LA15B-SR-W69S [LIGITEK]
LED ARRAY; LED阵列型号: | LA15B-SR-W69S |
厂家: | LIGITEK ELECTRONICS CO., LTD. |
描述: | LED ARRAY |
文件: | 总6页 (文件大小:108K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
LED ARRAY
Pb
Lead-Free Parts
LA15B/SR-W69S
DATA SHEET
DOC. NO : QW0905-LA15B/SR-W69S
REV.
: A
DATE
: 26 - Feb. - 2008
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
PART NO. LA15B/SR-W69S
Page 1/5
Package Dimensions
4.5
3.0±0.5
0.8
11.3
6.0
RED WIRE
BLACK WIRE
150±20
14.0
5.08
LSR3133-PF
4.75
7.65
1.5MAX
25.0MIN
0.5
TYP
1.0MIN
2.54TYP
+
-
Note : 1.All dimension are in millimeter tolerance is ±0.25mm unless otherwise noted.
2.Specifications are subject to change without notice.
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
PART NO. LA15B/SR-W69S
Page
2/5
Absolute Maximum Ratings at Ta=25 ℃
Ratings
SR
Symbol
Parameter
UNIT
IF
IFP
30
Forward Current
mA
mA
mW
Peak Forward Current
Duty 1/10@10KHz
100
Power Dissipation
PD
Ir
100
Reverse Current @5V
Operating Temperature
Storage Temperature
10
μA
℃
Topr
Tstg
-40 ~ +85
-40 ~ +100
℃
Typical Electrical & Optical Characteristics (Ta=25 ℃)
Forward
voltage
@20mA(V)
Viewing
Peak
wave
length
λPnm
Luminous
intensity
@20mA(mcd)
Spectral
halfwidth
△λnm
angle
2θ1/2
(deg)
COLOR
PART NO
MATERIAL
Typ.
Emitted
Red
Lens
Min. Max. Min.
Water Clear
660
20
1.5
2.4 160 300
30
LA15B/SR-W69S GaAlAs
Note : 1.The forward voltage data did not including ±0.1V testing tolerance.
2. The luminous intensity data did not including ±15% testing tolerance.
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
PART NO. LA15B/SR-W69S
Page 3/5
Typical Electro-Optical Characteristics Curve
SR CHIP
Fig.1 Forward current vs. Forward Voltage
Fig.2 Relative Intensity vs. Forward Current
3.0
2.5
2.0
1.5
1.0
0.5
0.0
1000
100
10
1.0
0.1
1.0
10
100
1000
1.0
2.0
3.0
4.0
5.0
Forward Current(mA)
Forward Voltage(V)
Fig.3 Forward Voltage vs. Temperature
Fig.4 Relative Intensity vs. Temperature
3.0
1.2
2.5
2.0
1.1
1.0
1.5
1.0
0.5
0.9
0.8
0.0
-40
-20
0
20
40
60
80
100
-40
-20
0
20
40
60
80 100
Ambient Temperature(℃)
Ambient Temperature(℃)
Fig.5 Relative Intensity vs. Wavelength
1.0
0.5
0.0
600
650
700
750
Wavelength (nm)
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
PART NO. LA15B/SR-W69S
Page 4/5
Soldering Condition(Pb-Free)
1.Iron:
Soldering Iron:30W Max
Temperature 350°C Max
Soldering Time:3 Seconds Max(One time only)
Distance:2mm Min(From solder joint to case)
2.Wave Soldering Profile
Dip Soldering
Preheat: 120°C Max
Preheat time: 60seconds Max
Ramp-up
2°C/sec(max)
Ramp-Down:-5°C/sec(max)
Solder Bath:260°C Max
Dipping Time:3 seconds Max
Distance:2mm Min(From solder joint to case)
Temp(°C)
260°C3sec Max
260°
5°/sec
max
120°
2°/sec
25°
0°
max
0
50
150
Time(sec)
100
Preheat
60 Seconds Max
Note: 1.Wave solder should not be made more than one time.
2.You can just only select one of the soldering conditions as above.
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
PART NO. LA15B/SR-W69S
Page 5/5
Reliability Test:
Reference
Standard
Description
Test Item
Test Condition
1.Under Room Temperature
2.If=20mA
3.t=1000 hrs (-24hrs, +72hrs)
This test is conducted for the purpose
of detemining the resistance of a part
in electrical and themal stressed.
MIL-STD-750: 1026
MIL-STD-883: 1005
JIS C 7021: B-1
Operating Life Test
The purpose of this is the resistance of
the device which is laid under condition
of high temperature for hours.
High Temperature
Storage Test
1.Ta=105 ℃±5℃
2.t=1000 hrs (-24hrs, +72hrs)
MIL-STD-883:1008
JIS C 7021: B-10
The purpose of this is the resistance
of the device which is laid under
condition of low temperature for hours.
Low Temperature
Storage Test
1.Ta=-40℃±5℃
2.t=1000 hrs (-24hrs, +72hrs)
JIS C 7021: B-12
1.Ta=65℃±5℃
2.RH=90%~95%
3.t=240hrs ±2hrs
High Temperature
High Humidity Test
The purpose of this test is the resistance
of the device under tropical for hours.
MIL-STD-202:103B
JIS C 7021: B-11
The purpose of this is the resistance of
the device to sudden extreme changes
in high and low temperature.
1.Ta=105 ℃±5℃&-40℃±5℃
(10min) (10min)
2.total 10 cycles
MIL-STD-202: 107D
MIL-STD-750: 1051
MIL-STD-883: 1011
Thermal Shock Test
This test intended to determine the
thermal characteristic resistance
of the device to sudden exposures
at extreme changes in temperature
when soldering the lead wire.
MIL-STD-202: 210A
MIL-STD-750: 2031
JIS C 7021: A-1
Solder Resistance
Test
1.T.Sol=260 ℃±5℃
2.Dwell time= 10 ±1sec.
MIL-STD-202: 208D
MIL-STD-750: 2026
MIL-STD-883: 2003
JIS C 7021: A-2
This test intended to see soldering well
performed or not.
1.T.Sol=230 ℃±5℃
2.Dwell time=5 ±1sec
Solderability Test
相关型号:
©2020 ICPDF网 联系我们和版权申明