229.800P [LITTELFUSE]
Axial Lead and Cartridge Fuses - Subminiature Glass Body; 轴向引线和墨盒保险丝 - 微型玻璃管型号: | 229.800P |
厂家: | LITTELFUSE |
描述: | Axial Lead and Cartridge Fuses - Subminiature Glass Body |
文件: | 总2页 (文件大小:117K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Axial Lead and Cartridge Fuses
Subminiature Glass Body
U
®
®L
2AG Slo-Blo® Fuse 229P/230P Series
®
RoHS
Pb
The 2AG Slo-Blo® fuses are available in cartridge form or with axial
leads. Axial leaded fuses are board washable. 2AG fuses provide the
same performance characteristics as their 3AG counterpart, while
occupying one-third the space. Sleeved fuses are available.
ELECTRICAL CHARACTERISTICS:
% of Ampere
Rating
Opening
Time
100%
135%
4 hours, Minimum
1 hour, Maximum
3 seconds, Minimum
20 seconds, Maximum
200%
AGENCY APPROVALS: Listed by Underwriters Laboratories and
Certified by CSA through 3.5 amperes. Recognized under the
Components Program of Underwriters Laboratories from 4 through 7
amperes. 1 through 7 amperes approved by METI.
AGENCY FILE NUMBERS: UL E10480, CSA LR 29862.
INTERRUPTING RATINGS:
229 000P Series
230 000P Series
0.25–3.5A
4–7A
0.25–1A
1.25–3.5A
10,000 amperes at 125VAC
400 amperes at 125VAC
35 amperes at 250VAC
100 amperes at 250VAC
4.7 (.184")
0.635
(.025")
4.5
(.177")
14.48
(.57")
14.48
(.57")
PACKAGING OPTIONS: 230P Series available on Tape and Reel per
EIA-296. For 1500 pieces per reel, add packaging suffix DRTIP. See
page 8 for pitch dimensions. 229P and 230P series available in bulk
packaging. For 1000 pieces bulk, add packaging suffix MXP.
38.1
(1.50") TYP.
Axial Lead Material: Tin coated copper.
PHYSCIALSPECIFICATIONS:
Materials: Glass Body, Nickel-Plated Brass Fuse Caps(Insulating
sleeve option availabel).
SOLDERING PARAMETERS:
Wave solder- 500˚F(260˚C), 3 seconds Max.
Reflow solder- Not recommended
Average Time Current Curves
1000
11
100
10
ORDERING INFORMATION:
Cartridge
Catalog
Number
Axial Lead
Catalog
Number
Nominal
Resistance
Cold Ohms
Nominal
Melting I2t
A2 Sec.
Ampere Voltage
Rating
Rating
229.250P
229.350P
229.375P
229.500P
229.600P
229.750P
229.800P
229 001P
229 1.25P
229 01.5P
229 002P
229 2.25P
229 02.5P
229 003P
229 03.5P
229 004P
229 005P
229 006P
229 007P
230.250P
230.350P
230.375P
230.500P
230.600P
230.750P
230.800P
230 001P
230 1.25P
230 01.5P
230 002P
230 2.25P
230 02.5P
230 003P
230 03.5P
230 004P
230 005P
230 006P
230 007P
1/4
.350
3/8
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
125
125
125
125
2.41
1.30
0.216
0.490
0.580
1.16
1/2
0.688
0.477
0.340
0.304
1
6/10
3/4
8/10
1.75
2.95
3.45
1
5.64
1
4
1 /
0.145
0.107
9.80
1
2
1 /
15.0
0.1
2
0.0692
0.0562
0.0498
0.0380
0.0310
0.0256
0.0185
0.0140
0.0115
30.0
1
4
2 /
39.0
1
2
2 /
50.0
3
77.0
1
2
3 /
110.0
148.0
267.0
380.0
464.0
4
5
6
7
0.01
0.1
1
10
100
1000
CURRENT IN AMPERES
399
www. lit t elf us e. c om
Axial Lead and Cartridge Fuses
Subminiature Glass Body
RoHS
2AG Slo-Blo® Fuse 229P/230P Series
Pb
®
SURGE WITHSTAND SPECIFICATIONS
INDICATING SLO-BLO FUSE
Our standard 229P and 230P Series Slo-Blo® fuses meet the demanding
requirements of the Telecom industry. These Fuses combine
conventional overcurrent protection with the ability to withstand high cur-
rent, short duration pulses. These fuses comply with the short circuit
requirements of UL 1459 for telephone equipment. Insulating Sleeve
Option available. We have characterized these fuses for the Telecom
industry requirements as shown below.
