LL-484WC1F-W2-3K [LUCKY-LIGHT]

4.8mm Round Wide Viewing Angle Type White LED Technical Data Sheet; 4.8毫米回合广视角型白光LED技术数据表
LL-484WC1F-W2-3K
型号: LL-484WC1F-W2-3K
厂家: LUCKY LIGHT ELECTRONIC    LUCKY LIGHT ELECTRONIC
描述:

4.8mm Round Wide Viewing Angle Type White LED Technical Data Sheet
4.8毫米回合广视角型白光LED技术数据表

文件: 总8页 (文件大小:226K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Luckylight  
4.8mm Round Wide Viewing Angle Type  
White LED  
Technical Data Sheet  
Part No.: LL-484WC1F-W2-3K  
Spec No.: A037 X440  
Approved: JoJo  
Rev No.: V.2  
Checked: Wu  
Date: Jun/30/2009  
Drawn: Yao  
Page: 1 OF 8  
Lucky Light Electronics Co., Ltd.  
http://www.luckylight.cn  
Luckylight  
Features:  
Wide viewing angle=100°.  
Reliable and robust.  
Emission color: X=0.28, y=0.29.  
Industrial standard footprint.  
The product itself will remain within RoHS compliant version.  
Descriptions:  
The series is specially designed for applications requiring higher brightness.  
The LED lamps are available with different colors.  
The white LED which was fabricated using a blue LED and a phosphor, and the  
phosphor is excited by blue light and emits yellow fluorescence, the mixture of blue  
light and yellow light results in white emission.  
Utilizing advanced InGaN chip technology.  
Applications:  
TV set.  
Monitor.  
Telephone.  
Computer.  
Circuit board.  
Status indicators.  
Commercial use.  
Advertising Signs.  
Back lighting.  
Spec No.: A037 X440  
Approved: JoJo  
Rev No.: V.2  
Checked: Wu  
Date: Jun/30/2009  
Drawn: Yao  
Page: 2 OF 8  
Lucky Light Electronics Co., Ltd.  
http://www.luckylight.cn  
Luckylight  
Package Dimension:  
Part No.  
Chip Material  
InGaN  
Lens Color  
Source Color  
White  
LL-484WC1F-W2-3K  
Water Clear  
Notes:  
1. All dimensions are in millimeters (inches).  
2. Tolerance is ± 0.25 mm (.010) unless otherwise noted.  
3. Protruded resin under flange is 1.00 mm (.039) max.  
Spec No.: A037 X440  
Approved: JoJo  
Rev No.: V.2  
Checked: Wu  
Date: Jun/30/2009  
Drawn: Yao  
Page: 3 OF 8  
Lucky Light Electronics Co., Ltd.  
http://www.luckylight.cn  
Luckylight  
Absolute Maximum Ratings at Ta=25  
Parameters  
Symbol  
Max.  
100  
100  
25  
Unit  
mW  
mA  
mA  
V
Power Dissipation  
PD  
IFP  
IF  
Peak Forward Current  
(1/10 Duty Cycle, 0.1ms Pulse Width)  
Forward Current  
Reverse Voltage  
VR  
5
Operating Temperature Range  
Storage Temperature Range  
Topr  
Tstg  
Tsld  
-40to +80℃  
-40to +85℃  
Lead Soldering Temperature  
[4mm (.157) From Body]  
260for 5 Seconds  
Notes:  
1. Proper current derating must be observed to maintain junction temperature below the maximum.  
2. LEDs are not designed to be driven in reserve bias.  
Electrical Optical Characteristics at Ta=25℃  
Parameters  
Symbol  
2θ1/2  
VF  
Min. Typ. Max.  
Unit  
Deg  
V
Test Condition  
IF =20mA  
Viewing Angle  
---  
100  
3.3  
--  
Forward Voltage  
Reverse Current  
2.8  
3.8  
IF =20mA  
IR  
x
---  
---  
---  
---  
10  
---  
µA  
---  
VR=5V  
0.28  
0.29  
Chromaticity Coordinates  
Luminous Luminous  
IF =20mA  
IF =20mA  
y
---  
---  
---  
Iv  
1300 2000  
mcd  
Notes:  
1. Luminous Intensity Measurement allowance is ± 10%.  
2. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.  
Spec No.: A037 X440  
Approved: JoJo  
Rev No.: V.2  
Checked: Wu  
Date: Jun/30/2009  
Drawn: Yao  
Page: 4 OF 8  
Lucky Light Electronics Co., Ltd.  
http://www.luckylight.cn  
Luckylight  
CIE 1931 Chromaticity Diagram  
IF=20mA.Ta=25℃  
Bin  
code  
Bin  
code  
x
y
Color(K)  
x
y
Color(K)  
B
C
D
E
F
0.255  
0.268  
0.281  
0.294  
0.307  
0.320  
0.247  
0.270  
0.293  
0.315  
0.339  
0.361  
20000  
16000  
H
I
0.263  
0.275  
0.288  
0.299  
0.311  
0.323  
0.237  
0.259  
0.279  
0.300  
0.321  
0.341  
20000  
16000  
10000  
8000  
J
10000  
8000  
K
L
7000  
6000  
7000  
6000  
G
M
Mcasurcmcnt unccrtainty of the color coordinats : ±0.01.  
Spec No.: A037 X440  
Approved: JoJo  
Rev No.: V.2  
Checked: Wu  
Date: Jun/30/2009  
Drawn: Yao  
Page: 5 OF 8  
Lucky Light Electronics Co., Ltd.  
http://www.luckylight.cn  
Luckylight  
Reliability Test Items And Conditions:  
The reliability of products shall be satisfied with items listed below:  
Confidence level: 90%.  
LTPD: 10%.  
1) Test Items and Results:  
Standard  
Number of  
Damaged  
Test Item  
Test Conditions  
Note  
Test Method  
Tsld=260±5, 10sec 4mm  
from the base of the epoxy  
bulb  
Resistance to Soldering  
Heat  
JEITA ED-4701  
