
Ø 4.75
[.187]
Part No.
1-1393662-0
Ø 1.0
[.039]
2.54
[0.10]
Pitch
Recommended
Mounting Hole
17.9
[.705]
Right-Angle Bulkhead Jack,
PC Board for DIN 41612 M
male connectors
3.0
[.118]
9.6
[.378]
4.05
[.159]
Part No.
1-1393662-4
6.9
[.272]
5.08
[.200]
17.8
[.701]
Right-Angle Bulkhead Plug,
PC Board for SIEDECON
female connectors
3.0
[.118]
9.35
[.368]
Ø 4.75
[.187]
Part No.
1-1393662-2
6.9
[.272]
5.08
[.200]
Ø 1.0
[.039]
2.54
[0.10]
Pitch
Recommended Mounting holes for
Part No. 1-1393662-2 and 1-1393662-4
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
241
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Size 8 Contacts
RF Crosstalk—90dB @ 5-500 MHz
Mating Force, Max. —4.0 lb
ꢀ17.8 Nꢁ
Unmating Force, Min. — 2.0 oz
ꢀ0.556 Nꢁ
Contact Retention —20 lb ꢀ89 Nꢁ
Contact Durability —500 cycles
Moisture Resistance—240 hours
per MIL-STD-1344, Method 1002,
Cond. II
Salt Fog —48 hours per MIL-STD-
1344, Method 1001, Cond. B
Material
Performance Characteristics
Frequency Range—0 to 500 MHz
Operating Voltage, Max. —
275 vac rms @ sea level
Termination Resistance, Max. —
Center Contact—6.0 milliohms
Outer Contact—3.0 milliohms
Insulation Resistance, Min. —
5,000 megohms @ 500 vdc
Brass — per QQ-B-626 and MIL-C-50
Phosphor Bronze — per QQ-B-750
Beryllium Copper — per QQ-C-530
TEFLON—per MIL-P-19468
Nylon—per MIL-M-20693
Extraction Tool Numbers
Subminiature D Housings —
58095-1 (AMPLIMITE)
Finish
Force
[N]
Cable
RG/U
Bright Tin Plating—per ASTM-B-571
Copper Plating — per MIL-C-14550
Gold Plating —per MIL-G-45204
Nickel Plating—per QQ-N-290
AMP-HDI Housings— 58095-2
lb
Dielectric Withstanding Voltage—
Sea Level—800 Volts rms
30,000 ft ꢀ9,144 mꢁ—525 volts rms
70,000 ft ꢀ21,336mꢁ—275 volts rms
316, 188, 174,
179, 179A, 179B
20
89
188-type
35
50
155.8
222.5
Double-Braid
VSWR to 500MHz, Max.
142, 142A, 142B
Pin/Socket
Straight/Straight
VSWR
1.30
Operating Temperature—
55°C to +125°C
Right-Angle/Straight
Right-Angle/Right-Angle
1.35
Thermal Shock —55°C to +125°C per
MIL-STD-1344, Method 1003, Cond. A
1.40
Physical Shock —50 G’s per MIL-
STD-1344, Method 2004, Cond. A
Vibration —MIL-STD-1344, Method
2005, Cond. II
Straight Contacts
Pin
Socket
A
Max.
A
Max.
B
Dia.
Max.
B
Dia. Max.
Alignment Ring
for use in
Subminiature D
housing only
Dimensions
50 Ohm
Non-Impedance Matched
Shell
Type
Die
Insert*
RG/Cable
A
B
Pin
Socket
Pin
Socket
178, 178A
24.13
5.94
,
Brass
Brass
59993-1
59993-1
—
—
5228618-5 5228596-5
5228618-1 5228596-1
178B,196, 196A
.950
.234
174, 316,
188, 188A
24.28
.956
5.94
.234
5221980-1
—
—
179, 179A,
179B, 187,
24.28
.956
5.94
.234
Brass
59993-1
—
5228618-2 5228596-2
187A, 161,
BELDEN 9221
174, 316, 188,
Double Braid
24.28
5.94
Brass
Brass
59993-1
58212-1
—
—
—
5228618-3 5228596-3
5228618-4 5228596-4
.956
.234
142, 142A, 142B,
400, BELDEN 9246
27.43
1.08
6.48
.255
5221981-2
*For hand tool 69710-1 or pneumatic tool 69365-8.
Note: Non-Impedance Matched and 50 Ohm are not intermateable.
BELDEN is a trademark of Belden Wire
and Cable Company.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
242
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Size 8 Contacts (Continued)
PC Board Mount Contacts
Right-Angle Socket Contact
6.50
[.256]
11.33
[.446]
17.58
[.692]
±0.08
5.08
[.200
±.003
]
±0.08
1.02
[.040
Dia.
±0.08
2.54
[.100
±.003
]
±.003
]
(5 Holes)
±0.08
5.08
[.200
±.003
]
±0.08
2.54
[.100
±.003
]
Recommended PC Board Layout
Contact Part No.
Type
Non-Impedance
Matched
Right-Angle
Socket Contact
5221162-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
243
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
COAXICON Contacts
Miniature Contacts are
designed for high density
multiple circuit connector
applications. A wide range
of cable sizes is accommo-
dated by using three sizes
of outer shell termination
ends and three sizes of
contacts.
Product Facts
■ Tyco Electronics provides
a variety of contacts for
coaxial connectors
■ Contacts are available in
a range of sizes that may
be used with the various
types of coaxial cable on
the market
Subminiature Contacts
are used in high density
applications and are ideal
for mixing coaxial and other
styles of pin and socket
contacts in the same con-
nector housing.
■ COAXICON contacts are of
the crimp, snap-in type and
are available in the follow-
ing designs: Miniature
Contacts, Subminiature
Contacts and Size 8 Contacts
Size 8 Contacts are com-
patible with industry stan-
dard size 8 connectors
such as Subminiature D
and AMP-HDI connector
housings. Straight and
right-angle styles, as well
as pc board versions for
AMP-HDI connectors are
available.
244
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Miniature Contacts
Temperature Range —-55°C to
Inner Dielectric—Polypropylene,
nylon, or polymethylpentene, general
purpose
Retention Spring —Stainless steel
per QQ-S-766
Performance Characteristics
Finish
+125°C
Insulation Resistance —5000
megohms min
Outer Shell, Center Conductor —
0.00076 ꢀ.000030ꢁ gold over 0.00076
ꢀ.000030ꢁ nickel
Retention Spring — Nickel per
QQ-N-290
Test Method for Electronic and
Electrical Component Parts —
MIL-STD-202
Dielectric Withstanding Voltage—
1,000 volts rms for 1 minute
Contact Resistance —2.0 milliohms
@ 1 ampere
Low-Level Conductivity —10 milli-
volts DC min.
VSWR—1.3 to 1.0 @ 1,000 MHz max.
Cable Retention —
Ferrule— Copper per QQ-C-576
Material
Ferrule— Bright tin per MIL-T-10727
Outer Shell —Brass per MIL-C-50
Center Conductor —Brass per
QQ-B-626, or Beryllium copper
per QQ-C-533
Retention Springs
Part No. 201142-2
Note:
A ferrule and retention spring
(201142-2) are required for each pin
and socket.
RG/U
Retention
lbs [N]
50 ꢀ222ꢁ
30 ꢀ133ꢁ
28 ꢀ125ꢁ
16 ꢀ71ꢁ
Cable
58C
188A
180B
195A
Extraction Tool No. 305183-8
Ferrules
Durability—500 cycles @ 10 cycles
per minute max.
Vibration —2 hrs. per MIL-STD-202,
Method 201
Shock —50 G’s per MIL-Std-202,
Method 213, Cond. G
Temperature Cycling —5 cycles per
MIL-STD-202, Method 102, Cond C.
Socket
Pin
Die Insert for Tools:
Part Numbers
Ferrule
Integral Die
Hand Tool
Hand Tool 69710-1
Pneu. 69365-2,
69365-32
RG/U Cable
No.
PRO-CRIMPER
Pin
Socket
316, 188, 188A
328666-X
174
—
—
—
—
69227-2
201143-5
201143-1
201144-5
179, 179A, 179B
161, 187, 187A
Belden 9221
328666-X
69227-2
201144-1
188 Double Braid
316 Double Braid
221848-3
328664-X
58290-1
45639-2
—
69227-2
69222-2
201143-5
201145-1
201144-5
122
91912-3
—
180, 180A, 180B
195, 195A,
21-597
328664-X
45639-2
91912-3
69222-2
201145-2
201146-2
Belden 8218
328664-X
328663-X
45639-2
45740-2
91912-3
—
69222-2
69220-2
201145-2
201145-4
201146-2
201146-4
58, 58A, 58B, 58C
141
-X
330478
69248-4
—
69315-4
201145-4
201146-4
55, 55A, 55B, 223
124, 140, 210
62, 62A, 62B
59, 59A, 59B
329006-X
—
—
69675-1
201097-1* 201098-1*
Twisted Pair
24-22 AWG ꢀ0.2-0.4 mm2ꢁ
-X
328666
91912-4
45740-2
45639-2
—
—
69672-X
69220-2
69222-2
201143-5
201145-4
201145-2
201144-5
201146-4
201146-2
(Stranded)1
Shielded Wire
22, NAS-702, Class B
-X
328663
Brand Rex T5788A
-X
328664
91912-3
26 AWG ꢀ0.12-0.155 mm2ꢁ3
*These contacts are for use in the 4-position G Series connector modules only.
1Maximum insulation diameter–2.92 [.115] (two wires combined).
2Includes bench mount and foot control; requires Manual Take-Up Attachment No. 69689.
3Dielectric O.D.–2.69 [.106] max.; Cable O.D.–4.06 [.160].
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
245
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Miniature PC Board Sockets
Material
Shell and Center Contact —Brass
per MIL-C-50 and QQ-B-626
Dielectric —Polypropylene, or
Polymethylpentene, general purpose
Shell
Finish
Spring Latch
Center Contact —0.00076 ꢀ.000030ꢁ
gold over copper
Shell —Gold plated per MIL-G-45204
Performance Characteristics
Dielectric Withstanding Voltage—
1,000 volts, rms
Impedance —Non-constant
Locking Latch
Operating Temperature Range —
-55°C to +85°C
Center Conductor
15.24
[.600]
Spring
Locking Latch
Latch
2.54
12.7
2.54
[.100]
2.54
[.100]
6.23
[.245]
[.100]
[.500]
Ref.
Ref.
4.52
[.178]
Ref.
Dia.
2.54
[.100]
1.32
[.052]
(5 Holes)
Dia.
A
0.36
[.014]
Ref.
Recommended
Mounting Hole Layout
B
12.7
[.500]
1.02
[.040]
Dia.
1.27
[.050]
2.54
[.100]
Typ.
17.78
[.700]
Retention
Dimensions
PC Board
Thickness
Type
Part No.
50084-1
50095-1
50105-1
50107-1
lb.
[N]
A
B
1.57
.062
9.07
.357
3.18
.125
Spring Latch
Spring Latch
Locking Latch
Locking Latch
1.25
5.56
3.18
.125
7.49
.295
4.75
.187
1.25
7.25
7.25
5.56
31.16
31.16
3.18
.125
7.49
.295
4.75
.187
1.57
.062
9.07
.357
3.18
.125
Note: For mateable Miniature Contacts, see page 245.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
246
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Subminiature PC Board Sockets
Material
Shell and Center Contact —Brass
per MIL-C-50 and QQ-B-626
Shell
Dielectric —Polypropylene, or
polymethylpentene, general purpose
Locking Latch
Finish
Center Contact —0.00076ꢀ.000030ꢁ
gold per MIL-G-45204 over copper per
MIL-C-14550
Shell —Gold
Spring Latch
Center Conductor
Performance Characteristics
Dielectric Withstanding Voltage—
600 volts, rms
Operating Temperature Range —
-55°C to +85°C
22.23
[.875]
Max.
3.05 ±.0.2
[.120 ±.008
]
4.52
[.178]
1.09
[.043]
#57 Drill
(3 Holes)
Dia.
1.47 [.058]
Locking
Latch
A
0.84±0.2
0.84
[.033]
10.16
[.400]
[.033±.008
]
Dia.
10.16
[.400]
15.24
[.600]
15.24
[.600]
Recommended
Mounting Hole Layout
PC Board
Thickness
1.57
.062
Dim.
Type
Part No.
226023-1
226060-1
L
2.54
.100
Spring Latch
Locking Latch
1.57
.062
2.54
.100
Mating Subminiature
COAXICON Pins
These short Subminiature COAXICON
Pins are recommended for use with any
of the sockets listed above.
Note: Alignment springs are not
required for this application and are not
included with the pin assemblies.
Die Insert for Tools:
Hand Tool 69710-1
Pneu. 69365-2,
69365-3
Integral
Die
RG/U
Ferrule
No.
Part No.
51563-8
Cable
Hand Tool
174
1-332056-0
91911-3
69690-X
316, 188, 188A
179, 179A, 179B
187, 187A
1-332056-0
1-332056-0
91911-4
69656-5
69690-1
—
51563-8
51563-8
161
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
247
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Subminiature Contacts
Material
Outer Shell —Brass per MIL-C-50
Center Conductor —Beryllium
copper per QQ-C-533 (Pin);
Brass per QQ-B-626 (Socket)
Inner Dielectric—Polypropylene,
nylon, or polymethylpentene, general
purpose
Ferrule
Retention Spring —Stainless steel
per QQ-S-766
A
Ferrule
Ferrule —Copper per QQ-C-576
Finish
Outer Shell and Socket
Center Conductor —0.00076
ꢀ.000030ꢁ gold over 0.00127 ꢀ.000050ꢁ
nickel
16.51
[.650]
Max.
Socket
Pin
Pin Center Conductor —0.00076
ꢀ.000030ꢁ gold over
0.00254 ꢀ.000100ꢁ copper
Ferrule —Bright tin per MIL-T-10727
A = Multimate Pin 25.65 [1.010]
Short Pin 22.66 [.892]
Selection Chart for Coaxial Cable
Die Insert for Tools:
Hand Tool 69710-1
Pneu. Tool 69365-2,
69365-3*
Contact Part Numbers
Integral
RG/U Cable
Die
PRO-CRIMPER
Multimate
Short
Pin
Hand Tool
Socket
51565-2
51565-2
51565-1
Ferrule
Pin
178, 178A, 178B
196, 196A
69656-2
69656-9
—
69690-2
—
226537-2
—
—
—
1-332057-0
1-225088-1
1-332056-0
196
(Double Braid)
226537-2
174, 316
188, 188A
91911-3
69690
-226537-1
179, 179A, 179B
187, 187A
Belden 9221
—
911911-4
69690-1
226537-1
—
51565-1
1-332056-0
RD-316
69656-7
69656-8
69656-5
—
—
—
226537-1
226537-1
226537-1
—
—
—
51565-1
51565-1
51565-1
1-225088-3
1-225088-1
1-332056-0
187
(Double Braid)
161
Selection Chart for Twisted Pairs and Shielded Wire
Die Insert
for Tools:
Hand Tool
69710-1
Pneu. Tool
69365-2,
69365-3*
Contact Part Numbers
Multimate Short Socket
Pin Pin
Wire Size
AWG
Integral Die
Hand Tool
PRO-CRIMPER
Ferrule
[mm2]
30
0.05
69656-2
—
—
69690-2
69690-
226537-3 51563-3 51565-3 1-332057-0
226537-3 51563-3 51565-3 1-332057-0
(Twisted Pair, Solid)
28
0.08-0.09
91911-3
(Twisted Pair, Solid)
28
69690-1
or
(Twisted Pair, Stranded; 0.08-0.09
7 str., .005 ꢀ0.13ꢁ Dia.)
—
—
91911-4
91911-3
—
226537-3 51563-3 51565-3 1-332057-0
226537-3 51563-3 51565-3 1-332057-0
69690-2
26
(Twisted Pair,
0.12-0.15
69690-2
69690-3
Solid or Stranded;
7 str., .0063 ꢀ0.16ꢁ Dia.)
26
(Shielded, 0.75 ꢀ1.91ꢁ 0.12-0.15
Max. O.D.)
69656-3
226537-1
—
51565-1 1-332057-0
*Includes bench mount and foot control.
Extraction Tool 305183
Note: A ferrule is required for each pin and socket.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
248
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SIEMAX Connectors
Applications
■ Multiplex Systems
■ Base Stations
■ High Density Systems
Product Facts
■ Multi Coax Surface Mount
■ Maximum packaging density
■ Component placement on
both sides of PCB
■ Fully automated assembly
(pick-and-place)
■ Modular design
SIEMAX connectors com-
bine the benefits of surface
nector is ideal for systems
requiring superior packag-
be stacked, enabling any
required configuration to
be produced. The SIEMAX
connector also allows the
use of any other connector
series, e.g. SMB, is resist-
ant to high temperatures,
and is robust, with reliably
sustained coplanarity.
Technical Data
■ Interface: Series 1.0/2.3
■ Impedance: 75ꢀ
mount technology and mod- ing density because it can
ular design. This multi coax
connector is packaged in
tape-and-reel for automatic
placement, has optimum
solder joints and 100%
be placed on both sides of
the printed circuit board.
The modular design pro-
vides flexibility in terms of
the number of poles offered
(two- or three-poles). It can
■ International specifications:
IEC 169-29 and CECC 22 230
reflow suitability. This con-
■ Frequency range up to 2 GHz
■ Compact grid pitch 10
[0.39]
■ Guaranteed coplanarity of
max. 0.1 [0.004]
■ Integrated positioning pins
for manual placement
■ Optional mechanical
securing
For General Information
on Series 1.0/2.3 Connectors, see
Page 129.
249
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
specified. Values in brackets
are standard equivalents.
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SIEMAX Connectors, Series 1.0/2.3 (75 Ohm)
± 0.05
12.10
[.476
SIEMAX Connector, SMT
Right-Angle Jack, 2 Poles
± .002
]
± 0.05
11.10
[.437
± .002
]
0.05 [.002] 10 Plcs.
2.00
[.079]
18.0
[0.71]
24.0
[0.94]
± 0.05
± .002
10.0
[0.39]
2.80
[.110
Ø 4.15
[0.16]
]
2.00
[.079]
14.00
[.551]
x 7 =
± 0.05
17.50
[.689
± 0.05
3.00
[.118
6.5
[0.26]
± 0.05
± .002
2.00
[.079
± .002
± 0.05
± .002
]
7.20
[.283
± .002
]
]
]
± 0.05
± .002
5.10
[.201
± 0.05
2.00
[.079]
13.00
[.512
]
± .002
]
± 0.05
± .002
1.90
[.075
Coupling type*
Part No.
]
C, F
6-1393696-2
+ 0.10
Ø 1.40
*For coupling type see DIN 1.0/2.3
Section.
– 0.00
+ .004
– .000
0.05 [.002] 8 Plcs.
[.055
]
+ 0.10
1.90
± 0.05
± .002
1.60
[.063
– 0.00
+ .004
– .000
]
[.075
]
2.00
[.079]
8.00
[.315]
x 4 =
PC Board Layout
28.0
[1.10]
SIEMAX Connector, SMT
Right-Angle Jack, 3 Poles
24.0
[0.94]
10.0
[0.39]
10.0
[0.39]
Ø 4.15
[0.16]
6.5
[0.26]
3.5
[0.14]
± 0.05
12.10
[.476
± .002
]
± 0.05
11.10
[.437
± .002
]
Coupling type*
Part No.
6-1393696-7
0.05 [.002] 10 Plcs.
+ 0.10
C, F
1.90
– 0.00
+ .004
– .000
23 Plcs.
2.00
[.079]
+ 0.10
1.20
[.075
]
– 0.00
+ .004
– .000
*For coupling type see DIN 1.0/2.3
Section.
23 Plcs.
[.047
]
± 0.05
± .002
1.90
[.075
4.00
[.157]
]
Ø 2.50
[.098]
17.20
[.677]
20.00
[.787]
2.00
[.079]
2.80
[.110]
x 12 =
± 0.05
± .002
24.00
[.945]
10.00
[.394]
27.50
[1.083
]
2.00
[.079]
± 0.05
23.00
[.906]
4.40
[.173
± .002
]
± 0.05
5.10
[.201
2.00
[.079]
± .002
]
+ 0.10
Ø 1.40
– 0.00
+ .004
– .000
0.05 [.002] 13 Plcs.
[.055
]
+ 0.10
– 0.00
+ .004
± 0.05
± .002
1.90
1.60
[.063
]
[.075
]
– .000
2.00
[.079]
8.00
[.315]
Note: Part Numbers are RoHS
compliant except:ꢀ Indicates
non-RoHS compliant.
x 4 =
PC Board Layout
250
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Between Series Adapters
Between Series Coaxial
Transmission Line Adapters
provide convenient transi-
tions between popular
series coaxial connectors.
The adapter design pro-
vides a minimum length
consistent with good electri-
cal performance. The small
size, low VSWR, and broad
frequency coverage permits
a wide range of applications
in both measurement and
systems use.
Design and Construction
Types
Application
The standard units are
constructed of stainless
steel with passivated finish,
nickel plated brass, and
gold plated brass. The
material and plating is to be panel mount versions are
consistent with the basic
connector series. All
dielectrics are TFE fluoro-
carbon. The center con-
tacts are made of beryllium
copper, gold plated.
The straight in-line adapters The major application is
are available in many
combinations of plug and
jack (male and female) con- both test system and oper-
figurations. Also, popular
the requirement for a low
VSWR, compact transition in
ating systems. Many panel
mount and bulkhead mount
versions are available so the
designer can use small size
connectors for internal
design, but adapt to a
larger rugged version for
external connection.
cataloged. For special
modifications and hermetic
seal version, consult
Tyco Electronics.
Selection charts follow to
help you find the correct
adapter for your application.
Plug-Plug
MCX
N Series
BNC
Page 253
Page 253
Page 253
Page 253
Page 253
Series 1.6/5.6
Page 253
Page 253
SMA/SMA 18 GHz Page 253 Page 253 Page 253
Page 253
Page 253
Jack-Jack
N Series
BNC
TNC
SMA
SMA Bulkhead
SMA 18 GHz
Page 254
Page 254
Page 255
Page 256
Page 256
Page 254
Page 254
Page 254
Page 254 Page 255
and 255
Page 254
and 255
Page 254
Page 255
Page 255
and 256
Series 1.0/2.3
251
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Between Series Adapters (Continued)
Jack-Plug
7 mm
7 mm best VSWR
MCX
Page 256 Page 256
Page 256
Page 256
Page 256
Page 256
Page 256
Page 257
N Series
N Series Flange Mount
Page 256 Page 257
Page 257
Page 257 Page 257
OSP
OSP Bulkhead
Page 257
Page 257 Page 257
Page 258
BNC
TNC
Page 257
Page 258
Page 259
Page 258 Page 258
Page 259
TNC Flange Mount
SMB
75 OHM SMB
Page 259
Page 258
SMA
SMA Flange Mount
SMA 18 GHz
Page 258
and 259
Page 258
Page 260 Page 258 Page 259 Page 259
Page 259 Page 259
Page 259
SMP
SSMT
Page 260
Page 260
DIN-Series 1.0/2.3
DIN-Series 1.6/5.6
QMA
Page 260
Page 259
Page 260
Page 260
Page 260
UMCC
252
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Between Series Adapters (Continued)
Plug-Plug
MCX Plug – SMA Plug
7-16 Plug – N Series Plug
BNC Plug – SMB Plug
19.3
[.760]
Ref.
48.6
[1.912]
Ref.
34.1
[1.343]
Ref.
Ø 14.3
[.562]
Ref.
Ø 32.0
[1.260]
Ref.
6.4
[.250]
7.9
[.312]
Hex.
Hex.
Part No. 1061071-1
Part No. 1313453-1
Part No. 1058066-1
SMA 18 GHz Plug – N Series Plug
SMA Plug – SMB Plug
SMA Plug – SMP Plug
21.9
[.862]
Ref.
32.5
[1.281]
Ref.
17.5
[.690]
Ref.
6.4
[.250]
7.9
[.312]
7.9
[.312]
Hex.
Hex.
Ø 21.0
[.828]
Hex.
Ref.
Part No. 1060494-1
Part No. 1056706-1
Part No. 1057367-1
SMA Plug – SSMT Plug
SMA Plug – OSP Plug
Series 1.6/5.6 Plug – Series 1.0/2.3 Plug
17.0
[.670]
Ref.
Ø 10.8
[0.43]
Ø 6.5
[0.26]
13.7
[.538]
Ref.
1)
1)
9.2
8.9
28.0
7.9
Hex.
[.312]
[0.36]
[0.35]
[1.10]
Part No. 1055695-1
Part No. 1059711-1
Part No. 2-1393670-1ꢀ
Coupling Type A
1) Detent for jack
BNC Plug – Series 1.6/5.6 Plug
QMA Plug – SMA Plug
30.60
Ref.
[1.20]
Ø 14.5
[0.57]
SMA Plug
QMA Plug
Hex.
Ø 10.8
[0.43]
46.4
[1.83]
7.90
8.70
[0.34]
Hex.
[0.31]
Part No. 1-1393665-4ꢀ
Part No. 1408393-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
253
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Between Series Adapters (Continued)
Jack-Jack
7-16 Jack – N Series Jack
BNC Jack – SMB Jack
BNC Jack – 75 ohm SMB Jack
30.4
[1.197]
51.0
[2.010]
12.9
[.508]
3.82
[.150]
12.0 Across
[.472] Flat
32.1
[1.265]
Ref.
Ø 14.3
[.562]
Ref.
Ø 12.9
[.508]
17.4
[.687]
15.8
[.625]
Hex.
Hex.
Part No. 1311206-1
Part No. 1058056-1
Part No. 1311209-1
TNC Jack – N Series Flange Mount Jack
TNC Jack – BNC Jack
MCX Jack – SMA Jack
49.1
[1.932]
Ref.
2.0
43.1
Ref.
15.6
[.615]
[.080]
25.4
Sq.
[1.698]
16.7
[.656]
[1.00]
6.4
Hex.
[.250]
Ø 14.5
Ref.
[.572]
18.2
[.718]
Ø 3.2
[.125]
Typ.
4 Plcs.
Part No. 1057843-1
Part No. 1057845-1
Part No. 1061070-1
SMA Jack – N Series Jack
SMA Jack – N Series Flange Mount
SMA Jack – N Series Bulkhead Jack
31.3
[1.232]
18.2
[.718]
31.3
[1.231]
22.0
[.867]
6.3 Max.
[.250] Panel
3.2
31.3
[1.231]
Ø 15.9
Min.
13.6
[.534]
Min.
[.625]
[.125]
25.4
[1.00]
Sq.
4.7 Max.
[.187] Panel
Ø 17.45
Ref.
Ø 3.2
[.125]
4 Plcs.
[.687]
Recommended
Mounting Hole
Ø 22.0
[.866]
Part No. 1057341-1
Part No. 1057343-1
Part No. 1057463-1
SMA Jack – BNC Jack
BNC Bulkhead Jack – SMA Jack
TNC Flange Mount Jack – SMA Jack
33.5
[1.320]
Ref.
25.4
[1.000]
2.4
[.093]
17.4
[.687]
17.9
[.703]
Ø 12.7
[.500]
Sq.
Min.
Ø 14.3
[.562]
33.5
[1.320]
Ref.
5.6
[.220]
Min.
8.0
[.315]
12.7
[.500]
Typ.
3.2 Max.
[.125] Panel
4.8
Ø 11.1
[.437]
Recommended
Mounting Hole
[.188]
Max.
Panel
15.9
[.625]
17.4
[.687]
Hex.
Hex.
Part No. 1058058-1
Part No. 1058117-1
Part No. 1057841-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
254
Catalog 1307191
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Revised 3-07
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Between Series Adapters (Continued)
Jack-Jack (Continued)
SMA Jack – TNC Bulkhead Jack
SMB Jack – SMA Jack
SMA Jack – SMP Jack
33.0
[1.300]
6.4 Max.
[.250] Panel
17.8
[.700]
5.0
[.196]
12.6
[.498]
Min.
3.2
[.125]
Ø 11.2
[.439]
Min.
4.70
[.187]
6.4
Hex.
[.250]
Recommended
Mounting Hole
14.3
[.562]
Ø 16.7
[.656]
Hex.
Part No. 1056702-1
Part No. 1057908-1
Part No. 1060487-1
SMA Jack – SSMT Jack
OSP Jack – SMA Bulkhead Jack
SMA 18 GHz Jack – N Series Jack
17.3
[.680]
31.2
[1.229]
Ref.
3.2 Max.
[.125] Panel
+ 0.03
– 0.00
+ .001
– .000
Ø 6.15
5.8
[.230]
[.242
]
12.9
[.508]
Ref.
Ø 17.4
Ref.
[.687]
Recommended
Mounting Hole
7.9
[.312]
7.9
[.312]
Hex.
Hex.
Part No. 1055694-1
Part No. 1059733-1
Part No. 1058651-1
SMA 18 GHz Jack –
SMA 18 GHz Jack – N Series Bulkhead Jack
OSP Jack – SMA Jack
N Series Flange Mount Jack
31.3
31.2
[1.229]
[1.232]
22.0
[.867]
Ref.
Ø 3.2
[.125]
6.3 Max.
4 Plcs.
14.1
[.554]
16.5
[.650]
[.250] Panel
13.6
[.534]
Min.
18.2
[.718]
Ø 15.9
[.625]
3.2
[.125]
2.0
Typ.
Min.
[.080]
Ø 7.6
[.300]
4.7 Max.
[.187] Panel
Recommended
Mounting Hole
Ø 16.0
[.630]
Max.
Ø 22.0
[.866]
25.4
[1.000]
Sq.
Part No. 1058653-1
Part No. 1058675-1
Part No. 1059707-1
SMA Jack – OSP Bulkhead Jack
OSP Floating Flange Mount Jack –
SMA Jack
SMA Jack –
OSP Floating Rear Mount Jack
+ .050
Ø 8.0
– .000
11.1
[.437]
11.1
[.437]
+ .002
– .000
+ 0.03
Hex.
Hex.
]
[.316
Ø 9.6
– 0.05
+ .003
– .000
+ .001
– .000
Ø 9.12
Ø 2.6
[.102]
2 Plcs.
+ .002
– .001
Ø 7.6
[.300]
22.2
[.377
]
± .076
± .003
[.359
]
11.2
[.440
[.874]
]
14.2
1.7
[.065]
14.2
Ø 9.4
[.372]
[.560]
[.560]
3.2 Max.
[.125] Panel
Recommended
Mounting Hole
Ø 19.1
[.750]
6.4
22.2
[.874]
+ .000
– .127
+ .000
+ .076
– .000
+ .003
– .000
1.3
[.050
Ø 8.6
[.250]
3.2 Max.
[.125] Panel
9.7
[.380]
]
[.340
]
14.1
Ref.
– .005
Recommended
Mounting Hole
[.554]
Recommended
Mounting Hole
Part No. 1059729-1
Part No. 1059731-1
Part No. 1059724-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
255
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Between Series Adapters (Continued)
Jack-Jack (Continued)
BNC Jack –
Series 1.6/5.6 Jack
Series 1.0/2.3 Jack –
Series 1.6/5.6 Jack
Ø 9.6
[0.38]
Ø 8.2
[0.32]
Ø 8.2
[0.32]
Ø 4.1
[0.16]
Ø 14.5
[0.57]
39.4
[1.55]
Ø 10.8
[0.43]
M9.0x0.5
[0.35]x[0.02]
Ø 11.0
[0.43]
45.4
[1.79]
Part No. 1-1393665-5ꢀ
Part No. 2-1393670-4ꢀ
Coupling Type A, B, F
Jack-Plug
N Series Plug to 7 mm Jack
OSP Plug to 7 mm Jack
TNC Plug to 7 mm Jack
19.1
[.750]
19.1
[.750]
Hex.
19.1
[.750]
Ø 22.4
[.880]
Hex.
Ø 22.4
[.880]
Hex.
Ref.
Ref.
11.1
[.437]
Hex.
Ø 22.1
[.870]
43.3
[1.705]
15.9
[.625]
40.9
[1.610]
Ref.
30.7
[1.208]
Ref.
Hex.
Ref.
Part No. 1061742-1
Part No. 1059713-1
Part No. 1061739-1
SMA Flange Mount Plug to 7 mm Jack
SMA Plug to 7 mm Jack
N Series Plug to 7 mm Best VSWR Jack
Ø 3.2
[.125]
7.9
[.312]
19.1
[.750]
Hex.
Hex.
Ø 22.4
4 Plcs.
Ref.
[.880]
19.1
[.750]
Ø 22.4
[.880]
19.1
[.750]
Ø 22.4
[.880]
Hex.
