Q2004V3TP [LITTELFUSE]
TRIAC SENS GATE 200V 4A TO251;
| 型号： | Q2004V3TP |
| 厂家： | 
LITTELFUSE |
| 描述： | TRIAC SENS GATE 200V 4A TO251 三端双向交流开关 |
| 文件： | 总10页 (文件大小：637K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Thyristors
4 Amp Sensitive & Standard Triacs
RoHS
Lxx04xx & Qxx04xx Series
Description
The Lxx04xx and Qxx04xx are 4 Amp bidirectional solid
state switch series. They are designed for AC switching
and phase control applications such as motor speed and
temperature modulation controls, lighting controls, and
static switching relays.
Sensitive type devices guarantee gate control in Quadrants
I & IV as needed for digital control circuitry.
Standard type devices normally operate in Quadrants I & III
triggered from AC line.
Features & Benefits
Agency Approval
• RoHS-compliant
• No contacts to wear out
from reaction of switching
events
Agency
Agency File Number
E71639
• Glass – passivated
junctions
• Restricted (or limited) RFI
generation, depending on
activation point of
Notes:
- L Package only.
- 400V and 600V for Sensitive Triac (L Device Type)
- 400V, 600V, 800V, or 1000V for Standard Triac (Q Device Type)
• Voltage capability up to
1000 V
• Surge capability up to
55 A
sine wave
• Requires only a short gate
activation pulse in each
half-cycle
Main Features
• The L-package has
an isolation rating of
2500VRMS
Symbol
Value
Unit
A
IT(RMS)
4
• Solid-state switching
eliminates arcing or
contact bounce that
create voltage transients
VDRM/VRRM
400, 600, 800 or 1000
3 to 25
V
IGT (Q1)
mA
Schematic Symbol
Applications
Typical applications are AC solid-state switches, power
tools, home/brown goods and white goods appliances.
MT2
MT1
Sensitive gateTriacs can be directly driven by
microprocessor or popular opto-couplers/isolators.
Internally constructed isolated packages are offered for
ease of heat sinking with highest isolation voltage.
G
Absolute Maximum Ratings — SensitiveTriacs (4 Quadrants)
Symbol
Parameter
Value
Unit
Lxx04Ly
TC = 90°C
TC = 95°C
t = 20 ms
t = 16.7 ms
RMS on-state current
(full sine wave)
IT(RMS)
4
A
Lxx04Ry/Lxx04Vy/Lxx04Dy
f = 50 Hz
33
40
Non repetitive surge peak on-state current
(full cycle, TJ initial = 25°C)
ITSM
I2t
A
f = 60 Hz
I2t Value for fusing
tp = 8.3 ms
6.6
A2s
A/μs
Critical rate of rise of on-state current
(IG = 50mA with ≤ 0.1μs rise time)
di/dt
f = 120 Hz
tp=20μs
TJ = 110°C
50
IGTM
PG(AV)
Tstg
Peak gate trigger current
Average gate power dissipation
Storage temperature range
TJ = 110°C
TJ = 110°C
4
A
0.3
W
°C
°C
-40 to 150
-40 to 110
TJ
Operating junction temperature range
Note: xx = voltage/10, y = sensitivity
© 2020 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: BO.11/17/20
Thyristors
4 Amp Sensitive & Standard Triacs
Absolute Maximum Ratings — StandardTriacs
Symbol
Parameter
Value
Unit
Qxx04Ly
TC = 105°C
TC = 110°C
RMS on-state current
(full sine wave)
IT(RMS)
4
A
Qxx04Ry/Qxx04Vy/Qxx04Dy
f = 50 Hz
f = 60 Hz
t = 20 ms
46
55
Non repetitive surge peak on-state current
(full cycle, TJ initial = 25°C)
ITSM
I2t
A
t = 16.7 ms
I2t Value for fusing
tp = 8.3 ms
12.5
A2s
A/μs
Critical rate of rise of on-state current
(IG = 50mA with ≤ 0.1μs rise time)
di/dt
f = 120 Hz
TJ = 125°C
50
IGTM
Peak gate trigger current
tp=20μs
TJ = 125°C
TJ = 125°C
4
A
PG(AV)
Average gate power dissipation
0.3
W
°C
°C
Tstg
Storage temperature range
Operating junction temperature range
-40 to 150
-40 to 125
TJ
Note: xx = voltage/10, y = sensitivity
Electrical Characteristics (TJ = 25°C, unless otherwise specified) — SensitiveTriac (4 Quadrants)
Symbol
Test Conditions
Quadrant
I – II – III
Lxx04x3
Lxx04x5
Lxx04x6
Lxx04x8
Unit
3
3
5
5
5
10
20
IGT
VD = 12V RL = 60 Ω
VD = 12V RL = 60 Ω
MAX.
