ANT-2.4-CW-QW-SMA [LINX]
Rugged & damage-resistant;型号: | ANT-2.4-CW-QW-SMA |
厂家: | Linx Technologies |
描述: | Rugged & damage-resistant |
文件: | 总2页 (文件大小:364K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
ANT-2.4-CW-QW
Data Sheet
by
Product Description
Ø7.8 mm
(0.31”)
CW Series ½-wave antennas deliver outstanding
performance in a rugged and cosmetically attractive
package. The internal ground reference reduces
dependance on an external ground plane. These
antennas are available with standard SMA or FCC
Part 15 compliant RP-SMA connectors. RP-SMA
connectors allow for easy field replacement while
complying with FCC requirements. A wide variety
of matching connectors permit numerous mounting
options.
13.5 mm
(0.53”)
Ø5.7 mm
(0.22”)
105.0 mm
(4.13”)
Features
•ꢀ Low cost
5.0 mm
(0.20”)
•ꢀ Excellent performance
•ꢀ Omni-directional pattern
•ꢀ Wide bandwidth
•ꢀ Very low VSWR
•ꢀ Fully weatherized
14.5 mm
(0.57”)
•ꢀ Flexible main shaft
•ꢀ Rugged & damage-resistant
•ꢀ SMA or Part 15 compliant RP-SMA connector
•ꢀ Use with plastic or metal enclosures
1/4-36 UNS
Electrical Specifications
Center Frequency:
Recom. Freq. Range:
Wavelength:
2.45GHz
2.35–2.60GHz
½-wave
Peak Gain:
1.1dBi
VSWR:
Impedance:
<1.9 typ. at center
50-ohms
Connector:
Oper. Temp. Range:
RP-SMA or SMA
–40°C to +90°C
Electrical specifications and plots measured on 10.16 cm x
10.16 cm (4.00" x 4.00") reference ground plane
Ordering Information
ANT-2.4-CW-QW-RPS (with RP-SMA connector)
ANT-2.4-CW-QW-SMA (with SMA connector)
– 1 –
Revised 12/9/13
VSWR Graph
VSWR
3:1
1.545
Reflected Power
25%
2:1
11%
1:1
0%
2.35GHz
2.45GHz
2.55GHz
What is VSWR?
The Voltage Standing Wave Ratio (VSWR) is a measurement of how well
an antenna is matched to a source impedance, typically 50-ohms. It is
calculated by measuring the voltage wave that is headed toward the load
versus the voltage wave that is reflected back from the load. A perfect
match will have a VSWR of 1:1. The higher the first number, the worse the
match, and the more inefficient the system. Since a perfect match cannot
ever be obtained, some benchmark for performance needs to be set. In
the case of antenna VSWR, this is usually 2:1. At this point, 88.9% of the
energy sent to the antenna by the transmitter is radiated into free space
and 11.1% is either reflected back into the source or lost as heat on
the structure of the antenna. In the other direction, 88.9% of the energy
recovered by the antenna is transferred into the receiver. As a side note,
since the “:1” is always implied, many data sheets will remove it and just
display the first number.
How to Read a VSWR Graph
VSWR is usually displayed graphically versus frequency. The lowest point
on the graph is the antenna’s operational center frequency. In most cases,
this will be different than the designed center frequency due to fabrication
tolerances. The VSWR at that point denotes how close to 50-ohms the
antenna gets. Linx specifies the recommended bandwidth as the range
where the typical antenna VSWR is less than 2:1.
159 Ort Lane, Merlin, OR, US 97532
Phone: +1 541 471 6256
Fax: +1 541 471 6251
Data Sheet ANT-2.4-CW-QW
– 2 –
by
www.linxtechnologies.com
相关型号:
©2020 ICPDF网 联系我们和版权申明