EC103D75 [LITTELFUSE]
Teccor brand Thyristors 0.8 Amp Sensitive SCRs; Teccor牌晶闸管0.8安培敏感可控硅型号: | EC103D75 |
厂家: | LITTELFUSE |
描述: | Teccor brand Thyristors 0.8 Amp Sensitive SCRs |
文件: | 总10页 (文件大小:980K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Teccor® brandThyristors
0.8 Amp Sensitive SCRs
EC103xx & SxSx Series
Description
Excellent unidirectional switches for phase control
applications such as heating and motor speed controls.
Sensitive gate SCRs are easily triggered with microAmps
of current as furnished by sense coils, proximity switches,
and microprocessors.
Features & Benefits
• RoHS compliant
• Voltage capability up
to 600 V
• Glass – passivated
junctions
• Surge capability up to
20 A
Main Features
Applications
Typical applications are capacitive discharge systems
for strobe lights and gas engine ignition. Also controls
for power tools, home/brown goods and white goods
appliances.
Symbol
Value
0.8
Unit
A
IT(RMS)
VDRM/VRRM
400 to 600
12 to 500
V
IGT
μA
Schematic Symbol
A
K
G
Absolute Maximum Ratings — Sensitive SCRs
Symbol
IT(RMS)
IT(AV)
Parameter
Test Conditions
Value
Unit
RMS on-state current
TC = 75°C
0.8
A
Average on-state current
TC = 75°C
0.51
16
A
A
single half cycle; f = 50Hz;
TJ (initial) = 25°C
ITSM
Peak non-repetitive surge current
single half cycle; f = 60Hz;
20
TJ (initial) = 25°C
I2t
I2t Value for fusing
Critical rate of rise of on-state current
Peak gate current
tp = 8.3 ms
f = 60 Hz ;TJ = 110°C
TJ = 110°C
1.6
50
A2s
A/μs
A
di/dt
IGM
1
PG(AV)
Tstg
TJ
Average gate power dissipation
Storage temperature range
0.1
W
TJ = 110°C
-40 to 150
-40 to 110
°C
Operating junction temperature range
°C
EC103xx & SxSx Series
©2011 Littelfuse, Inc
163
Revised: June 21, 2011 04:14 PM
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brandThyristors
0.8 Amp Sensitive SCRs
Electrical Characteristics (TJ = 25°C, unless otherwise specified)
Value
SxS /
2N6565
EC103X
Symbol
Test Conditions
Unit
SxS1
EC103X1
SxS2
EC103X2
SxS3
EC103X3
IGT
MAX.
MAX.
12
50
200
500
µA
VD = 6V; RL = 100 Ω
VD = VDRM; RGK = 1kΩ
VGT
0.8
V
400V
600V
20
10
25
10
30
15
40
20
dv/dt
MIN.
V/μs
VGD
IH
VD = VDRM; RL = 3.3 kΩ; TJ = 110°C
IT = 20mA (initial), RGK = 1kΩ
(1)
MIN.
MAX.
MAX.
TYP.
0.2
0.25
V
mA
μs
5
5
8
tq
60
50
20
45
30
tgt
IG = 2 x IGT; PW = 15µs; IT = 1.6A
2
μs
(1) IT=1A; tp=50µs; dv/dt=5V/µs; di/dt=-5A/µs
Static Characteristics
Symbol
Test Conditions
IT = 1.2A; tp = 380 µs
Value
Unit
VTM
MAX.
MAX.
