CHM-27 [LUMINUS]
COB Arrays White LED;型号: | CHM-27 |
厂家: | Luminus |
描述: | COB Arrays White LED |
文件: | 总12页 (文件大小:1123K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
CHM-27 Product Datasheet
CHM-27 COB Arrays
White LED
Features:
• High lumen output and efficacy typical
Table of Contents
• Over 11,000 lm, 119 LPW @ 3000K, 25ºC
• Over 12,000 lm, 130 LPW @ 5000K, 25ºC
Technology Overview . . . . . .2
• CCT range 2700K, 3000K, 3500K, 4000K, 5000K and 6500K
• 80 or 90 CRI min. up to 95 min. in warm white
• 3 SDCM color binning accuracy
Test Specifications . . . . . . . . .2
Chromaticity Bins . . . . . . . . . .3
Part number nomenclature.4
• Excellent optical emission uniformity and color over angle consistency
• Exceptional long term color stability
Ordering part number and flux
spec . . . . . . . . . . . . . . . . . . . . . . 5
• Superior thermal conductivity for uniform heat spreading
• Environmentally friendly: RoHS and REACh compliant
• UL recognized, file # E465703.
Operating Characteristics . .7
Optical and Electrical Character-
istics. . . . . . . . . . . . . . . . . . . . . . .8
Spectra . . . . . . . . . . . . . . . . . . . .9
Mechanical Dimensions . . 10
Packaging Information . . . 11
Handling Notes . . . . . . . . . . 12
Applications
• Architectural and Specialty
• Parking Lot and Area Lighting
• Tunnel Lighting
• Street Lighting
1
PDS-002481 Rev 04
© 2018 Luminus Devices, Inc. - All Rights Reserved
CHM-27 Product Datasheet
Technology Overview
Luminus Chip-on-Board (COB) LED series offers a complete lighting class solution designed for high performance illumination
applications. The selection covers a wide lumen range from less than 400lm to over 10,000lm, all major color temperatures and can
deliver color rendering greater than 97 at 2700K and 3000K and R9 equal to 95. These breakthroughs allow illumination engineers and
designers to develop lighting solutions with maximum efficacy, brightness and overall quality.
Reliability
UL Recognized Compliance
Designed from the ground up, the Luminus COB LED is one of
the most reliable light sources in the world today. Having
passed a rigorous suite of environmental and mechanical stress
tests, including mechanical shock, vibration, temperature
cycling and humidity. Only then are the devices qualified for
use in a wide range of lighting application including some of the
most demanding commercial applications. Delivered with fully
qualified LM80 test data and TM21 lifetime results that certify
lumen maintenance at 35,000 hours or more, Luminus COB
LEDs are ready for the toughest challenges.
Luminus COB arrays are tested in accordance with ANSI/UL 8750
to ensure safe operation for their intended applications.
REACh & RoHS Compliance
All LED products manufactured by Luminus are REACh and
RoHS compliant and free of hazardous materials, including lead
and mercury.
Understanding Luminus COB LED Test Specifications
Every Luminus LED is fully tested to ensure it meets the high quality standards customers have come to expect from Luminus’products.
Traceability
Chromaticity Bin Range
Each Luminus COB LED is marked with a 2D bar code that
contains a unique serial number. With this serial number,
Luminus has the ability to provide customers with actual test
data measurements for a specific LED. In addition, the 2D bar
code is linked to manufacturing date codes that enables
traceability of production processes and materials.
Chromaticity binning delivers color consistency for every order.
Standard products are delivered with a 3-step MacAdam ellipse.
This ensures color performance matching in the application. For
the most demanding application, Luminus is one of only a few
companies that can provide a 2-step ellipse bin. These tightly
controlled, small distribution bins provide customers
predictable, repeatable colors.
Testing Temperature
Luminus COB products are measured at temperatures typical for
the LED operating in the fixture. Each device is tested at 85ºC
junction temperature eliminating the need to scale data sheet
specifications to real world situations.
