0-1393824-4 概述
Cradle Relay Accessories and Mounting 摇篮继电器配件与安装
0-1393824-4 数据手册
通过下载0-1393824-4数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载The Best Relaytion
Cradle Relay Accessories
108-98016
Rev. B
EC-JM00-0009-03
ECOC: JM10
1. Aug. 04
Cradle Relay Accessories and Mounting
Sockets with hand solder terminals
Sockets with PCB terminals
Size I
Size I
Approx. weight 3.5 g
Approx. weight 4.5 g
Size II
Size II
Approx. weight 5.5 g
Approx. weight 4.5 g
Size III
Size III
Approx. weight 5.5 g
Approx. weight 6.5 g
European Directive conformance:
Cradle Accessories product conformance according to:
-
-
Directive 2000/53/EC: ELV (End of Life of Vehicles)
Directive 2002/95/EC: ROHS (Restrictions of the
use of certain hazardous substances in electrical and
electronic equipment)
Compliance is evidenced by written declaration from all raw
material suppliers.
Tyco Electronics AXICOM only has responsibility for the proper
processing of these materials.
Confirmation is valid for date codes ≥ 0501
Page 2 (9)
108-98016 Rev. B
Cradle Relay Accessories and Mounting
Sockets with hand solder terminals
Sockets with PCB terminals
Dimension drawing (in mm)
with hold-down spring for cradle relays N, S and P
with hold-down spring for cradle relay W
Socket
Size I
26.6
Size II
32.5
Size III
38
Dimension a
Page 3 (9)
108-98016 Rev. B
Cradle Relay Accessories and Mounting
Ordering Code
Version
Size
Ordering code
Tyco Part Number
Sockets
for printed circuit mounting,
I
II
III
I
V23154-Z1001
V23154-Z1002
V23154-Z1028
V23154-Z1005
V23154-Z1006
V23154-Z1015
0-1393824-1
9-1393809-1
1-1393824-0
0-1393824-4
0-1393824-5
0-1393824-8
terminals silver-plated
with earth terminal
for solder terminals,
hand solder terminals, silver-plated
II
II
Hold-down springs
for cradle relays N, S and P
I
II
III
I
V23154-Z1021
V23154-Z1022
V23154-Z1034
V23154-Z1023
V23154-Z1024
0-1393827-1
0-1393827-2
0-1393760-2
0-1393827-3
0-1393760-1
for cradle relay W
II
Gold plated terminals on request
General Data
Terminal material
CuSn8 FB 390 plated with min. 3 mm silver or min. 1 mm gold
Phenolformaldehyde - type 31 (DIN 7708, part 2)
Makrolon (polycarbonate)
Socket material with solder terminals
Socket material with PCB terminals
Maximum continous current at 70° C
5 A
Page 4 (9)
108-98016 Rev. B
Cradle Relay Accessories and Mounting
Minimum spacings between sockets
Dimension drawing (in mm)
with hold-down spring for cradle relays N, S and P
Socket
Size I
Dimension c
27
33
39
Size II
Size III
for cradle relay P
Relays oriented in the same direction
Socket
Size I
Dimension b
Dimension c
27
33
39
42
48
54
Size II
Size III
Relays oriented inversely to each other
When mounting cradle relay P consideration should be given to magnetic fields. Strong DC magnetic fields, possibly caused by adjacent relays,
and large iron masses are the most common causes of interference. Experience has shown that under normal operating conditions the minimum
spacings specified for cradle relay P are sufficient to prevent cross interference.
Page 5 (9)
108-98016 Rev. B
Cradle Relay Accessories and Mounting
Mounting hole layout for cradle relays and sockets with hand solder terminals
Dimension drawing (in mm)
with hold-down spring for cradle relays N, S and P
Size I
Size II
Size III
*) This hole is omitted when the mounting hole layout is intended for the socket.
Fixing of the socket
AM 2.5 x ... DIN 84
(Screw length = Dimension a + 3.5 mmm
2.7 DIN 433
BM 2.5 DIN 439
Earth spring
Direct mounting of relays without socket requires a fixing nut M2.5 DIN 934-m6AU.
