KPDA02-102 [KINGBRIGHT]
7 SEG NUMERIC DISPLAY, SUPER BRIGHT GREEN, 5.08mm, SMT, 20 PIN;
| 型号： | KPDA02-102 |
| 厂家： | 
KINGBRIGHT CORPORATION |
| 描述： | 7 SEG NUMERIC DISPLAY, SUPER BRIGHT GREEN, 5.08mm, SMT, 20 PIN 光电 |
| 文件： | 总4页 (文件大小：114K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SURFACE MOUNT DISPLAY
P/N: KPDA02-102
SUPER BRIGHT GREEN
Features
Description
ꢀ0.2 INCH DIGIT HEIGHT.
The Super Bright Green source color devices are made
with Gallium Phosphide Green Light Emitting Diode.
ꢀLOW CURRENT OPERATION.
ꢀEXCELLENT CHARACTER APPEARANCE.
ꢀI.C. COMPATIBLE.
ꢀMECHANICALLY RUGGED.
ꢀPACKAGE :300PCS / REEL.
ꢀGRAY FACE, WHITE SEGMENT.
ꢀRoHS COMPLIANT.
Package Dimensions & Internal Circuit Diagram
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. Specifications are subject to change without notice.
SPEC NO: DSAB4382
APPROVED: J. Lu
REV NO: V.7
DATE: NOV/23/2005
DRAWN: Y.W.WANG
PAGE: 1 OF 4
CHECKED: Joe Lee
Selection Guide
Iv (ucd)
@ 10mA
Part No.
Dice
Lens Type
Description
Min.
1900
Typ.
Common Anode, Rt.
Hand Decimal.
KPDA02-102
SUPER BRIGHT GREEN (GaP)
WHITE DIFFUSED
10000
Electrical / Optical Characteristics at TA=25°C
Symbol
λpeak
λD
Parameter
Peak Wavelength
Dominant Wavelength
Spectral Line Half-width
Capacitance
Device
Typ.
Max.
Units
nm
nm
nm
pF
Test Conditions
IF=20mA
Super Bright Green
Super Bright Green
Super Bright Green
Super Bright Green
Super Bright Green
Super Bright Green
565
568
30
IF=20mA
IF=20mA
∆λ1/2
C
15
VF=0V;f=1MHz
IF=20mA
VF
Forward Voltage
2.2
2.5
10
V
IR
Reverse Current
uA
VR = 5V
Absolute Maximum Ratings at TA=25°C
Parameter
Super Bright Green
Units
mW
mA
mA
V
Power dissipation
105
25
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
140
5
Operating/Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAB4382
APPROVED: J. Lu
REV NO: V.7
DATE: NOV/23/2005
DRAWN: Y.W.WANG
PAGE: 2 OF 4
CHECKED: Joe Lee
Super Bright Green
KPDA02-102
SPEC NO: DSAB4382
APPROVED: J. Lu
REV NO: V.7
CHECKED: Joe Lee
DATE: NOV/23/2005
DRAWN: Y.W.WANG
PAGE: 3 OF 4
KPDA02-102
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
Remarks:
If special sorting is required (e.g. binning based on forward voltagminous intensity/ luminous flux, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous intensity/ luminous flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
SPEC NO: DSAB4382
APPROVED: J. Lu
REV NO: V.7
DATE: NOV/23/2005
DRAWN: Y.W.WANG
PAGE: 4 OF 4
CHECKED: Joe Lee
相关型号：
©2020 ICPDF网 联系我们和版权申明