SMCJ160A-HR [LITTELFUSE]
TVS DIODE 160V 259V DO214AB;
| 型号： | SMCJ160A-HR |
| 厂家： | 
LITTELFUSE |
| 描述： | TVS DIODE 160V 259V DO214AB 局域网 光电二极管 电视 |
| 文件： | 总6页 (文件大小：743K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TVS Diodes
Surface Mount – 1500W > SMCJ-HR Series
Pb e3
SMCJ-HR Series
RoHS
Description
The SMCJ-HR High Reliability series is designed
specifically to protect sensitive electronic equipment from
voltage transients induced by lightning and other transient
voltage events.
Uni-directional
Bi-directional
Agency Approvals
Features
• For surface mounted
applications in order to
optimize board space
• Low profile package
• Built-in strain relief
• Typical IR less than 1µA
above 12V
• HighTemperature
soldering guaranteed:
260°C/40 seconds at
terminals
• Plastic package has
Underwriters laboratory
flammability 94V-O
• Meet MSL level1, per
J-STD-020, LF maximun
peak of 260°C
• Matte tin lead–free plated
• Halogen free and RoHS
compliant
• 2nd level interconnect is
Pb-free per IPC/JEDEC
J-STD-609A.01
• Recognized to UL 497B as
an Isolated Loop Circuit
Protector
Agency
Agency File Number
E230531
Maximum Ratings andThermal Characteristics
(TA=25OC unless otherwise noted)
• VBR @TJ= VBR@25°C x (1+αT x
(TJ - 25))
(αT:Temperature Coefficient)
Parameter
Symbol
PPPM
Value
1500
6.5
Unit
W
• Glass passivated chip
junction
• 1500W peak pulse power
capability at 10/1000μs
waveform, repetition rate
(duty cycles):0.01%
• Fast response time:
typically less than 1.0ps
from 0V to BV min
• Excellent clamping
capability
Peak Pulse Power Dissipation atTA=25ºC by
10/1000µs waveform (Fig.1)(Note 1), (Note 2)
Power Dissipation on infinite heat sink at
PM(AV)
IFSM
W
TA=50OC
Peak Forward Surge Current, 8.3ms Single Half
Sine Wave (Note 3)
Maximum Instantaneous Forward Voltage at
100A for Unidirectional
only (Note 4)
Operating Junction and StorageTemperature
Range
200
A
VF
3.5/5.0
V
TJ, TSTG -65 to 150 °C
TypicalThermal Resistance Junction to Lead
RuJL
RuJA
15
75
°C/W
°C/W
TypicalThermal Resistance Junction to
Ambient
• Low incremental surge
resistance
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Mounted on copper pad area of 0.31x0.31” (8.0 x 8.0mm) to each terminal.
3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional device only, duty
cycle=4 per minute maximum.
Functional Diagram
Applications
TVS devices are ideal for the protection of I/O Interfaces,
CC bus and other vulnerable circuits used inTelecom,
V
Computer, Industrial and Consumer electronic applications.
Bi-directional
Cathode
Anode
Uni-directional
© 2020 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 03/10/20
TVS Diodes
Surface Mount – 1500W > SMCJ-HR Series
Electrical Characteristics
Maximum Maximum Maximum
Test
Current
IT
Breakdown
VoltageVBR
(Volts) @ IT
Reverse
Stand off
VoltageVR
(Volts)
Agency
Approval
Part
Number
(Uni)
Part
Number
(Bi)
Clamping
VoltageVC
@ Ipp
Peak
Pulse
Current Ipp
(A)
Reverse
Leakage IR
@VR
Marking
(mA)
(V)
(µA)
UNI
