LXZ1-5770_技术文档

ILLUMINATION

LUXEON Z

Industry’s smallest high power emitter

for use in close-packed applications

requiring an undomed solution

LUXEON Z is a high power 1.3mm x 1.7mm LED that enables never before

seen color consistency, luminance, ﬂux density and design ﬂexibility for

lighting solutions. LUXEON Z is undomed, a feature that provides un-

matched optical ﬂexibility for precise beam angle control. Tested and

binned at application conditions 85°C and available in 3- and 5-step

MacAdam ellipse color bins. LUXEON Z emitters are an ideal choice for

indoor and outdoor light sources requiring superior beam angles, higher

eﬃcacy and lower costs.

FEATURES AND BENEFITS

PRIMARY APPLICATIONS

1.3mm x 1.7mm micro footprint enables a high degree of design ﬂexibility

Undomed design allows precise optical control

Architectural

Downlights

1A max drive current allows for more ﬂux per LED

3- and 5-step MacAdam ellipse color binning for superior Quality of Light

Indoor Area Lighting

Lamps

Outdoor

Specialty Lighting

Spotlights

No. E352519

Table of Contents

General Product Information ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 2

Product Test Conditions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Lumen Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Performance Characteristics ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 3

Product Selection Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Electrical and Thermal Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Absolute Maximum Ratings ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 4

Characteristic Curves ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 4

Spectral Power Distribution Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Forward Current Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Radiation Pattern Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Product Bin and Labeling Deﬁnitions ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 9

Decoding Product Bin Labeling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Luminous Flux Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Color Bin Deﬁnition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Forward Voltage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Mechanical Dimensionsꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 11

Reﬂow Soldering Guidelines ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 12

JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Packaging Informationꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 14

Pocket Tape Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Reel Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

i

General Product Information

Product Test Conditions

LUXEON Z LEDs are tested and binned with a DC drive current of 500mA at a junction temperature, T_j, of 85ºC.

Part Number Nomenclature

Part numbers for LUXEON Z follow the convention below:

L X Z 1 – A A B B – C

Where:

A A

–

designates nominal ANSI CCT (27=2700K, 30=3000K, 35=3500K, 40=4000K, 50=5000K,

57=5700K, 65=6500K RB=Royal Blue)

B B

C

–

designates minimum CRI (65=65CRI, 70=70CRI, 80=80CRI)

designates SDCM (3=3 SDCM, 5=5 SDCM).

Therefore, the following part number is used for a LUXEON Z 3000K, 80 CRI, 5 SDCM :

L X Z 1 – 3 0 8 0 – 5

Lumen Maintenance

Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the long-

term performance of this product.

Environmental Compliance

Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON Z is

compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the

RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted

materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated

diphenyl ethers (PBDE).

2

Performance Characteristics

Product Selection Guide

Table 1ꢀ Product performance of LUXEON Z at 500mA and 700mA, T_j=85ºCꢀ

LUMINOUS FLUX ^[1](lm)

TYPICAL

LUMINOUS

TYPICAL

LUMINOUS

FLUX (lm)

TYPICAL

LUMINOUS

NOMINAL

CCT

MINIMUM

CRI ^{[1, 2]}

PART NUMBER

EFFICACY (lm/W)

MINIMUM

TYPICAL

500mA

154

700mA

6500K

4000K

5000K

5700K

2700K

3000K

3500K

65

70

80

140

120

130

140

100

110

120

110

96

197

172

189

195

147

159

166

99

86

95

98

74

80

83

LXZ1-6565

LXZ1-4070

LXZ1-5070

LXZ1-5770

LXZ1-2780-y

LXZ1-3080-y

LXZ1-3580-y

LXZ1-4080-y

134

148

106

109

82

152

115

124

89

124

89

4000K

130

93

Notes for Table 1:

