KXXX0EH70RP2 [LITTELFUSE]

It is offered in a DO-15 and TO-92 leaded packages; 它提供了DO -15和TO- 92引脚封装
KXXX0EH70RP2
型号: KXXX0EH70RP2
厂家: LITTELFUSE    LITTELFUSE
描述:

It is offered in a DO-15 and TO-92 leaded packages
它提供了DO -15和TO- 92引脚封装

文件: 总10页 (文件大小:243K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
                                                                
to 280V  
tꢀꢀ3P)4ꢀ$PNQMJBOU  
                                                                                       
Teccor® brandThyristors  
High Energy Bidirectional SIDACs  
Kxxx0yH Series  
Description  
The new Kxxx0yH is a higher energy SIDAC switch for gas  
ignition applications requiring higher current pulse current  
especially at low repetition rate. It is offered in a DO-15 and  
TO-92 leaded packages as well as DO-214 surface mount  
package. Voltage activation of this solid state switch is  
accomplished with peak voltage level of 190 to 280Volts. The  
SIDAC is a silicon bilateral voltage triggeredThyristor switch  
that switches on through a negative resistance region to a  
low on-state voltage. Conduction will continue until current  
is interrupted or lowered below minimum holding current of  
the device.  
Features  
tꢀꢀ  
"$ꢀ$JSDVJUꢀ0SJFOUFE  
tꢀꢀ  
ꢄꢅꢃ"ꢀ1VMTFꢀ$VSSFOUꢀ  
Schematic Symbol  
Capability  
tꢀ5SJHHFSJOHꢀ7PMUBHFꢀPGꢀꢁꢂꢃꢀ  
Applications  
Suitable for high voltage power supplies, natural gas  
igniters, and Xenon flash ignition.  
Electrical Specifications (T = 25°C, unless otherwise specified)  
J
Symbol  
Parameters  
Test Conditions  
Min  
Max  
Unit  
K2000yH  
K2200yH  
K2400yH  
K2500yH  
K2000yH  
K2200yH  
K2400yH  
K2500yH  
190  
205  
220  
240  
180  
180  
190  
200  
215  
230  
250  
280  
VBO  
Breakover/Trigger Voltage  
V
VDRM  
Repetitive Peak Off-state Voltage  
V
IT(RMS)  
VTM  
50/60Hz, T < 125°C  
On-state RMS Current  
Peak On-state Voltage  
1
1.5  
A
V
J
IT = 1A  
RL = 100Ω  
50/60Hz Sine Wave  
IH  
Dynamic Holding Current  
150  
100  
mA  
(VBO – VS)  
________  
RS  
Switching Resistance, RS=  
50/60Hz Sine Wave  
8
(IS – IBO  
)
IBO  
Breakover Current  
50/60Hz Sine Wave  
60Hz  
50  
μA  
A
120  
280  
150  
Peak Repetitive Pulse Current  
(refer to figure 4)  
ITRM  
di/dt  
tp = 10μs  
5Hz  
Critical Rate of Rise of On-State Current  
Critical Rate of Rise of Off-State Voltage  
StorageTemperature Range  
A/μs  
V/μs  
°C  
dv/dt  
TS  
1500  
-40  
-40  
150  
125  
18  
30  
35  
T
JunctionTemperature Range  
°C  
J
DO-15  
DO-214  
DO-92  
RRJL  
RRJC  
Thermal Resistance, Junction to Lead  
Thermal Resistance, Junction to Case  
°C/W  
°C/W  
DO-15  
DO-92  
75  
95  
RRJA  
Thermal Resistance, Junction to Ambient  
°C/W  
Note: xxx - voltage, y = package  
Kxxx0yH Series  
©2008 Littelfuse, Inc.  
321  
Revised: August 29, 2008  
Specifications are subject to change without notice.  
Please refer to http://www.littelfuse.com for current information.  
Teccor® brandThyristors  
High Energy Bidirectional SIDACs  
Figure 2: On-state Current vs. On-state  
Voltage (Typical)  
Figure 1:V-I Characteristics  
+I  
9
8
7
6
5
4
3
2
1
0
IT  
IH  
RS  
IS  
IBO  
IDRM  
-V  
+V  
VBO  
VS  
VT  
(VBO - VS)  
=
RS  
VDRM  
(IS - IBO  
)
0.6  
0.8  
1.0  