Ref.
Hex.
Ref.
19.1
[.750]
2.1
[.083]
Typ.
Sq.
7.9
[.312]
Hex.
31.8
[1.25]
Ref.
2.4 Max.
[.093] Panel
43.3
[1.705]
Ref.
25.4
[1.000]
35.0
[1.380]
Ref.
Part No. 1061751-1
Part No. 1053646-1
Part No. 1061738-1
TNC Plug to 7 mm Best VSWR Jack
MCX Jack – SMA Plug
N Series Jack – 7 mm Plug
19.1
[.750]
Ø 22.4
[.880]
Hex.
19.1
[.750]
Ref.
Ø 22.4
[.880]
16.8
[.660]
Ref.
Hex.
Ref.
6.4
[.250]
7.9
[.312]
36.7
[1.445]
Ref.
40.9
[1.610]
15.9
[.625]
Hex.
Hex.
Ref.
Hex.
Part No. 1061744-1
Part No. 1061073-1
Part No. 1061757-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
256
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Between Series Adapters (Continued)
Jack-Plug (Continued)
N Series Jack – 7 mm Best VSWR Plug
BNC Plug – N Series Jack
N Series Jack – TNC Plug
19.1
[.750]
Ø 22.4
Ref.
Hex.
Ø 16.8
Ref.
[.880]
51.9
[2.043]
Ref.
[.660]
Ø 16.8
[.660]
Ø 15.9
[.625]
Ref.
Ref.
36.7
[1.445]
Ref.
52.7
Ref.
[2.076]
Part No. 1061752-1
Part No. 1057392-1
Part No. 1057388-1
SMA Plug – N Series Jack
SMA 18 GHz Plug – N Series Jack
SMA Plug – N Series Flange Mount Jack
32.3
[1.270]
Ref.
Ø 3.2
[.125]
4 Plcs.
32.8
[1.292]
Max.
32.3
[1.270]
Hex.
Ref.
7.9
[.312]
7.9
[.312]
Hex.
18.2
[.718]
4.7 Max.
[.187] Panel
Typ.
Ø 17.4
[.687]
Ø 17.45
[.687]
7.9
[.312]
Ref.
Hex.
Ref.
25.4
[1.000]
Sq.
Part No. 1057381-1
Part No. 1058664-1
Part No. 1057385-1
OSP Jack – 7 mm Plug
SMA Plug – OSP Jack
SMA Plug – OSP Bulkhead Jack
17.4
[.686]
Ref.
17.4
6.4
29.6
[1.166]
Ref.
Ø 22.4
[.880]
[.685]
Ref.
Ø 7.6
[.300]
[.250]
+ 0.03
– 0.00
+ .001
– .000
Ref.
Ø 9.12
3.2 Max.
[.125] Panel
[.359
]
7.9
[.312]
Hex.
11.1
[.437]
Hex.
Recommended
Mounting Hole
19.1
[.750]
Hex.
11.1
[.437]
7.9
[.312]
Hex.
Hex.
Part No. 1059720-1
Part No. 1059718-1
Part No. 1059758-1
BNC Jack – N Series Plug
BNC Jack – SMB Plug
SMA Plug – BNC Jack
34.6
Ref.
35.8
[1.408]
Ref.
49.1
[1.934]
Ref.
[1.362]
Ø 14.3
Ref.
7.9
[.312]
Ø 14.3
[.562]
Ø 21.0
[.827]
Hex.
Ref.
Ref.
[.562]
Part No. 1057390-1
Part No. 1058077-1
Part No. 1058083-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
257
Catalog 1307191
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Revised 3-07
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Between Series Adapters (Continued)
Jack-Plug (Continued)
TNC Jack – 7 mm Plug
TNC Jack – 7 mm Best VSWR Plug
TNC Jack – N Series Plug
19.1
[.750]
Ø 22.4
[.880]
19.1
[.750]
Ø 22.4
Ref.
Hex.
Ref.
Hex.
49.1
[1.934]
Ref.
[.880]
41.3
[1.625]
Ref.
41.3
[1.625]
Ref.
Ø 21.0
[.827]
Ref.
Part No. 1061753-1
Part No. 1061758-1
Part No. 1057387-1
TNC Flange Mount Jack – SMA Plug
SMA Plug – SMB Jack
SMA Jack – MCX Plug
26.4
[1.038]
Ref.
17.4
[.687]
Sq.
20.7
[.815]
Ref.
2.0
[.080]
18.2
[.716]
12.7
[.500]
Typ.
13.4
[.529]
Ref.
6.4
6.4
[.250]
Hex.
[.250]
7.9
[.312]
Hex.
Hex.
7.9
[.312]
Ø 11.8
[.465]
Max.
Hex.
Part No. 1057857-1
Part No. 1060500-1
Part No. 1061072-1
SMA Jack – BNC Plug
TNC Plug – SMA Jack
SMA 18 GHz Jack – N Series Plug
31.5
[1.250]
Ref.
31.8
[1.250]
Ref.
25.4
[1.000]
Ref.
Ø 15.9
[.625]
Ø 14.3
Ref.
Ref.
Ø 21.0
[.828]
[.562]
Ref.
Part No. 1057377-1
Part No. 1058081-1
Part No. 1057853-1
SMA Jack – SMB Plug
SMA Jack – SMP Plug
SMA Jack – SSMT Plug
19.3
[.760]
Ref.
14.2
[.560]
10.5
[.413]
Ref.
6.4
Hex.
[.250]
Part No. 1060498-1
Part No. 1056707-1
Part No. 1055696-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
258
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Between Series Adapters (Continued)
Jack-Plug (Continued)
SMA Jack – UMCC Plug
SMA Jack – UMCC Plug
SMA Flange Mount Jack – 7 mm Plug
19.1
[.750]
Hex.
Ø 3.2 Dia.
[.125] 4 Plcs.
14.0
[.551]
14.0
[.551]
19.1
[.750]
Ø 22.4
[.880]
Typ.
Ref.
Ø 6.25
[.246]
Ø 6.25
[.246]
10.0
[.393]
10.0
[.393]
5.6
[.220]
5.6
[.220]
Ø 5.3
[.208]
Ø 2.6
[.102]
Ø 5.3
[.208]
Ø 2.5
[.098]
2.0
[.080]
25.4
[1.000]
Sq.
23.5
[.925]
Ref.
1/4-36UNS
1/4-36UNS
30.5
[1.200]
Part No. 1775229-1
Part No. 1775230-1
Part No. 1061750-1
SMA 18 GHz Jack – 7 mm Plug
N Series Flange Mount Plug –
SMA 18 GHz Jack
OSP Plug – SMA Jack
31.8
[1.250]
Ø 3.2
4 Plcs.
11.7
[.461]
19.1
[.750]
Ø 22.4
[.880]
[.125]
Hex.
Ref.
13.7
6.4
18.2
[.718]
[.538]
[.250]
2.0
[.080]
Typ.
30.9
[1.216]
Ref.
Ø 7.6
[.300]
Ø 12.7
[.500]
Min.
Panel
Hole
6.4 Max.
[.250] Panel
25.4
[1.000]
Sq.
Part No. 1053788-1
Part No. 1058666-1
Part No. 1059716-1
SMA 18 GHz Jack – OSP Bulkhead Plug
SMP Jack – SMA Plug
SSMT Jack – SMA Plug
19.3
[.760]
11.4
3.2
[.125]
Max
[.447]
1.7
[.065]
16.0
[.632]
7.90
[.312]
Ref.
16.2
[.639]
+ 0.03
– 0.00
+ .001
– .000
Hex.
Ref.
Ø 6.15
[.242
]
SMA
Plug
Panel
SSMT
Jack
SMA Plug
OSMP
Jack
Recommended
Mounting Hole
Hex.
11.1
[.437]
7.9
[.312]
Hex.
Part No. 1059756-1
Part No. 1056708-1
Part No. 1055697-1
BNC Jack – Series 1.6/5.6 Plug
BNC Plug – Series 1.6/5.6 Jack
Series 1.6/5.6 Plug – Series 1.0/2.3 Jack
Ø 9.6
[0.38]
Ø 10.8
Ø 4.1
Ø 10.8
[0.43]
[0.43]
[0.16]
Ø 14.5
[0.57]
Ø 14.5
[0.57]
Ø 8.2
[0.32]
44.3
[1.74]
1)
9.2
33.0
45.4
[1.79]
Ø 11.0
[0.43]
[0.36]
[1.30]
Part No. 1-1393665-7ꢀ
Part No. 1-1393665-6ꢀ
Part No. 2-1393670-2ꢀ
Coupling Type A, B2, F2
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
259
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Between Series Adapters (Continued)
Jack-Plug (Continued)
Series Plug 1.0/2.3 – Series 1.6/5.6 Jack
QMA Jack – SMA Plug
UMCC Jack – SMA Plug
Ø 10.8
[0.43]
Ø 6.5
[0.26]
10.60
[.417]
21.50
[0.85]
Ø 8.2
[0.32]
Ref.
1.10
[.043]
8.0
[.315]
Hex.
QMA Jack
SMA Plug
1)
6.35
[0.25]
7.90
Hex.
[0.31]
8.9
[0.35]
Ø 2.00
[.078]
34.5
[1.36]
Hex.
Part No. 2-1393670-3ꢀ
Coupling Type A, B2, F2
Part No. 1408343-1
Part No. 1775228-1
1) Detent for jack
2 Only jackside
UMCC Jack – SMA Plug
10.60
[.417]
1.10
8.0
[.315]
Hex.
[.043]
Ø 1.90
[.074]
Part No. 1775227-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
260
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Coaxial Terminations
Coupling Nut
SMA Plug Terminator
Part Number 1460802
Dielectric
Shell
Plating — Gold
Frequency — 6 GHz
Center
Conductor
2.50
[.098]
Max.
SW 8 h11
3.40
[.134]
Max.
11.00
[.433]
Max.
Coupling Nut
SMC Plug Terminator
Part Number 1460803
Dielectric
Shell
Center
Conductor
Plating — Gold
Frequency — 6 GHz
+ 0.10
3.30
– 0.30
+ .004
– .012
SW 6 h11
[.130
Max.
]
13.00
[.512]
17.70
[.697]
Push Pull Plug Terminator
Part Number 619219
Ref.
Ø 7.70
[.303]
Ø 8.30
[.327]
Plating — Gold
Frequency — 6 GHz
8.00
5.50
[.315]
[.217]
QMA Plug Terminator
Part Number 619271-1
Single Packaging
19.80
[.780]
Plating — Standard Gold
Part Number 5-619271-1
1000 Pieces per Pack
Plating — Standard Gold
Ø 10.50
[.413]
Part Number 619271-2
Single Packaging
Plating — Higher Gold
Part Number 5-619271-2
1000 Pieces per Pack
Plating — Higher Gold
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
261
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Application Tooling
Installation Kit
Part No. 1055469-1
For TNC Connectors
Inserts
Locator Tool
Solder Gage
Center Contact Holder
Fixture Sub-Assembly
For installation of TNC Series connectors to 3.66 [.141] and 2.16 [.085] diameter semi-
rigid cable. Most BNC Series connectors can also be assembled using this kit. See
appropriate assembly procedure for specific tooling. This kit contains:
Model
No.
Part
No.
Description
NSN
Center Contact Holder
Fixture Sub-Assembly
Inserts – 2.16 [.085] (2)
Inserts – 3.66 [.141] (2)
Locator Tool
T-4580
T-4567
––
1055474-1
1055439-1
1055441-1
1055440-1
1055476-1
1055477-1
1055475-1
––
T-4700-2
T-4700-1
T-4596
5120-00-132-6808
5120-00-132-6807
––
––
––
Locator Tool
T-4574
Solder Gage .813 [.032]
T-4562-6
All Tools May Be Purchased Separately.
262
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Application Tooling (Continued)
Solder Assembly Kit
Brass SMA Connectors
Item Description
Part No.
Kit Part Number 1055420-1
Center Contact Holder
1055454-1
1055448-1
1055447-1
1055450-1
1055439-1
1055441-1
1055440-1
1055442-1
1055443-1
1055446-1
1055451-1
1055449-1
1055500-1
1055445-1
1055444-1
Dielectric Insert Tool
Dielectric Recess Tool
Fixture Sub-Assembly
Inserts — 2.16 [.085] (2)
Inserts — 3.58 [.141] (2)
Inserts
Locator Tool
Locator Tools
Retainer Ring Pliers
Solder Gauge 0.25 [.010]
Solder Gauge 0.38 [.015]
Solder Gauge 0.46 [.018]
Dielectric Insert Tool
Solder Gage
Retainer Ring Pliers
Dielectric Recess Tool
Fixture Sub-Assembly
Center Contact Holder
Universal Compression
Crimp Tool
Kit Part Number 1055835-1
Tyco Electronics Universal
Compression Crimp Tool
offers the ability to rapidly
produce cable assemblies
using solderless compres-
sion crimp connectors with
semi-rigid cables. This uni-
versal assembly tool kit will
attach SMA, OSP, N and
TNC series connectors to
3.58 [.141], 2.16 [.085] and
6.35 [.250] cable quickly
and consistently with
Crimp Frame
Anvil
excellent mechanical and
electrical results.
Gauge
Cable Supports
The tool kit permits single
hand assembly. Anvils and
cable supports can be
quickly changed. Crimp
lengths can be adjusted
from .025 [.001] to 25.4
[1.000] in increments of
.025 [.001]. Sharp radius
bends in cables are easily
accommodated. The kit
contains:
Description
Crimp Frame
Part No.
1055831-1
1055832-1
1055833-1
1055834-1
1055836-1
1055837-1
1055838-1
1055839-1
1055840-1
1055841-1
1055842-1
1055843-1
Calibration Gauge
3.58 [.141] Cable Support
2.16 [.085] Cable Support
SMA Plug Anvil
SMA Jack Anvil
Type N Plug Anvil
Type N Jack Anvil
TNC Plug Anvil
TNC Jack Anvil
OSP Plug Anvil
OSP Jack Anvil
All tools may be purchased separately.
263
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Application Tooling (Continued)
Crimping Tools
Crimping tools are used for
assembling coaxial connec-
tors on coaxial cables. They
can be applied particularly
economically for small
batch sizes.
The crimping dies are a
fixed part of the crimping
tools. Each tool is equipped
with 2 or 3 different profiles.
A total of 6 widths across
flats are possible with 2
tools, whose hand lengths
are adapted to the dimen-
sions of the hexagon pro-
files. The tools can be
Width Across Flats of the Profile
Dim.
L
Color of
handles
Item
Part No.
1
2
3
distinguished at a glance by
different colored handles.
2.8
0.11
3.2
0.13
3.6
0.14
214.0
8.43
Crimping Tool
Crimping Tool
Green
Yellow
1393524-4
1393524-5
2.8
0.11
5.4
0.21
4.5
0.18
260.0
10.24
L
3
2
1
50.0
[1.97]
Hexagon Profile No.
6.6
[0.26]
with Open Jaws
IDC Tool
For assembling IDC coaxial
connectors Series 1.6/5.6
mS on coaxial cables.
Part No.
1-1393524-1
225.0
[8.86]
1.4
[0.04]
Removal Tool
Item
Removal tool
Part No.
For replacing the special
contacts on connectors DIN
41612 M and SIEDECON.
12.5
[0.49]
70.0
[2.76]
length 70 [2.76] 2-1393524-4
length 200 [7.87] 2-1393524-6
Ferrule (spare part)
Spare part
Ferrule
2-1393524-7
12.5
[0.49]
200.0
[7.87]
264
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Application Tooling (Continued)
Setting Gauge
Protective Caps/Setting
Gauges
The setting gauges are used The gauges provide
to position coaxial jacks and
pre-mating high-current
plugs on male connectors
DIN 41612 M if the pins are
flow-soldered into PC boards.
protection
— during transport (if the
male connectors have
already been removed
from the packaging),
— during assembly,
— against soiling,
The gauges are held by
clamping in connector
body and protect the blade
contacts.
— during soldering.
Male Connector DIN 41612M
Item
Part No.
Setting gauge for types
M
1393494-9
M/2 1-1393494-0
M/3 1-1393494-1
Setting
Gauge
Note: These gauges can also be used to pro-
tect types C, C/2, C/3 and D.
PC Board
Wrench
Used to tighten the threaded ring on bulkhead
jacks Series 1.0/2.3
50.0
[1.97]
Ø 5.6
[0.22]
Item
Part No.
Wrench
1393488-3
1.0
[0.04]
Ø 6.7
[0.26]
1.0
[0.04]
Used to tighten the threaded ring on bulkhead
jack 1393670-8.
50.0
[1.97]
Ø 6.1
[0.24]
Item
Part No.
1.2
[0.05]
Wrench
1393488-4
Ø 7.3
[0.29]
1.5
[0.06]
50.0
[1.97]
Used to tighten the threaded rings 1-1393562-0
on bulkhead jacks Series 1.6/5.6.
40.0
[1.57]
Item
Part No.
Wrench
1393524-1
0.9
Movable
[0.04]
Ø 11.0 Ø 0.91
50.0
[0.43] [0.36]
[1.97]
1.35
[0.05]
265
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
www.tycoelectronics.com
RF Coax Connectors
Application Tooling (Continued)
Hand Tools
Pneumatic Tools
Tyco Electronics PRO-CRIMPER II Hand Tools are econ-
omy versions of our Tyco Electronics CERTI-CRIMP Hand
Tools, featuring ratcheted crimp control to provide full
die closure and help eliminate partial crimps. With an all
new design, the PRO-CRIMPER II hand tools require dra-
matically less hand force to produce the same connection
as comparable tools. Dies are interchangeable. It’s the
most versatile and reliable crimping tool in the mid-price
class. Recommended for networking installations, and
commercial, industrial and institutional maintenance work.
See Catalog 82276 for further information.
The 626 Pneumatic Tool System, as the name implies, will
apply a broad range of products in the 6-26 AWG [13-0.12
mm2] wire range. A basic 626 Pneumatic Tool System
requires a power unit, a tool holder, a crimp head assembly
and a die set when applicable. This premium system is well
suited for low- to medium- volume production and harness
assembly operations. Since the crimp head can be rotated
to any angle, the operator can also work on more difficult
terminations in confined equipment cabinets or enclosures.
Interchangeable tool holder assemblies and crimping
heads are available to crimp a variety of products.
Crimping heads for the earlier Model 2614 pneumatic
power unit can be used with the 626 Pneumatic Tool
System. If you are already using Tyco Electronics hand
tools, many crimp heads and die sets can be removed,
attached to an adapter with quick
pins and used with the
Typical PRO-CRIMPER III Hand Tool
No. 58433-1
for 50 Ohm BNC Dual
“O” Crimp Commercial
Connectors
626 Pneumatic Tool
System. An
adapter is even
available to
Tyco Electronics CERTI-CRIMP Hand Tools are our top-of-
the-line crimping tools featuring the original ratcheted crimp
control. All tools are designed to exacting specifications, and
manufactured using the highest quality materials to provide
long service life. Recommended for low production runs,
repairs and prototype work, and applications requiring con-
sistent, highly-reliable terminations. See Catalog 65780 for
further information.
accept lower
cost die sets of
the PRO-CRIMPER
II hand tool. For
more information,
order catalog 124208.
No. 189721-1
Bench Mount Assembly for
Pneumatic Tool System
(Optional)
Typical CERTI-CRIMP Hand Tools with Integral
(Non-Interchangeable) Dies
Fully adjustable stand allows
operator free use of both
hands — recommended for
maximum productivity.
No. 69477-1
for 50 Ohm BNC
Dual Crimp MIL Type
Connectors
No. 220015-1
for 50 Ohm N
Connectors
No. 856402-1
Battery Powered Crimp Tool
Take automatic crimping
away from the bench to the
product, with this convenient,
portable, battery-operated
tool. It’s at home in the
factory or in the field.
• Completely portable—
performs about 100
CERTI-CRIMP Hand Tool with Interchangeable Dies
No. 69710
crimps per charge
• Terminates wires to 10
AWG [6 mm2]
• Weighs only 1.57 kg [3.46
lb] including battery; 360
mm [14.2 in] long
• Pressure-sensitive cycle
Part Number 1725837-1
Part Number 1213890-1
control
• Kit includes tool, 2 batter-
ies, and charger
(Open Barrel)
266
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Application Tooling (Continued)
Bench-Mounted Machines
Stripping Tools
AMP-O-LECTRIC bench-mounted, semi-automatic
terminating machines may be used to apply RF products
such as Commercial BNC and TNC Connectors, Miniature
and Standard UHF Connectors, and Braid-Pic Contacts
and Terminals. The Model G unit features interchangeable
applicators, and is used to apply strip-form contacts. The
“Coax” unit is used to apply loose-piece contacts and
ferrules with dies that are mounted onto the machine.
See Catalog 65828 and Customer Manual 409-2627 for
further information.
The hand-operated Tyco Electronics Coaxial Cable
Stripper features interchangeable, color-coded blade cas-
settes and V-blocks to accommodate 2- or 3-step stripping
for cable diameters ranging from 2.54 [.10] through 7.62
[.30]. You strip cable by simply clamping and rotating the
tool around the cable. See Instruction Sheet IS 2766 for
further information.
For Use With
Tool No.
Connector Type
BNC Single Crimp
603995-1
603995-2
AMP-O-LECTRIC Model G,
No. 354500 Series with
Tyco Electronics Crimp
Quality Monitor
BNC Commercial and
UHF Miniature
UHF Standard
603995-3
603995-5
603995-6
BNC MIL Type Dual Crimp
BNC Commercial Dual Crimp
Semi-Rigid Cable Tooling
The tools listed here are designed specifically to strip and
terminate semi-rigid cable. These tools operate basically the
same as the flexible cable tools, in that they produce uni-
form terminations time after time, without heat damage from
soldering.
Hand Tool for BNC and TNC
Semi-Rigid Cable Connectors
No. 59980-1 Frame only—
does not include dies and locator
267
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Application Tooling (Continued)
Hand Tool Kit for SMA and Blindmate
Pneumatic Tool for Terminating BNC, TNC,
SMA and Blindmate Connectors
(for RG 402/U and RG 405/U Cable)
No. 58318-1*
Connectors
No. 59981-1
This pneumatic tool is a bench-mounted, semi-automatic
power tool designed for easy operation. The operator
needs only to depress the trigger to complete a termination.
It is used with the cable preparation machine to produce
finished terminations.
*Includes Locators 220241-1 and 308075-2. Dies are not included.
Part Numbers
Item Description
Military
(M22520/)
Tyco Electronics
Hand Tool
59980-1
36-01
Plug Locator
(without Center Contact)
220220-2
36-06
Plug Locator
220221-2
220222-2
312253-1
36-04
36-05
36-03
(with Center Contact)
Jack Locator
Die Set for RG 402/U Cable
(3.58 [.141] O.D.)
Die Set for RG 405/U Cable
(2.18 [.086] O.D.)
312253-2
36-02
Cutoff Fixture
311395-1
311396-1
312317-1
36-09
36-07
36-08
Cable Dressing Fixture
Trimmer Tool
Cable Bend Fixture Assembly
Includes following 6 items:
220224-1
311386-1
311386-2
36-10
36-11
36-12
Bend Segment, RG 402/U
(3.18 [.125] Radius)
Bend Segment, RG 402/U
(6.35 [.250] Radius)
Bend Segment, RG 405/U
Tool Holder
311386-3
311392-1
307581-1
312067-1
21027-6
13126-1
13127-1
36-13
—
Limiting Pin
—
Conforming Block
Hex Wrench
—
—
Carrying Case
Insert, Case
—
—
268
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Cable Assembly Capabilities
When your RF application
demands a high perform-
ance cable assembly,
make Tyco Electronics your
advantage. We specialize
in solving tough problems
with assemblies designed
and manufactured to
A Tyco Electronics custom
to specification and within
solution can be designed to your budget.
meet your special require-
ments — whether these
are related to return and
insertion loss, propagation
delay and phase matching,
shielding and EMI, or spe-
cial mechanical issues like
density, latching, appear-
ance, flexibility, or even
weight. We approach your
cable assembly individually,
using the vast resources
and knowledge gained from
years of experience gener-
ating custom solutions.
By making Tyco Electronics
your partner in cable
Tyco Electronics offers a
wide range of RF/Coax
Cable assemblies including
50 and 75 Ohm solutions,
from micro-miniature UMCC
and SSMT to high power
assemblies using N-Series
and DIN 7/16 connectors.
Furthermore, we use a
variety of cable types to
meet unique requirements
from standard military quali-
fied RG cable to low loss
foamed PE and PTFE tape
wrapped cable as well as
semi-rigid. Our engineering
experts will find the right
combination of materials to
provide a solution that is
cost effective.
the most demanding
requirements. Why
Tyco Electronics? Quite
simply, because we can
give you a comprehensive
engineered solution to your
application needs. By pro-
viding a precise match
between cable, connector
and application, we supply
cable assemblies that meet
your exact needs.
assembly design, you
reduce risk and gain the
assurance that you will
Every cable assembly
application is unique.
receive assembly on time,
269
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Cable Assembly Capabilities (Continued)
Utilizing network analyzers,
TDR, and intermodulation
test equipment to mention a
few, our testing capability
allows extensive electrical
and environmental charac-
terization of your assembly.
We offer full test capabilities
right in our manufacturing
facilities. Tests such as
an integral part of the man- Our cable manufacturing
ufacturing process:
centers are designed to
meet your production
requirements and delivery
needs. Our global loca-
tions, combined with
Tyco Electronics logistic
strengths assures you will
get the product where and
when you need it.
■ VSWR,
■ Return Loss,
■ Insertion Loss,
■ Phase matching,
■ Propagation Delay,
■ Impedance,
those listed below can be
■ Passive Intermodulation.
Norwood, MA
Ooskampt, Belgium
Product Development
Screw Machining
Plating
Connector and Cable
Assembly, Quick Turn
Product Management
Product Development
Screw Machining
Plating
Switzerland
Development Eng.
Screw Machining
Assembly
Harrisburg, PA
Product Management
Product Development
Prototyping, Samples
Diecasting
Tesla, Czech Republic
Assembly
Connector Assembly
Shenzhen and
Hangzhou, China
Stamping
Plating
Cable Assembly
Connector Assembly
Hermosillo,
Mexico
Taipei, Taiwan
Product
Management
Product
Development
Connector
Assembly
Cable Assembly
Brazil
Kunshan, China
Shanghai, China
Connector Assembly
Cable Assembly
Product Development
Screw Machining
Connector and
Cable Assembly
270
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Coaxial Cable Assembly Specification Guide
Please use this handy
reference guide when
specifying or building your
new cable assembly.
Heat Shrink (Optional)
A
B
Label (Optional)
Length
CONNECTOR A
CONNECTOR B
INTERFACE
STYLE
INTERFACE
STYLE
example: BNC, MCX, SMA, etc.
example: BNC, MCX, SMA, etc.
example: Straight Plug, Right-Angle Plug, Bulkhead Jack, etc.
example: Straight Plug, Right-Angle Plug, Bulkhead Jack, etc.
HEAT SHRINK
HEAT SHRINK
■
■
MARKING
MARKING
CABLE
OR
LABEL
■
LENGTH
RG TYPE
(inch/mm)
MARKING
CABLE MFG.
MFG. PART NO.
OR
ELECTRICAL SPECIFICATIONS
FREQUENCY RANGE
IMPEDANCE
(MHz/GHz) VSWR
OR
Ohms RETURN LOSS
dB INSERTION LOSS
dB DELAY
INSERTION LOSS
SHIELDING EFFECTIVENESS
TEMP. RANGE
(°C/°F) INSERTION PHASE
Watt INTERMODULATION
MAX. AVG. POWER HANDLING*
* 25°C at sea level and max. specified frequency
OTHER SPECIFICATIONS
271
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Appendix A - Theory and Application
In the following paragraphs we will discuss waves in greater
Theory and Application
detail, including the relationship of frequency and wave length,
how pulses are formed and used, how each differs from the
other and the problems involved in their transmission.
As a leading manufacturer of RF products, Tyco Electronics
produces a large variety of coaxial connectors. The proper
selection and application of these connectors requires a knowl-
edge of factors not involved in other types of connectors and
terminals. The following paragraphs have been prepared to
improve understanding of the theory behind RF connectors:
Sine Waves
An RF wave is a sine wave, meaning that it smoothly swings
from zero to a positive peak value, then back down past
zero to a negative peak value, then back to zero to com-
plete a 360 electrical degree cycle. The positive and nega-
tive peaks are always equal in amplitude. The two qualities
which characterize this type of wave are amplitude and fre-
quency (f). Figure 8 shows these two characteristics.
Amplitude refers to the peak value attained by the wave and
corresponds to voltage. Frequency refers to the number of
oscillations per second. For example, the sign wave in
Figure 8(B) has completed 12 cycles in one second.
Therefore, we would say that this wave has a frequency of
12 cycles per second or 12 Hertz. The time for one com-
plete cycle is defined as the period (T). The relationship
between the period and frequency is given by the equation:
Basic RF Theory1
RF energy travels by electromagnetic waves, and it is pri-
marily the frequency of these waves that we are interested
in. Briefly, if an oscillating voltage source is connected to a
cable, a continuous electromagnetic wave will propagate
along the cable. A sensor placed at some point on the
cable would indicate a varying voltage (E field) as well as a
current and magnetic field (H field) as the wave travels past
it. This is called an electromagnetic wave because both
electric and magnetic fields are varying. The wave shape is
initially determined by the variation of the source with time.
Figure 7 shows the radiant energy spectrum. Visible light,
radio, television, x-rays and Gamma rays are all phenome-
non of electromagnetic waves at different frequencies. This
introduction will treat only those that are generated by an
electrical source and propagated along a physical cable
or other transmission media. That is, frequencies above
zero and up to about 50 gigahertz.
f = 1 / T in Hertz
A
Peak
Positive
Amplitude
1The majority of the technical terms, relative to RF and coaxial cable and
connectors, used here-in and throughout this catalog are defined in the Glossary
(Appendix G) starting on page 301.
Peak
Negative
Amplitude
Frequency or
Wavelengths
One Cycle
Designation
Applications
0 - 29.9
KHz
VLF
(Very Low
Frequency)
Commercial AC electricity, deep
depth sounders, ultrasonic
grinders, sonic oscillators
B
No. of Cycles
30 - 299.9
KHz
LF
Shallow-to-medium depth sounders
(Low sonar
Frequency)
1
2
3
4
5
6
7
8
9
10 11 12
300 - 2999.9
KHz
MF
(Medium
Frequency)
Commercial AM radio broadcasting,
marine radio telephone, direction
finders
1 Second
3 - 29.9
MHz
HF
(High
Frequency)
Citizen band radio, amateur radio,
international broadcasting
Figure 8
Typical Sine Wave Characteristics
30 - 299.9
MHz
VHF
(Very High
Frequency)
VHF television (Channels 2 thru
13), commercial FM radio
broadcasting, amateur radio, fire
and police radio
The wave travels away from the generator at speeds approach-
ing the speed of light. When an electromagnetic wave travels in
a medium other than air or vacuum, the speed for the wave is
reduced by a factor of the square root of the dielectric constant
( ε. The velocity (v) of the propagation of a signal is given by:
300 - 2999.9
MHz
UHF
(Ultra-high
Frequency)
UHF television (Channels 14 thru
83), microwave ovens, aeronautical
radionavigation
3 - 29.9
GHz
SHF
(Super High
Frequency)
Microwave communications, marine
radar, aircraft tracking and
airborne radars
c
__
v=
ε
30 - 299.9
GHz
EHF
(Extremely High
Frequency)
Space communications, radio
astronomy
Where c is the speed of light, 3 x 108 m/sec or 1.18 x 1010
in/sec, and ε is the dielectric constant of the medium.
(See Table 1 for dielectric constants of various materials)
Notes:
1. KHz = Kilohertz (1 thousand cycles per second)
2. MHz = Megahertz (1 million cycles per second)
3. GHz = Gigahertz (1 billion cycles per second)
The wavelength of a signal is given by the formula
c
1.18 x 1010
__________ _________ inches
λ = v/f =
Figure 7
ε x f (GHz)
ε x f (GHz)
Radiant Energy Spectrum
See Figure 9
272
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Appendix A - Theory and Application (Continued)
Inches
1000
Notice that rise time is the time required for the pulse to
rise from 10% to 90% of its amplitude - not from zero to
maximum. Rise and fall time is perhaps the single most
important characteristic of a pulse in today’s high-speed
digital equipment. Figure 11 shows that the faster the rise
and fall time, the more pulses will fit in a given time frame.
