31096 [MACOM]
SOLISTRAND, Budget and DIAMOND GRIP; SOLISTRAND ,预算和DIAMOND GRIP型号: | 31096 |
厂家: | Tyco Electronics |
描述: | SOLISTRAND, Budget and DIAMOND GRIP |
文件: | 总60页 (文件大小:662K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Product Facts
■ SOLISTRAND
Terminals and Splices
■ Utilize a brazed seam
■ Applied with “W” crimp
tooling
■ Available in wire sizes
26 AWG– 600 MCM
[0.1–304 mm2]
■ For terminating solid
& stranded wires
■ U.L. Listed
CSA Certified
Military Approved
■ Budget
Terminals and Splices
■ Utilize a butted seam
■ Applied with “F” crimp
tooling
■ Availble in wire
sizes 26– 10 AWG
[0.1–6.64 mm2]
■ For terminating stranded
wire only
■ U.L. Listed
■ DIAMOND GRIP
Terminals and Splices
■ Utilize a butted seam
Need more information?
SOLISTRAND and Budget
terminals and splices are
specially designed to termi-
nate solid and stranded
wire, irregular shaped con-
ductors, and combinations
of these— retaining the
superior performance char-
acteristics of single-purpose
terminals and splices.
terminals and splices fulfill
the need for an economical
and electrically superior ter-
mination where extreme
vibration and tension on the
wires are not present.
■ Metal insulation support
sleeve with “V” notches
Call the AMP Technical
Support Center:
1-800-522-6752
■ Applied with a “C” crimp
The Technical Support
Center is staffed with spe-
cialists well versed in all
AMP Products. The Center
can provide you with:
■ Available in wire sizes
26-10 AWG (0.1-6.64 mm2)
DIAMOND GRIP utilizes a
tin plated copper insulation
support sleeve with “V”
notches. The sleeve elimi-
nates fraying of the insula-
tion or breaking of the con-
ductor. The “V” notches
lock the wire insulation
■ For terminating stranded
wire only
■ U.L. Listed
CSA Certified
■
Technical Support
Corrosion resistance, vibra-
tion resistance and tensile
strength of these terminals
and splices are well within
the limits of commercial and against vibration and
military specifications.
■
Catalogs
■
Technical Documents
■
Product Samples
■
AMP Authorized
Distributor Locations
pullout.
The Budget terminal is
primarily the same as the
SOLISTRAND terminals
without the brazed seam
in the wire barrel. These
© Copyright 1994, 1996 and 2000 by
AMP Incorporated, Harrisburg, PA.
All Rights Reserved.
AMP, AMPOMATOR, AMP-O-LECTRIC,
AMP-TAPETRONIC, CERTI-CRIMP,
DIAMOND GRIP, PRO-CRIMPER II,
SOLISTRAND, TAPETRONIC and
DYNA-CRIMP are trademarks.
1
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Table of Contents
How to Compute Circular
Mil Area of Various Wire Shapes ............................................................................................3
Table of SOLISTRAND and Budget Standard Wire Ranges ..................................................3
Table listing: Circular Mil Area for common wire sizes......................................................4– 7
Product Descriptions ....................................................................................................8, 9, 10
Stud Hole Sizes ....................................................................................................................11
SOLISTRAND and Budget
Ring Tongue Terminals...........................................................................................12– 20
26 AWG – 600 MCM [0.1– 304 mm2]
Right Angle Ring Tongue Terminals............................................................................21
22 AWG – 300 MCM [0.26–152 mm2]
Heavy Duty Ring Tongue Terminals ......................................................................22, 23
16– 1/0 AWG [1.04– 60.6 mm2]
Rectangular Tongue Terminals ..............................................................................24, 25
22– 10 AWG [0.26– 6.64 mm2]
Spade Tongue Terminals ..............................................................................................26
26– 10 AWG [0.1– 6.64 mm2]
Short Spring Spade Tongue Terminals ................................................................27, 28
26– 10 AWG [0.1– 6.64 mm2]
Long Spring Spade Tongue Terminals .......................................................................29
26– 10 AWG [0.1– 6.64 mm2]
Flanged Spade Tongue Terminals ..............................................................................30
26– 10 AWG [0.1– 6.64 mm2]
Slotted Ring Tongue Terminals ...................................................................................31
26– 10 AWG [0.1– 6.64 mm2]
Hook Tongue Terminals................................................................................................32
22– 10 AWG [0.26– 6.64 mm2]
Tab Tongue Terminals...................................................................................................32
22– 8 AWG [0.26– 10.5 mm2]
Flag Ring Tongue Terminals...................................................................................33, 34
16– 4/0 AWG [1.04– 117 mm2]
Parallel Splices...............................................................................................................35
22 AWG–600 MCM [0.26– 304 mm2]
Butt Splices ..............................................................................................................36, 37
26 AWG – 600 MCM [0.1 – 304 mm2]
DIAMOND GRIP
Ring Tongue Terminals...........................................................................................38, 39
26– 10 AWG [0.1– 6.64 mm2]
Knife Disconnect Splices..............................................................................................40
22– 10 AWG [0.26– 6.64 mm2]
Slotted Ring Tongue......................................................................................................40
26– 16 AWG [0.1– 1.65 mm2]
Rectangular Tongue Terminals ....................................................................................41
22– 16 AWG [0.26– 1.65 mm2]
Flanged Spade Tongue Terminals ..............................................................................41
26– 14 AWG [0.1– 2.62 mm2]
Spade Tongue Terminals .............................................................................................42
26– 16 AWG [0.1– 1.65 mm2]
Standard “B”
Knife Disconnect Splices..............................................................................................43
22– 8 AWG [0.26– 10.5 mm2]
Rectangular Tongue Terminals ....................................................................................43
22– 14 AWG [0.26– 2.62 mm2]
Military Approvals, Part Numbers & Requirements ......................................................44– 48
U.L. Requirements..........................................................................................................49, 50
Application Tooling ........................................................................................................51– 56
Part Number Index .........................................................................................................57– 59
2
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
How to Compute Circular Mil Area of Various Wire Shapes
Metric Dimensions
U.S. Customary Dimensions
Square or Rectangular Wire
Multiply the width of the wire cross section in
millimetres by the thickness of the wire cross
section in millimetres by 1973.525 and sub-
tract the radius factor shown below.
Multiply the width of the wire cross section
in mils by the thickness of the wire cross
section in mils by 1.2732 and subtract the
radius factor shown below.
CMA = W x T x 1973.525– radius factor
CMA = W x T x 1.2732– radius factor
Multiply the diameter in milllimetres by itself
by 1550.003
CMA = D2 x 1550.003
Round Solid Wire AWG
Stranded Wire AWG
Multiply the diameter in mils by itself.
CMA = D2
Multiply the diameter of one strand (in mils)
by itself, and then multiply the result by the
total number of strands.
Multiply the diameter of one strand in mil-
limetres by itself by the number of strands
by 1550.003.
CMA = D2 x N
CMA = D2 x N x 1550.003
Conversion Table
Radius Factor, U.S. Customary
Radius Factor, Metric
To
Radius Factor
Radius Factor
Radius
Radius
Convert
From
To
Multiply By
To Subtract
(in.)
To Subtract
(mm)
(CMA)
(CMA)
CMA
CMA
mm2
mm2
mm2 .0005067075
.010
.012
.016
.020
.026
.032
.040
.063
.094
110
158
0.25
0.3
106
153
in2
in2
.0000007854
.001550003
1973.525
280
0.35
0.4
208
CMA
438
272
740
0.5
424
1121
1752
4346
9675
0.6
611
Note: Refer to table listing for circu-
lar mil area for common wire sizes.
0.8
1086
2444
1.2
Radius must be measured.
Radius must be measured.
Table of SOLISTRAND and Budget Standard Wire Ranges
Use to select the proper size terminals or splices.
Terminal Connector
Size
Terminal Connector
Size
CMA Range
CMA Range
26–22
24–20
22–16
202–810
320–1,290
509–3,260
2,050–5,180
3,260–8,230
5,180–13,100
13,100–20,800
20,800–33,100
33,100–52,600
2 & 2 HD
1/0 & 1/0 HD
2/0
52,600–83,700
83,700–119,500
119,500–150,500
150,500–190,000
190,000–231,000
231,000–300,000
300,000–380,000
350,000–478,000
478,000–600,000
16–14 & 16–14 HD
14–12
3/0
4/0
12–10
250–300 MCM
300–350 MCM
400 MCM
500–600 MCM
8 & 8 HD
6 & 6 HD
4 & 4 HD
HD-Denotes Heavy Duty Terminal.
3
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Table listing: Circular Mil Area for common wire sizes
Strands
Nominal
Wire Sizes in AWG
and mm2 to CMA
Note: The following tables are
applicable to single and
multiple strand, round,
conductors only.
Approximate
Conductor Diameter
Wire Size
CMA
Diameter
No.
2
AWG
44
44
43
42
41
40
39
38
38
37
36
35
34
33
33
32
31
30
30
29
29
29
28
28
27
27
26
26
26
26
26
26
26
26
26
26
26
25
25
25
25
24
24
24
24
24
24
24
24
24
22
22
22
22
22
22
22
21
20
20
20
20
20
20
20
20
20
20
19
18.5
18.5
18.5
18.5
18
18
mm
Inch
0.002
0.002
0.0022
0.0025
0.0028
0.0031
0.0035
0.0039
0.004
0.0045
0.005
0.0056
0.0063
0.0071
0.0071
0.008
0.0089
0.01
mm
Inch
mm
3.8
4.0
4.8
6.3
7.8
0.002
0.002
0.002
0.003
0.004
0.005
0.006
0.008
0.008
0.010
0.013
0.016
0.020
0.025
0.026
0.032
0.040
0.051
0.053
0.064
0.077
0.080
0.089
0.093
0.102
0.103
0.121
0.127
0.127
0.127
0.128
0.130
0.139
0.141
0.146
0.152
0.154
0.159
0.159
0.161
0.162
0.197
0.201
0.203
0.203
0.204
0.205
0.207
0.207
0.241
0.321
0.322
0.324
0.324
0.329
0.355
0.382
0.411
0.503
0.507
0.511
0.519
0.519
0.519
0.519
0.523
0.563
0.601
0.653
0.756
0.766
0.778
0.778
0.811
0.815
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
26
1
10
1
7
19
1
51
6
26
10
8
0.00195
0.002
0.050
0.051
0.056
0.064
0.071
0.079
0.089
0.099
0.102
0.114
0.127
0.142
0.160
0.180
0.180
0.203
0.226
0.254
0.051
0.287
0.099
0.320
0.127
0.079
0.361
0.051
0.160
0.079
0.127
0.142
0.404
0.102
0.099
0.160
0.051
0.254
0.102
0.450
0.142
0.160
0.455
0.500
0.160
0.127
0.254
0.180
0.511
0.142
0.051
0.127
0.226
0.160
0.203
0.643
0.127
0.254
0.160
0.724
0.800
0.254
0.180
0.203
0.813
0.051
0.127
0.160
0.320
0.201
0.912
0.371
0.180
0.051
0.203
0.254
0.234
0.051
0.051
0.056
0.064
0.071
0.079
0.089
0.099
0.102
0.114
0.127
0.142
0.160
0.180
0.180
0.203
0.226
0.254
0.305
0.279
0.330
0.330
0.381
0.406
0.356
0.406
0.457
0.457
0.457
0.457
0.406
0.457
0.558
0.483
0.559
0.508
0.508
0.457
0.508
0.533
0.457
0.508
0.584
0.584
0.584
0.584
0.508
0.584
0.508
0.584
0.737
0.737
0.737
0.635
0.838
0.762
0.838
0.737
0.813
0.965
0.991
0.991
0.813
0.991
0.965
0.991
0.991
1.041
0.914
1.194
1.194
1.194
1.194
1.245
1.245
0.0022
0.0025
0.0028
0.0031
0.0035
0.0039
0.004
9.6
12.3
15.2
16.0
20.2
25.0
31.4
39.7
50.0
50.4
64.0
79.2
100.0
104.0
127.7
152.1
158.8
175.0
182.6
202
204
238
250
250
251
253
256
274
278
288
300
304
313
314
318
320
388
397
400
400
403
404
408
408
0.0045
0.005
0.0056
0.0063
0.00707
0.0071
0.008
0.0089
0.01
0.002
0.0113
0.0039
0.0126
0.005
0.0031
0.0142
0.002
0.0063
0.0031
0.005
0.0056
0.0159
0.004
0.0039
0.0063
0.002
0.01
0.004
0.0177
0.0056
0.0063
0.0179
0.0197
0.0063
0.005
Computing Circular
Mil Area
For best results, the proper
AMP terminal or splice must be
selected not by the “fit” of wire or
wires in the terminal barrel, but
by the total circular mil area in
cross section of the wires used.
For this purpose AMP has pre-
pared convenient tables to assist
in the calculation of circular mil
areas. When the totals are
known, the proper AMP terminal
or splice can be determined
quickly.
0.012
0.011
0.013
0.013
0.015
0.016
0.014
0.016
0.018
0.018
0.018
0.018
0.016
0.018
0.022
0.019
0.022
0.02
1
16
18
7
72
3
19
1
10
8
1
1
10
16
4
Unusual combinations or special
applications should be submitted
to AMP engineering department
for size recommendation. In any
application, the careful selection
of terminals by the circular mil
area method will insure the high-
est possible performance, both
electrically and mechanically, in
your AMP terminations.
0.02
0.018
0.02
0.021
0.018
0.02
0.023
0.023
0.023
0.023
0.02
0.01
8
1
0.0071
0.0201
0.0056
0.002
13
102
19
8
16
10
1
26
7
19
1
0.023
0.02
Example of multiple wire
configurations used in one
termination
475
634
635
640
640
650
700
754
0.005
0.023
0.029
0.029
0.029
0.025
0.033
0.03
0.0089
0.0063
0.008
0.0253
0.005
ALWAYS SELECT TERMINALS
BY THE CIRCULAR MIL AREA
METHOD. For example, a No.
18 AWG 16-strand conductor
(1600 CMA) and a No. 16 AWG
19-strand conductor (2426
CMA) will have a combined total
of 4026 CMA. This total CMA is
equivalent to a No. 14 AWG
conductor.
0.01
0.0063
0.0285
0.0315
0.01
0.0071
0.008
0.032
0.002
0.005
0.0063
0.0126
0.0079
0.0359
0.0146
0.0071
0.002
0.008
0.01
0.0092
0.033
0.029
0.032
0.038
0.039
0.039
0.032
0.039
0.038
0.039
0.039
0.041
0.036
0.047
0.047
0.047
0.047
0.049
0.049
812
992
1
1000
1008
1024
1024
1024
1025
1032
1111
1186
1289
1492
1512
1536
1536
1600
1608
10
20
16
1
256
41
26
7
19
1
7
30
384
24
16
19
4
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Table listing: Circular Mil Area for common wire sizes (Continued)
Strands
Wire Sizes in AWG
and mm2 to CMA
Note: The following tables are
applicable to single and
multiple strand, round,
conductors only.
Nominal
Approximate
Conductor Diameter
Wire Size
CMA
Diameter
No.
2
AWG
18
18
18
18
18
18
18
17
17
17
17
17
16
16
16
16
16
16
16
16
15.5
15.5
15.5
15.5
15
14
14
14
14
14
14
14
14
14
14
13.5
13.5
13.5
13
12
12
12
12
12
12
12
12
12
12
11.5
11.5
11.5
11.5
11
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
9
mm
Inch
0.042
0.04
mm
Inch
0.0152
0.0403
0.005
0.0063
0.0153
0.0159
0.01
mm
1617
1624
1625
1627
1639
1770
1900
1980
1999
2048
2048
2052
2426
2521
2540
2580
2581
2600
2625
2800
2942
2948
3000
3073
3260
3831
3899
4079
4099
4100
4106
4109
4128
4167
4234
4802
4842
4914
5184
6088
6343
6475
6500
6503
6509
6512
6529
6545
6654
6946
7856
7985
8064
8226
9072
9472
10080
10319
10319
10365
10376
10384
10404
10500
10867
11696
11710
11816
12066
13087
13125
14175
14368
15595
15665
0.819
0.823
0.823
0.824
0.830
0.897
0.963
1.003
1.013
1.038
1.038
1.040
1.229
1.277
1.287
1.307
1.308
1.317
1.330
1.419
1.491
1.494
1.520
1.557
1.652
1.941
1.976
2.067
2.077
2.077
2.081
2.082
2.092
2.111
2.145
2.433
2.453
2.490
2.627
3.085
3.214
3.281
3.294
3.295
3.298
3.300
3.308
3.316
3.372
3.520
3.981
4.046
4.086
4.168
4.597
4.799
5.108
5.229
5.229
5.252
5.258
5.262
5.272
5.320
5.506
5.926
5.933
5.987
6.114
6.5
7
0.386
1.024
0.127
.0160
0.389
0.404
0.254
1.130
0.429
0.203
0.051
1.151
0.287
0.180
0.320
0.160
1.290
0.254
0.127
0.508
0.521
1.379
0.254
0.071
1.450
0.361
0.599
0.267
0.615
0.254
0.373
1.628
0.320
0.160
0.180
0.249
0.668
1.781
1.829
0.455
0.157
0.127
0.254
0.470
0.320
0.775
2.052
0.338
0.226
0.800
0.851
0.521
0.305
2.304
0.914
0.406
2.550
0.424
0.320
0.404
0.978
2.588
0.594
0.254
1.001
0.300
1.039
2.761
0.640
2.91
1.067
1.016
1.016
1.245
1.067
1.219
1.321
1.143
1.194
1.194
1.245
1.143
1.549
1.499
1.499
1.499
1.295
1.549
1.499
1.549
1.499
1.372
1.499
1.549
1.448
1.930
1.803
1.854
1.930
1.956
1.930
1.626
1.905
1.854
1.880
2.210
2.007
1.778
1.829
2.438
2.413
2.667
2.438
2.337
2.388
2.184
2.057
2.362
2.388
2.388
2.540
2.565
2.591
2.311
2.438
2.769
2.540
2.769
2.997
3.099
2.438
2.591
2.972
2.946
2.997
3.302
3.251
2.769
3.200
2.90
1
65
41
7
7
19
1
0.04
0.049
0.042
0.048
0.052
0.045
0.047
0.047
0.049
0.045
0.061
0.059
0.059
0.059
0.051
0.061
0.059
0.061
0.059
0.054
0.059
0.061
0.057
0.076
0.071
0.073
0.076
0.077
0.076
0.064
0.075
0.073
0.074
0.087
0.079
0.07
0.072
0.096
0.095
0.105
0.096
0.092
0.094
0.086
0.081
0.093
0.094
0.094
0.1
0.101
0.102
0.091
0.096
0.109
0.1
0.0445
0.0169
0.008
7
32
512
1
19
50
16
65
1
26
105
7
7
1
30
392
1
19
7
37
7
41
19
1
26
105
84
50
7
0.002
0.0453
0.0113
0.0071
0.0126
0.0063
0.0508
0.01
0.005
0.02
0.0205
0.0543
0.01
0.0028
0.0571
0.0142
0.0236
0.0105
0.0242
0.01
0.0147
0.0641
0.0126
0.0063
0.0071
0.0098
0.0263
0.0701
0.072
1
1
19
165
259
65
19
41
7
0.0179
0.0062
0.005
0.01
0.0185
0.0126
0.0305
0.0808
0.0133
0.0089
0.0315
0.0335
0.0205
0.012
1
37
84
7
7
19
56
1
7
37
1
37
65
41
7
0.0907
0.036
0.016
0.1004
0.0167
0.0126
0.0159
0.0385
0.1019
0.0234
0.01
0.0394
0.0118
0.0409
0.1087
0.0252
0.1144
.0050
0.109
0.118
0.122
0.096
0.102
0.117
0.116
0.118
0.13
0.128
0.109
0.126
0.114
0.140
0.146
0.145
0.142
0.146
1
19
105
7
84
7
1
19
1
525
7
19
7
9
8
8
8
7
7
7.5
8
0.13
1.14
0.70
1.20
3.56
3.71
3.68
3.60
.0450
.0275
.0472
.0177
8
8
50
0.45
3.70
5
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Table listing: Circular Mil Area for common wire sizes (Continued)
Strands
Wire Sizes in AWG
and mm2 to CMA
Note: The following tables are
applicable to single and
multiple strand, round,
conductors only.
Nominal
Approximate
Conductor Diameter
Wire Size
CMA
Diameter
No.