2
PDS-002481 Rev 04
© 2018 Luminus Devices, Inc. - All Rights Reserved
CHM-27 Product Datasheet
Chromaticity Bin Structure
Chromaticity Bins: 1931 CIE Curve
0.46
ANSI C78.377-2008
3-step Ellipse
5-step Ellipse
2700K
0.44
3000K
3500K
0.42
Black Body
4000K
0.4
5000K
0.38
0.36
6500K
0.34
0.32
0.3
0.3
0.32
0.34
0.36
0.38
0.4
0.42
0.44
0.46
0.48
0.5
CIE x
CHM-27 White Chromaticity Bins
The following tables describe the ANSI bin center points, the orientation angle for the MacAdam ellipse (θ °), and the maximum radii for
the ellipses. The ANSI Bin is provided for reference.
Center Point
Angle
θ (°)
3-step Bin
5-step Bin
CCT
CIEx
CIEy
a
b
a
b
2700K
3000K
3500K
4000K
5000K
6500K
0.4578
0.4338
0.4073
0.3818
0.3447
0.3123
0.4101
0.403
53.7
0.0081
0.0042
0.00408
0.00414
0.00402
0.00354
0.00285
53.2
54
0.00834
0.00927
0.00939
0.00822
0.00669
0.3917
0.3797
0.3553
0.3282
53.7
59.6
58.57
0.0137
0.0059
0.01115
0.00475
*Note: Luminus maintains a +/- 0.005 tolerance on chromaticity (CIEx and CIEy) measurements.
3
PDS-002481 Rev 04
© 2018 Luminus Devices, Inc. - All Rights Reserved
CHM-27 Product Datasheet
Product Ordering and Shipping Part Number Nomenclature
All CHM-27 products are packaged and labeled with part numbers as outlined in the table on page 5. When shipped, each package will
contain only a single flux and chromaticity bin. The part number designation is as follows:
CHM
27
NN
XX
36
QQPP
FG
W
Light Emitting
Surface Diameter
Color
Temperature
Color Render-
ing Index (CRI) (typical)
Voltage
Package
Configurator
Chromaticity
Bin
Product Family
Flux Bin
Color
See Note 1
Below
CHM: Chip on
Board
26.5: LES
Diameter (mm)
CRI See Table
Volts
AA00
(Basic package)
See page 3 for
bins
Lumens
Below
Note 1: NN nomenclature corresponds to the following:
27 = 2700K
30 = 3000K
35 = 3500K
40 = 4000K
50 = 5000K
65 = 6500K
Note 2: AA is standard package configurator
AB is an alternative
Color Temperature, CRI and R9 Values
Color Temperatures
XX Value
CRI
>70
>80
>90
>95
R9
-
4000K, 5000K, 6500K
70
80
90
95
2700K, 3000K, 3500K, 4000K, 5000K, 6500K
2700K, 3000K, 3500K, 4000K
2700K, 3000K
>0
>50
>90
Note:
Luminus part numbers may be accompanied by prefixes or suffixes. The most common is the“Rev01”suffix indicating a part is fully released
and carries a full warranty. These additional characters may appear on shipping labels, packing slips and invoices. In all cases the basic part
number described above will always be included.
4
PDS-002481 Rev 04
© 2018 Luminus Devices, Inc. - All Rights Reserved
CHM-27 Product Datasheet
CHM-27 Part Numbers (AA00)
The following tables describe products with typical flux and minimum flux measured at 2,700mA and specified at Tj = 85ºC. The values at
25ºC are calculated and shown for reference only.
Color
Output Flux (lm) Reference Rendering
Index
Ordering Part Number
3-step MacAdam Ellipse
CCT
Typ.
Typ.
(85ºC)
Min.
(85ºC)
(calculated)
CRI (min.)
(25ºC)
9,730
7,585
7,140
9,240
7,206
6,785
10,700
8,345
7,855
80
90
95
CHM-27-27-80-36-AA00-F2-3
CHM-27-27-90-36-AA00-F2-3
CHM-27-27-95-36-AA00-F2-3
2700K
10,270
8,750
8,085
9,755
8,310
7,680
11,300
9,625
8,895
80
90
95
CHM-27-30-80-36-AA00-F2-3
CHM-27-30-90-36-AA00-F2-3
CHM-27-30-95-36-AA00-F2-3
3000K
3500K
4000K
10,620 10,090
9,155 8,700
11,685
10,070
80
90
CHM-27-35-80-36-AA00-F2-3
CHM-27-35-90-36-AA00-F2-3
11,535 10,955
10,985 10,435
12,690
12,085
10,420
70
80
90
CHM-27-40-70-36-AA00-F2-3
CHM-27-40-80-36-AA00-F2-3
CHM-27-40-90-36-AA00-F2-3
9,470
9,000
Color
Rendering
Index
Output Flux (lm) Reference
Typ.
