5KP8.0CAB [LITTELFUSE]
暂无描述;型号: | 5KP8.0CAB |
厂家: | LITTELFUSE |
描述: | 暂无描述 |
文件: | 总6页 (文件大小:890K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TransientVoltage Suppression Diodes
Axial Leaded – 5000W > 5KP series
RoHS
5KP Series
Description
Uni-directional
The 5KP Series is designed specifically to protect sensitive
electronic equipment from voltage transients induced by
lightning and other transient voltage events.
Features
Bi-directional
• VBR @TJ= VBR@25°C × (1+αT • ESD protection of data
lines in accordance with
IEC 61000-4-2 (IEC801-2)
x (TJ - 25))
(αT:Temperature Coefficient)
• EFT protection of data
lines in accordance with
IEC 61000-4-4 (IEC801-4)
• Low incremental surge
resistance
• Glass passivated chip
junction in P600 package
Agency Approvals
• 5000W peak pulse
capability at 10/1000μs
waveform, repetition rate
(duty cycles):0.01%
• Fast response time:
typically less than 1.0ps
from 0 Volts to BV min
AGENCY
AGENCY FILE NUMBER
E128662/E230531
• Typical IR less than 2μA
above 12V
• High temperature
soldering guaranteed:
260°C/40 seconds /
0.375”, (9.5mm) lead
length, 5 lbs., (2.3kg)
tension
• Plastic package has
underwriters laboratory
flammability classification
94V-O
Maximum Ratings andThermal Characteristics
(TA=25°C unless otherwise noted)
• Excellent clamping
capability
•Typical failure mode is
short from over-specified
voltage or current
• Whisker test is conducted
based on JEDEC
JESD201A per its table 4a
and 4c
• IEC-61000-4-2 ESD
Parameter
Symbol
PPPM
Value
5000
Unit
W
Peak Pulse Power Dissipation by
10/1000μsTest Waveform (Fig.2)
(Note 1)
Steady State Power Dissipation on
Inifinite Heat Sink atTL=75ºC (Fig. 6)
PD
8.0
W
A
• Matte tin lead–free plated
• Halogen free and RoHS
compliant
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave Unidirectional
Only (Note 2)
Maximum Instantaneous Forward
Voltage at 100A for Unidirectional
Only (Note 3)
IFSM
400
15kV(Air), 8kV (Contact)
VF
3.5/5.0
V
Applications
Operating Junction and Storage
Temperature Range
TJ, TSTG -55 to 150
°C
TVS devices are ideal for the protection of I/O interfaces,
CC bus and other vulnerable circuits used in telecom,
computer, industrial and consumer electronic applications.
V
TypicalThermal Resistance Junction
to Lead
RuJL
RuJA
8.0
40
°C/W
°C/W
TypicalThermal Resistance Junction
to Ambient
Notes:
1. Non-repetitive current pulse , per Fig. 4 and derated aboveTA = 25°C per Fig. 3.
2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per
minute maximum.
