SX02TSRP [LITTELFUSE]
New 1.5 Amp sensitive gate SCR series offers high static dv/dt with low; 新的1.5安培敏感栅可控硅系列提供了高静态dv / dt的低
| 型号： | SX02TSRP |
| 厂家： | 
LITTELFUSE |
| 描述： | New 1.5 Amp sensitive gate SCR series offers high static dv/dt with low |
| 文件： | 总8页 (文件大小：351K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
tꢀ5ISVꢀIPMFꢀBOEꢀTVSGBDFꢀ
time (tq) < 35 ꢀsec.
tꢀ
4FOTJUJWFꢀHBUFꢀGPSꢀEJSFDUꢀ
tꢀ
4VSHFꢀ
capability > 15Amps
microprocessor interface
tꢀ
#MPDLJOHꢀWPMUBHFꢀ
Teccor® brandThyristors
EV Series 1.5 Amp Sensitive SCRs
HF
Sx02xS Series
Description
New 1.5 Amp sensitive gate SCR series offers high static
dv/dt with low turn off time (tq) through small die planar
construction design. All SCR’s junctions are glass-
passivated to ensure long term reliability and parametric
stability.
Features
tꢀ
3P)4ꢀDPNQMJBOUꢀBOEꢀ
Halogen-Free
tꢀ
tꢀ
)JHIꢀEWꢁEUꢀOPJTFꢀJNNVOJUZ
*NQSPWFEꢀUVSOꢂPGGꢀ
mount packages
Main Features
Symbol
Value
1.5
Unit
A
(VDRM / VRRM
)
IT(RMS)
VDRM / VRRM
IGT
capability — up to 600V
400 to 600
200
V
μA
Schematic Symbol
A
Applications
The Sx02xS EV series is specifically designed for Gas
Ignition applications that require high pulse surge current
capability.
G
K
Absolute Maximum Ratings
Symbol
IT(RMS)
Parameter
Value
Unit
TO-92
SOT-223
TO-92
TC = 65°C
TL = 95°C
TC = 65°C
TC = 95°C
RMS on-state current
(full sine wave)
1.5
A
IT(AV)
Average on-state current
0.95
A
A
SOT-223
F = 50 Hz
F = 60 Hz
F = 50 Hz
F = 60 Hz
12.5
15.0
0.78
0.93
Non repetitive surge peak on-state current
(Single cycle, TJ initial = 25°C)
TO-92
SOT-223
ITSM
tp = 10 ms
tp = 8.3 ms
I2t
I2t Value for fusing
A2s
TO-92
SOT-223
di/dt
Critical rate of rise of on-state current IG = 10mA
50
A/ꢀs
TJ = 125°C
IGM
Peak gate current
tp = 10 ꢀs
1.0
A
TJ = 125°C
TJ = 125°C
PG(AV)
Tstg
TJ
Average gate power dissipation
Storage junction temperature range
Operating junction temperature range
0.1
W
°C
°C
-40 to 150
-40 to 125
Sx02xS Series
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
201
Revised:December22,201009:54AM
Please refer to http://www.littelfuse.com for current information.
Teccor® brandThyristors
EV Series 1.5 Amp Sensitive SCRs
Electrical Characteristics (TJ = 25°C, unless otherwise specified)
Sx02xS
Symbol
IGT
Description
Test Conditions
Unit
Min
Max
DC GateTrigger Current
DC GateTrigger Voltage
Peak Reverse Gate Voltage
Holding Current
15
200
μA
V
VD = 12V
RL = 60 Ω
VGT
VGRM
IH
—
5
0.8
—
5
IRG = 10ꢀA
RGK = 1 kΩ
V
—
mA
TJ = 125°C
VD = VDRM / VRRM
Exponential Waveform
RGK = 1 kΩ
Critical Rate-of-Rise of
Off-State Voltage
(dv/dt)s
25
—
V/ꢀs
TJ = 125°C @ 600 V
Turn-OffTime
Turn-OnTime
—
—
35
3
ꢀs
ꢀs
tq
RGK = 1 kΩ
IG = 10mA
PW = 15ꢀsec
IT = 3.0A (pk)
tgt
Static Characteristics (TJ = 25°C, unless otherwise specified)
Value
Symbol
VTM
Description
Test Conditions
Unit
Min
Max
Peak On-State Voltage
ITM = 3.0A (pk)
—
1.70
V
TJ = 25°C @ VD= VDRM
RGK = 1 kΩ
—
—
5
ꢀA
IDRM
Off-State Current, Peak Repetitive
TJ = 125°C @ VD= VDRM
RGK = 1 kΩ
500
ꢀA
Thermal Resistances
Symbol
Description
Test Conditions
Value
50
Unit
TO-92
1
Junction to case (AC)
Junction to ambient
IT = 1.5A (RMS)
IT = 1.5A (RMS)
°C/W
°C/W
Rth(j-c)
SOT-223
TO-92
25
160
60
1
Rth(j-a)
SOT-223
1 60Hz AC resistive load condition, 100% conduction.