2
AWG
8
8
8
8
8
8
8
7
7
7
7
7
6
6
6
6
6
6
5.5
5.5
5.5
5
5
4.5
4
4
4
4
4
3.5
3
3
3
3
2.5
2.5
2
2
2
2
2
2
2
1.5
1
1
1
0
0
0
0
0
0
00
00
00
00
000
000
000
mm
Inch
0.167
0.150
0.129
0.146
0.148
0.150
0.167
0.161
0.165
0.159
0.141
0.161
0.174
0.184
0.162
0.202
0.210
0.189
0.209
0.197
0.177
0.197
0.182
0.236
0.204
0.232
0.240
0.226
0.272
0.236
0.260
0.280
0.253
0.260
0.292
0.272
0.257
0.332
0.345
0.300
0.307
0.301
0.335
0.307
0.382
0.386
0.339
0.354
0.406
0.370
0.431
0.435
0.394
0.486
0.421
0.488
0.488
0.453
0.545
0.571
0.571
0.496
0.512
0.635
0.630
0.571
0.571
0.576
0.576
0.600
0.574
0.575
0.630
0.631
0.631
mm
4.24
3.81
3.26
3.71
3.76
3.81
4.24
4.10
4.20
4.05
3.57
4.10
4.42
4.67
4.11
5.13
5.33
4.80
5.30
5.00
4.50
5.00
4.62
6.00
5.18
5.89
6.10
5.74
6.90
6.00
6.60
7.10
6.42
6.60
7.42
6.90
6.53
8.43
8.76
7.62
7.80
7.65
8.50
7.80
9.70
9.80
8.60
9.00
10.30
9.40
10.95
11.05
10.00
12.34
10.70
12.40
12.40
11.50
13.84
14.50
14.50
12.60
13.00
16.13
16.00
14.50
14.50
14.63
14.63
15.24
14.58
14.61
16.0
16.03
16.03
Inch
.0111
.0211
.1285
.0486
.0295
.0184
.0113
.0315
.0157
.0531
.1406
.0201
.0266
.0612
.1620
.0372
.0142
.0630
.0157
.0669
.1772
.0295
.1819
.0315
.2040
.0772
.0336
.0469
.0179
.0787
.0157
.0079
.0843
.0244
.0904
.0906
.2570
.0590
.0100
.0424
.0157
.0602
.0079
.1024
.0100
.0100
.0315
.0709
.0157
.0118
.0100
.0100
.0787
.0100
.0843
.0118
.0197
.0906
.0100
.0197
.0118
.0992
.1024
.0100
.0197
.0799
.1142
.0640
.0524
.1443
.1147
.0822
.0900
.0701
.0574
mm
0.28
0.54
3.26
1.23
0.75
0.47
0.29
0.80
0.40
1.35
3.57
0.51
0.68
1.55
4.11
0.94
16387
16473
16512
16533
16535
16589
16983
18853
19719
19737
19768
19796
26179
26218
26244
26292
26818
27783
31057
31329
31400
32199
33088
40682
41616
41718
41771
41792
42615
43356
48312
48867
49745
50010
57205
57459
66049
66139
66500
66517
68031
68857
69088
73400
81700
83600
84341
95509
97610
98409
104500
106400
117680
133000
135023
139101
139712
155959
167200
184343
185468
186972
199229
210900
235959
236208
247791
249856
249864
249870
249966
250003
299700
299755
299823
8
8
8
8
8
8
8.5
10
133
37
1
7
19
49
133
19
80
7
10
10
10
10
13
13
13
15
14
14
16
16
16
16
15.5
20
21
21
21
21
21
22
25
25
25
25
34
30
34
34
35
34
35
35
35
38
41
42
40
50
50
50
53
54
60
67
70
70
70
80
85
95
95
95
1
49
37
7
1
19
133
7
126
7
1
37
1
41
1
7
37
19
133
7
196
783
7
0.36
1.60
0.400
1.700
4.500
0.750
4.620
0.800
5.182
1.961
0.853
1.191
0.455
2.000
0.400
0.200
2.140
0.620
2.296
2.300
6.528
1.499
0.254
1.077
0.400
1.530
0.200
2.600
0.254
0.254
0.800
1.800
0.400
0.300
0.254
0.254
2.000
0.254
2.140
0.300
0.500
2.300
0.254
0.500
0.300
2.520
2.600
0.254
0.500
2.030
2.900
1.623
1.331
3.665
2.913
2.088
2.29
84
7
7
1
19
665
37
276
19
1107
7
817
836
85
19
396
702
1045
1064
19
1330
19
999
360
19
1672
475
1332
19
19
2109
608
37
19
61
91
12
19
37
37
61
91
000
000
0000
0000
0000
0000
0000
250
250
250
250
250
100
105
120
120
125
127
127
127
127
127
152
152
152
300
300
300
1.781
1.458
6
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Table listing: Circular Mil Area for common wire sizes (Continued)
Strands
Wire Sizes in AWG
and mm2 to CMA
Note: The following tables are
applicable to single and
multiple strand, round,
conductors only.
Nominal
Approximate
Conductor Diameter
Wire Size
CMA
Diameter
No.
2
AWG
300
mm
Inch
mm
Inch
.1581
.1257
.0757
.0620
.1357
.1708
.0973
.1451
.1040
.0810
.0663
.1622
.1162
.0905
.0741
.0687
.1273
.0812
.0992
.0742
.1375
.1071
.0877
.1109
.0908
.1424
.0768
.1470
.1145
.0794
.0938
.0887
.1280
.1048
.1644
mm
299947
300209
349560
349804
349875
350072
350290
400026
400192
400221
400008
499868
499590
499605
499664
599401
599596
600003
600279
699216
699531
699695
699907
750227
750262
750277
749096
799533
799725
800654
800658
999197
999424
999457
1000012
152
152
177
177
177
177
177
203
203
203
203
253
253
253
253
304
304
304
304
355
355
355
355
405
405
405
405
456
456
456
456
507
507
507
507
12
19
61
91
19
12
37
19
37
61
91
19
37
61
91
127
37
91
61
127
37
61
91
61
91
37
127
37
61
127
91
127
61
91
37
4.016
3.193
1.923
1.575
3.447
4.338
2.471
3.686
2.642
2.057
1.684
4.12
2.951
2.299
1.882
1.745
3.233
2.062
2.52
0.657
0.629
0.681
0.682
0.679
0.710
0.681
0.726
0.728
0.729
0.729
0.811
0.813
0.815
0.815
0.893
0.891
0.893
0.893
0.965
0.963
0.964
0.965
0.998
0.999
0.997
0.998
1.029
1.031
1.032
1.032
1.153
1.152
1.153
1.151
14.66
15.98
17.3
17.32
17.25
18.03
17.3
18.44
18.49
18.49
18.49
20.6
300
350
350
350
350
350
400
400
400
400
500
500
500
500
600
600
600
600
700
700
700
700
750
750
750
750
800
800
800
800
1000
1000
1000
1000
20.65
20.7
20.7
22.68
22.63
22.68
22.68
24.51
24.46
24.49
24.51
25.35
25.37
25.32
25.35
26.14
26.19
26.21
26.21
29.29
29.26
29.29
29.24
1.885
3.493
2.72
2.228
2.817
2.306
3.617
1.951
3.734
2.908
2.017
2.383
2.253
3.251
2.662
4.176
Chart 2 (Solid Wire)
U.S. Customary Dimensions
Metric Dimensions
Use to convert wire size to inches of diameter and CMA. To
read mils direct, move decimal point three places to the right.
Use to convert wire size to millimeters of diameter and CMA.
Dia.
inches
Dia.
inches
Dia.
mm
Dia.
mm
AWG
CMA*
AWG
CMA*
mm2
CMA*
mm2
CMA*
4/0
3/0
2/0
1/0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
.460
.410
.365
.325
.289
.258
.229
.204
.182
.162
.144
.128
.114
.102
.091
.081
.072
.064
.057
.051
.045
.040
212,000
168,000
133,000
106,000
83,700
66,400
52,600
41,700
33,100
26,300
20,800
16,500
13,100
10,400
8,230
6,530
5,180
4,110
3,260
2,580
2,050
1,620
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
.036
.032
1,290
1,020
810
642
509
404
320
254
202
113.1
78.54
63.62
50.27
38.48
33.18
28.27
23.76
19.64
15.90
12.57
9.621
8.042
6.605
5.309
4.155
3.142
2.545
2.011
1.539
1.131
0.7854
12
10
9
8
7
6.5
6
5.5
5
4.5
4
3.5
3.2
2.9
2.6
2.3
2
1.8
1.6
1.4
1.2
1
223,000
155,000
125,000
99,200
75,900
65,500
55,800
46,900
38,800
31,400
24,800
19,000
15,900
13,000
10,500
8,200
0.6362
0.5027
0.3848
0.3318
0.2827
0.2376
0.1964
0.159
0.1257
0.09621
0.08042
0.06605
0.05309
0.04155
0.03142
0.02545
0.02011
0.01539
0.01131
0.00785
0.9
0.8
0.7
0.65
0.6
0.55
0.5
1,260
992
759
655
558
469
338
314
248
190
159
130
105
82
.0285
.0253
.0226
.0201
.0179
.0159
.0142
.0126
.0113
.0100
.0089
.0080
.0071
.0063
.0056
.0050
.0045
.0040
.0035
.0031
0.45
0.4
160
127
101
0.35
0.32
0.29
0.26
0.23
0.2
0.18
0.16
0.14
0.12
0.1
79.7
63.2
50.1
39.8
31.5
25.0
19.8
15.7
12.5
9.9
62
50.2
39.7
30.4
22.3
15.5
6,200
5,020
3,970
3,040
2,230
1,550
*Nominal CMA has been “rounded off” for ease of calculation when using multiple
wires in one termination.
7
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
The SOLISTRAND Terminal
BASIC TERMINAL MATERIAL. The
SOLISTRAND terminals and splices are
specially designed to terminate solid and
stranded wire, irregular shaped conduc-
tors, and combinations of these—still
retaining the superior performance char-
acteristics of single-purpose terminals
and splices. Because AMP matches the
terminal to the tool each termination is
uniformly perfect, making quality control
easy and performance consistent.
Corrosion resistance, vibration resis-
tance and tensile strength of these termi-
nals and splices are well within the lim-
its of commercial and military specifica-
tions. The SOLISTRAND line includes
parallel and butt splices, and flag, ring,
spade, hooked, and flanged tongue ter-
minals in sizes from 26 AWG [0.1 mm2]
through 600 MCM [304 mm2].
basic terminal is constructed of fine
grade high conductivity copper per
ASTM B-152 and tin-plated per
MIL-T-10727. Basic material for
Spring Spade Tongue Terminals is
phosphor bronze per ASTM B-103
and tin-plated per MIL-T-10727.
AMP’s special plating process cre-
ates durable corrosion resistance to
salt spray and most chemical
fumes.
BRAZED SEAM. The barrel is
completely closed and seam is
brazed for uniform metal strength
around the entire barrel area.
The Crimp
The “W” Crimp is one of several time-
proven crimp types developed by AMP.
It is not just a “kink” in a metal barrel;
not something pinched over electrical
wire ends. The “W” Crimp is actually two
longitudinal crimps applied with pre-
cisely controlled pressure so that the
conductor within the barrel flows togeth-
er into the dimples or serrations of the
terminal barrel creating one homoge-
neous mass of metal. The two indents
also help to center conductors within the
barrel for uniform crimping of the barrel
around the wire. Furthermore, the “W”
Crimp permits the use of a shorter termi-
nal barrel, an excellent feature for con-
fined area termination.
BELL MOUTH. Bell shape of barrel
entrance makes insertion of wires
easier.
DIMPLES OR SERRATIONS. Inner
surface either dimpled or serrated
for optimum tensile strength and
maximum electrical contact area
after crimping.
SOLISTRAND Terminals meet or
exceed the requirements of
MIL-T-7928, Type I, Class 1 and 2.
Temperature Rating: 170°C Max.
The “W” Crimp creates terminations of
optimum electrical properties and is
completely reliable, giving long service
in punishing environments.
AMP SOLISTRAND Terminals and Splices
(Use SOLISTRAND Tooling)
AMP Inc.
Wire Size
Listed
File No. E13288
LR 7189
Certified
22–16
Solid or Stranded
22–16
Solid or Stranded
22–16
Solid or Stranded
“W” Crimp
16–14
Solid or Stranded
16–14
Solid or Stranded
16–14
Solid or Stranded
16–14 Heavy Duty
Solid or Stranded
16–14 Heavy Duty
Stranded
16–14 Heavy Duty
Solid or Stranded
14–12
Solid or Stranded
14–12
Stranded
14–12
Solid or Stranded
12–10
Solid or Stranded
12–10
Stranded
12–10
Solid or Stranded
One Solid
Two Solid
8 thru 600 MCM
Solid or Stranded
8 thru 600 MCM
Stranded
8 thru 600 MCM
Solid or Stranded
Note: 22-16 terminals and splices are stamped 22-18 in accordance with
MIL-T-7928. Commercial wire range is 22-16.
DANGER: Not to be used on aluminum wire — may cause equipment
failure leading to serious injury or death.
One Solid
Two Stranded
One Stranded
8
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
The Budget Terminal
BASIC TERMINAL MATERIAL. The
Budget Terminals and splices are pri-
marily the same as SOLISTRAND prod-
ucts except for the absence of the brazed
seam in the wire barrel. This terminal is
ideal for applications where extreme
vibration and tension on the wire are not
present. These terminals and splices ful-
fill the need for an economical and elec-
trically superior termination through the
use of high grade materials, long plating
experience and a proven crimp.
basic terminal is constructed of fine
grade high conductivity copper per
ASTM B-152 and tin-plated per MIL-
T-10727. Basic material for Spring
Spade Tongue Terminals is phos-
phor bronze per ASTM B-103 and
tin-plated per MIL-T-10727. AMP’s
special plating process creates
durable corrosion resistance to salt
spray and most chemical fumes.
One of the most desirable features of this
terminal and splice is the “F” Crimp.
This proven crimp configuration rolls the
open seam barrel into the conductor pre-
senting a large surface to the inside of
the terminal barrel assuring optimum
electrical performance.
The Budget line includes butt splices,
ring, rectangular, flanged spade, hooked,
and spring spade tongue terminals in
sizes from 26 AWG [0.1 mm2] through
10 AWG [6.64 mm2].
SERRATIONS. Inner surface
serrated for optimum tensile
strength and maximum electrical
contact area after crimping.
BELL MOUTH. Bell shape of barrel
entrance makes insertion of wires
easier.
Temperature Rating: 170°C Max.
AMP Budget Terminals and Splices
(Use Budget Tooling)
Listed
File No. E13288
Wire Size
22–16
Stranded
22–16
Stranded
16–14
Stranded
16–14
Stranded
12–10
Stranded
12–10
Stranded
Note: 22-16 terminals and splices are stamped
22-18 in accordance with MIL-T-7928.
Commercial wire range is 22-16.
9
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
DIAMOND GRIP Terminal
COPPER SLEEVE. The specially
designed copper sleeve, fitted
over the terminal barrel, provides
circumferential insulation support
to the wire and allows the wire to
be bent in any direction, without
fraying the wire’s insulation or
breaking the conductor.
The DIAMOND GRIP product line of ter-
minals and splices is designed for com-
pletely uniform reliability under the most
critical conditions of vibration, thermal
shock, corrosion, tension and current
overload. AMP’s mated tool/terminal
concept represents a total approach to
wire termination and takes into account
all the factors of circuit termination.
SERRATIONS. Serrations inside
the barrel provide maximum contact
and tensile strength after crimping.
The uniformity of appearance of AMP
terminations is repeated by their unifor-
mity in performance— made possible
by designing the terminal and the tool-
ing to match precisely. This promotes
fast and easy crimping and assures pre-
cise crimping pressure for every wire
size, regardless of the skill of the opera-
tor. The result is the best circuit termina-
tion at the lowest applied cost. And this
is true for all terminations from first to
last, week after week, month after month.
BELL MOUTH. Assures
easy wire insertion.
BASIC TERMINAL MATERIAL.
The basic terminal is constructed of
fine grade high conductivity copper
per ASTM B-152 and tin-plated per
MIL-T-10727. AMP’s special plating
process creates durable corrosion
resistance to salt spray and most
chemical fumes.
The Crimp
After the wire is inserted into the barrel,
the matching dies in the AMP tool close
over the barrel, exerting great pressure.
This causes the wire strands to flow into
the serrations of the terminal barrel as it
is compressed around them, forming a
homogenous mass of the strands and
terminal barrel. This maximum contact
assures optimum conductivity of the
termination.
“V” NOTCHES. These
lock the wire insulation
against vibration and
pullout.
Temperature Rating: 170°C Max.
DIAMOND GRIP Terminals and Splices
(Use DIAMOND GRIP Tooling)
AMP
LR 7189
Certified
Wire
Listed
Range
22–16
22–16
22–16
16–14
Stranded
Stranded
16–14
Stranded
16–14
Stranded
16–14 HD
Stranded
16–14 HD
12-10
—
12–10
Stranded
12–10
Stranded
10
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Terminal Stud Hole Size
Use to Select Proper Size Terminal
The chart shows sizes and dimensions of various studs and the corresponding terminal stud hole sizes used with AMP devices.
For example, with stud #5 (.125 [3.18] Diameter), use AMP device listed for #5 stud (.132 [3.35] Hole Diameter).
Terminal stud hole sizes may easily be checked by fitting sample terminal to black circle.
Stud Size
Stud Size
Typical Terminal
Stud Hole Diameter
Typical Terminal
Stud Hole Diameter
Stud Dia.
Stud Dia.
U.S. Cust. Metric
U.S. Cust. Metric
.060
.067 .003
0#0
0#1
0#2
—
—
1.52
1.70 0.08
.437
.453 .005
.073
1.85
.080 .003
2.03 0.08
7/16"
1/2"
—
11.10
11.51 0.13
.086
2.18
.093 .003
2.36 0.08
M2
.099
0#3
0#4
0#5
—
—
Not Available
.500
12.70
.515 .005
13.08 0.13
2.51
M12
.112
2.84
.119 .003
3.02 0.08
.125
3.18
.132 .003
3.35 0.08
M3
.625
.656 .005
5/8"
3/4"
M16
.138
.145 .003
15.88
16.66 0.13
0#6
0#8
M3.5
M4
3.51
3.68 0.08
.164
4.17
.171 .003
4.34 0.08
.190
4.83
.197 .003
5.00 0.08
#10
#12
—
—
.750
19.05
.781 .005
19.84 0.13
—
.216
5.49
.223 .003
5.66 0.08
.242
.250 .003
#14
1/4"
—
6.15
6.35 0.08
.875
22.23
.906 .005
23.01 0.13
7/8"
M22
.250
6.35
.265 .005
6.73 0.13
M6
.312
.328 .005
5/16"
3/8"
M8
—
7.92
8.33 0.13
.375
9.53
.390 .005
9.91 0.13
1.000
25.40
1.031 .005
26.19 0.13
1"
—
11
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Ring Tongue Terminals
Wire Size Range
AWG 26 to 16,
CMA 202 to 3,260
[0.1 to 1.65 mm2]
Material
Terminal Body—Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
A
Dimensions
Wire Size
Stud
Material
Thickness
Max.
Wire Barrel I.D. Min.
Part Numbers
Circular Mils
Style
L
Max.
E
C
Min.
Size
2
W
Solistrand
Budget
Solistrand
Budget
[
]
mm
Max.
.329
.256
.121
.140
.020
.035
0
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
—
—
—
—
0-31423-0
8.36
6.50
3.07
3.56
0.51
0.89
.329
8.36
.256
6.50
.121
3.07
.140
3.56
.020
0.51
.035
0.89
0-31425-0
2-31425-2
—
—
2
M2
.450
11.43
.346
8.79
.211
5.36
.203
5.16
.020
0.51
.035
0.89
0-33695-0
0-322771-0
0-31428-0
0-31430-0
0-32858-0
0-32859-0
0-32860-0
0-31087-0
0-31088-0
1320677-0
.419
10.64
.346
8.79
.211
5.36
.140
3.56
.020
0.51
.031
0.79
.035
0.89
0-50334*
—
.450
11.43
.346
8.79
.211
5.36
.203
5.16
.020
0.51
.035
0.89
4
—
—
26–22
202–810
[0.1–0.41]
.450
11.43
.346
8.79
.211
5.36
.203
5.16
.020
0.51
.035
0.89
—
6
M3.5
.544
13.82
.416
10.57
.281
7.14
.250
6.35
.020
0.51
.031
0.79
.035
0.89
0-331401-0
1-331401-1
.544
13.82
.416
10.57
.281
7.14
.250
6.35
.020
0.51
.035
0.89
8
10
1
—
—
—
—
—
—
.544
13.82
.416
10.57
.281
7.14
.250
6.35
.020
0.51
.035
0.89
.449
11.40
.337
8.56
.156
3.96
.218
5.54
.033
0.84
.065
1.65
.449
11.40
.337
8.56
.156
3.96
.218
5.54
.033
0.84
.061
1.55
.065
1.65
0-34103-0
2-34103-1
2
M2
.446
11.33
.353
8.97
.172
4.37
.182
4.62
.033
0.84
.061
1.55
.065
1.65
0-322927-0
.449
11.40
.337
8.56
.156
3.96
.218
5.54
.033
0.84
.061
1.55
.065
1.65
0-34104*0
2-34104-6
0-31089-0
3-31089-6
.446
11.33
.353
8.97
.172
4.37
.182
4.62
.033
0.84
.061
1.55
.065
1.65
0-36189-0
2-326850-1
4
0-36467*
.621
15.77
.493
12.52
.312
7.92
.250
6.35
.033
0.84
.061
1.55
.065
1.65
0-323096-0
2-323096-2
0322418-0
5
M3
.449
11.40
.337
8.56
.156
3.96
.218
5.54
.033
0.84
.065
1.65
0-31090-0
2-31090-1
—
—
22–16
509–3,260
[0.26–1.65]
.449
.337
.156
.218
.033
.061
1.55
0-34105*0
2-34105-2
.065
A
A
A
A
A
A
A
A
0-31091-0
0-31101-0
0-31264-0
11.40
8.56
3.96
5.54
0.84
1.65
.528
13.41
.416
10.57
.156
3.96
.218
5.54
.033
0.84
.061
1.55
.065
1.65
0-34194-0
6
.574
14.58
.436
11.07
.250
6.35
.281
7.14
.033
0.84
.061
1.55
.065
1.65
0-34107*0
2-34107-2
M3.5
.621
15.77
.462
11.73
.281
7.14
.312
7.92
.033
0.84
.061
1.55
.065
1.65
0-34110*0
2-34110-3
0-30691*0
1-30691-1
.653
16.59
.478
12.14
.297
7.54
.344
8.74
.033
0.84
.065
1.65
—
—
0-32822-0
0-30692-0
0-31265*0
0-32823-0
.621
15.77
.462
11.73
.281
7.14
.312
7.92
.033
0.84
.061
1.55
.065
1.65
0-34111*0
2-34111-3
8
M4
.574
14.58
.436
11.07
.250
6.35
.281
7.14
.033
0.84
.061
1.55
.065
1.65
0-34108*0
2-34108-2
.653
16.59
.478
12.14
.297
7.54
.344
8.74
.033
0.84
.061
1.55
.065
1.65
0-323086-0
Note: Part numbers are shown as loose piece over tape mounted product.
*Part numbers are available in small quantity packages.