1.2  
1.4  
1.6  
1.8  
2.0  
Instantaneous On-stateVoltage (vT) Volts  
-I  
Figure 3: Power Dissipation vs. On-state Current  
(Typical)  
Figure 4: Repetitive Peak On-state Current (ITRM)  
vs. PulseWidth atVarious Frequencies  
1.2  
1.0  
0.8  
0.6  
1000  
100  
10  
di/dt Limit Line  
ITM  
tO  
1/f  
1 kHz  
5 Hz  
60 Hz  
5 kHz  
0.4  
CURRENT WAVEFORM: Sinusoidal  
LOAD: Resistive or Inductive  
CONDUCTION ANGLE:  
0.2  
0.0  
See basic SIDAC circuit in Figure 12  
1
0.0  
0.2  
0.4  
0.6  
0.8  
1.0  
1.2  
1
10  
100  
1000  
RMS On-State Current [IT(RMS)] - Amps  
Pulse BaseWidth (tO) - us  
Figure 5: Surge Peak On-state Current  
vs. Number of Cycles  
Figure 6: NormalizedVBO Change  
vs. JunctionTemperature  
10%  
8%  
100  
SUPPLY FREQUENCY: 60 Hz Sinusoidal  
LOAD: Resistive  
RMS ON-STATE CURRENT: ITRMS Maximum Rated  
Value at Specified Junction Temperature  
6%  
4%  
2%  
10  
0%  
-2%  
-4%  
-6%  
-8%  
Notes:  
1) Blocking capability may be lost during  
and immediately following surge  
current interval.  
2) Overload may not be repeated until  
junction temperature has returned  
to steady-state rated value.  
1
-40  
-20  
0
20  
40  
60  
80  
100  
120  
140  
1
10  
100  
1000  
JunctionTemperature (TJ) -- °C  
Surge Current Duration -- Full Cycles  
Kxxx0yH Series  
©2008 Littelfuse, Inc.  
322  
Revised: August 29, 2008  
Specifications are subject to change without notice.  
Please refer to http://www.littelfuse.com for current information.  
Teccor® brandThyristors  
High Energy Bidirectional SIDACs  
Figure 7: Normalized DC Holding Current  
vs. JunctionTemperature  
Figure 8: Maximum Allowable CaseTemperature  
vs. RMS On-State Current  
130  
2.0  
1.5  
1.0  
0.5  
0.0  
120  
Kxxx0GH  
110  
Kxxx0SH  
Kxxx0EH  
100  
90  
CURRENT WAVEFORM: Sinusoidal - 60Hz  
LOAD: Resistive or Inductive  
80  
0.0  
0.2  
0.4  
0.6  
0.8  
1.0  
1.2  
125  
-40  
-15  
10  
35  
60  
85  
110  
JunctionTemperature (TJ) -- °C  
RMS On-State Current [IT(RMS)] - Amps  
Figure 9: Maximum Allowable AmbientTemperature  
vs. RMS On-State Current  
Figure 10: Normalized Repetitive Peak Breakover  
Current (IBO) vs. JunctionTemperature  
10  
140  
CURRENT WAVEFORM: Sinusoidal - 60Hz  
LOAD: Resistive or Inductive  
120  
100  
80  
FREE AIR RATING  
Kxxx0GH  
Kxxx0SH  
Kxxx0EH  
60  
40  
1
20  
20  
30  
40  
50  
60  
70  
80  
90  
100  
110  
120  
130  
0.0  
0.2  
0.4  
0.6  
0.8  
1.0  
RMS On-State Current [IT(RMS)] - Amps  
JunctionTemperature (TJ) -- °C  
Figure 11: Dynamic Holding CurrentTest  
Circuit for SIDACs  
Figure 12: Basic SIDAC Circuit  
Push to test  
Switch to test  
in each direction  
S1  
100-250 V ac  
60 Hz  
Device  
Under  
Test  
100  
1%  
VBO  
VBO  
VBO  
100-250 V ac  
60 Hz  
S1  
IH  
Load  
Scope  
IH  
IH  
IPK  
120-145  
Conduction  
Angle  
˚
Trace Stops  
Load Current  
IH  
Scope Indication  
Kxxx0yH Series  
©2008 Littelfuse, Inc.  
323  
Revised: August 29, 2008  
Specifications are subject to change without notice.  
Please refer to http://www.littelfuse.com for current information.  
Teccor® brandThyristors  
High Energy Bidirectional SIDACs  
Figure 13: Relaxation Oscillator Using a SIDAC  
Figure 14: General Gas Ignitor Circuit  