Sx02xS Series
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
202
Revised:December22,201009:54AM
Please refer to http://www.littelfuse.com for current information.
Teccor® brandThyristors
EV Series 1.5 Amp Sensitive SCRs
Figure 1: Normalized DC GateTrigger Current
vs. JunctionTemperature
Figure 2: Normalized DC Holding Current
vs. JunctionTemperature
2.5
2.0
1.5
1.0
0.5
0.0
2.0
1.5
1.0
0.5
0.0
-40
-25
-10
+5
+20
+35
+50
+65 +80
+95 +110
+125
-40
-25
-10
+5
+20
+35
+50 +65 +80
+95 +110 +125
JunctionTemperature (TJ) °C
JunctionTemperature (TJ) °C
Figure 3: Normalized DC GateTriggerVoltage
vs. JunctionTemperature
Figure 4: Power Dissipation (Typical)
vs. RMS On-State Current
1.5
1.5
1.0
0.5
CURRENTWAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180o
1.0
0.5
0.0
-40
-25
-10
+5
+20 +35 +50 +65 +80 +95 +110 +125
0.0
0.5
1.0
1.5
JunctionTemperature (TJ) °C
RMS On-state Current [IT(RMS)] (Amps)
Figure 5: Maximum Allowable CaseTemperature
vs. On-State Current
130
120
SOT-223
110
100
TO-92
90
80
CURRENTWAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
70
60
50
CONDUCTION ANGLE: 180o
CASETEMPERATURE: Measured as
shown on dimensional drawings
0.0
0.5
1.0
1.5
RMS On-state Current [IT (RMS)] (Amps)
Sx02xS Series
©2011 Littelfuse, Inc
203
Revised:December22,201009:54AM
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brandThyristors
EV Series 1.5 Amp Sensitive SCRs
Figure 6: Surge Peak On-State Current vs. Number of Cycles
20
15
Supply Frequency: 60Hz Sinusoidal
Load: Resistive
RMS On-State Current [IT(RMS)]: Max Rated Value at
Specific CaseTemperature
12
10
9
8
7
Notes:
1. Gate control may be lost during and immediately
following surge current interval.
2. Overload may not be repeated until junction
temperature has returned to steady-state rated value.
6
5
4
3
2
1
1
2
3
4
5
6 7 8 9 10
20
30 40 60 80 100
200 300 400 600
1000
Surge Current Duration – Full Cycle
Soldering Parameters
Reflow Condition
Pb – Free assembly
150°C
tP
TP
TL
TS(max)
TS(min)
25
-Temperature Min (Ts(min)
)
Ramp-up
Pre Heat -Temperature Max (Ts(max)
-Time (min to max) (ts)
)
200°C
tL
60 – 180 secs
Ramp-down
Preheat
Average ramp up rate (LiquidusTemp)
(TL) to peak
5°C/second max
tS
TS(max) toTL - Ramp-up Rate
5°C/second max
217°C
-Temperature (TL) (Liquidus)
Reflow
time to peak temperature
-Time (min to max) (ts)
60 – 150 seconds
260+0/-5 °C
Time
PeakTemperature (TP)
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max
8 minutes Max.
280°C
Time 25°C to peakTemperature (TP)
Do not exceed
Sx02xS Series
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
204
Revised:December22,201009:54AM
Please refer to http://www.littelfuse.com for current information.