100
10
1
A
0.1
Time
.001 GHz .01 GHz
.1 GHz
1 GHz
10 GHz
100 GHz
B
Frequency (MHZ)
TEFLON (E=2.03)
Figure 9
AIR (E=1.00)
Table 1.
Properties of Insulating Materials
Dielectric
Material
Dielectric
Operating
Constant
Temperature Range
_________
TFE
_________
__________________
-70 +250°C
-60 +80°C
Time
2.03
2.3
4.6-4.0
2.12
2.25
3.7
Polyethylene
Nylon
-40 +120°C
-65 +85°C
-40 +105°C
-65 +85°C
Figure 11
TPX
Polypropylene
Acetal
Pulse Rise and Fall Time
Pulses
The bit rate for a system is the maximum rate of pulses per
second that a system can process without causing data
errors. The maximum performance can also be specified
in terms of baud rate. The baud rate is defined as the
number of characters (bytes) that are transmitted per sec-
ond. Generally a character represents 10 bits (7 bits for
the information, one parity bit, and two for start and stop,
totalling 10).
The sine wave is most often used for communication
purposes where intelligence is imposed on the wave by a
variation in amplitude (amplitude modulation, AM) or by a
variation in frequency (frequency modulation, FM).
Pulses, on the other hand, are primarily used in computers
and digital instrumentation. Since pulses are generally used
for triggering purposes, the pulse rise/fall time, amplitude
and width are the most important. Figure 10 shows a pulse
and identifies these characteristics.
Now that we know why fast pulses are required, the next
problem is how to obtain faster rise times. A pulse is
made up of a great number of different frequencies, and
the more high frequencies a pulse contains, the faster will
be its rise time and the flatter will be its peak. To better
understand this, refer to Figure 12. At A, you will see a
fundamental frequency (1), its third harmonic (3), and the
resultant waveform (S3), which is a combination of 1 and
3. Although this does not yet resemble a square wave,
you will note that the rise time is decreased, and a dip
appears at the peak. At B of Figure 12, we have added
the fifth harmonic. Rise time is further decreased, and the
peak is beginning to flatten out. At C the seventh har-
monic has been included, and the resultant wave S7
begins to resemble a square wave. As more high fre-
quency harmonics are added to the waveform, it will more
closely resemble a square wave, and the squarer it
becomes, the faster will be the rise time.
Width
90%
90%
Amplitude
10%
10%
Fall Time
Repetition
Rate
Rise
Time
Figure 10
Pulse Characteristics
TPX is a trademark of Mitsui Chemicals America, Inc.
273
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Appendix A - Theory and Application (Continued)
Fast rise times and short pulse widths require high fre-
quency components.
Signal Integrity and Propagation
To explain how to maintain signal integrity, it is necessary
to review how the signal is configured in a cable and how
it propagates. Ignoring digital signals for this discussion
we will identify the issues that deal with the integrity of a
sine wave. Consider a coaxial cable consisting of an inner
conductor surrounded by a dielectric material and then an
outer conductor (See Figure 13). The outer conductor may
be a braid, a foil, or a solid metal.
Two frequent causes of digital signal degradation can be
(1) high capacitance of the transmission line and (2) impe-
dence mismatches of connector transmission line or I/0
devices. Selection of an impedance-matched connector
on a digital line, especially if short cable assemblies are
used, can be as important as connector selection for an
RF modulated line. Reflected pulses out of phase with
the original pulse can cause false signals or high error
rates in a digital system.
Outer
Conductor
Since pulses with fast rise times are necessary in high-
speed computers, any circuit element which could reduce
or attenuate high frequency response is undesirable.
A
d
D
S3=1+3
1
Dielectric
Material
Center
Conductor
Figure 13
3
Diagram of a Cable
An electromagnetic wave traveling in a coaxial cable pro-
duces an electric and a magnetic field between the inner
conductor and the outer conductor (Figure 14). The electric
(E field) is radial and varies in time. An alternating current
flows along the inner conductor and the outer conductor. An
oscillating magnetic field (H field) circles the inner conductor.
S3
B
S5=1+3+5
H
E
V
5
Figure 14
Electric field (E) and magnetic field (H)
belonging to the principal mode in a coaxial line.
S5
C
The alternating current on a conductor is not spread
throughout the conductor but is strongest at the surface
and decays exponentially at points further into the conduc-
tor. This is called the skin effect. At a frequency of 1MHz,
three skin depths is 0.0078” (95% of the current is within
three skin depths of the surface) and at 10GHz three skin
depths is 0.00078”. As a result, the current is on the outer
surface of the inner conductor and the inner surface of the
outer conductor over the entire range of interest for most
RF systems. The dimensions and material beyond several
skin depths have no effect on the wave; gold plated plastic
will propagate as well as gold plated copper at sufficiently
high frequencies.
S7=1+3+5+7
7
Figure 12
Development of a Square Wave
274
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Appendix A - Theory and Application (Continued)
Attenuation
Reflections
A wave loses energy (attenuates) in several ways: (1) The
When the characteristic impedance changes in a transmis-
resistance of the inner and outer conductors is small but can sion line system, part of an incident wave is reflected. The
be significant over long lengths and will produce some heat. reflection coefficient can be calculated as:
(2) The dielectric may be lossy; its resistance is high but not
Vi
Z - ZO
_____ __R_____
infinite, and some energy is lost. (3) Electromagnetic energy
radiates at high frequencies; significant energy losses are
caused by radiation of electromagnetic energy (the cable
acts like an antenna). (4) Energy is reflected due to
impedance mismatches. The combination of these four
types of losses are referred to as the insertion loss of a
transmission line system. Connectors have similar losses.
Reflection Coefficient = ρ=
=
VR
ZR + ZO
Where Vi and ZO are the incident voltage and impedance
of the first media. VR and ZR represent the reflected voltage
and impedance of the media that caused the reflection.
The decibel loss due to reflection is given by:
Characteristic Impedance
1
____
A parameter which defines the behavior of a cable,
connector, or any propagating system is Characteristic
Impedance, Zo. The characteristic impedance of a loss-
less cable is related to the inductance per unit length, L,
and the capacitance per unit length, C, as follows:
Return Loss = 10 Log10
(
) dB
1-ρ 2
VSWR
The traditional way to determine the
reflection coefficient is to measure
the standing wave caused by the
superposition of the incident wave
and the reflected wave. Traditionally
the voltage is measured at a series
of points using a slotted line. The
ratio of the maximum divided by the
minimum is the Voltage Standing
Wave Ratio (VSWR). The VSWR is
infinite for total reflections because
the minimum voltage is zero. If no
reflection occurs the VSWR is 1.0.
VSWR and reflection coefficient are
related as follows:
Zo = L/C in ohms
The equivalent circuit of a transmission line is shown in Figure
15. R represents the conductor resistance for a unit length
For a coaxial cable the characteristic impedance is given by:
D
138
Zo =
x Log10
in ohms
ε
d
where D is the inner diameter of the outer conductor and
d is the outer diameter of the inner conductor, respectively.
Similar equations apply for other geometries such as two
parallel wires.
VSWR = (1 + ρ)/(1 - ρ)
L
R
Most present instrumentation
measures the reflection coefficient
and calculates the VSWR.
Figure 16 represents the direct
relationship between VSWR and its
equivalent in return loss
C
Z0
(expressed in dB).
Figure 15
Typical Transmission Line Schematic
Figure 16
VSWR vs. Return Loss
The maximum power is transferred between two systems if
they have the same impedance. This is called impedance
matching. However, impedance variations that are short
compared to a wavelength can have a negligible effect on
signal loss.
Multiple Reflections
If there is a series of impedance changes, each one will
have a reflection coefficient. The total reflection coefficient
is the vector addition of each of the individual coefficients
accounting for the distance between reflections and the
reflection of any reflected waves. Even though the calcula-
tions are difficult, a total VSWR can still be measured.
Standard impedances are 50 ohm, 75 ohm and 93-125
ohm. Most systems use 50 ohm because it is a compro-
mise between maximum power transmission and minimum
line loss. The telephone industry and the broadcast indus-
try use 75 ohm for minimum line attenuation. The need for
low capacitance instrumentation cable has produced the
93-125 ohm systems. The higher impedances are gener-
ally achieved by changing the conductor diameters and by
modifying the dielectric material to add air.
Multiple reflections can produce a resonance phenomenon
that is unique to wave theory. Properly understood some
serious difficulties can be avoided. An example will make
the point clear. Consider an electromagnetic wave with a
275
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Appendix A - Theory and Application (Continued)
wavelength of 4 inches traveling on a cable that changes
Reflections of Digital Signals
from 50 ohms to 25 ohms. The reflection coefficient is -.33,
which means that one third of the incident voltage is reflected
toward the source. Assume that one inch (one quarter wave-
length) down the cable the impedance changes back to 50
ohm. Again, one third of the wave is reflected, but without
any phase shift. It travels back to the first interface where one
third of this reflected wave is reflected back toward the sec-
ond interface. Two thirds of the wave is transmitted through
the interface and travels back to the source. Since the first
(reflected) wave is shifted 180 degrees at the reflection, and
the second (transmitted-reflected-transmitted) wave is shifted
180 degrees because it traveled the one inch separation
twice, the two waves are in phase. The net result is that the
VSWR is much larger because the length of the 25 ohm sec-
tion was just the right length to cause a resonance. If the
length of the 25 ohm section had been one half wave-
length, the two waves would have interfered and the VSWR
would be at a minimum.
The previous discussions dealing with attenuation,
reflections and standing waves can apply to digital signals
with some extra thought.
A single pulse can be thought of as a combination of high
frequency sine waves. The maximum frequency component
in a square wave pulse can be calculated by this equation:
f = 0.35/rise time
where
f = GHz when “t” is in nanoseconds
Attenuation of the frequencies necessary to support the short
risetime will produce a slower rise and possibly prohibit the
pulse from ever reaching the detector. This ‘slurring’ of the
pulse is similar to the behavior of an RC circuit and the
attenuation is sometimes called capacitive attenuation.
A series of pulses can demonstrate resonance. If a
portion of a pulse is reflected at each interface, it is possi-
ble for them to come together and add up to form a new
phantom pulse.
The critical frequency here is the bit rate. Think of a sine
wave with a frequency the same as the bit rate; if it will
resonate in the cable, the pulses will also. Extra pulses
caused by resonance might easily result in an error signal
from the receiving system requesting a retransmittal. The
final result would be a communication system that is much
slower than intended.
λ
/
4
V in
V out
50 Ω
50 Ω
25 Ω
λ
/
4
.66V
.22V
1 V out
.44V
Cut-off Frequency
The cut-off frequency of a coaxial transmission line is the
frequency at which modes of energy transmission, other
than the “TEM” mode, can be generated.
.33V
.15V
.07V
7.5
fco =
(in GHz)
ε (D+d)
(D and d are measured in inches)
Impedence
Mismatch
Types of Transmission Lines
Twin Lead transmission cable is generally used where
impedance matching alone is important, since it provides
only minimal shielding. Impedance values of 300 ohms
and 600 ohms are common. Lower impedance values
require closer spacing of the conductors and are not nor-
mally available in this type of cable. A typical application for
twin lead cable is in antenna lead wire for television sets.
V in = 1 Volt VR =.48 Volt
V out =.52 Volt
Figure 17
Multiple Wave Reflections
(Caused by Impedance Mismatch)
In summary, avoid cable lengths, printed circuit board
paths, or connectors that are multiple of one quarter (λ/4,
3λ/4, etc.) of the intended signal transmission wavelength.
Coaxial cables, when manufactured, also have periodic
variations in diameter that result in periodic changes in
impedance (Zo), that can cause significant levels of
reflected signal (high return loss) at specific frequencies.
Twisted Pair is a variation of the twin lead type. It consists
of two lengths of ordinary hookup wire twisted together.
A twisted pair provides relatively constant impedance plus
better magnetic shielding than twin lead cables. It is flexi-
ble, inexpensive, easy to terminate and is used extensively
by the computer industry. However, it should not be used
when maximum shielding is required.
276
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Appendix A - Theory and Application (Continued)
Shielded Twisted Pair Cable is used to eliminate inductive Often you will hear the term “shielded cable”. This is very
and capacitive coupling. Twisting cancels out inductive
coupling, while the shield eliminates capacitive coupling.
Most applications for this cable are between equipment,
racks and buildings.
similar to coaxial cable except the spacing between center
conductor and shield is not carefully controlled during
manufacture, resulting in non-constant impedance.
Semirigid Coaxial Cable uses a solid tubular outer
conductor rather than the braided type, so that all the RF
energy is contained within the cable. One of the draw-
backs of braided cable is that the shielding is not 100%
effective, especially at higher frequencies. This is because
the braided construction can permit small amounts of short
wavelength (high frequency) energy to radiate. Normally
Flexible (Braided) Coaxial Cable is by far the most
common type of closed transmission line because of its
flexibility. It is a coaxial cable, meaning that both the signal
and the ground conductors are on the same center axis.
The outer conductor is made from fine braided wire, hence
the name “braided coaxial cable”. This type of cable is
used in practically all applications requiring complete shield- this does not present a problem; however, if a higher
ing of the center conductor. The effectiveness of the shield-
ing depends upon the weave of the braid and the number
of braid layers. Tyco Electronics manufacturers connec-
tors for cable sizes ranging from less than 1/8 in. diameter,
for low power applications of around 50 watts, to over 1/2
in. diameter for power of 850 watts at 100 MHz and volt-
ages up to 5000. In addition to power handling capabili-
ties, cables are available for high frequency applications,
high and low temperature applications, severe environ-
mental applications and many other specialized uses.
degree of shielding is required, semirigid coaxial cable is
recommended. For applications using frequencies higher
than 30 GHz a miniature semirigid cable is recommended.
Various connectors are available from Tyco Electronics to
terminate these cables.
Ribbon Coaxial Cable is a relatively recent Tyco Electronics
innovation which combines the advantages of both ribbon
cable and coaxial cable. Tyco Electronics currently pro-
vides both the cable and the insulation displacing coaxial
connector to terminate the cable. Each individual coaxial
cable consists of the signal conductor, dielectric, a foil
shield and a drain wire which is in continuous contact with
the foil. The entire assembly is then covered with an outer
insulating jacket. The unique manufacturing feature of this
cable is the precise placement of the drain wires to permit
gang stripping of the outer jacket and foil. The major
advantage of this cable is the speed and ease with which it
can be mass terminated with the Tyco Electronics insulation
displacement technique. They can also be separated into
individual coaxial lines and terminated with standard coax-
ial connectors as required.
Triaxial Cable is used when higher “shielding” efficiency
characteristics are required in applications similar to those
using shielded twisted pair cable.
Signal
Outer Conductor
Conductors
Insulation
Outer Conductor
Dielectric
Dielectric
Signal
Conductors
Middle Conductor
Dielectric
Insulation
Figure 18
Twin Conductor and Triaxial Cable
-1000
9
8
7
6
5
4
-300
-200
Triax
Double Braid
-100
-80
-60
-40
Single Copper Braid
-30
-20
-10
.01 GH
.1 GH
1 GH
z
10 GH
z
z
z
Figure 19
Shielding Efficiencies
277
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Appendix B - White Bronze
High Quality Surface
Plating & Excellent
Intermodulation
Performance for RF
Connectors
Product Facts
■ Low intermodulation
■ High corrosion resistance
■ Low porosity
■ Low RF losses
■ Wear and scratch resistance
Tyco Electronics’ industrial electroplating facilities is one of the most advanced in the world.
The Tyco Electronics White
Bronze surface finish repre-
sents a dramatic improve-
ment upon the wear
has properties undesirable
in many RF applications;
including, high RF and
insertion losses, poor inter-
modulation performance,
The Tyco Electronics White
Bronze is similar in compo-
sition and performance to
other copper/tin/zinc alloys
developed in the industry
such as Sucoplate® and
BBR.
characteristics and life
expectancy of silver plating, high permeability and poor
at the same time offering a
far better electrical perform-
ance than nickel. White
Bronze plated connectors
exhibit intermodulation
characteristics significantly
better than stainless steel
or nickel plated products.
Silver has always been the
preferred finish from an
electrical standpoint but its
corrosion and wear charac-
teristics especially in harsh
conditions are often unac-
ceptable. While nickel is an
extremely rugged finish it
screening effectiveness.
The Tyco Electronics White
Bronze is composed of
copper, tin and zinc which
are applied simultaneously
to produce a finished color
similar to stainless steel.
With one of the most
advanced industrial electro- formed to the specifications
plating facilities in the world of the European and
Tyco Electronics can
achieve the levels of control standards — CECC
Comprehensive condition-
ing tests have been per-
formed to provide a
thorough evaluation of The
Tyco Electronics White
Bronze plated connector
bodies. The tests were per-
Need more information?
Call Technical Support
Center at 1-800-522-6752
for product and tooling
information.
International RF connector
over the complex galvanic
process necessary in the
application of this alloy.
22000/IEC 68-2-14/
IEC 169-1. The results are
summarized on page 280.
The Technical Support
Center is staffed with
specialists well versed in all
Tyco Electronics products.
The Center can provide
you with:
Deposit Characteristics
■
■
■
■
■
Engineering Support
Catalogs
Technical Documents
Product Samples
Tyco Electronics
Composition — Copper (55-60%),
Tin (20-25%), Zinc (15-20%)
Density — 7.9-8.1 g/cm3
Hardness — 300-380 HV
Authorized Distributor
Locations
Tyco Electronics Internet
Home Page:
www.tycoelectronics.com
Passivation — Immersion Chrome
■
Sucoplate® is a plating trademark for
Huber & Suhner.
BBR is a plating trademark for Radiall.
278
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Appendix B - White Bronze (Continued)
phides etc., neither is there
Bronze plated connectors
in contact with stainless
steel, silver, nickel or nickel
containing finishes carry no
risk of corrosion as a result
of any chemical potential
difference.
Low Intermodulation
Products
Dissimilar metals, finishes
and discontinuities within a
coaxial line structure give
rise to Intermodulation
any build up in oxide layers
as is the case with nickel.
Furthermore, White Bronze
parts have successfully
passed all international salt
spray tests (MIL, BS,
Products (IMP). This is of
particular concern in appli-
cations requiring low levels
of intermodulation, such as
cellular base stations and
antennas. White Bronze
plated connectors offer bet-
ter IMP performance and
lifetime characteristics than
nickel. Due to the similarity
of electrolytic potentials and
the non magnetic proper-
ties of the finish, levels of
intermodulation are com-
mensurate with silver and
far in excess of stainless
steel/nickel connectors. At
the same time the excellent
wear characteristics and
durability of the finish
CECC, IEC).
In conditions of continu-
ously high temperatures
(>100°C) and/or excessive
humidity (>100%) there is
no build up of foreign layers
which may affect contact
resistance.
Low RF Losses
The relative permeability
(µr) of the Tyco Electronics
White Bronze is 1 giving
rise to low RF losses even
at high frequencies. As a
direct result of the good
conductivity of the finish,
skin depth is minimized fur-
ther reducing insertion loss
and ensuring a better
Low Porosity and No
Reaction with Contact
Surfaces
impedance match across
the frequency range of the
connectors.
Less than 2µm of White
Bronze is needed to create
a completely nonporous,
corrosion resistant surface.
Tyco Electronics applies
White Bronze to a thickness
of between 2µm and 3µm.
This compares favorably
with the typical plating
thickness of nickel (>10µm)
and consequently, varia-
tions in plating depth are
significantly less.
Non Magnetic Finish
The Tyco Electronics White
Bronze contains no ferrous
materials and so has no
magnetic properties. This is
particularly desirable in
many RF applications.
ensure that the intermodula-
tion life of the connector is
greater than silver. The life
is also improved as a direct
result of the excellent corro-
sion resistance properties
of White Bronze; thereby
minimizing metal/metal
Wear and Scratch Resistant
The hardness of the
White Bronze does not alloy
with brass and since its
coefficient of expansion is
virtually identical to that of
brass, rapid temperature
shocks (-50°C/200°C) do
not cause blistering or
oxide junctions.
Tyco Electronics White
Bronze at 300-380HV is
more than double that of sil-
ver and marginally harder
than platings containing
nickel. This gives a scratch
resistance which is rarely
surpassed and makes it
ideal for high mating
Highly Corrosion Resistant
Even under continuous
exposure to harsh environ-
ments White Bronze retains
its aesthetic appearance.
Unlike silver it does not
discolor when exposed to
sulphur, potassium sul-
cracking of the plating.
The electrolytic potential of
White Bronze is approxi-
mately that of brass.
applications.
Consequently, any White
279
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Appendix B - White Bronze (Continued)
Plating. Contact resistance
Test 3 - Soldering Heat
Low Coefficient of Friction
measured after matings
and sulphur dioxide expo-
sure was less than 5%
(0.23mohm) of the permissi-
ble specification.
3.1 Resistance to Soldering
Heat Exposure to concen-
trated soldering heat
(250°C) for 10 seconds to
evaluate any possible dete-
rioration in plating finish.
No deterioration detected.
The coefficient of friction
is approximately 70% that of
silver to give lower insertion
forces and smoother
coupling. These properties
combine to produce a
harder wearing, longer last-
ing finish which prolongs
connector life and reduces
the ongoing cost of
1.2 High Temperature
Endurance Exposure to
temperatures of 85°C 5°C
for 250 hours, to determine
the impact of prolonged
high temperatures on plating
adhesion. Prior to testing
the connectors were subject
to 500 matings. Results
showed no visual deteriora-
tion in plating finish (blister-
ing, cracking etc.) and the
results of outer conductivity
performance were compara-
ble to Test 1 (above).
White Bronze is available on all
products, including 7-16, N, TNC,
OSP and SMA.
Test 4 - Salt Mist &
Mechanical Endurance
ownership.
4.1 Salt Mist
Exposure to salt mist spray
(as defined in BS 2011 Pt.
2.1 Ka) for 48 hours to eval-
uate the uniformity of pro-
tective coatings, any visual
deterioration, or impact on
electrical performance. No
visual deterioration, outer
conductivity performance
were comparable with Test
1 (above).
Tyco Electronics’ White
Bronze
Environmental Test
Four groups of conditioning
tests were performed to pro-
vide a comprehensive evalu-
ation of the Tyco Electronics
White Bronze plated con-
nector bodies. The tests
were performed to the spec-
ifications of the European
and International RF con-
nector standards - CECC
22000/ IEC 68-2-14/IEC 169-
1. Full details and relevant
data are available from
Test 2 - Rapid Temperature
Change & Damp Heat
4.2 Mechanical Endurance
Electrical and visual evalua-
tion of the connectors after
500 matings to determine
any electrical or visual
deterioration. No visual
deterioration, outer conduc-
tivity performance were
comparable with Test 1
(above).
Steady State
2.1 Rapid Temperature
Change Exposure to -55°C
and +85°C for 15 minutes,
transition time 2-3 minutes,
50 cycles. To determine
possible plating deteriora-
tion caused by prolonged
and rapid temperature
Tyco Electronics and results
are summarized below.
Test 1 - Industrial Atmosphere
& Temperature
change. No visual deterio-
ration, outer conductivity
performance were compa-
rable with Test 1 (above).
Availability and Ordering
Endurance
Tyco Electronics offers
White Bronze on all prod-
ucts including 7-16, N,
TNC, SMA and OSP.
For more information on
White Bronze contact your
local Tyco Electronics Sales
Office.
1.1 Industrial Atmosphere
Exposure to Sulphur Dioxide
Atmosphere (as specified in
IEC 68-2-42 Test Kc) for 21
days of mated connectors,
previously subjected to 500
matings, to determine the
influence of sulphur dioxide
on the corrosion resistance
properties of White Bronze
2.2 Damp Heat Steady
State Exposure to 93% rel-
ative humidity (at 40°C) for
10 days. To determine plat-
ing adhesion. No visual
deterioration, outer conduc-
tivity performance were
comparable with Test 1
(above).
280
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
specified. Values in brackets
are standard equivalents.
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Appendix C - Intermodulation in RF Coaxial Connectors
Product Facts
■ High quality plating to 6µm
for IM-sensitive products
■ Restrict materials to copper
and its alloys
■ Avoid the use of stainless
steel, nickel, ferrites, etc.
in the signal path
■ Quality machining
■ Ensure, by design, a prop-
erly defined contact inter-
face at connector, panel and
contact interfaces
■ Avoidance of crimps
The increased demand from the mobile
communication industry to provide greater
channel capacity coupled with the increased
sensitivity of receivers has exposed a condi-
tion within RF Coaxial Connectors referred to
as Intermodulation Distortion (IMD). This
condition occurs when non-linearities within
the connectors act as imperfect diodes to
generate other frequencies known as
Intermodulation Products (IMP). Some of
these frequencies appear within the receive
band and effectively block the channel. The
purpose of this application note is to outline
the basic causes of Intermodulation and the
techniques Tyco Electronics has undertaken
to minimize this condition.
160 dBc to -163dBc (when working in dBc)
or -120dBm (when working in dBm), both
with 2 x (+43dBm) tones. The requirement
is so stringent because the connectors are
used in post-filtering sections of the transmit
path (between the diplexer and the
antenna) and also because the system is a
full duplex system where the multiple-carrier
transmit path is also the receive path. In a
truly linear system, the output is directly
proportional to the input, following the form
of y=mx+c (see fig. 2). Coaxial connectors
have traditionally been viewed as following
this pattern. In reality, there have always
been non-linearities present in coaxial con-
nectors. These were not readily apparent as
the resultant IM products were significantly
below the noise floor of the system due to
relatively weak carrier signals. This situation
becomes apparent when the incident power
is raised above 30 dBm.
IM Basics
Modern developments in base stations for
GSM, DCS 1800 and PCS 1900 have
necessitated the use of “7-16”, “4.1/9.5”
and “N” connectors due to the increased
power requirements. The requirements for
performance are typically in the order of -
Need more information?
Call Technical Support at
the numbers listed below.
The small non-linearities have a character-
istic similar to a square-law (see Fig 3). The
distortion to the waveform is evident, the
Technical Support is staffed
with specialists well versed
in all Tyco Electronics
products. They can provide
you with:
■ Technical Support
■ Catalogs
Linear vs. Non-linear Response
Fig. 2
Fig. 3
12
10
8
120
Linear
Non-linear
100
80
■ Technical Documents
■ Product Samples
■ Tyco Electronics
Authorized Distributor
Locations
6
4
2
0
60
40
20
0
281
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Appendix C - Intermodulation in RF Coaxial Connectors (Continued)
IM Basics (Continued)
Spectrum of products in a 2-tone system
positive 1/2 cycle being significantly greater in amplitude
than the negative 1/2-cycle. When converted to the fre-
quency domain, this waveform consists of the desired fun-
damental plus a decaying series of related harmonics that,
in themselves, interact with other carriers present on the
transmission line.
%
120
Fig. 4
Carriers
F1
100
80
60
40
20
0
F1
Rx band
Tx
The effect of this interaction produces additional frequen-
cies, some of which occur where they are least wanted
(see fig. 4). The 2F1-F2 (3rd order IMP), 3F1-2F2 (5th order
IMP) and 4F1-3F2 (7th order IMP) products can all mani-
fest in the receive band and, if sufficiently large, effectively
block a channel by making the base station receiver think
that a carrier is present when one is not.
band
2F1-F2
3F1-2F2
4F1-3F2
2F2-F1
3F2-2F1
4F2-3F1
Frequency (MHz)
Potential causes of IM in Coaxial Connectors
There are numerous factors which can affect intermodula-
tion performance in RF coaxial connectors. Identified
below are the most likely sources of concern:
■
■
■
■
■
■
Magnetic materials in the signal path
Low contact pressure
Less than 360-degree contact
Poor surface finish
■
■
■
■
Contaminated plating solution
Insufficient plating thickness
Corrosion
Debris and dust within the connector
Convoluted signal path
Dissimilar metals in intimate contact
Remedies for IM in RF Coaxial Connectors
To combat the above identified IM sources, Tyco Electronics
undertakes precautions during the design and manufacture of
the product, as summarized below:
Effect of surface roughness
Fig. 5
■
1.5
High quality plating to 6µm for IM-sensitive products
Metal
The plating must also be free from contaminants and properly
passivated with a chromate passivate. Silver has been the
preferred plating material as it possesses the lowest practical
resistivity thereby minimizing interface contact resistances.
Tyco Electronics also offers a unique White Bronze plating
finish which provides excellent durability, tarnish resistance
and non-magnetic properties ideal for low intermodulation.
During testing with a system noise floor of -145 dBm, the differ-
ence in performance between the Tyco Electronics silver-plat-
ing and the Tyco Electronics White Bronze finish is not
1
Oxide
Air
0.5
0
-0.5
-1
Signal flow
-1.5
discernible (refer to White Bronze Application Note 1307057).
■
Restrict materials to copper and its alloys.
same effect as a poor panel contact (see fig. 5). For IM-sensitive
designs Tyco Electronics ensures 0.4µm is the maximum.
This ensures maximum plating adhesion and minimum electro-
chemical potential difference between the base materials and
their over-platings.
■
Contact design
This primarily affects the connector interface. Repeated
matings can generate small amounts of plating from the indi-
vidual parts. These oxidize and interfere with the mechanical
(and therefore electrical) mating of connectors. The oxidized
debris gives further rise to metal and surface oxide junctions
and consequently, higher IM products.
■
Avoid the use of stainless steel, nickel, ferrites, etc. in the
signal path
Magnetic and para-magnetic materials will only compound
non-linearites and give poorer interface contact resistances.
During experimentation, Tyco Electronics discovered a degra-
dation in performance of 20dB when nickel plate was used.
The presence of magnetic or para-magnetic materials will also
cause the forward IMP figure to differ from the reverse IMP.
■
Ensure, by design, a properly defined contact interface at
connector, panel and contact interfaces
Insufficient contact force will give rise to metal to oxide junc-
tions. The classic rectifiers were metal oxide by composition.
■
Quality machining
Surface finish is paramount. The signal propagates within a
“skin” if this skin is too rough, the signal will repeatedly transition
through metal and surface oxide layers, thereby creating the
Axial maximum material condition at the connector interface is
critical in order to ensure minimum mismatch and maximum
282
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Appendix C - Intermodulation in RF Coaxial Connectors (Continued)
Remedies for IM in RF Coaxial Connectors (Continued)
■
potential of a butt-contact. Panel interfaces generally concern the
physical contact of the connector body to the panel. In this case,
it has been determined that a protruding feature as close as
possible to the body bore will give the best IM performance. The
applied mounting force is concentrated in the surface area of the
protrusion which, on engagement with the panel, punctures the
existing oxide layer to give a metal-to-metal, gas-tight junction.
Avoidance of crimps
Crimps, by nature, can only give multiple point-contact rather
than 360-degree contact and also cause a variability in the
position of electrical contact during dynamic testing. IM prod-
ucts will therefore be greater. It has been found that soldered
center contacts and clamp/solder outer contacts give the best
static and dynamic IM performance.
Improving IM Connector Design
Tyco Electronics continues to pursue design techniques which
improve intermodulation performance to address emerging
telecommunication market needs. A state of the art intermodu-
lation test facility and participation on the international (IEC
SC46D WG5) committee to develop standard test practices
ensures our commitment to the understanding of intermodula-
tion characteristics. This applied technology base is instrumen-
tal in developing innovative low intermodulation products for
7-16, Type N, SMA and OSP interfaces.
Most commonly asked questions regarding Intermodulation
Why is intermodulation such a concern for cellular
Are there ways to test for intermodulation in an RF coaxial
1. infrastructure equipment?
5. connector?
The primary concerns for cellular service providers today
are channel efficiency and clarity of transmission. Growth in
demand for mobile communications has created a need to
operate equipment at greater capacities and reliability to
service the competitive market. Intermodulation degrades or
limits the ability of the service provider to operate at optimal
levels of performance and may ultimately cause subscribers
to experience poor call quality. Intermodulation has become
an important factor in system selection to ensure the best
possible network service.
Yes, very sophisticated methods are needed to test for inter-
modulation in RF connectors. The test system must utilize
extremely sensitive filtering or clean amplification so that the
equipment itself has a very low intermodulation noise floor.
There is not yet a standardized approach to testing, although
an international committee has been formed in the connector
industry to address the situation. Tyco Electronics has a state
of the art test facility where our designs are optimized for low
intermod performance and where further analysis on the
effects of this phenomena can be studied.
Where is intermodulation most likely to occur in cellular
Is intermodulation in coaxial connectors frequency
2. infrastructure equipment?
6. dependent?
Intermodulation is typically of greatest concern between the
filtering elements of the system and the antenna. The introduc-
tion of higher power levels for the transmit side of the equip-
ment creates greater potential for intermodulation to occur.