BI
MIN
MAX
SMCJ5.0A-HR
SMCJ6.0A-HR
SMCJ6.5A-HR
SMCJ7.0A-HR
SMCJ7.5A-HR
SMCJ8.0A-HR
SMCJ8.5A-HR
SMCJ9.0A-HR
SMCJ10A-HR
SMCJ11A-HR
SMCJ12A-HR
SMCJ13A-HR
SMCJ14A-HR
SMCJ15A-HR
SMCJ16A-HR
SMCJ17A-HR
SMCJ18A-HR
SMCJ20A-HR
SMCJ22A-HR
SMCJ24A-HR
SMCJ26A-HR
SMCJ28A-HR
SMCJ30A-HR
SMCJ33A-HR
SMCJ36A-HR
SMCJ40A-HR
SMCJ43A-HR
SMCJ45A-HR
SMCJ48A-HR
SMCJ51A-HR
SMCJ54A-HR
SMCJ58A-HR
SMCJ60A-HR
SMCJ64A-HR
SMCJ70A-HR
SMCJ75A-HR
SMCJ78A-HR
SMCJ85A-HR
SMCJ90A-HR
SMCJ100A-HR
SMCJ110A-HR
SMCJ120A-HR
SMCJ130A-HR
SMCJ150A-HR
SMCJ154A-HR
SMCJ160A-HR
SMCJ170A-HR
SMCJ5.0CA-HR
SMCJ6.0CA-HR
SMCJ6.5CA-HR
SMCJ7.0CA-HR
SMCJ7.5CA-HR
SMCJ8.0CA-HR
SMCJ8.5CA-HR
SMCJ9.0CA-HR
SMCJ10CA-HR
SMCJ11CA-HR
SMCJ12CA-HR
SMCJ13CA-HR
SMCJ14CA-HR
SMCJ15CA-HR
SMCJ16CA-HR
SMCJ17CA-HR
SMCJ18CA-HR
SMCJ20CA-HR
SMCJ22CA-HR
SMCJ24CA-HR
SMCJ26CA-HR
SMCJ28CA-HR
SMCJ30CA-HR
SMCJ33CA-HR
SMCJ36CA-HR
SMCJ40CA-HR
SMCJ43CA-HR
SMCJ45CA-HR
SMCJ48CA-HR
SMCJ51CA-HR
SMCJ54CA-HR
SMCJ58CA-HR
SMCJ60CA-HR
SMCJ64CA-HR
SMCJ70CA-HR
SMCJ75CA-HR
SMCJ78CA-HR
SMCJ85CA-HR
SMCJ90CA-HR
SMCJ100CA-HR
SMCJ110CA-HR
SMCJ120CA-HR
SMCJ130CA-HR
SMCJ150CA-HR
SMCJ154CA-HR
SMCJ160CA-HR
SMCJ170CA-HR
GDE
GDG
GDK
GDM
GDP
GDR
GDT
GDV
GDX
GDZ
GEE
GEG
GEK
GEM
GEP
GER
GET
GEV
GEX
GEZ
GFE
GFG
GFK
GFM
GFP
GFR
GFT
BDE
BDG
BDK
BDM
BDP
BDR
BDT
BDV
BDX
BDZ
BEE
BEG
BEK
BEM
BEP
BER
BET
BEV
BEX
BEZ
BFE
BFG
BFK
BFM
BFP
BFR
BFT
5.0
6.0
6.5
7. 0
7. 5
8.0
8.5
9.0
10.0
11.0
12.0
13.0
14.0
15.0
16.0
17. 0
18.0
20.0
22.0
24.0
26.0
28.0
30.0
33.0
36.0
40.0
43.0
45.0
48.0
51.0
54.0
58.0
60.0
64.0
70.0
75.0
78.0
85.0
90.0
100.0
110.0
120.0
130.0
150.0
154
6.40
6.67
7.22
7.78
8.33
8.89
9.44
10.00
11.10
12.20
13.30
14.40
15.60
16.70
17.80
18.90
20.00
22.20
24.40
26.70
28.90
31.10
33.30
36.70
40.00
44.40
47.80
50.00
53.30
56.70
60.00
64.40
66.70
71.10
77.80
83.30
86.70
94.40
100.00
111.00
122.00
133.00
144.00
167.00
172
7. 0 0
7.37
7.98
8.60
9.21
9.83
10.40
11.10
12.30
13.50
14.70
15.90
17.20
18.50
19.70
20.90
22.10
24.50
26.90
29.50
31.90
34.40
36.80
40.60
44.20
49.10
52.80
55.30
58.90
62.70
66.30
71.20
73.70
78.60
86.00
92.10
95.80
104.00
111.00
123.00
135.00
147.00
159.00
185.00
190
10
10
10
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
9.2
10.3
11.2
12.0
12.9
13.6
14.4
15.4
17. 0
18.2
19.9
21.5
23.2
24.4
26.0
27.6
29.2
32.4
35.5
38.9
42.1
45.4
48.4
53.3
58.1
64.5
69.4
72.7
77.4
163.0
145.7
134.0
125.0
116.3
110.3
104.2
97.4
88.3
82.5
75.4
69.8
64.7
61.5
57.7
54.4
51.4
46.3
42.3
38.6
35.7
33.1
31.0
28.2
25.9
23.3
21.7
20.6
19.4
18.2
17. 3
16.1
15.5
14.6
13.3
12.4
11.9
11.0
10.3
9.3
8.5
7. 8
7. 2
6.2
800
800
500
200
100
50
20
10
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
-
GFV
GFX
GFZ
BFV
BFX
BFZ
82.4
87.1
GGE
GGG
GGK
GGM
GGP
GGR
GGT
GGV
GGX
GGZ
GHE
GHG
GHK
GHM
GHN
GHP
GHR
BGE
BGG
BGK
BGM
BGP
BGR
BGT
BGV
BGX
BGZ
BHE
BHG
BHK
BHM
BHN
BHP
BHR
93.6
96.8
103.0
113.0
121.0
126.0
137.0
146.0
162.0
177.0
193.0
209.0
243.0
249
1
1
1
1
1
1
1
1
6.1
5.8
5.5
160.0
170.0
178.00
189.00
197.00
209.00
259.0
275.0
1
1
X
X
Note:
1. Each lot of parts will pass group B test requirement.
© 2020 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 03/10/20
TVS Diodes
Surface Mount – 1500W > SMCJ-HR Series
Screen Process
100% vision inspection
MIL-STD-750 method 2074
100%HighTemperature Storage Life (168hrs,150C)
100% X-RAY inspection
MIL-STD-750 method 1031
MIL-STD-750 method 2076
MIL-STD-750 method 1051
JEDEC J-STD-020
100%Temperature cycle test (-55-150C, 20 cycles, dwell time 15 min)
100% Reflow (2X)
100% surge test (2x)
MIL-STD-750 method 4066
MIL–STD–750 method 1038
MIL-STD-750 method 4016.4021.4011
100% HTRB(150C, Bias=VR(80% breakdown voltage), 96hrs),for Bi-direction products, 96hrs for each direction
Final electrical test( 100% 3 sigma limit, 100% dynamic test and PAT limit)
Note: Up-screen program can be specified by customer’s request via contacting Littlefuse service
Group BTest Requirement
Screen
Method
Condition
Requirement
10/1000 µs Peak Pluse
Waveform
Maximum Clamping Voltage (VC) @ Peak
Sample size 45 perform 10x
Surge test
Plus Current (IPP
)
Accept 0 failures
Sample size 45
340 hours (680 hours for bi-direction products, each direction 340
hours) Accept 0 failures
MIL -STD-750, Method
1038.5
Applied Voltage
100% VR@150°C
Burn - In (HTRB)
Electrical test
Sample size 45
Accept 0 failures
--
IR@VR, V(BR)@IT
I-V Curve Characteristics
Bi-directional
Uni-directional
Ipp
IT
IR
Vc VBR
VR
Vc VBR
VR
V
V
IR
IT
I
I
R
V
F
VRVBR
Vc
T
I
pp
Ipp
PPPM Peak Pulse Power Dissipation -- Max power dissipation
VR Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation
VBR Breakdown Voltage -- Maximum voltagethat flows though the TVS at a specified test current (IT)
VC Clamping Voltage -- Peak voltage measured across the suppressor at a specified Ippm (peak impulse current)
IR
Reverse Leakage Current -- Current measured at VR
VF Forward Voltage Drop for Uni-directional
© 2020 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 03/10/20
TVS Diodes
Surface Mount – 1500W > SMCJ-HR Series
Ratings and Characteristic Curves (TA=25°C unless otherwise noted)
Figure 1 -TVSTransients ClampingWaveform
Figure 2 - Peak Pulse Power Rating
Voltage Transients
100
Voltage Across TVS
10
Current Through TVS
0.31x0.31" (8.0x8.0mm)
Copper Pad Area
1
0.000001
0.00001
0.0001
0.001
td-Pulse Width (sec.)