MAX.
mA
V
IV
10
VGT
ALL
1.3
VGD
IH
VD = VDRM RL = 3.3 kΩ TJ = 110°C
IT = 100mA
ALL
MIN.
0.2
V
MAX.
5
10
25
15
1
10
30
20
1
15
35
25
1
mA
400V
600V
25
15
dv/dt
VD = VDRM Gate Open TJ = 100°C
TYP.
V/μs
(dv/dt)c
tgt
(di/dt)c = 2.16 A/ms TJ = 110°C
TYP.
TYP.
0.5
2.8
V/μs
μs
IG = 2 x IGT PW = 15μs IT = 5.6 A(pk)
3.0
3.0
3.2
Electrical Characteristics (TJ = 25°C, unless otherwise specified) — StandardTriac
Symbol
Test Conditions
Quadrant
I – II – III
Qxx04x3
Qxx04x4
Unit
MAX.
TYP.
10
25
1.3
0.2
20
40
30
25
50
1.3
0.2
30
75
50
40
50
2
IGT
VD = 12V RL = 60 Ω
mA
IV
VGT
VGD
IH
VD = 12V RL = 60 Ω
VD = VDRM RL = 3.3 kΩ TJ = 125°C
IT = 200mA
I – II – III
ALL
MAX.
MIN.
MAX.
V
V
mA
400V
600V
800V
1000V
VD = VDRM Gate Open TJ = 125°C
dv/dt
MIN.
V/μs
V
D = VDRM Gate Open TJ = 100°C
(di/dt)c = 2.16 A/ms TJ = 125°C
(dv/dt)c
tgt
TYP.
TYP.
2
V/μs
μs
IG = 2 x IGT PW = 15μs IT = 5.6 A(pk)
VD = 2/3 VDRM Gate Open TJ = 125°C
2.5
40
3.0
dv/dt
800V
V/μs
Note: xx = voltage/10, x = package
© 2020 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: BO.11/17/20
Thyristors
4 Amp Sensitive & Standard Triacs
Static Characteristics (TJ = 25°C, unless otherwise specified)
Symbol
Test Conditions
Value
Unit
VTM
ITM = 5.6A tp = 380 µs
MAX.
1.60
5
V
TJ = 25°C
TJ = 110°C
TJ = 25°C
TJ = 125°C
TJ = 100°C
400-600V
400-600V
400-1000V
400-800V
1000V
μA
μA
μA
Lxx04xy
200
10
2
IDRM
IRRM
VDRM = VRRM
MAX.
Qxx04xy
mA
3
Thermal Resistances
Symbol
Parameter
Value
Unit
L/Qxx04Dy
L/Qxx04Ly
L/Qxx04Ry
L/Qxx04Vy
L/Qxx04Ly
L/Qxx04Ry
L/Qxx04Vy
1.5
3.5
2.2
1.5
50
RƟ(J-C)
Junction to case (AC)
°C/W
RƟ(J-A)
Junction to ambient
45
°C/W
70
Note: xx = voltage/10, x = package, y = sensitivity
Figure 2: Normalized DC GateTrigger Current for
All Quadrants vs. JunctionTemperature
Figure 1: Definition of Quadrants
ALL POLARITIES ARE REFERENCED TO MT1
4.0
3.0
2.0
1.0
0.0
MT2 POSITIVE
(Positive Half Cycle)
+
MT2
MT2
(-)
I
(+)
I
GATE
GT
GT
GATE
MT1
MT1
REF
MT2
REF
MT2
QII QI
QIII QIV
I
-
+ I
GT
GT
(-)
I
(+)
I
GATE
GT
GT
GATE
MT1
REF
MT1
REF
-65
-40
-40
10
35
60
85
110
125
-
Junction Temperature (TJ)- ºC
MT2 NEGATIVE
(Negative Half Cycle)
Additional Information
ꢀꢁtꢁshꢂꢂt
ꢀꢁsoꢂrꢃꢁs
ꢀꢁꢂꢃꢄꢅs
© 2020 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: BO.11/17/20
Thyristors
4 Amp Sensitive & Standard Triacs
Figure 3: Normalized DC Holding Current
vs. JunctionTemperature
Figure 4: Normalized DC GateTriggerVoltage for
All Quadrants vs. JunctionTemperature
4.0
3.0
2.0
1.0
0.0
2.0
1.5
1.0
0.5
0.0
-65
-40
-40
10
35
60
85
110
125
-65
-40
-40
10
35
60
85
110
125
Junction Temperature (TJ)- ºC
Junction Temperature (TJ)- ºC
Figure 5: Power Dissipation (Typical)
vs. RMS On-State Current
Figure 6: Maximum Allowable CaseTemperature
