1.5KE200C-B [LITTELFUSE]
1500W, BIDIRECTIONAL, SILICON, TVS DIODE, DO-201, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC PACKAGE-2;型号: | 1.5KE200C-B |
厂家: | LITTELFUSE |
描述: | 1500W, BIDIRECTIONAL, SILICON, TVS DIODE, DO-201, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC PACKAGE-2 电视 |
文件: | 总6页 (文件大小:1052K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TransientVoltage Suppression Diodes
Axial Leaded – 1500W > 1.5KE series
Pb e3
RoHS
1.5KE Series
Description
The 1.5KE Series is designed specifically to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
Uni-directional
Features
Bi-directional
• 1500W peak pulse
capability at 10/1000μs
waveform, repetition rate
(duty cycles):0.01%
• Low incremental surge
resistance
• Typical IR less than 1μA
when VBR min>12V
Agency Approvals
• Glass passivated chip
junction in DO-201
Package
• Fast response time:
typically less than 1.0ps
from 0 Volts to BV min
• Excellent clamping
capability
•Typical failure mode is
short from over-specified
voltage or current
• Whisker test is conducted
based on JEDEC
JESD201A per its table 4a
and 4c
• IEC-61000-4-2 ESD
30kV(Air), 30kV (Contact)
• High temperature
to reflow soldering
guaranteed: 260°C/40sec
/ 0.375”,(9.5mm) lead
length, 5 lbs., (2.3kg)
tension
• VBR @TJ= VBR@25°C
x (1+αT x (TJ - 25))
(αT:Temperature
Coefficient, typical value
is 0.1%)
• Plastic package is
flammability rated V-0 per
Underwriters Laboratories
• Matte tin lead–free plated
• Halogen free and RoHS
compliant
AGENCY
AGENCY FILE NUMBER
E230531
Maximum Ratings andThermal Characteristics
(TA=25OC unless otherwise noted)
Parameter
Symbol
PPPM
Value
1500
Unit
W
Peak Pulse Power Dissipation by
10/1000μsTest Waveform (Fig.2)
(Note 1), (Note 4)
Steady State Power Dissipation on
Infinite Heat Sink atTL=75ºC
PD
6.5
W
A
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave Unidirectional
Only (Note 2)
Maximum Instantaneous Forward
Voltage at 100A for Unidirectional
Only (Note 3)
IFSM
200
VF
3.5/5.0
V
• ESD protection of data
lines in accordance with
IEC 61000-4-2
• EFT protection of data
lines in accordance with
IEC 61000-4-4
• Pb-free E3 means 2nd
level interconnect is
Pb-free and the terminal
finish material is tin(Sn)
(IPC/JEDEC J-STD-
609A.01)
Operating Junction and Storage
Temperature Range
TJ, TSTG -55 to 175
°C
TypicalThermal Resistance
Junction to Lead
RθJL
RθJA
15
75
°C/W
°C/W
TypicalThermal Resistance
Junction to Ambient
Notes:
1. Non-repetitive current pulse , per Fig. 4 and derated aboveTJ (initial) =25OC per Fig. 3.
Applications
2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per
minute maximum.
TVS devices are ideal for the protection of I/O interfaces,
CC bus and other vulnerable circuits used in telecom,
V
3. VF < 3.5V for single die parts and VF< 5.0V for stacked-die parts.
computer, industrial and consumer electronic applications.
4. The PPPM of stacked-die parts is 2kW and please contact littelfuse for the detail
stacked-die parts.