12
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Ring Tongue Terminals (Continued)
Wire Size Range
AWG 22 to 14,
CMA 509 to 5,180
[0.26 to 2.62 mm2]
Material
Terminal Body—Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
A
Dimensions
Wire Size
Stud
Material
Thickness
Max.
Wire Barrel I.D. Min.
Part Numbers
Circular Mils
Style
L
Max.
E
C
Min.
Size
2
W
Solistrand
Budget
Solistrand
Budget
[
]
mm
Max.
.621
.462
.281
.312
.033
.061
.065
0-34112*0
2-34112-2
0-30693*0
3-30693-7
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
15.77
11.73
7.14
7.92
0.84
1.55
1.65
.574
14.58
.436
11.07
.250
6.35
.281
7.14
.033
0.84
.061
1.55
.065
1.65
0-34109*0
2-34109-2
0-31266-0
0-32824-0
10
12
.653
16.59
.478
12.14
.297
7.54
.344
8.74
.033
0.84
.061
1.55
.065
1.65
0-323087*0
—
.621
15.77
.462
11.73
.281
7.14
.312
7.92
.033
0.84
.065
1.65
0-30694-0
2-30694-1
—
22–16
509–3,260
1/4
M6
.856
21.74
.618
15.70
.437
11.10
.469
11.91
.033
0.84
.061
1.55
.065
1.65
0-34113*0
2-34113-2
0-31172-0
[
]
0.26–1.65
.856
21.74
.618
15.70
.437
11.10
.469
11.91
.033
0.84
.061
1.55
.065
1.65
0-34114*0
2-34114-2
0-31173-0
3-31173-3
5/16
M8
.995
25.27
.727
18.47
.546
13.87
.531
13.49
.033
0.84
.065
1.65
—
—
0-324124-0
0-31498-0
0-328970-0
0-321007- 0
0-326854- 0
0-32185-0
.995
25.27
.727
18.47
.546
13.87
.531
13.49
.033
0.84
.061
1.55
.065
1.65
0-34115*0
2-34115-2
3/8
1/2
M12
1.070
27.18
.711
18.06
.530
13.46
.713
18.11
.033
0.84
.061
1.55
.065
1.65
0-329966*0
—
.480
12.19
.352
8.94
.171
4.34
.250
6.35
.033
0.84
.089
2.26
—
2
M2
.445
11.30
.352
8.94
.171
4.34
.180
4.57
.033
0.84
.085
2.16
.089
2.26
0-328377-0
.480
12.19
.352
8.94
.171
4.34
.250
6.35
.033
0.84
.085
2.16
.089
2.26
0-34119*0
2-34119-1
4
.636
16.15
.462
11.73
.281
7.14
.343
8.71
.033
0.84
.085
2.16
.089
2.26
0-34121*0
2-34121-1
0-30695-0
6
.480
12.19
.352
8.94
.171
4.34
.250
6.35
.033
0.84
.085
2.16
.089
2.26
0-34120*0
2-34120-1
0-32186*0
0-321683-0
0-30696*0
M3.5
.590
14.99
.431
10.95
.250
6.35
.312
7.92
.033
0.84
.085
2.16
.089
2.26
0-321684*0
2-321684-1
16–14
.636
16.15
.462
11.73
.281
7.14
.343
8.71
.033
0.84
.085
2.16
.089
2.26
0-34122*0
2-34122-1
2,050–5,180
[1.04–2.62]
8
M4
.590
14.99
.431
10.95
.250
6.35
.312
7.92
.033
0.84
.085
2.16
.089
2.26
0-324955*0
2-324955-1
0-322235- 0
1-322235-1
.621
15.77
.462
11.73
.281
7.14
.312
7.92
.033
0.84
.089
2.26
—
—
0-51872-5
0-30697*0
0-31049-0
0-31163-0
0-34896-0
.636
16.15
.462
11.73
.281
7.14
.343
8.71
.033
0.84
.085
2.16
.089
2.26
0-34123*0
2-34123-1
10
.669
16.99
.510
12.95
.250
6.35
.312
7.92
.033
0.84
.085
2.16
.089
2.26
0-320093-0
2-320093-1
.855
21.72
.618
15.70
.437
11.10
.469
11.91
.033
0.84
.089
2.26
12
14
—
—
—
—
.730
18.54
.493
12.52
.312
7.92
.468
11.89
.033
0.84
.089
2.26
Note: Part numbers are shown as loose piece over tape mounted product.
*Part numbers are available in small quantity packages.
13
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Ring Tongue Terminals (Continued)
Wire Size Range
AWG 16 to 10,
CMA 2,050 to 13,100
[1.04 to 6.64 mm2]
Material
Terminal Body—Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
A
B
Dimensions
Wire Size
Stud
Material
Thickness
Max.
Wire Barrel I.D. Min.
Part Numbers
Circular Mils
Style
L
Max.
E
Max.
Size
2
C
W
Solistrand
Budget
Solistrand
Budget
0-31164-0
0-31165-0
0-31499-0
0-328971-0
0-50982-0
—
[
]
mm
1/4
M6
.855
.618
.437
.469
.033
.085
.089
0-34124*0
2-34124-1
A
A
A
A
A
B
B
B
B
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
21.72
15.70
11.10
11.91
0.84
2.16
2.26
5/16
M8
.855
21.72
.618
15.70
.437
11.10
.469
11.91
.033
0.84
.085
2.16
.089
2.26
0-34125*0
2-34125-6
16–14
.995
25.27
.727
18.47
.546
13.87
.531
13.49
.033
0.84
.085
2.16
.089
2.26
0-34126*0
2-34126-2
2,050–5,180
[1.04–2.62]
3/8
1.070
27.18
.711
18.06
.530
13.46
.713
18.11
.033
0.84
.089
2.26
—
—
1/2
M12
1.184
30.07
.806
20.47
.625
15.88
.750
19.05
.033
0.84
.085
2.16
.089
2.26
0-50981-0
0-321827-0
8
M4
.685
17.40
.526
13.36
.250
6.35
.312
7.92
.042
1.07
.098
2.49
—
—
—
—
—
.739
18.77
.526
13.36
.250
6.35
.421
10.69
.042
1.07
.098
2.49
0-34484-0
1-34484-0
—
10
14–12
3,260–8,230
[1.65–4.17]
.685
17.40
.526
13.36
.250
6.35
.312
7.92
.042
1.07
.098
2.49
0-321828-0
1-321828-0
—
1/4
M6
.739
18.77
.526
13.36
.250
6.35
.421
10.69
.042
1.07
.098
2.49
0-34487-0
0-34486-0
0-322447
—
1.120
28.45
.774
19.66
.437
11.10
.687
17.45
.042
1.07
.098
2.49
3⁄8
4
—
.630
16.00
.487
12.37
.219
5.56
.281
7.14
.042
1.07
.129
3.28
.134
3.40
0-34891-0
0-34892-0
0-324910-0
0-31112-0
0-34404*0
0-31113-0
0-32882-0
0-31114*0
0-321829-0
0-34964-0
0-31120-0
0-34965-0
0-31122*0
0-34966-0
0-31123-0
.630
16.00
.487
12.37
.219
5.56
.281
7.14
.042
1.07
.129
3.28
.134
3.40
0-35476*0
2-35476-1
6
M3.5
.729
18.52
.570
14.48
.302
7.67
.312
7.92
.042
1.07
.129
3.28
.134
3.40
0-324911-0
.765
19.43
.575
14.61
.302
7.67
.375
9.53
.042
1.07
.129
3.28
.134
3.40
0-33456-0
2-33456-1
.708
17.98
.549
13.94
.281
7.14
.312
7.92
.042
1.07
.129
3.28
.134
3.40
0-322454*0
8
M4
.765
19.43
.575
14.61
.302
7.67
.375
9.53
.042
1.07
.129
3.28
.134
3.40
0-32994*0
2-32994-1
.723
18.36
.549
13.94
.281
7.14
.343
8.71
.042
1.07
.129
3.28
.134
3.40
0-322455-0
2-322455-1
12–10
5,180–13,100
[2.62–6.64]
.765
19.43
.575
14.61
.302
7.67
.375
9.53
.042
1.07
.129
3.28
.134
3.40
0-33457*0
2-33457-2
.808
20.52
.618
15.70
.343
8.71
.375
9.53
.042
1.07
.129
3.28
.134
3.40
0-31805-0
10
.865
21.97
.612
15.54
.344
8.74
.500
12.70
.042
1.07
.129
3.28
.134
3.40
0-35771*0
2-35771-1
1.004
25.50
.736
18.69
.468
11.89
.531
13.49
.042
1.07
.129
3.28
.134
3.40
0-36451-0
.865
21.97
.612
15.54
.344
8.74
.500
12.70
.042
1.07
.129
3.28
.134
3.40
0-35772*0
2-35772-1
1/4
M6
1.004
25.50
.736
18.69
.468
11.89
.531
13.49
.042
1.07
.129
3.28
.134
3.40
0-33458*0
2-33458-3
.865
21.97
.612
15.54
.344
8.74
.500
12.70
.042
1.07
.134
3.40
—
—
5/16
M8
1.004
25.50
.736
18.69
.468
11.89
.531
13.49
.042
1.07
.129
3.28
.134
3.40
0-33459*0
2-33459-6
Note: Part numbers are shown as loose piece over tape mounted product.
*Part numbers are available in small quantity packages.
14
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Ring Tongue Terminals (Continued)
Wire Size Range
AWG 12 to 8,
CMA 5,180 to 20,800
[2.62 to 10.5 mm2]
Material
Terminal Body—Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
C
A
Dimensions
Wire Size
Stud
Material
Thickness
Max.
Wire Barrel I.D. Min.
Part Numbers
Circular Mils
Style
L
Max.
E
Max.
Size
2
C
W
Solistrand
Budget
Solistrand
Budget
0-30972-0
0-34833-0
0-52269-1
0-34834-0
0-320760-0
0-320761-0
0-320762-0
—
[
]
mm
1.098
.799
.531
.593
.042
.129
.134
*033220*0
A
A
A
A
A
A
A
A
A
C
C
27.89
20.29
13.49
15.06
1.07
3.28
3.40
*1-33220-23
3/8
1.271
32.28
.893
22.68
.625
15.88
.750
19.05
.042
1.07
.129
3.28
.134
3.40
03222420
—
1.102
27.99
.742
18.85
.474
12.04
.715
18.16
.042
1.07
.134
3.40
—
1/2
M12
1.271
32.28
.893
22.68
.625
15.88
.750
19.05
.042
1.07
.129
3.28
.134
3.40
0-35135-0
*2-35135-23
12-10
5,180–13,100
[2.62-6.64]
1.896
48.16
1.268
32.21
1.000
25.40
1.250
31.75
.042
1.07
.129
3.28
.134
3.40
0-320763-0
0-320764-0
0-320765-0
1-320765-1
1-320765-0
5/8
M16
1.896
48.16
1.268
32.21
1.000
25.40
1.250
31.75
.042
1.07
.129
3.28
.134
3.40
1.896
48.16
1.268
32.21
1.000
25.40
1.250
31.75
.042
1.07
.129
3.28
.134
3.40
3/4
7/8
M22
1.896
48.16
1.268
32.21
1.000
25.40
1.250
31.75
.042
1.07
.129
3.28
—
—
—
—
1.896
48.16
1.268
32.21
1.000
25.40
1.250
31.75
.042
1.07
.129
3.28
1
—
.949
24.10
.743
18.87
.359
9.12
.406
10.31
.051
1.30
.172
4.37
*
0 324061*0
—
8
M4
.933
23.70
.696
17.68
.359
9.12
.469
11.91
.051
1.30
.172
4.37
*
0 32996*0
—
0*33460*0
*12-33460-2*1
*22-33460-3*2
.933
.696
.359
.469
.051
.172
C
C
C
—
—
—
—
—
—
23.70
17.68
9.12
11.91
1.30
4.37
10
.949
24.10
.743
18.87
.359
9.12
.406
10.31
0.51
1.30
.172
4.37
0-31807-0
*22-31807-2*2
0-33461*0
*12-33461-2*1
*22-33461-3*2
.933
23.70
.696
17.68
.359
9.12
.469
11.91
.051
1.30
.172
4.37
1/4
M6
1.168
29.67
.868
22.05
.531
13.49
.594
15.09
.051
1.30
.172
4.37
*
A
A
A
C
A
A
A
A
A
—
—
—
—
—
—
—
—
—
0 35247*0
—
—
—
—
—
—
—
—
—
8
1.168
29.67
.868
22.05
.531
13.49
.594
15.09
.051
1.30
.172
4.37
0*33462*0
2-33462-12
13,100–20,800
[6.64–10.5]
5/16
M8
1.074
27.28
.790
20.07
.406
10.31
.562
14.27
.051
1.30
.172
4.37
*
0 31808*0
.933
23.70
.696
17.68
.359
9.12
.469
11.91
.051
1.30
.172
4.37
0-55991-1
0-55991-2
1.168
29.67
.868
22.05
.531
13.49
.594
15.09
.051
1.30
.172
4.37
*
0 33463*0
3/8
1.965
49.91
1.337
33.96
1.000
25.40
1.250
31.75
.051
1.30
.172
4.37
0-36499-0
1/2
M12
1.965
49.91
1.337
33.96
1.000
25.40
1.250
31.75
.051
1.30
.172
4.37
*
0 35664*0
5/8
M16
1.965
49.91
1.337
33.96
1.000
25.40
1.250
31.75
.051
1.30
.172
4.37
0-35665-0
0-35666-0
1.965
49.91
1.337
33.96
1.000
25.40
1.250
31.75
.051
1.30
.172
4.37
3/4
Note: Part numbers are shown as loose piece over tape mounted product.
*Part numbers are available in small quantity packages.
1Requires a 69875 standard TAPETRONIC machine for application.
2Requires a 68250-1 Heavy Duty TAPETRONIC machine for application.
3Requires a 68250-1 Heavy Duty TAPETRONIC and 68242-2 die set for application.
15
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Ring Tongue Terminals (Continued)
Wire Size Range
AWG 6 to 4,
CMA 20,800 to 52,600
[10.5 to 26.7 mm2]
Material
Terminal Body—Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
C
A
Dimensions
Wire Size
Stud
[mm2]
Material
Thickness
Max.
Wire Barrel I.D. Min.
Solistrand
Part Numbers
Solistrand
Circular Mils
Size
Style
L
Max.
E
C
W
Max.
1.181
.931
.531
.406
.060
.232
*0-52197*-0
0-52197-1
C
C
C
C
C
C
C
C
A
C
C
A
A
A
A
C
A
C
A
C
A
A
C
C
30.00
23.65
13.49
10.31
1.52
5.89
1.181
30.00
.984
24.99
.584
14.83
.406
10.31
.060
1.52
.232
5.89
0-53106-1
*33464*
10
1.246
31.65
.931
23.65
.531
13.49
.625
15.88
.060
1.52
.232
5.89
1.168
29.67
.931
23.65
.531
13.49
.468
11.89
.060
1.52
.232
5.89
*321298*
2-321298-6
1.246
31.65
.931
23.65
.531
13.49
.625
15.88
.060
1.52
.232
5.89
*33465*
2-33465-1
1/4
M6
1.168
29.67
.931
23.65
.531
13.49
.468
11.89
.060
1.52
.232
5.89
*321598*
2-321598-3
5/16
M8
1.246
31.65
.931
23.65
.531
13.49
.625
15.88
.060
1.52
.232
5.89
*33466*
2-33466-3
6
20,800–33,100
[10.5–16.8]
1.246
31.65
.931
23.65
.531
13.49
.625
15.88
.060
1.52
.232
5.89
*33467*
2-33467-3
3/8
2.033
51.64
1.400
35.56
1.000
25.40
1.250
31.75
.060
1.52
.232
5.89
36807
1.246
31.65
.931
23.65
.531
13.49
.625
15.88
.060
1.52
.232
5.89
7/16
320745
1.840
46.74
1.400
35.56
1.000
25.40
.875
22.23
.060
1.52
.232
5.89
*
320344*
1/2
M12
2.033
51.64
1.400
35.56
1.000
25.40
1.250
31.75
.060
1.52
.232
5.89
36808
36809
36810
2.033
51.64
1.400
35.56
1.000
25.40
1.250
31.75
.060
1.52
.232
5.89
5/8
3⁄4
2.033
51.64
1.400
35.56
1.000
25.40
1.250
31.75
.060
1.52
.232
5.89
1.314
33.38
.978
24.84
.516
13.11
.656
16.66
.073
1.85
.296
7.52
*
33468*
10
1.199
30.45
.946
24.03
.437
11.10
.500
12.70
.073
1.85
.280
7.11
33114
1.314
33.38
.978
24.84
.516
13.11
.656
16.66
.073
1.85
.296
7.52
*
33469*
1/4
M6
1.199
30.45
.946
24.03
.437
11.10
.500
12.70
.073
1.85
.280
7.11
2-31811-4
*
1.314
33.38
.978
24.84
.516
13.11
.656
16.66
.073
1.85
.296
7.52
4
33470*
33,100–52,600
5/16
M8
[
]
16.8–26.7
1.324
33.63
1.009
25.63
.500
12.70
.625
15.88
.073
1.85
.280
7.11
33115
*
1.314
33.38
.978
24.84
.516
13.11
.656
16.66
.073
1.85
.296
7.52
33471*
2.090
53.09
1.462
37.13
1.000
25.40
1.250
31.75
.073
1.85
.296
7.52
36815
322704
31812
3/8
1.902
48.31
1.462
37.13
1.000
25.40
.875
22.23
.073
1.85
.296
7.52
1.324
33.63
1.009
25.63
.500
12.70
.625
15.88
.073
1.85
.280
7.11
Note: Part numbers are shown as loose piece over tape mounted product.
*Part numbers are available in small quantity packages.
semi-automatic pneumatic crimping system.
16
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Ring Tongue Terminals (Continued)
Wire Size Range
AWG 4 to 1/0,
CMA 33,100 to 119,500
[16.8 to 60.6 mm2]
Material
Terminal Body—Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
B
C
D
Dimensions
Wire Size
Stud
[mm2]
Material
Thickness
Max.
Wire Barrel I.D. Min.
Solistrand
Part Numbers
Solistrand
Circular Mils
Size
Style
L
Max.
E
C
W
Max.
1.314
.978
.516
.656
.073
.296
7/16
A**
A**
B
320743
33.38
24.84
13.11
16.66
1.85
7.52
2.090
53.09
1.462
37.13
1.000
25.40
1.250
31.75
.073
1.85
.296
7.52
*
35668*
1/2
M12
4
1.902
48.31
1.462
37.13
1.000
25.40
.875
22.23
.073
1.85
.296
7.52
*
33,100–52,600
[16.8–26.7]
5/8
327175*
2.090
53.09
1.462
37.13
1.000
25.40
1.250
31.75
.073
1.85
.296
7.52
A**
A**
B
35669
35670
M16
2.090
53.09
1.462
37.13
1.000
25.40
1.250
31.75
.073
1.85
.296
7.52
3/4
10
1.527
38.79
1.212
30.78
.531
13.49
.625
15.88
.073
1.85
.370
9.40
330301
*320383*
320138
35183
1.527
38.79
1.212
30.78
.531
13.49
.625
15.88
.073
1.85
.370
9.40
B
1/4
M6
1.657
42.09
1.212
30.78
.531
13.49
.890
22.61
.073
1.85
.370
9.40
D
1.657
42.09
1.212
30.78
.531
13.49
.890
22.61
.073
1.85
.370
9.40
D
5/16
M8
1.527
38.79
1.212
30.78
.531
13.49
.625
15.88
.073
1.85
.370
9.40
B
*322870*
1.527
38.79
1.212
30.78
.531
13.49
.625
15.88
.073
1.85
.370
9.40
*
B
321600*
3/8
2
1.657
1.212
.531
.890
.073
.370
D
35184
320741
35185*
323291
320754
320755
36915
52,600–83,700
[26.7–42.4]
42.09
30.78
13.49
22.61
1.85
9.40
1.657
42.09
1.212
30.78
.531
13.49
.890
22.61
.073
1.85
.370
9.40
7/16
D
1.657
1.212
.531
.890
.073
.370
D
42.09
30.78
13.49
22.61
1.85
9.40
1/2
M12
2.516
63.91
1.888
47.96
1.125
28.58
1.250
31.75
.073
1.85
.370
9.40
D
5/8
M16
2.516
63.91
1.888
47.96
1.125
28.58
1.250
31.75
.073
1.85
.370
9.40
D
2.516
63.91
1.888
47.96
1.125
28.58
1.250
31.75
.073
1.85
.370
9.40
3/4
D
1.956
49.68
1.529
38.84
.625
15.88
.875
22.23
.073
1.85
.444
11.28
C
1/4
M6
1.925
48.90
1.532
38.91
.625
15.88
.807
20.50
.073
1.85
.444
11.28
C
321866
36916*
1.956
49.68
1.529
38.84
.625
15.88
.875
22.23
.073
1.85
.444
11.28
C
5/16
M8
1/0
1.925
48.90
1.532
38.91
.625
15.88
.807
20.50
.073
1.85
.444
11.28
*
C
321867*
83,700–119,500
[42.4–60.6]
1.956
1.529
.625
.875
.073
.444
*
C
36917*
49.68
38.84
15.88
22.23
1.85
11.28
3/8
1.925
48.90
1.532
38.91
.625
15.88
.807
20.50
.073
1.85
.444
11.28
C
321868
36918
1.956
49.68
1.529
38.84
.625
15.88
.875
22.23
.073
1.85
.444
11.28
7/16
C
*Part numbers are available in small quantity packages.
** See style A art on preceding page.
17
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Ring Tongue Terminals (Continued)
Wire Size Range
AWG 1/0 to 3/0,
CMA 83,700 to 190,000
[42.4 to 96.3 mm2]
Material
Terminal Body—Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
C
B
Dimensions
Wire Size
Stud
[mm2]
Material
Thickness
Max.
Wire Barrel I.D. Min.