Teccor® brandThyristors
EV Series 1.5 Amp Sensitive SCRs
Physical Specifications
Environmental Specifications
Test
AC Blocking
Specifications and Conditions
Terminal Finish
Body Material
Lead Material
100% MatteTin-plated.
MIL-STD-750, M-1040, Cond A Applied
Peak AC voltage @ 125°C for 1008 hours
UL recognized epoxy meeting flammability
classification 94V-0.
MIL-STD-750, M-1051,
100 cycles; -40°C to +150°C; 15-min
dwell-time
Temperature Cycling
Copper Alloy
EIA / JEDEC, JESD22-A101
1008 hours; 320V - DC: 85°C; 85%
rel humidity
Temperature/
Humidity
MIL-STD-750, M-1031,
1008 hours; 150°C
Design Considerations
HighTemp Storage
Low-Temp Storage
Careful selection of the correct device for the application’s
operating parameters and environment will go a long way
toward extending the operating life of theThyristor. Good
design practice should limit the maximum continuous
current through the main terminals to 75% of the device
rating. Other ways to ensure long life for a power discrete
semiconductor are proper heat sinking and selection of
voltage ratings for worst case conditions. Overheating,
overvoltage (including dv/dt), and surge currents are
the main killers of semiconductors. Correct mounting,
soldering, and forming of the leads also help protect
against component damage.
1008 hours; -40°C
MIL-STD-750, M-1056
10 cycles; 0°C to 100°C; 5-min dwell-
time at each temperature; 10 sec (max)
transfer time between temperature
Thermal Shock
Autoclave
EIA / JEDEC, JESD22-A102
168 hours (121°C at 2 ATMs) and
100% R/H
Resistance to
Solder Heat
MIL-STD-750 Method 2031
Solderability
Lead Bend
ANSI/J-STD-002, category 3, Test A
MIL-STD-750, M-2036 Cond E
Dimensions —TO-92 (E Package)
Inches
Millimeters
A
TC MEASURING POINT
Dimensions
Min
Max
0.205
0.210
Min
Max
5.200
5.330
B
A
#
C
D
E
F
0.175
0.170
0.500
0.135
0.125
0.080
0.016
0.045
0.095
0.015
4.450
4.320
12.70
3.430
3.180
2.040
0.407
1.150
2.420
0.380
SEATING
PLANE
C
GATE
0.165
0.105
0.021
0.055
0.105
0.020
4.190
2.660
0.533
1.390
2.660
0.500
G
H
I
ANODE
G
H
CATHODE
I
D
J
E
F
J
F
Sx02xS Series
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
205
Revised:December22,201009:54AM
Please refer to http://www.littelfuse.com for current information.
Teccor® brandThyristors
EV Series 1.5 Amp Sensitive SCRs
Dimensions – SOT-223
Anode
Gate
Cathode
Inches
Typ
Millimeters
Typ
Anode
Dimensions
Min
Max
Min
6.30
3.30
—
Max
6.70
3.70
1.80
0.10
3.15
0.85
—
A
#
C
D
E
0.248 0.256 0.264
6.50
3.50
—
Pad Layout for SOT-223
0.130
—
0.138
—
0.146
0.071
0.004
0.124
3.3
(0.130”)
1.5
(0.059”)
0.001
0.114
—
0.02
2.90
0.60
—
—
0.118
3.00
0.70
2.30
4.60
7.00
1.2
6.4
(0.252”)
2.3
(0.047”)
(0.091”)
F
G
H
I
0.024 0.027 0.034
(3x)
1.5
(0.059”)
—
—
0.090
0.181
—
—
4.6
(0.181”)
—
—
0.264 0.276 0.287
0.009 0.010 0.014
6.70
0.24
7.30
0.35
Dimensions in Millimeters (Inches)
J
0.26
K
10° MAX
Product Selector
Voltage
Part Number
Gate Sensitivity
Package
400V
X
600V
—
S402ES
S602ES
S402TS
S602TS
200μA
200μA
200μA
200μA
TO-92
TO-92
—
X
X
—
SOT-223
SOT-223
—
X
Packing Options
Part Number
Sx02ES
Marking
Sx02ES
Sx02ES
Sx02ES
Sx02TS
Weight
0.170 g
0.170 g
0.170 g
0.120 g
Packing Mode
Base Quantity
2500
#VML
Sx02ESAP
Sx02ESRP
Ammo Pack
Tape & Reel
Tape & Reel
2000
2000
Sx02TSRP
1000
Note: x = voltage
Sx02xS Series
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
206
Revised:December22,201009:54AM
Teccor® brandThyristors
EV Series 1.5 Amp Sensitive SCRs
TO-92 (3-lead) Reel Pack (RP) Radial Leaded Specifications
Meets all EIA-468-C Standards
0.02 (0.5)
0.236
(6.0)
0.098 (2.5) MAX
1.26
(32.0)
1.6
(41.0)
0.708
(18.0)
0.354
(9.0)
0.5
(12.7)
Anode
Cathode
0.2 (5.08)
0.1 (2.54)
14.17(360.0)
Gate
0.157
(4.0)
DIA
Flat up
1.97
(50.0)
Dimensions
are in inches
(and millimeters).
