LTCA10.7MS3 [LGE]
Ceramic Filter Series; 陶瓷过滤器系列型号: | LTCA10.7MS3 |
厂家: | LGE |
描述: | Ceramic Filter Series |
文件: | 总5页 (文件大小:268K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
LTCA10.7MS3
Ceramic Filter Series
1. Features and Applications
The LTCA10.7MS3 filters are small,high performance and very thin(1.5mm) chip
devides consisting of 2 ceramic elements for communication equipment.They
are designed on MgTiO3 ceramic cap package.The filers exhibit flat GDT
characteristic in pass band.The filters are recommended for digital
communication applications and are perfect in hand held cellular phines,pocket
cordless phones, etc.
2. Appearances and Dimendions
Appdarances: smooth surface and clear mark. No visible damage and dirt.
Dimensions: According to Figure 1.
http://www.luguang.cn
mail:lge@luguang.cn
LTCA10.7MS3
Ceramic Filter Series
3. Electrical Characteristics
Items
Requirements
A:10.700MHz± 30kHz max.
C;10.730 MHz± 30kHz max.
E;10.760 MHz± 30kHz max
B:10.670 MHz± 30kHz max.
D;10.640 MHz± 30kHz max
Center
Frequency(f0)
The center point of 3db band width is defined as the center frequency
and identified by the letters:A,B,C,D or E
3dB Bandwidth
1830 ± 40kHz
20 dB Bandwidth
470kHz max
Insertion loss(at fn)
Ripple(within 3dB Bandwidth)
Spurious Response(9MHz-12MHz)
Input/Output Impedance
4. Rating
4.0±2.0dB
1.0dB max
35dB min
330Ω
Items
Spec
4.1
4.2
4.3
4.4
Withstanding Voltage
DC 50v 1 minutes
Insulation Resistance
100MΩ min.(DC 10V)
-25~+85℃
Operating temperature range
Storage temperature range
-40~+85℃
5. Measuring method
Measuring Condition
Parts shall be measured under a cndition (Temperature:25±3℃,Humidity;65±5﹪
R.H.)unless the standard condition(Temperature:20±15℃,Humidity;65±20﹪R.H)
is regulated to measure.
Measuring circuit
R1=280Ω±5%, R2=330Ω±5%,Rg=50Ω ①: Input
C2=10Pf(Including stray capacitance
and capacitance of RF Voltmeter)
②: Ground
③:Output
http://www.luguang.cn
mail:lge@luguang.cn
LTCA10.7MS3
Ceramic Filter Series
6. Reliability Specifications
Item
Test Condition
Spec
6.1
6.2
6.3
LowTemp
Storage
High Temp
Storage
Stored in _40±3℃for 96 hours, and left at room
temp.for 1 hour before measurement.
Stored in 85±2℃ for 96 hours, and left at room
temp.for 1 hour before measurement.
Stored at40±2,in90~95﹪R.H.for96 hours ,and left
at room temp.for 1 hour before measurement.
Meet Table 1
Meet Table 1
Meet Table 1
Humidity Test
6.4
After temp.cycling of _40℃(30minutes) to +85℃
(30minutes) was performed 5 times, filter shall be
measured after being placed in natural condition for
1 hour.
Thermal Shock
Meet Table 1
6.5 Soldering Test
Passed thtough the reflow oven under the following Meet Table 1
condition for 2 times, and left at room temp. for 24
hours before measurement.
Temp. at the surface Time
Of the substeate
Preheat 150±5℃
Peak 235±5℃
60~100sec
Less than 10 sec
6.6 Solderability
Dipped in 35±5℃ solder bath for 3±0.5
Seconds with rosin flrx
The terminals
Shall be at least95
﹪ covered by
solder
6.7 Drop test
6.8 Vibration
Free drop to the wood plate from the height of 70
cm for 3 times.
Meet Table 1
Apply the vibration of weep frequency 10 to
55Hz/minutes,amplitude 1.5mm, duration 2 hours
in each direction of 3 planes.
Meet Table 1
6.9 Board Bending Mount on a glass-epoxy
Mechanical
board(width=50mm,thickness=1.6mm)then bend it damage such as
to 1mm displacement(velocity 1mm/sec) and keep
it for 5 seconds
break shall not
occur
http://www.luguang.cn
mail:lge@luguang.cn
LTCA10.7MS3
Ceramic Filter Series
Tablel Characteristics change limit in reliability test
Characteristics
Insertion Loss
Change Iimit
±2dB max
3db bandwidth
20dB Bandwidth
7.Packaging
±25kHz max
±60kHz max
7.1 Reel Dimensions
7.2 Taping Dimensions
http://www.luguang.cn
mail:lge@luguang.cn
LTCA10.7MS3
Ceramic Filter Series
7.3 Tape Characteristics
7.4 Reel Quantity:4000pcs/reel or 1000pcs/reel
7.5 Every reel is vacuum packed.(at 300 Torr of vacuum rate).
8. Notices
8.1 Please avoid cleaning this chip ceramic filter.
8.2 Please contact us if you want to use the product in specital occasion.
http://www.luguang.cn
mail:lge@luguang.cn
相关型号:
©2020 ICPDF网 联系我们和版权申明