(a) Circuit  
SCR  
Sidac  
(b) Waveforms  
V
BO  
V
R
SIDAC  
C
V
V  
B0  
V
DC(IN)  
C
100-250 V ac  
60 Hz  
100-250 V ac  
60 Hz  
t
t
I
C
L
R
L
I
L
V
V
- V  
BO  
- V  
IN  
BO  
R
max  
I
IN  
TM  
R
min  
I
H (MIN)  
Soldering Parameters  
Reflow Condition  
Pb – Free assembly  
tP  
TP  
-Temperature Min (Ts(min)  
)
150°C  
Ramp-up  
TL  
TS(max)  
Pre Heat -Temperature Max (Ts(max)  
-Time (min to max) (ts)  
)
200°C  
tL  
60 – 180 secs  
Ramp-down  
Preheat  
Average ramp up rate (LiquidusTemp)  
(TL) to peak  
5°C/second max  
TS(min)  
tS  
TS(max) toTL - Ramp-up Rate  
5°C/second max  
217°C  
-Temperature (TL) (Liquidus)  
Reflow  
25  
time to peak temperature  
-Temperature (tL)  
60 – 150 seconds  
260+0/-5 °C  
Time  
PeakTemperature (TP)  
Time within 5°C of actual peak  
Temperature (tp)  
20 – 40 seconds  
Ramp-down Rate  
5°C/second max  
8 minutes Max.  
280°C  
Time 25°C to peakTemperature (TP)  
Do not exceed  
Kxxx0yH Series  
©2008 Littelfuse, Inc.  
324  
Revised: August 29, 2008  
Specifications are subject to change without notice.  
Please refer to http://www.littelfuse.com for current information.  
Teccor® brandThyristors  
High Energy Bidirectional SIDACs  
Physical Specifications  
Reliability/EnvironmentalTests  
Test  
Specifications and Conditions  
Terminal Material  
Terminal Finish  
Body Material  
Copper Alloy  
MIL-STD-750: Method 1040, Condition  
A Rated VDRM (VAC-peak), 125°C, 1008  
hours  
HighTemperature  
Voltage Blocking  
100% MatteTin-plated /Pb Free  
solder dipped.  
MIL-STD-750: Method 1051  
Temperature Cycling -40°C to 150°C, 15-minute dwell, 100  
UL recognized epoxy meeting flammability  
classification 94V-0.  
cycles  
BiasedTemperature & EIA/JEDEC: JESD22-A101  
Humidity  
(VDC), 85°C, 85%RH, 1008 hours  
MIL-STD-750: Method 1031  
150°C, 1008 hours  
Design Considerations  
HighTemp Storage  
Low-Temp Storage  
Careful selection of the correct device for the applications  
operating parameters and environment will go a long  
way toward extending the operating life of theThyristor.  
Overheating and surge currents are the main killers of  
SIDACs. Correct mounting, soldering, and forming of the  
leads also help protect against component damage.  
-40°C, 1008 hours  
MIL-STD-750: Method 1056  
0°C to 100°C, 5-minute dwell, 10-second  
transfer, 10 cycles  
Thermal Shock  
Autoclave  
EIA/JEDEC: JESD22-A102  
(Pressure CookerTest) 121°C, 100%RH, 2atm, 168 hours  
Resistance to  
Solder Heat  
MIL-STD-750: Method 2031  
260°C, 10 seconds  
Solderability  
ANSI/J-STD-002: Category 3  
Repetitive Surge  
LifeTesting  
MIL-STD-750: Method 2036, Condition E  
Dimensions — DO-214  
B
CASE TEMPERATURE  
MEASURING POINT  
Inches  
Millimeters  
D
Dimension  
Max  
Max  
Min  
Max  
A
B
C
D
E
F
0.130  
0.201  
0.077  
0.159  
0.030  
0.075  
0.002  
0.077  
0.043  
0.006  
0.030  
0.156  
3.30  
5.10  
1.95  
4.05  
0.75  
1.90  
0.05  
1.95  
1.09  
0.15  
0.76  
3.95  
0.220  
0.087  
0.181  
0.063  
0.096  
0.008  
0.104  
0.053  
0.016  
0.055  
5.60  
2.20  
4.60  
1.60  
2.45  
0.20  
2.65  
1.35  
0.41  
1.40  
A
C
K
H
F
L
G
E
J
G
H
J
0.079"  
(2.0mm)  
K
L
0.110"  
(2.8mm)  
0.079"  
(2.0mm)  
Recommended  
