SMBJ7.0CA-HR [LITTELFUSE]
TVS DIODE 7V 12V DO214AA;
| 型号： | SMBJ7.0CA-HR |
| 厂家： | 
LITTELFUSE |
| 描述： | TVS DIODE 7V 12V DO214AA 电视 |
| 文件： | 总6页 (文件大小：874K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TVS Diode
Surface Mount – 600W > SMBJ-HR series
Pb e3
RoHS
SMBJ-HR Series
Description
The SMBJ-HR High Reliability series is designed
specifically to protect sensitive electronic equipment from
voltage transients induced by lightning and other transient
voltage events.
Uni-directional
Bi-directional
Features
• 600W peak pulse power
capability at 10/1000μs
waveform, repetition rate
(duty cycles):0.01%
• Excellent clamping
capability
• Low incremental surge
resistance
• Typical IR less than 1µA
above 12V
• VBR @TJ= VBR@25°C
x (1+αT x (TJ - 25))
(αT:Temperature
Coefficient, typical value
is 0.1%)
• Glass passivated chip
junction
• High temperature
soldering guaranteed:
260°C/40 seconds at
terminals
• Plastic package is
flammability rated V-0 per
UL 94
• Meet MSL level1, per
J-STD-020, LF maximun
peak of 260°C.
• Matte tin lead–free plated
• Halogen free and RoHS
compliant
• Pb-free E3 means 2nd
level interconnect is
Pb-free and the terminal
finish material is tin(Sn)
(IPC/JEDEC J-STD-
609A.01)
Agency Approvals
Agency
Agency File Number
E230531
Maximum Ratings andThermal Characteristics
(TA=25OC unless otherwise noted)
• For surface mounted
applications to optimize
board space
Parameter
Symbol
Value
Unit
• Low profile package
Peak Pulse Power Dissipation at
TA=25ºC by 10/1000µs Waveform (Fig.2)(Note
1), (Note 2)
•Typical failure mode is
short from over-specified
voltage or current
• Whisker test is conducted
based on JEDEC
JESD201A per its table 4a
and 4c
• IEC 61000-4-2 ESD
PPPM
600
W
Power Dissipation on Infinite Heat Sink at
TA=50OC
PM(AV)
IFSM
VF
5.0
100
3.5V
W
A
Peak Forward Surge Current, 8.3ms Single Half
Sine Wave (Note 3)
Maximum Instantaneous Forward Voltage at
50A for Unidirectional Only
V
Operating Junction and StorageTemperature
Range
TJ, TSTG -65 to 150 °C
15kV(Air), 8kV (Contact)
• ESD protection of data
lines in accordance with
IEC 61000-4-2
TypicalThermal Resistance Junction to Lead
RƟJL
20
°C/W
°C/W
TypicalThermal Resistance Junction to Ambient RƟJA
100
Notes:
• UL Recognized to ANSI/
UL 497B: Protectors for
Data Communications and
Fire-Alarm Circuits.
1. Non-repetitive current pulse per Fig. 4 and derated above TA = 25OC per Fig. 3.
2. Mounted on copper pad area of 0.2x0.2” (5.0 x 5.0mm) to each terminal.
• EFT protection of data
lines in accordance with
IEC 61000-4-4
3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional device only, duty
cycle=4 per minute maximum.
• Built-in strain relief
• Fast response time:
typically less than 1.0ps
from 0V to BV min
Functional Diagram
Applications
TVS Components are ideal for the protection of I/O
Interfaces, VCC bus and other vulnerable circuits used in
Telecom, Computer, Industrial and Consumer electronic
applications.