Time
Figure 3 - Pulse Derating Curve
Figure 4 - PulseWaveform
100
80
60
40
20
0
150
t =10µsec
r
T
=25°C
J
Pulse Width(td) is defined
as the point where the peak
current decays to 50% of I
PPM
Peak Value
I
100
PPM
Half Value
I
PPM
I
PPM
( )
2
50
0
10/1000µsec. Waveform
as defined by R.E.A
t
d
0
25
50
75
100
125
150 175
1.0
2.0
t-Time (ms)
3.0
4.0
0
TA-Ambient temperature (ºC)
Figure 6 - Steady State Power Dissipation Derating
Curve
Figure 5 -Typical Junction Capacitance
100000
6.5
6
5.5
Bi-directional V=0V
10000
Uni-directional V=0V
5
4.5
4
3.5
3
2.5
2
1.5
1000
100
10
Uni-directional @VR
Bi-directional @VR
Tj=25C
f=1.0MHz
Vsig=50mVp-p
1
1
1.0
0.5
0
10.0
100.0
1000.0
0
25
50
75
100
125
150
175
VBR - Reverse Breakdown Voltage (V)
TA - Ambient Temperature (ºC)
© 2020 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 03/10/20
TVS Diodes
Surface Mount – 1500W > SMCJ-HR Series
Figure 7 - Maximum Non-Repetitive Peak Forward
Surge Current Uni-Directional Only
200
180
160
140
120
100
80
60
40
20
0
1
10
100
Number of Cycles at 60 Hz
Soldering Parameters
Reflow Condition
Lead–free assembly
150°C
-Temperature Min (Ts(min)
-Temperature Max (Ts(max)
-Time (min to max) (ts)
)
tp
TP
Pre Heat
)
200°C
Ramp-up
Critical Zone
to T
T
L
P
60 – 180 secs
TL
tL
Average ramp up rate (LiquidusTemp (TL) to peak 3°C/second max
Ts(max)
T
S(max) toTL - Ramp-up Rate
3°C/second max
217°C
Ramp-down
Ts(min)
-Temperature (TL) (Liquidus)
-Time (min to max) (ts)
Reflow
ts
Preheat
60 – 150 seconds
260+0/-5 °C
PeakTemperature (TP)
25˚C
Time within 5°C of actual peakTemperature (tp)
Ramp-down Rate
20 – 40 seconds
6°C/second max
8 minutes Max.
280°C
t 25˚C to Peak
Time (t)
Time 25°C to peakTemperature (TP)
Do not exceed
Physical Specifications
Environmental Specifications
Weight
Case
0.007 ounce, 0.21 grams
HighTemp. Storage
HTRB
JESD22-A103
JESD22-A108
JESD22-A106
JEDEC DO214AB. Molded plastic body over glass passivated
junction
Color band denotes positive end (cathode) except
Bidirectional.
Thermal Shock
MSL
Polarity
JEDEC-J-STD-020, Level 1
JESD22-A101
H3TRB
Terminal
MatteTin-plated leads, Solderable per JESD22-B102
RSH
JESD22-B106
© 2020 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 03/10/20
TVS Diodes
Surface Mount – 1500W > SMCJ-HR Series
Dimensions
Inches
Millimeters
Min
DO-214AB (SMC J-Bend)
Dimensions
Cathode Band
(for Uni-directional products only)
Min
0.114
0.260
0.220
0.079
0.030
0.002
0.305
0.006
0.129
0.094
-
Max
0.126
0.280
0.245
0.103
0.060
0.008
0.320
0.012
-
Max
3.200
7. 110
6.220
2.620
1.520
0.203
8.130
0.305
-
A
B
C
D
E
F
2.900
6.600
5.590
2.060
0.760
0.051
7.750
0.152
3.300
2.400
-
C
A
D
B
G
H
I
H
J
K
L
J
-
-
F
I
K
L
0.165
-
4.200
-
E
G
0.094
2.400
Part Numbering System
Part Marking System
SMCJ XXX C A -HR
Cathode Band
High Reliability
Littelfuse Logo
5% Voltage Tolerance
Bi-Directional
Marking Code
XXXX
Voltage
YMXXX
Trace Code Marking
Y:Year Code
Series
M: Month Code
XXX: Lot Code
Packaging
Component
Package
Packaging
Option
Part number
SMCJxxxXX-HR
Quantity
Packaging Specification
DO-214AB
500
Tape & Reel – 16mm tape/7” reel
EIA STD RS-481
Tape and Reel Specification
0.157
(4.0)
0.63
(16.0)
Cathode
0.315
(8.0)
0.059
(1.5)
Cover tape
DIA
7.0 (187)
Dimensions are in inches
(and millimeters).
0.80 (20.2)
Arbor Hole Dia.
Direction of Feed
0.65
(16.4)
Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are
not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at: www.littelfuse.com/disclaimer-electronics.
© 2020 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 03/10/20
相关型号：
SMCJ160A-M3/9AT
DIODE 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-214AB, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC, SMC, 2 PIN, Transient Suppressor
VISHAY
SMCJ160A/7
Trans Voltage Suppressor Diode, 1500W, Unidirectional, 1 Element, Silicon, DO-214AB, PLASTIC, SMC, 2 PIN
VISHAY
SMCJ160AE3/TR
Trans Voltage Suppressor Diode, 1500W, 160V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AB, ROHS COMPLIANT, PLASTIC, SMCJ, 2 PIN
MICROSEMI
SMCJ160AE3TR
1500W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-214AB, ROHS COMPLIANT, PLASTIC, SMCJ, 2 PIN
MICROSEMI
SMCJ160AP
DIODE 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-214AB, ROHS COMPLIANT, PLASTIC, SMC, 2 PIN, Transient Suppressor
MCC
©2020 ICPDF网 联系我们和版权申明