This is why the majority of focus for intermodulation concerns
7-16, Type N, SMA and 4.1/9.5 connector interfaces.
No. Because coaxial connectors are broadband devices there
is no frequency dependency. Some apparent variability can
be detected during testing but this is not due to the connector.
The impedance matches of the output diplexer/triplexer and
terminations are the causes of the variations and should not
be incorrectly attributed to the connector/assembly.
Tyco Electronics Interconnect Business Unit has demonstrated
that by varying the impedance match of the test station termi-
3. Is intermodulation a recent development?
nation, a DUT can show 15dB better IMP than exists in reality.
3
Intermodulation has always been inherently present in RF coax-
ial connectors but may be relatively imperceptible in some
devices for a variety of reasons. The amount of power applied
to an RF connector determines the relative IM threshold which
can be observed. Intermodulation is therefore more likely to
cause concern in a higher power system, for example, utilizing
a 7-16 connector interface rather than an equivalent low power
OSX solution. The trend toward higher power digital cellular
systems creates the need for greater intermodulation sensitivity.
IMP3 in mixers follows a 3dB/dB relationship.
7. What is it for connectors?
The relationship is identical. Taking the 3rd order (2F1-F2):
varying the power of F2 gives an IMP relationship of 1dB/dB
3
whereas varying the power of F1 gives a relationship of 2dB/dB
as the IMP is derived from the 2nd harmonic of F1. This gives a
total of 3dB/dB when symmetrically varying both carrier powers.
I am buying a complete cable assembly from
8. Tyco Electronics. How do I interpret the IMP result now?
What is the best method of cable attachment for IM sensi-
4. tive cable assembly applications?
With caution! It is the Tyco Electronics policy when testing
devices to move away from the normal static test to a dynamic
test where the cable termination interfaces are mechanically
exercised during live IM conditions. It is also a good indicator
to customers of the build quality of the assemblies. A dynamic
evaluation has shown 15dB degradation in IMP performance
for poor assemblies and even as much as 50dB for bad
ones.It is therefore strongly advisable that IM performance fig-
ures are stated in the context of a dynamic measurement.
Soldering and clamping are preferred methods due to the
360-degree point of contact created at the cable to connector
interface. Such intimate contact improves the overall contact
resistance leading to improved IM characteristics. In addition,
it is also better to solder the center conductor of the connector
to the cable versus crimping due to the improved contact
resistance path and elimination of voids.
283
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Appendix D - Typical Coaxial Cable Specifications
SCCad Br......Silver covered cadmium bronze
GS.................Galvanized steel
TCCS ............Tin copper covered steel
SSC ..............Silver covered strip
HR.................High resistance wire
SA.................Silver covered alloy
Abbreviations
Dielectric
PE .................Solid polyethylene
PTEE .............Solid polyetrafluoroethylene
PIB................Polyisobulylene, Type B, per MIL-C-17
Rubber ..........Per MIL-C-17D
Sil .................Silicone rubber
Jacket Material
PVC-I............Black polyvinylchloride, contaminating, Type I, per MIL-C-17D
PVC-II...........Gray polyvinylchloride, noncontaminating, Type II, per MIL-C-17D
PVC-IIA.........Black polyvinylchloride, noncontaminating, Type IIA, per MIL-C-17D
PE-III.............Clear polyethylene
PE-IIIA ..........High molecular weight, black polyethylene, Type IIIA, per MIL-C-17D
FG Braid V ....Fiberglass, impregnated, Type V, per MIL-C-17D
FEP-IX ..........Fluorinated ethylene propylene, Type IX, per MIL-C-17D
PUR ..............Polyurathane, black specific compounds
PS.................Polystyrene
Conductors and Braid Materials
AL .................Aluminum
SCAAI ...........Silver covered copper covered aluminum
BC.................Bare copper
SC.................Silver covered copper
CCS ..............Copper covered steel
TC.................Tinned copper
SIL/DAC-VI...Dacron braid over silicone rubber, Type VI, per MIL-C-17D
Rubber ..........Per MIL-C-17D
SCCS............Silver covered copper covered steel
Max.
RG/U
Type
Cable
Number/Type
DOD of Shielding
Braids
Nom.
Imped.
(Ohms)
Nom.
Cap
pf/ft
Max.
Operating
Temp. (C°)
Inner
Conductor
Dielectric
Material
Jacket
Material
Weight
(lb/ft)
Operating
Voltage
O.D.
Comments
(Volts RMS)
0.81 BC
.295
2/BC
.116
5.74
4
5
PE
PE
PE
PE
PE
PE
PVC-1
PVC-1
PVC-II
PVC-IIA
PVC-II
PVC-IIA
PVC-I
.025
.088
.088
.087
.081
.082
.080
50
52.5
50
30.8
28.5
30.8
30.8
20.0
20.6
12.5
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
1900
3000
3000
3000
2700
2700
1000
Use RG 58C
.0320
.226
1.29 BC
.0508
1.29 SC
.0508
1.29 SC
.0508
0.72 CCS
.0285
0.72 CCS
.0285
0.91 BC
.0359
4.7
8.43
.332
8.33
.328
8.33
.328
8.43
.332
8.43
.332
9.4
.370
Use up to
100 MHz
2/BC
.185
4.6
5A
5B
6
2/SC
.181
Use RG 212
Use RG 212
Use RG 6A
4.6
2/SC
.181
50
4.7
.185
2/Inner SC
Outer BC
76
4.7
.185
2/Inner SC
Outer BC
Good Attenuation
Stability
6A
7
75
Air-Space
PE
6.35
.250
1/BC
95
Use RG 63B
2.17
.0855
7.24
10.29
8
8A
9
PE
PE
PE
PE
PE
PE
PE
PE
PE
PE
1/BC
PVC-I
PVC-IIA
PVC-II
PVC-II
PVC-IIA
.106
.106
.140
.140
.150
.146
.146
.096
.096
.141
52
52
51
51
50
52
52
75
75
75
29.5
29.5
30.0
30.0
30.8
29.5
29.5
20.6
20.6
20.6
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
4000
5000
4000
4000
5000
4000
5000
4000
5000
4000
Use RG 213
7/0.72 BC
.0285
.285
.405
2.17
.0855
7/0.72 BC
.0285
2.17
.0855
7/0.72 SC
.0285
2.17
.0855
7/0.72 SC
.0285
2.17
.0855
7/0.72 SC
.0285
2.17
.0855
7/0.72 BC
.0285
2.17
.0855
7/0.72 BC
.0285
1.21
.0477
7/0.4 TC
.0159
1.21
.0477
7/0.4 TC
.0159
7.24
.285
10.29
.405
1/BC
Use RG 213
Use RG 214
Use RG 214
Uase RG 214
Use RG 215
Use RG 215
7.11
.280
2/Inner SC
Outer BC
10.67
.420
7.11
.280
10.67
.420
9A
9B
10
10A
11
11A
12
2/SC
2/SC
1/BC
1/BC
1/BC
1/BC
1/BC
7.11
.280
10.67
.420
7.24
.285
PVC-II
w/Armor
11.76
.463
7.24
.285
PBC-IIA
w/Armor
11.76
.463
7.24
.285
10.29
.405
Use up to
100 MHz
PVC-I
7.24
.285
10.29
.405
Use up to
1000 Mhz
PVC-IIA
1.21
.0477
7/0.4 TC
.0159
7.24
.285
PVC-II
w/Armor
11.76
.463
Use RG 12A
284
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Appendix D - Typical Coaxial Cable Specifications (Continued)
Max.
RG/U
Type
Cable
Number/Type
DOD of Shielding
Braids
Nom.
Imped.
(Ohms)
Nom.
Cap
pf/ft
Max.
Operating
Temp. (C°)
Inner
Conductor
Dielectric
Material
Jacket
Material
Weight
(lb/ft)
Operating
Voltage
O.D.
Comments
(Volts RMS)
1.21
.0477
7.24
1/BC
.285
PVC-IIA
w/Armor
11.76
Use up to
1000 MHz
12A
13
PE
PE
PE
.141
.126
.126
75
74
52
20.6
20.8
20.8
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
5000
4000
4000
7/0.4 TC
.0159
.463
1.21
.0477
7/0.4 TC
.0159
1.21
.0477
7/0.4 TC
.0159
7.11
2/BC
.280
10.67
.420
PVC-I
Use RG 216
Use RG 216
7.11
2/BC
.280
10.67
.420
13A
PVC-IIA
2.59 BC
9.4
13.84
14
14A
15
PE
PE
PE
2/BC
.370
PVC-II
PVC-IIA
PVC-I
.216
.216
.197
52
76
52
29.5
29.5
20.0
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
5500
7000
5000
Use RG 217
Use RG 217
.1020
.545
2.59 BC
.1020
1.45 CCS
.0571
9.4
13.84
.545
13.84
.545
2/BC
.370
9.4
Use up to
1000 MHz
2/BC
.370
2.59 BC
.1250
Tube
11.68
1/BC
.460
16
.630
Use up to
1000 MHz
16
PE
PVC-I
.254
52
29.5
ꢀ40 ꢁ80
6000
4.78 BC
17.27
1/BC
.680
17.27
1/BC
.680
22.1
Use up to
1000 MHz
17
PE
PE
PVC-II
.460
.460
52
52
29.5
29.5
ꢀ40 ꢁ80
ꢀ40 ꢁ80
11,000
11,000
.1880
.870
4.78 BC
.1880
22.1
.870
17A
PVC-IIA
Use RG 218
17B Cancelled, Reassigned New Nomenclature, RG 177
4.78 BC
17.27
PVC-II
23.50
18
18A
19
PE
PE
PE
PE
PE
PE
1/BC
1/BC
1/BC
1/BC
1/BC
1/BC
.585
.585
.740
.740
.925
.925
52
52
52
52
52
53
29.5
29.5
29.5
29.5
29.5
29.5
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
11,000
11,000
14,000
14,000
14,000
14,000
Use RG 219
Use RG 219
Use RG 220
Use RG 220
Use RG 221
Use RG 221
.1880
.680
w/Armor
.925
4.78 BC
.1880
6.35 BC
.2500
6.35 BC
.2500
6.35 BC
.2500
17.27
.680
23.11
.910
23.11
.910
23.11
.910
PVC-IIA
w/Armor
23.57
.928
28.45
1.120
28.45
1.120
29.92
1.178
PVC-II
19A
20
PVC-IIA
PVC-II
w/Armor
PVC-IIA
w/Armor
6.35 BC
.2500
23.11
.910
29.92
1.178
20A
1.29
0508
4.7
8.43
21
PE
PE
2/SC
2/SC
PVC-II
.087
.087
53
95
29.0
29.0
ꢀ40 ꢁ80
ꢀ40 ꢁ80
2700
2700
Use RG 222
Use RG 222
.185
.332
High Res. Wire
1.29
.0508
High Res. Wire
4.7
.185
8.43
.332
21A
PVC-IIA
2 Cond. 1.16
.0456
7.24
10.29
Balanced Line
22
22A
22B
23
PE
1/TC
2/TC
2/TC
PVC-I
PVC-II
PVC-IIA
PVC-I
.105
.151
.151
95
95
16.0
16.0
16.0
12.0
12.0
12.0
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
1000
1000
1000
3000
3000
3000
7/0.39 BC
.0152
.285
.405
w/Twisted Cond.
2 Cond. 1.16
.0456
7/0.39 BC
.0152
2 Cond. 1.16
.0456
7/.0.39 BC
.0152
2 Cond. 2.17
.0855
7/0.72 BC
.0285
2 Cond. 2.17
.0855
7/0.72 BC
.0285
7.24
.285
10.67
.420
Balanced Line
w/Twisted Cond.
PE
7.24
.285
10.67
.420
Balanced Line
w/Twisted Cond.
PE
125
125
125
.670
2/Inidividual
Inner
Common
Outer BC
2/Individual
Inner
Common
Outer BC
2/Individual
Inner
Common
Outer BC
16.51 x .490
9.65
.380
.650
24
.945
PE,2 Cores
PE,2 Cores
PE,2 Cores
.490
.490
.670
Use RG 23A
16.51 x .490
9.65
.380
.650
24
Dual Coaxial
Balanced Line
23A
24
PVC-IIA
.945
2 Cond. 2.17
.0855
7/0.72 BC
.0285
25.48
1.003
19.81
.780
9.65
.380
PVC-I
w/Armor
2/Individual
ꢀ40 ꢁ80
Use RG 24A
285
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Appendix D - Typical Coaxial Cable Specifications (Continued)
Max.
RG/U
Type
Cable
Number/Type
DOD of Shielding
Braids
Nom.
Imped.
(Ohms)
Nom.
Cap
pf/ft
Max.
Operating
Temp. (C°)
Inner
Conductor
Dielectric
Material
Jacket
Material
Weight
(lb/ft)
Operating
Voltage
O.D.
Comments
(Volts RMS)
2 Cond. 2.17
.0855
2/Individual
25.48
1.003
19.81
.780
9.65
Inner
PVC-IIA
w/Armor
24A
25A
26A
27A
28B
PE,2 Cores
Rubber-E
Rubber-E
Rubber-D
Rubber-D
.670
.205
.189
.304
.370
125
48
48
48
48
12.0
50.0
50.0
50.0
50.0
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
3000
Use RG 23A
7/0.72 BC
.0285
.380
Common
Outer BC
1.49
.0585
19/0.3 TC
.0117
7.32
.288
12.83
.505
2/TC
1/TC
Rubber-IV
10,000
10,000
15,000
15,000
—
—
—
—
1.49
.0585
19/0.3 TC
.0117
7.32
.288
Rubber-IV
w/Armor
12.27
.483
2.35
.0925
19/0.47 TC
.0185
11.56
.455
Rubber-IV
w/Armor
16.59
.653
1/TC
2.35
.0925
19/0.47 TC
.0185
11.56
.455
Rubber-IV
w/Armor
19.05
.750
2/TC, GS
0.81 BC
.0320
2.95
4.67
29
30
31
PE
PIB
PIB
1/TC
1/BC
1/BC
PE-111
PVC-I
PVC-I
0.21
.044
.106
53.5
50
28.5
27.0
31.0
ꢀ55 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
1900
1500
2000
Use RG 58
Use RG 58
Use RG 213
1.21
.116
.184
.0477
7/0.4 BC
.0159
4.7
.185
6.35
.250
2.17
.0855
7/0.72 BC
.0285
7.24
.285
10.29
.405
51
2.17
.0855
7.24
PVC-I
11.81
32
33
34
PIB
PE
PE
1/BC
None
1/BC
.141
.390
.224
51
51
71
29.0
30.0
21.5
ꢀ40 ꢁ80
ꢀ55 ꢁ80
ꢀ40 ꢁ80
2000
6000
5200
Use RG 215
—
7/0.72 BC
.0285
.285
w/Armor
.465
2.59 BC
.1019
9.4
3.70
11.94
.470
Lead
2.17
.0855
7/0.72 BC
.0285
11.56
.455
15.88
.625
PVC-I
Use RG 31B
1.9
.0747
11.68
16
34A
34B
35
PE
PE
PE
1/BC
1/BC
1/BC
PVC-IIA
PVC-IIA
.224
.224
.525
75
75
71
20.6
20.6
21.5
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
6500
6500
Use RG 34B
7/0.63 BC
.0249
.460
.630
1.9
.0747
7/0.63 BC
.0249
11.68
.460
16
.630
Use up to
1000 MHz
2.91 BC
.1144
1.6
11.68
.460
PVC-II
w/Armor
23.57
.928
10,000
Use RG 35B
Use RG 35B
0.63
2.65 BC
.1045
11.68
.460
PVC-IIA
w/Armor
23.57
.928
35A
35B
36
PE
PE
1/BC
1/BC
1/BC
1/TC
2/TC
.525
.525
.805
.040
.110
75
75
20.6
20.6
22.0
38.0
38.0
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ55 ꢁ80
ꢀ55 ꢁ80
10,000
10,000
13,000
750
2.65 BC
.1045
11.68
.460
23.57
.928
Unarmored:
see RG 164
PVC-IIA
PVC-I
PE-III
4.11 BC
.1620
23.11
.910
29.97
1.180
Use up to
1000 MHz
PE
69
0.81 TC
.0320
3.56
.140
5.33
.210
37
Rubber-C
Rubber-C
52.5
52.5
—
—
1.15 TC
.0453
4.98
.196
7.92
.312
38
PE-III
1000
0.64 CCS
4.98
7.92
39
40
.0253
Rubber-C
Rubber-C
.196
2/TC
2/TC
PE-III
.312
.100
.150
72.5
72.5
28.6
28.0
ꢀ55 ꢁ80
ꢀ40 ꢁ80
1000
1000
—
—
0.64 CCS
.0253
4.98
.196
10.67
.420
Rubber IV
1.24
.0490
6.35
10.8
41
42
Rubber-IV
PE
1/TC
2/SC
Rubber-IV
PVC-II
.150
.050
67.5
78
27.6
20.0
ꢀ40 ꢁ80
ꢀ40 ꢁ80
3000
2700
—
16/0.25 TC
.0100
.250
.425
0.72
.0285
Res. Wire
4.98
.196
8.69
.342
Use RG 222
286
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Appendix D - Typical Coaxial Cable Specifications (Continued)
Max.
RG/U
Type
Cable
Number/Type
DOD of Shielding
Braids
Nom.
Imped.
(Ohms)
Nom.
Cap
pf/ft
Max.
Operating
Temp. (C°)
Inner
Conductor
Dielectric
Material
Jacket
Material
Weight
(lb/ft)
Operating
Voltage
O.D.
Comments
Use RG 57
Use RG 54A
(Volts RMS)
2 Cond. 2.17
.0855
11.99
1/BC
.427
15.67
43
54
Rubber-B
PE
PVC-I
PVC-I
PE-III
—
95
58
58
17.6
27.0
26.5
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ55 ꢁ80
1500
2500
3000
7/0.72 BC
.0285
.617
1.21
.0477
7/0.4 BC
.0159
4.7
6.99
.275
1/BC
.185
.045
.041
1.16
.0456
7/0.39 BC
.0152
4.52
1/TC
.178
6.22
2.45
Use up to
1000 MHz
54A
PE
0.81 BC
2.95
2/TC
.116
5.08
55
PE
PE
PE
PE-III
PVC-IIA
PE-IIIA
.032
.034
.033
53.5
50
28.5
30.8
28.5
ꢀ55 ꢁ80
ꢀ40 ꢁ80
ꢀ55 ꢁ80
1900
1900
1900
.0320
.200
Use RG 55B
Use RG 223
.0.89 SC
.0350
2.95
2/SC
.116
5.08
.200
55A
55B
0.81 SC
.0320
2.95
2/TC
.116
5.08
.200
Use up to
1000 MHz
53.5
1.49
.0585
7.82
2/BC
.308
13.59
56
57
Rubber-D
PE
PVC-I
PVC-I
.243
.225
.225
48
95
95
50.0
17.0
17.0
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
8000
3000
3000
—
19/0.3 BC
.0117
.535
2 Cond. 2.17
.0855
7/0.72 BC
.0285
11.99
1/TC
.472
15.88
.625
Balanced Line
Parallel
2 Cond. 2.17
.0855
7/0.72 BC
.0285
11.99
1/TC
.472
15.88
.625
Balanced Line
Parallel
57A
PE
PVC-IIA
0.81 BC
2.95
1/TC
.116
4.95
58
PE
PE
PE
PVC-I
PVC-I
.029
.029
.029
53.5
52
28.5
28.5
28.5
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
1900
1900
1900
.0320
.195
Use RG 58B
Use RG 58C
0.9
.0355
2.95
1/TC
.116
4.95
.195
58A
58B
0.81 BC
.0320
2.95
1/TC
.116
4.95
.195
Use up to
1000 MHz
PVC-IIA
53.5
0.9
.0355
19/0.8 TC
.0071
2.95
1/TC
.116
4.95
.195
Extra Flexible
Version RG 58B
58C
PE
PVC-IIA
.029
50
30.8
ꢀ40 ꢁ80
1900
0.64 CCS
3.71
1/BC
.146
6.15
59
59A
59B
60
PE
PE
PVC-I
PVC-IIA
PVC-IIA
Rubber-IV
PVC-I
.032
.032
.032
.150
.038
.038
73
73
75
50
93
93
21.0
21.0
20.6
39.0
13.5
13.5
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
2300
2300
2300
1100
750
.0253
.242
Use RG 59B
Use RG 59B
0.64 CCS
.0253
3.71
1/BC
.146
6.15
.242
0.58 CCS
.0230
3.71
1/BC
.146
6.15
.242
Use up to
1000 MHz
PE
1.29 Str. C
.0508
6.35
1/BC
.250
10.8
.425
Rubber-C
—
0.64 CCS
.0253
Air-space
PE
3.71
1/BC
.146
6.15
.242
Use RG 62A
Low
62
0.64 CCS
.0253
Air-space
PE
3.71
1/BC
.146
6.15
.242
62A
PVC-IIA
750
Capacitance
0.61
.0240
7/0.2 CCS
.0080
Air-space
PE
3.71
1/BC
.146
6.15
.242
Extra Flexible
RG 62A
62B
PVC-IIA
.038
93
13.5
ꢀ40 ꢁ80
750
0.64 CCS
Air-space
PE
7.24
1/BC
.285
10.29
63
PVC-I
PVC-I
.083
.083
.083
125
125
125
10.0
10.0
10.0
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
1000
1000
1000
Use RG 63B
Use RG 63B
.0253
.405
0.64 BC
.0253
Air-space
PE
7.24
1/BC
.285
10.29
.405
63A
63B
0.64 CCS
.0253
Air-space
PE
7.24
1/BC
.285
10.29
.405
Low
Capacitance
PVC-IIA
1.49
.0585
7.82
12.57
.495
.308
2/TC
7.24
—
64
64A
65
Rubber-D
Rubber-E
PE
Rubber-IV
Rubber-IV
PVC-I
.225
.205
.096
48
48
60.0
50.0
44.0
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
10,000
10,000
1000
19/0.3 TC
.0117
10.29
.405
Capacitance
.285
1.49
.0585
19/0.3 TC
.0117
7.32
2/TC
.288
11.68
.460
—
0.2 ꢀ.0080ꢁ
Formex-F
3.25 ꢀ.1280ꢁ
Dia. Helix
7.24
1/BC
.285
10.29
.405
High Impedance
Video Delay Line
950
287
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Appendix D - Typical Coaxial Cable Specifications (Continued)
Max.
RG/U
Type
Cable
Number/Type
DOD of Shielding
Braids
Nom.
Imped.
(Ohms)
Nom.
Cap
pf/ft
Max.
Operating
Temp. (C°)
Inner
Conductor
Dielectric
Material
Jacket
Material
Weight
(lb/ft)
Operating
Voltage
O.D.
Comments
(Volts RMS)
.02 ꢀ.0080ꢁ
Formex-F
3.25 ꢀ.1280ꢁ
Dia. Helix
7.24
1/BC
.285
10.29
.405
High Impedance
Video Delay Line
65A
PE
PVC-IIA
.096
950
44.0
ꢀ40 ꢁ80
1000
0.64 CCS
Air-space
PE
3.71
2/TC
.146
6.22
71
71A
71B
72
PVC-I
PE-III
.046
.046
.046
.169
.031
.310
.310
93
93
13.5
13.5
13.5
7.8
ꢀ40 ꢁ80
ꢀ55 ꢁ80
ꢀ55 ꢁ80
ꢀ40 ꢁ80
ꢀ55 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
750
750
Use RG 71B
Use RG 71B
.0253
.245
0.64 CCS
.0253
Air-space
PE
3.71
2/TC
.146
6.22
.245
0.64 CCS
.0253
Air-space
PE
3.71
2/TC
.146
6.22
.245
Low
Capacitance
PE-IIIA
PVC-I
93
750
0.64 CCS
.0253
Air-space
PE
11.68
1/BC
.460
16
.630
Low
Capacitance
150
25
750
1.65 BC
.0650
2.95
2/BC
.116
Copper
Braid
4.45
.175
Low
Impedance
73
PE
PE
PE
61.8
29.5
29.5
1000
5500
5500
2.59 BC
.1020
9.4
PVC-II
w/Armor
15.32
.603
74
2/BC
.370
52
Use RG 224
Use RG 224
2.59 BC
.1020
9.4
PVC-IIA
w/Armor
15.32
.603
74A
2/BC
.370
52
1.49
.0585
7.32
2/TC
.288
11.43
8000
Peak
77A
78A
Rubber-E
Rubber-E
PVC-IIA
PVC-IIA
.195
.149
48
48
50.0
50.0
ꢀ40 ꢁ80
ꢀ40 ꢁ80
—
—
19/0.3 TC
.0117
.450
1.49
.0585
19/0.3 TC
.0117
7.32
1/TC
.288
10.67
.420
8000
Peak
0.64 CCS
Air-space
PE
7.24
1/BC
.285
PVC-I
11.76
Low
79
79A
79B
81
.136
.130
.136
.172
.698
.120
1.325
2.910
—
.125
.125
50
10.0
10.0
10.0
37.0
36.0
44.0
20.6
20.6
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
250
1000
1000
.0253
w/Armor
.463
Capacitance
0.64 CCS
.0253
Air-space
PE
7.24
1/BC
.285
PVC-I
w/Armor
11.76
.463
Low
Capacitance
0.64 CCS
.0253
Air-space
PE
7.24
1/BC
.285
PVC-IIA
w/Armor
11.76
.463
Low
Capacitance
1000
1.59 BC
.0625
Magnesium
Oxide G
8.15
None
.321
Copper
Tube
8.26
.325
3000
—
—
3.18 BC
.1250
Magnesium
Oxide G
16.51
None
.650
Copper
Tube
19.05
.750
82
50
250
5000
2.59 BC
.1020
6.1
10.29
.405
Low
Impedance
83
PE
PE
PE
1/BC
.240
PVC-I
35
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
2000
2.65 BC
.1045
17.27
1/BC
.680
PVC-IIA
w/Lead Sheath
25.4
1.000
RG 35B with
Special Armor
84A
85A
75
10,000
10,000
2.65 BC
.1045
17.27
1/BC
.680
PVC-IIA
w/Lead Armor
39.75
1.565
RG 84A with
Special Armor
75
2 Cond. 2.17
.0855
7.62
7.62
86
87A
88
PE
.300 x 16.51 None
.650
None
.300 x 16.51.100
200
50
7.8
ꢀ55 ꢁ80
ꢀ55 ꢁ250
ꢀ40 ꢁ80
ꢀ40 ꢁ80
10,000
5000
Twin Lead
7/0.72 BC
.0285
.650
2.44
.0960
7/0.81 SC
.0320
7.11
2/SC
.280
FG
Braid-V
10.8
.180
.425
PTFE
29.4
50.0
50.0
Use RG 225
1.49
.0585
19/0.3 TC
.0117
7.32
4/TC
.288
13.08
.211
Rubber-E
Ruber-E
Rubber-E
PVC-I
48
10,000
10,000
—
—
—
.515
1.49
.0585
19/0.3 TC
.0117
7.32
4/TC
.288
13.08
.211
88A
PVC-IIA
48
.515
1.49
.0585
19/0.3 TC
.0117
7.32
4/TC
.288
14.35
.238
88B
89
Rubber-IV
PVC-I
48
125
50
50.0
10.0
30.8
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
10,000
1000
.565
0.64 CCS
.0253
Air-space
PE
7.24
1/BC
.285
16.05
.195
Low
Capacitance
.632
1.53
.0603
7/0.51 SC
.0201
4.95
10.8
—
Excellent
Shielding
90
PE
3/SC, GS, SC
.195
PVC-IIA
3000
.425
5.08
.2000
19/1.02 BC
.0400
Taped
PTFE
14.55
1/BC
.573
FG
Braid-V
18.03
.475
93
50
29.4
ꢀ55 ꢁ250
10,000
Use RG 211A
.710
288
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Appendix D - Typical Coaxial Cable Specifications (Continued)
Max.
RG/U
Type
Cable
Number/Type
DOD of Shielding
Braids
Nom.
Imped.
(Ohms)
Nom.
Cap
pf/ft
Max.
Operating
Temp. (C°)
Inner
Conductor
Dielectric
Material
Jacket
Material
Weight
(lb/ft)
Operating
Voltage
O.D.
Comments
Use RG 226
Use RG 226
(Volts RMS)
2.86
.1125
Taped
PTFE
7.42
2/BC
.292
FG
11.3
94
.270
.445
.046
50
50
35
29.4
29.4
44.0
ꢀ55 ꢁ250
ꢀ55 ꢁ250
ꢀ40 ꢁ80
7000
7000
2000
19/0.57 SC
.0225
Braid-V
.445
3.23
.1270
19/0.65 SC
.0254
Taped
PTFE
9.4
FG
Braid-V
12.7
.500
94A
100
2/BC
.370
1.87
.0735
19/0.37 BC
.0147
3.71
1/BC
.146
6.15
.242
Use up to
1000 MHz
PE
PVC-I
1.63 BC
14.94
101
102
Rubber
Rubber
—
—
1/TC
1/TC
—
—
—
—
75
—
—
—
—
—
—
—
—
.0641
.588
2 Cond.
2.05 BC
.0808
27.64
1.088
140
2 Cond. 0.96
.0378
2.01
.079
Each
5.97
108
108A
111
PE
PE
PE
PE
1/TC
1/TC
2/TC
2/TC
PVC-II
.032
.032
.146
.146
78
78
95
95
19.6
19.6
16.0
16.0
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
1000
1000
1000
1000
Use RG 108A
Balanced Line
Use RG 111A
7/0.32 TC
.0126
.235
2 Cond. 0.96
.0378
7/0.32 TC
.0126
2.01
.079
Each
5.97
.235
PVC-IIA
2 Cond. 1.16
.0456
7/0.39 BC
.0152
7.24
.285
PVC-II
w/Armor
12.14
.478
2 Cond. 1.16
.0456
7/0.39 BC
.0152
7.24
.285
PVC-IIA
w/Armor
12.14
.478
Use RG 22B
w/Armor
111A
0.18 CCS
Air-space
PE
7.24
10.29
114
1/BC
1/BC
PVC-I
.087
.087
185
185
6.5
6.5
ꢀ40 ꢁ80
ꢀ40 ꢁ80
1000
1000
Use RG 114A
.0070
.285
.405
0.18 CCS
.0070
Air-space
PE
7.24
.285
10.29
.405
Low
Capacitance
114A
PVC-IIA
2.13
.0840
Taped
PTFE
6.35
FG
9.53
115
115A
116
2/BC
2/BC
2/SC
.148
.180
.198
50
50
50
29.4
29.4
29.4
ꢀ55 ꢁ250
ꢀ55 ꢁ250
ꢀ55 ꢁ250
5000
5000
5000
7/0.71 SC
.0280
.250
Braid-V
.375
Use RG 115A
2.13
.0840
7/0.71 SC
.0280
Taped
PTFE
6.48
.255
FG
Braid-V
10.54
.415
Extra Flexible
RG 225
2.44
.0960
7/0.81 SC
.0320
7.11
.280
FG Braid-V
w/Armor
12.7
.475
PTFE
Use RG 227
4.78 BC
15.75
FG
18.54
117
117A
118
PTFE
PTFE
PTFE
PTFE
PTFE
PTFE
1/BC
1/BC
1/BC
1/BC
2/BC
2/BC
.641
.641
.682
.682
.225
.282
50
50
50
50
50
50
29.4
29.4
29.4
29.4
29.4
29.4
ꢀ55 ꢁ250
ꢀ55 ꢁ250
ꢀ55 ꢁ250
ꢀ55 ꢁ250
ꢀ55 ꢁ250
ꢀ55 ꢁ250
7000
7000
7000
7000
6000
6000
Use RG 211A
Use RG 211A
Use RG 228A
Use RG 228A
.1880
.620
Braid-V
.730
4.78 BC
.1880
15.75
.620
FG
Braid-V
18.54
.730
4.78 BC
.1880
15.75
.620
FG Braid-V
w/Armor
19.81
.780
4.78 BC
.1880
15.75
.620
FG Braid-V
w/Armor
19.81
.780
118A
119
2.59 BC
.1020
8.43
.332
FG
Braid-V
11.81
.465
Use up to
1000 MHz
2.59 BC
.1020
8.43
.332
FG
Braid-V
13.28
.523
RG 119
w/Armor
120
0.76
.0300
7/0.13 TC
.0050
2.44
.096
4.06
.160
Use up to
1000 MHz
122
PE
1/TC
PVC-IIA
.016
50
29.4
ꢀ40 ꢁ80
1900
0.64 TCCS
Taped
PTFE
3.43
FG
6.1
124
125
1/TC
1/BC
.210
.180
73
20.3
7.8
ꢀ55 ꢁ250
ꢀ40 ꢁ80
2300
2000
Use RG 140
.0253
.135
Braid-V
.240
0.4 CCS
.0159
Air-space
PE
11.68
.460
15.24
.600
Low
Capacitance
PVC-IIA
150
1.55
.0609
7/0.52 HR
.0203
4.7
.185
FG
Braid-V
7.11
.280
High
Loss Cable
126
PTFE
1/HR
.070
50
29.4
ꢀ55 ꢁ250
3000
289
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Appendix D - Typical Coaxial Cable Specifications (Continued)
Max.