Bi-directional
Cathode
Anode
Uni-directional
© 2020 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 04/06/20
TVS Diode
Surface Mount – 600W > SMBJ-HR series
Electrical Characteristics (TA=25°C unless otherwise noted)
Breakdown
VoltageVBR
(Volts) @ IT
Maximum
Clamping
VoltageVC
@ Ipp
Maximum
Reverse
Leakage IR
@VR
Test
Current
IT
Reverse
Stand off
VoltageVR
(Volts)
Maximum
Peak
Pulse Current
Ipp (A)
Agency
Approval
Part
Number
(Uni)
Part
Number
(Bi)
Marking
(mA)
(V)
(µA)
UNI
BI
MIN
MAX
SMBJ5.0A-HR
SMBJ6.0A-HR
SMBJ6.5A-HR
SMBJ7.0A-HR
SMBJ7.5A-HR
SMBJ8.0A-HR
SMBJ8.5A-HR
SMBJ9.0A-HR
SMBJ10A-HR
SMBJ11A-HR
SMBJ12A-HR
SMBJ13A-HR
SMBJ14A-HR
SMBJ15A-HR
SMBJ16A-HR
SMBJ17A-HR
SMBJ18A-HR
SMBJ20A-HR
SMBJ22A-HR
SMBJ24A-HR
SMBJ26A-HR
SMBJ28A-HR
SMBJ30A-HR
SMBJ33A-HR
SMBJ36A-HR
SMBJ40A-HR
SMBJ43A-HR
SMBJ45A-HR
SMBJ48A-HR
SMBJ51A-HR
SMBJ54A-HR
SMBJ58A-HR
SMBJ60A-HR
SMBJ64A-HR
SMBJ70A-HR
SMBJ75A-HR
SMBJ78A-HR
SMBJ85A-HR
-
SMBJ5.0CA-HR
SMBJ6.0CA-HR
SMBJ6.5CA-HR
SMBJ7.0CA-HR
SMBJ7.5CA-HR
SMBJ8.0CA-HR
SMBJ8.5CA-HR
SMBJ9.0CA-HR
SMBJ10CA-HR
SMBJ11CA-HR
SMBJ12CA-HR
SMBJ13CA-HR
SMBJ14CA-HR
SMBJ15CA-HR
SMBJ16CA-HR
SMBJ17CA-HR
SMBJ18CA-HR
SMBJ20CA-HR
SMBJ22CA-HR
SMBJ24CA-HR
SMBJ26CA-HR
SMBJ28CA-HR
SMBJ30CA-HR
SMBJ33CA-HR
SMBJ36CA-HR
SMBJ40CA-HR
SMBJ43CA-HR
SMBJ45CA-HR
SMBJ48CA-HR
SMBJ51CA-HR
SMBJ54CA-HR
SMBJ58CA-HR
SMBJ60CA-HR
SMBJ64CA-HR
SMBJ70CA-HR
SMBJ75CA-HR
SMBJ78CA-HR
SMBJ85CA-HR
SMBJ90CA-HR
SMBJ100CA-HR
SMBJ110CA-HR
SMBJ120CA-HR
SMBJ130CA-HR
SMBJ150CA-HR
SMBJ160CA-HR
SMBJ170CA-HR
KE
KG
KK
KM
KP
KR
KT
KV
KX
KZ
LE
LG
LK
LM
LP
LR
LT
AE
AG
AK
AM
AP
AR
AT
5.0
6.0
6.5
7. 0
7. 5
8.0
8.5
9.0
10.0
11.0
12.0
13.0
14.0
15.0
16.0
17. 0
18.0
20.0
22.0
24.0
26.0
28.0
30.0
33.0
36.0
40.0
43.0
45.0
48.0
51.0
54.0
58.0
60.0
64.0
70.0
75.0
78.0
85.0
90.0
100.0
110.0
120.0
130.0
150.0
160.0
170.0
6.40
6.67
7.22
7.78
8.33
8.89
9.44
10.00
11.10
12.20
13.30
14.40
15.60
16.70
17.80
18.90
20.00
22.20
24.40
26.70
28.90
31.10
33.30
36.70
40.00
44.40
47.80
50.00
53.30
56.70
60.00
64.40
66.70
71.10
77.80
83.30
86.70
94.40
100.00
111.00
122.00
133.00
144.00
167.00
178.00
189.00
7. 0 0
7.37
7.98
8.60
9.21
9.83
10.40
11.10
12.30
13.50
14.70
15.90
17.20
10
10
10
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
9.2
10.3
11.2
12.0
12.9
13.6
14.4
15.4
17. 0
18.2
19.9
21.5
23.2
24.4
26.0
27.6
29.2
32.4
35.5
38.9
42.1
45.4
48.4
53.3
58.1
64.5
69.4