1.7
1
V
TJ = 25°C
TJ = 100°C
TJ = 110°C
V
= VRRM
RDGRKM= 1kΩ
IDRM / IRRM
50
100
μA
Thermal Resistances
Symbol
Parameter
Value
75
Unit
EC103xy/2N6565
SxSy
Junction to case (AC)
Junction to ambient
°C/W
°C/W
Rθ(J-C)
60*
160
EC103xy/2N6565
Rθ(J-A)
Notes: x = voltage, y = sensitivity
* = Mounted on 1 cm2 copper (two-ounce) foil surface
EC103xx & SxSx Series
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
164
Revised: June 21, 2011 04:14 PM
Teccor® brandThyristors
0.8 Amp Sensitive SCRs
Figure 1: Normalized DC GateTrigger Current
vs. JunctionTemperature
Figure 2: Normalized DC GateTriggerVoltage
vs. JunctionTemperature
4.0
3.0
2.0
1.0
0.0
2.0
1.5
1.0
0.5
0.0
-40
-15
10
35
60
85
110
-40
-15
10
35
60
85
110
Junction Temperature (TJ) -- (°C)
Junction Temperature (TJ) -- (°C)
Figure 3: Normalized DC Holding Current
vs. JunctionTemperature
Figure 4: On-State Current vs. On-State
Voltage (Typical)
3.0
2.5
2.0
1.5
1.0
0.5
0.0
10
TJ = 25°C
8
6
4
2
0
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
-40
-15
10
35
60
85
110
Junction Temperature (TJ) -- (°C)
Instantaneous On-state Voltage (vT) – Volts
Figure 5: Power Dissipation (Typical)
vs. RMS On-State Current
Figure 6: Maximum Allowable CaseTemperature
vs. RMS On-State Current
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
115
105
95
85
75
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
65
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
RMS On-State Current [IT(RMS)] - Amps
RMS On-State Current [IT(RMS)] - Amps
EC103xx & SxSx Series
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
165
Revised: June 21, 2011 04:14 PM
Teccor® brandThyristors
0.8 Amp Sensitive SCRs
Figure 7: Maximum Allowable CaseTemperature
Figure 8: Maximum Allowable AmbientTemperature
vs. RMS On-State Current
vs. Average On-State Current
120
115
105
95
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
100
FREE AIR RATING
80
60
40
20
0
85
75
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
65
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
0.0
0.1
0.2
0.3
0.4
0.5
0.6
Average On-State Current [IT(AVE)] - Amps
RMS On-State Current [IT(RMS)] - Amps
Figure 9: Maximum Allowable AmbientTemperature
vs. Average On-State Current
Figure 10: Peak Capacitor Discharge Current
120
180
160
140
120
100
80
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
100
FREE AIR RATING
1 Hz
80
12 Hz
60 Hz
60
40
20
0
60
ITRM
40
20
tW
0
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
1
10
100
Average On-State Current [IT(AVE)] - Amps
Pulse Current Duration (tW) - μs
Figure 11: Peak Repetitive Sinusoidal Pulse Current
180
160
140
120
1 Hz
100
80
12 Hz
60
ITM
40
60 Hz
20
tW
0
1
10
100
Pulse Current Duration (tW) - μs
EC103xx & SxSx Series
©2011 Littelfuse, Inc
166
Revised: June 21, 2011 04:14 PM
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brandThyristors
0.8 Amp Sensitive SCRs
Figure 12: Surge Peak On-State Current vs. Number of Cycles
100.0
SUPPLY FREQUENCY: 60 Hz Sinusoidal
LOAD: Resistive
RMS On-State Current: [IT(RMS)]: Maximum Rated
Value at Specified Case Temperature
10.0
Notes:
1. Gate control may be lost during and immediately
following surge current interval.
2. Overload may not be repeated until junction
temperature has returned to steady-state
rated value.
1.0
0.1
1
10
100
1000
Surge Current Duration -- Full Cycles
Figure 13: SimpleTest Circuit for GateTriggerVoltage and Current
Reset
Normally-closed
Pushbutton
Note: V1 — 0 V to 10 V dc meter
GT — 0 V to 1 V dc meter
V
IG — 0 mA to 1 mA dc milliammeter
R1 — 1 k potentiometer
To measure gate trigger voltage and current, raise gate
voltage (VGT) until meter reading V1 drops from 6 V to 1 V.
Gate trigger voltage is the reading on VGT just prior to V1
dropping. Gate trigger current IGT Can be computed from
the relationship
100
+
–
D.U.T.