RG/U
Type
Cable
Number/Type
DOD of Shielding
Braids
Nom.
Imped.
(Ohms)
Nom.
Cap
pf/ft
Max.
Operating
Temp. (C°)
Inner
Conductor
Dielectric
Material
Jacket
Material
Weight
(lb/ft)
Operating
Voltage
O.D.
Comments
(Volts RMS)
2 Cond. 2.17
.0855
11.99
1/TC
.472
15.88
RG 57 w/
130
131
PE
PE
PVC-I
.220
.290
95
95
17.0
17.0
ꢀ40 ꢁ80
ꢀ40 ꢁ80
3000
3000
7/0.72 BC
.0285
.625
Twisted Cond.
2 Cond. 2.17
.0855
7/0.72 BC
.0285
11.99
1/TC
.472
PVC-I
w/Armor
17.35
.683
Armored
RG 130
0.72 BC
7.24
1/BC
.285
10.29
133
133A
140
PE
PVC-I
PVC-IIA
.094
.094
.056
.036
.036
.047
.047
.047
.114
.109
95
95
75
50
50
50
50
50
50
50
16.2
16.2
19.5
29.4
29.4
29.4
29.4
29.4
29.4
29.4
ꢀ40 ꢁ80
ꢀ40 ꢁ80
4000
4000
2300
1900
1900
1900
1900
1900
3000
3000
Use RG 133A
.0285
.405
0.64 BC
.0253
7.24
1/BC
.285
10.29
.405
95 Ohm Version
RG 8
PE
0.64 SCCS
.0250
3.71
1/SC
1.46
5.92
.233
See RG 302 for
FEP Jacket
PTFE
PTFE
PTFE
PTFE
PTFE
PTFE
PTFE
PTFE
FG Braid-V
ꢀ55 ꢁ250
ꢀ55 ꢁ250
ꢀ55 ꢁ250
ꢀ55 ꢁ250
ꢀ50 ꢁ250
ꢀ55 ꢁ250
ꢀ55 ꢁ250
ꢀ55 ꢁ250
0.91 SCCS
.0359
2.95
1/SC
.116
4.83
.190
141
Use RG 141A
FG Braid-V
FG Braid-V
0.99 SCCS
.0390
2.95
1/SC
.116
4.83
.190
See RG 303 for
FEP Jacket
141A
142
0.91 SCCS
.0359
2.95
2/SC
.116
4.95
.195
FG Braid-V
FG
Use RG 142A
0.99 SCCS
.0390
2.95
2/SC
.116
4.95
.195
See RG 142B for
FEP Jacket
142A
142B
143
0.99 SCCS
.0390
2.95
2/SC
.116
4.95
.195
Standard Center
Cond. Available
FEP
1.45 SCCS
.0570
4.7
8.26
.325
2/SC
.185
FG Braid-V
FG Braid-V
Use RG 143A
1.5 SCCS
.0590
4.7
8.26
.325
See RG 304 for
FEP Jacket
143A
1/SC
.185
1.36
.0537
7/0.45 SCCS
.0179
Air-space
PE
7.24
10.41
.410
High Temp.
RG 11A
144
Copper Tube
.285
FG Braid-V
.137
75
19.5
ꢀ55 ꢁ250
5000
2 Cond. 1.83 BC Air-space
145
146
147
—
1/BC
1/BC
1/BC
Lead/Tar
—
—
.108
—
75
190
52
14.6
6.0
—
—
—
.0720
PTFE
0.18 CCS
.0070
7.24
.285
9.53
.375
Low
Capacitance
PE
FG Braid-V
ꢀ55 ꢁ200
ꢀ40 ꢁ80
1000
6.35 BC
.2500
23.11
.910
PVC-I
w/Armor
49.2
1.937
RG 19U
w/Armor
PE
29.5
14,000
2.17
.0855
7.24
PVC-I
20.32
148
149
150
156
157
PTFE
1/SC
1/BC
—
52
75
75
50
50
29.5
20.6
20.6
32.0
38.0
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
4000
5000
—
7/0.72 BC
.0285
.285
w/Armor
.800
1.22
.048
7/0.4 TC
.0159
7.24
.285
10.29
.405
PE
PE
PVC-IIA
.105
.112
.211
.317
Use RG 391
Use RG 392
1.22
.048
7/0.4 TC
.0159
7.24
.285
PVC-IIA
w/Armor
11.76
.463
1/BC
5000
2.17
.0855
7/0.72 TC
.0285
PE and
Cond. PE
7.24
.285
13.72
.540
Triaxial Pulse
Cable
3/TC, GS, TC
3/TC, GS, TC
PVC-IIA
PVC-IIA
10,000
15,000
2.55
.1005
19/0.51 TC
.0201
PE and
Cond. PE
11.56
.455
18.42
.725
Triaxial Pulse
Cable
5.05
.1988
PE and
11.56
18.42
Triaxial Pulse
Cable
158
159
160
3/TC, GS, TC
1/SC
PVC-IIA
FG Braid-V
PVC-I
.380
.035
—
25
50
78.0
29.4
12.0
ꢀ40 ꢁ80
ꢀ55 ꢁ250
ꢀ40 ꢁ80
15,000
1900
37/0.72 TC
.0284
Cond. PE
.455
.725
0.81 SC
.0320
Taped
PTFE
2.95
.116
4.95
.195
Use RG 141
4 Cond. 1.8
.071
19/0.36 2TC, 2BC
.0142
8.18
.322
26.8
1.055
4 Cond.
Balanced Line
PE
1/BC
125
3000
0.3
.012
1.45
2.08
161
164
PTFE
PE
1/SC
1/BC
Nylon
.015
.490
70
75
20.0
20.6
ꢀ60 ꢁ120
ꢀ40 ꢁ80
1000
Miniature
7/0.1 S Cad. BR
.004
.057
.082
2.65 BC
.1045
17.27
.680
22.1
.870
RG 35B without
Armor
PVC-IIA
10,000
290
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Appendix D - Typical Coaxial Cable Specifications (Continued)
Max.
RG/U
Type
Cable
Number/Type
DOD of Shielding
Braids
Nom.
Imped.
(Ohms)
Nom.
Cap
pf/ft
Max.
Operating
Temp. (C°)
Inner
Conductor
Dielectric
Material
Jacket
Material
Weight
(lb/ft)
Operating
Voltage
O.D.
Comments
(Volts RMS)
2.44
.0960
7.24
1/SC
.285
FG
10.41
RG 225 w/One
Braid
165
166
PTFE
PTFE
PE
.121
.144
.008
.008
50
50
50
50
29.4
29.4
30.8
30.8
ꢀ55 ꢁ250
ꢀ55 ꢁ250
ꢀ40 ꢁ80
ꢀ40 ꢁ80
5000
5000
1500
1500
7/0.81 SC
.0320
Braid-V
.410
2.44
.0960
7/0.81 SC
.0320
7.24
1/SC
.285
FG Braid-V
w/Armor
11.68
.460
RG 165
w/ Armor
0.48
.0189
7/0.16 CCS
.0063
1.52
1/TC
.060
2.54
.100
Miniature Data
Transmission
174
PVC
0.48
.0189
7/0.16 CCS
.0063
1.52
1/TC
.060
2.54
.100
Miniature Data
Transmission
174A
PE
PVC-IIA
3.43
7.24
10.29
176
177
.135 Helix over
Magnetic Core
PE
PE
1/Magnet Wire
.285
PVC-I
.120
.470
2240
50
49.0
30.8
ꢀ40 ꢁ80
ꢀ40 ꢁ80
5000
—
.405
4.95 BC
.195
17.27
2/SC
.680
22.73
.895
High Frequency
RG 218
PVC-IIA
11,000
0.3
.0120
0.91
1/SC
.036
1.83
178
178A
178B
179
PTFE
PTFE
PTFE
PTFE
PTFE
PTFE
PTFE
PTFE
PTFE
PE
KEL-F
KEL-F
FEP-IX
KEL-F
KEL-F
FEP-IX
KEL-F
KEL-F
KEP-IX
.0054
.005
.0054
.010
.010
.010
.019
.019
.019
.198
—
50
50
50
70
75
75
93
95
95
125
29.4
29.4
29.4
20.4
19.5
19.5
15.4
15.4
15.4
12.0
ꢀ40 ꢁ150
ꢀ40 ꢁ150
ꢀ55 ꢁ200
ꢀ55 ꢁ150
ꢀ40 ꢁ150
ꢀ55 ꢁ200
ꢀ40 ꢁ150
ꢀ40 ꢁ150
ꢀ55 ꢁ200
ꢀ40 ꢁ80
ꢀ40 ꢁ80
1000
1000
1000
1200
1200
1200
1500
1500
1500
3500
Use RG 178B
Use RG 178B
7/0.1 SCCS
.0040
.072
0.3
.0120
7/0.1 SCCS
.0040
0.86
1/SC
.034
1.83
.072
0.3
.0120
7/0.1 SCCS
.0040
0.86
1/SC
.034
1.83
.072
High Strength
Cond. Available
0.3
.0120
7/0.1 SCCS
.0040
1.45
1/SC
.057
2.54
.100
Use RG 179B
Use RG 179B
0.3
.0120
7/0.1 SCCS
.0040
1.6
2.54
.100
179A
179B
180
1/SC
.063
0.3
.0120
7/0.1 SCCS
.0040
1.6
2.54
.100
High Strength
Cond. Available
1/SC
.063
0.3
.0120
7/0.1 SCCS
.0040
2.62
1/SC
.103
3.56
.140
Use RG 180B
Use RG 180B
0.3
.0120
7/0.1 SCCS
.0040
2.59
1/SC
.102
3.56
.140
180A
180B
181
0.3
.0120
7/0.1 SCCS
.0040
2.59
1/SC
.102
3.56
.140
High Strength
Cond. Available
2 Cond. 1.21
.0477
7/0.4 BC
.0159
2/Individual
5.33
.210
Inner
16.25
.640
Balanced
Line
PVS-IIA
Common
Outer BC
2 of 19/0.36 BC
.0142
2 of 19/0.17 TC
.0066
2/8.43
Each Core
1/BC
4 Cores
PE
.332
PVC-IIA each
26.8
1.055
125
each
12.0
each
2300
3000
Special 4
Coaxial
182
2/3.71 Overall Shield PVC-I overall
.146
1/BC
6.38 BC
16.05
19.05
See Times
AM-5034S
183
185
PS Helix
AI. Tube
None
.380
—
50
23.0
—
ꢀ40 ꢁ80
ꢀ40 ꢁ80
1800
—
.2510
.632
.750
0.08 ꢀ.0031ꢁ
Mag. Wire Helix
on PE Core
Air-Space
PE
4.78
.188
7.16
.282
Delay Line
Cable
1/Magnet Wire
PVC-IIA
2000
291
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Appendix D - Typical Coaxial Cable Specifications (Continued)
Max.
RG/U
Type
Cable
Number/Type
DOD of Shielding
Braids
Nom.
Imped.
(Ohms)
Nom.
Cap
pf/ft
Max.
Operating
Temp. (C°)
Inner
Conductor
Dielectric
Material
Jacket
Material
Weight
(lb/ft)
Operating
Voltage
O.D.
Comments
Use RG 179B
Use RG 179B
Use RG 316
(Volts RMS)
0.3
.0120
1.52
1/SC
.060
2.67
187
187A
188
PTFE
PTFE
PTFE
PTFE
PTFE
PTFE
.010
.010
.011
75
75
50
19.5
19.5
29.4
ꢀ55 ꢁ250
ꢀ55 ꢁ250
ꢀ55 ꢁ250
1200
1200
1200
7/0.1 SCCS
.0040
.105
0.3
.0120
7/0.1 SCCS
.0040
1.52
1/SC
.060
2.67
.105
0.51
.0201
7/0.17 SCCS
.0067
1.52
1/SC
.060
2.67
.105
0.51
.0201
1.52
1/SC
.060
2.67
188A
189
PTFE
PTFE
PE-IIIA
.011
.570
.353
50
50
50
29.4
23.0
50.0
ꢀ55 ꢁ250
ꢀ55 ꢁ80
ꢀ55 ꢁ80
1200
3500
Use RG 316
Use RG 389
—
7/0.17 SCCS
.0067
.105
6.38 BC
.2510
16.05
2/SC
.632
22.23
.875
PS Helix
1.49
.0585
7/0.3 TC
.0117
9.65
.380
3/TC,
GS, TC
17.78
.700
190
Rubber H, J
Neoprene VIII
15,000
12.32 TC Braid
27.05
3/TC,
37.08
191
192
193
194
Rubber H, J, H
Butyl Rubber
Neoprene VIII
Rubber
1.469
—
25
85.0
175.0
159.0
159.0
ꢀ55 ꢁ80
ꢀ55 ꢁ80
ꢀ55 ꢁ80
ꢀ55 ꢁ80
15,000
—
—
—
—
.485
1.065
GS, GS
1.460
26.8 GS Tube
1.055 TC Braid
3/TC,
GS, GS
55.88
2.200
15,000
Peak
—
—
—
12.5
12.5
12.5
26.8 GS Tube
1.055 TC Braid
Silicone
Rubber
3/TC,
GS, GS
53.34
2.100
30,000
Peak
Rubber
—
26.8 GS Tube
1.055 TC Braid
Silicone
Rubber
3/TC,
GS, GS
Rubber w/
Al. Armor
49.4
1.945
30,000
Peak
—
0.3
.0120
2.59
3.68
195
195A
196
PTFE
PTFE
PTFE
PTFE
1/SC
1/SC
1/SC
1/SC
PTFE
PTFE
PTFE
PTFE
.020
.020
.006
.006
95
95
50
50
15.4
15.4
29.4
29.4
ꢀ55 ꢁ250
ꢀ55 ꢁ250
ꢀ55 ꢁ250
ꢀ55 ꢁ250
1500
1500
1000
1000
Use RG 180B
Use RG 180B
Use RG 178B
Use RG 178B
7/0.1 SCCS
.004
.102
.145
0.3
.0120
7/0.1 SCCS
.004
2.59
.102
3.68
.145
0.3
.0120
7/0.1 SCCS
.004
0.86
.034
1.83
.072
0.3
.0120
7/0.1 SCCS
.004
0.86
.034
1.83
.072
196A
7.62 BC
19.25 22.23 ꢀ.875ꢁ
.758 OD Al. Tube
22.23
2400
Peak
197
198
199
PS Helix
PS Helix
PS Helix
None
PE
.500
.155
.435
50
70
70
22.0
16.0
16.0
ꢀ55 ꢁ80
ꢀ55 ꢁ80
ꢀ55 ꢁ80
—
—
—
.300
.875
2.9 BC
.1140
10.69 12.7 ꢀ.500ꢁ
.421 OD Al. Tube
15.24
.600
1300
Peak
5.31 BC
.209
19.25 22.23 ꢀ.875ꢁ
.758 OD Al. Tube
25.78
1.015
2400
Peak
PE
OD-10.29
.405
37.39 41.28 ꢀ1.625ꢁ
44.83
4600
Peak
200
209
PS Helix
PE
.900
.432
70
50
16.0
25.0
ꢀ55 ꢁ80
—
ID-7.65 BC Tube
.301
1.472 OD Al. Tube
1.765
4.8
.189
19/0.96 SC
.0378
Air-Space
PTFE
12.7
2/SC
.500
SR and
Polyester-IV
18.42
.725
Low Loss
RG 211A
ꢀ55 ꢁ150
3200
0.64 SCCS
Air-Space
PTFE
3.71
1/SC
.146
6.15
High Temp.
210
211
FG Braid-V
FG Braid-V
FG Braid-V
PVC-IIA
.040
.641
.641
.083
93
50
50
50
13.5
29.4
29.4
29.4
ꢀ55 ꢁ250
ꢀ55 ꢁ250
ꢀ55 ꢁ250
ꢀ40 ꢁ80
750
.0253
.242
Low Capacitance
4.83 BC
.1900
15.75
1/BC
.620
18.54
.730
High Temp.
High Power
PTFE
PTFE
PE
7000
7000
3000
4.83 BC
.1900
15.75
1/BC
.620
18.54
.730
High Temp.
High Power
211A
212
1.44 SC
.0556
4.7
8.43
.332
Use up to
10,000 MHz
2/SC
.185
2.26
.0888
7/0.75 BC
.0296
7.24
1/BC
.285
10.29
.405
Use up to
1000 MHz
213
PE
PVC-IIA
.099
50
30.8
ꢀ40 ꢁ80
5000
292
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Appendix D - Typical Coaxial Cable Specifications (Continued)
Max.
RG/U
Type
Cable
Number/Type
DOD of Shielding
Braids
Nom.
Imped.
(Ohms)
Nom.
Cap
pf/ft
Max.
Operating
Temp. (C°)
Inner
Conductor
Dielectric
Material
Jacket
Material
Weight
(lb/ft)
Operating
Voltage
O.D.
Comments
(Volts RMS)
2.26
.0888
7.24
2/SC
.285
10.0
Use up to
214
215
216
PE
PE
PE
PVC-IIA
.126
.121
.114
50
50
75
30.8
30.8
20.6
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
5000
5000
5000
7/0.75 SC
.0296
.425
10,000 MHz
2.26
.0888
7/0.75
.0296
7.24
1/BC
.285
PVC-IIA
w/Armor
11.76
.463
Armored
RG 213
1.21
.0477
7/0.75 BC
.0159
7.24
2/BC
.285
10.8
.425
Use up to
1000 MHz
PVC-IIA
2.7 BC
9.4
13.84
Use up to
1000 MHz
217
218
219
220
221
PE
PE
PE
PE
PE
2/BC
.370
PVC-IIA
PVC-IIA
.201
.460
.585
.740
.925
50
50
50
50
50
30.8
30.8
30.8
30.8
30.8
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
ꢀ40 ꢁ80
7000
.106
.545
4.95 BC
.195
17.27
1/BC
.680
22.1
.870
Use up to
1000 MHz
11,000
11,000
14,000
14,000
4.95 BC
.195
17.27
1/BC
.680
PVC-IIA
w/Armor
23.57
.928
Armored
RG 218
6.6 BC
.260
23.11
1/BC
.910
28.45
1.120
Use up to
1000 MHz
PVC-IIA
6.6 BC
.260
23.11
1/BC
.910
PVC-IIA
w/Armor
29.92
1.178
Armored
RG 220
1.41
.0556
High Res. Wire
4.7
8.43
.332
High
Attenuation
222
PE
2/SC
.185
PVC-IIA
.087
50
30.8
ꢀ40 ꢁ80
3000
0.89 SC
2.95
2/SC
.116
5.36
Use up to
223
224
PE
PE
PVC-IIA
.034
.310
50
50
30.8
30.8
ꢀ40 ꢁ80
ꢀ40 ꢁ80
1900
7000
.035
.211
10,000 MHz
2.609 BC
.106
9.4
PVC-IIA
w/Armor
15.32
.603
Armored
RG 217
2/BC
.370
2.38
.0936
7.24
2/SC
.285
10.92
See RG 393 for
FEP Jacket
225
226
227
PTFE
FG Braid-V
FG Braid-V
.180
.445
.198
50
50
50
29.4
29.4
29.4
ꢀ55 ꢁ250
ꢀ55 ꢁ250
ꢀ55 ꢁ250
5000
7000
5000
7/0.79 SC
.0312
.430
3.23
.1270
19/0.65 SC
.0254
Taped
PTFE
9.4
12.7
.500
2/SC
.370
—
2.38
.0936
7/0.79 SC
.0312
7.24
2/SC
.285
FG Braid-V
w/Armor
12.40
.488
Armored
RG 225
PTFE
4.83 BC
15.75
1/BC
.620
FG Braid-V
w/Armor
20.02
Armored
RG 211
228
PTFE
PTFE
.682
.682
50
50
29.4
29.4
ꢀ55 ꢁ250
ꢀ55 ꢁ250
7000
7000
.1900
.788
4.83 BC
.1900
15.75
1/BC
.620
FG Braid-V
w/Armor
20.02
.788
Armored
RG 211A
228A
2.44
.0960
7.24
1/SC
.285
FG Braid-V
w/Armor
11.68
229
230
PTFE
.144
—
50
25
29.4
ꢀ55 ꢁ250
ꢀ40 ꢁ80
5000
Use RG 166
—
7/0.81 SC
.032
.460
5.05
.1988
37/0.72 TC
.0284
11.56
3/TC,
GS, GS
18.8
.740
Rubber-D
Rubber-IV
100.0
15,000
.455
OD-4.11
.162
12.7
.500
11.43
12.7
5000
Peak
RG 331 for
231
232
233
Foam PE
PE Helix
PS Helix
None
PE-IIIA
PE-IIIA
.118
.570
50
50
50
25.0
22.0
22.0
ꢀ55 ꢁ80
ꢀ50 ꢁ80
ꢀ55 ꢁ80
ID-2.84 BC
.112
.450
.500
Jacketed Cable
OD Al. Tube
22.23
.875
OD Al. Tube
7.62 BC
.300
19.25
.758
28.07
1.015
2400
Peak
—
—
OD-15.01 BC
.591
ID-12.22
.481
41.28
1.625
OD Al. Tube
37.39
1.472
44.83
1.765
4700
Peak
1.050
OD-29.39 BC
1.570
79.38
3.125
70.49
83.69
8700
Peak
234
235
PS Helix
PE-IIIA
3.110
.160
50
50
22.0
29.5
ꢀ55 ꢁ80
—
ID-25.78
1.015
2.775
3.295
OD Al. Tube
2.16
.0852
7/0.72
.0284
Taped
PTFE
5.72
.255
11.43
.450
RG 115A 235
w/VI Jacket
2/SC
SIL/DAC VI
ꢀ55 ꢁ250
5000
293
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Appendix D - Typical Coaxial Cable Specifications (Continued)
Max.
RG/U
Type
Cable
Number/Type
DOD of Shielding
Braids
Nom.
Imped.
(Ohms)
Nom.
Cap
pf/ft
Max.
Operating
Temp. (C°)
Inner
Conductor
Dielectric
Material
Jacket
Material
Weight
(lb/ft)
Operating
Voltage
O.D.
Comments
(Volts RMS)
4.11 BC
10.69 12.7 ꢀ.500ꢁ
12.7
1300
Peak
236
237
PS Helix
PS Helix
None
.165
.195
50
50
24.0
24.0
ꢀ55 ꢁ80
ꢀ55 ꢁ80
—
—
.1620
.421
OD Al. Tube
.500
4.11 BC
.1620
10.69 12.7 ꢀ.500ꢁ
15.24
.600
1300
Peak
PE-IIIA
.421
—
OD Al. Tube
238
239
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Use RG 197/U
Use RG 232/U
—
OD-15.01 BC
.591
41.28
1.625
36.07
41.28
240
241
242
PS Helix
—
None
—
.930
—
50
—
50
22.0
—
ꢀ55 ꢁ80
—
4700
—
—
Use RG 233
—
ID-12.22 BC
.481
1.420
1.625
OD Al. Tube
—
—
—
—
OD-29.39
1.157
ID-25.78
1.0150
79.38
3.125
OD Al. Tube
72.39
2.850
79.3
3.125
8700
Peak
PS Helix
None
2.700
22.0
ꢀ55 ꢁ80
243
244
—
—
—
—
—
—
—
—
75
—
—
—
Use RG 234
—
2.59 BC
.102
10.69 12.7 ꢀ.500ꢁ
.421 OD Al. Tube
12.7
.500
1200
Peak
PS Helix
None
.118
15.5
ꢀ55 ꢁ80
2.59 BC
10.69 12.7 ꢀ.500ꢁ
.421 OD Al. Tube
15.24
1200
Peak
245
246
247
PS Helix
PS Helix
PS Helix
PE-IIIA
None
.148
.348
.418
75
75
75
15.5
15.2
15.2
ꢀ55 ꢁ80
ꢀ55 ꢁ80
ꢀ55 ꢁ80
—
—
—
.102
.600
4.78 BC
.1880
19.25 22.23 ꢀ.875ꢁ
.758 OD Al. Tube
22.23
.875
2200
Peak
4.78 BC
.1880
19.25 22.23 ꢀ.875ꢁ
25.78
1.015
2200
Peak
PE-IIIA
.758
OD Al. Tube
OD-9.5 BC
.3740
41.28
1.625
37.39
41.28
4300
Peak
248
249
250
251
PS Helix
PS Helix
PS Helix
PS Helix
None
PE-IIIA
None
.948
1.068
2.395
.175
75
75
75
75
15.0
15.0
15.0
15.0
ꢀ55 ꢁ80
ꢀ55 ꢁ80
ꢀ55 ꢁ80
ꢀ55 ꢁ80
—
—
—
—
ID-6.96
27.40
1.472
1.625
OD Al. Tube
OD-9.5 BC
.3740
ID-6.96
27.40
37.39
1.472
41.28
1.625
44.83
1.765
4300
Peak
18.59 BC
.732
16.05
.632
79.38
3.125
OD Al. Tube
72.39
2.850
79.38
3.125
8500
Peak
18.59 BC
.732
16.05
.632
79.38
3.125
OD Al. Tube
72.39
2.850
32.95
2.805
8500
Peak
PE-IIIA
4.24 BC
11.58 13.46 ꢀ.530ꢁ
.456 OD Al. Tube
13.46
252
253
254
255
PE Tubes
PE Tubes
PE Tubes
PE Tubes
None
PE
.225
.655
.555
.550
50
50
50
50
24.0
24.0
24.0
24.0
ꢀ55 ꢁ80
ꢀ55 ꢁ80
ꢀ55 ꢁ80
ꢀ55 ꢁ80
1000
1000
1860
1860
—
—
—
—
.1670
.530
4.24 BC
.1670
11.58 13.46 ꢀ.530ꢁ
.456 OD Al. Tube
16.64
.655
7.9 BC
.3110
21.16 24.21 ꢀ.953ꢁ
.833 OD Al. Tube
27.94
1.100
PE
7.9 BC
.3110
21.16 24.21 ꢀ.953ꢁ
24.21
.953
None
.833
OD Al. Tube
OD-7.9 SC
.3110
24.21
.953
21.16
24.21
256
257
258
PTFE Tubes
PS Tubes
PS Tubes
None
None
PE
1.200
1.380
.100
50
50
50
24.0
24.0
24.0
ꢀ55 ꢁ80
ꢀ55 ꢁ80
ꢀ55 ꢁ80
1860
3640
3640
—
—
—
ID-6.48
.2550
.833
.953
OD Al. Tube
OD-15.39
.6060
ID-1.23 BC
.4860
45.36
1.786
OD Al. Tube
41.2
1.622
45.36
1.786
OD-15.39
.6060
ID-1.23 BC Tube
.4860
45.36
1.786
OD Al. Tube
41.2
1.622
48.92
1.926
2.92 BC Tube
8.08
9.91 ꢀ.390ꢁ
9.91
259
260
263
PTFE Tubes
PE Tubes
None
PE-IIIA
None
.140
.170
.336
50
50
50
24.0
24.0
21.5
ꢀ55 ꢁ80
ꢀ55 ꢁ80
ꢀ40 ꢁ250
697
697
—
—
—
.1150
.318
OD Al. Tube
.390
2.92 BC Tube
8.08
.318
9.91 ꢀ.390ꢁ
OD Al. Tube
11.43
.450
.1150
4.37 BC
.1720
Air-Space
PTFE
10.69
.421
12.7
.500
1300
Peak
Al. Tube
4 Cond. 19/0.36
.0142
2 TC, 2 BC
4.47
.176
e/core
2 TC, 2 BC
BC Overall
19.05
.750
264
PE
PVC-IIA
.327
36.8
41.0
ꢀ40 ꢁ80
2000
Use RG 264C
294
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Appendix D - Typical Coaxial Cable Specifications (Continued)
Max.
RG/U
Type
Cable
Number/Type
DOD of Shielding
Braids
Nom.
Imped.
(Ohms)
Nom.
Cap
pf/ft
Max.
Operating
Temp. (C°)
Inner
Conductor
Dielectric
Material
Jacket
Material
Weight
(lb/ft)
Operating
Voltage
O.D.
Comments
(Volts RMS)
4 Cond. 19/0.36
.0142
4.47
2 TC, 2 BC
.176
19.05
264A
PE
PUR
.327
36.8
41.0
ꢀ40 ꢁ80
2000
2000
Use RG 264C
BC Overall
e/core
.750
2 TC, 2 BC
4 Cond. 1.73
.068
2 BC, 2 TC
4.72
2 TC, 2 BC
.186
19.43
.765
Watertight
4 Coax.
264C
265
PE
PUR
—
40
50
38.4
22.3
ꢀ40 ꢁ80
ꢀ40 ꢁ80
BC Overall
e/core
17.2 BC Tube
40.08 Copper Clad
1.578 Mild Steel Tube
52.58
2.070
145 KW
Peak
PE Helix
PE-IIIA
.120
—
.6770
0.29 Cond. Over
.0113
3.66 Mag. Core
.144
75 Spiral
7.24 Wound Cond.
10.16
.400
Delay Line Cable
50 ns/ft
266
PE
PVC-I
—
1530
53.0
ꢀ40 ꢁ80
5000 DC
.285
68 BC & 7
are Insulated
Copper Clad
Mild Steel
9.02 BC Tube
30.23
44 KW
Peak
267
268
PS Helix
PE Helix
—
PE-IIIA
None
.234
.430
50
50
22.2
23.0
ꢀ40 ꢁ80
ꢀ55 ꢁ80
—
—
.3550
1.190
Cor. Tubing
4.09 BC
.1610
8.89
.350
Corrugated
BC Tube
12.65
.498
10 KW
Peak
ID-7.29
.2870
20.19 Corrugated
.795 BC Tube
23.53
44 KW
Peak
269
269A
270
PE Helix
PE Helix
PE Helix
PE Helix
None
None
None
None
.430
.875
.875
.125
50
50
50
50
22.2
22.2
22.3
22.3
ꢀ55 ꢁ80
ꢀ55 ꢁ80
ꢀ55 ꢁ80
ꢀ55 ꢁ80
—
—
—
—
OD-9.09 BC
.3580 Tube
1.005
OD-7.29
.2870
ID-9.09 BC
.3580 Tube
20.19 Corrugated
.795 BC Tube
23.53
1.005
44 KW
Peak
ID-14.94
.5880
OD-17.48 BC
.6880 Tube
40.08 Corrugated
1.578 BC Tube
46.48
1.830
145 KW
Peak
ID-14.94
.5880
OD-17.48 BC
.6880 Tube
40.08 Corrugated
46.48
1.830
145 KW
Peak
270A
1.578
BC Tube
0.64
.0250
Extra Flex.
High Temp.
Cable
Air-space
PTFE
2.79
3.68
Extra Flex.
279
280
281
282
283
1/SC
2/SC
2/SC
2/SC
2/SC
FG Braid-V
FEP-IX
Sil./DAC-VI
FEP
.200
.400
.031
.145
.410
75
50
19.5
25.4
25.4
28.2
50.0
ꢀ55 ꢁ250
ꢀ55 ꢁ200
ꢀ55 ꢁ150
ꢀ40 ꢁ150
ꢀ55 ꢁ150
19/0.13 SCCS
.0050
.110
.145
High Temp. Cable
2.91 BC
.1144
Taped
PTFE
8.31
.327
11.89
.468
Low Loss
High Frequency
3000
4000
4500
8000
29 KW
4.8
.1890
19/0.96 SC
.0378
Taped
PTFE
12.7
.500
19.05
.750
Low Loss
High Power
50
0.64 SC
.0253
Irradiated
PE
2.51
.099
5.08
.200
54.5
46
—
—
1.49
.0585
19/0.3 SC
.0117
7.31
.288
12.07
.475
Rubber-D
Sil.