Solistrand
Part Numbers
Solistrand
Circular Mils
Size
Style
L
Max.
E
C
W
Max.
1.956
1.529
.625
.875
.073
.444
C
36919*
322291
320744
320748
321869
36921
49.68
38.84
15.88
22.23
1.85
11.28
1/2
M12
2.678
68.02
2.063
52.40
1.125
28.58
1.265
32.13
.073
1.85
.444
11.28
1/0
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
B
B
B
B
B
B
83,700–119,500
[42.4–60.6]
5/8
M16
2.678
68.02
2.063
52.40
1.125
28.58
1.265
32.13
.073
1.85
.444
11.28
2.678
68.02
2.063
52.40
1.125
28.58
1.265
32.13
.073
1.85
.444
11.28
3/4
1.930
49.02
1.550
39.37
.625
15.88
.926
23.52
.083
2.11
.504
12.80
1/4
M6
2.000
50.80
1.545
39.24
.625
15.88
.946
24.03
.083
2.11
.504
12.80
1.930
49.02
1.550
39.37
.625
15.88
.926
23.52
.083
2.11
.504
12.80
321870*
36922
5/16
M8
2.000
50.80
1.545
39.24
.625
15.88
.946
24.03
.083
2.11
.504
12.80
1.930
49.02
1.550
39.37
.625
15.88
.926
23.52
.083
2.11
.504
12.80
321871*
36923*
321872
321873*
36925*
322391
322224
322225
323868
321874
320266
321875*
36927*
321876
3/8
2.000
50.80
1.545
39.24
.625
15.88
.946
24.03
.083
2.11
.504
12.80
2/0
119,500–150,500
1.930
49.02
1.550
39.37
.625
15.88
.926
23.52
.083
2.11
.504
12.80
[
]
60.6–76.3
7/16
1.930
49.02
1.550
39.37
.625
15.88
.926
23.52
.083
2.11
.504
12.80
1/2
M12
2.000
50.80
1.545
39.24
.625
15.88
.946
24.03
.083
2.11
.504
12.80
2.671
67.84
2.056
52.22
1.125
28.58
1.270
32.26
.083
2.11
.504
12.80
5/8
M16
2.671
67.84
2.056
52.22
1.125
28.58
1.270
32.26
.083
2.11
.504
12.80
2.671
67.84
2.056
52.22
1.125
28.58
1.270
32.26
.083
2.11
.504
12.80
3/4
1/4
2.112
53.64
1.622
41.20
.625
15.88
1.020
25.91
.094
2.39
.565
14.35
2.112
53.64
1.622
41.20
.625
15.88
1.020
25.91
.094
2.39
.565
14.35
5/16
M8
2.143
54.43
1.643
41.73
.625
15.88
1.082
27.48
.094
2.39
.565
14.35
3/0
150,500–190,000
[76.3–96.3]
2.112
53.64
1.622
41.20
.625
15.88
1.020
25.91
.094
2.39
.565
14.35
3/8
2.143
54.43
1.643
41.73
.625
15.88
1.082
27.48
.094
2.39
.565
14.35
2.112
53.64
1.622
41.20
.625
15.88
1.020
25.91
.094
2.39
.565
14.35
7/16
*Part numbers are available in small quantity packages.
18
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Ring Tongue Terminals (Continued)
Wire Size Range
AWG 3/0 to 300 MCM,
CMA 150,500 to 300,000
[76.3 to 152 mm2]
Material
Terminal Body—Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
B
C
Dimensions
Wire Size
Stud
Material
Thickness
Max.
Wire Barrel I.D. Min.
Solistrand
Part Numbers
Solistrand
Circular Mils
[mm2]
Style
L
Max.
E
Size
C
W
Max.
2.143
1.643
.625
1.082
.094
.565
B
B
C
B
C
B
B
B
B
B
B
B
B
B
C
C
C
B
B
B
B
B
B
01-36929*0
0-321877*0
0-322222-0
01-36930-0
0-322223-0
12-36932-2
0-321271-0
01-36932-0
0-321878*0
0-321879-0
0-321880*0
01-36934*0
0-321163-0
036935
54.43
41.73
15.88
27.48
2.39
14.35
1/2
M12
2.112
53.64
1.622
41.20
.625
15.88
1.020
25.91
.094
2.39
.565
14.35
3/0
2.699
68.55
2.084
52.93
1.125
28.58
1.270
32.26
.094
2.39
.565
14.35
150,500–190,000
[76.3–96.3]
5/8
M16
2.143
54.43
1.643
41.73
.625
15.88
1.082
27.48
.094
2.39
.565
14.35
2.699
68.55
2.084
52.93
1.125
28.58
1.270
32.26
.094
2.39
.565
14.35
3/4
1/4
M6
2.206
56.03
1.644
41.76
.625
15.88
1.150
29.21
.105
2.67
.635
16.13
5/16
M8
2.537
64.44
1.985
50.42
1.078
27.38
1.150
29.21
.105
2.67
.635
16.13
2.206
56.03
1.644
41.76
.625
15.88
1.150
29.21
.105
2.67
.635
16.13
3/8
2.178
55.32
1.657
42.09
.625
15.88
1.087
27.61
.105
2.67
.635
16.13
2.178
55.32
1.657
42.09
.625
15.88
1.087
27.61
.105
2.67
.635
16.13
7/16
2.178
55.32
1.657
42.09
.625
15.88
1.087
27.61
.105
2.67
.635
16.13
4/0
190,000–231,000
[
]
1/2
M12
2.206
56.03
1.644
41.76
.625
15.88
1.150
29.21
.105
2.67
.635
16.13
96.3–117
2.537
64.44
1.985
50.42
1.078
27.38
1.150
29.21
.105
2.67
.635
16.13
2.206
56.03
1.644
41.76
.625
15.88
1.150
29.21
.105
2.67
.635
16.13
5/8
M16
2.732
69.39
2.117
53.77
1.078
27.38
1.275
32.39
.105
2.67
.635
16.13
322227
2.732
69.39
2.117
53.77
1.078
27.38
1.275
32.39
.105
2.67
.635
16.13
3/4
322228
7/8
M22
2.732
69.39
2.117
53.77
1.078
27.38
1.275
32.39
.105
2.67
.635
16.13
321625
2.602
66.09
1.987
50.47
.625
15.88
1.435
36.45
.130
3.30
.753
19.13
3/8
322252
2.602
66.09
1.987
50.47
.625
15.88
1.435
36.45
.130
3.30
.753
19.13
7/16
322253
1/2
2.602
66.09
1.987
50.47
.625
15.88
1.435
36.45
.130
3.30
.753
19.13
322254
250–300 MCM
231,000–300,000
[117–152]
M12
5/8
M16
2.602
66.09
1.987
50.47
.625
15.88
1.435
36.45
.130
3.30
.753
19.13
323050
3.259
82.78
2.566
65.18
1.203
30.56
1.435
36.45
.130
3.30
.753
19.13
3/4
1
323140
3.259
82.78
2.566
65.18
1.203
30.56
1.435
36.45
.130
3.30
.753
19.13
323034
*Part numbers are available in small quantity packages.
19
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Ring Tongue Terminals (Continued)
Wire Size Range
300 to 600 MCM,
CMA 300,000 — 600,000
[152 to 304 mm2]
Material
Terminal Body—Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
B
Dimensions
Wire Size
Stud
Material
Thickness
Max.
Wire Barrel I.D. Min.
Solistrand
Part Numbers
Solistrand
Circular Mils
[mm2]
Style
L
Max.
E
Size
C
W
Max.
2.671
2.056
.625
1.545
.140
.819
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
322257
322763
322258
322259
322764
324105
322428
322262
322263
322264
327882
324202
323222
322939
322267
322772
322269
322773
322270
322271
322273
67.84
52.22
15.88
39.24
3.56
20.80
3/8
3.422
86.92
2.675
67.95
1.250
31.75
1.545
39.24
.140
3.56
.819
20.80
2.671
67.84
2.056
52.22
.625
15.88
1.545
39.24
.140
3.56
.819
20.80
7/16
300–350 MCM
300,000–380,000
[152–193]
2.671
67.84
2.056
52.22
.625
15.88
1.545
39.24
.140
3.56
.819
20.80
1/2
M12
3.422
86.92
2.675
67.95
1.250
31.75
1.545
39.24
.140
3.56
.819
20.80
2.671
67.84
2.065
52.22
.625
15.88
1.545
39.24
.140
3.56
.819
20.80
5/8
3/4
3.422
86.92
2.675
67.95
1.250
31.75
1.545
39.24
.140
3.56
.819
20.80
2.790
70.87
2.175
55.25
.625
15.88
1.749
44.42
.158
4.01
.930
23.62
3/8
2.790
70.87
2.175
55.25
.625
15.88
1.749
44.42
.158
4.01
.930
23.62
7/16
2.790
70.87
2.175
55.25
.625
15.88
1.749
44.42
.158
4.01
.930
23.62
1/2
400 MCM
380,000–478,000
[193–242]
M12
3.644
92.56
2.795
70.99
1.250
31.75
1.749
44.42
.158
4.01
.930
23.62
5/8
M16
2.790
70.87
2.175
55.25
.625
15.88
1.749
44.42
.158
4.01
.930
23.62
3.644
92.56
2.795
70.99
1.250
31.75
1.749
44.42
.158
4.01
.930
23.62
3/4
1
3.644
92.56
2.795
70.99
1.250
31.75
1.749
44.42
.158
4.01
.930
23.62
3.187
80.95
2.447
62.15
.750
19.05
2.015
51.18
.182
4.62
1.075
27.31
3/8
4.176
106.07
3.194
81.13
1.500
38.10
2.015
51.18
.182
4.62
1.075
27.31
3.187
80.95
2.447
62.15
.750
19.05
2.015
51.18
.182
4.62
1.075
27.31
1/2
500–600 MCM
478,000–600,000
[242–304]
M12
4.176
106.07
3.194
81.13
1.500
38.10
2.015
51.18
.182
4.62
1.075
27.31
5/8
M16
3.187
80.95
2.447
62.15
.750
19.05
2.015
51.18
.182
4.62
1.075
27.31
4.176
106.07
3.194
81.13
1.500
38.10
2.015
51.18
.182
4.62
1.075
27.31
3/4
1
4.176
106.07
3.194
81.13
1.500
38.10
2.015
51.18
.182
4.62
1.075
27.31
20
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Right Angle Ring Tongue Terminals
Wire Size Range
AWG 22 to 300 MCM,
CMA 509 — 300,000
[0.26 to 152 mm2]
Material
Terminal Body—Copper per
ASTM B-152
Plating —Tin per MIL-T-10727
Dimensions
Wire Size
Material
Thickness
Max.
Wire
Barrel
ID Min
Stud
Size
Circular Mils
Part Numbers
C
Min.
[mm2]
W
.171
.281
.033
.061
6
10
8
321262
322768
184269
322821
22-16
4.34
7.14
.838
1.55
509-3,260
[0.26-1.65]
.187
4.75
.312
7.92
.033
.838
.061
1.55
.185
4.70
.343
8.71
.050
1.27
.105
2.67
16-14
2,050-5,180
[1.04-2.62]
.192
4.88
.343
8.71
.033
.838
.085
2.16
10
8
.432
10.97
.594
15.09
.051
1.30
.172
4.37
13,100-20,800
[6.64-10.5]
1/4
35277
.390
.625
.060
.232
1/4
5/16
1/4
35678
33466-1
35625
6
9.91
15.88
1.52
5.89
20,800-33,100
[10.5-16.8]
.390
9.91
.625
15.88
.060
1.52
.232
5.89
.375
9.53
.656
16.66
.073
1.85
.296
7.52
4
.348
8.84
.625
15.88
.073
1.85
.280
7.11
33,100-52,600
[16.8-26.7]
5/16
3/8
33115-1
31812-1
.348
8.84
.625
15.88
.073
1.85
.280
7.11
2
.422
10.72
.625
15.88
.073
1.85
.370
9.40
52,600-83,700
[26.7-42.4]
5/16
322870-1
.437
.807
.073
.444
1/4
5/16
3/8
322905
321867-1
322906
322909
36922-1
322912
321874-1
324035
36929-1
321272
321265
11.10
20.50
1.85
11.28
.531
13.49
.807
20.50
.073
1.85
.444
11.28
1/0
83,700-119,500
[42.4-60.6]
.531
13.49
.807
20.50
.073
1.85
.444
11.28
.531
13.49
.875
22.23
.073
1.85
.444
11.28
1/2
.500
12.70
.946
24.03
.083
2.11
.504
12.80
5/16
3/8
2/0
119,500-150,500
[60.6-76.3]
.531
13.49
.926
23.52
.083
2.11
.504
12.80
.531
13.49
1.020
25.91
.094
2.39
.565
14.35
5/16
3/8
3/0
.468
11.89
1.082
27.48
.094
2.39
.565
14.35
150,500-190,000
[76.3-96.3]
.468
11.89
1.062
26.97
.094
2.39
.565
14.35
1/2
.750
19.05
1.150
29.21
.105
2.67
.635
16.13
5/16
3/8
4/0
190,000-231,000
[96.3-117]
.484
12.29
1.140
28.96
.105
2.67
.635
16.13
250-300 MCM
231,000-300,000
[117-152]
.863
21.92
1.435
36.45
.129
3.28
.753
19.13
1/2
324023
21
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Heavy Duty Ring Tongue Terminals
Wire Size Range
AWG 16 to 8,
CMA 2,050 to 20,800
[1.04 to 10.5 mm2]
Material
Terminal Body—Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
C
A
Dimensions
Wire Size
Stud
Material
Thickness
Max.
Wire Barrel I.D. Min.
Part Numbers
Circular Mils
Style
L
Max.
E
Max.
Size
2
C
W
Solistrand
Budget
Solistrand
Budget
33728
33729
33716
33717
33718
34967
33646
34968
33195
34969
33647
33648
34829
34830
36199
36200
36201
—
[
]
mm
.630
.487
.219
.281
.050
.110
4
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
C
C
C
C
—
—
—
—
16.00
12.37
5.56
7.14
1.27
2.79
.630
16.00
.487
12.37
.219
5.56
.281
7.14
.050
1.27
.110
2.79
6
M3.5
.723
18.36
.549
13.94
.281
7.14
.343
8.71
.050
1.27
.105
2.67
.110
2.79
0-
322833-1
8
M4
.723
18.36
.549
13.94
.281
7.14
.343
8.71
.050
1.27
.105
2.67
.110
2.79
10-
35432-1
.723
18.36
.549
13.94
.281
7.14
.343
8.71
.050
1.27
.105
2.67
.110
2.79
10-34567*1
12-34567-1
.865
21.97
.612
15.54
.344
8.74
.500
12.70
.050
1.27
.110
2.79
10
—
—
—
—
.973
24.71
.705
17.91
.437
11.10
.531
13.49
.050
1.27
.110
2.79
.865
21.97
.612
15.54
.344
8.74
.500
12.70
.050
1.27
.105
2.67
.110
2.79
01-35775*1
12-35775-1
1/4
M6
.973
24.71
.705
17.91
.437
11.10
.531
13.49
.050
1.27
.110
2.79
16–14
—
—
2,050–5,180
[1.04–2.62]
.865
21.97
.612
15.54
.344
8.74
.500
12.70
.050
1.27
.105
2.67
.110
2.79
01-
35776-1
5/16
M8
.973
24.71
.705
17.91
.437
11.10
.531
13.49
.050
1.27
.110
2.79
—
—
.973
24.71
.705
17.91
.437
11.10
.531
13.49
.050
1.27
.105
2.67
.110
2.79
0-
322832-1
3/8
1.271
32.28
.893
22.68
.625
15.88
.750
19.05
.050
1.27
.105
2.67
.110
2.79
0-
327732-1
1.271
32.28
.893
22.68
.625
15.88
.750
19.05
.050
1.27
.105
2.67
.110
2.79
0-
321165*1
1/2
M12
1.896
48.16
1.268
32.21
1.000
25.40
1.250
31.75
.050
1.27
.110
2.79
—
—
5/8
M16
1.896
48.16
1.268
32.21
1.000
25.40
1.250
31.75
.050
1.27
.105
2.67
.110
2.79
0-
320758-1
1.896
48.16
1.268
32.21
1.000
25.40
1.250
31.75
.050
1.27
.105
2.67
.110
2.79
0-
3/4
10
320759-1
1.273
32.33
.977
24.82
.443
11.25
.587
14.91
.095
2.41
.177
4.50
0-
—
—
—
—
331414-1
.949
24.10
.696
17.68
.240
6.10
.500
12.70
.095
2.41
.177
4.50
0-
330968-1
—
8
1/4
M6
13,100–20,800
[6.64–10.5]
.933
23.70
.696
17.68
.250
6.35
.468
11.89
.095
2.41
.177
4.50
0-
332042-1
—
5/16
M8
1.273
32.33
.977
24.82
.443
11.25
.587
14.91
.095
2.41
.177
4.50
1-331414-1
—
Note: Part numbers are shown as loose piece over tape mounted product.
*Part numbers are available in small quantity packages.
22
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Heavy Duty Ring Tongue Terminals (Continued)
Wire Size Range
AWG 6 to 1/0,
CMA 20,800 to 119,500
[10.5 to 60.6 mm2]
Material
Terminal Body—Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
B
C
Dimensions
Wire Size
Stud
[mm2]
Material
Thickness
Max.
Wire Barrel I.D. Min.
Solistrand
Part Numbers
Solistrand
Circular Mils
Size
Style
L
Max.
E
C
W
Max.
1.184
.931
.370
.500
.095
.232
10
B
2-330969-1
330969
30.07
23.65
9.40
12.70
2.41
5.89
1.184
30.07
.931
23.65
.370
9.40
.500
12.70
.095
2.41
.232
5.89
B
C
C
B
C
C
C
C
C
B
B
6
1/4
20,800–33,100
M6
1.415
35.94
1.100
27.94
.454
11.53
.625
15.88
.095
2.41
.232
5.89
[
]
10.5–16.8
331417
1.415
35.94
1.100
27.94
.454
11.53
.625
15.88
.095
2.41
.232
5.89
3/8
1-331417-1
330970
1.230
31.24
.977
24.82
.390
9.91
.500
12.70
.095
2.41
.296
7.52
1/4
M6
1.535
38.99
1.193
30.30
.456
11.58
.679
17.25
.095
2.41
.296
7.52
331420
4
33,100–52,600
[16.8–26.7]
5/16
M8
1.535
38.99
1.193
30.30
.456
11.58
.679
17.25
.095
2.41
.296
7.52
1-331420-0
1-331420-1
1-331423-0
1-331423-1
1-331880-0
1-331880-1
1.535
38.99
1.193
30.30
.456
11.58
.679
17.25
.095
2.41
.296
7.52
3/8
3/8
1.745
44.32
1.315
33.40
.639
16.23
.855
21.72
.095
2.41
.375
9.53
2
52,600–83,700
[26.7–42.4]
1/2
M12
1.745
44.32
1.315
33.40
.639
16.23
.855
21.72
.095
2.41
.375
9.53
1.928
48.97
1.519
38.58
.691
17.55
.822
20.88
.095
2.41
.439
11.15
3/8
1/0
83,700–119,500
[42.4–60.6]
1/2
M12
1.928
48.97
1.519
38.58
.691
17.55
.822
20.88
.095
2.41
.439
11.15
23
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Rectangular Tongue Terminals
Wire Size Range
AWG 22 to 14,
CMA 509 to 5,180
[0.26 to 2.62 mm2]
Material
Terminal Body—Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
Dimensions
Wire Size
Stud
Material
Thickness
Max.
Wire Barrel I.D. Min.
Part Numbers
Circular Mils
L
Max.
E
Max.
C
Min.
Size
2
W
X
Solistrand
Budget
Solistrand
Budget
320870
32579
328349
322408
327955
328339
321691
328341
—
[
]
mm
2
.551
.431
.250
.182
.115
.033
.065
—
—
—
M2
14.00
10.95
6.35
4.62
2.92
0.84
1.65
.529
13.44
.384
9.75
.203
5.16
.213
5.41
.140
3.56
.033
0.84
.065
1.65
—
.670
17.02
.517
13.13
.237
6.02
.237
6.02
.143
3.63
.033
0.84
.061
1.55
.065
1.65
328363
323119
—
4
.551
14.00
.431
10.95
.250
6.35
.182
4.62
.115
2.92
.033
0.84
.061
1.55
.065
1.65
.811
20.60
.606
15.39
.404
10.26
.237
6.02
.195
4.95
.033
0.84
.065
1.65
—
22-16
509–3,260
[0.26–1.65]
6
M3.5
.982
24.94
.745
18.92
.465
11.81
.302
7.67
.227
5.77
.033
0.84
.061
1.55
.065
1.65
328353
323112
328355
330539
.670
17.02
.462
11.73
.281
7.14
.312
7.92
.203
5.16
.033
0.84
.061
1.55
.065
1.65
8
M4
.982
24.94
.745
18.92
.465
11.81
.302
7.67
.227
5.77
.033
0.84
.061
1.55
.065
1.65
.748
19.00
.540
13.72
.281
7.14
.312
7.92
.203
5.16
.033
0.84
.061
1.55
—
.670
.462
.281
.375
.203
.033
.061
.065
323106
10
34525
31821
31691
327951
320814
31813
35278
328342
320818
320820
17.02
11.73
7.14
9.53
5.16
0.84
1.55
1.65
2-323106-1
.546
13.87
.399
10.13
.218
5.54
.344
8.74
.142
3.61
.033
0.84
.061
1.55
.065
1.65
34459
—
.576
14.63
.462
11.73
.281
7.14
.215
5.46
.109
2.77
.033
0.84
.089
2.26
4
—
—
5
M3
.632
16.05
.479
12.17
.277
7.04
.277
7.04
.143
3.63
.033
0.84
.089
2.26
—
.560
14.22
.368
9.35
.187
4.75
.250
6.35
.187
4.75
.033
0.84
.085
2.16
.089
2.26
320815
6
M3.5
.529
13.44
.384
9.75
.203
5.16
.296
7.52
.140
3.56
.033
0.84
.085
2.16
.089
2.26
34266
2-34266-1
16–14
2,050–5,180
[1.04–2.62]
.633
16.08
.493
12.52
.312
7.92
.244
6.20
.125
3.18
.033
0.84
.089
2.26
—
—
8
M4
.982
24.94
.745
18.92
.465
11.81
.302
7.67
.227
5.77
.033
0.84
.085
2.16
.089
2.26
328356
320819
—
.717
18.21
.462
11.73
.281
7.14
.312
7.92
.250
6.35
.033
0.84
.085
2.16
.089
2.26
10
12
.951
24.16
.618
15.70
.437
11.10
.375
9.53
.328
8.33
.033
0.84
.089
2.26
—
Note: Part numbers are shown as loose piece over tape mounted product.