Ordering code: D00934-A0025-S001
Page 6 (9)
108-98016 Rev. B
Cradle Relay Accessories and Mounting
Mounting hole layot for sockets with PCB terminals
Basic grid 2.5 mm according to EN 60097
Dimension drawing (in mm)
Size I
Size II
Size II
View onto the terminals
M = Earth terminal
a) Hole for mechanical armature actuation, if required
b) Hole for the socket mounting with screw M1.6
Fixing of the socket
AM 1.6 x ... DIN 84
(Screw length = Dimension a + 7.5 mm
1.7 DIN 433
BM 1.6 DIN 439
Page 7 (9)
108-98016 Rev. B
Cradle Relay Accessories and Mounting
IM Relays
D2n Relays
4th generation slim line – low profile polarized 2 c/o telecom relay with
bifurcated contacts, available as non latching or latching relay with
1 coil. Nominal voltage range from 1.5... 24 V, coil power consumption
of 140... 200 mW, latching relays with 1 coil 100 mW. The IM relay
is available as through hole and surface mount type (J-Legs and Gull
Wings) and capable to switch loads up to 60 W/62,5 VA. Dielectric
strength fulfills the Bellcore requirements according GR 1089 (2,5 kV
– 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs). The IM relay is
CECC/IECQ approved and certified in accordance with IEC/EN 60950
and UL1950. Dimensions approx. 10 x 6 mm board space and
5.65 mm height.
2nd generation non polarized 2 c/o relay for telecom and various
other applications. Nominal voltage range from 3 ... 48 V, coil power
consumption from 150 .... 500 mW. The D2n relay is capable to
switch currents up to 3 A. Dielectric strength fulfills the requirements
according FCC part 68 (1,5 kV – 10 / 160 µs). Dimensions approx.
20 x10 mm board space and 11,5 mm height.
P1 Relays
Extremely sensitive, polarized 1 c/o relay with bifurcated contacts for
a wide range of applications, available as non latching or latching relay
with 1 or 2 coils. Nominal voltage range from 3 ... 24 V, coil power
consumption 65 mW, latching relays with 1 coil 30 mW. The P1 relay
is available as through hole or surface mount type and capable to
switch currents up to 1 A. Dielectric strength fulfills the requirements
according FCC part 68 (1,5 kV – 10 / 160 µs). Dimensions approx.
13 x 7,6 mm board space and 7 mm height for THT or 8 mm height for
SMT version.
P2 Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts,
available as non latching or latching relay with 1 or 2 coils. Nominal
voltage range from 3 ... 24 V, coil power consumption 140 mW,
latching relays with 1 coil 70 mW. The P2 Relay is available as through
hole or surface mount type and capable to switch currents up to 5
A. Dielectric strength fulfills the Bellcore requirements according GR
1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs).
Dimensions approx. 15 x 7,5 mm board space and 10 mm height.
W11 Relays
Low cost, non polarized 1 c/o relay for various applications. Nominal
voltage range from 3 ... 24 V, coil power consumption 450 mW,
sensitive versions 200 mW. The W11 relay is capable to switch
currents up to 3 A. Dielectric strength 1000 Vrms. Dimensions approx.
15,6 x 10,6 mm board space and 11,5 mm height.
FX Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts,
available as non latching or latching relay with 1 coil. Nominal voltage
range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the
high sensitive version, 140... 300 mW for the standard version, latching Reed Relays
relays with 1 coil 100 mW. The FX2 relay is available as through hole
type and capable to switch loads up to 60 W/62,5 VA. Dielectric
strength fulfills the Bellcore requirements according GR 1089 (2,5 kV
– 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs). The FX2 is CECC/
IECQ approved and certified in accordance with IEC/EN 60950 and
UL1950. Dimensions approx. 15 x 7,5 mm board space and 10,7 mm
height.
High sensitive, non polarized relay for telecom and various other
applications, available with 1 n/o, 2 n/o or 1c/o contacts. Nominal
voltage range from 5 ... 24 V, coil power consumption 50...280 mW
for 1 n/o and 125 ... 280 mW for 2 n/o or 1 c/o versions. Reedrelays
are available in DIP or SIL housing and capable to switch currents up to
0,5 A. Integrated diode and/or electrostatic shield optional. Dielectric
strength 1500 Vdc. Dimensions approx. 19,3 x 7 mm board space and
5 ... 7,5 mm height for DIP or 19,8 x 5 mm board space and 7,8 mm
height for SIL version.
FT2 / FU2 Relays
3rd generation non polarized, non latching 2 c/o telecom relay with
bifurcated contacts. Nominal voltage range from 3 ... 48 V, coil power
consumption 200 ... 300 mW. Most sensitive 48 V relay. Available as
through hole and surface mount type. Dielectric strength fulfills the
Bellcore requirements according GR 1089 (2,5 kV – 2 / 10 µs) and FCC
part 68 (1,5 kV – 10 / 160 µs). The FT2/FU2 is CECC/IECQ approved
and certified in accordance with IEC/EN 60950 and UL1950.
Dimensions approx. 15 x 7,5 mm board space and 10 mm height.