5.59 BC
.220
20.19 Corrugated
.795 BC Tube
25.53
1.005
284A
285A
PE Helix
None
None
.430
.720
75
15.0
13.0
ꢀ55 ꢁ80
—
—
2.9 BC
.1140
PTFE
Helix
20.19 Corrugated
.795 BC Tube
25.53
1.005
22 KW
Peak
100
ꢀ55 ꢁ200
OD-10.92
.4300
39.88 Corrugated
1.570 BC Tube
46.48
100 KW
Peak
286
287
288
PE Helix
PE Helix
PE Helix
None
None
None
.750
3.000
3.000
75
100
50
15.1
13.5
21.6
ꢀ55 ꢁ80
ꢀ55 ꢁ80
ꢀ40 ꢁ80
—
—
—
ID-9.14 BC
.3600 Tube
1.830
5 BC
.1970
39.88 Corrugated
1.570 BC Tube
46.48
1.830
73 KW
Peak
OD-8.46
.3330
ID-5.64 BC
.2221 Tube
75.18 95.25 CCS
2.960 3.750
95.25
3.750
440 KW
Peak
OD-20.83
.8200
ID-18.8 CCS
.7400 Tube
75.18 95.25 CCS
2.960 3.750
95.25
3.750
290 KW
Peak
289
PE Helix
None
1.040
75
14.7
ꢀ40 ꢁ80
—
10.92 BC Tube
39.88 46.48 ꢀ1.8300ꢁ
PE and
50.8
100 KW
Peak
292
293
PE Helix
PE
.160
.160
75
50
15.1
30.8
ꢀ55 ꢁ80
ꢀ55 ꢁ80
—
.4300
1.570 Corr. BC Tube Flooding Comp. 2.000
2.69 BC
.106
9.53
13.84
.545
1/SC
PE-IIIA
7000
Use RG 293A
.375
295
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Appendix D - Typical Coaxial Cable Specifications (Continued)
Max.
RG/U
Type
Cable
Number/Type
DOD of Shielding
Braids
Nom.
Imped.
(Ohms)
Nom.
Cap
pf/ft
Max.
Operating
Temp. (C°)
Inner
Conductor
Dielectric
Material
Jacket
Material
Weight
(lb/ft)
Operating
Voltage
O.D.
Comments
(Volts RMS)
2.69 BC
9.4
13.84
Watertight
RG 217
293A
294
PE
PE
1/SC
.370
PE-IIIA
PE-IIIA
.205
.205
50
95
30.8
16.3
ꢀ55 ꢁ80
ꢀ55 ꢁ80
7000
3000
.106
.545
2 Cond. 2.05
.0808
1 BC, 1 TC
11.99
1/TC
.472
16
.630
Use RG 294A
2 Cond. 2.05
.0808
11.99
1/SC
.472
16
Watertight
RG 130
294A
295
PE
PE
PE-IIIA
PE-IIIA
.420
—
95
50
16.3
30.8
ꢀ55 ꢁ80
ꢀ55 ꢁ80
3000
.630
1 BC, 1 TC
4.95 BC
.1950
17.27
1/SC
.680
22.73
.895
Watertight
RG 218
11,000
5.97
.2352
Silicone
Rubber
23.01
1/SC
.906
30.23
296
297
298
301
Neoprene
None
—
50
50
—
50
36.4
21.4
—
ꢀ55 ꢁ80
ꢀ55 ꢁ200
ꢀ55 ꢁ80
ꢀ55 ꢁ200
13,800
—
—
37/0.85 SC
.0336
1.190
OD-9.02
.3550
ID-7.29 BC
.2870 Tube
PFTE
Helix
20.19 Corrugated
25.53
1.005
44 KW
Peak
.090
.056
.031
.795
BC Tube
15.32
.6030
7/0.51 CCS
.0201
2.92
.115
16.51
.650
Buoyant
Per MIL-C-22667
PE
None
Foam PE
FEP-IX
—
1.55
.0609
7/0.52 HR
.0203
4.7
.185
6.23
.245
FEP Jacketed
RG 126
PTFE
1/HR
29.4
3000
0.64 SCCS
3.71
5.11
FEP Jacketed
RG 140
302
303
304
PTFE
PTFE
PTFE
1/SC
1/SC
2/SC
FEP-IX
FEP-IX
FEP-IX
.030
.088
—
75
50
50
19.5
29.4
29.4
ꢀ55 ꢁ200
ꢀ55 ꢁ200
ꢀ55 ꢁ200
2300
1900
300
.0250
.146
.201
0.99 SCCS
.0390
2.95
.116
4.32
.170
FEP Jacketed
RG 141A
1.5 SCCS
.0590
4.7
.185
7.11
.280
FEP Jacketed
RG 143A
OD-10.92
.4300
39.88 46.48 BC Tube
1.570 1.830
50.55
305
306A
307
FEP
PE-IIIA
PE-IIIA
PE-IIIA
.545
.070
.070
75
75
75
14.4
16.5
16.7
ꢀ55 ꢁ80
ꢀ55 ꢁ80
ꢀ55 ꢁ80
2720
5700
1000
—
ID-9.14
.3600 Tube
1.990
4.39 BC
.1730
20.35 22.23 AI. Tube
25.78
1.015
Foam PE
Foam PE
Per MIL-C-23806
.801
.8750
0.74
.0290
19/0.15 SC
.0058
3.71
2/SC
6.86
.270
Triax
Use to 100 MHz
.146 PUR Interlayer
0.74
.0290
3.71
2/SC
6.86
Triax
307A
316
317
318
319
Foam PE
PTFE
PE-IIIA
FEDP-IX
Neoprene
PE-IIIA
.060
.012
—
75
50
95
50
50
16.7
29.4
15.4
22.0
22.0
ꢀ55 ꢁ80
ꢀ55 ꢁ200
ꢀ55 ꢁ80
ꢀ55 ꢁ80
ꢀ55 ꢁ80
1000
1200
19/0.15 SC
.0058
.146 PUR Interlayer
.270
Use to 100 MHz
0.51
.0201
7/0.17 SCCS
.0067
1.52
1/SC
.060
2.59
.102
FEP Jacketed
RG 188A
2 Cond. 2.21
.0870
7/0.74 BC
.0290
11.33
1/TC
.446
18.03
.710
Water
Blocked
FEP
10,000
OD-9.09 BC
.3580 Tube
ID-7.29
25.53
20.19
.795
28.58
1.125
44 KW
Peak
PE Helix
PE Helix
1.005
Corr. BC Tube
.530
1.040
—
—
.2870
OD-17.48 BC
.6880 Tube
ID-14.94
.5580
46.48
39.88
1.570
50.8
2.000
145 KW
Peak
1.830
Corr. BC Tube
PE-IIIA
None
OD-28.96
1.1400
Corr. BC Tube
79.39
72.39
2.850
320 KW
Peak
321
322
PE Helix
PE Helix
—
—
2.850
1.210
1.780
50
50
21.7
21.7
ꢀ55 ꢁ80
ꢀ55 ꢁ80
—
—
Corr. BC Tube
OD-28.96
1.1400
Corr. BC Tube
79.39
2.850
Corr. BC Tube
PE & Flood
Comp.
77.22
3.040
320 KW
Peak
296
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Appendix D - Typical Coaxial Cable Specifications (Continued)
Max.
RG/U
Type
Cable
Number/Type
DOD of Shielding
Braids
Nom.
Imped.
(Ohms)
Nom.
Cap
pf/ft
Max.
Operating
Temp. (C°)
Inner
Conductor
Dielectric
Material
Jacket
Material
Weight
(lb/ft)
Operating
Voltage
O.D.
Comments
(Volts RMS)
24.89
7.92 BC Tube
PE & Flood
Comp.
26.92
323
324
Foam PE
Foam PE
—
—
.980
.420
.320
50
50
25.6
25.6
ꢀ55 ꢁ80
ꢀ55 ꢁ80
1480
1480
—
—
.312
1.060
Corr. BC Tube
24.89
.980
Corr. BC Tube
7.92 BC Tube
24.89
.980
None
PUR
.312
2.54
.1000
19/0.51 SC Al.
.0200
6.6
.260
2/SC Strip
Braids
8.89
.350
325
326
PE Spline
PE Spline
PE Spline
.10
.24
50
50
26.3
26.3
ꢀ55 ꢁ80
ꢀ55 ꢁ80
750
Low Loss
Low Loss
5.08
.2000
19/1.02 SC Al.
.0400
13.97
.550
2/SC Strip
Braids
17.7
.697
PUR
1700
8.13
.3200
19/1.63 SC Al.
.0640
21.34
.840
2/SC Strip
Braids
25.65
1.010
327
328
329
PUR
.55
1.469
.353
50
25
50
26.3
85.0
50.0
ꢀ55 ꢁ80
ꢀ55 ꢁ80
ꢀ55 ꢁ80
2500
Low Loss
—
12.32 TC Braid
Rubber
H.J.H.
27.05
1.065
3/TC,
GS, TC
37.08
1.460
Neoprene
Neoprene
20,000
15,000
.4850
1.49
.0585
19/0.3 TC
.0117
Rubber
H.J.H.
9.65
.380
3/TC,
GS, TC
17.78
.700
—
6.15
330
331
332
333
334
335
336
360
SC
Foam PE
Foam PE
Foam PE
Foam PE
Foam PE
Foam PE
Foam PE
Foam PE
—
1/SC
—
—
50
50
50
50
75
75
75
50
25.0
25.0
25.0
25.0
17.0
17.0
17.0
25.0
—
—
—
.242
4.11 BC
.1620
11.43 12.7 Al. Tube
.450 .500
15.24
.600
Jacketed 231
Solid Conductor
PE-IIIA
None
.187
.466
.548
.109
.143
.315
.397
ꢀ55 ꢁ80
ꢀ55 ꢁ80
ꢀ55 ꢁ80
ꢀ55 ꢁ80
ꢀ55 ꢁ80
ꢀ55 ꢁ80
ꢀ55 ꢁ80
2500
4500
4500
2500
2500
4000
4000
7.11 BC
.2800
20.35 22.23 Al. Tube
.801 .8750
22.23
.875
Per MIL-C-23806
Jacketed RG 332
Per MIL-C-23806
Jacketed RG 334
Per MIL-C-23806
Per MIL-C-23806
7.11 BC
.2800
20.35 22.23 Al. Tube
.801 .8750
25.78
1.015
PE-IIIA
None
2.49 BC
.0980
11.43 12.7 Al. Tube
.450 .500
12.7
.500
2.49 BC
.0980
11.43 12.7 Al. Tube
.450 .500
15.88
.625
PE-IIIA
None
4.39 BC
.1730
20.35 22.23 Al. Tube
.801 .8750
22.23
.875
6.17 BC
.2430
17.17 19.05 Al. Tube
20.95
.825
PE-IIIA
.676
—
.7500
13.72
.540
Corr. BC Tube
4.06
.1600
15.75
.620
366
367
Foam PE
PE Helix
PE-IIIA
PE-IIIA
—
50
50
62.6
21.7
ꢀ55 ꢁ80
ꢀ55 ꢁ80
4000
—
—
12.7
.5000
Corr. BC Tube
Corrugated
BC Tube
132.08
5.2000
830 KW
Peak
—
4.590
2.97 BC
8.08 9.91 Al. Tube
.318 .390
11.94
369
370
374
376
377
PE Tubes
PE Tubes
PE
PE-IIIA
None
.140
.100
.097
.390
.170
50
50
—
50
50
24.0
24.0
—
ꢀ55 ꢁ80
ꢀ40 ꢁ80
ꢀ55 ꢁ80
ꢀ55 ꢁ80
ꢀ55 ꢁ250
700
700
—
—
.1170
.470
2.97 BC
.1170
8.08 9.91 Al. Tube
9.91
.390
.318
.390
0.72 BC
.0285
4.06
.160
16.51
.650
Buoyant
Antennna
None
Foam PE
PE-IIIA
None
—
7.92 BC Tube
26.92
1.060
Foam PE
PTFE Tubes
—
—
Corr. Al. Tube
26.0
24.0
6000
1000
—
—
.3120
4.19 SC Tube
13.46 Al. Tube
13.36
.530
.1650
.5300
46.48
1.830
18.11 BC Tube
50.8
145 KW
Peak
378
383
PE Helix
—
PE-IIIA
.620
—
50
22.1
—
ꢀ55 ꢁ80
ꢀ55 ꢁ80
—
.7130
2.000
Corr. Al. Tube
2 Cond. 1.02
.0403
2000 lb. Break
16.51
.650
Exper. Buoyant
Twisted Pair
PE
PE
—
—
None
Foam PE
100
—
1.29 BC
.0508
1/Flat BC Braid
Waterproofed
16.51
.650
Buoyant Antennna
600 psig.
384
385
Foam PE
Optional
—
50
50
30.8
25.0
ꢀ55 ꢁ80
—
3.89 SC
.1530
Semi-Solid
PTFE
10.8 12.7 Corr. Al.
.425 .500
16.76
.660
Low Loss
No Press. Req.
.178
ꢀ55 ꢁ250
1500
297
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Appendix D - Typical Coaxial Cable Specifications (Continued)
Max.
RG/U
Type
Cable
Number/Type
DOD of Shielding
Braids
Nom.
Imped.
(Ohms)
Nom.
Cap
pf/ft
Max.
Operating
Temp. (C°)
Inner
Conductor
Dielectric
Material
Jacket
Material
Weight
(lb/ft)
Operating
Voltage
O.D.
Comments
(Volts RMS)
1.29 CCS
None
—
16.51
Buoyant Antennna
400 lb. Break
386
388
389
PE
PE
Foam PE
PE-IIIA
PE-IIIA
—
—
—
50
50
—
ꢀ55 ꢁ80
ꢀ55 ꢁ80
ꢀ55 ꢁ80
—
—
.0508
Non-hosing
.650
11.28
—
13.84
.545
Watertight
See RG 14A
CS
30.8
22.8
.444 Max. SC
6.35 BC Al.
.2500
16.13
2/SC
.635
22.23
.875
Low Loss
Replaces RG 189
PE Spline
.336
2000
1.22
.048
Cond. PE
and PE
7.24
1/TC
.285
10.29
Low Noise
Cable
391
392
393
397
400
PVC-IIA
.092
.114
.165
.125
.050
72
72
50
50
50
—
—
ꢀ55 ꢁ80
ꢀ55 ꢁ80
ꢀ55 ꢁ200
ꢀ55 ꢁ200
ꢀ55 ꢁ200
5000
5000
5000
2000
1900
7/0.4 TC
.0159
.405
1.22
.048
7/0.4 TC
.0159
Cond. PE
and PE
7.24
1/TC
.285
PVC-IIA
w/Armor
12.07
.475
Armored
RG 391
2.38
.0936
7/0.79 SC
.0312
7.24
2/SC
.285
9.91
.390
Moistureproof
RG 225
PTFE
FEP-IX
FEP-IX
FEP-IX
29.4
28.0
29.3
2.44
.096
7/0.81 SC
.032
Air-space
PTFE
6.86
2/SC
.270
8.89
.350
Low Loss
RG 393
0.98
.0385
19/0.2 SPC
.0077
2.95
2/SC
.116
4.95
.195
PTFE
—
6.35 OD
1.64 SPC
5.46
6.35
401
402
PTFE
PTFE
.250
None
None
.081
.032
50
50
29.3
29.3
ꢀ40 ꢁ125
ꢀ40 ꢁ125
3000
2500
Semirigid
Semirigid
.0645
.215
.250
Copper Tube
3.58 OD
0.91 SCCS
.0360
3.02
.119
3.58
.141
.141
Copper Tube
0.3 SCCS
.012
7/0.1
.004
0.86
2/SC
2.95
.116
Triaxial
RG 178B
403
PTFE
FEP-IX
.0075
50
29.3
ꢀ55 ꢁ200
2500
.034 FEP Interlayer
0.3 SCCS
.012
PTFE and
0.86
1/SC
.034
1.83
31.5
Low Loss
RG 178B
404
405
FEP-IX
None
.0054
.015
50
50
ꢀ55 ꢁ200
ꢀ40 ꢁ125
2000
1500
7/0.1
.004
Cond. PTFE
.072
Max.
2.18 OD
.086
0.51 SCCS
.0201
1.68
.066
2.19
.0865
PTFE
29.4
Semirigid
Copper Tube
298
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Appendix E - Maximum Power Handling Capabilities for Cables
(Average Input Power in Watts)
Frequency in MHz
RG/U
Type Cable
10
2,000
3,700
3,700
2,500
6,000
1,700
800
50
800
100
550
200
350
540
540
400
800
280
137
125
110
200
200
180
4,300
70
400
230
350
350
260
480
190
90
1,000
125
190
190
150
260
110
53
3,000
60
5,000
40
10,000
22
5, 5A, 5B
8, 8A, 10A, 213, 215
1,300
1,300
1,000
2,000
650
850
95
65
37
9, 9A, 9B, 214
850
95
65
37
11, 11A, 12, 12A, 13, 13A, 216
650
70
50
26
217
1,200
430
120
50
85
50
22, 22B
38
20
55, 55A, 55B, 223
310
205
28
20
10
58, 58B
730
280
180
85
50
25
17
—
—
15
58A, 58C
650
225
170
75
44
22
15
59, 59A, 59B
1,300
1,300
1,150
25,000
340
480
310
135
135
120
2,800
50
77
40
27
62, 62A, 71, 71A, 71B
480
310
77
40
27
15
62B
420
280
69
35
25
14
115, 115A, 165, 225, 393
9,500
145
6,300
100
1,700
30
880
15
620
—
12
350
—
—
140
190
350
41
108, 108A
122
540
205
140
90
60
35
18
140, 141, 141A, 142, 142B, 302, 303, 400, 402
9,000
11,500
25,000
1,600
170
3,500
4,600
9,500
780
2,400
3,200
6,300
570
1,600
2,100
4,300
420
36
1,100
1,450
2,800
310
25
650
850
1,700
200
16
350
460
880
110
—
41
245
330
620
76
143, 143A
144
161, 179, 179A, 179B, 187, 187A
174, 174A
72
50
—
28
—
14
178, 178A, 178B, 196, 196A
180, 180A, 180B, 195, 195A
188, 188A, 316
710
340
240
170
570
330
1,600
123
400
240
1,100
78
2,500
1,250
8,500
1,100
600
800
250
160
620
135
80
93
50
450
57
30
210
3,300
2,300
310
220
140
Note: Values above 3 GHz vary considerably depending on construction.
Conditions
Ambient: 40°C
Altitude: Sea level
Center Conductor Temperature:
80°C for polyethylene
200°C for PTFE
299
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Appendix F - Nominal Loss Characteristics for Cables
(Decibels per Hundred Feet)
Frequency in MHz
RG/U
Type Cable
10
.80
50
1.40
1.50
1.50
1.50
1.00
2.80
3.00
3.10
3.30
2.30
1.90
2.10
1.40
5.20
4.40
2.70
1.80
1.00
7.90
6.50
10.00
4.20
7.90
.58
100
2.90
2.20
2.20
2.20
1.40
4.20
4.30
4.60
4.90
3.30
2.80
3.00
2.10
7.50
6.90
3.90
2.50
1.60
9.80
8.90
13.30
5.10
11.50
.85
200
4.30
3.20
3.20
3.20
2.10
6.30
6.00
7.00
7.30
4.70
3.70
4.30
3.10
11.00
11.00
5.50
3.80
2.30
12.70
12.00
20.00
7.30
15.00
1.30
400
6.40
1,000
11.00
9.00
3,000
22.00
19.00
19.00
19.00
13.00
—
5,000
30.00
28.00
28.00
28.00
19.00
—
10,000
52.00
47.00
47.00
—
5, 5A, 5B
8, 8A, 10A, 213, 215
.66
4.60
9, 9A, 9B, 214
.66
4.60
9.00
11, 11A, 12, 12A, 13, 13A, 216
.66
4.60
9.00
217
.41
3.10
5.80
31.00
—
22, 22B
1.20
1.35
1.20
1.40
1.10
.90
9.50
—
55, 55A, 55B, 223
8.80
16.50
17.50
20.00
11.50
8.50
36.00
38.00
41.00
25.50
18.40
23.50
14.00
54.00
57.20
26.00
18.10
15.10
43.00
64.30
78.00
36.00
58.00
6.50
51.00
—
85.00
—
58, 58B
10.00
11.00
6.70
58A, 58C
—
—
59, 59A, 59B
41.00
29.50
36.00
21.00
—
—
62, 62A, 71, 71A, 71B
5.20
—
62B
.90
6.10
10.50
7.50
—
115, 115A, 165, 225, 393
.60
4.50
35.00
—
108, 108A
2.30
1.60
1.20
.85
16.00
16.60
8.00
26.20
29.20
13.00
9.70
122
89.00
36.00
26.10
—
—
140, 141, 141A, 142, 142B, 302, 303, 400, 402
62.00
40.70
—
143, 143A
5.70
144
.38
3.80
7.00
161, 179, 179A, 179B, 187, 187A
174, 174A
5.00
3.80
5.30
3.10
3.80
.23
15.80
17.50
27.50
10.40
20.00
1.90
25.00
31.00
45.00
16.50
30.00
3.10
62.50
97.00
115.00
49.50
79.00
9.00
135.00
185.00
172.00
89.00
133.00
15.00
178, 178A, 178B, 196, 196A
180, 180A, 180B, 195, 195A
188, 188A, 316
210
Note: Values above 3 GHz vary considerably depending on construction.
Conditions
Ambient: 20°C
300
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Appendix G - Glossary of Terms
A
circular mil area (CMA) A unit of area equal to the area of a circle
whose diameter is 1 mil (0.001 inch). Used chiefly in specifying cross-
sectional areas of conductors. (See Tyco Electronics Brochure No. 4402-8,
Computing Circular Mil Area for Tyco Electronics Terminals and Splices).
ambient The atmospheric conditions surrounding a given item. Normally in
terms of factors which influence or modify, such as temperature, humidity, etc.
amplitude The magnitude of variation in a changing quantity from its zero
value. The word requires modification - as with adjectives such as peak,
maximum, rms, etc. - to designate the specific amplitude in question.
closed entry contact A female contact designed to prevent the entry of a
pin or probing device having a cross-sectional dimension (diameter) greater
than the mating pin.
arc voltage voltage that continues to pass through a surge protector dur-
coaxial cable A transmission line consisting of two conductors concen-
tric with and insulated from each other. In its flexible form it consists of
either a solid or stranded center conductor surrounded by a dielectric. A
ing activation of GDT(approx. 20 volts )
attenuation A reduction in power. It occurs naturally during wave travel
through lines, waveguides, space or a medium such as water. It may be pro- braid is then woven over the dielectric to form an outer conductor. A weath-
duced intentionally by placing an attenuator in a circuit. The amount of
attenuation is generally expressed in decibels per unit of length.
erproof plastic covering, usually vinyl, is placed on top of the braid.
connector A coupling device employed to connect conductors to one cir-
cuit with those of another circuit. Used to provide rapid connect/disconnect
mating with pc boards, posts or another connector.
B
connector assembly Includes housing and contact plus additional com-
ponents such as hardware used to hold the assembly together and/or make
the assembly a functional connector.
contact An electrically conductive component designed for use in a multi-
circuit connector.
back mounted A connector attached to the inside of a panel or box with
its mounting flanges inside the equipment.
bayonet coupling A quick coupling device for plug and receptacle con-
nectors. Pins projecting from the outside of the cylindrical receptacle
engage with corresponding cam slots in the bayonet plug.
bellmouth Flared at the mouth. The rear of a properly crimped wire barrel
will have a slight flare (bellmouth) to relieve the strain on the wire strands
as they leave the area of high compression and take their natural “lay”. A
bellmouth condition may also be present in front of the wire barrel.
black box A term used to refer to any assembly or subassembly, usually
electronic, that can readily be installed or removed from a larger system.
BNC Connector A radio frequency connector covered by Military
Specification. It has an impedance of 50 or 75 ohms, and is designed to
operate in the 0 to 4 GHz frequency range. It features quick connect/discon-
nect by pin and cam bayonet coupling.
contact cavity A defined hole in the connector insert or housing into
which the contact must fit. See also: cavity.
contact durability The number of insertion and withdrawal cycles that a
connector must be capable of withstanding while remaining within the per-
formance levels of the applicable specification.
contact engaging and separating force Force required to either
engage or separate contacts. Values are generally established for maximum
and minimum forces.
contact inspection hole A hole, perpendicular to the cylindrical rear
portion of screw machined contacts, used to check the depth to which wire
has been inserted into the barrel.
contact resistance Measurement of electrical resistance of mated con-
tacts when assembled in a connector under typical service use. Electrical
resistance is determined by measuring from the rear of the electrical area of
one contact to the rear of the contact area of the mating contact (excluding
both crimps) while carrying a specified test current.
contact shoulder The flanged or enlarged portion of a contact that pre-
vents it from being over-inserted into the appropriate contact cavity. The
shoulder may also contribute to proper orientation and stability with the
connector housing.
contact, two-piece A contact made of two separate parts joined by
swedging, brazing or other means of fastening to form a single contact.
While this provides the mechanical advantages of two metals, it also has the
inherent electrical disadvantage of difference in conductivity.
corona A discharge of electricity appearing as a bluish-purple glow on the
surface of, and adjacent to, a conductor when the voltage gradient exceeds a
certain critical value. It is caused by the ionization of surrounding air by
high voltage.
crimp The final configuration of a terminal barrel after the necessary com-
pression forces have been applied to cause a functional union between the
terminal barrel and the wire.
crimp height A top to bottom measurement of the crimped barrel, using a
crimp height comparator in the prescribed manner. (Refer to
Tyco Electronics Instruction Sheet 7424).
crimping dies A term used to identify the shaping tools that, when
moved toward each other, produce a certain desirable shape to the barrel of
the terminal or contact that has been placed between them. Crimping dies
are often referred to as die sets or as die inserts.
body Main or largest portion of a connector to which other portions are
attached.
braid A weave of metal fibers used as a shield covering for an insulated
conductor or group of insulated conductors. When flattened it may be used
as a grounding strap.
broad-band E Interference generated over a wide range of frequencies
(e.g., automotive ignition noise).
bulkhead A term used to define a mounting style of connectors. Bulkhead
connectors are designed to be inserted into a panel cutout from the rear
(component side) of the panel.
C
cable Either a standard conductor, with or without insulation and other
coverings, or a combination of conductors insulated from each other.
cable assembly A completed cable and its associated hardware.
capacitance The property of an electrical conductor (dielectric in a
capacitor) that permits the storage of energy as a result of electrical dis-
placement. The basic unit of capacitance is the farad, however, measure-
ment is more commonly in microfarads or picofarads.
cavity A metallic enclosure in some types of tubes and circuits within
which resonant fields may be excited at the microwave frequency to which
the cavity is tuned. Usually referred to as resonant cavity. See also: contact
cavity.
characteristic impedance The ratio of voltage to current at any point
along a transmission line on which there are no standing waves.
301
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Appendix G - Glossary of Terms (Continued)
crimping head Tooling containing jaws and linkage for use in pneumatic
electromagnetic interference (EMI) Unwanted electrical or electro-
or hydraulic powered units to crimp loose-piece contacts/terminals that may magnetic energy that causes undesirable responses, degrading performance
be too large for hand tool applications.
crimping tool A term commonly used to identify a hand held mechanical
device that is used to crimp a contact, terminal or splice.
crosstalk A magnetic or electrostatic coupling which causes the unwanted mets, potting or other means to keep out moisture, dust, air or dirt which
transfer of energy from one circuit (disturbing circuit) to another circuit
(disturbed circuit)
or complete malfunctions in electronic equipment. See also: noise.
electromotive force (emf) See voltage.
environmentally sealed A unit is provided with gaskets, seals, grom-
might reduce or impair its performance.
current rating The maximum continuous electrical flow of current recom-
mended for a given situation. It is expressed in amperes.
F
cycle One complete sequence of values of an alternating quantity, includ-
ing a rise to maximum in one direction and return to zero; a rise to maxi-
mum in the opposite direction and return to zero. The number of cycles
occurring in one second is called the frequency.
feedthrough A connector or terminal block, usually having double-ended
terminals, which permits distribution and bussing of electrical circuits. Also
used to describe a bushing in a wall or bulkhead, separating compartments
at different pressure levels, with terminations on both sides.
ferrule A short tube used to make solderless connections to shielded or
coaxial cable. Also molded into the plastic inserts of multiple contact con-
nectors to provide strong, wear-resistant shoulders on which contact retain-
ing springs can bear.
flange A projection extending from or around the periphery of a connector
and having holes that provide for mounting the connector to a panel or to a
mating connector.
D
daisy chain A cable assembly with common wires jumpering three or
more connections/connectors. The term is also used as a verb, implying to
connect in jumper manner.
dB Abbreviation—see decibel.
frequency modulation (fm) A scheme for modulating a carrier fre-
quency in which the amplitude remains constant but the carrier frequency is
displaced in frequency proportionally to the amplitude of the modulating
signal. An fm broadcast is practically immune to atmospheric and man-
made interference.
fretting corrosion A form of excellerated oxidation that appears at the
interface of contacting materials undergoing slight cyclic relative motion. All
non-nobel metals (tin) are susceptible to some degree of fretting corrosion
and will suffer contact resistance increases.
D.C. sparkover voltage defined as the maximum voltage across a
device before it discharges the energy to ground when subjected to a slowly
rising voltage ramp. A rate of rise of 100V/s is usually chosen for testing
purposes.
decibel A unit expressing the ratio of two voltages, currents or powers.
It is equal to 20 times the common logarithm of the ratio of two voltages
across or two currents through equal loads, or 10 times the common loga-
rithm of the two powers. One decibel is approximately the smallest change
in audible power that can be recognized by the human ear.
front mounted A connector is said to be front mounted when it is
attached to the outside of the mating side of a panel. A front mounted con-
nector can only be installed or removed from the outside of the equipment.
die closure Term used to designate a crimping area (crimping chamber)
when the dies are fully closed or bottomed. Die closure is checked with
go/no go plug gage to insure that the crimp produced by the tooling satis-
fies the crimp height specification.
dielectric A material that serves as an insulator. The amount of resistance
to voltage in a given insulation.
G
dielectric withstanding voltage The maximum potential gradient that a
gas discharge tube (GDT) hermetically sealed device containing an
dielectric material can withstand without failure.
inert gas.
discontinuity Rated interconnection: a broken connection (open circuit)
or the loss of a specified connection characteristic. Transient phenomena:
Short term (temporary) interruption or unacceptable variation in current or
voltage.
GHz See gigahertz.
giga A prefix meaning one billion (109).
gigahertz (GHz) One billion cycles per second (109 cps).
glow mode condition in which the GDT continues to conduct after an
impulse passed. Characterized by a visible glow in the device caused by
over-heating.
ground A connection, intentional or accidental, between an electrical
circuit and the earth or some conducting body (e.g. chassis) serving in
place of earth.
dissipation Unusable or lost energy, such as the production of unused
heat in a circuit.
distortion An unwanted change or addition to a signal or waveform when
it is amplified. This definition excludes noise which is an extraneous signal
superimposed on the desired signal.
dummy load A dissipative device used at the end of a transmission line
or waveguide to convert transmitted energy into heat, so essentially no
energy is radiated outward or reflected back to its source.
H
dust cap A device attached to a connector to provide protection against
dust and foreign debris.
heat-shrinkable A type of plastic material that has been cross-linked. A
term describing tubes, sleeves, caps, boots, films or other forms of plastic
which shrink to encapsulate, protect or insulate connections, splices, termi-
nations and other configurations.
E
electromagnetic compatibility (EMC) The ability of an electronic
device to operate in its intended environment without its performance being
affected by EMI and without generating EMI that will affect other equipment.
hermetic Airtight, impervious to external influence, as in a hermetic pack-
age. Often used to describe metal-to-metal solder or weld-sealed packages.
302
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Appendix G - Glossary of Terms (Continued)
hermetic seal Hermetically sealed connectors are usually multiple contact interference An electrical or electromagnetic disturbance that causes
connectors where the contacts are bonded to the connector by glass or other
materials and permits maximum leakage rate of gas through the connector of
1.0 micron ft./hr. at one atmosphere pressure for special applications.
hertz (Hz) International standard term for cycles per second. Named after
the German physicist Heinrich R. Hertz (e.g., 60 cycles per second is equal
to 60 hertz or 60 Hz).
undesirable response in electronic equipment.
J
jack A connecting device into which a plug can be inserted to make circuit
connections. The jack may also have contacts which open or close to per-
form switching functions when the plug is inserted or removed. See also:
receptacle.
I
impedance (Z) The total opposition offered by a component or circuit to
the flow of alternating or varying current. Impedance is expressed in ohms
and is similar to the actual resistance in a direct current circuit. In computa-
tions, impedance is handled as a complex ratio of voltage to current.
L
line impedance Impedance as measured across the terminals of a trans-
mission line; frequently the characteristic impedance of the line.
impedance match A condition in which the impedance of a component
or circuit is equal to the internal impedance of the source, or the surge
impedance of a transmission line. This gives maximum transfer of energy
from the source to the load, as well as minimum reflection and distortion.