Functional Diagram
Additional Infomarion
Datasheet
Samples
Resources
Bi-directional
Cathode
Anode
Uni-directional
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/20/15
TransientVoltage Suppression Diodes
Axial Leaded – 1500W > 1.5KE series
Electrical Characteristics (TA=25°C unless otherwise noted)
Maximum
Clamping
Voltage
Reverse
Stand off
Voltage VR
(Volts)
Maximum
Peak Pulse
Current Ipp
(A)
Maximum
Reverse
Leakage IR @
VR (µA)
Agency
Approval
Breakdown Voltage VBR
(Volts) @ IT
Part
Number
(Uni)
Part
Number
(Bi)
Test
Current
IT (mA)
V @ Ipp
MIN
MAX
(CVolts)
1.5KE6.8A
1.5KE7.5A
1.5KE8.2A
1.5KE9.1A
1.5KE10A
1.5KE11A
1.5KE12A
1.5KE13A
1.5KE15A
1.5KE16A
1.5KE18A
1.5KE20A
1.5KE22A
1.5KE24A
1.5KE27A
1.5KE30A
1.5KE33A
1.5KE36A
1.5KE39A
1.5KE43A
1.5KE47A
1.5KE51A
1.5KE56A
1.5KE62A
1.5KE68A
1.5KE75A
1.5KE82A
1.5KE91A
1.5KE100A
1.5KE110A
1.5KE120A
1.5KE130A
1.5KE150A
1.5KE160A
1.5KE170A
1.5KE180A
1.5KE200A
1.5KE220A
1.5KE250A
1.5KE300A
1.5KE320A
1.5KE350A
1.5KE400A
1.5KE440A
1.5KE480A
1.5KE510A
1.5KE530A
1.5KE540A
1.5KE550A
1.5KE6.8CA
1.5KE7.5CA
1.5KE8.2CA
1.5KE9.1CA
1.5KE10CA
1.5KE11CA
1.5KE12CA
1.5KE13CA
1.5KE15CA
1.5KE16CA
1.5KE18CA
1.5KE20CA
1.5KE22CA
1.5KE24CA
1.5KE27CA
1.5KE30CA
1.5KE33CA
1.5KE36CA
1.5KE39CA
1.5KE43CA
1.5KE47CA
1.5KE51CA
1.5KE56CA
1.5KE62CA
1.5KE68CA
1.5KE75CA
1.5KE82CA
1.5KE91CA
1.5KE100CA
1.5KE110CA
1.5KE120CA
1.5KE130CA
1.5KE150CA
1.5KE160CA
1.5KE170CA
1.5KE180CA
1.5KE200CA
1.5KE220CA
1.5KE250CA
1.5KE300CA
1.5KE320CA
1.5KE350CA
1.5KE400CA
1.5KE440CA
1.5KE480CA
1.5KE510CA
1.5KE530CA
1.5KE540CA
1.5KE550CA
5.80
6.40
7.02
7.78
8.55
9.40
10.20
11.10
12.80
13.60
15.30
17. 10
6.45
7. 13
7.79
8.65
9.50
10.50
11.40
12.40
14.30
15.20
17. 10
19.00
20.90
22.80
25.70
28.50
31.40
7. 14
7.88
8.61
9.50
10.50
11.60
10
10
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
10.5
11.3
12.1
13.4
14.5
15.6
16.7
18.2
21.2
22.5
25.2
27.7
30.6
33.2
37.5
41.4
45.7
49.9
53.9
59.3
64.8
70.1
77.0
85.0
92.0
103.0
113.0
125.0
137.0
152.0
165.0
179.0
207.0
219.0
234.0
246.0
274.0
328.0
344.0
414.0
441.0
482.0
548.0
602.0
658.0
698.0
725.0
740.0
760.0
144.8
134.5
125.6
113.4
104.8
97.4
91.0
83.5
71.7
67.6
60.3
54.9
49.7
45.8
40.5
36.7
33.3
30.5
28.2
25.6
23.5
21.7
19.7
17. 9
16.5
14.8
13.5
12.2
11.1
10.0
9.2
8.5
7. 3
6.9
6.5
6.2
5.5
4.6
4.4
3.7
3.5
3.2
2.8
2.5
2.3
2.1
2.1
1000
500
200
50
10
5
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
12.60
13.70
15.80
16.80
18.90
21.00
23.10
25.20
28.40
31.50
34.70
37.80
41.00
45.20
49.40
53.60
58.80
65.10
71.40
78.80
86.10
95.50
105.00
116.00
126.00
137.00
158.00
168.00
179.00
189.00
210.00
231.00
263.00
315.00
336.00
368.00
420.00
462.00
504.00
535.00
556.50
567.00
577.50
18.80
20.50
23.10
25.60
28.20
30.80
33.30
36.80
40.20
43.60
47.80
53.00
58.10
64.10
70.10
77.80
85.50
94.00
102.00
111.00
128.00
136.00
145.00
154.00
171.00
185.00
214.00
256.00
273.00
300.00
342.00
376.00
408.00
434.00
451.00
460.00
468.00
34.20
37.10
40.90
44.70
48.50
53.20
58.90
64.60
71.30
77.90
86.50
95.00
105.00
114.00
124.00
143.00
152.00
162.00
171.00
190.00
209.00
237.00
285.00
304.00
332.00
380.00
418.00
456.00
485.00
503.50
513.00
522.50
2.0
2.0
1.5KE600A
1.5KE600CA
512.00
570.00
630.00
1
828.0
1.8
1
F
For bidirectional type having VR of 10 volts and less, the IR limit is double.