vs. On-State Current
4.0
125
CURRENTWAVE FORM: Sinusoidal
Qxx04Ry
LOAD: Resistive or Inductive
Qxx04Vy
Qxx04Dy
120
115
CONDUCTION ANGLE: 360°
CASETEMPERATURE: Measured
as shown on Dimensional Drawing
CURRENTWAVE FORM: Sinusoidal
3.0
2.0
1.0
0.0
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360°
110
105
100
95
Qxx04Ly
90
85
80
75
0.0
1.0
2.0
3.0
4.0
5.0
0
1
2
3
4
5
6
RMS On-State Current (IT(RMS)) - Amps
RMS On-State Current (IT(RMS)) - Amps
Figure 7: Maximum Allowable CaseTemperature
vs. On-State Current
Figure 8: Maximum Allowable AmbientTemperature
vs. On-State Current
120
110
CURRENTWAVE FORM: Sinusoidal
LOAD: Resistive or Inductive
Lxx04Ry
Lxx04Vy
Lxx04Dy
CURRENTWAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360°
FREE AIR RATING – NO HEATSINK
105
100
95
90
85
80
75
70
65
60
CONDUCTION ANGLE: 360°
CASETEMPERATURE: Measured
as shown on Dimensional Drawing
100
Lxx04Ly
80
Qxx04Ly
Qxx04Ry
60
L/Qxx04Vy
40
Lxx04Ly
20
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
0
1
2
3
4
5
6
RMS On-State Current (IT(RMS)) - Amps
RMS On-State Current [IT(RMS)] - Amps
Note: xx = voltage/10, y = sensitivity
© 2020 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: BO.11/17/20
Thyristors
4 Amp Sensitive & Standard Triacs
Figure 9: On-State Current vs. On-StateVoltage (Typical)
20
18
16
14
12
10
8
TJ = 25°C
6
4
2
0
0.6
0.8
1.0
1.2
1.4
1.6
1.8
Positive or Instantaneous
On-StateVoltage (VT) -Volts
Figure 10: Surge Peak On-State Current vs. Number of Cycles
100
Qxx04Ry
Qxx04Ly
Qxx04Dy
Qxx04Vy
Supply Frequency: 60Hz Sinusoidal
Load: Resistive
RMS On-State [IT(RMS)]: Max Rated Value at
Specific Case Temperature
Notes:
Lxx04Ry
1. Gate control may be lost during and immediately
following surge current interval.
2. Overload may not be repeated until junction
temperature has returned to steady-state
rated value.
10
Lxx04Ly
Lxx04Dy
Lxx04Vy
1
1
10
100
1000
Surge Current Duration – Full Cycles
Note: xx = voltage/10, y = sensitivity
© 2020 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: BO.11/17/20
Thyristors
4 Amp Sensitive & Standard Triacs
Soldering Parameters
Reflow Condition
Pb – Free assembly
tP
TP
-Temperature Min (Ts(min)
-Temperature Max (Ts(max)
-Time (min to max) (ts)
)
150°C
Ramp-up
TL
TS(max)
Pre Heat
)
200°C
tL
60 – 180 secs
Ramp-down
Preheat
Average ramp up rate (LiquidusTemp) (TL) to
peak
5°C/second max
TS(min)
tS
T
S(max) toTL - Ramp-up Rate
5°C/second max
217°C
-Temperature (TL) (Liquidus)
-Temperature (tL)
25
Reflow
time to peak temperature
60 – 150 seconds
260°C +0/-5
Time
PeakTemperature (TP)
Time within 5°C of actual peakTemperature
(tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max
8 minutes Max.