3. VF<3.5V for devices of VBR<_ 200V and VF<5.0V for devices of VBR>_ 201V.
Additional Information
Functional Diagram
Datasheet
Resources
Samples
Bi-directional
Cathode
Anode
Uni-directional
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 01/24/14
TransientVoltage Suppression Diodes
Axial Leaded – 5000W > 5KP series
Electrical Characteristics (TA=25°C unless otherwise noted)
Maximum
Reverse
Leakage
IR @ VR
Maximum Maximum
Breakdown
Reverse
Test
Current
IT
Agency
Approval
Part
Number
(Uni)
Part
Number
(Bi)
Clamping
Voltage
VC @ IPP
(V)
Peak
Pulse
Current IPP
(A)
Voltage VBR
(Volts) @ IT
Stand off
Voltage VR
(Volts)
(mA)
MIN
MAX
(µ A)
5KP5.0A
5KP6.0A
5KP6.5A
5KP7.0A
5KP7.5A
5KP8.0A
5KP8.5A
5KP9.0A
5KP10A
5KP11A
5KP12A
5KP13A
5KP14A
5KP15A
5KP16A
5KP17A
5KP18A
5KP20A
5KP22A
5KP24A
5KP26A
5KP28A
5KP30A
5KP33A
5KP36A
5KP40A
5KP43A
5KP45A
5KP48A
5KP51A
5KP54A
5KP58A
5KP60A
5KP64A
5KP70A
5KP75A
5KP78A
5KP85A
5KP90A
5KP100A
5KP110A
5KP120A
5KP130A
5KP150A
5KP160A
5KP170A
5KP180A
5KP190A
5KP200A
5KP210A
5KP220A
5KP250A
5KP5.0CA
5KP6.0CA
5KP6.5CA
5KP7.0CA
5KP7.5CA
5KP8.0CA
5KP8.5CA
5KP9.0CA
5KP10CA
5KP11CA
5KP12CA
5KP13CA
5KP14CA
5KP15CA
5KP16CA
5KP17CA
5KP18CA
5KP20CA
5KP22CA
5KP24CA
5KP26CA
5KP28CA
5KP30CA
5KP33CA
5KP36CA
5KP40CA
5KP43CA
5KP45CA
5KP48CA
5KP51CA
5KP54CA
5KP58CA
5KP60CA
5KP64CA
5KP70CA
5KP75CA
5KP78CA
5KP85CA
5KP90CA
5KP100CA
5KP110CA
5KP120CA
5KP130CA
5KP150CA
5KP160CA
5KP170CA
5KP180CA
5KP190CA
5KP200CA
5KP210CA
5KP220CA
5KP250CA
5.0
6.0
6.5
7. 0
7. 5
8.0
8.5
9.0
10.0
11.0
12.0
13.0
14.0
15.0
16.0
17. 0
18.0
20.0
22.0
24.0
26.0
28.0
30.0
33.0
36.0
40.0
43.0
45.0
48.0
51.0
54.0
58.0
60.0
64.0
70.0
75.0
78.0
85.0
90.0
100.0
110.0
120.0
130.0
150.0
160.0
170.0
180.0
190.0
200.0
210.0
220.0
250.0
6.40
6.67
7.22
7.78
8.33
8.89
9.44
10.00
11.10
7. 0 0
7.37
7.98
8.60
9.21
9.83
10.40
11.10
12.30
13.50
14.70
15.90
17.20
50
50
50
50
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
9.2
10.3
11.2
12.0
12.9
13.6
14.4
15.4
17. 0
18.2
19.9
21.5
23.2
24.4
26.0
27.6
29.2
32.4
35.5
38.9
42.1
45.4
48.4
53.3
58.1
64.5
69.4
72.7
77.4
554.3
495.1
455.4
425.0
395.3
375.0
354.2
331.2
300.0
280.2
256.3
237.2
219.8
209.0
196.2
184.8
174.7
157.4
143.7
131.1
121.1
112.3
105.4
95.7
87.8
79.1
73.5
70.2
65.9
61.9
58.6
54.5
52.7
49.5
45.1
42.1
40.5
37.2
5000
5000
2000
1000
250
150
50
20
15
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
12.20
13.30
14.40
15.60
16.70
17.80
18.90
20.00
22.20
24.00
26.70
28.90
31.10
33.30
36.70
40.00
44.40
47.80
50.00
53.30
56.70
60.00
64.40
66.70
71.10
18.50
19.70
20.90
22.10
24.50
26.90
29.50
31.90
34.40
36.80
40.60
44.20
49.10
52.80
55.30
58.90
62.70
66.30
71.20
73.70
78.60
86.00
92.10
95.80
104.00
111.00
123.00
135.00
147.00
159.00
185.00
197.00
209.00
221.00
233.00
246.00
258.00
270.00
306.00
82.4
87.1
93.6
96.8
103.0
113.0
121.0
126.0
137.0
146.0
162.0
177.0
193.0
209.0
243.0
259.0
275.0
292.0
310.0
329.2
349.5
371.1
425.0
77.80
83.30
86.70
94.40
100.00
110.00
122.00
133.00
144.00
167.00
178.00
189.00
200.00
211.00
222.00
233.00
244.00
277.00
34.9
31.5
28.8
26.4
24.4
21.0
19.7
18.5
17. 5
16.5
15.5
14.6
13.7
12.0
2
2
For bidirectional type having VR of 10 volts and less, the IR limit is double.