24
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Rectangular Tongue Terminals (Continued)
Wire Size Range
AWG 12 to 10,
CMA 5,180 to 13,100
[2.62 to 6.64 mm2]
Material
Terminal Body — Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
Dimensions
Wire Size
Stud
Material
Thickness
Max.
Wire Barrel I.D. Min.
Part Numbers
Circular Mils
L
E
C
Min.
Size
2
W
X
Solistrand
Budget
Solistrand
328050
—
Budget
327971
327953
33426
[
]
mm
Max.
Max.
.679
17.25
.526
13.36
.237
6.02
.237
6.02
.143
3.63
.042
1.07
.129
3.28
.134
3.40
4
5
M3
.719
18.26
.566
14.38
.277
7.04
.277
7.04
.143
3.63
.042
1.07
.134
3.40
—
.631
16.03
.486
12.34
.218
5.54
.290
7.37
.140
3.56
.042
1.07
.129
3.28
.134
3.40
321499
2-321499-1
6
.898
.693
.404
.237
.195
.042
.134
—
—
327959
322945
331269
321557
320822
12–10
5,180–13,100
[2.62–6.64]
M3.5
22.81
17.60
10.26
6.02
4.95
1.07
3.40
1.006
25.55
.736
18.69
.468
11.89
.296
7.52
.265
6.73
.042
1.07
.129
3.28
.134
3.40
322946
—
8
M4
.924
23.47
.754
19.15
.465
11.81
.302
7.67
.160
4.06
.042
1.07
.134
3.40
—
.843
21.41
.588
14.94
.320
8.13
.312
7.92
.250
6.35
.042
1.07
.129
3.28
.134
3.40
321558
320823
10
1/4
M6
1.069
27.15
.736
18.69
.468
11.89
.469
11.91
.328
8.33
.042
1.07
.129
3.28
.134
3.40
Note: Part numbers are shown as loose piece over tape mounted product.
25
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Spade Tongue Terminals
Wire Size Range
AWG 26 to 10,
CMA 202 to 13,100
[0.1 to 6.64 mm2]
Material
Terminal Body—Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
Dimensions
Wire Size
Stud
Material
Thickness
Max.
Wire Barrel I.D. Min.
Part Numbers
Circular Mils
L
Max.
E
Max.
C
Min.
Size
2
W
X
Solistrand
Budget
Solistrand
Budget
32501
34247
328395
323834
31634
33765
34518*
31635*
323823
34582
31636*
31704
33202*
33221
31705*
35116
31442
31706
—
[
]
mm
.280
.213
.078
.125
.062
.020
.035
0
4
—
—
—
—
26–22
7.11
5.41
1.98
3.18
1.57
0.51
0.89
202–810
[0.1–0.41]
.431
10.95
.346
8.79
.211
5.36
.203
5.16
.076
1.93
.020
0.51
.035
0.89
2
M2
.504
12.80
.384
9.75
.203
5.16
.182
4.62
.115
2.92
.033
0.84
.061
1.55
.065
1.65
2-53555-1*
2-53555-2*
.451
11.46
.337
8.56
.156
3.96
.218
5.54
.109
2.77
.033
0.84
.061
1.55
.065
1.65
321463
2-321463-1
4
.685
17.40
.493
12.52
.312
7.92
.375
9.53
.187
4.75
.033
0.84
.065
1.65
—
—
6
M3.5
.530
13.46
.384
9.75
.203
5.16
.297
7.54
.141
3.58
.033
0.84
.061
1.55
.065
1.65
36195*
2-36195-3*
22–16
509–3,260
[0.26–1.65]
.623
15.82
.493
12.52
.312
7.92
.250
6.35
.125
3.18
.033
0.84
.061
1.55
.065
1.65
323127*
.685
17.40
.493
12.52
.312
7.92
.375
9.53
.187
4.75
.033
0.84
.061
1.55
.065
1.65
34117*
2-34117-2*
8
M4
.653
16.59
.477
12.12
.296
7.52
.343
8.71
.171
4.34
.033
0.84
.065
1.65
—
—
.733
18.62
.572
14.53
.312
7.92
.344
8.74
.156
3.96
.033
0.84
.061
1.55
—
34583
10
.685
17.40
.493
12.52
.312
7.92
.375
9.53
.187
4.75
.033
0.84
.061
1.55
.065
1.65
34118*
2-34118-2*
.685
17.40
.493
12.52
.312
7.92
.385
9.78
.187
4.75
.033
0.84
.089
2.26
—
—
6
M3.5
.530
13.46
.384
9.75
.203
5.16
.297
7.54
.141
3.58
.033
0.84
.085
2.16
.089
2.26
2-322996*1
2-322996-1
.623
15.82
.493
12.52
.312
7.92
.244
6.20
.125
3.18
.033
0.84
.085
2.16
.089
2.26
330827
34128*
.685
17.40
.493
12.52
.312
7.92
.385
9.78
.187
4.75
.033
0.84
.085
2.16
.089
2.26
16–14
2,050–5,180
[1.04–2.62]
8
M4
.530
13.46
.384
9.75
.203
5.16
.297
7.54
.141
3.58
.033
0.84
.085
2.16
.089
2.26
36880
2-36880-1
.764
19.41
.572
14.53
.312
7.92
.385
9.78
.187
4.75
.033
0.84
.085
2.16
.089
2.26
33219*
34129*
324521
—
.685
17.40
.493
12.52
.312
7.92
.385
9.78
.187
4.75
.033
0.84
.085
2.16
.089
2.26
10
.733
18.62
.572
14.53
.312
7.92
.344
8.74
.156
3.96
.033
0.84
.085
2.16
—
.772
19.61
.564
14.33
.296
7.52
.406
10.31
.203
5.16
.042
1.07
.134
3.40
—
31587
34384
35493
325195
31588*
31589
35494*
6
M3.5
.631
16.03
.486
12.34
.218
5.54
.282
7.16
.140
3.56
.042
1.07
.129
3.28
.134
3.40
322451*
—
.772
19.61
.564
14.33
.296
7.52
.312
7.92
.203
5.16
.042
1.07
.134
3.40
—
12–10
5,180–13,100
[2.62–6.64]
.991
25.17
.757
19.23
.468
11.89
.312
7.92
.250
6.35
.042
1.07
.129
3.28
.134
3.40
325196
32995*
8
M4
.772
19.61
.564
14.33
.296
7.52
.406
10.31
.203
5.16
.042
1.07
.129
3.28
.134
3.40
.772
19.61
.564
14.33
.296
7.52
.406
10.31
.203
5.16
.042
1.07
.129
3.28
.134
3.40
33479*
2-33479-1*
10
.772
19.61
.564
14.33
.296
7.52
.375
9.53
.203
5.16
.042
1.07
.129
3.28
.134
3.40
35495*
2-35495-2*
Note: Part numbers are shown as loose piece over tape mounted product.
*Part numbers are available in small quantity packages.
26
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Short Spring Spade Tongue Terminals
Wire Size Range
AWG 26 to 16,
CMA 202 to 3,260
[0.1 to 1.65 mm2]
Material
Terminal Body—Phosphor Bronze
per ASTM B-103
Plating — Tin per MIL-T-10727
Dimensions
Wire Size
Stud
Material
Thickness
Max.
Wire Barrel I.D. Min.
Part Numbers
Circular Mils
L
Max.
E
Max.
C
Min.
Size
2
W
X
Solistrand
Budget
Solistrand
Budget
53000-1
53001-1
53002-1
53003-1
53004-1
53150-2
53005-1
53006-1
53266-2
53007-1
53267-2
53268-2
53235-2
[
]
mm
2
.455
.341
.206
.171
.109
.020
.034
—
—
—
—
—
—
M2
11.56
8.66
5.23
4.34
2.77
0.51
0.86
.499
12.67
.354
8.99
.219
5.56
.203
5.16
.140
3.56
.020
0.51
.034
0.86
4
—
26–22
5
M3
.483
12.27
.338
8.59
.203
5.16
.250
6.35
.140
3.56
.020
0.51
.034
0.86
202–810
[0.1–0.41]
—
—
6
M3.5
.483
12.27
.338
8.59
.203
5.16
.250
6.35
.140
3.56
.020
0.51
.034
0.86
8
M4
.591
15.01
.416
10.57
.281
7.14
.375
9.53
.170
4.32
.020
0.51
.034
0.86
—
.576
14.63
.431
10.95
.250
6.35
.203
5.16
.140
3.56
.033
0.84
.061
1.55
.065
1.65
4
53175-1*
—
5
M3
.576
14.63
.431
10.95
.250
6.35
.250
6.35
.140
3.56
.033
0.84
.065
1.65
—
.576
14.63
.431
10.95
.250
6.35
.250
6.35
.140
3.56
.033
0.84
.061
1.55
.065
1.65
53120-1*
53120-2*
6
M3.5
.576
14.63
.431
10.95
.250
6.35
.234
5.94
.140
3.56
.033
0.84
.061
1.55
.065
1.65
53830-1*
53830-2*
22–16
509–3,260
[0.26–1.65]
.637
16.18
.462
11.73
.281
7.14
.375
9.53
.170
4.32
.033
0.84
.061
1.55
.065
1.65
53121-1*
8
M4
.637
16.18
.462
11.73
.281
7.14
.244
6.20
.170
4.32
.033
0.84
.061
1.55
.065
1.65
53831-1*
53831-2*
.685
17.40
.462
11.73
.281
7.14
.294
7.47
.218
5.54
.033
0.84
.061
1.55
.065
1.65
53832-1*
53832-2*
10
1/4-28 UNF .810
M6 20.57
.524
13.31
.343
8.71
.625
15.88
.281
7.14
.033
0.84
.065
1.65
—
—
Note: Part numbers are shown as loose piece over tape mounted product.
*Part numbers are available in small quantity packages.
27
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Short Spring Spade Tongue Terminals (Continued)
Wire Size Range
AWG 16 to 10,
CMA 2,050 to 13,100
[1.04 to 6.64 mm2]
Material
Terminal Body—Phosphor Bronze
per ASTM B-103
Plating — Tin per MIL-T-10727
Dimensions
Wire Size
Stud
Material
Thickness
Max.
Wire Barrel I.D. Min.
Part Numbers
Circular Mils
L
Max.
E
Max.
C
Min.
Size
2
W
X
Solistrand
Budget
Solistrand
Budget
53009-1
53010-1
53011-1
53270-2
53012-1
53271-2
53032-1
53013-1
53014-1
53015-1
53273-2
53016-1
53274-2
53226-2
[
]
mm
5
.576
.431
.250
.250
.140
.033
.085
.089
53177-1*
M3
14.63
10.95
6.35
6.35
3.56
0.84
2.16
2.26
6
M3.5
.576
14.63
.431
10.95
.250
6.35
.250
6.35
.140
3.56
.033
0.84
.085
2.16
.089
2.26
53123-1*
53123-2*
.637
16.18
.462
11.73
.281
7.14
.375
9.53
.170
4.32
.033
0.84
.085
2.16
.089
2.26
53124-1*
53124-2*
16–14
8
M4
2,050–5,180
[
]
.637
16.18
.462
11.73
.281
7.14
.244
6.20
.170
4.32
.033
0.84
.085
2.16
.089
2.26
53833-1*
53833-2*
1.04–2.62
.685
17.40
.462
11.73
.281
7.14
.406
10.31
.218
5.54
.033
0.84
.085
2.16
.089
2.26
53125-1*
53125-2*
10
.685
17.40
.462
11.73
.281
7.14
.294
7.47
.218
5.54
.033
0.84
.085
2.16
.089
2.26
53834-1*
53834-2*
1/4-28 UNF .810
.524
13.31
.343
8.71
.625
15.88
.281
7.14
.033
0.84
.089
2.26
—
—
—
—
M6
20.57
5
M3
.636
16.15
.447
11.35
.169
4.29
.250
6.35
.184
4.67
.042
1.07
.134
3.40
6
M3.5
.636
16.15
.452
11.48
.174
4.42
.250
6.35
.179
4.55
.042
1.07
.129
3.28
.134
3.40
53126-1*
53126-2*
.729
18.52
.554
14.07
.276
7.01
.375
9.53
.170
4.32
.042
1.07
.129
3.28
.134
3.40
53127-1*
53127-2*
8
M4
12–10
5,180–13,100
[2.62–6.64]
.729
18.52
.554
14.07
.276
7.01
.312
7.92
.170
4.32
.042
1.07
.129
3.28
.134
3.40
53835-1*
53835-2*
.777
19.74
.554
14.07
.276
7.01
.406
10.31
.218
5.54
.042
1.07
.129
3.28
.134
3.40
53128-1*
53128-2*
10
.777
19.74
.554
14.07
.276
7.01
.312
7.92
.218
5.54
.042
1.07
.129
3.28
.134
3.40
53836-1*
53836-2*
1/4-28 UNF .902
M6 22.91
.616
15.65
.338
8.59
.375
9.53
.281
7.14
.042
1.07
—
.134
3.40
—
Note: Part numbers are shown as loose piece over tape mounted product.
*Part numbers are available in small quantity packages.
28
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Long Spring Spade Tongue Terminals
Wire Size Range
AWG 26 to 10,
CMA 202 to 13,100
[0.1 to 6.64 mm2]
Material
Terminal Body—Phosphor Bronze
per ASTM B-103
Plating — Tin per MIL-T-10727
Dimensions
Wire Size
Stud
Material
Thickness
Max.
Wire Barrel I.D. Min.
Part Numbers
Circular Mils
L
Max.
E
Max.
C
Min.
Size
2
W
X
Solistrand
Budget
Solistrand
Budget
52733-1
52734-1
52735-1
53047-1
52700-1
52701-1
52702-1
53111-2
52703-1
[
]
mm
.637
.341
.206
.203
.276
.020
.034
4
—
—
—
—
—
—
16.18
8.66
5.23
5.16
7.01
0.51
0.86
26–22
202–810
0.1–0.41
6
M3.5
.666
16.92
.370
9.40
.235
5.97
.250
6.35
.276
7.01
.020
0.51
.034
0.86
[
]
8
M4
.696
17.68
.400
10.16
.265
6.73
.281
7.14
.290
7.37
.020
0.51
.034
0.86
—
.673
17.09
.392
9.96
.201
5.11
.203
5.16
.276
7.01
.033
0.84
.065
1.65
4
—
6
M3.5
.709
18.01
.429
10.90
.238
6.05
.250
6.35
.276
7.01
.033
0.84
.061
1.55
.065
1.65
52709-1*
22–16
8
M4
.756
19.20
.461
11.71
.270
6.86
.281
7.14
.290
7.37
.033
0.84
.061
1.55
.065
1.65
52710-1*
52710-2*
509–3,260
[
]
0.26–1.65
.782
19.86
.474
12.04
.283
7.19
.343
8.71
.303
7.70
.033
0.84
.065
1.65
10
—
—
—
—
1/4-28 UNF .879
.536
13.61
.340
8.64
.437
11.10
.333
8.46
.033
0.84
.065
1.65
M6
22.33
6
M3.5
.709
18.01
.429
10.90
.238
6.05
.250
6.35
.276
7.01
.033
0.84
.085
2.16
.089
2.26
52712-1*
8
.756
.461
.270
.281
.290
.033
.085
.089
52713-1*
52713-2*
52704-1
52704-3
16–14
2,050–5,180
[1.04–2.62]
M4
19.20
11.71
6.86
7.14
7.37
0.84
2.16
2.26
.782
19.86
.474
12.04
.283
7.19
.343
8.71
.303
7.70
.033
0.84
.085
2.16
.089
2.26
10
52714-1*
—
52705-1
53033-1
52706-1
1/4-28 UNF .879
.536
13.61
.345
8.76
.437
11.10
.338
8.59
.033
0.84
.089
2.26
—
M6
22.33
6
M3.5
.808
20.52
.520
13.21
.242
6.15
.312
7.92
.283
7.19
.042
1.07
.129
3.28
.134
3.40
*
52715-1
8
.851
.551
.273
.375
.295
.042
.129
.134
52716-1*
52716-2*
52707-1
52707-3
12–10
5,180–13,100
[2.62–6.64]
M4
21.62
14.00
6.93
9.53
7.49
1.07
3.28
3.40
.896
22.76
.583
14.81
.305
7.75
.375
9.53
.308
7.82
.042
1.07
.129
3.28
.134
3.40
52717-1*
52717-2*
10
52708-1
52772-1
1/4-28 UNF .966
M6 24.54
.623
15.82
.345
8.76
.437
11.10
.338
8.59
.042
1.07
.134
3.40
—
—
Note: Part numbers are shown as loose piece over tape mounted product.
*Part numbers are available in small quantity packages.
29
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Flanged Spade Tongue Terminals
Wire Size Range
AWG 26 to 10,
CMA 202 to 13,100
[0.1 to 6.64 mm2]
Material
Terminal Body—Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
Dimensions
Wire Size
Stud
Material
Thickness
Max.
Wire Barrel I.D. Min.
Solistrand Budget
Part Numbers
Circular Mils
L
Max.
E
Max.
C
H
Min.
Size
2
W
X
Solistrand
Budget
[
]
mm
Min.
2
.453
.338
.203
.182
.110
.026
.020
.035
1
324599-1
—
—
—
M2
11.51
8.59
5.16
4.62
2.79
0.66
0.51
0.89
26–22
202–810
[0.1–0.41]
.453
11.51
.338
8.59
.203
5.16
.193
4.90
.110
2.79
.026
0.66
.020
0.51
.035
0.89
1-
1-
1
4
52512-1
51875-1
—
6
M3.5
.453
11.51
.338
8.59
.203
5.16
.250
6.35
.110
2.79
.026
0.66
.020
0.51
.035
0.89
—
—
2-
2
M2
.504
12.80
.384
9.75
.203
5.16
.182
4.62
.115
2.92
.041
1.04
.033
0.84
.061
1.55
.065
1.65
324605*1 324604-1
.514
13.06
.384
9.75
.203
5.16
.296
7.52
.125
3.18
.045
1.14
.033
0.84
.061
1.55
.065
1.65
2-320749*1 1-
32418-1
2-320749-2
6
M3.5
.514
.384
.203
.250
.125
.045
.033
.061
.065
2-323136*1
2-323136-1
1
322776-1
1-
22–16
509–3,260
[0.26–1.65]
13.06
9.75
5.16
6.35
3.18
1.14
0.84
1.55
1.65
.607
15.42
.431
10.95
.250
6.35
.416
10.57
.171
4.34
.062
1.57
.033
0.84
.061
1.55
.065
1.65
2-
323124*1
32494-1
8
M4
.514
13.06
.384
9.75
.203
5.16
.296
7.52
.125
3.18
.045
1.14
.033
0.84
.061
1.55
.065
1.65
2-52730*1 1-32418-2
2-52730-1 1-32418-4
.514
.384
.203
.296
.125
.045
.033
.065
1
10
328522-1
320852-1
320853-1
320854-1
324579-1
—
—
13.06
9.75
5.16
7.52
3.18
1.14
0.84
1.65
6
M3.5
.514
13.06
.384
9.75
.203
5.16
.294
7.47
.125
3.18
.047
1.19
.033
0.84
.085
2.16
.089
2.26
2-320855*1
2-320855-1
1
1
1
1
16–14
2,050–5,180
[1.04–2.62]
8
M4
.514
13.06
.384
9.75
.203
5.16
.294
7.47
.125
3.18
.047
1.19
.033
0.84
.085
2.16
.089
2.26
2-320856*1
2-320856-1
.514
13.06
.384
9.75
.203
5.16
.294
7.47
.125
3.18
.047
1.19
.033
0.84
.085
2.16
.089
2.26
2-320857*1
2-320857-1
10
6
M3.5
.694
17.63
.518
13.16
.250
6.35
.296
7.52
.171
4.34
.052
1.32
.042
1.07
.129
3.28
.134
3.40
2-324578-0
1-324578-0
12-10
5,180–13,100
[2.62–6.64]
8
.694
.518
.250
.416
.171
.052
.042
.129
.134
2-
1-
323143-0
32416-1
M4
17.63
13.16
6.35
10.57
4.34
1.32
1.07
3.28
3.40
.694
17.63
.518
13.16
.250
6.35
.416
10.57
.171
4.34
.052
1.32
.042
1.07
.129
3.28
.134
3.40
2-323144-0
2-323144-1
1
10
322725-1
Note: Part numbers are shown as loose piece over tape mounted product.
*Part numbers are available in small quantity packages.
30
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Slotted Ring Tongue Terminals
Wire Size Range
AWG 26 to 10,
CMA 202 to 13,100
[0.1 to 6.64 mm2]
Material
Terminal Body—Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
Dimensions
Wire Size
Stud
Material
Thickness
Max.
Wire Barrel I.D. Min.
Part Numbers
Circular Mils
L
Max.
E
C
Min.
Size
2
W
Solistrand
Budget
Solistrand
Budget
[
]
mm
Max.