Soldering Pad Outline  
Kxxx0yH Series  
©2008 Littelfuse, Inc.  
325  
Specifications are subject to change without notice.  
Please refer to http://www.littelfuse.com for current information.  
Revised: August 29, 2008  
Teccor® brandThyristors  
High Energy Bidirectional SIDACs  
Dimensions — DO-15  
Inches  
Millimeters  
Temperature Measuring Point  
Dimension  
ØD  
Max  
Max  
0.034  
0.140  
0.270  
Min  
Max  
0.864  
3.556  
6.858  
ØB  
ØB  
ØD  
G
0.028  
0.120  
0.235  
1.000  
0.711  
3.048  
5.969  
25.400  
L
G
L
L
Dimensions -TO-92 withType 70 Lead Form  
Temperature Measuring Point  
Inches  
Millimeters  
Dimension  
Max  
0.176  
0.500  
0.095  
0.150  
0.046  
0.135  
0.088  
0.176  
0.088  
0.013  
0.013  
Max  
Min  
4.47  
12.70  
2.41  
3.81  
1.16  
Max  
A
A
0.196  
4.98  
N
B
D
0.105  
2.67  
E
B
F
0.054  
0.145  
0.096  
0.186  
0.096  
0.019  
0.017  
0.060  
1.37  
3.68  
2.44  
4.73  
2.44  
0.48  
0.43  
1.52  
G
3.43  
2.23  
4.47  
2.23  
0.33  
0.33  
H
J
MT1  
MT2  
K
E
L
M
G
H
M
F
N
L
D
Notes:  
1. Type 70 lead form as shown is standard for the E package.  
2. All leads are insulated from case. Case is electrically nonconductive (rated at 16000V ac  
rms for one minute from leads to case over the operating temperature range.)  
3. Mold flash shall not exceed 0.13 mm per side.  
Product Selector  
Switching Voltage Range  
Part Number  
Blocking Voltage  
Packages  
DO-214  
VBO Minimum  
VBO Maximum  
VDRM  
DO-15  
TO-92  
K2000yH  
K2200yH  
K2400yH  
190V  
215V  
230V  
250V  
280V  
180V  
K2000GH  
K2200GH  
K2400GH  
K2500GH  
K2000SH  
K2000EH70  
K2200EH70  
K2400EH70  
K2500EH70  
205V  
180V  
190V  
200V  
K2200SH  
K2400SH  
K2500SH  
220V  
K2500yH  
240V  
Note: y = package  
Kxxx0yH Series  
©2008 Littelfuse, Inc.  
326  
Specifications are subject to change without notice.  
Please refer to http://www.littelfuse.com for current information.  
Revised: August 29, 2008  
Teccor® brandThyristors  
High Energy Bidirectional SIDACs  
Packing Options  
Part Number  
Kxxx0GH  
Marking  
Kxxx0GH  
Kxxx0GH  
KxxSH  
Weight  
0.38g  
0.38g  
0.1g  
Packaging Mode  
Bulk  
Base Quantity  
1000  
Kxxx0GHRP  
Kxxx0SHRP  
Kxxx0EH70  
Reel Pack  
Reel Pack  
Bulk  
5000  
2500  
Kxxx0EH  
Kxxx0EH  
Kxxx0EH  
Kxxx0EH  
0.17g  
0.17g  
0.17g  
0.17g  
2000  
Kxxx0EH70AP  
Kxxx0EH70RP2  
Ammo Pack  
Reel Pack  
Reel Pack  
2000  
2000  
Kxxx0EH70RP3  
2000  
Note: xxx or xx = voltage  
DO-214 Embossed Carrier Reel Pack (RP) Specifications  
Meets all EIA-481-1 Standards  
0.157  
(4.0)  
0.472  
(12.0)  
0.36  
(9.2)  
0.315  
(8.0)  
0.059  
(1.5)  
DIA  
Cover tape  
12.99  
(330.0)  
0.512 (13.0) Arbor  
Hole Dia.  
Dimensions  
are in inches  
(and millimeters).  
0.49  
(12.4)  
Direction of Feed  
Kxxx0yH Series  
©2008 Littelfuse, Inc.  
327  
Revised: August 29, 2008  
Specifications are subject to change without notice.  
Please refer to http://www.littelfuse.com for current information.  
Teccor® brandThyristors  
High Energy Bidirectional SIDACs  
DO-15 Reel Pack (RP) Specifications  
Meets all EIA RS-296 Standards  
DO-15  
10.0 - 14.0  
(254.0 - 356.0)  
2.063  
(52.4)  
3.15 (80.0) TYP  
0.898  
(22.8)  
Direction of Feed  
Dimensions  
0.252  