For parts without A , the VBR is + 10% and VC is 5% higher than with A parts
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 01/24/14
TransientVoltage Suppression Diodes
Axial Leaded – 5000W > 5KP series
I-V Curve Characteristics
Bi-directional
Uni-directional
Ipp
IT
IR
Vc VBR
VR
V
Vc VBR
VR
IR
IT
V
VRVBR Vc
IR
IT
VF
Ipp
Ipp
PPPM Peak Pulse Power Dissipation -- Max power dissipation
VR Stand-off Voltage -- Maximum voltage that can be applied to theTVS without operation
VBR Breakdown Voltage -- Maximum voltage that flows though theTVS at a specified test current (IT)
VC Clamping Voltage -- Peak voltage measured across the suppressor at a specified Ippm (peak impulse current)
IR Reverse Leakage Current -- Current measured at VR
VF Forward Voltage Drop for Uni-directional
Ratings and Characteristic Curves (TA=25°C unless otherwise noted)
Figure 1 -TVSTransients ClampingWaveform
Figure 2 - Peak Pulse Power Rating Curve
Voltage Transients
100
Non-repetitive pulse
waveform shown in
Fig.3 TA=25ºC
Voltage Across TVS
10
1
Current Through TVS
0.1
0.1µs
1.0µs
10µs
100µs
1.0ms 10ms
td - Pulse Width (sec.)
Time
continues on next page.
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 01/24/14
TransientVoltage Suppression Diodes
Axial Leaded – 5000W > 5KP series
Ratings and Characteristic Curves (TA=25°C unless otherwise noted) (Continued)
Figure 3 - Pulse Derating Curve
Figure 4 - PulseWaveform
150
100
80
60
40
20
0
t =10µsec
r
T
=25°C
J
Pulse Width(td) is defined
as the point where the peak
current decays to 50% of I
PPM
Peak Value
I
100
PPM
Half Value
I
PPM
2
I
PPM
( )
50
0
10/1000µsec. Waveform
as defined by R.E.A
t
d
0
25
50
75
100 125 150
175
1.0
2.0
t-Time (ms)
3.0
4.0
TA-Ambient temperature (ºC)
0
Figure 5 -Typical Junction Capacitance
Figure 6 - Steady State Power Derating Curve
100000
9
8
7
6
5
4
Bi-directional V=0V
10000
Uni-directional V=0V
Uni-directional @ VR
1000
100
10
Bi-directional @ VR
3
L = 0.375” (9.5mm)
Lead Lengths
2
Tj=25C
f=1.0MHz
Vsig=50mVp-p
1
0
1
1.0
10.0
100.0
1000.0
0
25
50
75
100 125 150 175 200
VBR - Reverse Breakdown Voltage (V)
TL - Lead Temperature(ºC)
Figure 7 - Maximum Non-Repetitive Peak Forward
Surge Current
450
400
350
300
250
200
150
100
50
0
1
10
100
Number of Cycles at 60 Hz
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 01/24/14
TransientVoltage Suppression Diodes
Axial Leaded – 5000W > 5KP series
Soldering Parameters
tp
Reflow Condition
Lead–free assembly
TP
Ramp-up
Critical Zone
to T
-Temperature Min (Ts(min)
)
150°C
T
L
P
TL
tL
Pre Heat -Temperature Max (Ts(max)
)
200°C
Ts(max)
-Time (min to max) (ts)
60 – 180 secs
Ramp-down
Ts(min)
Average ramp up rate (LiquidusTemp
(TL) to peak
3°C/second max
ts
Preheat
TS(max) toTL - Ramp-up Rate
3°C/second max
25˚C
t 25˚C to Peak
-Temperature (TL) (Liquidus) 217°C
Reflow
Time (t)
-Time (min to max) (ts)
60 – 150 seconds
PeakTemperature (TP)
260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)
Flow/Wave Soldering (Solder Dipping)
20 – 40 seconds
PeakTemperature :
DippingTime :
Soldering :
265OC
Ramp-down Rate
6°C/second max
8 minutes Max.