72.7
77.4
65.3
58.3
53.6
50.0
46.6
44.2
41.7
39.0
35.3
33.0
30.2
28.0
25.9
24.6
23.1
21.8
20.6
18.6
16.9
15.5
14.3
13.3
12.4
11.3
10.4
9.3
8.7
8.3
7. 8
7. 3
6.9
6.5
6.2
5.9
5.3
5.0
4.8
4.4
4.1
3.7
3.4
3.1
800
800
500
200
100
50
20
10
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
AV
AX
AZ
BE
BG
BK
BM
BP
BR
BT
BV
BX
BZ
CE
CG
CK
CM
CP
CR
CT
CV
CX
CZ
DE
DG
DK
DM
DP
DR
DT
DV
DX
DZ
EE
EG
EK
EM
EP
ER
18.50
19.70
20.90
22.10
24.50
26.90
29.50
31.90
34.40
36.80
40.60
44.20
49.10
52.80
55.30
58.90
62.70
66.30
71.20
73.70
78.60
86.00
92.10
95.80
104.00
111.00
123.00
135.00
147.00
159.00
185.00
197.00
209.00
LV
LX
LZ
ME
MG
MK
MM
MP
MR
MT
MV
MX
MZ
NE
NG
NK
NM
NP
NR
NT
NV
-
82.4
87.1
93.6
96.8
103.0
113.0
121.0
126.0
137.0
146.0
162.0
177.0
193.0
209.0
243.0
259.0
275.0
1
1
1
1
1
1
1
1
-
-
-
-
-
-
-
-
-
-
-
-
-
-
2.9
2.5
2.3
2.2
1
Note:
1. Each lot of parts will pass group B test requirement.
© 2020 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 04/06/20
TVS Diode
Surface Mount – 600W > SMBJ-HR series
Screen Process
100%Vision Inspection
MIL-STD-750 method 2074
100% HighTemperature Storage Life (168hrs,175°C)
100% X-RAY inspection
MIL-STD-750 method 1031
MIL-STD-750 method 2076
MIL-STD-750 method 1051
JEDEC J-STD-020
100%Temperature CycleTest (-55 to150°C, 20 cycles, dwell time 15 min)
100% Reflow (2x)
100% SurgeTest (2x)
MIL-STD-750 method 4066
100% HTRB 150°C Bias=VR(80% breakdown voltage, 96hrs, and each direction 96hrs for Bi-directional products) MIL–STD–750 method 1038
Final ElectricalTest( 100% 3 sigma limit, 100% dynamic test and PAT limit)
MIL-STD-750 method 4016.4021.4011
Note: Up-screen program can be specified by customer’s request via contacting Littelfuse service
Group BTest Requirement
Screen
Method
Condition
Requirement
Maximum clamping Voltage (VC) @ Peak
Sample Size 45 perform 10x
Surge test
10/1000 µs Peak Pulse Waveform
Pulse Current (IPP
)
Accept 0 failures
Sample size 45
Applied voltage
100% VR@150°C
Burn - In (HTRB)
Electrical test
MIL -STD-750, Method 1038.5
340 hours (680 hours for bi-direction products, each direction
340 hours) Accept 0 failures
Sample size 45
Accept 0 failures
IR@VR, V(BR)@IT
--
I-V Curve Characteristics
Bi-directional
Uni-directional
Ipp
IT
IR
Vc VBR
VR
Vc VBR
VR
V
V
IR
IT
IR
IT
VRVBR Vc
VF
Ipp
Ipp
PPPM Peak Pulse Power Dissipation -- Max power dissipation