26–22
6
M3.5
.523
13.28
.416
10.57
.281
7.14
.250
6.35
.020
0.51
.035
0.89
202–810
—
—
322211-0
[
]
0.1–0.41
.425
.353
.172
.182
.033
.061
.065
2-
4
321288*0
323838-0
323835-0
36953-0
323832-0
323837-0
35555-0
34520-0
328872-0
36216-0
10.80
8.97
4.37
4.62
0.84
1.55
1.65
6
M3.5
.423
10.74
.337
8.56
.156
3.96
.218
5.54
.033
0.84
.061
1.55
.065
1.65
2-321289-0
2-321289-1
22–16
509–3,260
[0.26–1.65]
.547
13.89
.431
10.95
.250
6.35
.281
7.14
.033
0.84
.061
1.55
.065
1.65
2-
8
323129-0
.588
14.94
.462
11.73
.281
7.14
.312
7.92
.033
0.84
.065
1.65
10
1/4
—
—
.816
20.73
.618
15.70
.437
11.10
.469
11.91
.033
0.84
.061
1.55
.065
1.65
2-321809-0
2-321809-1
6
M3.5
.459
11.66
.352
8.94
.171
4.34
.250
6.35
.033
0.84
.085
2.16
.089
2.26
2-
322514-0
8
M4
.616
15.65
.462
11.73
.281
7.14
.344
8.74
.033
0.84
.089
2.26
—
—
—
—
—
—
16–14
2,050–5,180
[
]
.604
15.34
.462
11.73
.281
7.14
.343
8.71
.033
0.84
.089
2.26
1.04–2.62
10
1/4
M6
.816
20.73
.618
15.70
.437
11.10
.469
11.91
.033
0.84
.089
2.26
21-
12–10
5,180–13,100
1/4
M6
.952
24.18
.736
18.69
.468
11.89
.531
13.49
.042
1.07
.129
3.28
.134
3.40
35680*0
55812-2
[
]
2.62–6.64
Note: Part numbers are shown as loose piece over tape mounted product.
*Part numbers are available in small quantity packages.
31
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Hook Tongue Terminals
Wire Size Range
AWG 22 to 10,
CMA 509 to 13,100
[0.26 to 6.64 mm2]
Material
Terminal Body— Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
Dimensions
Wire Size
Stud
Material
Thickness
Max.
Wire Barrel I.D. Min.
Part Numbers
Circular Mils
L
Max.
E
C
Min.
Size
2
W
Solistrand
Budget
Solistrand
Budget
34261
31628
35212
32503
33437
327902
327905
[
]
mm
Max.
6
.530
.384
.203
.281
.033
.065
—
—
—
—
—
—
—
—
—
—
22–16
M3.5
13.46
9.75
5.16
7.14
0.84
1.65
509–3,260
[0.26–1.65]
8
M4
.656
16.66
.482
12.24
.296
7.52
.343
8.71
.033
0.84
.065
1.65
6
M3.5
.636
16.15
.462
11.73
.281
7.14
.343
8.71
.033
0.84
.089
2.26
16–14
8
M4
.636
16.15
.462
11.73
.281
7.14
.343
8.71
.033
0.84
.089
2.26
2,050–5,180
[
]
1.04–2.62
.636
16.15
.462
11.73
.281
7.14
.343
8.71
.033
0.84
.089
2.26
10
10
.760
19.30
.570
14.48
.302
7.67
.375
9.53
.042
1.07
.129
3.28
.134
3.40
2-324209-0
2-324209-1
12–10
5,180–13,100
[2.62–6.64]
1/4
M6
1.004
25.50
.736
18.69
.468
11.89
.531
13.49
.042
1.07
.129
3.28
.134
3.40
2-321632-0
2-321632-1
Note: Part numbers are shown as loose piece over tape mounted product.
Tab Tongue Terminals
Wire Size Range
AWG 22 to 8,
CMA 509 to 20,800
[0.26 to 10.5 mm2]
Material
Terminal Body— Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
A
B
Dimensions
Wire Size
Material
Thickness
Max.
Wire Barrel I.D. Min.
Solistrand
Part Numbers
Solistrand
Circular Mils
Style
L
Max.
E
Max.
2
W
[
]
mm
22–16
.681
.500
.125
.033
.061
509–3,260
[0.26–1.65]
A
B
B
B
323135
322441
322443
322445
17.30
12.70
3.18
0.84
1.55
16–14 HD1
2,050–5,180
[1.04–2.62]
.863
21.92
.615
15.62
.125
3.18
.050
1.27
.105
2.67
12–10
5,180–13,100
[2.62–6.64]
.863
21.92
.613
15.57
.125
3.18
.042
1.07
.129
3.28
8
.937
23.80
.625
15.88
.221
5.61
.051
1.30
.177
4.50
13,100–20,800
[6.64–10.5]
1Heavy Duty for extra mechanical strength.
32
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Flag Ring Tongue Terminals
Wire Size Range
AWG 16 to 2,
CMA 2,050 to 83,700
[1.04 to 42.4 mm2]
Material
Terminal Body—Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
A
B
Dimensions
Wire Size
Material
Thickness
Max.
Stud
Size
Wire Barrel I.D. Min.
Solistrand
Part Numbers
Solistrand
Circular Mils
Style
L
Max.
C
Min.
2
W
[
]
mm
8
.579
.250
.312
.033
.085
16–14
A
A
A
A
A
A
B
B
B
A
A
B
B
A
A
B
B
B
B
B
B
B
325069*1
322819*1
36269*1
M4
14.71
6.35
7.92
0.84
2.16
2,050–5,180
[1.04–2.62]
.579
14.71
.250
6.35
.312
7.92
.033
.084
.085
2.16
10
6
M3.5
.702
17.83
.281
7.14
.375
9.53
.042
1.07
.129
3.28
8
M4
.702
17.83
.281
7.14
.375
9.53
.042
1.07
.129
3.28
36270*1
12–10
5,180–13,100
[2.62–6.64]
.702
17.83
.281
7.14
.375
9.53
.042
1.07
.129
3.28
10
36271*1
1/4
M6
.702
17.83
.281
7.14
.375
9.53
.042
1.07
.129
3.28
36272*1
.791
20.09
.250
6.35
.500
12.70
.043
1.09
.180
4.57
321051*1
321441*1
322727*1
323196*1
321576*1
321056*1
322204*1
321059*1
321275*1
321060*1
321121*1
321063*1
321201*1
321064*1
321253*1
184147-1
10
8
.918
23.32
.378
9.60
.500
12.70
.043
1.09
.180
4.57
13,100–20,800
[6.64–10.5]
1/4
M6
1.130
28.70
.525
13.34
.609
15.47
.043
1.09
.180
4.57
.841
21.36
.250
6.35
.500
12.70
.048
1.22
.224
5.69
10
1/4
M6
.960
24.38
.371
9.42
.500
12.70
.048
1.22
.224
5.69
6
20,800–33,100
[10.5–16.8]
5/16
M8
1.200
30.48
.528
13.41
.625
15.88
.048
1.22
.224
5.69
1.200
30.48
.528
13.41
.625
15.88
.048
1.22
.224
5.69
3/8
10
1.048
26.62
.368
9.35
.546
13.87
.051
1.30
.280
7.11
1/4
M6
1.048
26.62
.368
9.35
.546
13.87
.051
1.30
.280
7.11
4
33,100–52,600
[16.8–26.7]
5/16
M8
1.278
32.46
.530
13.46
.682
17.32
.051
1.30
.280
7.11
1.278
32.46
.530
13.46
.682
17.32
.051
1.30
.280
7.11
3/8
10
1.437
36.50
.534
13.56
.713
18.11
.060
1.52
.357
9.07
1/4
M6
1.437
36.50
.534
13.56
.713
18.11
.060
1.52
.357
9.07
2
5/16
M8
1.437
36.50
.534
13.56
.713
18.11
.060
1.52
.357
9.07
52,600–83,700
[26.7–42.4]
1.437
36.50
.534
13.56
.713
18.11
.060
1.52
.357
9.07
3/8
1.437
36.50
.534
13.56
.713
18.11
.060
1.52
.357
9.07
10 mm
*Part numbers are available in small quantity packages.
33
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Flag Ring Tongue Terminals (Continued)
Wire Size Range
AWG 1/0 to 4/0,
CMA 83,700 to 231,000
[42.4 to 117 mm2]
Material
Terminal Body—Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
A
Dimensions
Wire Size
Material
Thickness
Max.
Stud
Size
Wire Barrel I.D. Min.
Solistrand
Part Numbers
Solistrand
Circular Mils
Style
L
Max.
C
Min.
2
W
[
]
mm
1/4
M6
1.733
.666
.875
.073
.444
A
A
A
A
A
A
322215-1
321580-1
321066-1
321123-1
321582-1
321584-1
44.02
16.92
22.23
1.85
11.28
5/16
M8
1.733
44.02
.666
16.92
.875
22.23
.073
1.85
.444
11.28
1/0
83,700–119,500
[
]
1.733
44.02
.666
16.92
.875
22.23
.073
1.85
.444
11.28
42.4–60.6
3/8
1/2
M12
1.733
44.02
.666
16.92
.875
22.23
.073
1.85
.444
11.28
5/16
M8
1.848
46.94
.671
17.04
.920
23.37
.083
2.11
.504
12.80
2/0
119,500–150,500
[60.6–76.3]
1.848
46.94
.671
17.04
.920
23.37
.083
2.11
.504
12.80
3/8
3/0
2.001
50.83
.676
17.17
1.056
26.82
.094
2.39
.565
14.35
150,500–190,000
[76.3–96.3]
3/8
A
327887-1
5/16
M8
2.131
.681
1.115
.105
.635
A
A
A
321277-1
321277-1
321259-1
54.13
17.30
28.32
2.67
16.13
4/0
2.131
54.13
.681
17.30
1.115
28.32
.105
2.67
.635
16.13
190,000-231,000
3/8
[
]
96.3–117
1/2
M12
2.131
54.13
.681
17.30
1.115
28.32
.105
2.67
.635
16.13
34
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Parallel Splices
Wire Size Range
AWG 22 to 600 MCM,
CMA 509 to 600,000
[0.26 to 304 mm2]
Material
Splice Body—Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
Dimensions
Wire Size
Material
Thickness
Max.
Part Numbers
Solistrand
Circular Mils1
L
Max.
I.D.
Min.
O.D.
Max.
2
[
]
mm
22–16
.301
.061
.141
.033
34130*
34137*
509–3,260
[0.26–1.65]
7.65
1.55
3.58
0.84
16–14
2,050–5,180
[1.04–2.62]
.301
7.65
.085
2.16
.165
4.19
.033
0.84
12–10
.343
.129
.226
.042
5,180–13,100
[2.62–6.64]
34138*
34318*
34319*
8.71
3.28
5.74
1.07
8
.375
9.53
.172
4.37
.296
7.52
.051
1.30
13,100–20,800
[6.64–10.5]
6
.437
11.10
.232
5.89
.369
9.37
.060
1.52
20,800–33,100
[
]
10.5–16.8
4
.531
13.49
.296
7.52
.463
11.76
.073
1.85
33,100–52,600
34320*
35187*
[
]
16.8–26.7
2
.640
16.26
.370
9.40
.539
13.69
.073
1.85
52,600–83,700
[
]
26.7–42.4
1/0
.734
.444
.613
.073
36946*
36948*
36909*
83,700–119,500
18.64
11.28
15.57
1.85
[
]
42.4–60.6
2/0
.734
18.64
.504
12.80
.703
17.86
.083
2.11
119,500–150,500
[
]
60.6–76.3
3/0
150,500–190,000
.749
19.02
.565
14.35
.775
19.69
.094
2.39
[
]
76.3–96.3
4/0
190,000–231,000
.765
19.43
.635
16.13
.869
22.07
.105
2.67
36951*
322275*
322276*
322277*
322278*
[
]
96.3–117
250–300 MCM
1.062
26.97
.753
19.13
1.054
26.77
.130
3.30
231,000–300,000
[
]
117–152
300–350 MCM
1.124
28.55
.819
20.80
1.137
28.88
.140
3.56
300,000–380,000
[
]
152–193
400 MCM
1.249
31.72
.925
23.50
1.287
32.69
.158
4.01
380,000–478,000
[
]
193–242
500–600 MCM
1.421
36.09
1.070
27.18
1.483
37.67
.182
4.62
478,000–600,000
[
]
242–304
*Part numbers are available in small quantity packages.
1When terminating two or more wires in a parallel splice, the combined cross sectional area must be within the listed circular mil area range (CMA).
35
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Butt Splices
Wire Size Range
AWG 26 to 2,
CMA 202 to 83,700
[0.1 to 42.4 mm2]
Material
Splice Body—Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
Standard
Sight Hole
Strap
Solistrand
Budget
Dimensions
Wire Size
Material
Thickness
Max.
Dimensions
Part Numbers
Circular Mils1
[mm2]
Style
L
Max.
I.D.
Min.
O.D.
Max.
L
Max.
I.D.
Min.
O.D.
Max.
Solistrand
Budget
26–22
1
.385
.031
.082
.385
.034
.077
.020
-0
202–810
[0.1–0.41]
Strap
Strap
321198*1
321024
9.78
0.79
2.08
9.78
0.86
1.96
0.51
24–20
320–1,290
[0.16–0.65]
--
.490
12.45
.043
1.09
.105
2.67
.025
0.64
324001*1
—
—
—
—
.591
.061
.141
.591
.065
.136
.033
2-321801-3
2-321801-4
Strap
21-32463-0
21-34226*0
—
15.01
1.55
3.58
15.01
1.65
3.45
0.84
22–16
509–3,260
[0.26–1.65]
.578
14.68
.061
1.55
.141
3.58
.578
14.68
.065
1.65
.136
3.45
.033
0.84
2131818*1
-2-31818-1
Standard
Sight
Hole
.578
14.68
.061
1.55
.141
3.58
.033
0.84
1
—
—
—
330367*1
.591
.085
.165
.591
.089
.160
.033
1
Strap
Standard
Strap
322459-1 21-32464-0
15.01
2.16
4.19
15.01
2.26
4.06
0.84
.567
14.40
.085
2.16
.165
4.19
.567
14.40
.089
2.26
.160
4.06
.033
0.84
2131819*1
21-34227*0
2-31819-1
16–14
2,050–5,180
[1.04–2.62]
.591
15.01
.085
2.16
.165
4.19
.033
0.84
1327025*1
—
—
—
—
—
—
—
(No Wire Stop)
Sight
Hole
.567
14.40
.085
2.16
.165
4.19
.033
0.84
1
330368*1
321280-1
—
—
14–12
3,260–8,230
[1.65–4.17]
1
Sight
Hole
.690
17.53
.098
2.49
.178
4.52
.033
0.84
—
—
—
.703
.134
.221
.042
Strap
—
—
—
—
21-30953-0
—
17.86
3.40
5.61
1.07
Sight
Hole
.567
14.40
.129
3.28
.226
5.74
.042
1.07
1
12–10
—
—
—
330369*1
5,180–13,100
2.62–6.64
[
]
.565
.129
.226
.565
.134
.221
.042
21-
1
Standard
Strap
32151*1 21-34228*0
14.35
3.28
5.74
14.35
3.40
5.61
1.07
.765
19.43
.129
3.28
.226
5.74
.765
19.43
.134
3.40
.221
5.61
.042
1.07
324893-1 1-324898-0
.827
.172
.296
.051
21-
21
8
Standard
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
34321*1
—
—
—
—
—
—
—
—
21.01
4.37
7.52
1.30
13,100–20,800
[6.64–10.5]
Sight
Hole
.827
21.01
.172
4.37
.296
7.52
.051
1.30
36906*1
34322*1
36886*1
34323*1
1.015
25.78
.232
5.89
.369
9.37
.060
1.52
21
21
21
1
6
Standard
20,800–33,100
[10.5–16.8]
Sight
Hole
1.015
25.78
.232
5.89
.369
9.37
.060
1.52
1.140
28.96
.296
7.52
.463
11.76
.073
1.85
4
Standard
33,100–52,600
[16.8–26.7]
Sight
Hole
1.140
28.96
.296
7.52
.463
11.76
.073
1.85
320238-1
35189*
1.265
32.13
.370
9.40
.539
13.69
.073
1.85
Standard
2
52,600–83,700
[26.7–42.4]
Sight
Hole
1.265
32.13
.370
9.40
.539
13.69
.073
1.85
322246*
Note: Part numbers are shown as loose piece over tape mounted product.
*Part numbers are available in small quantity packages.
1When terminating two or more wires in either end of a butt splice, the combined cross sectional area must be within the listed circular mil area range (CMA).
36
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Butt Splices (Continued)
Wire Size Range
AWG 1/0 to 600 MCM,
CMA 83,700 to 600,000
[42.4 to 304 mm2]
Material
Splice Body—Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
A
Solistrand
Wire
Circular Mils1
[mm2]
Material
Thickness
Max.
Dimensions
Part Numbers
Solistrand
Style
L
Max.
I.D.
Min.
O.D.
Max.
1/0
1.412
.444
.613
.073
83,700–119,500
[42.4–60.6]
A
A
A
A
A
A
A
A
36957*
36958*
35.86
11.28
15.57
1.85
2/0
1.437
36.50
.504
12.80
.693
17.60
.083
2.11
119,500–150,500
[60.6–76.3]
3/0
1.480
37.60
.565
14.35
.775
19.69
.094
2.39
150,500–190,000
[76.3–96.3]
36959*
4/0
1.484
37.69
.635
16.13
.869
22.07
.105
2.67
190,000–231,000
[96.3–117]
36960*
250–300 MCM
231,000–300,000
[117–152]
2.093
53.16
.753
19.13
1.054
26.77
.130
3.30
322279*
322280*
322281*
322282*
300–350 MCM
300,000–380,000
[152–193]
2.217
56.31
.819
20.80
1.137
28.88
.140
3.56
400 MCM
380,000–478,000
[193–242]
2.467
62.66
.925
23.50
1.287
32.69
.158
4.01
500–600 MCM
478,000–600,000
[242–304]
2.811
71.40
1.070
27.18
1.483
37.67
.182
4.62
*Part numbers are available in small quantity packages.
1When terminating two or more wires in either end of a butt splice, the combined cross sectional area must be within the listed circular mil area range (CMA).
37
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Ring Tongue Terminals
Wire Size Range
AWG 26 to 16,
CMA 202 to 3,260
[0.1 to 1.65 mm2]
Material
Terminal Body and Sleeve—
Copper per ASTM B-152
Plating —Tin per MIL-T-10727
Dimensions
Material
Part Numbers
Wire
Insulation
Dia. Max.
Wire Size
Stud
Circular Mils
Thickness
Max.
L
Max.
E
C
Min.
Loose
Piece
Tape
Mounted
Size
2
W
[
]
mm
Max.
.464
.391
.121
.140
.020
.082
0
31516
31518
3216211
31679
31681
32861
32862
320678
31094
30995
31096
31159
31269
31393
31396
30996
31160
31270
31397
30997
31161
31398
31176
31251
—
11.79
9.93
3.07
3.56
0.51
2.08
.464
11.79
.391
9.93
.121
3.07
.140
3.56
.020
0.51
.082
2.08
2-31518-1
1-321621-01
2-31679-1
2-31681-2
2-32861-2
2-32862-1
—
2
M2
.564
14.33
.481
12.22
.211
5.36
.165
4.19
.020
0.51
.082
2.08
26–22
202–810
[0.1–0.41]
.585
14.86
.481
12.22
.211
5.36
.203
5.16
.020
0.51
.082
2.08
4
.585
14.86
.481
12.22
.211
5.36
.203
5.16
.020
0.51
.082
2.08
6
M3.5
.679
17.25
.551
14.00
.281
7.14
.250
6.35
.020
0.51
.082
2.08
8
M4
.679
17.25
.551
14.00
.281
7.14
.250
6.35
.020
0.51
.082
2.08
2
M2
.600
15.24
.507
12.88
.172
4.37
.182
4.62
.033
0.84
.125
3.18
.603
15.32
.491
12.47
.156
3.96
.218
5.54
.033
0.84
.125
3.18
4
—
.775
19.69
.616
15.65
.281
7.14
.312
7.92
.033
0.84
.125
3.18
—
.603
15.32
.491
12.47
.156
3.96
.218
5.54
.033
0.84
.125
3.18
2-31096-1
2-31159-1
2-31269-1
—
.775
19.69
.616
15.65
.281
7.14
.312
7.92
.033
0.84
.140
3.56
6
M3.5
.728
18.49
.585
14.86
.250
6.35
.281
7.14
.033
0.84
.125
3.18
.603
15.32
.491
12.47
.156
3.96
.218
5.54
.033
0.84
.140
3.56
.728
18.49
.585
14.86
.250
6.35
.281
7.14
.033
0.84
.140
3.56
2-31396-2
2-30996-1
2-31160-1
2-31270-1
2-31397-1
2-30997-1
2-31161-1
2-31398-1
2-31176-1
2-31251-1
22–16
509–3,260
[0.26–1.65]
.775
19.69
.616
15.65
.281
7.14
.312
7.92
.033
0.84
.125
3.18
.775
19.69
.616
15.65
.281
7.14
.312
7.92
.033
0.84
.140
3.56
8
M4
.728
18.49
.585
14.86
.250
6.35
.281
7.14
.033
0.84
.125
3.18
.728
18.49
.585
14.86
.250
6.35
.281
7.14
.033
0.84
.140
3.56
.775
19.69
.616
15.65
.281
7.14
.312
7.92
.033
0.84
.125
3.18
.775
19.69
.616
15.65
.281
7.14
.312
7.92
.033
0.84
.140
3.56
10
.728
18.49
.585
14.86
.250
6.35
.281
7.14
.033
0.84
.140
3.56
1.009
25.63
.772
19.61
.437
11.10
.469
11.91
.033
0.84
.140
3.56
1/4
M6
1.009
25.63
.772
19.61
.437
11.10
.469
11.91
.033
0.84
.125
3.18
Note: “C” dimension applies from edge of metal wire barrel to center of stud hole.
1Slightly unusual tongue shape.