Part Number
CCT
Typ.
Min..
(calculated)
CRI (min.)
5-step MacAdam Ellipse
3-step MacAdam Ellipse
(85ºC) (85ºC)
(25ºC)
11,810 11,220
11,430 10,860
12,990
12,575
70
80
CHM-27-50-70-36-AA00-F2-5
CHM-27-50-80-36-AA00-F2-5
CHM-27-50-70-36-AA00-F2-3
CHM-27-50-80-36-AA00-F2-3
5000K
6500K
11,760 11,170
11,200 10,640
12,935
12,320
70
80
CHM-27-65-70-36-AA00-F2-5
CHM-27-65-80-36-AA00-F2-5
CHM-27-65-70-36-AA00-F2-3
CHM-27-65-80-36-AA00-F2-3
*Note: Luminus maintains a +/- 6% tolerance on flux measurements.
Luminus maintains a +/- 2% tolerance on CRI measurements.
5
PDS-002481 Rev 04
© 2018 Luminus Devices, Inc. - All Rights Reserved
CHM-27 Product Datasheet
CHM-27 Part Numbers (AB00)
The following tables describe products with typical flux and minimum flux measured at 2,700mA and specified at Tj = 85ºC. The values at
25ºC are calculated and shown for reference only.
Color
Output Flux (lm) Reference Rendering
Index
Ordering Part Number
3-step MacAdam Ellipse
CCT
Typ.
Typ.
(85ºC)
Min.
(85ºC)
(calculated)
CRI (min.)
(25ºC)
9,730
7,585
7,140
9,240
7,206
6,785
10,700
8,345
7,855
80
90
95
CHM-27-27-80-36-AB00-F2-3
CHM-27-27-90-36-AB00-F2-3
CHM-27-27-95-36-AB00-F2-3
2700K
10,270
8,750
8,085
9,755
8,310
7,680
11,300
9,625
8,895
80
90
95
CHM-27-30-80-36-AB00-F2-3
CHM-27-30-90-36-AB00-F2-3
CHM-27-30-95-36-AB00-F2-3
3000K
3500K
4000K
10,620 10,090
9,155 8,700
11,685
10,070
80
90
CHM-27-35-80-36-AB00-F2-3
CHM-27-35-90-36-AB00-F2-3
11,535 10,955
10,985 10,435
12,690
12,085
10,420
70
80
90
CHM-27-40-70-36-AB00-F2-3
CHM-27-40-80-36-AB00-F2-3
CHM-27-40-90-36-AB00-F2-3
9,470
9,000
Color
Rendering
Index
Output Flux (lm) Reference
Typ.
Part Number
CCT
Typ.
Min..
(calculated)
CRI (min.)
5-step MacAdam Ellipse
3-step MacAdam Ellipse
(85ºC) (85ºC)
(25ºC)
11,810 11,220
11,430 10,860
12,990
12,575
70
80
CHM-27-50-70-36-AB00-F2-5
CHM-27-50-80-36-AB00-F2-5
CHM-27-50-70-36-AB00-F2-3
CHM-27-50-80-36-AB00-F2-3
5000K
6500K
11,760 11,170
11,200 10,640
12,935
12,320
70
80
CHM-27-65-70-36-AB00-F2-5
CHM-27-65-80-36-AB00-F2-5
CHM-27-65-70-36-AB00-F2-3
CHM-27-65-80-36-AB00-F2-3
*Note: Luminus maintains a +/- 6% tolerance on flux measurements.
Luminus maintains a +/- 2% tolerance on CRI measurements.