300 302  
1 time  
0/100  
JEITA ED-4701  
300 303  
JEITA ED-4701  
300 307  
JEITA ED-4701  
100 105  
JEITA ED-4701  
200 203  
JEITA ED-4701  
200 201  
JEITA ED-4701  
400 401  
JEITA ED-4701  
400 401  
JEITA ED-4701  
100 103  
Tsld=235±5, 5sec(using  
flux)  
1time  
over 95%  
Solder ability  
Thermal Shock  
0/100  
0/100  
0/100  
0/100  
0/100  
0/100  
0/100  
0/100  
0/100  
0/100  
0~10015sec, 15sec  
100 cycles  
100 cycles  
10 cycles  
1000hrs  
-40~25~100~25℃  
30min,5min,30min,5min  
25~65~-1090%RH  
24hrs/1cycle  
Temperature Cycle  
Moisture Resistance  
Cycle  
High Temperature  
Storage  
Terminal Strength  
(Pull test)  
Terminal Strength  
(bending test)  
Temperature Humidity  
Storage  
Ta=100℃  
Load 10N (1kgf)  
10±1sec  
Load 5N (0.5kgf)  
0°~90°~0° bend 2 times  
No noticeable  
damage  
No noticeable  
damage  
Ta=60, RH=90%  
Ta=-40℃  
1000hrs  
1000hrs  
1000hrs  
Low Temperature  
Storage  
Steady State Operating  
Life  
JEITA ED-4701  
200 202  
Ta=25, IF30mA  
Steady State Operating  
Life of High Humidity  
Heat  
Steady State Operating  
Life of Low  
Ta=60, RH=90%,  
500hrs  
0/100  
0/100  
IF=30mA  
Ta=-30, IF20mA  
1000hrs  
Temperature  
2) Criteria For Judging The Damage:  
Criteria for Judgment  
Item  
Symbol  
Test Conditions  
Min  
---  
Max  
F.V.*)×1.1  
F.V.*)×2.0  
---  
IF20mA  
Forward Voltage  
Reverse Current  
Luminous Intensity  
VF  
IR  
IV  
VR=5V  
---  
IF20mA  
F.V.*)×0.7  
*) F.V.: First Value.  
Spec No.: A037 X440  
Approved: JoJo  
Rev No.: V.2  
Checked: Wu  
Date: Jun/30/2009  
Drawn: Yao  
Page: 6 OF 8  
Lucky Light Electronics Co., Ltd.  
http://www.luckylight.cn  
Luckylight  
Typical Electrical / Optical Characteristics Curves  
(25Ambient Temperature Unless Otherwise Noted)  
Spectrum Distribution  
Forward Current & Forward Voltage  
Ta=25°C  
Ta=25°C  
100  
80  
60  
40  
20  
0
50  
40  
30  
20  
10  
400  
450 500 550 600  
650 700  
0
2.8 3.0 3.2 3.4 3.6 3.8 4.0  
Wavelength λp (nm)  
Forward Voltage VF (V)  
Luminous Intensity &  
Ambient Temperature  
Luminous Intensity & Forward Current  
Ta=25  
1000  
100  
10  
1000  
f=1KHz  
Duty=1/10  
100  
10  
1
1
-60 -40 -20 0 20 40 60 80 100  
100  
101  
102  
103  
Ambient Temperature Ta ()  
Forward Current IF (mA)  
Forward Current Derating Curve  
Radiation Diagram  
0o 10o 20o  
30o  
50  
40  
40o  
50o  
30  
25  
20  
1.0  
0.9  
0.8  
60o  
10  
0
70o  
80o  
90o  
0
20  
40  
60  
80 100  
0.7  
Ambient Temperature Ta ()  
0.5 0.3 0.10 0.2 0.4 0.6  
Spec No.: A037 X440  
Approved: JoJo  
Rev No.: V.2  
Checked: Wu  
Date: Jun/30/2009  
Drawn: Yao  
Page: 7 OF 8  
Lucky Light Electronics Co., Ltd.  
http://www.luckylight.cn  
Luckylight  
Please read the following notes before using the datasheets:  
1. Over-current-proof  
Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change  
(Burn out will happen).  
2. Storage  
2.1 Do not open moisture proof bag before the products are ready to use.  
2.2 Before opening the package, the LEDs should be kept at 30or less and 90%RH or less.  
2.3 The LEDs should be used within a year.  
2.4 After opening the package, the LEDs should be kept at 30or less and 70%RH or less.  
2.5 The LEDs should be used within 168 hours (7 days) after opening the package.  
3. Soldering Condition  
3.1 Pb-free solder temperature profile.  
3.2 Reflow soldering should not be done more than two times.  
3.3 When soldering, do not put stress on the LEDs during heating.  
3.4 After soldering, do not warp the circuit board.  
4. Soldering Iron  
Each terminal is to go to the tip of soldering iron temperature less than 260for 5 seconds within once in  
less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each  
terminal. Be careful because the damage of the product is often started at the time of the hand solder.  
5. Repairing  
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head  
soldering iron should be used (as below figure). It should be confirmed beforehand whether the  
characteristics of the LEDs will or will not be damaged by repairing.  
6. Caution in ESD  
Static Electricity and surge damages the LED. It is recommend to use a wrist band or anti-electrostatic glove  
when handling the LED. All devices equipment and machinery must be properly grounded.  
Spec No.: A037 X440  
Approved: JoJo  
Rev No.: V.2  
Checked: Wu  
Date: Jun/30/2009  
Drawn: Yao  
Page: 8 OF 8  
Lucky Light Electronics Co., Ltd.  
http://www.luckylight.cn  