280°C
Time 25°C to peakTemperature (TP)
Do not exceed
Physical Specifications
Environmental Specifications
Test
Specifications and Conditions
Terminal Finish
Body Material
100% MatteTin-plated
MIL-STD-750, M-1040, Cond A Applied Peak
AC voltage @ 125°C for 1008 hours
AC Blocking
UL Recognized compound meeting flammability
rating V-0
MIL-STD-750, M-1051,
100 cycles; -40°C to +150°C; 15-min dwell
time
Temperature Cycling
Terminal Material
Copper Alloy
EIA / JEDEC, JESD22-A101
1008 hours; 320V - DC: 85°C; 85%
rel humidity
Temperature/Humidity
MIL-STD-750, M-1031,
1008 hours; 150°C
HighTemp Storage
Low-Temp Storage
Design Considerations
1008 hours; -40°C
Careful selection of the correct component for the
application’s operating parameters and environment will
go a long way toward extending the operating life of the
Thyristor. Good design practice should limit the maximum
continuous current through the main terminals to 75% of
the component rating. Other ways to ensure long life for
a power discrete semiconductor are proper heat sinking
and selection of voltage ratings for worst case conditions.
Overheating, overvoltage (including dv/dt), and surge
currents are the main killers of semiconductors. Correct
mounting, soldering, and forming of the leads also help
protect against component damage.
Resistance to
Solder Heat
MIL-STD-750 Method 2031
Solderability
Lead Bend
ANSI/J-STD-002, category 3, Test A
MIL-STD-750, M-2036 Cond E
© 2020 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: BO.11/17/20
Thyristors
4 Amp Sensitive & Standard Triacs
Dimensions —TO-220AB (R-Package) — Non-Isolated MountingTab Common with Center Lead
AREA (REF.) 0.17 IN2
Inches
Millimeters
Min
T
C MEASURING POINT
Dimension
Min
Max
0.420
0.115
0.250
0.620
0.147
0.130
0.575
0.035
0.205
0.105
0.075
0.095
0.024
0.188
0.060
0.048
Max
10.67
2.92
6.35
15.75
3.73
3.30
14.61
0.89
5.21
2.67
1.91
O
8.13
.320
A
E
P
A
B
C
D
E
0.380
0.105
0.230
0.590
0.142
0.110
0.540
0.025
0.195
0.095
0.060
0.085
0.018
0.178
0.045
0.038
9.65
2.67
5.84
14.99
3.61
2.79
13.72
0.64
4.95
2.41
1.52
MT2
B
C
13.36
.526
D
7. 01
.276
F
G
H
J
NOTCH IN
GATE LEAD
TO ID.
NON-ISOLATED
TAB
F
K
L
R
G
L
M
N
O
P
2.16
0.46
4.52
1.14
2.41
0.61
4.78
1.52
H
K
N
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
J
M
R
0.97
1.22
MT1 MT2
GATE
Dimensions —TO-220AB (L-Package) — Isolated MountingTab
T
C MEASURING POINT
AREA (REF.) 0.17 IN2
Inches
Millimeters
Dimension
O
Min
Max
0.420
0.115
0.250
0.620
0.147
0.130
0.575
0.035
0.205
0.105
0.075
0.095
0.024
0.188
0.060
0.048
Min
9.65
2.67
5.84
14.99
3.61
2.79
13.72
0.64
4.95
2.41
1.52
Max
10.67
2.92
6.35
15.75
3.73
3.30
14.61
0.89
5.21
2.67
1.91
8.13
.320
A
E
P
A
B
C
D
E
0.380
0.105
0.230
0.590
0.142
0.110
0.540
0.025
0.195
0.095