1. Lumileds maintains a tolerance of ±2 on CRI and ±6.5% on luminous ﬂux measurements.

2. Typical CRI is approximately 2 points higher than the minimum CRI speciﬁed, but this is not guaranteed.

Optical Characteristics

Table 2ꢀ Optical characteristics for LUXEON Z at 500mA, T_j=85°Cꢀ

PART NUMBER

TYPICAL TOTAL INCLUDED ANGLE ^[1]

TYPICAL VIEWING ANGLE ^[2]

LXZ1-xxxx-y

LXZ1-xxxx

160°

120°

Notes for Table 2:

1. Total angle at which 90% of total luminous ﬂux is captured.

2. Viewing angle is the oﬀ axis angle from the LED centerline where the luminous intensity is ½ of the peak value.

Electrical and Thermal Characteristics

Table 3ꢀ Electrical and thermal characteristics for LUXEON Z at 500mA, T_j=85°Cꢀ

FORWARD VOLTAGE ^[1](V_f)

PART NUMBER

TYPICAL TEMPERATURE

COEFFICIENT OF FORWARD

VOLTAGE (mV/°C) ^[2]

TYPICAL THERMAL

RESISTANCE — JUNCTION

TO SOLDER PAD (°C/W)

MINIMUM

TYPICAL

MAXIMUM

LXZ1-xxxx-y

LXZ1-xxxx

2.5

2.8

3.25

-1.6

6

Notes for Table 3:

1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.

2. Measured between 25°C and 85°C.

3

Absolute Maximum Ratings

Table 4ꢀ Absolute maximum ratings for LUXEON Zꢀ

PARAMETER

MAXIMUM PERFORMANCE

DC Forward Current^{[1, 2]}

Peak Pulsed Forward Current^{[1, 3]}

LED Junction Temperature^[1](DC & Pulse)

ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012)

Operating Case Temperature^[1]

LED Storage Temperature

1000mA

1200mA

135°C

Class 3B

-40°C to 135°C

Soldering Temperature

JEDEC 020c 260°C

Allowable Reﬂow Cycles

3

Reverse Voltage (V_reverse

)

LUXEON LEDs are not designed to be driven in reverse bias

Notes for Table 4:

1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature.

2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” are acceptable if the following conditions are met:

– The frequency of the ripple current is 100Hz or higher

– The average current for each cycle does not exceed the maximum allowable DC forward current

– The maximum amplitude of the ripple does not exceed the maximum peak pulsed forward current

3. At 10% duty cycle with pulse of 10ms.

Characteristic Curves

Spectral Power Distribution Characteristics

Figure 1a: Typical normalized power vs. wavelength for LXZ1-xx65 at 500mA, T_j=85ºCꢀ

4

Figure 1b: Typical normalized power vs. wavelength for LXZ1-xx70 at 500mA, T_j=85ºCꢀ

Figure 1c: Typical normalized power vs. wavelength for LXZ1-xx80 at 500mA, T_j=85ºCꢀ

5

Light Output Characteristics

Figure 2: Typical normalized light output vs. junction temperature for LXZ1-xxxx at 500mA.

Figure 3: Typical normalized light output vs. forward current for LXZ1-xxxx at T_j=85ºCꢀ

6

Forward Current Characteristics

Figure 4: Typical forward current vs. forward voltage for LXZ1-xxxx at T_j=85ºCꢀ

Radiation Pattern Characteristics

Figure 5: Typical radiation pattern for LXZ1-xxxx at 500mA, T_j=85ºCꢀ

7

Figure 6: Typical polar radiation pattern for LXZ1-xxxx at 500mA, T_j=85ºCꢀ

8

Product Bin and Labeling Deﬁnitions

Decoding Product Bin Labeling

In the manufacturing of semiconductor products, there are variations in performance around the average values given in the

technical datasheet. For this reason, Lumileds bins LED components for luminous ﬂux or radiometric power, color point, peak or

dominant wavelength and forward voltage.