6
PDS-002481 Rev 04
© 2018 Luminus Devices, Inc. - All Rights Reserved
CHM-27 Product Datasheet
CHM-27 Operating Characteristics1
Optical and Electrical Characteristics
Parameter
Forward Current2
Symbol
Minimum
31.5
Typical
2,640
35
Maximum
4,000
37.5
Unit
mA
V
If
Forward Voltage3
Vf
Power
92.4
146
W
Operating Case Temperature4
Light Emitting Surface Diameter
Thermal Resistance (junction-to-case)
Junction Temperature
Viewing Angle
Tc
LES
Qjc
Tj
105
ºC
26.5
0.16
mm
ºC/W
ºC
140
120
Degree
Note 1: Ratings are based on operation at a constant junction temperature Tj = 85ºC.
Note 2: To prevent damage refer to operating conditions and derating curves for appropriate maximum operating conditions
Note 3: Forward voltage is rated at typical forward current. For voltage at different forward currents, refer to the voltage versus current performance graphs.
Note 4: COB LEDs are designed for operation to a minimum of 20% of the typical forward current value. Operation at currents lower than this value will not
harm the device but may result in uneven light emission across the LES surface.
Note 5: Luminus retains the right to change any specifications without prior notice. Please refer to the company web site for the latest data sheet revision
Note 6: Caution must be taken not to stare at the light emitted from these LEDs. Under special circumstances, the high intensity could damage the eye.
7
PDS-002481 Rev 04
© 2018 Luminus Devices, Inc. - All Rights Reserved
CHM-27 Product Datasheet
CHM-27 Optical & Electrical Characteristics
Relative Output Flux vs. Forward Current @ 85ºC
Forward Current vs. Forward Voltage @ 85ºC
160%
4000
3500
3000
2500
2000
1500
1000
140%
120%
100%
80%
60%
40%
20%
0%
1000
1500
2000
2500
3000
3500
4000
33
33.5
34
34.5
35
35.5
36
36.5
Forward Current (mA)
Forward Voltage (V)
Relative Output Flux vs. Junction Temperature
Change in Voltage vs. Junction Temperature
120.0%
40
38
36
34
32
30
100.0%
80.0%
60.0%
40.0%
20.0%
0.0%
5
15
25
35
45
55
65
75
85
95
105
5
15
25
35
45
55
65
75
85
95
105
Junction Temperature (ºC)
Junction Temperature (ºC)
Change in CIEx vs. Junction Temp. (3000K, 80CRI)
Change in CIEy vs. Junction Temp. (3000K, 80CRI)
0.02
0.02
0.01
0
0.01
0
-0.01
-0.02
-0.01
-0.02
5
15
25
35
45
55
65
75
85
95
105
5
15
25
35
45
55
65
75
85
95
105
Junction Temperature (ºC)
Junction Temperature (ºC)
8
PDS-002481 Rev 04
© 2018 Luminus Devices, Inc. - All Rights Reserved
CHM-27 Product Datasheet
CHM-27 Optical & Electrical Characteristics
Typical Spectrum
120.00%
100.00%
80.00%
60.00%
40.00%
20.00%
0.00%
Warm White
Neutral White
Cool White
3000K-90CRI
3000K-97CRI
400
450
500
550
600
650
700
750
800
-20.00%
Wavelength (nm)
Typical Polar Radiation Pattern
Typical Angular Radiation Pattern
120%
100%
80%
60%
40%
20%
0%
-80
-60
-40
-20
0
20
40
60
80
Anglular Displacement (Degrees)
9
PDS-002481 Rev 04
© 2018 Luminus Devices, Inc. - All Rights Reserved
CHM-27 Product Datasheet
Mechanical Dimensions (AA00)
0.87±0.15
.034±.006
27.90
1.098
2X 2.40
.094
2X 13.95
.549
HOLES
1.37
.054
2X 2.40
.094
2X 3.26
.128
2X 3.26
.128
2X 13.95
27.90
.549
1.098
HOLES
31.50±0.25
1.240±.010
26.50
1.043
LES
1.20
.047
TcPOINT
28.00
1.102
RING O.D.
0.50±0.10
.020±.004
RING HEIGHT
31.50±0.25
1.240±.010
Mechanical Dimensions (AB00)
31.50±0.25
1.240±.010
2X 3.02
.119
0.87±0.15
.034±.006
2X 2.40
.094
2XR 1.60
.063
1.37
.054
2X 2.40
.094
2X 2.55
.100
4XR 0.50
.020
26.50 LES
1.043
2X 3.02
.119
31.50±0.25
1.240±.010
27.90
1.098
1.20
.047
TcPOINT
28.00
1.102
RING O.D.