0.060
0.085
0.018
0.178
0.045
0.038
B
C
13.36
.526
D
7. 01
.276
F
G
H
J
F
K
L
R
G
L
M
N
O
P
2.16
0.46
4.52
1.14
2.41
0.61
4.78
1.52
H
K
N
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
J
MT1 MT2
M
R
0.97
1.22
GATE
© 2020 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: BO.11/17/20
Thyristors
4 Amp Sensitive & Standard Triacs
Dimensions —TO-251AA (V-Package) —V-PAKThrough Hole
Inches
Typ
Millimeters
Typ
TC MEASURING POINT
AREA: 0.040 IN2
Dim
Min
Max
0.043
0.245
0.375
0.213
0.265
0.033
0.093
0.095
0.184
0.023
0.039
0.023
0.052
0.044
0.044
0.084
Min
0.94
5.97
8.89
5.21
6.48
0.69
2.21
2.16
4.47
0.46
0.90
0.46
1.06
0.86
0.86
1.86
Max
1.09
6.22
9.53
5.41
6.73
0.84
2.36
2.41
4.67
0.58
1.00
0.58
1.32
1.11
E
H
J
5.28
.208
MT2
A
A
B
C
D
E
F
0.037
0.235
0.350
0.205
0.255
0.027
0.087
0.085
0.176
0.018
0.035
0.018
0.042
0.034
0.034
0.074
0.040
0.242
0.361
0.208
0.262
0.031
0.090
0.092
0.180
0.020
0.037
0.020
0.047
0.039
0.039
0.079
1.01
D
6.15
9.18
5.29
6.66
0.80
2.28
2.34
4.57
0.51
0.95
0.52
1.20
5.34
.210
B
R
P
Q
S
G
H
I
K
C
J
K
L
MT1
L
F
MT2
GATE
P
Q
R
S
G
I
1.00
1.00
1.11
2.00
2.11
Dimensions —TO-252AA (D-Package) — D-PAK Surface Mount
E
6.71
.264
Inches
Typ
Millimeters
Typ
MT2
A
5.28
.208
TC MEASURING POINT
D
Dim
Min
0.037
0.235
0.106
0.205
0.255
0.027
0.087
0.085
0.176
0.018
0.035
0.018
0.000
0.021
0°
Max
0.043
0.245
0.113
0.213
0.265
0.033
0.093
0.095
0.184
0.023
0.039
0.023
0.004
0.027
5°
Min
0.94
5.97
2.69
5.21
6.48
0.69
2.21
2.16
4.47
0.46
0.90
0.46
0.00
0.53
0°
Max
1.09
6.22
2.87
5.41
6.73
0.84
2.36
2.41
4.67
0.58
1.00
0.58
0.10
0.69
5°
A
B
C
D
E
0.040
0.243
0.108
0.208
0.262
0.031
0.090
0.092
0.179
0.020
0.037
0.020
0.000
0.026
0°
1.01
6.71
.264
5.34
.210
6.16
2.74
B
5.29
6.65
0.80
2.28
2.33
4.55
0.51
0.95
0.51
0.00
0.67
0°
1.60
.063
P
Q
C
1.80
.071
F
GATE
F
AREA: 0.040 IN2
MT1
MT2
G
H
I
3
.118
4.60
.181
G
I
J
L
O
H
K
L
K
J
M
M
N
O
P
N
0.042
0.034
0.047
0.039
0.052
0.044
1.06
0.86
1.20
1.32
1.11
Q
1.00
© 2020 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: BO.11/17/20
Thyristors
4 Amp Sensitive & Standard Triacs
Product Selector
Voltage
Gate Sensitivity Quadrants
Part Number
Type
Package
400V
X
600V
800V
1000V
I – II – III
3 mA
3 mA
3mA
IV
3 mA
3 mA
3mA
3 mA
5 mA
5 mA
5mA
5 mA
10 mA
10 mA
10mA
10 mA
20 mA
20 mA
20mA
20 mA
-
Lxx04L3
Lxx04D3
Lxx04R3
Lxx04V3
Lxx04L5
Lxx04D5
Lxx04R5
Lxx04V5
Lxx04L6
Lxx04D6
Lxx04R6
Lxx04V6
Lxx04L8
Lxx04D8
Lxx04R8
Lxx04V8
Qxx04L3
Qxx04D3
Qxx04V3
Qxx04R3
Qxx04L4
Qxx04D4
Qxx04R4
Qxx04V4
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
-
-
-
-
SensitiveTriac
SensitiveTriac
SensitiveTriac
SensitiveTriac
SensitiveTriac
SensitiveTriac
SensitiveTriac
SensitiveTriac
SensitiveTriac
SensitiveTriac
SensitiveTriac
SensitiveTriac
SensitiveTriac
SensitiveTriac
