KPTR-3216SYCK [KINGBRIGHT]
3.2x1.6mm SMD CHIP LED LAMP; 3.2x1.6mm SMD贴片LED LAMP
| 型号： | KPTR-3216SYCK |
| 厂家： | 
KINGBRIGHT CORPORATION |
| 描述： | 3.2x1.6mm SMD CHIP LED LAMP |
| 文件： | 总5页 (文件大小：441K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
3.2x1.6mm SMD CHIP LED LAMP
Part Number: KPTR-3216SYCK
Super Bright Yellow
Features
Description
z 3.2mmx1.6mm SMD LED,1.05mm thickness.
z Low power consumption.
The Super Bright Yellow device is made with AlGaInP (on
GaAs substrate) light emitting diode chip.
z Wide viewing angle.
z Ideal for backlight and indicator.
z Package : 2000pcs / reel.
z Moisture sensitivity level : level 3.
z RoHS compliant.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4.The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAD0228
APPROVED: Wynec
REV NO: V.11B
DATE: FEB/23/2016
DRAWN: J.L.Liang
PAGE: 1 OF 5
CHECKED: Allen Liu
ERP: 1203002428
Selection Guide
Iv (mcd) [2]
@ 20mA
Viewing
Angle [1]
Part No.
Emitting Color (Material)
Lens Type
Min.
Typ.
2θ1/2
KPTR-3216SYCK
Notes:
Super Bright Yellow (AlGaInP)
Water Clear
80
150
120°
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous Flux: +/-15%.
3. Luminous intensity value is traceable to CIE127-2007 standards.
Electrical / Optical Characteristics at TA=25°C
Symbol
λpeak
λD [1]
Δλ1/2
C
Parameter
Peak Wavelength
Dominant Wavelength
Spectral Line Half-width
Capacitance
Emitting Color
Typ.
590
590
20
Max.
Units
Test Conditions
IF=20mA
Super Bright Yellow
Super Bright Yellow
Super Bright Yellow
Super Bright Yellow
Super Brig
Sught w
m
nm
nm
pF
V
IF=20mA
IF=20mA
0
VF=0V;f=1MHz
IF=20mA
VF [2]
IR
Forward Voltage
2
2.5
10
Reverse Current
uA
VR=5V
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is tracele tCIE127-07 sandards.
4. Excess driving current and / ating teperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Values
75
Units
mW
mA
mA
V
Power dissipation
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
30
175
5
Operating Temperature
Storage Temperature
-40°C To +85°C
-40°C To +85°C
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static
electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
SPEC NO: DSAD0228
APPROVED: Wynec
REV NO: V.11B
DATE: FEB/23/2016
DRAWN: J.L.Liang
PAGE: 2 OF 5
CHECKED: Allen Liu
ERP: 1203002428
Super Bright Yellow
KPTR-3216SYCK
SPEC NO: DSAD0228
APPROVED: Wynec
REV NO: V.11B
DATE: FEB/23/2016
DRAWN: J.L.Liang
PAGE: 3 OF 5
CHECKED: Allen Liu
ERP: 1203002428
KPTR-3216SYCK
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reeenion
Tape Dimensions
(Units : mm)
SPEC NO: DSAD0228
APPROVED: Wynec
REV NO: V.11B
DATE: FEB/23/2016
DRAWN: J.L.Liang
PAGE: 4 OF 5
CHECKED: Allen Liu
ERP: 1203002428
PACKING & LABEL SPECIFICATIONS
KPTR-3216SYCK
Terms and conditions for the usage of this document
1. The information included in this document reflects representative usage scenarios and is intended for technical reference only.
2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without
notice. Before production usage customer should refer to the latest datasheet for the updated specifications.
3. When using the products referenced in this document, please make sure the product is being operated within the environmental
and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible
for any subsequent issues.
4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has
special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with
Kingbright representative for further assistance.
5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright.
6. All design applications should refer to Kingbright application notes available at http://www.kingbright.com/application_notes
SPEC NO: DSAD0228
APPROVED: Wynec
REV NO: V.11B
DATE: FEB/23/2016
DRAWN: J.L.Liang
PAGE: 5 OF 5
CHECKED: Allen Liu
ERP: 1203002428
相关型号：
KPTR-3216ZGC-E
SINGLE COLOR LED, GREEN, 1.4mm, 3.20 X 1.60 MM, 1.05 MM HEIGHT, ROHS COMPLIANT, SMD, 2 PIN
KINGBRIGHT
KPTR01B14-5P
MIL Series Connector, 5 Contact(s), Aluminum Alloy, Male, Solder Terminal, Receptacle, ROHS COMPLIANT
ITT
©2020 ICPDF网 联系我们和版权申明