VR Stand-off Voltage -- Maximum voltage that can be applied to theTVS without operation
VBR Breakdown Voltage -- Maximum voltage that flows though theTVS at a specified test current (IT)
VC Clamping Voltage -- Peak voltage measured across the suppressor at a specified Ippm (peak impulse current)
IR Reverse Leakage Current -- Current measured at VR
VF Forward Voltage Drop for Uni-directional
© 2020 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 04/06/20
TVS Diode
Surface Mount – 600W > SMBJ-HR series
Ratings and Characteristic Curves (TA=25°C unless otherwise noted)
Figure 1 -TVSTransients ClampingWaveform
Figure 2 - Peak Pulse Power Rating
Voltage Transients
100
Voltage Across TVS
10
1
Current Through TVS
0.2x0.2" (5.0x5.0mm)
Copper Pad Area
0.1
0.001
0.01
0.1
1
Time
td-Pulse Width (ms.)
Figure 3 - Pulse Derating Curve
Figure 4 - PulseWaveform
100
80
60
40
20
0
150
t =10µsec
r
T
=25°C
J
Pulse Width(td) is defined
as the point where the peak
current decays to 50% of I
PPM
Peak Value
I
100
PPM
Half Value
I
PPM
I
PPM
( )
2
50
0
10/1000µsec. Waveform
as defined by R.E.A
t
d
0
25
50
75
100 125 150
175
1.0
2.0
t-Time (ms)
3.0
4.0
0
TJ - Initial Junction Temperature (ºC)
Figure 5 -Typical Junction Capacitance
Figure 6 - Steady State Power Dissipation Derating Curve
100000
6
5
4
3
2
1
0
Uni-di
onal V=0V
Bi-direc nal V=0V
10000
1000
100
10
Uni-di
Bi-direc nal
V=VR
onal
1
1
10
100
1000
0
25
50
75
100
125
150
175
VBR - Reverse Breakdown Voltage (V)
TA - Ambient Temperature (ºC)
© 2020 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 04/06/20
TVS Diode
Surface Mount – 600W > SMBJ-HR series
Figure 7 - Maximum Non-Repetitive Peak Forward
Surge Current Uni-Directional Only
120
100
80
60
40
20
0
1
10
100
Number of Cycles at 60 Hz
Soldering Parameters
Reflow Condition
Lead–free assembly
150°C
-Temperature Min (Ts(min)
-Temperature Max (Ts(max)
-Time (min to max) (ts)
)
tp
TP
Pre Heat
)
200°C
Ramp-up
Critical Zone
to T
T
60 – 180 secs
L
P
TL
tL
Average ramp up rate (LiquidusTemp (TL) to peak 3°C/second max
Ts(max)
T
S(max) toTL - Ramp-up Rate
3°C/second max
217°C
Ramp-down
-Temperature (TL) (Liquidus)
-Time (min to max) (ts)
Ts(min)
Reflow
ts
60 – 150 seconds
260+0/-5 °C
Preheat
PeakTemperature (TP)
25˚C
Time within 5°C of actual peakTemperature (tp)
Ramp-down Rate
20 – 40 seconds
6°C/second max
8 minutes Max.