V1
6VDC
IGT
IN4001
IG
R1
100
1 k
(1%)
VGT
VGT
____
IGT = IG-
Amps
1000
where IG is reading (in amperes) on meter just prior to V1
dropping
Note: IGT may turn out to be a negative quantity (trigger
current flows out from gate lead). If negative current
occurs, I value is not a valid reading. Remove 1 k resistor
and use IGGT as the more correct IGT value. This will occur on
12 µA gate products.
EC103xx & SxSx Series
©2011 Littelfuse, Inc
167
Revised: June 21, 2011 04:14 PM
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brandThyristors
0.8 Amp Sensitive SCRs
Soldering Parameters
Reflow Condition
Pb – Free assembly
tP
TP
-Temperature Min (Ts(min)
)
150°C
Ramp-up
TL
TS(max)
Pre Heat -Temperature Max (Ts(max)
)
200°C
tL
-Time (min to max) (ts)
60 – 180 secs
Ramp-down
Preheat
Average ramp up rate (LiquidusTemp)
(TL) to peak
5°C/second max
TS(min)
tS
TS(max) toTL - Ramp-up Rate
5°C/second max
217°C
-Temperature (TL) (Liquidus)
Reflow
25
time to peak temperature
-Temperature (tL)
60 – 150 seconds
260+0/-5 °C
Time
PeakTemperature (TP)
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max
8 minutes Max.
280°C
Time 25°C to peakTemperature (TP)
Do not exceed
Physical Specifications
Environmental Specifications
Test
AC Blocking
Specifications and Conditions
100% MatteTin-plated/Pb-free Solder
Dipped
Terminal Finish
Body Material
Lead Material
MIL-STD-750, M-1040, Cond A Applied
Peak AC voltage @ 110°C for 1008 hours
UL recognized epoxy meeting flammability
classification 94V-0
MIL-STD-750, M-1051,
100 cycles; -40°C to +150°C; 15-min
dwell-time
Temperature Cycling
Copper Alloy
EIA / JEDEC, JESD22-A101
1008 hours; 320V - DC: 85°C; 85%
rel humidity
Temperature/
Humidity
MIL-STD-750, M-1031,
1008 hours; 150°C
HighTemp Storage
Low-Temp Storage
Design Considerations
1008 hours; -40°C
Careful selection of the correct device for the application’s
operating parameters and environment will go a long way
toward extending the operating life of theThyristor. Good
design practice should limit the maximum continuous
current through the main terminals to 75% of the device
rating. Other ways to ensure long life for a power discrete
semiconductor are proper heat sinking and selection of
voltage ratings for worst case conditions. Overheating,
overvoltage (including dv/dt), and surge currents are
the main killers of semiconductors. Correct mounting,
soldering, and forming of the leads also help protect
against component damage.
MIL-STD-750, M-1056
10 cycles; 0°C to 100°C; 5-min dwell-
time at each temperature; 10 sec (max)
transfer time between temperature
Thermal Shock
Autoclave
EIA / JEDEC, JESD22-A102
168 hours (121°C at 2 ATMs) and
100% R/H
Resistance to
Solder Heat
MIL-STD-750 Method 2031
Solderability
Lead Bend
ANSI/J-STD-002, category 3, Test A
MIL-STD-750, M-2036 Cond E
EC103xx & SxSx Series
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
168
Revised: June 21, 2011 04:14 PM
Please refer to http://www.littelfuse.com for current information.
Teccor® brandThyristors
0.8 Amp Sensitive SCRs
Dimensions –TO-92 (E Package)
TC Measuring Point
Inches
Min
Millimeters
Dimension
Max
0.196
-
Min
Max
4.98
-
A
A
B
D
E
0.176
0.500
0.095
0.150
0.046
0.135
0.088
0.176
0.088
0.013
0.013
4.47
12.70
2.41
3.81
1.16
0.105
-
2.67
-
F
0.054
0.145
0.096
0.186
0.096
0.019
0.017
1.37
3.68
2.44
4.73
2.44
0.48
0.43
B
G
H
J
3.43
2.23
4.47
2.23
0.33
0.33
K
Cathode
Anode
L
Gate
E
M
All leads insulated from case. Case is electrically nonconductive.
