LT1030CD-00 [Linear]
LINE DRIVER, PDSO14;![LT1030CD-00](http://pdffile.icpdf.com/pdf2/p00289/img/icpdf/LT1030CS-PBF_1755368_icpdf.jpg)
型号: | LT1030CD-00 |
厂家: | ![]() |
描述: | LINE DRIVER, PDSO14 驱动 光电二极管 接口集成电路 驱动器 |
文件: | 总14页 (文件大小:607K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
LT1030C
QUADRUPLE LOW-POWER LINE DRIVER
SLLS048F – APRIL 1989 – REVISED APRIL 1998
D OR N PACKAGE
(TOP VIEW)
Low Supply Voltage . . . ±5 V to ±15 V
Supply Current . . . 500 µA Typical
Zero Supply Current When Shut Down
Outputs Can Be Driven ±30 V
Output Open When Off (3-State)
10-mA Output Drive
V
V
1
2
3
4
5
6
7
14
13
12
11
10
9
CC–
IN1
CC+
STROBE
IN4
OUT1
ON/OFF
IN2
OUT4
NC
Outputs of Several Devices Can Be
Connected in Parallel
OUT2
GND
IN3
8
OUT3
Meets or Exceeds the Requirements of
ANSI EIA/TIA-232-F Specifications
NC – No internal connection
Designed to Be Interchangeable With
Linear Technology LT1030
description
The LT1030C is an EIA/TIA-232-F line driver that operates over a ±5-V to ±15-V supply-voltage range on low
supply current. The device can be shut down to zero supply current. Current limiting fully protects the outputs
from externally applied voltages of ±30 V. Since the output swings to within 200 mV of the positive supply and
to within 1 V of the negative supply, supply-voltage requirements are minimized.
A major advantage of the LT1030C is the high-impedance output state when the device is off or powered down.
This feature allows several different drivers on the same bus.
The device can be used as an EIA/TIA-232-F driver, micropower interface, or level translator, among others.
The LT1030C is characterized for operation from 0°C to 70°C.
AVAILABLE OPTIONS
PACKAGE
SMALL OUTLINE
(D)
PLASTIC DIP
(N)
LT1030CD
LT1030CN
The D package is available taped and reeled.
Add the suffix R to the device type (i.e.,
LT1030CDR).
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 1998, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
LT1030C
QUADRUPLE LOW-POWER LINE DRIVER
SLLS048F – APRIL 1989 – REVISED APRIL 1998
†
logic symbol
13
G1
EN
STROBE
ON/OFF
4
2
3
6
IN1
IN2
IN3
IN4
1
OUT1
OUT2
OUT3
OUT4
5
9
8
12
11
†
This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.
logic diagram
4
ON/OFF
13
2
STROBE
IN1
3
6
OUT1
OUT2
OUT3
OUT4
5
IN2
IN3
IN4
8
9
11
12
Terminal Functions
TERMINAL
DESCRIPTION
NAME
GND
NO.
7
Ground terminal
IN1
IN2
IN3
IN4
2
5
9
Logic inputs. INx operate properly on TTL or CMOS levels. Output valid from V = V
I
+ 2 V to 15 V. Connect to 5 V
CC–
when not used.
12
ON/OFF shuts down the entire circuit. It cannot be left open. For normally on operation, connect between 5 V and 10 V.
If V is at or near 0.8 V, significant settling time may be required.
IL
4
ON/OFF
OUT1
OUT2
OUT3
OUT4
3
6
8
Line driver outputs
11
STROBE forces all outputs low. Drive with 3 V. Strobe terminal input impedance is approximately 2 kΩ to GND. Leave
STROBE open when not used.
13
STROBE
V
V
14
1
Positive supply
Negative supply
CC+
CC–
2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
LT1030C
QUADRUPLE LOW-POWER LINE DRIVER
SLLS048F – APRIL 1989 – REVISED APRIL 1998
†
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage range, V
Supply voltage range, V
(see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 V to 15 V
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 V to –15 V
CC+
CC–
Input voltage range, logic inputs, V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V
Input voltage range at ON/OFF, V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 V to 12 V
to 25 V
I
CC–
I
Output voltage range, V (any output) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V
– 30 V to V
+ 30 V
O
CC+
CC–
Duration of output short circuit to ±30 V at (or below) 25°C (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . Unlimited
Package thermal impedance, θ (see Note 3): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127°C/W
JA
N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78°C/W
Storage temperature range, T
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C
stg
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values, except differential voltages, are with respect to GND.
2. The output may be shorted to either supply. Temperature and/or supply voltages must be limited to ensure that the maximum
dissipation rating is not exceeded.
3. The package thermal impedance is calculated in accordance with JESD 51, except for through-hole packages, which use a trace
length of zero.
recommended operating conditions
MIN
5
MAX
15
UNIT
V
Supply voltage, V
Supply voltage, V
CC+
CC–
–5
2
–15
15
V
High-level input voltage, V (see Note 4)
IH
V
Low-level input voltage, V (see Note 4)
IL
0.8
70
V
Operating free-air temperature, T
0
°C
A
NOTE 4: These V and V specifications apply only for inputs IN1–IN4. For operating levels for ON/OFF, see Figure 2.