M
matched impedance The coupling of two circuits in such a way that the
impedance of one circuit equals the impedance of the other.
mate Two join two connectors in a normal engaging mode.
impulse discharge current
I
1-0
0-9
is defined as the peak current of an
impulse which the device can with-
stand ten times (5 of each polarity at
fixed time intervals) without sub-
stantially affecting device perform-
ance. The test normally used to
determine this capacity uses the
8/20ms waveform as depicted below
where T1=8ms and T2=20ms.
B
0-5
maximum discharge current defined as the peak current of an impulse
which the device can withstand once without substantially affecting device
performance.
mega (M) A prefix meaning one million (106).
microwave That portion of the electromagnetic spectrum lying between
the far infrared and conventional radio frequency range. The microwave fre-
quency range extends from 1 GHz to 300 GHz. Microwaves are usually used
in point-to-point communications because they are easily concentrated into
a beam.
A
0-1
0
0
t
T
1
T
T
1 = 1.25T
1
T
2
V
impulse sparkover voltage
defined as the maximum level
1.0
0.9
8
of voltage across a device before it
discharges the energy to ground
when subjected to a voltage impulse.
The three common waveform profiles
used to determine this capacity are:
Military Specification Military requirements. The demand imposed
0.5
0.3
upon a system to meet a military operational need.
A
mismatch The condition in which the impedance of a source does not
match or equal the impedance of the connected load. This reduces power
transfer by causing reflection.
0
T
0
t
=1.67T
1
T
T
T
2
T
L
2
inductance One cause of reactance. An electromagnetic phenomenon in
N
which the expanding and collapsing of a magnetic field surrounding a con-
ductor or device tends to impede changes in current. The effects of induc-
tance become greater as frequencies increase. The basic unit for inductance
is the henry.
narrow-band EMI generated from a device operating at a specific and
limited range of frequencies. See also: electromagnetic interference (EMI).
N Connector A large radio frequency connector covered by Military
Specification. It has an impedance of 50 ohms and is designed to operate in
the 0 to 11 GHz frequency range. It has a threaded coupling and is physi-
cally larger than a TNC connector.
input impedance The impedance that exists between the input terminals
of an amplifier or transmission line when the source is disconnected. The
circuit, signal level and frequency must be specified.
insertion loss The loss in load power due to the insertion of a compo-
nent, connector or device at some point in a transmission system. Generally
expressed in decibels as the ratio of the power received at the load before
insertion of the apparatus, to the power received at the load after insertion.
insulation crimp The area of a terminal splice or contact that has been
formed around the insulation of a wire.
noise An extraneous signal in an electrical circuit, capable of interfering
with the desired signal. Classes of noise include burst of popcorn noise,
intermediate frequency noise at low audio frequencies, white (thermal)
noise, etc. Signals from power supply or ground line coupled into an ampli-
fier output may be considered noise.
insulation grip The ability of certain crimped terminals to hold firmly in
place both the conductor and a small portion of insulation. This prevents
the conductor from being exposed due to insulation receding away from
the terminal.
insulation resistance The electrical resistance between two conductors
separated by an insulating material.
O
“O” crimp An insulation support crimp for open barrel terminals and
contacts. In its crimped form it resembles an “O” and conforms to the shape
of the round wire insulation. “O” crimp is also used to describe the circum-
ferential crimps used on COAXICON ferrules.
interface The two surfaces of a multiple-contact connector that face each
other when the connector is assembled.
303
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Appendix G - Glossary of Terms (Continued)
ohm The unit of measurement for electrical resistance. A circuit is said to
rise time The time required for a component or logic circuit to change
have a resistance of one ohm when an applied emf of one volt causes a cur- from the quiescent to the transient state when an input is applied. (i.e.
rent of one ampere to flow.
elapsed time between application of input and attainment of full output level).
rms Abbreviation for root mean square.
root mean square The effective value of an alternating current, corre-
sponding to the direct current value that will produce the same heating effect.
P
panel mount A method of fixing a connector to a board, panel or frame.
The mounted connector is usually the receptacle or female connector. The
plug or male connector is usually the removable portion.
S
pcb Abbreviation: see printed circuit board.
screw machine contact A contact which is machined from solid bar
permeability (chemical) The passage or diffusion (or rate of passage)
of a gas, vapor, liquid or solid through a barrier without physically or chem-
ically affecting it.
stock.
semi-rigid A cable containing a flexible inner core and a relatively inflexi-
ble sheathing.
permeability (magnetic) The measure of how much better a material is
than air as a path for magnetic lines of force. Air is assumed to have a per-
meability of 1.
sheath The outer covering of a jacket over the insulated conductors to
provide mechanical protection for the conductors. Also known as the exter-
nal conduction surface of a shielded transmission line.
plug In coaxial RF connectors the plug is usually the movable portion, and
is usually attached to a cable or removable assembly. Plugs mate with
receptacles, jacks, outlets, etc.
shield/shielding (cable) A conducting envelope, composed of metal
strands, which enclose a wire, group of wires or cable so constructed that
substantially every point on the surface of the underlying insulation is at
printed circuit board An insulating board serving as a base for a printed ground potential or at some predetermined potential with respect to ground.
circuit. When the printing process is completed, the board may include
printed components, as well as printed wiring.
propagation delay Time required for an electronic digital device, or
transmission network to transfer information from its input to its output.
propagation delay time The time between the application of a digital
input waveform and the corresponding change in input waveform. It is
measured between reference points on the waveforms. The time is generally
different for positive-going and negative-going waveforms.
prototype A model suitable for use in the complete evaluation of form,
design and performance.
shield/shielding (circuit) The metal sleeving surrounding one or more
of the conductors in a wire circuit to prevent interference, interaction or cur-
rent leakage. Shielding protects a circuit against crosstalk.
shock (mechanical) (1) An abrupt impact applied to a stationary object.
(2) An abrupt or nonperiodic change in position, characterized by sudden-
ness, and by the development of substantial internal forces.
SHV Abbreviation for standard high voltage.
sine wave A wave which can be expressed as the sine of a linear function
of time, space or both. A waveform, often viewed on an oscilloscope, of a
pure alternating current or voltage.
pulse A change in the level, over a relatively short period of time, of a sig-
skin effect The tendency of alternating currents to flow near the surface of
the conductor, thus being restricted to a small part of the total cross-sec-
tional area. This effect increases the resistance and becomes more marked
as the frequency rises.
nal whose value is normally constant.
pulse width The length of time that the pulse voltage is at the transient
level. Electronic pulse widths are usually in the millisecond (10-3),
microsecond (10-6) or nanosecond (10-9) range.
sleeve The insulated or metallic covering over the barrel of a terminal.
solder contact A contact or terminal having a cup, hollow cylinder, eyelet
or hook to accept a wire for a conventional soldered termination.
R
standard high voltage (SHV) A quick connect/disconnect connector
series employing a bayonet lock coupling and designated to operate safely
up to 5000 volts AC. It is the industry standard connector specified by the
National Bureau of Standards (NBS) for high voltage use by the Atomic
Energy Commission (AEC).
standing-wave Distribution of current and voltage on a transmission line,
resulting from two sets of waves traveling in opposite directions.
standing wave ratio The ratio between maximum and minimum current
or voltage along a line. It is a measure of the mismatch between the load
and the line. It is equal to 1 when the line impedance is perfectly matched to
the load. (In which case the maximum and minimum are the same, as cur-
rent and voltage do not vary along the line). The perfect match would be a 1
to 1 ratio.
receptacle In coaxial RF connectors, the receptacle is usually the fixed
or stationary portion that is mounted to the panel. In shell-type, multiple-
contact connectors the receptacle usually contains the pin contacts and
is mounted on the “cold” side of a circuit such as in a drawer or black
box. Receptacles mate with plugs. See also: jack.
residual impulse defined as the voltage that will pass through the device
prior to activation of the GDT.
residual voltage defined as the small amount of voltage left on the line
after an impulse passes.
resonance A frequency at which captive reactance and inductive reactance
are equal and therefore cancel one another’s effects.
RF Abbreviation for radio frequency.
super high frequency (shf) The Federal Communications Commission
designation for the band from 3,000 to 30,000 MHz in the radio spectrum.
RG/U Symbol used to designate coaxial cables that are made to
Government Specification (e.g., RG 58U; in this designation the “R” means
radio frequency, the “G” means Government, the “58” is the number
assigned to the government approval, and the “U” means it is a universal
specification).
T
tensile The amount of axial load (longitudinal stress) required to break or
pull the wire from the crimped barrel of the terminal, splice or contact.
304
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Appendix G - Glossary of Terms (Continued)
tensile strength The greatest longitudinal stress that a substance or
volt (V) The unit of measurement for electromotive force (emf). It is equiva-
lent to the force required to produce 1 ampere through a resistance of 1
ohm.
voltage (E) The term most often used to designate electrical pressure that
exists between two points and is capable of producing a flow of current
union can bear without tearing or pulling apart. In crimped terminations, it
is the greatest longitudinal stress that a terminal can bear without the wire
separating from the terminal.
thermal shock The effect of heat or cold applied at such a rate that
nonuniform thermal expansion or contraction occurs within a given material when a closed circuit is connected between the two points. Voltage is meas-
or combination materials. The effect can cause inserts and other insulation
materials to pull away from metal parts.
time-delay A circuit that delays the transmission of an impulse for a defi-
nite and desired period of time.
TNC Connector A radio frequency connector covered by Military
Specification. It has an impedance of 50 ohms and is designed to operate in
ured in volts, millivolts, microvolts and kilovolts. The terms electromotive
force (emf), potential, potential difference and voltage drop are often referred
to as voltage.
voltage drop The voltage developed across a component or conductor by
the flow of current through the resistance or impedance of that component
or conductor.
a 0 to 11 GHz frequency range. Reliability is assured by a threaded coupling voltage hold over refers to the maximum line voltage at which recovery
that can be safely wired to prevent accidental disconnect.
of the GDT to its inactive state will take place within
a specified period of time (normally 150ms) after an induced lightning
pulse (normally 10/1000ms) has been applied.
U
VSWR Abbreviation for voltage standing wave ratio. Also see: standing
wave ratio.
UG Symbol used to describe coaxial connectors that were made to a
Government specification. This specification is now obsolete.
ultra-high frequency (uhf) A Federal Communications Commission
designation for the band from 300 to 3000 MHz on the radio spectrum. In
television - channels 14 to 83 or 470 to 890 MHz.
W
wavelength The distance between two points which are in phase on adja-
cent waves. It is the distance traveled by the wave in the same span of one
cycle. Electromagnetic waves (both light and radio) have a speed in space
of about 300,000,000 meters (186,000 miles) per second. Thus wavelength
in meters is equal to 300,000,000 divided by frequency.
V
very high frequency (vhf) A Federal Communications Commission
designation for the band from 30 to 300 MHz on the radio spectrum.
voice-frequency (vf) Any frequency within that part of the radio fre-
quency range essential to speech transmission of a commercial quality (i.e.,
300 to 3400 Hz). Also referred to as telephone frequency.
Z
Z Letter symbol used to represent impedance in ohms.
305
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
RF Coaxial Solutions for Communications Equipment
Wireless
Base Station
Carrier Rack
Equipment
Chassis
Set Top Box
NIC Card
306
Catalog 1307191
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Revised 3-07
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Wireless Base Station
Radio base station cabinets panel mount connectors.
demand packaging that
combines high power r.f.
signals, high speed digital
data, and analog signals.
Cabinet input/output con-
nections are provided by N
Transceiver modules utilize
MCX, and SSMT board and
cable connectors for board
to board and panel to
board applications. Finally,
both semi-rigid and flexible
Series and 7/16 connectors. RG cable assemblies route
Plug-in r.f. modules require
Blindmate, DIN inserts, and
signals throughout the
entire cabinet.
7-16 Series Connectors, Page 7
SMA Connectors
Page 100
Lightning Protection Connectors,
Page 12
SMB Connectors
Page 176
7-16 Series
Cable Assemblies,
Page 269
N Series
Cable Assemblies,
Page 269
N Series Connectors,
Page 20
MCX Connectors,
Page 196
SSMT Connectors,
Page 212
TNC Connectors,
Page 29
SMP Subminiature
Blindmate Connectors,
Page 152
DIN Inserts, Page 238
COAXICON Contacts,
Page 244
SIEMAX Connectors,
Page 249
307
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
www.tycoelectronics.com
C. America: 52-55-1106-0803
UK: 44-8706-080-208
RF Coax Connectors
Carrier Rack Equipment
For today’s fast paced
ments, 50 or 75 ohms, from
rack based equipment to
RF connection for pcb and
panel applications, and
Carrier Equipment market,
Tyco Electronics offers a
broad line of RF intercon-
nect products that meet
demanding customer
set top boxes. Styles range offer superior packaging
from standard miniature RF
connectors such as F
series, BNC and TNC to
density. Between Series
adapters are available,
along with connectors
requirements for CATV, tele-
com and data transmission
applications. Connectors,
cable assemblies, and
applicator tooling are avail-
able for applications rang-
ing from central office to
customer premise environ-
subminiature RF connectors meeting international DIN
such as SMA, SMB, SMC
and Blindmate connectors,
to Micro miniature MMCX,
SSMT and SMT/QuickGrip
products. SIEMAX connec-
tors provide multi-positional
surface mount technology
and IEC standard inter-
faces. High performance
GHz range BNC connectors
meet the needs for faster
signaling.
BNC Connectors,
Page 44
SMA Connectors,
Page 100
G Series Connectors,
Page 98
SMB Connectors,
Page 176
TNC Connectors,
Page 29
DIN Inserts, Page 238
SIEMAX Connectors,
Page 249
F Series Connectors,
Page 93
MMCX Connectors,
Page 218
308
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Chassis, NIC Card and Set Top Box
Coaxial interconnects have
evolved in the enterprise
market place over the
years. The BNC interfaces
that once dominated the
Ethernet premise installa-
tions to coax products that
provide high speed access
to the carrier infrastructure.
noise and ground loop
SMB interface is the one of
choice for improved density
and is available in both
commercial and MIL-type.
Again, our portfolio has a
wide variety of configura-
tions to address your sys-
tem requirements.
currents.
For the infrastructure, the
standard coaxial interfaces
to the infrastructure include
both 50 and 75 ohm BNC
connectors. The BNC fam-
ily features numerous styles
including cable plugs and
jacks, adapters and printed
circuit board connectors.
To address manufacturabil-
Lastly, as broadband CATV
becomes more prevalent
for internet access in cable
modems, our family of
In today’s environment,
Network Interface Cards
(NIC) still feature
Capacitively Decoupled
BNC connectors with built-
ity, we offer the board mount F connectors offer a high
in SMT, wave solder, and performance solution.
in chip capacitors to reduce press fit. More recently, the
Chassis
BNC Connectors, Page 44
SMB Connectors, Page 176
F Connectors,
Page 93
Decoupled
BNC, Page 82
Set Top Box
NIC Card
309
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Non-RoHS to RoHS Compliant Part Number Cross Reference
Non-RoHS RoHS Compliant
Non-RoHS RoHS Compliant
Part No.
Non-RoHS RoHS Compliant
Part No.
Non-RoHS RoHS Compliant
Part No.
Part No.
Part No.
Part No.
222092-1
222092-3
222093-1
222117-1
222132-1
222165-2
222420-1
222462-1
222506-1
222506-5
222506-6
225089-4
225092-8
225349-9
225361-2
225361-4
1-225361-2
225363-1
225392-2
225395-1
225395-2
225395-3
225395-6
225395-7
225395-8
1-225395-0
2-225395-0
4-225395-1
4-225395-2
225396-1
225396-2
225396-7
225397-1
225397-2
225397-7
225398-1
225398-3
225398-6
225398-7
225398-8
1-225398-5
225554-6
1-225554-1
225555-2
225555-6
225555-7
225555-8
225557-6
225559-2
225559-8
225661-1
225661-2
1-225661-3
1-225661-6
225662-2
1-225662-8
225664-1
225664-2
1-225664-2
1-225667-6
225669-1
Part No.
225669-2
225699-1
225886-1
225886-4
225886-5
225886-7
225974-1
225974-2
225974-5
226978-1
226978-3
226990-1
226990-3
226990-6
226993-1
226993-2
226993-3
226993-6
227079-5
227079-6
227079-7
1-227079-1
1-227079-6
1-227079-9
2-227079-2
4-227079-3
5-227079-3
6-227079-1
6-227079-7
6-227079-8
8-227079-2
1-227086-0
227161-1
227161-2
227161-3
227161-6
227161-7
227161-9
227169-5
227169-7
227169-8
227222-1
227222-2
227222-3
227222-6
227426-1
227661-1
227671-1
227673-1
227676-1
227677-1
227699-1
227699-2
227699-3
227716-3
227726-1
227726-2
227726-3
227755-1
227755-2
227755-3
Part No.
227764-2
227818-1
227820-1
227839-1
228217-1
228226-1
228226-3
228435-1
228596-1
228596-2
228596-3
228596-4
228596-5
228618-1
228618-2
228618-3
228618-4
228618-5
228686-1
228979-5
228979-6
228979-7
228980-5
228980-6
228980-7
307581-1
311386-1
311386-2
311386-3
311392-1
311395-1
311396-1
312067-1
312253-1
312253-2
312317-1
2-329444-1
2-329444-2
2-329445-1
2-329446-1
2-329452-2
2-329456-1
2-329458-1
329517
13126-1
Exempt
5222092-1
5225669-2
5227764-2
13127-1
Exempt
Exempt
5222092-3
5222093-1
5222117-1
5222132-1
5222165-2
5222420-1
5222462-1
5222506-1
5222506-5
5222506-6
5225089-4
5225092-8
5225349-9
5225361-2
5225361-4
1-5225661-2
5225363-1
5225392-2
5225395-1
5225395-2
5225395-3
5225395-6
5225395-7
5225395-8
1-5225395-0
2-5225395-0
4-5225395-1
4-5225395-2
5225396-1
5225396-2
5225396-7
5225397-1
5225397-2
5225397-7
5225398-1
5225398-3
5225398-6
5225398-7
5225398-8
1-5225398-5
5225554-6
1-5225554-1
5225555-2
5225555-6
5225555-7
5225555-8
5225557-6
5225559-2
5225559-8
5225661-1
5225661-2
1-5225661-3
1-5225661-6
5225662-2
1-5225662-8
5225664-1
5225664-2
1-5225664-2
1-5225667-6
5225669-1
5225699-1
5225886-1
5225886-4
5225886-5
5225886-7
5225974-1
5225974-2
5225974-5
5226978-1
5226978-3
5226990-1
5226990-3
5226990-6
5226993-1
5226993-2
5226993-3
5226993-6
5227079-5
5227079-6
5227079-7
1-5227079-1
1-5227079-6
1-5227079-9
2-5227079-2
4-5227079-3
5-5227079-3
6-5227079-1
6-5227079-7
6-5227079-8
8-5227079-2
1-5227086-0
5227161-1
5227161-2
5227161-3
5227161-6
5227161-7
5227161-9
5227169-5
5227169-7
5227169-8
5227222-1
5227222-2
5227222-3
5227222-6
5227426-1
5227661-1
5227671-1
5227673-1
5227676-1
5227677-1
5227699-1
5227699-2
5227699-3
5227716-3
5227726-1
5227726-2
5227726-3
5227755-1
5227755-2
5227755-3
5227818-1
5227820-1
5227839-1
5228217-1
5228226-1
5228226-3
5228435-1
5228596-1
5228596-2
5228596-3
5228596-4
5228596-5
5228618-1
5228618-2
5228618-3
5228618-4
5228618-5
5228686-1
5228979-5
5228979-6
5228979-7
5228980-5
5228980-6
5228980-7
Exempt
59980-1
69477-1
Exempt
69710-1
Exempt
148385-1
148386-1
189721-1
220015-1
220220-2
220221-2
220222-2
220224-1
221111-1
221123-2
221128-1
1-221128-0
1-221128-1
1-221128-7
2-221128-1
2-221128-3
2-221128-7
3-221128-1
221162-1
221185-1
221185-2
221185-3
221185-5
221185-7
221185-8
221185-9
1-221185-0
1-221185-8
2-221185-9
3-221185-1
221198-1
221199-1
221199-2
221199-5
221221-1
221221-2
221221-5
221221-7
221244-1
221325-1
221336-3
221336-4
221402-2
221402-4
221506-2
221506-3
221506-5
221629-1
221629-2
221629-4
221629-5
221629-6
1-221629-6
221980-1
221981-2
222006-1
5148385-1
5148386-1
Exempt
Exempt
Exempt
Exempt
Exempt
Exempt
5221111-1
5221123-2
5221128-1
1-5221128-0
1-5221128-1
1-5221128-7
2-5221128-1
2-5221128-3
2-5221128-7
3-5221128-1
5221162-1
5221185-1
5221185-2
5221185-3
5221185-5
5221185-7
5221185-8
5221185-9
1-5221185-0
1-5221185-8
2-5221185-9
3-5221185-1
5221198-1
5221199-1
5221199-2
5221199-5
5221221-1
5221221-2
5221221-5
5221221-7
5221244-1
5221325-1
5221336-3
5221336-4
5221402-2
5221402-4
5221506-2
5221506-3
5221506-5
5221629-1
5221629-2
5221629-4
5221629-5
5221629-6
1-5221629-6
5221980-1
5221981-2
5222006-1
Exempt
Exempt
Exempt
Exempt
Exempt
Exempt
Exempt
Exempt
Exempt
Exempt
2-5329444-1
2-5329444-2
2-5329445-1
2-5329446-1
2-5329452-2
2-5329456-1
2-5329458-1
5329517
2-330061-1
2-330062-1
2-330063-1
2-330358-2
330876
2-5330061-1
2-5330062-1
2-5330063-1
2-5330358-2
5330876
330878
5330878
331175
5331175
331178
5331178
331182
5331182
331238
5331238
332215
5332215
332225-3
332225-5
332225-6
332225
5332225-3
5332225-5
5332225-6
5332225
332342
5332342
413194-1
5413194-1
310
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Non-RoHS to RoHS Compliant Part Number Cross Reference (Continued)
Non-RoHS RoHS Compliant
Part No.
Non-RoHS RoHS Compliant
Part No.
Non-RoHS RoHS Compliant
Part No.
Non-RoHS RoHS Compliant
Part No.
Part No.
413194-2
413311-1
413364-2
413366-2
413476-2
413506-1
413515-2
413515-3
413515-7
413515-8
413515-9
413524-2
413524-5
413557-1
413557-2
413558-1
413558-2
413558-3
413558-5
413588-2
413588-4
413588-8
413588-9
1-413588-0
413589-1
413589-2
413589-3
413589-5
413589-7
413589-8
413589-9
1-413589-0
1-413589-1
1-413589-6
413590-3
413590-4
413590-8
413591-1
413592-2
413592-6
413592-9
1-413592-1
413631-1
413631-2
413631-3
413760-1
413760-3
413760-8
413760-9
413771-1
413771-3
413779-3
2-413779-4
413879-1
413879-2
413933-1
413959-1
413959-3
413959-4
413959-5
413959-6
Part No.
413969-2
413986-1
414088-1
414094-2
414105-1
414160-5
414168-1
414168-3
414168-4
414168-5
414168-6
414170-1
414170-2
414171-3
414173-3
414194-1
414215-1
414217-1
414265-3
414284-2
414305-1
414337-1
414338-1
414352-1
414363-3
414363-4
414363-5
414363-8
414367-2
414373-1
414394-1
414409-1
414414-1
414459-1
414460-1
414493-4
414553-1
414651-3
414666-1
414758-1
414758-2
414758-3
414907-1
414946-2
414946-3
414946-5
414946-6
415006-1
415006-2
415020-1
415024-1
415024-3
415025-1
415025-2
415046-1
415085-1
415103-1
415103-2
415105-1
415105-2
415187-1
Part No.
415189-1
415205-1
415214-1
415216-1
415218-5
415226-1
415232-4
415232-7
415242-2
415242-6
415248-1
415248-7
415252-1
415252-2
415252-3
415252-4
415255-1
415255-2
415255-3
415255-4
415276-2
415302-1
415302-2
415322-2
415332-1
415379-1
415381-1
415406-2
415417-1
415419-1
415485-1
415485-2
415485-3
415487-1
415487-2
415487-3
415520-1
415569-2
415632-1
415632-2
415633-1
415634-1
415634-2
415683-1
415712-1
415779-1
415832-1
447648-3
448103-2
603995-1
603995-2
603995-3
603995-5
603995-6
856402-1
887000-1
887046-1
887078-1
887089-1
1055439-1
1055440-1
Part No.
1055441-1
1055442-1
1055443-1
1055444-1
1055445-1
1055446-1
1055447-1
1055448-1
1055449-1
1055450-1
1055451-1
1055454-1
1055474-1
1055475-1
1055476-1
1055477-1
1055500-1
1055831-1
1055832-1
1055833-1
1055834-1
1055836-1
1055837-1
1055838-1
1055839-1
1055840-1
1055841-1
1055842-1
1055843-1
1057088-1
1057094-1
1057116-1
1057159-1
1057165-1
1057176-1
1059632-1
1059665-1
1061002-1
1061035-1
1061092-1
1061094-1
1213890-1
1274020-1
1274032-1
1274045-1
1274072-1
1274084-1
1274086-1
1274096-1
1274124-2
1274127-1
1274220-1
1274291-1
1274291-2
1274314-1
1274315-1
1274359-1
1274360-1
1274425-2
1274431-1
1274532-1
5413194-2
5413969-2
5415189-1
Exempt
5414311-1
5413364-2
5413366-2
5413476-2
5413506-1
5413515-2
5413515-3
5413515-7
5413515-8
5413515-9
5413524-2
5413524-5
5413557-1
5413557-2
5413558-1
5413558-2
5413558-3
5413558-5
5413588-2
5413588-4
5413588-8
5413588-9
1-5413588-0
5413589-1
5413589-2
5413589-3
5413589-5
5413589-7
5413589-8
5413589-9
1-5413589-0
1-5413589-1
1-5413589-6
5413590-3
5413590-4
5413590-8
5413591-1
5413592-2
5413592-6
5413592-9
1-5413592-1
5413631-1
5413631-2
5413631-3
5413760-1
5413760-3
5413760-8
5413760-9
5413771-1
5413771-3
5413779-3
2-5413779-4
5413879-1
5413879-2
5413933-1
5413959-1
5413959-3
5413959-4
5413959-5
5413959-6
5413986-1
5414088-1
5414094-2
5414105-1
5414160-5
5414168-1
5414168-3
5414168-4
5414168-5
5414168-6
5414170-1
5414170-2
5414171-3
5414173-3
5414194-1
5414215-1
5414217-1
5414265-3
5414284-2
5414305-1
5414337-1
5414338-1
5414352-1
5414363-3
5414363-4
5414363-5
5414363-8
5414367-2
5414373-1
5414394-1
5414409-1
5414414-1
5414459-1
5414460-1
5414493-4
5414553-1
5414651-3
5414666-1
5414758-1
5414758-2
5414758-3
5414907-1
5414946-2
5414946-3
5414946-5
5414946-6
5415006-1
5415006-2
5415020-1
5415024-1
5415024-3
5415025-1
5415025-2
5415046-1
5415085-1
5415103-1
5415103-2
5415105-1
5415105-2
5415187-1
5415205-1
5415214-1
5415216-1
5415218-5
5415226-1
5415232-4
5415232-7
5415242-2
5415242-6
5415248-1
5415248-7
5415252-1
5415252-2
5415252-3
5415252-4
5415255-1
5415255-2
5415255-3
5415255-4
5415276-2
5415302-1
5415302-2
5415322-2
5415332-1
5415379-1
5415381-1
5415406-2
5415417-1
5415419-1
5415485-1
5415485-2
5415485-3
5415487-1
5415487-2
5415487-3
5415520-1
5415569-2
5415632-1
5415632-2
5415633-1
5415634-2
5415634-2
5415683-1
5415712-1
5415779-1
5415832-1
5447648-3
5448103-2
Exempt
Exempt
Exempt
Exempt
Exempt
Exempt
Exempt
Exempt
Exempt
Exempt
Exempt
Exempt
Exempt
Exempt
Exempt
Exempt
Exempt
Exempt
Exempt
Exempt
Exempt
Exempt
Exempt
Exempt
Exempt
Exempt
Exempt
Exempt
Exempt
6057088-1
6057094-1
6057116-1
6057159-1
6057165-1
6057176-1
6059632-1
6059665-1
6061002-1
6061035-1
6061092-1
6061094-1
Exempt
6274020-1
6274032-1
6274045-1
6274072-1
6274084-1
6274086-1
6274096-1
6274124-2
6274127-1
6274220-1
6274291-1
6274291-2
6274314-1
6274315-1
6274359-1
6274360-1
6274425-2
6274431-1
6274532-1
Exempt
Exempt
Exempt
Exempt
Exempt
5887000-1
5887046-1
5887078-1
5887089-1
Exempt
Exempt
311
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Non-RoHS to RoHS Compliant Part Number Cross Reference (Continued)
Non-RoHS RoHS Compliant
Non-RoHS RoHS Compliant
Non-RoHS RoHS Compliant
Non-RoHS RoHS Compliant
Part No.
1311164-1
1312079-1
1312113-1
1312121-1
1312123-1
1312124-1
1312137-1
1312138-1
1312139-1
1328873-1
1329818-1
1329819-1
1331959-1
Part No.
Part No.
1361137-1
1361138-1
1361139-1
1362765-1
1363524-1
1363525-1
1363526-1
1363527-1
1393488-3
1393488-4
1393524-1
1393524-4
1393524-5
Part No.
Part No.
Part No.
Part No.
1393696-2
1393696-7
1402314-1
1408026-1
1408027-1
1408028-1
1408030-1
1408032-1
1408033-1
1408036-1
1408037-1
1408038-1
1725637-1
Part No.
Exempt
6361137-1
1-1393524-1
2-1393524-4
2-1393524-6
2-1393524-7
1393665-1
Exempt
6-1393696-2
6-1393696-7
1402314-1
6408026-1
6408027-1
6408028-1
6408030-1
6408032-1
6408033-1
6408036-1
6408037-1
6408038-1
Exempt
6312079-1
6312113-1
6312121-1
6312123-1
6312124-1
1312137-1
6312138-1
6312139-1
6328873-1
6329818-1
1329819-1
6331959-1
1361138-1
6361139-1
6362765-1
6363524-1
6363525-1
6363526-1
6363527-1
Exempt
Exempt
Exempt
Exempt
6-1393665-1
1-1393665-4
1-1393665-5
1-1393665-6
1-1393665-7
2-1393670-1
2-1393670-2
2-1393670-3
2-1393670-4
—
—
—
—
—
—
—
—
Exempt
Exempt
Exempt
Exempt
312
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
M/A-COM to Tyco Electronics Part Number Cross Reference
M/A-COM Tyco Electronics
M/A-COM Tyco Electronics
M/A-COM Tyco Electronics
M/A-COM Tyco Electronics
Part No.
Part No.
Part No.
Part No.
Part No.
Part No.
Part No.
Part No.