Cradle Relays
Extremely reliable and mature relay family of 1st generation for various
signal switching applications. Available as non polarized, polarized
/ latching and relay with AC coil. The benefit is the possibility of
combining various contact sets from 1 up to 6 poles, single and
bifurcated contacts, different contact materials with a coil voltage
range from 1,5 Vdc to 220 Vac. Cradle relays are available as dust
protected and hermetically sealed versions, with plug in or solder
terminals and are capable to switch currents up to 5 A. Forcibly
guided (linked) contact sets optional. Dielectric strength 500 Vrms.
Dimensions from approx. 19 x 24 to 19x35 mm board space and
30 mm height.
FP2 Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts,
available as non latching or latching relay with 1 or 2 coils. Nominal
voltage range from 3 ... 48 V, coil power consumption of 80 ... 260 mW
for the high sensitive version, 140... 300 mW for the standard version,
latching relays with 1 coil 100 mW.. The FP2 Relay is available as
through hole type and capable to switch loads up to
Other Relays
We offer a variety of different relay families for maintenance and
replacement purposes. These relays are up to 60 years old now, such
as Card Relay SN (V23030 / V23031 series), Small General Purpose
Relay (V23006 series), Small Polarized Relay (V23063 ... V23067
and V23163 ... V23167 series). Accessories like sockets, hold down
springs, etc. optional.
30 W/62,5 VA. Dielectric strength fulfills FCC part 68 (1,5 kV – 10 /
160 µs). The FP2 is CECC/IECQ approved. Dimensions approx.
14 x 9 mm board space and 5 mm height.
MT2 / MT4
2nd generation non polarized, non latching 2 c/o and 4 c/o telecom and
signal relay with bifurcated contacts. Nominal voltage range from 4.5 ...
48 V, coil power consumption 150/200/300/400 and
550 mW, and 300 mW (MT4). Dielectric strength fulfills the
requirements according FCC part 68 (1,5 kV – 10 / 160 µs) for both
and the Bellcore requirements according GR 1089 (2,5 kV – 2 / 10 µs)
the MT4 only.
HF3 Relay
High performance low cost RF relay with excellent RF characteristics.
Available with an impedance of 50 and 75 Ohm. Suitable for frequen-
cies up to 3 GHz. Actually smallest RF relay available combining small
size, excellent RF performance and SMD solderability. Available as non
latching or latching relay with 1 or 2 coils and a nominal coil voltage
range from 3 ... 24 V, coil power consumption 140 mW, latching relays
with 1 coil 70 mW. Dimensions 14.6 x 7.3 x 10 mm.
Dimensions MT2 approx. 20 x 10 mm board space and 11 mm height,
MT4 approx. 20 x15 mm board space and 11 mm height.
Page 8 (9)
108-98016 Rev. B
Tyco Electronics AXICOM Ltd.
Seestrasse 295 - P.O. Box 220
CH-8804 Au-Wädenswil / Switzerland
Phone +41 1 782 9111
Fax +41 1 782 9080
E-mail: axicom@tycoelectronics.com
Tyco Electronics
Paulsternstrasse 26
D-13629 Berlin / Germany
Phone +49 30 386 38573
Fax +49 30 386 38575
E-mail: axicom@tycoelectronics.com
Tyco Electronics EC Trutnov s.r.o.
Komenského 821
CZ-541 01 Trutnov / Czech Republic
E-mail: axicom@tycoelectronics.com
Tyco Electronics Corporation
POB 3608,
Harrisburg, PA 17105, USA
Phone +1 800-522-6752
Page 9 (9)
108-98016 Rev. B
0-1393824-4 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
0-1393824-5 | MACOM | Cradle Relay Accessories and Mounting | 获取价格 | |
0-1393824-8 | MACOM | Cradle Relay Accessories and Mounting | 获取价格 | |
0-1393827-1 | MACOM | Cradle Relay Accessories and Mounting | 获取价格 | |
0-1393827-2 | MACOM | Cradle Relay Accessories and Mounting | 获取价格 | |
0-1393827-3 | MACOM | Cradle Relay Accessories and Mounting | 获取价格 | |
0-1393845-4 | ETC | RELAY DPCO 12VDC | 获取价格 | |
0-1393845-5 | ETC | RELAY DPCO 24VDC | 获取价格 | |
0-1394909-2 | TE | DIESES ZEICHNUNGSDOKUMENT WIRD DU RACMHP INCORPORATED KONTROLLIERT. | 获取价格 | |
0-1394911-2 | TE | DIESES ZEICHNUNGSDOKUMENT WIRD DU RACMHP INCORPORATED KONTROLLIERT. | 获取价格 | |
0-1415030-1 | TE | Miniature Power PCB Relay PB | 获取价格 |
0-1393824-4 相关文章
- 2024-09-20
- 6
- 2024-09-20
- 9
- 2024-09-20
- 8
- 2024-09-20
- 6