For parts without A, the VBR is 10% and VC is 5% higher than with A parts.
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/20/15
TransientVoltage Suppression Diodes
Axial Leaded – 1500W > 1.5KE series
I-V Curve Characteristics
Bi-directional
Uni-directional
Ipp
IT
IR
Vc VBR
VR
V
Vc VBR
VR
IR
IT
V
VRVBR Vc
IR
IT
VF
Ipp
Ipp
PPPM Peak Pulse Power Dissipation -- Max power dissipation
VR Stand-off Voltage -- Maximum voltage that can be applied to theTVS without operation
VBR Breakdown Voltage -- Maximum voltage that flows though theTVS at a specified test current (IT)
VC Clamping Voltage -- Peak voltage measured across theTVS at a specified Ippm (peak impulse current)
IR Reverse Leakage Current -- Current measured at VR
VF Forward Voltage Drop for Uni-directional
Ratings and Characteristic Curves (TA=25°C unless otherwise noted)
Figure 1 -TVSTransients ClampingWaveform
Figure 2 - Peak Pulse Power Rating
100
Voltage Transients
T
initial =T
J
amb
stacked-die, 2kW
at 10x1000µs, 25°C
Voltage Across TVS
10
1
Current Through TVS
Single die, 1.5kW
at 10x1000µs, 25°C
0.1
0.001
0.01
0.1
1
10
td-Pulse Width (ms)
Time
continues on next page.
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/20/15
TransientVoltage Suppression Diodes
Axial Leaded – 1500W > 1.5KE series
Ratings and Characteristic Curves (TA=25°C unless otherwise noted) (Continued)
Figure 3 - Peak Pulse Power Derating Curve
Figure 4 - PulseWaveform
150
100
75
50
25
0
t =10µsec
r
T
=25°C
J
Pulse Width(td) is defined
as the point where the peak
current decays to 50% of I
PPM
Peak Value
I
100
PPM
Half Value
I
PPM
I
PPM
( )
2
50
0
10/1000µsec. Waveform
as defined by R.E.A
t
d
0
25
50
75
100
125
150
175
200
1.0
2.0
t-Time (ms)
3.0
4.0
0
TJ - Initial Junction Temperature (ºC)
Figure 5 -Typical Junction Capacitance
Figure 6 -TypicalTransientThermal Impedance
100
100000
Uni-directional V=0V
10000
Bi-directional V=0V
10
1
1000
100
10
Uni-directional V=VR
Bi-directional V=VR
1
0.1
1
10
100
1000
0.01
0.1
1
10
100
1000
V
BR - Reverse Breakdown Voltage(V)
T
- Pulse Duration (s)
P
Figure 7 - Maximum Non-Repetitive Peak Forward
Surge Current Uni-Directional Only
Figure 8 - Peak ForwardVoltage Drop vs Peak Forward
Current (TypicalValues)
100.0
200
180
160
140
120
100
80
Single die
Stacked-die
10.0
1.0
0.1
60
40
20
0
1
10
100
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
Number of Cycles at 60 Hz
V -Peak Forward Voltage(V)
F
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/20/15
TransientVoltage Suppression Diodes
Axial Leaded – 1500W > 1.5KE series
Soldering Parameters
Lead–free
Reflow Condition
assembly
tp
TP
-Temperature Min (Ts(min)
)
150°C
Ramp-up
Critical Zone
to T
T
L
P
TL
Pre Heat -Temperature Max (Ts(max)
-Time (min to max) (ts)
)
200°C
tL
Ts(max)
60 – 180 secs
Average ramp up rate (LiquidusTemp (TA)
to peak
Ramp-down
Ts(min)
3°C/second max
ts
Preheat
TS(max) toTA - Ramp-up Rate
3°C/second max
217°C
-Temperature (TA) (Liquidus)
Reflow
25˚C
t 25˚C to Peak
Time (t)
-Time (min to max) (ts)
60 – 150 seconds
260+0/-5 °C
PeakTemperature (TP)
Time within 5°C of actual peak
Temperature (tp)
Flow/Wave Soldering (Solder Dipping)
20 – 40 seconds
PeakTemperature :
DippingTime :
Soldering :
265OC
Ramp-down Rate
6°C/second max
8 minutes Max.
