LTV8192STA-V [LITEON]
High Density Mounting Type Photocoupler; 高密度安装型光电耦合器
| 型号： | LTV8192STA-V |
| 厂家： | 
LITE-ON TECHNOLOGY CORPORATION |
| 描述： | High Density Mounting Type Photocoupler |
| 文件： | 总5页 (文件大小：717K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
High Density Mounting
Type Photocoupler
LTV-819 Series
Features
Applications
Current transfer ratio
1. Telephone exchanges.
2. Computer terminals.
(CTR : MIN. 50% at IF=5mA, VCE=5V)
High input-output isolation voltage:
(VISO : 5,000Vrms)
3. System appliances, measuring instruments.
4. Signal transmission between circuits of different
potentials and impedances.
Compact dual-in-line package
LTV-819-1 : 1-channel type
LTV-819-2 : 1-channel type
LTV-829 : 2-channel type
LTV-849 : 4-channel type
UL approved (No. E113898)
Package Dimensions
TUV approved (No. R9653630)
CSA approved (No. CA91533-1)
FIMKO approved (No. 193422)
NEMKO approved (No. P96103013)
DEMKO approved (No. 303986)
SEMKO approved (No. 9646047/01-30)
VDE approved (No. 094722)
Options available :
-Leads with 0.4"(10.16mm)spacing (M Type)
-Leads bends for surface mounting(S Type)
-Tape and Reel of Type I for SMD(Add"-TA"Suffix)
-Tape and Reel of Type II for SMD(Add"-TA1"Suffix)
-VDE 0884 approvals (Add"-V"Suffix)
12-115
Note:
1.Year date code.
2. 2-digit work week.
3. Factory code shall be marked (Z : Taiwan, Y : Thailand).
4. All dimensions are in millimeters (inches).
5. Tolerance is
0.25mm (.010 ) unless otherwise noted.
6. Specifications are subject to change without notice.
Ordering Information
Application part
number
Part Number
Package
Safety Standard Approval
LTV-819-1
LTV-819-1M
LTV-819-1S
LTV-819-1S-TA
LTV-819-1S-TA1
4-pin DIP
UL approved
4-pin (leads with 0.4" spacing)
TUV approved
4-pin (lead bends for surface mount)
4-pin (tape and reel packaging of type I)
4-pin (tape and reel packaging of type II)
CSA approved
LTV-819-1
LTV-819-2
LTV-829
FIMKO approved
NEMKO approved
SEMKO approved
DEMKO approved
LTV-819-2
LTV-819-2M
LTV-819-2S
LTV-819-2S-TA
LTV-819-2S-TA1
4-pin DIP
4-pin (leads with 0.4" spacing)
4-pin (lead bends for surface mount)
4-pin (tape and reel packaging of type I)
4-pin (tape and reel packaging of type II)
LTV-829
8-pin DIP
LTV-829M
8-pin (leads with 0.4" spacing)
8-pin (lead bends for surface mount)
8-pin (tape and reel packaging of type I)
8-pin (tape and reel packaging of type II)
LTV-829S
LTV-829S-TA
LTV-829S-TA1
LTV-849
16-pin DIP
LTV-849M
16-pin (leads with 0.4" spacing)
16-pin (lead bends for surface mount)
16-pin (tape and reel packaging of type I)
16-pin (tape and reel packaging of type II)
LTV-849S
LTV-849S-TA
LTV-849S-TA1
LTV-849
LTV-819-1
LTV-819-2
LTV8191-V
4-pin DIP
VDE approved
LTV8191M-V
LTV8191S-V
LTV8191STA-V
LTV8191STA1-V
4-pin (leads with 0.4" spacing)
4-pin (lead bends for surface mount)
4-pin (tape and reel packaging of type I)
4-pin (tape and reel packaging of type II)
LTV8192-V
4-pin DIP
LTV8192M-V
LTV8192S-V
LTV8192STA-V
LTV8192STA1-V
4-pin (leads with 0.4" spacing)
4-pin (lead bends for surface mount)
4-pin (tape and reel packaging of type I)
4-pin (tape and reel packaging of type II)
LTV829-V
8-pin DIP
LTV829M-V
LTV829S-V
LTV829STA-V
LTV829STA1-V
8-pin (leads with 0.4" spacing)
8-pin (lead bends for surface mount)
8-pin (tape and reel packaging of type I)
8-pin (tape and reel packaging of type II)
LTV-829
LTV-849
LTV849-V
16-pin DIP
LTV849M-V
LTV849S-V
LTV849STA-V
LTV849STA1-V
16-pin (leads with 0.4" spacing)
16-pin (lead bends for surface mount)
16-pin (tape and reel packaging of type I)
16-pin (tape and reel packaging of type II)
12-116
Absolute Maximum Ratings
(Ta=25
Unit
)
Parameter
Symbol
Rating
Forward Current
IF
VR
50
6
mA
V
Input
Reverse Voltage
Power Dissipation
P
70
mW
V
Collector-Emitter Voltage
Emitter-Collector Voltage
Collector Current
VCEO
VECO
IC
35
6
V
Output
50
mA
mW
mW
Vrms
Collector Power Dissipation
PC
150
Ptot
Viso
Topr
Tstg
Tsol
170
Total Power Dissipation
*1.Isolation Voltage
5,000
-25~+100
-40~+125
260
Operating Temperature
Storage Temperature
*2.Soldering Temperature
*1. AC for 1 minute, R.H. = 40 ~ 60%
Isolation voltage shall be measured using the following method.
(1)Short between anode and cathode on the primary side and between collector, emitter and base on the secondary side.
(2)The isolation voltage tester with zero-cross circuit shall be used.
(3)The waveform of applied volttage shall be a sine wave.
*2. For 10 seconds.
Electrical/Optical Characteristics
(Ta=25
Conditions
)
Parameter
Symbol
Min.
Typ.
Max.
Unit
Forward Voltage
1.2
1.4
10
V
A
IF=20mA
VF
IR
Reverse Current
VR=4V
Terminal Capacitance
Collector Dark Current
30
250
100
pF
nA
V=0, f=1KHz
VCE=20V
Ct
ICEO
Collector-Emitter
Breakdown Voltage
Emitter-Collector
Breakdown Voltage
35
6
V
V
BVCEO
BVECO
IC=0.1mA
IE=10
A
20
mA
%
Collector Current
IC
2.5
50
IF=5mA, VCE=5V
*Current Transfer Ratio
CTR
400
Collector-emitter
Saturation Voltage
Isolation Resistance
IF=20mA, IC=1mA
VCE(sat)
0.1
0.2
V
1011
0.6
DC500V, 40~60% R.H.
5
1010
RISO
Cf
pF
1
Floating Capacitance
V=0, f=1MHz
VCE=5V, IC=2mA
RL=100 , -3dB
KHz
fc
80
Cut-off Frequency
s
s
Response Time (Rise)
Response Time (Fall)
IC
tr
tf
4
3
VCE=2V, IC=2mA
RL=100
*CTR=
100%
IF
12-117
Typical Electrical/Optical Characteristic Curves
(25 Ambient Temperature Unless Otherwise Noted)
12-118
12-119
相关型号：
©2020 ICPDF网 联系我们和版权申明