Direction of Feed
TO-92 (3-lead) Ammo Pack (AP) Radial Leaded Specifications
Meets all EIA-468-C Standards
0.02 (0.5)
0.236
(6.0)
0.098 (2.5) MAX
1.27
(32.2)
1.62
(41.2)
0.708
(18.0)
0.354
(9.0)
0.157
(4.0)
Anode
0.2 (5.08)
0.5
(12.7)
0.1 (2.54)
Cathode
Gate
DIA
Flat down
25 Devices per fold
1.85
(47.0)
12.2
(310.0)
Dimensions
are in inches
(and millimeters).
1.85
(47.0)
13.3
(338.0)
Sx02xS Series
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
207
Revised:December22,201009:54AM
Teccor® brandThyristors
EV Series 1.5 Amp Sensitive SCRs
SOT-223 Reel Pack (RP) Specifications
4 mm
8 mm
2 mm
1.5 mm
A
1.75 mm
5.5 mm
12 mm
GATE
K
A
180 mm
13 mm Abor
Hole Diameter
13.4 mm
Part Numbering System
Part Marking System
Sx02xxx xx
SCR SERIES
PACKING TYPE
Blank: Bulk
A
RP: Reel Pack (TO-92)
YMXXX
: Embossed Carrier Pack
(SOT-223)
AP: Ammo Pack (TO-92)
VOLTAGE
4: 400V
6: 600V
YMXXX
K
SENSITIVITY
S: 200μA Sensitive SCR
CURRENT
02: 1.5A
A
G
K
PACKAGE TYPE
E: TO-92
G
A
T: SOT-223
Sx02xS Series
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
208
Revised:December22,201009:54AM
Please refer to http://www.littelfuse.com for current information.
相关型号：
SX035M0022B2F-0511
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 22uF, Through Hole Mount, CAN, RADIAL LEADED
YAGEO
SX035M0022Y2I
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 22uF, Through Hole Mount, RADIAL LEADED
YAGEO
SX035M0068B3S-0811
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 68uF, Through Hole Mount, CAN, RADIAL LEADED
YAGEO
SX035M0068Y1I
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 68uF, Through Hole Mount, RADIAL LEADED
YAGEO
SX035M0220C5S11012
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 220uF, Through Hole Mount
YAGEO
SX035M0220C5S11015
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 220uF, Through Hole Mount
YAGEO
SX035M0330B5F-1019
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 330uF, Through Hole Mount, CAN, RADIAL LEADED
YAGEO
SX035M0330B5S-1019
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 330uF, Through Hole Mount, CAN, RADIAL LEADED
YAGEO
SX035M0470A5F-1030
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 470uF, Through Hole Mount, CAN, RADIAL LEADED
YAGEO
SX035M0470A5F-1325
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 470uF, Through Hole Mount, CAN, RADIAL LEADED
YAGEO
SX035M0470A5S-1030
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 470uF, Through Hole Mount, CAN, RADIAL LEADED
YAGEO
SX035M0470A5S-1325
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 470uF, Through Hole Mount, CAN, RADIAL LEADED
YAGEO
©2020 ICPDF网 联系我们和版权申明