LUXEON Z LEDs are labeled using a 4-digit alphanumeric CAT code following the format below:

A B C D

A

–

designates luminous ﬂuxbin (example: B=110 to 120 lumens, C=120 to 130 lumens)

designates color bin (example: 3L, 3U, 5A, 5B, 5C, 5D)

B C

D

designates forward voltage bin (example: P=2.50 to 2.75V, R=2.75 to 3.00V)

Therefore, a LUXEON Z with a lumen range of 110 to 120, color bin of 5A and a forward voltage range of 2.75 to 3.00V has the

following CAT code:

B 5 A R

Luminous Flux Bins

Table 5 lists the standard luminous ﬂux bins for LUXEON Z emitters. Although several bins are outlined, product availability in a

particular bin varies by production run and by product performance. Not all bins are available in all CCTs.

Table 5. Luminous ﬂux bin deﬁnitions for LUXEON Z.

LUMINOUS FLUX ^[1](lm)

BIN

MINIMUM

100

MAXIMUM

110

A

B

C

D

E

F

110

120

130

140

150

160

G

H

J

160

170

180

190

K

190

200

Notes for Table 5:

1. Lumileds maintains a tolerance of ±6.5% on luminous ﬂux measurements.

9

Color Bin Deﬁnition

0.430

NOTE: Color bin space illustration

for 2700K, 3000K and 3500K.

For CCT above 4000K, the ellipse

centers are all above Black Body Line (BBL).

0.425

0.420

0.415

0.410

0.405

0.400

0.395

0.390

Bin 5A

Bin 3U^[1]

Bin 5D

B4

B1

Bin 5B

]

Bin 3L^[2

Bin 5C

^[1]Color bin 3U denotes the area ABOVE

BBL enclosed by 3-step MAE.

^[2]Color bin 3L denotes the area BELOW

BBL enclosed by 3-step MAE.

B1 and B4 are intersection points on BBL

0.445

0.450

0.455

0.460

0.465

0.470

0.475

CIE 1931 x

Color Space Deﬁnition for Above and Below Black Body Line

Parameter Deﬁnition of MacAdam Ellipse

Figure 7: 3- and 5-step MacAdam ellipse illustration for Table 6.

Table 6. 3- and 5-step MacAdam ellipse color bin deﬁnitions for LUXEON Z.

CENTER POINT ^[1]

MAJOR AXIS,

MINOR AXIS,

b

ELLIPSE ROTATION

NOMINAL CCT

COLOR SPACE

(cx, cy)

a

ANGLE, θ

53.70

53.20

54.00

53.70

59.60

53.70

53.20

54.00

53.70

59.60

59.09

58.57

2700K

3000K

3500K

4000K

5000K

2700K

3000K

3500K

4000K

5000K

5700K

Single 3-step MacAdam ellipse

Single 5-step MacAdam ellipse

(0.4578, 0.4101)

(0.4338, 0.4030)

(0.4073, 0.3917)

(0.3818, 0.3797)

(0.3447, 0.3553)

(0.4578, 0.4101)

(0.4338, 0.4030)

(0.4073, 0.3917)

(0.3818, 0.3797)

(0.3447, 0.3553)

(0.3287, 0.3417)

(0.3123, 0.3282)

0.00810

0.00834

0.00927

0.00939

0.00822

0.01350

0.01390

0.01545

0.01565

0.01370

0.01243

0.01115

0.00420

0.00408

0.00414

0.00402

0.00354

0.00700

0.00680

0.00690

0.00670

0.00590

0.00533

0.00475

6500K

Notes for Table 6:

1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space.

Forward Voltage Bins

Table 7. Forward voltage bin deﬁnitions for LUXEON Z.

FORWARD VOLTAGE ^[1](V_f)

BIN

MINIMUM

MAXIMUM

2.75

P

R

S

2.50

2.75

3.00

3.25

Notes for Table 7:

1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.

10

Mechanical Dimensions

Figure 8: Mechanical dimensions for LUXEON Zꢀ

Notes for Figure 8:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

11

Reﬂow Soldering Guidelines

t_p

T_p

Critical Zone

_Lto T_p

Ramp-up

T

T_L

t_L

T_smax

T_smin

Ramp-down

t_s

Preheat Area

25

Time 25ºC to Peak

JEDEC J-STD-020D

Time

Figure 9: Visualization of the acceptable reﬂow temperature proﬁle as speciﬁed in Table 8.

