V9MLN41206LWH [LITTELFUSE]
RESISTOR, VOLTAGE DEPENDENT;型号: | V9MLN41206LWH |
厂家: | LITTELFUSE |
描述: | RESISTOR, VOLTAGE DEPENDENT 电阻器 |
文件: | 总6页 (文件大小:795K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Varistor Products
Surface Mount Multilayer Varistors (MLVs) > MLN Series
RoHS
MLN SurgeArray™ Suppressor
Description
The MLN SurgeArray™ Suppressor is designed to
help protect components from transient voltages that
exist at the circuit board level. This device provides four
independent suppressors in a single leadless chip in order
to reduce part count and placement time as well as save
space on printed circuit boards.
SurgeArray™ devices are intended to suppress ESD, EFT
and other transients in order to protect integrated circuits
or other sensitive components operating at any voltage
up to 18VDC. SurgeArray™ devices are rated to the IEC
61000-4-2 human body model ESD to help products attain
EMC compliance. The array offers excellent isolation and
low crosstalk between sections.
SizeTable
Metric
EIA
The inherent capacitance of the SurgeArray™ Suppressor
permits it to function as a filter/suppressor, thereby
replacing separate Zener/capacitor combinations.
3216
1206
The MLN array is manufactured using the Littelfuse
Multilayer technology process and is similar to the
Littelfuse ML and MLE Series of discrete leadless chips.
Applications
Features
•
•
•
•
Data, Diagnostic
I/O Ports
Communications/
Cellular Phones
•
•
RoHS Compliant
•
•
Low leakage
Four individual
devices in one chip
Operating voltage
up to 18VM(DC)
Analog Signal/
Sensor Lines
•
•
Computer/DSP
Products
•
•
ESD rated to IEC
61000-4-2 (Level 4)
•
•
-55ºC to 125ºC
operating temp range
Portable/Hand-
Held Products
Industrial Instruments
Including Medical
AC characterized
for impedance and
capacitance
Low-profile, PCMCIA
compatible
Mobile
•
Low adjacent channel
crosstalk, -55dB
at 10MHz (Typ)
Absolute Maximum Ratings
• For ratings of individual members of a series, see device ratings and specifications table.
Continuous
MLN Series
Units
Steady State Applied Voltage:
DC Voltage Range (VM(DC)
)
5.5 - 18
V
Operating AmbientTemperature Range (TA)
-55 to +125
-55 to +150
ºC
ºC
StorageTemperature Range (TSTG
)
© 2013 Littelfuse, Inc.
Specifications are subject to change without notice.
63
Revised: October 9, 2013
MLN SurgeArray™ Suppressor
Please refer to www.littelfuse.com/series/MLN.html for current information.
Varistor Products
Surface Mount Multilayer Varistors (MLVs) > MLN Series
Device Ratings and Specifications Any Single Section
Maximum Ratings (125ºC)
Specifications (25ºC)
Typical ESD Nominal Voltage
Maximum
Non-
Maximum
Maximum
Clamping
Voltage (at
Maximum
Continuous
Working
Non-
Capacitance
at 1 MHz
(1V p-p)
repetitive
repetitive
Supression Voltage at 1mA DCTest
Surge Current Surge Energy Noted 8/20μs)
(Note1)
Current
Voltage
Part Number
(8/20μs)
(10/1000μs)
Current
(Note 2) (Note 3)
8kV Contact 15kV Air
Peak Clamp Peak
(Note 4)
C
VN(DC) VN(DC)
VM(DC)
ITM
WTM
VC
Min
Max
TYP
(pF)
430
MAX
(pF)
520
(V)
(A)
(J)
(V)
(V)
(V)
(V)
(V)
(V)
V5.5MLN41206
V9MLN41206
V14MLN41206
V18MLN41206
V18MLN41206L
5.5
30
0.10
15.5 at 2A
60
35
45
7.10
10.8
9.0
30
30
30
30
0.10
0.10
0.10
0.05
23.0 at 2A
30.0 at 2A
40.0 at 2A
50.0 at 1A
95
50
55
63
95
75
85
11.0
15.9
22.0
25.0
16.0
20.3
28.0
35.0
250
140
100
45
300
175
125
75
14.0
18.0
18.0
110
165
200
100
130
NOTES: 1. Tested to IEC61000-4-2 Human Body Model (HBM) discharge test circuit.