G
H
M
F
L
D
K
J
Dimensions — Compak (C Package)
T
/ T Temperature
L
C
Inches
Millimeters
Min
Measurement Point
Dimension
Gate
P
Min
Max
0.156
0.220
0.087
0.181
0.063
0.096
0.008
0.104
0.053
0.016
0.055
0.028
0.033
0.058
Max
3.95
5.60
2.20
4.60
1.60
2.45
0.20
2.65
1.35
0.41
1.40
0.71
0.84
1.47
B
D
M
N
A
B
C
D
E
0.130
0.201
0.077
0.159
0.030
0.075
0.002
0.077
0.043
0.006
0.030
0.022
0.027
0.052
3.30
5.10
1.95
4.05
0.75
1.90
0.05
1.95
1.09
0.15
0.76
0.56
0.69
1.32
A
C
Cathode
Anode
F
H
F
L
G
H
J
E
J
K
G
0.079
(2.0)
0.079
(2.0)
0.079
(2.0)
0.040
(1.0)
K
0.110
(2.8)
0.030
(0.76)
L
M
N
P
Dimensions are in inches
(and millimeters).
Pad Outline
EC103xx & SxSx Series
©2011 Littelfuse, Inc
169
Revised: June 21, 2011 04:14 PM
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brandThyristors
0.8 Amp Sensitive SCRs
Product Selector
Voltage
Part Number
Gate Sensitivity
Type
Package
400V
600V
800V
1000V
EC103 x 1
EC103 x 2
EC103 x
EC103 x 3
S x S1
X
X
X
X
X
X
X
X
X
12μA
50μA
Sensitive SCR
Sensitive SCR
Sensitive SCR
Sensitive SCR
Sensitive SCR
Sensitive SCR
Sensitive SCR
Sensitive SCR
TO-92
TO-92
X
X / 2N6565
200μA
500μA
12μA
TO-92
X
X
X
X
X
TO-92
Compak
Compak
Compak
Compak
S x S2
50μA
S x S
200μA
500μA
S x S3
Note: x = Voltage
Packing Options
Part Number
EC103xy / 2N6565
EC103xyRP
Marking
Weight
0.19 g
0.19 g
0.19 g
0.08 g
Packing Mode
Base Quantity
EC103xy / 2N6565
EC103xy
Bulk
2000
2000
2000
2500
Reel Pack
EC103xyAP
EC103xy
Ammo Pack
Embossed Carrier
SxSyRP
SxSy
Note: x = Voltage, y = sensitivity
TO-92 (3-lead) Reel Pack (RP) Radial Leaded Specifications
Meets all EIA-468-C Standards
0.02 (0.5)
0.236
(6.0)
0.098 (2.5) MAX
1.26
1.6
(32.0)
(41.0)
0.708
(18.0)
0.354
(9.0)
0.5
Cathode
Anode
0.1 (2.54)
14.17(360.0)
(12.7)
0.2 (5.08) Gate
0.157
DIA
(4.0)
Flat up
1.97
(50.0)
Dimensions
are in inches
(and millimeters).
Direction of Feed
EC103xx & SxSx Series
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
170
Revised: June 21, 2011 04:14 PM
Teccor® brandThyristors
0.8 Amp Sensitive SCRs
TO-92 (3-lead) Ammo Pack (AP) Radial Leaded Specifications
Meets all EIA-468-C Standards
0.02 (0.5)
0.236
(6.0)
0.098 (2.5) MAX
1.27
1.62
(32.2)
(41.2)
0.708
(18.0)
0.354
(9.0)
0.157
0.5
0.1 (2.54)
Anode
0.2 (5.08)
Cathode
Gate
DIA
(4.0)
(12.7)
Flat down
25 Devices per fold
1.85
(47.0)
12.2
(310.0)
Dimensions
are in inches
(and millimeters).
