KP-2012F3C [KINGBRIGHT]
kingbright 2.0mm*1.25mm*1.1mm 0805;型号: | KP-2012F3C |
厂家: | KINGBRIGHT CORPORATION |
描述: | kingbright 2.0mm*1.25mm*1.1mm 0805 |
文件: | 总5页 (文件大小:262K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
2.0x1.25mm INFRARED EMITTING DIODE
Part Number: KP-2012F3C
Features
Description
z 2.0mmx1.25mm SMD LED,1.1mm thickness.
z Mechanically and spectrally matched to the phototransistor.
z Package: 2000pcs / reel.
F3 Made with Gallium Arsenide Infrared Emitting diodes.
z Moisture sensitivity level : level 3.
z RoHS compliant.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAA4437
APPROVED: Wynec
REV NO: V.15A
DATE: OCT/30/2015
DRAWN: L.Q.Xie
PAGE: 1 OF 5
CHECKED: Allen Liu
ERP: 1203000103
Selection Guide
Po (mW/sr) [2]
@ 20mA
Viewing
Angle [1]
Part No.
Emitting Color (Material)
Lens Type
Min.
1.2
Typ.
3
2θ1/2
KP-2012F3C
Notes:
Infrared (GaAs)
Water Clear
120°
*0.8
*2
1. θ1 / 2 is the angle from optical centerline where the luminous intensity is 1 / 2 of the optical peak value.
2. Radiant intensity / luminous Flux: + / -15%.
* Radiant intensity value is traceable to the CIE127-2007 compliant national standards.
Electrical / Optical Characteristics at TA=25°C
Parameter
P/N
F3
F3
F3
F3
F3
Symbol
Typ.
Max.
1.6
Units
Test Conditions
IF=20mA
Forward Voltage [1]
Reverse Current
Capacitance
VF
1.2
V
IR
uA
pF
nm
nm
VR = 5V
C
90
90
50
VF=0V;f=1MHz
IF=20mA
Peak Spectral Wavelength
Spectral Bandwidth
λP
IF=20mA
Notes:
1. Forward Voltage: + / -0.1V.
2. Wavelength value is traceable to the IE127-007 ompanal standards.
3. Excess driving current and / or oerating temeratuhigher tharecommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Symbol
Values
Units
mW
mA
A
Power dissipation
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
PD
80
IF
50
1.2
iFS
VR
5
V
Operating Temperature
Storage Temperature
TA
-40 To +85
-40 To +85
°C
TSTG
°C
Note:
1. 1 / 100 Duty Cycle, 10μs Pulse Width.
SPEC NO: DSAA4437
APPROVED: Wynec
REV NO: V.15A
CHECKED: Allen Liu
DATE: OCT/30/2015
DRAWN: L.Q.Xie
PAGE: 2 OF 5
ERP: 1203000103
KP-2012F3C
13751197819
2016.03.22
A lice
SPEC NO: DSAA4437
APPROVED: Wynec
REV NO: V.15A
DATE: OCT/30/2015
DRAWN: L.Q.Xie
PAGE: 3 OF 5
CHECKED: Allen Liu
ERP: 1203000103
KP-2012F3C
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reeenion
Tape Specifications
(Units : mm)
13751197819
2016.03.22
A lice
SPEC NO: DSAA4437
APPROVED: Wynec
REV NO: V.15A
DATE: OCT/30/2015
DRAWN: L.Q.Xie
PAGE: 4 OF 5
CHECKED: Allen Liu
ERP: 1203000103
PACKING & LABEL SPECIFICATIONS
KP-2012F3C
13751197819
2016.03.22
A lice
Terms and conditions for the usage of this document
1. The information included in this document reflects representative usage scenarios and is intended for technical reference only.
2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without
notice. Before production usage customer should refer to the latest datasheet for the updated specifications.
3. When using the products referenced in this document, please make sure the product is being operated within the environmental
and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible
for any subsequent issues.
4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has
special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with
Kingbright representative for further assistance.
5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright.
6. All design applications should refer to Kingbright application notes available at http://www.kingbright.com/application_notes
SPEC NO: DSAA4437
APPROVED: Wynec
REV NO: V.15A
DATE: OCT/30/2015
DRAWN: L.Q.Xie
PAGE: 5 OF 5
CHECKED: Allen Liu
ERP: 1203000103
相关型号:
KP-2012MGC
Single Color LED, Mega Green, Water Clear, 1.3mm, 2 X 1.25 MM, 1.10 MM HEIGHT, SURFACE MOUNT PACKAGE-2
KINGBRIGHT
KP-2012PBC-A
Single Color LED, Blue, Water Clear, 1.3mm, 2 X 1.25 MM, 1.10 MM HEIGHT, SURFACE MOUNT PACKAGE-2
KINGBRIGHT
KP-2012QBC-D
Single Color LED, Blue, Water Clear, 1.3mm, 2 X 1.25 MM, 1.10 MM HEIGHT, ROHS COMPLIANT, SURFACE MOUNT PACKAGE-2
KINGBRIGHT
KP-2012SEC
Single Color LED, Super Bright Orange, Water Clear, 1.3mm, 2 X 1.25 MM, 1.10 MM HEIGHT, SURFACE MOUNT PACKAGE-2
KINGBRIGHT
KP-2012SECK
Single Color LED, Super Bright Orange, Water Clear, 1.3mm, 2 X 1.25 MM, 1.10 MM HEIGHT, ROHS COMPLIANT, SURFACE MOUNT PACKAGE-2
KINGBRIGHT
KP-2012SGC
Single Color LED, Super Bright Green, Water Clear, 1.3mm, 2 X 1.25 MM, 1.10 MM HEIGHT, ROHS COMPLIANT, SURFACE MOUNT PACKAGE-2
KINGBRIGHT
KP-2012SRC-PRV
Single Color LED, Super Bright Red, Water Clear, 1.3mm, 2 X 1.25 MM, 1.10 MM HEIGHT, SURFACE MOUNT PACKAGE-2
KINGBRIGHT
©2020 ICPDF网 联系我们和版权申明