2. Direct discharge to device terminals (IEC preffered test method).
3. Corona discharge through air (represents actual ESD event)
4. Capacitance may be customized, contact Sales.
Peak Current and Energy Derating Curve
Peak Pulse CurrentTestWaveform for ClampingVoltage
For applications exceeding 125ºC ambient temperature, the
peak surge current and energy ratings must be reduced.
100
90
100
90
80
70
60
50
40
30
20
10
0
50
10
O
t
t
1
TIME
1
Figure 2
t
2
01 = Virtual Origin of Wave
Example:
-55
50 60
70
80
90 100 110 120 130 140 150
o
T =Time from 10% to 90% of Peak
T1 = RiseTime = 1.25 xT
T2 = DecayTime
For an 8/20 μs Current Waveform:
8μs =T1 = RiseTime
20μs =T2 = VirtualTime
to Half Value
AMBIENTTEMPERATURE ( C)
Figure 1
(Impulse Duration)
Typical Performance Curves
Equivalent Series Resistance
Impedance vs Frequency, 1206 Size
10000
1000
100
10
1000
100
V5.5
V9
10
1
V14
1
V18
V18L
0.1
1MHz
10MHz
100MHz
1GHz
10GHz
Frequency
0.1
Figure 3
0.1
1
10
Frequency (MHz)
100
1000
Figure 4
64
Revised: October 9, 2013
© 2013 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/MLN.html for current information.
MLN SurgeArray™ Suppressor
Varistor Products
Surface Mount Multilayer Varistors (MLVs) > MLN Series
Typical Performance Curves (continued)
NominalVoltage Stability to IEC 1000-4-2 (8kV Contact
Method, One Section)
1206 Size Pulse Rating for Long Duration Surges
(Any Single Section)
100
25
V18
NUMBER OF SURGES
20
1
100
V14
103
10
15
10
V9
10
V5.5
1
5
0
∞
104
105
106
0
10
100
1000
10000
0.1
10
100
1000
10000
NUMBER OF DISCHARGES
Figure 5
Square Wave Impulse Duration (µs)
Figure 6
V-I Characteristic, 1206 size
Capacitance vs Frequency, 1206 Size
500
100
V18L
V5.5
MAXIMUM CLAMP VOLTAGE
V18
MAXIMUM STANDBY
V14
V9
400
V5.5
V18L
300
V18
V14
V9
10
V9
200
V5.5
V14
V18
100
V18L
1
10μA
100μA
1mA
10mA
100mA
1A
10A
100A
0
0.1
1
10
100
1000
Current (A)
Frequency (MHz)
Figure 8
Figure 7
Adjacent Channel Crosstalk
0
-20
-40
-60
V18L
V18
V14
V9
-80
V5.5
VIN
=
1VRMS
Z
=
50Ω
-100
-120
0.001
0.01
0.1
1
10
100
1000
Frequency (MHz)
Figure 9
© 2013 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/MLN.html for current information.
65
Revised: October 9, 2013
MLN SurgeArray™ Suppressor
Varistor Products
Surface Mount Multilayer Varistors (MLVs) > MLN Series
Lead (Pb) Soldering Recommendations
The principal techniques used for the soldering of
components in surface mount technology are IR Re-flow
and Wave soldering. Typical profiles are shown on the right.
Reflow Solder Profile
250
200
150
100
The recommended solder for the MLN suppressor is
a 62/36/2 (Sn/Pb/Ag), 60/40 (Sn/Pb) or 63/37 (Sn/Pb).
Littelfuse also recommends an RMA solder flux.
MAXIMUM TEMPERATURE
230°C
40-80
SECONDS
ABOVE 183°C
Wave soldering is the most strenuous of the processes.
To avoid the possibility of generating stresses due to
thermal shock, a preheat stage in the soldering process
is recommended, and the peak temperature of the solder
process should be rigidly controlled.
RAMP RATE
<2°C/s
PREHEAT DWELL
PREHEAT ZONE
50
0
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
When using a reflow process, care should be taken to
ensure that the MLN chip is not subjected to a thermal
gradient steeper than 4 degrees per second; the ideal
gradient being 2 degrees per second. During the soldering
process, preheating to within 100 degrees of the solder's
peak temperature is essential to minimize thermal shock.