38
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Ring Tongue Terminals (Continued)
Wire Size Range
AWG 16 to 10,
CMA 2,050 to 13,100
[1.04 to 6.64 mm2]
Material
Terminal Body and Sleeve—
Copper per ASTM B-152
Plating —Tin per MIL-T-10727
Dimensions
Material
Part Numbers
Wire
Insulation
Dia. Max.
Wire Size
Stud
Circular Mils
Thickness
Max.
L
Max.
E
C
Min.
Loose
Piece
Tape
Mounted
Size
2
W
[
]
mm
Max.
.634
.506
.171
.250
.033
.150
32187
32189
30926
32188
32190
30927
30928
30993
31256
31169
33722
33639
322296
31825
321501
326889
324523
31771
31772
31828
—
—
16.10
12.85
4.34
6.35
0.84
3.81
4
.634
16.10
.506
12.85
.171
4.34
.250
6.35
.033
0.84
.170
4.32
.790
20.07
.616
15.65
.281
7.14
.343
8.71
.033
0.84
.170
4.32
—
6
M3.5
.634
16.10
.506
12.85
.171
4.34
.250
6.35
.033
0.84
.150
3.81
—
.634
16.10
.506
12.85
.171
4.34
.250
6.35
.033
0.84
.170
4.32
2-32190-1
2-30927-1
2-30928-1
2-30993-1
—
16–14
2,050–5,180
[1.04–2.62]
8
M4
.790
20.07
.616
15.65
.281
7.14
.343
8.71
.033
0.84
.170
4.32
.790
20.07
.616
15.65
.281
7.14
.343
8.71
.033
0.84
.170
4.32
10
.790
20.07
.616
15.65
.281
7.14
.343
8.71
.033
0.84
.150
3.81
1/4
M6
1.009
25.63
.772
19.61
.437
11.10
.469
11.91
.033
0.84
.150
3.81
5/16
M8
1.009
25.63
.772
19.61
.437
11.10
.469
11.91
.033
0.84
.170
4.32
2-31169-1
2-33722-1
—
.970
24.64
.796
20.22
.281
7.14
.343
8.71
.050
1.27
.230
5.84
10
16–14HD1
2,050–5,180
[1.04–2.62]
1.220
30.99
.952
24.18
.437
11.10
.531
13.49
.050
1.27
.230
5.84
1/4
M6
1.282
32.56
1.014
25.76
.437
11.10
.531
13.49
.050
1.27
.300
7.62
—
1.007
25.58
.817
20.75
.302
7.67
.375
9.53
.042
1.07
.230
5.84
—
6
M3.5
.877
22.28
.734
18.64
.219
5.56
.281
7.14
.042
1.07
.230
5.84
2-321501-1
—
.976
24.79
.817
20.75
.302
7.67
.312
7.92
.042
1.07
.230
5.84
12–10
5,180–13,100
[2.62–6.64]
8
M4
.955
24.26
.796
20.22
.281
7.14
.312
7.92
.042
1.07
.230
5.84
—
1.007
25.58
.817
20.75
.302
7.67
.375
9.53
.042
1.07
.230
5.84
10
2-31771-1
2-31772-1
—
1/4
M6
1.251
31.78
.983
24.97
.468
11.89
.531
13.49
.042
1.07
.230
5.84
1.345
34.16
1.046
26.57
.531
13.49
.593
15.06
.042
1.07
.230
5.84
3/8
Note: “C” dimension applies from edge of metal wire barrel to center of stud hole.
1Heavy Duty for extra mechanical strength.
39
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Knife Disconnect Splices
Wire Size Range
AWG 22 to 10,
CMA 509 to 13,100
[0.26 to 6.64 mm2]
Material
Splice Body and Sleeve— Copper
per ASTM B-152
Plating — Tin per MIL-T-10727
Dimensions
Wire
Part Numbers
Wire Size
Circular Mils
[mm2]
Insulation
L
Max.
Loose
Piece
Tape
W
Dia. Max.
Mounted
.794
.203
.125
31770
31777
31943
31944
—
22–16
20.17
5.16
3.18
509–3,260
[0.26–1.65]
.794
20.17
.203
5.16
.140
3.56
2-31777-1
.794
20.17
.203
5.16
.150
3.81
—
—
16–14
2,050–5,180
[1.04–2.62]
.794
20.17
.203
5.16
.170
4.32
12–10
5,180–13,100
[2.62–6.64]
1.176
29.87
.281
7.14
.230
5.84
31942
2-31942-1
Slotted Ring Tongue Terminals
Wire Size Range
AWG 26 to 16,
CMA 202 to 3,260
[0.1 to 1.65 mm2]
Material
Terminal Body and Sleeve—
Copper per ASTM B-152
Plating —Tin per MIL-T-10727
Dimensions
E
Part Numbers
Wire Size
Stud
Material
Thickness
Max.
Wire
Insulation
Dia. Max.
Circular Mils
L
Max.
C
Min.
Loose
Tape
Mounted
Size
2
W
[
]
mm
Max.
Piece
26–22
202–810
[0.1–0.41]
6
M3.5
.658
16.71
.551
14.00
.281
7.14
.250
6.35
.020
0.51
.082
2.08
322210
—
6
.710
.585
.250
.281
.033
.125
34101
—
—
22–16
509–3,260
[0.26–1.65]
M3.5
18.03
14.86
6.35
7.14
0.84
3.18
8
M4
.701
17.81
.585
14.86
.250
6.35
.281
7.14
.033
0.84
.140
3.56
321543
Note: “C” dimension applies from edge of metal wire barrel to center of stud hole.
40
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Rectangular Tongue Terminals
Wire Size Range
AWG 22 to 16,
CMA 509 to 3,260
[0.26 to 1.65 mm2]
Material
Terminal Body and Sleeve—
Copper per ASTM B-152
Plating —Tin per MIL-T-10727
Dimensions
E
Part Numbers
Wire Size
Stud
Material
Thickness
Max.
Wire
Insulation
Dia. Max.
Circular Mils
L
Max.
C
Min.
Loose
Piece
Tape
Mounted
Size
2
W
[
]
mm
Max.
22–16
509–3,260
[0.26–1.65]
5
M3
.786
19.96
.633
16.08
.277
7.04
.277
7.04
.033
0.84
.140
3.56
328500
—
Note: “C” dimension applies from edge of metal wire barrel to center of stud hole.
Flanged Spade Tongue Terminals
Wire Size Range
AWG 26 to 14,
CMA 202 to 5,180
[0.1 to 2.62 mm2]
Material
Terminal Body and Sleeve—
Copper per ASTM B-152
Plating —Tin per MIL-T-10727
Dimensions
Part Numbers
Wire Size
Stud
Material
Wire
Circular Mils
Thickness Insulation
L
Max.
E
Max.
C
Loose
Tape
Mounted
Size
2
W
X
H
[
]
mm
Max.
Dia. Max.
Min.
Piece
26–22
202–810
[0.1–0.41]
2
M2
.588
14.94
.473
12.01
.203
5.16
.182
4.62
.110
2.79
.031
0.79
.020
0.51
.082
2.08
324598
2-324598-1
6
.668
.538
.203
.296
.125
.046
.033
.125
2
32419
32495
2-32419-1
22–16
M3.5
16.97
13.67
5.16
7.52
3.18
1.17
0.84
3.18
509–3,260
[0.26–1.65]
8
M4
.761
19.33
.585
14.86
.250
6.35
.416
10.57
.171
4.34
.062
1.57
.033
0.84
.125
3.18
—
—
16–14
2,050–5,180
[1.04–2.62]
8
M4
.685
17.40
.555
14.10
.203
5.16
.294
7.47
.125
3.18
.052
1.32
.033
0.84
.170
4.32
320859
Note: “C” dimension applies from edge of metal wire barrel to center of stud hole.
41
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Spade Tongue Terminals
Wire Size Range
AWG 26 to 16,
CMA 202 to 3,260
[0.1 to 1.65 mm2]
Material
Terminal Body and Sleeve—
Copper per ASTM B-152
Plating —Tin per MIL-T-10727
Dimensions
Part Numbers
Wire Size
Stud
Material
Thickness
Max.
Wire
Insulation
Dia. Max.
Circular Mils
L
Max.
E
Max.
C
Min.
Loose
Piece
Tape
Mounted
Size
2
W
X
[
]
mm
.415
.348
.078
.125
.062
.020
.082
0
4
32502
34248
33766
33799
320379
—
—
—
—
—
26–22
10.54
8.84
1.98
3.18
1.57
0.51
2.08
202–810
[0.1–0.41]
.558
14.17
.481
12.22
.211
5.36
.203
5.16
.072
1.83
.020
0.51
.082
2.08
6
M3.5
.684
17.37
.538
13.67
.203
5.16
.297
7.54
.141
3.58
.033
0.84
.125
3.18
22–16
509–3,260
[0.26–1.65]
6
M3.5
.684
17.37
.538
13.67
.203
5.16
.297
7.54
.141
3.58
.033
0.84
.140
3.56
.807
20.50
.631
16.03
.296
7.52
.343
8.71
.171
4.34
.033
0.84
.125
3.18
10
Note: “C” dimension applies from edge of metal wire barrel to center of stud hole.
42
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Knife Disconnect Splices
Wire Size Range
AWG 22 to 8,
CMA 509 to 20,800
[0.26 to 10.5 mm2]
Material
Splice Body and Sleeve— Copper
per ASTM B-152
Plating — Tin per MIL-T-10727
Dimensions
Part Numbers
Wire Size
Circular Mils
L
Max.
Loose
Piece
2
W
[
]
mm
22–16
.745
.203
509–3,260
[0.26–1.65]
31762
31763
31945
32161
18.92
5.16
16–14
2,050–5,180
[1.04–2.62]
.750
19.05
.203
5.16
12–10
5,180–13,100
[2.62–6.64]
.940
23.88
.281
7.14
8
1.225
31.12
.390
9.91
13,100–20,800
[6.64–10.5]
Rectangular Tongue Terminals
Wire Size Range
AWG 22 to 14,
CMA 509 to 5,180
[0.26 to 2.62 mm2]
Material
Terminal Body and Sleeve—
Copper per ASTM B-152
Plating — Tin per MIL-T-10727
Style A
Style B
with Side Flange
with Bossed Hole
Dimensions
Part Numbers
Wire Size
Stud
Material
Thickness
Max.
Circular Mils
Style
L
Max.
E
Max.
C
Loose
Piece
Size
2
W
X
H
[
]
mm
Min.
22–16
6
.733
.541
.250
.250
.187
.047
.033
509–3,260
[0.26–1.65]
B
A
320671
31674
M3.5
18.62
13.74
6.35
6.35
4.75
1.19
0.84
16–14
2,050–5,180
[1.04–2.62]
8
M4
.647
16.43
.484
12.29
.219
5.56
.344
8.74
.156
3.96
.094
2.39
.033
0.84
Note: “C” dimension applies from edge of metal wire barrel to center of stud hole.
43
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
SOLISTRAND Military Approved Terminals
Military
Specification
SOLISTRAND
Approval
Approved
Wire Range
MS 20659
MS 20659
M7928/7
Class 1 & 2
Class 2 Only
Class 2 Only*
12-10
8-4/0
22-14
SOLISTRAND Class 1 and Class 2 military approved terminals meet the
performance requirements outlined in specification Mil-T-7928G.
*320093 also class 1 approved.
Class 1 and Class 2
Military Approvals
Dimensional
Requirement
Application
Tooling
Performance
Requirement
Approval
Use
Terminals must comply
with the dimensional
requirements specified
by the military.
Hand application tool
which must conform to
For procurement
by government
Class 1
the military’s dimensional agencies for
and performance
specification.
maintenance and
repair.
Dimensional
The terminal
For procurement
by contractors
and
Per Military
Specification
Mil-T-7928G
requirements are
maintained by the
terminal manufacturers.
For field repair
manufacturers
recommended
application tooling.
Note: Several tape
manufacurers
for high volume
Class 2
purposes Class 2
terminals must be capable
of being replaced by
Class 1 Terminals
mounted SOLISTRAND production,
part numbers are
currently Class 2
approved.
modification,
and repair.
Note: Where class 2 approval exists all similar (form, fit and function) parts in that product line are approved.
Cross Reference Military to AMP Part Number
Military Specification
M7928/7
M7928/7
Dash
Numbers
SOLISTRAND
Part
Numbers
Stud
Size
Class
AWG
34103
2-34103-1
34104
Wire Size Range
AWG 22 to 14
1
2
2
2
2
4
2-34104-6
34110
3
2
6
10
5/6
3/8
6
2-34110-3
34112
22-18
4
2
2-34112-2
34114
5
2
2-34114-2
34115
6
2
2-34115-2
321684
7
2
2-321684-1
320093
8
1 & 2
10
5/16
3/8
4
2-320093-1
34125
16-14
9
2
2
2
2-34125-6
34126
10
11
2-34126-2
34119
2-34119-1
Note: Part numbers are shown as loose piece over tape mounted product.
44
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Cross Reference Military to AMP Part Number
Military Specification
MS 20659
MS20659
Dash
Numbers
SOLISTRAND
Part
Numbers
Stud
Size
Class
AWG
33457
2-33457-2
33459
1&2
2
Wire Size Range
AWG 12 to 4/0
105
106
107
10
5/16
10
12-10
1&2
2
2-33459-6
31807
2
2-31807-2
31808
8
108
109
110
111
112
113
114
117
118
119
120
121
122
123
124
128
129
130
2
2
5/16
1/4
3/8
1/4
3/8
1/4
3/8
1/4
3/8
5/16
3/8
3/8
1/2
3/8
1/2
3/8
3/8
10
321598
33467
6
2
31811
2
4
31812
2
320383
321600
321866
321868
321870
321871
321875
321877
321878
321880
33220
2
2
2
2
1/0
2/0
3/0
4/0
2
2
2
2
2
2
2
12-10
8
1&2
2
33463
321298
33466
2
6
131
2
5/16
2-33466-3
33115
4
132
135
136
137
140
2
2
2
2
2
5/16
1/2
1/2
7/8
8
1/0
2/0
4/0
36919
321873
321625
324061
33461
8
2
1/4
141
2-33461-2
320344
33114
6
4
143
144
145
146
147
148
151
152
153
154
155
156
157
158
159
160
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1/2
10
327175
330301
322870
320741
321867
36918
1/2
10
5/16
7/16
5/16
7/16
1/4
2
1/0
2/0
3/0
321869
321872
321874
321876
321271
321879
36935
7/16
5/16
7/16
5/16
7/16
5/8
4/0
322228
35476
3/4
165
166
2
2
6
12-10
2-35476-1
35135
1/2
Note: Part numbers are shown as loose piece over tape mounted product.
45
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Description of MIL-T-7928G Test Procedures and Requirements for Terminals
Test
Group
Test
Sequence
Test
Type
Test
Description
Samples subjected to 50 cycles, each cyle consisting of
30 minutes at 125% of the current listed on page 48
followed by 15 minutes with no load.
A
Current Cycling
1
2
B
A
B
C
Voltage Drop
Vibration
See test method and requirements on page 48.
See test method on page 46.
Voltage Drop
Tensile
See test method and requirements on page 48.
See test method and requirements on page 47.
Samples subjected to a salt spray/fog for 48 hours.
Salt concentration to be 5%, temperature to be 35° C
(95°) F, relative humidity to be 95-98%.
A
Salt Spray/Corrosion
3
4
B
C
Voltage Drop
Tensile
See test method and requirements on page 48.
See test method and requirements on page 47.
Samples subjected to 193° C for 120 hours then cooled
to 23° C within one hour.
A
Heat Age
Samples subjected to a salt spray/fog for 48 hours.
Salt concentration to be 5%, temperature to be 35° C
(95°) F, relative humidity to be 95-98%.
B
Salt Spray/Corrosion
C
D
Voltage Drop
Tensile
See test method and requirements on page 48.
See test method and requirements on page 47.
Procedure for Vibration Testing of Terminals per MIL-T-7928G
Wire Size
“D” Dimension
12 inches
Duration of Test
#12 AWG and larger or terminals
with insulation support
18 hours each on horizontal
and vertical axis.
#14 AWG and smaller with
no insulation support
2 hours each on horizontal
and vertical axis.
17 inches
Vibration to be a simple harmonic motion with an amplitude of 0.03 inches (0.06 total excursion). Frequency to vary
uniformly from 10–55 Hz and back to 10 Hz. Frequency to be traversed in approximately one minute.
46
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Military Tensile Test Results
Tensile Requirements
Per MIL-T-7928G
SOLISTRAND Tensile Test Results
Wire Sizes 22 – 10
Tensile (lbs.)
Wire Size
Minimum Tensile
Strength (Lbs)
250
AWG
22
20
18
16
14
12
10
8
15
19
38
200
150
100
50
50
70
110
150
225
300
400
550
700
750
825
875
6
4
2
1/0
2/0
3/0
4/0
Note: 1. Samples tensile tested to
destruction at a rate of one inch/
minute using military approved wire.
0
22
18
16
14
12
10
Wire Size
SOLISTRAND Tensile Test Results
Wire Sizes 1/0 – 4/0
SOLISTRAND Tensile Test Results
Wire Sizes 8–2
Tensile (lbs.)
1500
Tensile (lbs.)
3500
3000
2500
2000
1500
1000
500
1000
500
0
0
8
6
4
2
1/0
2/0
3/0
4/0
Wire Size
Wire Size
Tensile after
Vibration
Tensile after
Salt Spray
MIL-T-7928
Requirement
47
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Illustration of Millivolt Drop Measurement Procedure
Military Specification
MIL-T-7928G
Maximum Crimp MVD =
EWL Measurement + Valve
Test
Wire Size
AWG
Listed Below
Current
(Amperes)
Initial
Final
Terminal
Terminal
22
20
18
16
14
12
10
8
9
11
16
22
32
41
1
3
55
73
6
101
135
181
245
283
328
380
4
2
1/0
2/0
3/0
4/0
2
4
Military Millivolt Drop Test Results
MVD
10
SOLISTRAND
Millivolt Drop Results
Per MIL-T-7928G
Using Military
Approved Wire
8
6
4
Max. Allowable MVD
MVD of Equal Wire
Length
After Current Cycling
After Vibration
After Corrosion
2
0
22
18
16
14
12
10
8
6
4
2
1/0
2/0
3/0
4/0
Wire Size
48
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Description of UL 486A Test Procedures and Requirements for Terminals
Wire Size Range
Pullout Test Requirements
Static Heat Test Requirements
Terminal must not be separate from wire when
subjected to the listed load for one minute.
AWG 22 to 600 MCM
Wire Size
AWG
22
Test Current
(Amperes)
Wire Size
AWG
22
Pullout
9
Test Sequences
Force (lbs.)
20
12
Test Group 1
Mechanical Sequence
1. Secureness
2. Pullout
8
18
17
20
13
16
18
18
20
14
30
16
30
12
35
Test Group 2
Mechanical Sequence
14
50
10
50
12
70
8
70
1. Secureness
2. Static Heat
3. Pullout
10
80
6
95
8
90
4
125
170
230
265
310
360
405
445
505
545
620
690
6
100
140
180
250
300
350
450
500
550
600
650
800
900
2
4
1/0
2/0
3/0
4/0
250
300
350
400
500
600
2
1/0
2/0
3/0
4/0
250
300
350
400
500
600
Requirement:
Connector temperatures must not exceed the ambi-
ent temperature plus 50°C [90°F] after stability is
attained.
Note: Testing conducted on non-plated
copper wire with UL approved insulation.
Stability:
A test sample is considered to have attained a stable
temperature when three readings taken at not less
than 10 minute intervals show no more than a 2°C
[3.6°F] variation between any two readings.
Secureness Test Requirements
Wire Size
AWG
18-16
14
Bushing
Dia.
Weight
(lbs.)
Height
1/4
3/8
3/8
3/8
1/2
1/2
9/16
5/8
3/4
3/4
3/4
7/8
7/8
1
10 1/4
11
2
3
12-10
8
11
5
11
8
6
11 3/4
11 3/4
12 1/2
13 1/2
14 1/2
14 1/2
14 1/2
16
18
30
30
50
50
60
60
60
80
80
100
4
2
1/0
2/0
3/0
4/0
250
300
16
350-400
500-600
17
1 1/8
18 1/4
Note: Test Duration = 30 Minutes
49
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Description of UL 486A & C Test Procedures and Requirements
for Butt and Parallel Type Splices
UL 486 C Wire Size
AWG 22 to 6
Pullout Test Requirements
Splices must not be separate from wire when
subjected to the listed load for one minute.
Static Heat Test Requirements
Wire Size
AWG
22
Test Current
(Amperes)
UL 486 A Wire Size
AWG 4to 600 MCM
Wire Size
AWG
22
Pullout
Force (lbs.)
9
20
12
8
18
17
20
10
16
18
Test Sequences
18
10
14
30
Test Group 1
Mechanical Sequence
1. Secureness
2. Pullout
16
15
12
35
14
25
10
50
12
35
8
70
10
40
6
95
Test Group 2
Mechanical Sequence
1. Secureness
2. Static Heat
3. Pullout
8
45
4
125
170
230
265
310
360
405
445
505
545
620
690
6
50
2
4
140
180
250
300
350
450
500
550
600
650
800
900
1/0
2/0
3/0
4/0
250
300
350
400
500
600
2
1/0
2/0
3/0
4/0
250
300
350
400
500
600
Requirement:
Connector temperatures must not exceed the ambi-
ent temperature plus 50°C [90°F] after stability is
attained.
Note: Testing conducted on non-plated
copper wire with UL approved insulation.
Stability:
A test sample is considered to have attained a stable
temperature when three readings taken at not less
than 10 minute intervals show no more than a 2°C
[3.6°F] variation between any two readings.
Secureness Test Requirements
Wire Size
Bushing
Dia.
Weight
(lbs.)