127669-92
1311164-1
1402314-1
1050525-1
1050542-1
1050548-1
1050598-1
1050602-1
1050611-1
1050721-1
1050740-1
1050757-1
1050770-1
1050854-1
1050859-1
1050903-1
1050996-1
1051005-1
1051007-1
1051046-1
1051052-1
1051081-1
1051085-1
1051140-1
1051145-1
1051147-1
1051151-1
1051157-1
1051638-1
1051644-1
1051852-1
1051855-1
1051861-1
1051867-1
1051869-1
1051942-1
1052063-1
1052067-1
1052072-1
1052076-1
1052098-1
1052324-1
1052349-1
1052360-1
1052422-1
1052518-1
1052522-1
1052523-1
1052528-1
1052534-1
1052544-1
1052552-1
1052563-1
1052577-1
1052628-1
1052634-1
1052643-1
1052646-1
1052652-1
1052684-1
1052689-1
1052898-1
2052 5674 02
2054 1201 02
2054 1231 02
2054 1241 02
2056 5006 02
2058 5029 02
2062 0000 00
2064 0000 00
2080 0000 00
2081 0000 02
2081 2301 00
2082 2249 02
2082 2700 00
2082 5133 02
2084 0000 02
2086 0000 02
2087 1230 02
2088 0000 02
2098 5206 54
2098 5207 54
2098 5208 54
2098 5209 02
2098 5210 02
2098 5211 02
2098 5212 02
2098 5213 02
2098 5214 02
2098 5215 02
2098 5216 54
2098 5217 54
2098 5218 02
2098 5221 10
2098 5279 10
2098 5281 02
2098 5282 02
2098 5283 02
2098 5516 02
2204 7941 09
2207 7985 09
2231 7388 36
2318 0000 54
2367 0000 54
2367 5001 54
2367 5002 54
2380 2240 00
2381 2241 00
2382 2240 00
2382 2241 00
2399 5011 54
2399 5012 54
2598 5196 54
2598 5197 54
2598 5198 54
2598 5199 54
2598 5201 54
2598 5202 54
2598 5203 54
2598 5204 54
2598 5205 54
2598 5206 54
2598 5207 54
1052902-1
1052978-1
1052982-1
1052986-1
1053092-1
1053222-1
1053354-1
1053378-1
1053488-1
1053635-1
1053646-1
1053780-1
1053788-1
1054426-1
1054869-1
1055018-1
1055047-1
1055065-1
1055439-1
1055440-1
1055441-1
1055442-1
1055443-1
1055444-1
1055445-1
1055446-1
1055447-1
1055448-1
1055449-1
1055450-1
1055451-1
1055454-1
1055474-1
1055475-1
1055476-1
1055477-1
1055500-1
1082029-1
1088312-1
1082034-1
1085456-1
1251802-1
1083946-1
1055689-1
1055694-1
1055695-1
1055696-1
1055697-1
1086008-1
1086009-1
1055831-1
1055832-1
1055833-1
1055834-1
1055836-1
1055837-1
1055838-1
1055839-1
1055840-1
1055841-1
1055842-1
2598 5208 54
2598 5342 54
2598 5438 54
2831 7316 02
2831 7341 02
2831 7388 02
2834 7316 02
2834 7341 02
2834 7358 02
2834 7388 02
2837 7316 02
2837 7388 02
2902 7947 62
2902 7985 62
2908 7947 62
2908 7985 62
2965 5006 62
2980 0000 62
2980 2240 00
2981 2241 00
2982 2240 00
2982 2241 00
2998 5001 02
2998 5002 02
2998 5003 02
2998 5022 94
2998 5028 02
2998 5030 02
2998 5035 02
2998 5043 02
2998 5044 02
2998 5045 02
2998 5054 94
2998 5055 94
2998 5056 94
3001 7941 00
3001 7985 00
3002 7941 00
3004 7941 00
3004 7985 00
3006 7941 00
3051 0000 10
3051 1200 10
3051 1201 10
3052 0000 10
3052 1201 10
3080 2240 00
3080 2242 00
3081 2241 00
3082 0000 00
3082 2240 00
3082 2241 00
3082 2243 00
3082 2310 00
3082 2311 00
3082 2320 00
3082 2321 00
3084 2240 00
3101 7941 00
3101 7985 00
3104 7941 00
1055843-1
1221286-1
1088313-1
1056436-1
1056438-1
1056443-1
1056445-1
1056447-1
1056450-1
1056452-1
1056456-1
1056462-1
1056526-1
1056527-1
1056553-1
1056554-1
1061692-1
1056700-1
1056702-1
1056706-1
1056707-1
1056708-1
1056721-1
1056722-1
1056724-1
1056728-1
1056729-1
1056731-1
1056736-1
1056743-1
1056744-1
1056745-1
1056750-1
1056751-1
1056752-1
6057088-1
6057094-1
6057116-1
6057159-1
6057165-1
6057176-1
1057275-1
1057277-1
1057279-1
1057284-1
1057290-1
1057341-1
1057343-1
1057367-1
1057374-1
1057377-1
1057381-1
1057385-1
1057387-1
1057388-1
1057390-1
1057392-1
1057463-1
1057631-1
1057635-1
1057676-1
3104 7985 00
3106 7941 00
3106 7985 00
3152 0000 10
3152 1201 10
3180 2242 00
3180 2302 00
3180 2320 00
3182 2240 00
3182 2243 00
3184 2240 00
3280 2224 00
3280 2240 00
3281 2223 00
3282 2223 00
3282 2240 00
3282 2241 00
3284 2240 00
3680 2240 00
3680 2242 00
3682 2241 00
3682 2242 00
3684 2240 00
4503 7685 02
4503 7941 00
4503 7985 00
4504 7641 02
4504 7941 00
4504 7985 00
4506 7641 02
4506 7685 02
4506 7941 02
4506 7985 02
4510 7941 00
4510 7985 00
4522 7941 02
4522 7985 02
4533 7388 02
4534 7341 02
4536 5014 02
4536 7341 02
4536 7388 02
4540 7388 02
4551 1201 02
4551 1352 02
4551 3357 02
4552 1201 02
4552 1352 02
4557 5009 02
4557 5119 02
4557 5329 02
4557 5368 02
4558 1154 02
4558 5009 02
4558 5119 02
4558 5329 02
4562 0000 00
4563 0000 00
4563 5004 00
4565 0000 00
4580 2240 02
1057679-1
1057697-1
1057699-1
1057775-1
1057780-1
1057841-1
1057843-1
1057845-1
1057853-1
1057857-1
1057908-1
1058056-1
1058058-1
1058066-1
1058077-1
1058081-1
1058083-1
1058117-1
1058651-1
1058653-1
1058664-1
1058666-1
1058675-1
1059399-1
1059402-1
1059404-1
1059408-1
1059410-1
1059412-1
1059451-1
1059452-1
1059453-1
1059456-1
1059465-1
1059467-1
1059505-1
1059506-1
1059523-1
1059525-1
1058572-1
1059540-1
1059541-1
1059551-1
1059563-1
1059566-1
1059572-1
1059594-1
1059596-1
1059617-1
6059632-1
1059637-1
1059651-1
1059654-1
1059657-1
6059665-1
1059671-1
1059681-1
1059684-1
1253111-1
1059691-1
1059707-1
127893-98
2001 5003 02
2001 5031 02
2001 5032 02
2001 5385 02
2001 5395 02
2001 5443 02
2001 7188 02
2001 7641 02
2001 7941 02
2001 7985 02
2002 5015 00
2002 5016 00
2002 7188 02
2004 7188 02
2004 7641 02
2004 7685 02
2006 5010 00
2006 5013 00
2006 7941 00
2006 7985 00
2007 7188 02
2007 7641 02
2007 7685 02
2007 7941 02
2007 7985 02
2031 5002 00
2031 5003 02
2032 5002 00
2032 5003 02
2032 5007 00
2032 5021 02
2032 5026 02
2034 5008 00
2037 5005 02
2037 5006 02
2037 5007 02
2037 5008 02
2037 5100 02
2051 0000 02
2051 1352 02
2051 1618 02
2052 0000 02
2052 1200 02
2052 1201 00
2052 1201 02
2052 1215 02
2052 1300 02
2052 1350 02
2052 1352 02
2052 1612 02
2052 1658 02
2052 3354 02
2052 3356 02
2052 3358 02
2052 3359 02
2052 3363 02
2052 3500 02
2052 3502 02
2052 5636 02
313
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
M/A-COM to Tyco Electronics Part Number Cross Reference (Continued)
M/A-COM Tyco Electronics
M/A-COM Tyco Electronics
M/A-COM Tyco Electronics
M/A-COM Tyco Electronics
Part No.
Part No.
Part No.
Part No.
Part No.
Part No.
Part No.
Part No.
4581 2241 02
4581 2700 00
4582 2240 02
4582 2241 02
4582 2700 00
4583 2240 02
4584 2240 02
4584 2242 02
4584 2244 02
4585 2240 02
4585 2241 02
4703 7985 00
4706 7985 02
4710 7985 00
4733 7316 02
4733 7388 02
4736 5001 02
4736 7316 02
4740 7388 00
4751 3355 02
4757 1154 02
4757 3204 00
4757 5006 02
4757 5014 00
4763 0000 00
5001 5015 09
5007 5008 09
5031 5007 09
5031 5014 09
5062 5003 09
5064 5003 09
5134 5016 10
5180 2240 00
5181 2241 00
5182 2240 00
5182 2241 00
5801 7947 09
5801 7985 09
5802 7947 09
5802 7985 09
5807 7985 09
5818 5002 09
5818 5002 10
5818 5003 10
5831 5002 10
5831 5003 09
5831 5003 10
5831 7316 09
5831 7316 10
5834 7388 10
1059711-1
1059713-1
1059716-1
1059718-1
1059720-1
1059724-1
1059729-1
1059731-1
1059733-1
1059756-1
1059758-1
1059857-1
1059868-1
1059874-1
1059884-1
1059886-1
1059887-1
1059888-1
1059889-1
1059894-1
1059901-1
1059902-1
1059903-1
1059905-1
1059919-1
1060163-1
1060183-1
1060220-1
1060221-1
1060256-1
1060259-1
1254781-1
1060487-1
1060494-1
1060498-1
1060500-1
1060772-2
1060772-1
1060774-2
1060774-1
1060787-1
1060811-2
1060811-1
1060813-1
1060869-1
1060871-1
1060872-1
1060875-2
1060875-1
1060883-1
5837 5025 10
5837 5030 10
5837 5031 09
5837 5031 10
5858 0000 09
5858 0000 10
5862 5002 09
5862 5002 10
5862 5003 09
5862 5003 10
5862 5004 09
5862 5004 10
5862 5007 13
5862 5018 13
5863 0000 09
5863 0000 10
5864 5001 09
5864 5001 10
5864 5002 09
5864 5002 10
5864 5003 09
5864 5003 10
5864 5008 13
5880 2240 00
5881 2241 00
5882 2240 00
5882 2241 00
5899 5004 54
5899 5009 54
7081 2301 00
7081 2311 00
7081 5008 00
7081 5009 00
7082 2242 00
7082 2243 00
7082 2300 00
7082 2310 00
7082 5004 00
7082 5005 00
9631 7179 10
9637 7179 10
9662 5000 10
9664 0000 10
9960 1100 24
9960 1200 24
9960 1305 24
9960 2100 24
9960 2200 24
9960 2305 24
9960 2510 24
1330723-1
1329293-1
1363301-2
1363301-1
1060959-1
1060960-1
1060984-1
1060985-1
1330126-1
1060989-1
1060995-1
1060996-1
6061002-1
1061007-1
1085221-1
1061015-1
1061022-1
1061023-1
1061026-1
1061027-1
1061029-1
1061030-1
6061035-1
1061070-1
1061071-1
1061072-1
1061073-1
6061092-1
6061094-1
1061738-1
1061739-1
1061742-1
1061744-1
1061750-1
1061751-1
1061752-1
1061753-1
1061757-1
1061758-1
1362990-1
1362991-1
1361169-1
1363106-1
1064524-1
1064530-1
1064533-1
1064535-1
1064538-1
1064540-1
1064542-1
9960 3100 24
9960 4100 01
9960 4100 02
9960 4100 04
9960 4100 07
9960 4100 08
9960 4200 01
9960 4200 02
9960 4200 04
9960 4200 07
9960 4200 08
9960 4305 01
9960 4305 02
9960 4305 04
9960 4305 07
9960 4305 08
9980 4100 01
9980 4100 02
9980 4100 04
9980 4100 05
9980 4100 07
9980 4100 08
9980 4200 01
9980 4200 02
9980 4200 04
9980 4200 05
9980 4200 07
9980 4200 08
9980 4305 01
9980 4305 02
9980 4305 04
9980 4305 05
9980 4305 07
9980 4305 08
A55P22E999X
A55P23E999X
A55X01B999X
A57R03G999X
B67A54T022X
B67A54T117X
B67A64T022X
B67A64T062X
B67A64T280X
B67A64T437X
B67A64TA25X
B67B42T022X
B67B42T437X
B67B44T022X
B67B44T062X
B67B44T437X
1082845-1
1064543-1
1064544-1
1064546-1
1064549-1
1064550-1
1064552-1
1064553-1
1064555-1
1064558-1
1064559-1
1064560-1
1064561-1
1064563-1
1064566-1
1064567-1
1329174-1
1329175-1
1408050-4
1255378-4
1408051-4
1330401-4
1329174-2
1329175-2
1408050-5
1255378-5
1408051-5
1330401-5
1310432-1
1329175-3
1408050-6
1255378-6
1408051-6
1330401-6
1311206-1
1313453-1
6312079-1
1311209-1
1311097-1
1311098-1
1311099-1
1311100-1
1311696-1
1311102-1
1313507-1
1311103-1
1311104-1
1311106-1
1311698-1
1311111-1
B67B44TA25X
B67E64T022X
B67H16T493X
B67H49T022X
B67H64T022X
B67H64T062X
B67H64T117X
B67H64T280X
B67H64T437X
B67H64TA25X
B67H66T022X
B67H66T062X
B67H66T437X
B67H74T463X
B67N08T999X
B67N12T999X
B67N25T999X
B67P34G999X
B67R53G999X
B67Z50T999X
C65E06G022X
D75A02B001X
D75A02B004X
D75B01B470X
D75B02B010X
D75B03B001X
D75B03B004X
D75B04B004X
D75B04B010X
D75B05B004X
D75G03B001R
D75G03B004R
D75G07B060R
D75G08B001R
D75G08B004R
D75G09B010R
D75G10B004R
D75R02B999X
D75X06B999X
D75X12E470X
D75X14B999X
D75X15B999X
N15X09E470X
N15X10B999X
N15X12E470X
N15X14E010X
N15X16E999X
N15X17E999X
N15X18E010X
T35E60E010X
1313508-1
1408041-1
1313511-1
1311115-1
1327083-1
1311117-1
1311700-1
1313883-1
1311118-1
1313887-1
1311120-1
1311701-1
1311122-1
1314422-1
1311125-1
1314103-1
1314102-1
1313364-1
1311127-1
6-1311703-1
1311638-1
6331959-1
6362765-1
6328873-1
6408028-1
6408030-1
6312113-1
6408027-1
6408026-1
6408038-1
6408032-1
6408033-1
6363524-1
6363525-1
6363526-1
6363527-1
6408036-1
6408037-1
6312121-1
6312123-1
6312124-1
6361137-1
1312137-1
6312138-1
6329818-1
6312139-1
1361138-1
6361139-1
1329819-1
1312569-1
314
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Part Number Index
Note: This index lists all cataloged parts
by base no. only. Complete part nos.
(with prefixes and/or suffixes) are shown
on the page(s) indicated.
Part No.
413985
413990
413996
414002
414026
414171
414396
414612
414766
414895
414946
414948
414963
414969
415001
415232
415327
415340
415377
415380
415381
415490
415500
415504
415523
415567
415672
415774
415796
619028
619041
619052
619053
619061
619062
619068
619072
619075
619076
619078
619085
619106
619107
619115
619127
619133
619134
619135
619137
619196
619201
619210
619211
619213
619214
619215
619219
619220
619223
619224
619226
619228
Page
Part No.
619229
Page
206
233
206
261
94
Part No.
1052689
1052898
1052902
1052978
1052982
1052986
1053092
1053222
1053354
1053378
1053488
1053635
1053646
1053780
1053788
1054426
1054869
1055018
1055047
1055065
1055689
1055694
1055695
1055696
1055697
1056436
1056438
1056443
1056445
1056447
1056450
1056452
1056456
1056462
1056526
1056527
1056553
1056554
1056700
1056702
1056706
1056707
1056708
1056721
1056722
1056724
1056728
1056729
1056731
1056736
1056743
1056744
1056745
1056750
1056751
1056752
1057275
1057277
1057279
1057284
1057290
1057341
Page
120
178
180
181
178
181
35
619231
118
619238
119
Part No.
50084
Page
246
246
246
246
247, 248
248
21
619271
117
887098
117
50095
1050525
1050542
1050548
1050598
1050602
1050611
1050721
1050740
1050757
1050770
1050854
1050859
1050903
1050996
1051005
1051007
1051046
1051052
1051081
1051085
1051140
1051145
1051147
1051151
1051157
1051638
1051644
1051852
1051855
1051861
1051867
1051869
1051942
1052063
1052067
1052072
1052076
1052098
1052324
1052349
1052360
1052422
1052518
1052522
1052523
1052528
1052534
1052544
1052552
1052563
1052577
1052628
1052634
1052643
1052646
1052652
1052684
110
110
110
112
112
112
105
112
110
110
110
110
105
106
113
113
111
111
111
111
106
113
113
112
112
104
104
104
107
104
107
107
104
105
105
108
108
108
114
116
118
114
116
116
116
119
114
114
116
118
119
120
120
120
120
120
120
117
50105
43
115
50107
180
94
117
51563
121
51565
182
178
179
181
182
182
21
121
51692
122
51751
194
245
245
245
245
245
245
58, 72, 73
41
122
201097
201098
201143
201144
201145
201146
221108
221500
221509
221539
221540
221543
221551
221586
221789
221790
221951
221988
222163
222428
225014
225088
225093
225094
225348
225389
225551
225668
225886
226023
226060
226537
227223
227945
228179
228215
228216
228502
228553
228658
282938
329631
256
123
259
123
99
123
181
185
181
181
185
184
185
99
122
123
122
42
214
94
217, 255
217, 253
217, 258
217, 259
106
94
63
64
63
76
121
121
55, 56
63
181
180
64
106
106
107
230, 235
230
235
236
230, 231
230, 231
235
230, 231
233
235
230, 235
131
136
133
115
204
232
204
204
235
234
233
236
234
234
236
127
261
136
131
131
135
135
107
61, 74
52
107
107
22
108
248
22
108
154
23
154
38
154
22
154
35
152, 154
255
23
49
253
247
247
248
55, 56
25
258
259
152, 155
155
155
33
156
182
182
37
155
155
155
179
23
155
155
97
155
57, 58, 59
73, 91
156
156
329632
57, 58, 59,
73, 91
156
330022
330024
330620
332056
332057
413453
65
64
24
24
54
24
248
248
65
24
24
254
315
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Part Number Index (Continued)
Part No.
1057343
1057367
1057374
1057377
1057381
1057385
1057387
1057388
1057390
1057392
1057463
1057631
1057635
1057676
1057679
1057697
1057699
1057775
1057780
1057841
1057843
1057845
1057853
1057857
1057908
1058056
1058058
1058066
1058077
1058081
1058083
1058117
1058572
1058651
1058653
1058664
1058666
1058675
1059399
1059402
1059404
1059408
1059410
1059412
1059451
1059452
1059453
1059456
1059465
1059467
1059505
1059506
1059523
1059525
1059540
1059541
1059551
1059563
1059566
1059572
1059594
1059596
Page
254
253
25
Part No.
1059617
1059637
1059651
1059654
1059657
1059671
1059681
1059684
1059691
1059707
1059711
1059713
1059716
1059718
1059720
1059724
1059729
1059731
1059733
1059756
1059758
1059857
1059868
1059874
1059884
1059886
1059887
1059888
1059889
1059894
1059901
1059902
1059903
1059905
1059919
1060163
1060183
1060220
1060221
1060256
1060259
1060487
1060494
1060498
1060500
1060772
1060774
1060787
1060811
1060813
1060869
1060871
1060872
1060875
1060883
1060959
1060960
1060984
1060985
1060989
1060995
1060996
Page
165
167
165
165
165
168
166
166
166
255
253
256
259
257
257
255
255
255
255
259
257
171
171
171
172
172
172
172
172
175
173
175
173
175
174
194
195
194
194
195
195
255
253
258
258
199
199
200
198
198
198
198
198
198
199
201
201
200
200
200
200
200
Part No.
1061007
1061015
1061022
1061023
1061026
1061027
1061029
1061030
1061070
1061071
1061072
1061073
1061692
1061738
1061739
1061742
1061744
1061750
1061751
1061752
1061753
1061757
1061758
1064524
1064530
1064533
1064535
1064538
1064540
1064542
1064543
1064544
1064546
1064549
1064550
1064552
1064553
1064555
1064558
1064559
1064560
1064561
1064563
1064566
1064567
1082029
1082034
1082845
1083946
1085221
1085456
1086008
1086009
1088312
1088313
1221286
1251802
1253111
1255378
1274007
1274191
1274192
Page
201
200
201
201
201
201
201
201
254
253
258
256
156
256
256
256
256
259
256
257
258
256
258
214
214
214
215
215
215
215
216
216
216
217
217
216
216
216
217
217
216
216
216
217
217
111
106
215
214
200
209
209
209
112
209
217
214
166
211
77
Part No.
1274330
1274449
1274513
1274520
1274544
1274563
1274566
1274568
1274571
1274572
1274584
1274594
1274662
1274663
1274668
1274684
1274688
1274689
1274694
1274714
1274734
1274735
1274794
1274795
1274804
1274805
1274806
1274807
1274808
1274935
1310432
1311097
1311098
1311099
1311100
1311101
1311102
1311103
1311104
1311106
1311111
1311115
1311117
1311118
1311120
1311122
1311125
1311127
1311206
1311209
1311638
1311696
1311698
1311700
1311701
1311703
1312137
1312569
1313364
1313453
1313507
1313508
Page
181
133
145
133
134
80
258
257
257
258
257
257
257
254
33
80
80
81
81
81
133
28
33
37
81
37
57
38
81
38
27
41
27
41
109
137
27
254
254
254
258
258
255
254
254
253
257
258
257
254
163
255
255
257
259
255
162
158, 160
158, 160
162
158, 160
158, 160
162
162
160
160
161
161
161
161
163
163
163
163
163
164
164
168
164
164
27
237
237
27
27
27
28
28
76
210
187
187
187
187
187
187
188
188
188
188
189
190
190
189
189
190
191
254
254
194
187
188
190
189
191
18
35
191
253
187
188
239
239
316
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Part Number Index (Continued)
Part No.
1313511
1313883
1313887
1314102
1314103
1314422
1327083
1329174
1329175
1329293
1329819
1330126
1330401
1330723
1361138
1361169
1362990
1362991
1363106
1363301
1392019
1392020
1393562
1393662
1393665
Page
189
190
190
190
190
190
190
210
210
198
18
Part No.
1408347
1408348
1408349
1408393
1408496
1408541
1442004
1460010
1460052
1460055
1460060
1460118
1460128
1460132
1460139
1460159
1460169
1460468
1460469
1460470
1460802
1460803
1460815
1460817
1460821
1460823
1484546
1566230
1658260
1750107
1750108
1750109
1750110
1775146
1775227
1775228
1775229
1775230
5148385
5148386
5221111
5221123
5221128
5221162
5221185
5221198
5221199
5221221
5221244
5221325
5221336
5221402
5221506
5221629
5221980
5221981
5222006
5222092
5222093
5222117
5222132
5222165
Page
125
125
125
128, 253
220
109
206
131
10
Part No.
5222420
5222462
5222506
5225089
5225092
5225349
5225361
5225363
5225392
5225395
5225396
5225397
5225398
5225554
5225555
5225557
5225559
5225661
5225662
5225664
5225667
5225669
5225699
5225886
5225974
5226978
5226990
5226993
5227079
5227086
5227161
5227169
5227222
5227426
5227661
5227671
5227673
5227676
5227677
5227699
5227715
5227716
5227726
5227754
5227755
5227764
5227818
5227820
5227839
5228217
5228226
5228435
5228596
5228618
5228686
5228979
5228980
5329444
5329445
5329446
5329452
5329456
Page
60
Part No.
5329458
5329517
5330061
5330062
5330063
5330358
5330876
5330878
5331175
5331178
5331182
5331238
5332215
5332225
5332342
5413194
5413364
5413366
5413476
5413506
5413515
5413524
5413557
5413558
5413588
5413589
5413590
5413591
5413592
5413631
5413760
5413771
5413779
5413879
5413933
5413959
5413969
5413986
5414088
5414094
5414105
5414160
5414168
5414170
5414171
5414173
5414194
5414215
5414217
5414265
5414284
5414305
5414311
5414337
5414338
5414352
5414363
5414367
5414373
5414394
5414409
5414414
Page
53
74
64
32
47
24
51
21
53
34
48
21
47
23
49
21
50
25
47, 48, 49
51
50
134
25
50
200
211
198
18
52
36
144
141
134
9
53, 54
34
92
90
32
90
203
203
203
203
198
240
240
137, 147
241
36
72
144
115
115
195
261
261
135
135
147, 148
146
174
224
204
225
225
225
226
224
227, 260
227, 260
227, 259
227, 259
239
239
180
60
34
65
21
63
21
85
22
43
23
85
22
85
21
65
49
75
148, 149, 150,
253, 256, 259
50
68
59
66, 67
67, 70
42
1393668
240
57
1393670 131, 132, 133, 134,
135, 136, 147, 253,
256, 259, 260
58
47, 48, 49
21
63
62
1393672
141, 142, 143
57
69
1393680 140, 142, 143, 144
55
53, 54
51
1393681
1393682
140, 141, 143,
145, 146, 150
58
140, 141, 142,
143, 144
56
57
57
40
1393696
1393757
1402314
1407578
1408041
1408050
1408051
1408120
1408148
1408149
1408150
1408151
1408152
1408312
1408313
1408314
1408332
1408333
1408336
1408337
1408338
1408339
1408340
1408341
1408342
1408343
1408346
250
142, 145, 220
15
58
50
58
60
57
74
208
57
74
188
60
85
211
55
64
211
55
21
221
47, 48, 49, 55
243
66
56
36
219
55
179
35
219
55
220
91
40
34
220
69
39
56
221
70
39
85
219
71
39
71
219
41
179
64
50
219
75
85
127
68
181
242
242
91
60
126
42
63
126
65
181
181
85
127
242
242
61
126
51
126
53, 54
48
178
88
128
72
128
72
49
62
128
76
47
74
128, 260
125
73
51
72
64
54
64
317
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
Part Number Index (Continued)
Part No.
5414459
5414460
5414493
5414553
5414651
5414666
5414758
5414907
5414946
5415006
5415020
5415024
5415025
5415046
5415085
5415103
5415105
5415187
5415189
5415205
5415214
5415216
5415218
5415226
5415232
5415242
5415248
5415252
Page
72
60
87
87
86
64
87
72
178
179
76
96
62
57
86
85
72
71
60
86
96
86
57
94
21
22
23
24
Part No.
5415255
5415276
5415302
5415322
5415332
5415379
5415406
5415417
5415419
5415484
5415487
5415520
5415569
5415632
5415633
5415634
5415683
5415712
5415779
5415832
5447648
5448103
5887000
5887046
5887078
5887089
6057088
6057094
Page
22
Part No.
6057116
6057159
6057165
6057176
6059632
6059665
6061002
6061035
6061092
6061094
6274020
6274032
6274045
6274072
6274084
6274086
6274096
6274124
6274127
6274291
6274314
6274315
6274359
6274360
6274425
6274431
6274532
6311225
Page
22
Part No.
6312079
6312113
6312121
6312123
6312124
6312138
6312139
6328873
6329818
6331959
6361137
6361139
6362765
6363524
6363525
6363526
6363527
6408026
6408027
6408028
6408030
6408032
6408033
6408036
6408037
6408038
6408399
Page
14
9
96
23
95
23
15
19
19
15
19
10
17
9
97
23
98
167
167
202
202
202
202
97
181
98
72
72
184
184
73
17
19
9
98
95
98
73
72
11
11
11
11
10
10
9
72
72
72
71
98
121
75
95
87
75
92
74
107
107
98
61
9
61
10
10
11
11
10
18
74
97
74
95
76
97
133
21
21
21
10
Tooling Part Number Index
Part No.
13126
Page
268
Part No.
311395
Page
268
Part No.
1055454
1055469
1055474
1055475
1055476
1055477
1055500
1055831
1055832
1055833
1055834
1055835
1055836
1055837
1055838
1055839
1055840
1055841
1055842
1055843
1213890
1311164
Page
263
262
262
262
262
262
263
263
263
263
263
263
263
263
263
263
263
263
263
263
266
191
Part No.
Page
265
1393488
13127
268
311396
268
1393494
265
21027
268
312067
268
1393524
264 , 265
266
58318
268
312253
268
1725837
58433
266
312317
268
1775231
227
58483
192
354500
267
M22520/36-01
M22520/36-02
M22520/36-03
M22520/36-04
M22520/36-05
M22520/36-06
M22520/36-07
M22520/36-08
M22520/36-09
M22520/36-10
M22520/36-11
M22520/36-12
M22520/36-13
MIL-C-22520/2-01
MIL-C-22520/5-01
268
58489
192
603995
267
268
59980
267, 268
268
856402
266
268
59981
1055420
1055439
1055440
1055441
1055442
1055443
1055444
1055445
1055446
1055447
1055448
1055449
1055450
1055451
263
268
69477
266
262, 263
262, 263
262, 263
263
268
69710
266
268
189721
220015
220220
220221
220222
220224
220241
307581
308075
311386
311392
266
268
266
268
268
263
268
268
263
268
268
263
268
268
263
268
268
263
268
268
263
192
268
263
192
268
263
268
263
318
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
Global Contacts
Americas
Argentina – Buenos Aires
Phone:
Fax:
+54-11-4733-2200
+54-11-4733-2211
Brasil – São Paulo
(Technical Support)
Phone:
Fax:
+55-11-3611-1311
+55-11-3611-0397
Phone:
Fax:
+905-470-4425
+905-474-5525
United States – Harrisburg, PA
Phone:
Fax:
+717-564-0100
+717-986-7575
Product Information Center:
(Technical Support)
Phone:
Fax:
+800-522-6752
+717-986-7575
Asia/Pacific
Australia – Sydney
Japan – Toyko
New Zealand – Auckland
Singapore – Singapore
Phone:
Fax:
+61-2-9554-2600
+61-2-9502-2556
Phone:
Fax:
+81-44-844-8111
+81-44-812-3207
Phone:
Fax:
+64-9-634-4580
+64-9-634-4586
Phone:
Fax:
+65-6482-0311
+65-6482-1012
Product Information Center:
Product Information Center:
(Technical Support)
(Technical Support)
Philippines – Makati City
Thailand – Bangkok
Phone:
Fax:
+61-2-9840-8200
+61-2-9634-6188
Phone:
Fax:
+81-44-844-8013
+81-44-812-3200
Phone:
Fax:
+632-848-0171
+632-867-8661
Phone:
Fax:
+66-2-955-0500
+66-2-955-0505
India – Bangalore
Korea – Seoul
People’s Republic of China
Vietnam and Indochina –
Ho Chi Minh City
Phone:
Fax:
+91-80-285-40800
+91-80-285-40820
Phone:
Fax:
+82-2-3415-4500
+82-2-3486-3810
Hong Kong
Phone:
Fax:
+852-2735-1628
+852-2735-0243
Phone:
Fax:
+84-8 930-5546
+84-8 930-3443
Shanghai
Phone:
Fax:
+86-21-2407-1588
+86-21-2407-1599
Taiwan – Taipei
Phone:
Fax:
+886-2-8768-2788
+886-2-8768-2268
Europe/Middle East/Africa
Product Information Center:
(Technical Support):
Netherlands – ’s-Hertogenbosch
Belgium – Kessel-Lo
Phone:
Fax:
+31-73-624-62-46
+31-73-621-23-65
Phone:
Fax:
+34-93-291-0330
+34-93-200-3779
Phone:
Fax:
+32-16-35-23-00
+32-16-35-23-52
Product Information Center:
(Technical Support)
Germany – Langen
Sweden – Upplands Väsby
Bulgaria – Sofia
Phone:
Fax:
+31-73-6246-999
+31-73-6246-998
Phone:
Fax:
+49-6103-709-0
+49-6103-709-1223
Phone:
Fax:
+46-8-50-72-50-00
+46-8-50-72-50-01
Phone:
Fax:
+359-2-971-2152
+359-2-971-2153
Norway – Nesbru
Phone:
Fax:
+47-66-77-8886
+47-66-77-8855
Czech Republic – Kurim
Phone:
Fax:
+420-5-41-162-111
+420-5-41-162-223
Poland – Warsaw
Phone:
Fax:
+48-22-45-76-700
+48-22-45-76-720
Germany - HTS Division – Neunkirchen
Phone:
Fax:
+49-2247-305-0
+49-2247-305-122
Romania – Bucharest
Phone:
Fax:
+40-21-311-3479/3596
+40-21-312-0574
Russia – Moscow
Phone:
Fax:
+7-495-926-5506/07/08/09
+7-495-926-5505
Russia – St. Petersburg
Phone:
Fax:
+7-812-718-8192
+7-812-718-8193
Slovenia – Ljubljana
Phone:
Fax:
+386-1561-3270
+386-1561-3240
South Africa – Port Elizabeth
Phone:
Fax:
+2741-503-4500
+2741-581-0440
1307191–3M–LUG–FP–3-07
Printed in the U.S.A.
Tyco Electronics Corporation
www.tycoelectronics.com
Tyco Electronics Corporation
Harrisburg, Pennsylvania
1307191 Revised 3-07 3M-LUG-FP
tycoelectronics.com
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明