The 2AG Indicating Slo-Blo® fuse instantly identifies itself upon
opening by showing a discoloration of its glass body. Guesswork
and time consuming circuit testing are eliminated. This unique
design offers the same quality performance characteristics as
the standard 2AG fuse design.
ELECTRICAL CHARACTERISTICS:
Short Circuit Capabilities:
UL 60950 (UL 1459 Included):
60A,
40A,
7A,
600VAC
600VAC
600VAC
600VAC
2.2A,
• Meets UL 497 Specifications
PEAK WITHSTAND CURRENT (lp): These fuses will withstand 50
repetitions of a double exponential impulse wave having peak currents
(lp) and peak voltages as listed.
Cartridge
Catalog
Number
Axial Lead
Catalog
Number
10 x 160
Ampere microsec. microsec.
10 x 560
10 x 1000
microsec.
1000V
Rating
1500V
800V
* When ordering the 2AG Indicating Slo-Blo Fuse, an ‘S’ is
required after the catalog number.
229.250P
229.350P
229.375P
229.500P
229.600P
229.750P
229.800P
229 001P
229 1.25P
230.250P
230.350P
230.375P
230.500P
230.600P
230.750P
230.800P
230 001P
230 1.25P
1/4
.350
3/8
1/2
6/10
3/4
8/10
1
23.0A
34.0A
40.0A
60.0A
71.0A
91.0A
104.0A
130.0A
162.0A
16.6A
25.8A
25.4A
37.7A
47.2A
65.5A
68.9A
88.6A
118.1A
12.4A
19.3A
19.0A
28.2A
35.3A
49.0A
51.6A
66.3A
100.0A
Example:
-1A Indicating Slo-Blo® Fuse = 230 001S
1
1
4
1 /
1 500A peak, 2500V, 2 x 10 microseconds, 20 repetitions.
2AG 229P/230P Series General Specifications
ENVIRONMENTAL SPECIFICATIONS:
Operating Temperature: –55°C to 125°C.
Shock: MIL-STD-202, Method 213, Test Condition I
(100 G’s peak for 6 milliseconds).
PHYSICAL SPECIFICATIONS:
Materials: Glass Body, Nickel-Plated Brass Fuse Caps.
(Insulating sleeve option available).
Vibration: MIL-STD-202, Method 201 (10–55 Hz, 0.06 inches
total excursion).
Salt Spray: MIL-STD-202 Method 101, Test Condition B (48 hours).
Insulation Resistance (After Opening): MIL-STD-202, Method 302,
Test Condition B.
SOLDERING PARAMETERS:
Wave solder — 500°F (260°C), 3 seconds Max.
Reflow solder — Not recommended.
Resistance to Soldering Heat: (Axial Leaded Fuses):
MIL-STD-202, Method 210A, Test Condition B (260°C, 3 Seconds).
Thermal Shock: MIL-STD-202, Method 107,
Test Condition B (–65°C to 125°C).
Moisture Resistance: MIL-STD-202, Method 106
(90-98% RH, 65°C).
Solderability: (Axial Leaded Fuses): MIL-STD-202,
Method 208.
400
www. lit t elf us e. c om
相关型号:
229.800PMXP
Electric Fuse, Slow Blow, 0.8A, 250VAC, 35A (IR), Inline/holder, ROHS COMPLIANT
LITTELFUSE
©2020 ICPDF网 联系我们和版权申明