SensitiveTriac
SensitiveTriac
StandardTriac
StandardTriac
StandardTriac
StandardTriac
StandardTriac
StandardTriac
StandardTriac
StandardTriac
TO-220L
TO-252 D-PAK
TO-220R
X
X
-
-
X
-
-
3 mA
5 mA
5 mA
5mA
TO-251 V-PAK
TO-220L
X
-
-
X
-
-
TO-252 D-PAK
TO-220R
X
-
-
X
-
-
5 mA
5 mA
5 mA
5mA
TO-251 V-PAK
TO-220L
X
-
-
X
-
-
TO-252 D-PAK
TO-220R
X
-
-
X
-
-
5 mA
10 mA
10 mA
10mA
10 mA
10 mA
10 mA
10 mA
10mA
25 mA
25 mA
25mA
25 mA
TO-251 V-PAK
TO-220L
X
-
-
X
-
-
TO-252 D-PAK
TO-220R
X
-
-
X
-
-
TO-251 V-PAK
TO-220L
X
X
X
X
X
X
X
X
X
-
X
-
-
TO-252 D-PAK
TO-251 V-PAK
TO-220R
X
-
-
X
-
-
X
X
X
X
X
-
TO-220L
X
-
TO-252 D-PAK
TO-220R
X
-
X
-
TO-251 V-PAK
Packing Options
Part Number
L/Qxx04LyTP
Marking
Weight
2.2 g
0.3 g
0.3 g
0.4 g
2.2g
Packing Mode
Tube
Base Quantity
1000 (50 per tube)
2500
L/Qxx04Ly
L/Qxx04Dy
L/Qxx04Dy
L/Qxx04Vy
L/Qxx04Ly
L/Qxx04Ry
L/Qxx04DyRP
Embossed Carrier
Tube Pack
Tube Pack
Tube
L/Qxx04DyTP
750 (75 per tube)
750 (75 per tube)
1000 (50 per tube)
1000 (50 per tube)
L/Qxx04VyTP
L/Qxx04LyTP
L/Qxx04RyTP
2.2g
Tube
Note: xx = Voltage/10; y = Sensitivity
© 2020 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: BO.11/17/20
Thyristors
4 Amp Sensitive & Standard Triacs
TO-252 Embossed Carrier Reel Pack (RP) Specifications
Meets all EIA-481-2 Standards
0.157
(4.0)
0.059
(1.5)
DIA
Gate
MT1
0.63
(16.0)
*
0.524
(13.3)
* Cover tape
MT2
0.315
(8.0)
12.99
(330.0)
Dimensions
are in inches
(and millimeters).
0.512 (13.0) Arbor
Hole Dia.
0.64
(16.3)
Direction of Feed
Part Numbering System
Q 60 04 L 4 xx
Part Marking System
TO-251AA- (V Package)
TO-252AA- (D Package)
Lead Form Dimensions
xx : Lead Form Option
Device Type
L : Sensitive Triac
Q : Standard Triac
L6004V4
YMLDD
L6004V4
Sensitivity & Type
Sensitive Triac:
3 : 3 mA (QI, II, III, IV)
5 : 5 mA (QI, II, III, IV)
6 : 5 mA (QI, II, III)
10 mA (QIV)
8 : 10 mA (QI, II, III)
20 mA (QIV)
Standard Triac:
3 : 10 mA (QI, II, III)
4 : 25 mA (QI, II, III)
Voltage Rating
YMLDD
®
®
40 : 400V
60 : 600V
80 : 800V
K0 : 1000V
Date Code Marking
Y:Year Code
M: Month Code
L: Location Code
DD: Calendar Code
TO-220 AB - (L and R Package)
Current Rating
04 : 4A
Package Type
Q6004R4
YMXXX
L : TO-220 Isolated
R : TO-220 Non-Isolated
V : TO-251 (V-Pak)
D : TO-252 (D-Pak)
®
Date Code Marking
Y:Year Code
M: Month Code
XXX: Lot Trace Code
Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users
should independently evaluate the suitability of and test each product selected for their own
applications. Littelfuse products are not designed for, and may not be used in, all applications.
Read complete Disclaimer Notice at http://www.littelfuse.com/disclaimer-electronics.
© 2020 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: BO.11/17/20
相关型号：
©2020 ICPDF网 联系我们和版权申明