相关型号:

LL-484WC1F-W5-3K

4.8mm Round Wide Viewing Angle Type White LED Technical Data Sheet
LUCKY-LIGHT

LL-484WC1F-W6-3K

4.8mm Round Wide Viewing Angle Type White LED Technical Data Sheet
LUCKY-LIGHT

LL-484WM1F-W5-1J

4.8mm Round Wide Viewing Angle Type White LED Technical Data Sheet
LUCKY-LIGHT

LL-503AD2E-A1

5mm Round With Flange Type Amber LED Technical Data Sheet
LUCKY-LIGHT

LL-503GD2E-1A

5mm Round With Flange Type Yellow Green LED Technical Data Sheet
LUCKY-LIGHT

LL-503SD2E-1S

5mm Round Standard Type Super Red LED Technical Data Sheet
LUCKY-LIGHT

LL-503UAC1E-1A

5mm Cylindrical With Flange Type Ultra Amber LED Technical Data Sheet
LUCKY-LIGHT

LL-503UAC1E-1A_15

Ultra Amber LED
LUCKY-LIGHT

LL-503UAC1E-2A

5mm Cylindrical With Flange Type Ultra Amber LED Technical Data Sheet
LUCKY-LIGHT

LL-503UAC1E-2A_15

Ultra Amber LED
LUCKY-LIGHT

LL-503UAC1E-3A

5mm Cylindrical With Flange Type Ultra Amber LED Technical Data Sheet
LUCKY-LIGHT

LL-503UAC2E-1AC

5mm Round With Flange Type Ultra Amber LED Technical Data Sheet
LUCKY-LIGHT