Table 8. Reﬂow proﬁle characteristics for LUXEON Z.

PROFILE FEATURE

Preheat Minimum Temperature (T_smin

Preheat Maximum Temperature (T_smax

LEAD FREE ASSEMBLY

)

150°C

200°C

)

Preheat Time (t_sminto t_smax

)

60 to 180 seconds

3°C / second maximum

217°C

Ramp-Up Rate (T_Lto T_p)

Liquidus Temperature (T_L)

Time Maintained Above Temperature T_L(t_L)

Peak / Classiﬁcation Temperature (T_p)

Time Within 5°C of Actual Temperature (t_p)

Ramp-Down Rate (T_pto T_L)

60 to 150 seconds

260°C

20 to 40 seconds

6°C / second maximum

8 minutes maximum

Time 25°C to Peak Temperature

JEDEC Moisture Sensitivity

Table 9ꢀ Moisture sensitivity levels for LUXEON Zꢀ

FLOOR LIFE

SOAK REQUIREMENTS STANDARD

LEVEL

TIME

CONDITIONS

TIME

CONDITIONS

1

Unlimited

≤30°C / 85% RH

168 Hours +5 / -0

85°C / 85% RH

12

Solder Pad Design

Figure 10: Recommended PCB solder pad layout for LUXEON Zꢀ

Notes for Figure 10:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

13

Packaging Information

Pocket Tape Dimensions

SPROCKET HOLE

Ø1.5±0.1

4±0.1

1.75±0.1

1.90±0.05

5° MAX

+0.3

8

-0.1

0.20±0.02

0.88±0.05

5° MAX

1.50±0.05

Figure 11: Pocket tape dimensions for LUXEON Zꢀ

Notes for Figure 11:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

14

Reel Dimensions

Figure 12: Reel dimensions for LUXEON Zꢀ

Notes for Figure 12:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

15

About Lumileds

Lumileds is the global leader in light engine technology. The company develops, manufactures and distributes groundbreaking

LEDs and automotive lighting products that shatter the status quo and help customers gain and maintain a competitive edge.

With a rich history of industry “ﬁrsts,” Lumileds is uniquely positioned to deliver lighting advancements well into the future by

maintaining an unwavering focus on quality, innovation and reliability.

To learn more about our portfolio of light engines, visit lumileds.com.

Neither Lumileds Holding B.V. nor its aﬃliates shall be liable for any kind of loss of data or

any other damages, direct, indirect or consequential, resulting from the use of the provided

information and data. Although Lumileds Holding B.V. and/or its aﬃliates have attempted to

provide the most accurate information and data, the materials and services information and data

are provided “as is,” and neither Lumileds Holding B.V. nor its aﬃliates warrants or guarantees

the contents and correctness of the provided information and data. Lumileds Holding B.V. and its

aﬃliates reserve the right to make changes without notice. You as user agree to this disclaimer

and user agreement with the download or use of the provided materials, information and data.

LUXEON is a registered trademark of the Lumileds Holding B.V.

in the United States and other countries.

lumileds.com

DS120 LUXEON Z

Product Datasheet 20170327


型号：	LXZ1-5770
厂家：	LUMILEDS LIGHTING COMPANY
描述：	LED LUXEON COOL WHITE 5700K 2SMD
文件：	总17页 (文件大小：2327K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

LXZ1-5770 [LUMILEDS]

相关型号：

LXZ1-6565

LXZ1-PA01

LXZ1-PA01-0250

LXZ1-PA01-0300

LXZ1-PA01-0350

LXZ1-PB01

LXZ1-PB01-0024

LXZ1-PB01-0032

LXZ1-PB01-0040

LXZ1-PB01-0048

LXZ1-PD01

LXZ1-PD01-0032