260°C
10 seconds
1 time
Time 25°C to peakTemperature (TP)
Do not exceed
Environmental Specifications
Physical Specifications
Weight
Case
0.045oz., 1.2g
HighTemp. Storage
HTRB
JESD22-A103
JEDEC DO-201 molded plastic body
over passivated junction.
JESD22-A108
JESD22-A104
JESD22-A101
JESD22-B106
Color band denotes the cathode except
Bipolar.
Temperature Cycling
H3TRB
Polarity
MatteTin axial leads, solderable per
JESD22-B102.
Terminal
RSH
Dimensions
Inches
Millimeters
Min Max
Dimensions
Cathode Band
(for Uni-directional products only)
Min
Max
D
A
B
C
D
1.000
0.285
0.038
0.190
-
25.40
7.20
-
C
0.375
0.042
0.210
9.50
1.07
5.30
0.96
4.80
A
A
B
DO-201
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/20/15
TransientVoltage Suppression Diodes
Axial Leaded – 1500W > 1.5KE series
Part Numbering System
xxxXXX
Part Marking System
1.5KE
OPTION CODE:
BLANK ReelTape
-B Bulk Packaging
Cathode Band
(for Uni-directional
YYWW
TYPE CODE:
products only)
Trace Code Marking
A
Uni-Directional (5% VBR VoltageTolerance)
YY:Year Code
CA Bi-Directional (5% VBR VoltageTolerance)
Littelfuse Logo
WW: Week Code
1.5KEXXX
V
BR VOLTAGE CODE
(Refer to the Electrical Characteristics table)
Product Type
SERIES CODE
Packaging
Component
Quantity
Packaging
Option
Part Number
1.5KExxxXX
Packaging Specification
Package
DO-201
DO-201
1200
500
Tape & Reel EIA STD RS-296
1.5KExxxXX-B
BULK
Littelfuse Spec.
Tape and Reel Specification
Off Center
either side
0.028(0.7)
2.56
(65.0)
2.063+0.079/-0.039
(53.0+2.0/-1.0)
0.236
(6.0)
0.047
(1.2)
0.394+/-0.020
(10.0+/-0.5)
Dimensions are in
inches/mm
13.0
(330.2)
3.0
(76.2)
0.68
(17. 27)
2.75
(69.85)
Direction of Feed
Recess Depth Max. 0.75 (19.05)
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/20/15
相关型号:
1.5KE200C-BP
Trans Voltage Suppressor Diode, 1500W, 171V V(RWM), Bidirectional, 1 Element, Silicon, DO-201AE, ROHS COMPLIANT, PLASTIC PACKAGE-2
MCC
1.5KE200C-E3
Trans Voltage Suppressor Diode, 1500W, 162V V(RWM), Bidirectional, 1 Element, Silicon, LEAD FREE, PLASTIC, CASE 1.5KE, 2 PIN
VISHAY
1.5KE200C-G
Trans Voltage Suppressor Diode, 1500W, 162V V(RWM), Bidirectional, 1 Element, Silicon, DO-201AE, LEAD FREE, PLASTIC PACKAGE-2
SENSITRON
1.5KE200C-GT3
Trans Voltage Suppressor Diode, 1500W, 162V V(RWM), Bidirectional, 1 Element, Silicon, DO-201AE, LEAD FREE, PLASTIC PACKAGE-2
SENSITRON
1.5KE200C-HE3/54
Trans Voltage Suppressor Diode, 1500W, 162V V(RWM), Bidirectional, 1 Element, Silicon, ROHS COMPLIANT, PLASTIC PACKAGE-2
VISHAY
1.5KE200C-LF
Trans Voltage Suppressor Diode, 1500W, 162V V(RWM), Bidirectional, 1 Element, Silicon, DO-214AE, ROHS COMPLIANT, PLASTIC PACKAGE-2
WTE
1.5KE200C-T3
Trans Voltage Suppressor Diode, 1500W, 162V V(RWM), Bidirectional, 1 Element, Silicon, DO-214AE, PLASTIC PACKAGE-2
WTE
1.5KE200C-T3
Trans Voltage Suppressor Diode, 1500W, Bidirectional, 1 Element, Silicon, DO-201AE, PLASTIC PACKAGE-2
SENSITRON
©2020 ICPDF网 联系我们和版权申明