TIME (MINUTES)
Figure 10
Wave Solder Profile
300
250
200
150
100
50
Once the soldering process has been completed, it is
still necessary to ensure that any further thermal shocks
are avoided. One possible cause of thermal shock is hot
printed circuit boards being removed from the solder
process and subjected to cleaning solvents at room
temperature. The boards must be allowed to cool gradually
to less than 50ºC before cleaning.
MAXIMUMWAVE 260°C
SECOND PREHEAT
FIRST PREHEAT
0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
Figure 11
TIME (MINUTES)
66
Revised: October 9, 2013
© 2013 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/MLN.html for current information.
MLN SurgeArray™ Suppressor
Varistor Products
Surface Mount Multilayer Varistors (MLVs) > MLN Series
Product Dimensions (mm)
PAD LAYOUT DEMENSIONS
CHIP LAYOUT DIMENSIONS
T
W
E
D
X
A
P
L
B
C
BW
S
BL
1206 Size
Dimension
IN
0.035
MM
0.890
A
B
0.065
1.650
C
0.100
2.540
D
0.018
0.460
E
0.030
0.790
L
0.126 -/+0.008
0.063 -/+0.008
0.053 Max
0.016 -/+0.004
0.007 +0.01/- 0.002
0.030 Ref
3.200 -/+0.200
1.600 -/+0.200
1.350 Max
0.410 -/+0.100
0.180 +0.25/-0.050
0.760 Ref
W
T
BW
BL
P
X
0.045 -/+0.004
0.015 -/+0.004
1.140 -/+0.100
0.380 -/+0.100
S
Part Numbering System
V 18 ML N 4 1206 L W T
DEVICE FAMILY
TVSS Device
PACKING OPTIONS*
A: Bulk Pack, 2500 pieces
H: 7in (178mm) Diameter Reel, 2500 pieces
T: 13in (330mm) Diameter Reel, 10,000 pieces
MAXIMUM DC
WORKING VOLTAGE
END TERMINATION
W: Ag/P /P (Silver/Platinum/Palladium)
d
t
MULTILAYER DESIGNATOR
SERIES DESIGNATOR
N: Array
CAPACITANCE OPTION
(no letter): Standard
L: Low Capacitance Version
NUMBER OF SECTIONS
DEVICE SIZE: 1206: 120mil x 60mil
Packaging*
Quantity
Device Size
13” Inch Reel
("T" Option)
7” Inch Reel
("H" Option)
Bulk Pack
("A" Option)
1206
10,000
2,500
2,500
*(Packaging) It is recommended that parts be kept in the sealed bag provided and that parts be used as soon as possible when removed from bags.
© 2013 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/MLN.html for current information.
67
MLN SurgeArray™ Suppressor
Revised: October 9, 2013
Varistor Products
Surface Mount Multilayer Varistors (MLVs) > MLN Series
Tape and Reel Specifications
t
D
P
0
PRODUCT
IDENTIFYING
LABEL
1
0
P
2
PLASTIC CARRIER TAPE
E
F
W
K
0
B
0
EMBOSSMENT
TOP TAPE
P
A
0
1
178mm
OR 330mm
DIA. REEL
8mm
NOMINAL
t
D
1
2
Symbol
A0
B0
Description
Dimensions in Millimeters
Width of Cavity
Length of Cavity
Depth of Cavity
Width ofTape
Dependent on Chip Size to Minimize Rotation.
Dependent on Chip Size to Minimize Rotation.
Dependent on Chip Size to Minimize Rotation.
K0
8 -/+0.2
3.5 -/+0.5
1.75 -/+0.1
4 -/+0.1
W
Distance Between Drive Hole Centers and Cavity Centers
Distance Between Drive Hole Centers andTape Edge
Distance Between Cavity Center
F
E
P1
Axial Distance Between Drive Hole Centers and Cavity Centers
Axial Distance Between Drive Hole Centers
Drive Hole Diameter
2 -/+0.1
P2
4 -/+0.1
P0
1.55 -/+0.05
1.05 -/+0.05
0.3 Max
D0
D1
T1
Diameter of Cavity Piercing
EmbossedTapeThickness
TopTapeThickness
0.1 Max
T2
Notes :
• Conforms to EIA-481-1, Revision A
• Can be supplied to IEC publication 286-3
68
Revised: October 9, 2013
© 2013 Littelfuse, Inc.
Specifications are subject to change without notice.
MLN SurgeArray™ Suppressor
Please refer to www.littelfuse.com/series/MLN.html for current information.
相关型号:
©2020 ICPDF网 联系我们和版权申明