Height
AWG
18-16
14
1/4
3/8
3/8
3/8
1/2
1/2
10 1/4
11
2
3
12-10
8
11
5
11
8
6
11 3/4
11 3/4
18
30
4
Note: Test Duration=30 Minutes
50
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Application Tooling Information for SOLISTRAND, Budget and
DIAMOND GRIP Products
Wire Size Range
AWG 26 to 6
Tooling For
Tape Mounted Products
Pneumatic Tooling
Dies for
69875
Dies for 6-26, Tool
189721-1 Requires
Straight Action
Adapter 217200-1
or 318161-1
Crimping
Heads
for
AMP-TAPETRONIC
AMP
Wire
Size
Product
Type
Hand
Tools
AMP-O-LECTRIC6
6-26,
Requires
Applicator
Tool
189721-1
Dies Also Fit
69710-1
AMPOMATOR CLS IV
Requires
Hand Tool
Single
Multiple
Wire Range
Wire Range
Applicators
26-22
24-20
22-16
16-14
693632
—
—
—
—
All
314516-1
314517-1
679301-1
679301-1
47812
47813
*68240-1
*68241-1
SOLISTRAND
terminals and
splices except
for Flag Tongue
terminals
499352
58546-13
12-10 &
16-14 HD
*
—
679301-1
478141
68242-1
14-12
495922
—
314518-1
679302-1
679303-1
—
—
—
—
—
—
*90566-1
*68243-1
—
8
6
—
Flag terminals not
available in tape
mounted form
16-14
12-10
499752
499652
693632
58508-14
58508-14
217204-1
217203-1
Flag Tongue
terminals only
—
—
26-22
22-16
16-14
12-10 &
16-14 HD
—
*
*
Budget
terminals and
splices
68259-1
—
—
—
68094
-1
49656, 58508-14
*68260-1
26-22
24-20
22-16
16-14
48070*
—*
—
—
—
—
—
—
—
—
—
—
*69902-1
—
DIAMOND
GRIP
terminals
and splices
49512*
49513*
—
*69903-1
69904-1
46251-2*
12-10 &
16-14 HD
*
59054
—
—
—
*—-1
26-22
22-16
16-14
12-10
8
—*
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
48364*
—*
Standard
“B”
terminals
49736*
49737*
1For standard wire only.
2CERTI-CRIMPHand Tool.
3Contains die set 58545-1. PRO-CRIMPER II commercial tool not approved for UL applications.
4Contains die set 58509-1. PRO-CRIMPER II commercial tool not approved for UL applications. Not approved for use with Budget Spring Spade terminals.
5With locator, for terminals only.
6Call Tooling Assistance Center for Machine & Applicator part numbers.
Chart lists common AMP Application Tooling. For additional information call the Tooling Assistance Center 1-800-722-1111.
51
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Application Tooling Information for SOLISTRAND Terminals and Splices
Wire Size Range
AWG 8 to 600 MCM
1
CERTI-CRIMPHand Tool.
2
These crimping heads are recommended for use only with AMP Hydraulic Hand Pump 314979-1, DYNA-CRIMPHydraulic Power Units 69120-1
(115 VAC) and 69120-2 (230 VAC), and with DYNA-CRIMP II Battery Operated Hydraulic Power Unit 122271-1. See pages 55 & 56.
Chart lists common AMP Application Tooling. For additional information call the Tooling Assistance Center 1-800-722-1111.
52
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Application Tooling
Loose Form Terminal
and Splice Tooling
CERTI-CRIMP Hand Tools
Heavy Head Hand Tool
Part No. 69355
Double Action
Hand Tool
“C” Head Straight
Action Hand Tool
Part No. 69710–1
PRO-CRIMPER II
Hand Tool
Part No. 58546-1 SOLISTRAND
58508-1 Budget
Pneumatic Tools
Part No. 69015
6-26 Pneumatic Tool
Part No. 189721-1
Hydraulic Hand Tools
Part No. 59975-1
(Self Contained Dies)
Part No. 59973-1
(Dies Required)
For additional tooling information, call 1-800-722-1111.
53
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Application Tooling (Continued)
Tape Mounted
AMP-TAPETRONIC Machine
69875, 68250-1
AMP-O-LECTRIC, Model “G” Machine
(Requires Applicator and Dies)
(Requires Dies)
AMPOMATOR CLS IV Machine 217500-1
(Requires Applicators and Dies)
Entry Level Terminator
(Requires Applicators and Dies)
For additional tooling information, call 1-800-722-1111.
54
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Application Tooling (Continued)
Latch Heads and Dies
Part No.
69065
Part No.
58445-1
Part No.
69067
Part No. 69069
(Self Contained Dies)
Part No.
69099
Part No.
69097
Part No.
69082
For additional tooling information, call 1-800-722-1111.
55
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Application Tooling (Continued)
DYNA-CRIMP II
Battery Operated
Hydraulic Power Unit
Hand Operated Power Unit
DYNA-CRIMP Electric
Hydraulic Power Unit
Typical interchangable hose,
head and dies not included
4
Power Unit Only
(Includes Pressure Release)
115 Volts (60 Hz) — 69120-13
230 Volts (60 Hz) — 69120-23
Part No. 122271-1
314979-12 (Hose, head and dies not included)
Refer to the table below for accessories.
AMP application tools are designed to
produce a carefully controlled uniform
pressure crimp, regardless of how they
are powered. All tools shown are
specially designed for AMP products
and are precision machined from hard
tool steel.
Handle
Control
Hose
Assembly
Foot
Control
Multidirectional
Valve
Power Units Accessories
For Use With
Power Unit No.
Accessory
Part No.
Accessory Description
Remarks
7' Handle Control Assembly—Hose & Cord
15' Handle Control Assembly—Hose & Cord
21' Handle Control Assembly—Hose & Cord
28' Handle Control Assembly—Hose & Cord
59907-7
1-59907-5
2-59907-1
2-59907-8
15' Foot Switch Assembly
68284-1
Need Hose Assembly
369120-13
369120-23
314979-12
122271-14
3' Hose Assembly
7' Hose Assembly
15' Hose Assembly
21' Hose Assembly
59909-3
59909-7
1-59909-5
2-59909-1
68284-1 Foot Switch
Assembly needed with
these Hose Assemblies
and 69120
2' Hose Assembly (1/4” I.D.)
3' Hose Assembly (1/4” I.D.)
7' Hose Assembly (1/4” I.D.)
15' Hose Assembly (1/4” I.D.)
314990-1
314990-2
314990-3
314990-4
More Flexible, Lighter Weight.
Recommended for use with
DYNA-CRIMP II Battery
Operated Hydraulic Power Unit
69120-13
69120-23
3-Way Multi-Directional Value
3-Way Multi-Directional Value (Elec.Ctl)
592201
For use with
Foot Switch only
59220-21
1 Contact AMP Incorporated for usage recommendations.
2 Also see AMP Customer Manual 409-5860.
3 Also see AMP Customer Manual 409-1950.
4 Also see AMP Customer Manual 409-5869.
Note: All Hoses and Handle Control Assemblies have a 3⁄8" high flow male coupler (311470-1) on each end.
All Power Units and Heads have a 3⁄8" high flow female coupler (311471-1).
For additional tooling information, call 1-800-722-1111.
56
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Part Number Index
Note: This numerical index lists all cata-
loged parts by base no. only. Complete
part nos. (with prefixes and/or suffixes)
are shown on the page(s) indicated.
Part No.
31499
31516
31518
31587
31588
31589
31628
31634
31635
31636
31674
31679
31681
31691
31704
31705
31706
31762
31763
31770
31771
31772
31777
31805
31807
31808
31811
31812
31813
31818
31819
31821
31825
31828
31942
31943
31944
31945
32151
32161
32185
32186
32187
32188
32189
32190
32416
32418
32419
32463
32464
32494
32495
32501
32502
32503
32579
32822
32823
32824
32858
32859
Page
14
38
38
26
26
26
32
26
26
26
43
38
38
24
26
26
26
43
43
40
39
39
40
14
15
15
16
16, 21
24
36
36
24
39
39
40
40
40
43
36
43
13
13
39
39
39
39
30
30
41
36
36
30
41
26
42
32
24
12
12
13
12
12
Part No.
32860
32861
32862
32882
32994
32995
32996
33114
33115
33195
33202
33219
33220
33221
33426
33437
33456
33457
33458
33459
33460
33461
33462
33463
33464
33465
33466
33467
33468
33469
33470
33471
33479
33639
33646
33647
33648
33695
33716
33717
33718
33722
33728
33729
33765
33766
33799
34101
34103
34104
34105
34107
34108
34109
34110
34111
34112
34113
34114
34115
34117
34118
Page
12
38
38
14
14
26
15
16
16, 21
22
26
26
15
26
25
32
14
14
14
14
15
15
15
15
16
16
16, 21
16
16
16
16
16
26
39
22
22
22
12
22
22
22
39
22
22
26
42
42
40
12
12
12
12
12
13
12
12
13
13
13
13
26
26
Part No.
34119
34120
34121
34122
34123
34124
34125
34126
34128
34129
34130
34137
34138
34194
34226
34227
34228
34247
34248
34261
34266
34318
34319
34320
34321
34322
34323
34384
34404
34459
34484
34486
34487
34518
34520
34525
34567
34582
34583
34829
34830
34833
34834
34891
34892
34896
34964
34965
34966
34967
34968
34969
35116
35135
35183
35184
35185
35187
35189
35212
35247
35277
Page
13
13
13
13
13
14
14
14
26
26
35
35
35
12
36
36
36
26
42
32
24
35
35
35
36
36
36
26
14
24
14
14
14
26
31
24
22
26
26
22
22
15
15
14
14
13
14
14
14
22
22
22
26
15
17
17
17
35
36
32
15
21
Part No.
30691
30692
30693
30694
30695
30696
30697
30926
30927
30928
30953
30972
30993
30995
30996
30997
31049
31087
31088
31089
31090
31091
31094
31096
31101
31112
31113
31114
31120
31122
31123
31159
31160
31161
31163
31164
31165
31169
31172
31173
31176
31251
31256
31264
31265
31266
31269
31270
31393
31396
31397
31398
31423
31425
31428
31430
31442
31498
Page
12
12
13
13
13
13
13
39
39
39
36
15
39
38
38
38
13
12
12
12
12
12
38
38
12
14
14
14
14
14
14
38
38
38
13
14
14
39
13
13
38
38
39
12
12
13
38
38
38
38
38
38
12
12
12
12
26
13
57
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Part Number Index (Continued)
Part No.
35278
35432
35476
35493
35494
35495
35555
35625
35664
35665
35666
35668
35669
35670
35678
35680
35771
35772
35775
35776
36189
36195
36199
36200
36201
36216
36269
36270
36271
36272
36451
36467
36499
36807
36808
36809
36810
36815
36880
36886
36906
36909
36915
36916
36917
36918
36919
36921
36922
36923
36925
36927
36929
36930
36932
36934
36935
36946
36948
36951
36953
36957
Page
24
22
14
26
26
26
31
21
15
15
15
17
17
17
21
31
14
14
22
22
12
26
22
22
22
31
33
33
33
33
14
12
15
16
16
16
16
16
26
36
36
35
17
17
17
17
18
18
18, 21
18
18
18
19, 21
19
19
19
19
35
35
35
31
37
Part No.
36958
36959
36960
50334
50981
50982
51872
51875
52197
52269
52512
52700
52701
52702
52703
52704
52705
52706
52707
52708
52709
52710
52712
52713
52714
52715
52716
52717
52730
52733
52734
52735
52772
53000
53001
53002
53003
53004
53005
53006
53007
53009
53010
53011
53012
53013
53014
53015
53016
53032
53033
53047
53106
53111
53120
53121
53123
53124
53125
53126
53127
53128
Page
37
37
37
12
14
14
13
30
16
15
30
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
30
29
29
29
29
27
27
27
27
27
27
27
27
28
28
28
28
28
28
28
28
28
29
29
16
29
27
27
28
28
28
28
28
28
Part No.
53150
Page
27
27
28
28
27
27
27
27
28
28
28
28
26
27
27
27
28
28
28
28
31
15
33
21
13
17
36
18
16
42
17
43
12
38
17
17
18
16
18
30
17
17
22
22
15
15
15
15
15
15
24
24
24
24
24
25
25
30
30
30
30
30
Part No.
320857
320859
320870
321007
321024
321051
321056
321059
321060
321063
321064
321066
321121
321123
321163
321165
321198
321201
321253
321259
321262
321265
321271
321272
321275
321277
321280
321288
321289
321298
321441
321463
321499
321501
321543
321557
321558
321576
321580
321582
321584
321598
321600
321621
321625
321632
321683
321684
321691
321801
321809
321827
321828
321829
321866
321867
321868
321869
321870
321871
321872
321873
Page
30
41
24
13
36
33
33
33
33
33
33
34
33
34
19
22
36
33
33
34
21
21
19
21
33
34
36
31
31
16
33
26
25
39
40
25
25
33
34
34
34
16
17
38
19
32
13
13
24
36
31
14
14
14
17
17, 21
17
18
18
18
18
18
53175
53177
53226
53235
53266
53267
53268
53270
53271
53273
53274
53555
53830
53831
53832
53833
53834
53835
53836
55812
55991
184147
184269
320093
320138
320238
320266
320344
320379
320383
320671
320677
320678
320741
320743
320744
320745
320748
320749
320754
320755
320758
320759
320760
320761
320762
320763
320764
320765
320814
320815
320818
320819
320820
320822
320823
320852
320853
320854
320855
320856
58
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices
Catalog 65505
Revised 9-00
Part Number Index (Continued)
Part No.
321874
321875
321876
321877
321878
321879
321880
322204
322210
322211
322215
322222
322223
322224
322225
322227
322228
322235
322242
322246
322252
322253
322254
322257
322258
322259
322262
322263
322264
322267
322269
322270
322271
322273
322275
322276
322277
322278
322279
322280
322281
322282
322291
322296
322391
Page
18, 21
18
18
19
19
19
19
33
40
31
34
19
19
18
18
19
19
13
15
36
19
19
19
20
20
20
20
20
20
20
20
20
20
20
35
35
35
35
37
37
37
37
18
39
18
Part No.
322408
322418
322428
322441
322443
322445
322447
322451
322454
322455
322459
322514
322704
322725
322727
322763
322764
322768
322771
322772
322773
322776
322819
322821
322832
322833
322870
322905
322906
322909
322912
322927
322939
322945
322946
322996
323034
323050
323086
323087
323096
323106
323112
323119
323124
Page
24
12
20
32
32
32
14
26
14
14
36
31
16
30
33
20
20
21
12
20
20
30
33
21
22
22
17, 21
21
21
21
21
12
20
25
25
26
19
19
12
13
12
24
24
24
30
Part No.
323127
323129
323135
323136
323140
323143
323144
323196
323222
323291
323823
323832
323834
323835
323837
323838
323868
324001
324023
324035
324061
324105
324124
324202
324209
324521
324523
324578
324579
324598
324599
324604
324605
324893
324898
324910
324911
324955
325069
325195
325196
326850
326854
326889
327025
Page
26
31
32
30
19
30
30
33
20
17
26
31
26
31
31
31
18
36
21
21
15
20
13
20
32
26
39
30
30
41
30
30
30
36
36
14
14
13
33
26
26
12
13
39
36
Part No.
327175
327732
327882
327887
327902
327905
327951
327953
327955
327959
327971
328050
328339
328341
328342
328349
328353
328355
328356
328363
328377
328395
328500
328522
328872
328970
328971
329966
330301
330367
330368
330369
330539
330827
330968
330969
330970
331269
331401
331414
331417
331420
331423
331880
332042
Page
17
22
20
34
32
32
24
25
24
25
25
25
24
24
24
24
24
24
24
24
13
26
41
30
31
13
14
13
17
36
36
36
24
26
22
23
23
25
12
22
23
23
23
23
22
59
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
Contact Us Worldwide
Catalog 65505
Revised 9-00
Americas
Argentina – Buenos Aires
Phone: + 54-1-733-2000
Fax: + 54-1-717-0988
Chile – Santiago
Phone: + 56-2-739-1230
Fax: + 56-2-739-1227
United States – Harrisburg, PA
Phone: + 1-717-564-0100
Fax: + 1-717-986-7575
Brazil – Sao Paulo
Phone: + 55-11-861-1311
Fax: + 55-11-861-0397
Colombia – Bogota
Phone: + 57-1-231-9398
Fax: + 57-1-240-3769
Venezuela – Caracas
Phone: + 58-2-986-7774
Fax: + 58-2-986-9739
Canada – Toronto
Phone: + 1-905-475-6222
Fax: + 1-905-474-5520
Mexico – Mexico City
Phone: + 52-5-729-0400
Fax: + 52-5-361-8545
For Latin/South American
Countries not shown
Phone: +54-11-4733-2015
Fax: +54-11-4733-2083
Asia/Pacific
Australia – Sydney
Phone: + 61-2-9840-8200
Fax: + 61-2-9899-5649
Malaysia – Selangor
Phone: + 60-3-7053055
Fax: + 60-3-7053066
Philippines – Makati City
Phone: + 632-867-8641
Fax: + 632-867-8661
India – Bangalore
Phone: + 91-80-841-0200
Fax: + 91-80-841-0210
New Zealand – Auckland
Phone: + 64-9-634-4580
Fax: 64-9-634-4586
Singapore – Singapore
Phone: + 65-482-0311
Fax: + 65-482-1012
Indonesia – Jakarta
People’s Republic of China
Hong Kong
Taiwan – Taipei
Phone: + 6221-526-7852
Fax: + 6221-526-7856
Phone: + 886-2-2325-0391
Fax: + 886-2-2325-0398
Phone: + 852-2735-1628
Fax: + 852-2735-0243
Japan – Tokyo
Phone: + 81-44-844-8111
Fax: + 81-44-812-3207
Thailand – Bangkok
Phone: + 66-2-955-0500
Fax: + 66-2-955-0505
Shanghai
Phone: + 86-21-6485-0602
Fax: + 86-21-6485-0728
Korea – Seoul
Phone: + 82-2-3274-0535
Fax: + 82-2-3274-0524/0531
Vietnam – Ho Chi Minh City
Phone: + 84-8-8232-546/7
Fax: + 84-8-8221-443
Shunde
Phone: + 86-765-7751368
Fax: + 86-765-7752823
Europe/Middle East/Africa
Germany – Bensheim
Phone: + 49-6251-133-0
Fax: + 49-6251-133-600
Austria – Vienna
Inside: Phone: + 0222-277-97-0
Fax: + 0222-277-97-333
Sweden – Upplands Vasby
Phone: + 46-8-50-72-50-00
Fax: + 46-8-50-72-50-01
Norway – Nesbru
Phone: + 47-66-77-8899
Fax: + 47-66-77-8855
Outside: Phone: + 43-1-277-97-0
Fax: + 43-1-277-97-333
Germany – Neunkirchen - HTS Div.
Phone: + 49-2247-305-0
Switzerland – Steinach
Phone: + 41-71-447-0447
Fax: + 41-71-447-0444
Poland – Warsaw
Phone: + 48-22-611-59-30
Fax: + 48-22-672-47-88
Fax: + 49-2247-305-122
Belgium – Kessel - Lo
Phone: + 32-16-35-23-00
Fax: + 32-16-35-23-52
Great Britain – London
Phone: + 44-208-954-2356
Fax: + 44-208-954-6234
Turkey – Istanbul
Phone: + 90-212-281-8181/2/3
Fax: + 90-212-281-8184
Portugal – Lisbon
Phone: + 351-1-387-70-16
Fax: + 351-1-387-71-72
Bulgaria – Sofia
Phone: + 359-2-971-2152
Fax: + 359-2-971-2153
Greece – Athens
Phone: + 30-1-9370-396/7
Fax: + 30-1-9370-655
Ukraine – Kiev
Phone: + 38-044-246-5501
Fax: + 38-044-246-5501
Romania – Bucharest
Phone: + 40-1-311-3479/3596
Fax: + 40-1-312-0574
Czech Republic – Kurim
Phone: + 420-5-41-162-111
Fax: + 420-5-41-162-223
Holland – ’s-Hertogenbosch
Phone: + 31-73-624-62-46
Fax: + 31-73-621-23-65
Russia - Moscow
Phone: + 7-095-926-5506/07/08/09
Fax: + 7-095-926-5505
For Middle East/African
Countries not shown
Phone: +33-1-34-20-83-83
Fax: +33-1-34-20-86-09
Denmark – Viby
Phone: + 45-86-295-055
Fax: + 45-86-295-133
Hungary – Budapest
Phone: + 36-1-350-8633
Fax: + 36-1-350-8634
Russia - St. Petersburg
Phone: + 7-812-325-30-83
Fax: + 7-812-325-32-88
Egypt – Cairo
Phone: + 202-417-76-47
Fax: + 202-419-23-34
Ireland – Dublin
Phone: + 353-1-820-3000
Fax: + 353-1-820-9790
Slovakia – Banska Bystrica
Phone: + 421-88-415-20-11/12
Fax: + 421-88-415-20-13
Estonia – Haabneeme
Phone: + 372-6205-900
Fax: + 372-6205-980
Israel – Tel Aviv
Phone: + 972-3-649-1482
Fax: + 972-3-648-4041
Slovenia – Ljubljana
Phone: + 386-61-161-3270
Fax: + 386-61-161-3240
Finland – Helsinki
Phone: + 358-9-512-34210
Fax: + 358-9-512-34250
Italy – Torino
Phone: + 39-011-4012-111
Fax: + 39-011-4031-116
South Africa – Midrand
Phone: + 27-11-314-10-89
Fax: + 27-11-314-19-10
France – Cergy - Pontoise
Phone: + 33-1-3420-8888
Fax: + 33-1-3420-8600
Lithuania – Vilnius
Phone: + 370-2-231-402
Fax: + 370-2-231-403
Spain – Barcelona
Phone: + 34-93-291-0330
Fax: + 34-93-201-7879
65505-5M-LUG-DAS-9-00
Printed in U.S.A.
Tyco Electronics Corporation, Harrisburg, PA 17105
Technical Support Center Phone: 1-800-522-6752, fax: 717-986-3316; Internet; http://www.amp.com
相关型号:
©2020 ICPDF网 联系我们和版权申明