1.85
(47.0)
13.3
(338.0)
Compak Embossed Carrier Reel Pack (RP) Specifications
Meets all EIA-481-1 Standards
0.157
(4.0)
Anode
0.47
(12.0)
0.36
(9.2)
8.0
0.315
(8.0)
Gate
Cover tape
0.059
(1.5)
DIA
Cathode
12.99
(330.0)
0.512 (13.0) Arbor
Hole Dia.
Dimensions
are in inches
(and millimeters).
0.49
(12.4)
Direction of Feed
EC103xx & SxSx Series
©2011 Littelfuse, Inc
171
Revised: June 21, 2011 04:14 PM
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brandThyristors
0.8 Amp Sensitive SCRs
Part Numbering System (TO-92)
Part Marking System
EC103 D 1 75
TO-92 (E Package)
EC103D1
DEVICE TYPE
EC: TO-92 SCR
2N: JEDEC
Lead Form Dimension
xx: Lead Form Option
YMLXX
®
CURRENT RATING
103: 0.8A (TO-92)
SENSITIVITY & TYPE
VOLTAGE RATING
1: 12
2: 50
µ
µ
A
A
D: 400V
M: 600V
(JEDEC) 6565: 400V
[blank]: 200
A
µ
3: 500
µ
A
Part Numbering System (Compak)
Part Marking System (Compak)
S
6
S 1
Compak (C Package)
DEVICE TYPE
S: Compak SCR
SENSITIVITY & TYPE
S6S1
1: 12
2: 50
µ
A
µ
A
YMXXX
®
[blank]: 200
A
µ
VOLTAGE RATING
4: 400V
6: 600V
3: 500
µ
A
CURRENT RATING
S: 0.8A (Compak)
EC103xx & SxSx Series
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
172
Revised: June 21, 2011 04:14 PM
Please refer to http://www.littelfuse.com for current information.
相关型号:
EC103D75AP
Silicon Controlled Rectifier, 0.8A I(T)RMS, 400V V(DRM), 400V V(RRM), 1 Element, TO-92, ROHS COMPLIANT, PLASTIC PACKAGE-3
LITTELFUSE
EC103D75RP
Silicon Controlled Rectifier, 0.8A I(T)RMS, 400V V(DRM), 400V V(RRM), 1 Element, TO-92, ROHS COMPLIANT, PLASTIC PACKAGE-3
LITTELFUSE
EC103DAP
Silicon Controlled Rectifier, 0.8A I(T)RMS, 400V V(DRM), 400V V(RRM), 1 Element, TO-92, ROHS COMPLIANT, PLASTIC PACKAGE-3
LITTELFUSE
EC103DRP
Silicon Controlled Rectifier, 0.8A I(T)RMS, 400V V(DRM), 400V V(RRM), 1 Element, TO-92
TECCOR
EC103DRP
Silicon Controlled Rectifier, 0.8A I(T)RMS, 400V V(DRM), 400V V(RRM), 1 Element, TO-92, ROHS COMPLIANT, PLASTIC PACKAGE-3
LITTELFUSE
EC103E
Silicon Controlled Rectifier, 0.8A I(T)RMS, 800mA I(T), 500V V(DRM), 500V V(RRM), 1 Element, TO-92, TO-92, 3 PIN
TECCOR
EC103E2
Silicon Controlled Rectifier, 0.8A I(T)RMS, 800mA I(T), 500V V(DRM), 500V V(RRM), 1 Element, TO-92, TO-92, 3 PIN
LITTELFUSE
EC103E2
Silicon Controlled Rectifier, 0.8A I(T)RMS, 800mA I(T), 500V V(DRM), 500V V(RRM), 1 Element, TO-92, TO-92, 3 PIN
TECCOR
EC103E3
Silicon Controlled Rectifier, 0.8A I(T)RMS, 800mA I(T), 500V V(DRM), 500V V(RRM), 1 Element, TO-92, TO-92, 3 PIN
LITTELFUSE
©2020 ICPDF网 联系我们和版权申明