280°C
10 seconds
1 time
Time 25°C to peakTemperature (TP)
Do not exceed
Environmental Specifications
Physical Specifications
Weight
Case
0.07oz., 2.1g
HighTemp. Storage
HTRB
JESD22-A103
P600 molded plastic body over
passivated junction.
JESD22-A108
JESD22-A104
JESD22-A101
JESD22-B106
Color band denotes the cathode except
Bipolar.
Temperature Cycling
H3TRB
Polarity
MatteTin axial leads, solderable per
JESD22-B102.
Terminal
RSH
Dimensions
Inches
Millimeters
Min Max
Dimensions
Cathode Band
Min
Max
(for Uni-directional products only)
D
A
B
C
D
1.000
0.340
0.048
0.340
-
25.40
8.60
1.22
-
C
0.360
0.052
0.360
9.10
1.32
9.10
A
A
B
8.60
P600
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 01/24/14
TransientVoltage Suppression Diodes
Axial Leaded – 5000W > 5KP series
Part Numbering System
Part Marking System
5KPxxxXXX
Cathode Band
(for uni-directional
products only)
OPTION CODE:
BLANK ReelTape
-B Bulk Packaging
YYWW
Littelfuse Logo
Trace Code Marking
YY:Year Code
TYPE CODE:
A
Uni-Directional (5% VBR VoltageTolerance)
WW: Week Code
CA Bi-Directional (5%
V
BR VoltageTolerance)
5KPXXX
Product Type
VR VOLTAGE
SERIES CODE
Packing Options
Part Number
Component Package
Quantity
Packaging Option
Packaging Specification
EIA STD RS-296
5KPxxxXX
P600
800
Tape & Reel
BULK
5KPxxxXX-B
P600
100
Littelfuse Spec.
Tape and Reel Specification
Off Center
either side
0.028(0.7)
2.56
(65.0)
2.063+0.079/-0.039
(53.0+2.0/-1.0)
0.236
(6.0)
0.047
(1.2)
0.394+/-0.020
(10.0+/-0.5)
Dimensions are in
inches/mm
13.0
(330.2)
3.0
(76.2)
0.68
(17. 27)
2.75
(69.85)
Direction of Feed
Recess Depth Max. 0.75 (19.05)
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 01/24/14
相关型号:
5KP8.0CACOX.160
Trans Voltage Suppressor Diode, 5000W, 8V V(RWM), Bidirectional, 1 Element, Silicon,
MICROSEMI
5KP8.0CACOX.200
Trans Voltage Suppressor Diode, 5000W, 8V V(RWM), Bidirectional, 1 Element, Silicon,
MICROSEMI
5KP8.0CACOX.250
Trans Voltage Suppressor Diode, 5000W, 8V V(RWM), Bidirectional, 1 Element, Silicon,
MICROSEMI
5KP8.0CAE3
Trans Voltage Suppressor Diode, 5000W, 8V V(RWM), Bidirectional, 1 Element, Silicon, DO-204AR, PLASTIC, CASE 5A, 2 PIN
MICROSEMI
5KP8.0CAE3TR
5000W, BIDIRECTIONAL, SILICON, TVS DIODE, DO-204AR, ROHS COMPLIANT, PLASTIC, CASE 5A, 2 PIN
MICROSEMI
5KP8.0CCOX.160
Trans Voltage Suppressor Diode, 5000W, 8V V(RWM), Bidirectional, 1 Element, Silicon,
MICROSEMI
5KP8.0COX.250
Trans Voltage Suppressor Diode, 5000W, 8V V(RWM), Unidirectional, 1 Element, Silicon,
MICROSEMI
©2020 ICPDF网 联系我们和版权申明