IH IL
electrical characteristics over operating free-air temperature range, V
otherwise noted)
= ±5 V to ±15 V (unless
CC±
‡
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX
UNIT
V
V
V
Maximum positive peak output voltage swing
Maximum negative peak output voltage swing
High-level input current
I
I
= –2 mA,
= 2 mA,
T
= 25°C
= 25°C
= 25°C
= 25°C
V
–0.3
CC+
V
–0.1
+0.9
OM+
O
A
CC+
T
A
V
V
+1.4
CC–
V
OM–
O
CC–
I
I
V ≥ 2 V,
T
A
2
–10
–0.1
30
20
µA
µA
IH
I
Low-level input current
V ≤ 0.8 V,
T
A
–20
–10
65
IL
I
V = 0
I
II
µA
Input current, ON/OFF
Output current
V = 5 V
I
I
I
I
T
= 25°C
5
12
mA
µA
µA
O
A
V
= ±15 V, T = 25°C,
A
ON/OFF at 0.4 V
O
Off-state output current
Supply current (all outputs low)
±2
±100
OZ
CC
V ≥ at 2.4 V,
I
O
= 0
500
1000
10
I
ON/OFF at 0.4 V
ON/OFF at 0.1 V
I
Off-state supply current
µA
CC(off)
10
150
‡
All typical values are at V
= ±12 V, T = 25°C.
A
CC±
3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
LT1030C
QUADRUPLE LOW-POWER LINE DRIVER
SLLS048F – APRIL 1989 – REVISED APRIL 1998
operating characteristics, V
= ±5 V to ±15 V, T = 25°C
A
CC±
†
PARAMETER
TEST CONDITIONS
= 3 kΩ, = 51 pF
MIN TYP
MAX
UNIT
SR
Driver slew rate
R
C
4
15
30
V/µs
L
L
†
All typical values are at V
= ±12 V, T = 25°C.
CC±
A
TYPICAL CHARACTERISTICS
MAXIMUM PEAK OUTPUT VOLTAGE
ON/OFF TERMINAL VOLTAGE
vs
vs
OUTPUT CURRENT
FREE-AIR TEMPERATURE
1.8
V
CC+
V
R
= ±12 V
CC±
= 3 kΩ
V
V
–0.2
–0.4
L
CC+
1.6
1.4
1.2
1
Output High
CC+
Min On Voltage
V
V
+1.4
+1.2
CC–
CC–
Max Off Voltage
V
+1
CC–
CC–
CC–
I
O
< 200 µA
0.8
0.6
0.4
Output Low
V
V
+0.8
+0.6
V
V
+0.4
+0.2
CC–
CC–
Max Off Voltage
< 20 µA
V
T
A
= ±12 V
±4
CC±
0.2
I
O
CC–
= 25°C
V
GND
±2
±3
±5
±1
0
0
10
20
30
40
50
60
70
I
O
–Output Current – mA
T
A
– Free-Air Temperature – °C
Figure 1
Figure 2
4
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
LT1030C
QUADRUPLE LOW-POWER LINE DRIVER
SLLS048F – APRIL 1989 – REVISED APRIL 1998
TYPICAL CHARACTERISTICS
MAXIMUM PEAK OUTPUT VOLTAGE
ON/OFF TERMINAL CURRENT
vs
ON/OFF TERMINAL VOLTAGE
vs
FREE-AIR TEMPERATURE
V
140
120
100
CC+
V
= ±12 V
CC±
V
V
–0.2
T = 25°C
A
CC+
I
O
= 1 mA
I
I
= 5 mA
O
–0.4
+1.4
+1.2
CC+
CC–
80
60
40
20
0
V
= –5 mA
O
V
CC–
V
+1
CC–
I
O
= –1 mA
50
V
+0.8
+0.6
CC–
CC–
V
CC±
= ±12 V
V
–20
0
10
20
30
40
60
70
0
2.5
5
7.5
10
12.5
15
T
A
– Free-Air Temperature – °C
ON/OFF Terminal Voltage – V
Figure 3
Figure 4
TYPICAL CHARACTERISTICS
OUTPUT CURRENT
vs
FREE-AIR TEMPERATURE
OFF-STATE OUTPUT CURRENT
vs
FREE-AIR TEMPERATURE
30
27.5
25
–1
V
CC±
= ±12 V
V
V
= ±12 V
= –25 V
CC±
O
Sinking
22.5
20
–0.1
17.5
15
Sourcing
10
–0.01
0
20
30
40
50
60
70
25
30
35
T
A
40 45
– Free-Air Temperature – °C
50
55
60
65 70
T
A
– Free-Air Temperature – °C
Figure 5
Figure 6
5
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
LT1030C
QUADRUPLE LOW-POWER LINE DRIVER
SLLS048F – APRIL 1989 – REVISED APRIL 1998
TYPICAL CHARACTERISTICS
OFF-STATE SUPPLY CURRENT
vs
SUPPLY CURRENT
vs
TOTAL SUPPLY VOLTAGE
FREE-AIR TEMPERATURE
0.1
5
4.5
4
V
= ±12 V
T
A
= 25°C
CC±
ON/OFF at 0.4 V
0.07
0.05
0.03
3.5
3
All Outputs High
2.5
2
1.5
1
All Outputs Low
0.5
0
0.01
45
50
55
60
65
70
10 12.5 15 17.5 20 22.5
25 27.5 30
T
A
– Free-Air Temperature –°C
|V – V | – Total Supply Voltage – V
CC+ CC–
Figure 7
Figure 8
TYPICAL CHARACTERISTICS
SUPPLY CURRENT
vs
FREE-AIR TEMPERATURE
SLEW RATE
vs
FREE-AIR TEMPERATURE
4
17
16
V
CC±