(6.4)  
are in inches  
(and millimeters).  
0.197  
(5.0)  
TO-92Type 70 Ammo Pack (AP) Radial Leaded Specifications  
Meets all EIA-468-B 1994 Standards  
0.25  
(6.35)  
0.50  
(12.7)  
0.02 (0.5)  
0.236  
(6.0)  
0.125 (3.2) MAX  
1.62  
(41.2)  
MAX  
1.27  
(32.2)  
0.708  
(18.0)  
0.354  
(9.0)  
0.50  
(12.7)  
0.157  
(4.0)  
DIA  
0.20 (5.08)  
Flat down  
25 Devices per fold  
1.85  
(47.0)  
12.2  
(310.0)  
Dimensions  
are in inches  
(and millimeters).  
1.85  
(47.0)  
13.3  
(338.0)  
Kxxx0yH Series  
©2008 Littelfuse, Inc.  
328  
Specifications are subject to change without notice.  
Please refer to http://www.littelfuse.com for current information.  
Revised: August 29, 2008  
Teccor® brandThyristors  
High Energy Bidirectional SIDACs  
TO-92Type 70 Reel Pack (RP3) Optional Specifications  
0.02 (0.5)  
0.236  
(6.0)  
0.95  
(24.1)  
1.3  
(33.1)  
0.708  
(18.0)  
0.354  
(9.0)  
0.5  
0.1 (2.54)  
(12.7)  
0.157  
(4.0)  
DIA  
14.17  
Dimensions  
are in inches  
(and millimeters).  
(360.0)  
Flat Up  
1.97  
(50.0)  
Direction of Feed  
TO-92Type 70 Reel Pack (RP2) Standard Specifications  
0.25  
(6.35)  
0.50  
(12.7)  
0.02  
(0.5)  
0.236  
(6.0)  
0.125 (3.2) MAX  
1.27  
(32.2)  
1.62  
(41.2)  
0.708  
(18.0)  
0.354  
(9.0)  
0.50  
(12.7)  
0.20  
(5.08)  
0.157  
(4.0)  
DIA  
14.17  
(360.0)  
Flat Down  
Dimensions  
are in inches  
(and millimeters).  
1.97  
(50.0)  
Direction of Feed  
Kxxx0yH Series  
©2008 Littelfuse, Inc.  
Specifications are subject to change without notice.  
Please refer to http://www.littelfuse.com for current information.  
329  
Revised: August 29, 2008  
Teccor® brandThyristors  
High Energy Bidirectional SIDACs  
Part Numbering System  
Part Marking System  
K 240 0 E H 70 RP  
DO-214  
PACKAGING OPTIONS  
[Blank]: Bulk  
AP: Ammo  
RP: Reel  
RP2: Reel  
K24SH  
yxxxx  
TO-92  
DEVICE TYPE  
K: Sidac  
®
K2400EH  
RP3: Reel  
VOLTAGE  
200: 190 to 215V  
220: 205 to 230V  
240: 220 to 250V  
250: 240 to 280V  
LEAD FORM DIMENSIONS  
xx: Lead Form Option  
yxxxx  
DO-15  
®
HIGH-ENERGY SIDAC  
K2400GH  
PACKAGE TYPE  
G: DO-15  
S: DO-214  
E: TO-92  
CURRENT FUNCTION  
0: Standard  
®
yxxxx  
Kxxx0yH Series  
©2008 Littelfuse, Inc.  
330  
Revised: August 29, 2008  
Specifications are subject to change without notice.  
Please refer to http://www.littelfuse.com for current information.  

相关型号:

KXXX0EH70RP3

It is offered in a DO-15 and TO-92 leaded packages
LITTELFUSE

KXXX0G

SIDACs feature glass-passivated junctions to ensure a rugged and dependable
LITTELFUSE

KXXX0GH

It is offered in a DO-15 and TO-92 leaded packages
LITTELFUSE

KXXX0GHRP

It is offered in a DO-15 and TO-92 leaded packages
LITTELFUSE

KXXX0GRP

SIDACs feature glass-passivated junctions to ensure a rugged and dependable
LITTELFUSE

KXXX0SHRP

It is offered in a DO-15 and TO-92 leaded packages
LITTELFUSE

KXXX0SRP

SIDACs feature glass-passivated junctions to ensure a rugged and dependable
LITTELFUSE

KXXX2G

SIDACs feature glass-passivated junctions to ensure a rugged and dependable
LITTELFUSE

KY-DMLN31.23

SMD epoxy package
OSRAM

KY-DMLN31.FY

SMD epoxy package
OSRAM

KY-DMLQ31.23

SMD epoxy package
OSRAM

KY-DMLQ31.FY

SMD epoxy package
OSRAM