04853.15DR [LITTELFUSE]
Surface Mount Fuses; 表面安装熔断器型号: | 04853.15DR |
厂家: | LITTELFUSE |
描述: | Surface Mount Fuses |
文件: | 总3页 (文件大小:564K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Surface Mount Fuses
NANO2® > 600VDC > Fast-Acting 485 Series
485 Series Fuse
Description
The 485 Nano2 Fuse Series is a small, fast acting, surface
mount ceramic fuse rated at a remarkable 600VDC at its
small size and with 100A breaking capacity. It is primarily
designed for circuit protection in high energy applications.
This product is fully compatible with lead-free solders
alloys and higher temperature profiles associated with lead-
free assembly.
Features
•ꢀ FastꢀActingꢀ/ꢀSurfaceꢀ
mount high fuse for
high voltage (up to
•ꢀ Relativelyꢀhighꢀbreakingꢀ
capacity at 100A.
Agency Approvals
•ꢀꢀꢀꢀRoHSꢀcompliantꢀ/ꢀ
HalogenꢀFree
600VDC) applications.
AGENCY
AGENCY FILE NUMBER
E10480
AMPERE RANGE
•ꢀ Fullyꢀcompatibleꢀwithꢀ
lead-free solder alloys
and higher temperature
profiles associated with
lead-free assembly.
•ꢀꢀꢀꢀRatingꢀ-ꢀ0.5ꢀ-ꢀ3.15ꢀ
500mA – 3.15A
Amperes.
Electrical Characteristics for Series
Applications
% of Ampere
•ꢀ PCꢀserverꢀandꢀTelecomꢀ
•ꢀ 380VDCꢀserver/ꢀ
OpeningTime at 25ºC
4 hours, Minimum
60 Seconds, Maximum
Rating
100%
200%
systems
lighting in data center
•ꢀ LCDꢀTVꢀinverterꢀboardsꢀ
DC input protection
•ꢀ UniterruptibleꢀPowerꢀ
Supplyꢀ(UPS)ꢀ/ꢀ3-Phaseꢀ
Power Supplies
Electrical Specifications by Item
Agency Approvals
Ampere
Rating
(A)
Max.
Amp
Code
Nominal Cold
Resistance (Ohms)
Nominal Melting I2t
(A2Sec.)
Voltage
Interrupting Rating
Rating (V)
0.5
1
1.5
2
2.5
3.15
.500
1
1.5
2
2.5
3.15
600
600
600
600
600
600
0.807
0.264
0.123
0.0744
0.0583
0.0395
0.0354
0.3044
0.3917
0.8962
1.4921
3.304
P
x
x
x
x
x
100A @ 250V AC
100A @ 600V DC
Notes:
1.ꢀ Coldꢀresistanceꢀmeasuredꢀatꢀlessꢀthanꢀ10%ꢀofꢀratedꢀcurrentꢀatꢀ23°CC
2. Agency ApprovalTable Key. X=Approved or Certified, P=Pending and Blank=Not Approved.
3.ꢀI²tꢀvaluesꢀstatedꢀforꢀ8ꢀmsecꢀopeningꢀtime.
© 2012 Littelfuse, Inc.
485 Series
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
Revised: July 30, 2012
Surface Mount Fuses
NANO2® > 600VDC > Fast-Acting 485 Series
Temperature Rerating Curve
AverageTime Current Curves
100
10
1
0.1
0.01
0.001
0.1
1
10
100
1000
CURRENT IN AMPERE
Soldering Parameters - Reflow Soldering
tP
Reflow Condition
-Temperature Min (Ts(min)
Pb – free Assembly
TP
Critical Zone
Ramp-up
TL to TP
)
150°Cꢀ
TL
TS(max)
Pre Heat -Temperature Max (Ts(max)
)
200°C
tL
-Time (Min to Max) (ts)
60 – 120 seconds
Ramp-down
Average Ramp-up Rate (LiquidusTemp
(TL) to peak)
Preheat
5°C/secondꢀmax.
5°C/secondꢀmax.
TS(min)
tS
TS(max) toTL - Ramp-up Rate
-Temperature (TL) (Liquidus) 217°Cꢀ
25
Reflow
time to peak temperature
(t 25ºC to peak)
-Temperature (tL)
60ꢀ–ꢀ90ꢀseconds
Time
PeakTemperature (TP)
250+0/-5ꢀ°C
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
5°C/secondꢀmax.
8 minutes max.
260°C
Time 25°C to peakTemperature (TP)
Do not exceed
© 2012 Littelfuse, Inc.
485 Series
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
Surface Mount Fuses
NANO2® > 600VDC > Fast-Acting 485 Series
Product Characteristics
MILꢀ-STD-202,ꢀMethodꢀ107,ꢀ
Thermal Shock
Mechanical Shock
Vibration
TestꢀConditionꢀB,ꢀ5ꢀcycles,ꢀ-65°Cꢀtoꢀ125°C,ꢀ
Body: Ceramic
Cap: Silver Plated Brass
Materials
15 minutes @ each extreme
MILꢀ-STD-202,ꢀMethodꢀ213,ꢀ
Test Condition I: Deenergized. 100G’s
peak amplitude, sawtooth wave 6ms
duration,ꢀ3ꢀcyclesꢀXYZ+xyz=18ꢀshocks
Product Marking
Body: BrandꢀLogo,ꢀCurrentꢀRating
Operating
Temperature
MILꢀ-STD-202,ꢀMethodꢀ201:0.03”
amplitude,10-55Hzꢀinꢀ1ꢀmin.ꢀ2hrs.ꢀeach
XYZ=6hrs
-55°Cꢀtoꢀ125°Cꢀwithꢀproperꢀderating
Levelꢀ1ꢀJ-STD-020C
Mositure Sensitivity
Level
Moisture
Resistance
MILꢀ-STD-202,ꢀMethodꢀ106,ꢀ10ꢀcyclesꢀ
MILꢀ-ꢀSTD-202,ꢀMethodꢀ101,ꢀ
Test Condition B (48hrs)
Solderability
MILꢀ-STD-202,ꢀMethodꢀ208
Salt Spray
Insulation
Resistance
(after Opening)
MILꢀ-STD-202,ꢀMethodꢀ302,ꢀ
Test Condition A (10,000 ohms,
Minimum)
Resistance to
Soldering Heat
MILꢀ-ꢀSTD-202,ꢀMethodꢀ210,ꢀ
TestꢀConditionꢀBꢀ(10ꢀsecꢀatꢀ260°C)
Dimensions
Part Numbering System
0485 3.15 D R
SERIES
AMP Code *
Refer to Electrical
CharateristicsTable
QUANTITY Code
D= 1500 pieces
*Example
3.15ꢀampꢀisꢀ04853.15DR
PACKAGING Code
Rꢀ=ꢀTapeꢀandꢀReelꢀ
Packaging
Quantity &
Option Code
Packaging Option
Packaging Specification
Quantity
24mmꢀTapeꢀandꢀReel
EIA-RSꢀ481ꢀ-ꢀ1,ꢀIECꢀ286,ꢀPartꢀ3ꢀ
1500
DR
© 2012 Littelfuse, Inc.
485 Series
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
相关型号:
©2020 ICPDF网 联系我们和版权申明