L1043GD [KINGBRIGHT]
Single Color LED, Green, Diffused, 5.58mm, ROHS COMPLIANT PACKAGE-2;型号: | L1043GD |
厂家: | KINGBRIGHT CORPORATION |
描述: | Single Color LED, Green, Diffused, 5.58mm, ROHS COMPLIANT PACKAGE-2 光电 |
文件: | 总3页 (文件大小:70K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
3.65x6.15mm SINGLE CHIP LED LIGHT BAR
L-1043GD
GREEN
Features
Description
ꢀFLAT RECTANGULAR LIGHT EMITTING SURFACE.
ꢀSINGLE COLOR.
The Green source color devices are made with
Gallium Phosphide Green Light Emitting Diode.
ꢀIDEAL AS FLUSH MOUNTED PANEL INDICATORS.
ꢀEXCELLENT ON/OFF CONTRAST.
ꢀLONG LIFE - SOLID STATE RELIABILITY.
ꢀTHIS SERIES ARE TIN-DIPPED.
ꢀRoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. Specifications are subject to change without notice.
SPEC NO: DSAB2484
APPROVED: J. Lu
REV NO: V.5
DATE: MAR/22/2005
DRAWN: B.H.LI
PAGE: 1 OF 3
CHECKED: Allen Liu
Selection Guide
Iv (mcd)
@ 10mA
Viewing
Angle
Part No.
Dice
Lens Type
2 θ 1/2
100°
Min.
Typ.
L-1043GD
GREEN (GaP)
GREEN DIFFUSED
1
4
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°C
Symbol
λpeak
λD
Parameter
Peak Wavelength
Dominant Wavelength
Spectral Line Half-width
Capacitance
Device
Typ.
565
568
30
Max.
Units
nm
nm
nm
pF
Test Conditions
IF=20mA
Green
Green
Green
Green
Green
Green
IF=20mA
IF=20mA
∆λ1/2
C
15
VF=0V;f=1MHz
IF=20mA
VF
Forward Voltage
2.2
2.5
10
V
IR
Reverse Current
uA
VR = 5V
Absolute Maximum Ratings at TA=25°C
Parameter
Green
Units
mW
mA
Power dissipation
DC Forward Current
105
25
Peak Forward Current [1]
Reverse Voltage
140
mA
V
5
Operating/Storage Temperature
Lead Solder Temperature [2]
Lead Solder Temperature [3]
-40°C To +85°C
260°C For 3 Seconds
260°C For 5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
SPEC NO: DSAB2484
APPROVED: J. Lu
REV NO: V.5
DATE: MAR/22/2005
DRAWN: B.H.LI
PAGE: 2 OF 3
CHECKED: Allen Liu
Green
L-1043GD
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
SPEC NO: DSAB2484
APPROVED: J. Lu
REV NO: V.5
DATE: MAR/22/2005
DRAWN: B.H.LI
PAGE: 3 OF 3
CHECKED: Allen Liu
©2020 ICPDF网 联系我们和版权申明