260°C
t 25˚C to Peak
Time (t)
Time 25°C to peakTemperature (TP)
Do not exceed
Physical Specifications
Environmental Specifications
Weight
Case
0.003 ounce, 0.093 grams
HighTemp. Storage
JESD22-A103
JESD22-A108
JESD22-A104
JEDEC DO214AA. Molded plastic body over glass
passivated junction
HTRB
Temperature Cycling
Polarity
Color band denotes cathode except Bidirectional
MatteTin-plated leads, Solderable per JESD22-B102
MSL
JEDEC-J-STD-020, Level 1
JESD22-A101
Terminal
H3TRB
RSH
JESD22-A111
© 2020 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 04/06/20
TVS Diode
Surface Mount – 600W > SMBJ-HR series
Dimensions
Inches
Millimeters
Min
Dimensions
DO-214AA (SMB J-Bend)
Min
0.077
0.160
0.130
0.084
0.030
-
Max
0.086
0.180
0.155
0.096
0.060
0.008
0.220
0.012
-
Max
2.200
4.570
3.940
2.440
1.520
0.203
5.590
0.305
-
Cathode Band
(for Uni-directional products only)
A
B
C
D
E
F
1.950
4.060
3.300
2.130
0.760
-
C
A
D
B
G
H
I
0.205
0.006
0.089
0.085
-
5.210
0.152
2.260
2.160
-
J
K
L
H
J
-
-
I
K
L
0.107
-
2.740
-
F
0.085
2.160
E
G
Solder Pads
(all dimensions in mm)
Part Numbering System
Part Marking System
SMBJ XXX C A -HR
Cathode Band
(for uni-directional products only)
Littelfuse Logo
High Reliability
5% Voltage Tolerance
Bi-Directional
Marking Code
XX
YMXXX
Trace Code Marking
Y:Year Code
Voltage
M: Month Code
XXX: Lot Code
Series
Packaging
Part number
Component Package
Quantity
Packaging Option
Packaging Specification
SMBJxxxXX-HR
DO-214AA
3000
Tape & Reel - 12mm tape/13” reel
EIA STD RS-481
Tape and Reel Specification
0.157
(4.0)
0.47
(12.0)
Cathode
0.315
(8.0)
0.059
(1.5)
Cover tape
DIA
13.0 (330)
Dimensions are in inches
(and millimeters).
0.80 (20.2)
Arbor Hole Dia.
Direction of Feed
0.49
(12.5)
Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are
not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at: www.littelfuse.com/disclaimer-electronics.
© 2020 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 04/06/20
相关型号：
SMBJ7.0CA-TP
Trans Voltage Suppressor Diode, 600W, 7V V(RWM), Bidirectional, 1 Element, Silicon, DO-214AA, ROHS COMPLIANT, PLASTIC, SMB, 2 PIN
MCC
SMBJ7.0CA-TP-HF
Trans Voltage Suppressor Diode, 600W, 7V V(RWM), Bidirectional, 1 Element, Silicon, DO-214AA, SMB, 2 PIN
MCC
SMBJ7.0CA/5
Trans Voltage Suppressor Diode, 600W, Bidirectional, 1 Element, Silicon, DO-214AA, PLASTIC, SMB, 2 PIN
VISHAY
SMBJ7.0CAE3/TR
Trans Voltage Suppressor Diode, 600W, 7V V(RWM), Bidirectional, 1 Element, Silicon, DO-214AA, ROHS COMPLIANT, PLASTIC PACKAGE-2
MICROSEMI
SMBJ7.0CAE3/TR13
Trans Voltage Suppressor Diode, 600W, 7V V(RWM), Bidirectional, 1 Element, Silicon, DO-214AA, ROHS COMPLIANT, PLASTIC, SMBJ, 2 PIN
MICROSEMI
SMBJ7.0CAE3/TR7
Trans Voltage Suppressor Diode, 600W, 7V V(RWM), Bidirectional, 1 Element, Silicon, DO-214AA, ROHS COMPLIANT, PLASTIC, SMBJ, 2 PIN
MICROSEMI
SMBJ7.0CAE3TR
600W, BIDIRECTIONAL, SILICON, TVS DIODE, DO-214AA, ROHS COMPLIANT, PLASTIC PACKAGE-2
MICROSEMI
©2020 ICPDF网 联系我们和版权申明