= ±12 V
V
CC±
= ±12 V
3.5
3
R
= 3 kΩ
L
L
C
= 51 pF
All Outputs High
2.5
2
Falling
15
1.5
1
Rising
14
13
All Outputs Low
0.5
0
0
10
20
30
40
50
60
70
0
10
20
30
40
50
60
70
T
A
– Free-Air Temperature – °C
T
A
– Free-Air Temperature – °C
Figure 9
Figure 10
6
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
LT1030C
QUADRUPLE LOW-POWER LINE DRIVER
SLLS048F – APRIL 1989 – REVISED APRIL 1998
APPLICATION INFORMATION
forward biasing the substrate
As with other bipolar integrated circuits, forward biasing the substrate diode can cause problems. The LT1030C
draws high current from V to GND when V is open circuited or pulled above ground. Connecting a diode
CC+
CC–
from V
to GND (if possible) prevents the high-current state. Any low-cost diode can be used (see Figure 11).
CC–
LT1030C
1
14
1N4001
7
8
Figure 11. Connecting a Diode From V
to GND
CC–
7
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
PACKAGE OPTION ADDENDUM
www.ti.com
21-May-2007
PACKAGING INFORMATION
Orderable Device
LT1030CD
Status (1)
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
Package Package
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Qty
Type
Drawing
SOIC
D
14
14
14
14
14
14
14
14
50 Green (RoHS & CU NIPDAU Level-2-260C-1 YEAR
no Sb/Br)
LT1030CDE4
LT1030CDG4
LT1030CDR
SOIC
SOIC
SOIC
SOIC
SOIC
PDIP
PDIP
D
D
D
D
D
N
N
50 Green (RoHS & CU NIPDAU Level-2-260C-1 YEAR
no Sb/Br)
50 Green (RoHS & CU NIPDAU Level-2-260C-1 YEAR
no Sb/Br)
2500 Green (RoHS & CU NIPDAU Level-2-260C-1 YEAR
no Sb/Br)
LT1030CDRE4
LT1030CDRG4
LT1030CN
2500 Green (RoHS & CU NIPDAU Level-2-260C-1 YEAR
no Sb/Br)
2500 Green (RoHS & CU NIPDAU Level-2-260C-1 YEAR
no Sb/Br)
25
Pb-Free
(RoHS)
CU NIPDAU N / A for Pkg Type
LT1030CNE4
25
Pb-Free
(RoHS)
CU NIPDAU N / A for Pkg Type
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
14-Jul-2012
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
B0
K0
P1
W
Pin1
Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant
(mm) W1 (mm)
LT1030CDR
SOIC
D
14
2500
330.0
16.4
6.5
9.0
2.1
8.0
16.0
Q1
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
14-Jul-2012
*All dimensions are nominal
Device
Package Type Package Drawing Pins
SOIC 14
SPQ
Length (mm) Width (mm) Height (mm)
367.0 367.0 38.0
LT1030CDR
D
2500
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which
have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such
components to meet such requirements.
Products
Applications
Audio
www.ti.com/audio
amplifier.ti.com
dataconverter.ti.com
www.dlp.com
Automotive and Transportation www.ti.com/automotive
Communications and Telecom www.ti.com/communications
Amplifiers
Data Converters
DLP® Products
DSP
Computers and Peripherals
Consumer Electronics
Energy and Lighting
Industrial
www.ti.com/computers
www.ti.com/consumer-apps
www.ti.com/energy
dsp.ti.com
Clocks and Timers
Interface
www.ti.com/clocks
interface.ti.com
logic.ti.com
www.ti.com/industrial
www.ti.com/medical
Medical
Logic
Security
www.ti.com/security
Power Mgmt
Microcontrollers
RFID
power.ti.com
Space, Avionics and Defense
Video and Imaging
www.ti.com/space-avionics-defense
www.ti.com/video
microcontroller.ti.com
www.ti-rfid.com
www.ti.com/omap
OMAP Applications Processors
Wireless Connectivity
TI E2E Community
e2e.ti.com
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2012, Texas Instruments Incorporated
相关型号:
©2020 ICPDF网 联系我们和版权申明