2X 13.95
.549
HOLES
2X 13.35
.526
0.50±0.10
.020±.004
RING HEIGHT
2X 13.95
.549
HOLES
2X 13.35
.526
6XR 0.20
.008
27.90
1.098
10
PDS-002481 Rev 04
© 2018 Luminus Devices, Inc. - All Rights Reserved
CHM-27 Product Datasheet
Shipping Container
100 pcs per box
Each bag is boxed for
easier storage/ stacking
Trays are sealed in
an anti-static bag
20 pcs per tray
5 trays are stacked together
with separate cover
Label
Luminus Label Model:
Luminus Devices Inc
XXXXXX-XX-XX (Manufacturer Part Number & Bin Kits)
Rev XX
Bar code
Bar code
XXX-XX-XX-XX-XX-XXXX-XX-X (Customer Part Number)
Qty: XX
Bar code
XXXXXXXXXXXXXX (Box ID)
Bar code
11
PDS-002481 Rev 04
© 2018 Luminus Devices, Inc. - All Rights Reserved
CHM-27 Product Datasheet
Handling Notes for Luminus COBs
Luminus products are designed for robust performance in general lighting application. However, care must be taken when handling and
assembling the LEDs into their fixtures. To avoid damaging Luminus COBs please follow these guide lines.
The following is an overview of the application notes detailing some of the practices to follow when working with these devices. More
detailed information is available on the Luminus web site at www.luminus.com.
General Handling
Electrical Contact
Devices are made to be lifted or carried with tweezers on two
adjacent corners opposite the contact pads. At no time should
the devices be handled by or should anything come in contact
with the light emitting surface (LES) area. This area includes the
yellow colored circular area and the ring surrounding it. There
are electrical connections under the LES which if damaged will
cause the device to fail.
Luminus COBs are designed with contact pads on their top
surface. These pads are clearly marked with + and – polarity.
Wires can be soldered to the contact pads for electrical
connections or other solderless connector products are
available.
If wires are being soldered to the COB product, we recommend
attaching these wires prior to mounting the devices to a heat
sink. Please contact Luminus for specific recommendations on
how to solder wires if not familiar with the standard practice.
Luminus can also offer design recommendations for jigs to
allow easily soldering multiple products in rapid succession.
In addition, the ring frame itself should not be used for moving,
lifting or carrying the device. Also do not attach any optics or
mechanical holders to the ring as it is not capable to handle the
mechanical stress.
Static Electricity
Chemical Compatibility
Luminus COBs are electronic devices which can be damaged by
electrostatic discharge (ESD). Please use appropriate measures
to assure the devices do not experience ESD during their
handling and or storage. ESD protection guidelines should be
used at all times when working with Luminus COBs.
The resin material used to form the LES can getter hydrocarbons
from the surrounding environment. As a results, certain
chemical compounds are not recommended for use with the
Luminus products. Use of these compounds can cause damage
to the light output of the device and may permanently damage
the device. Please refer to www.luminus.com for a list of the
compounds not recommended for use with the Luminus COB
products.
Storage: Luminus products are delivered in ESD shielded bags
and should be stored in these bags until used.
Assembly: Individuals handling Luminus COBs during assembly
should be trained in ESD protection practices. Assemblers
should maintain constant conductive contact with a path to
ground by means of a wrist strap, ankle straps, mat or other ESD
protection system.
Thermal Interface Material (TIM)
Proper thermal management is critical for successful operation
of any LED system. Excess operating temperature can reduce
the light output of the device. And excessive heating can cause
permanent damage to the device. Proper TIM material is a
crucial component for effective heat transfer away from the LED
during normal operation. Please refer to www.luminus.com for
specific recommendations for TIM solutions.
Transporting: When transporting the devices from one
assembly area to another, ESD shielded carts and carriers should
be used.
12
PDS-002481 Rev 04
© 2018 Luminus Devices, Inc. - All Rights Reserved
相关型号:
©2020 ICPDF网 联系我们和版权申明