KAA-3528SURKZGQBDS [KINGBRIGHT]
Triple Color LED, Hyr-gre-blu, Water Clear, 2.4mm, ROHS COMPLIANT, SMT, 4 PIN;型号: | KAA-3528SURKZGQBDS |
厂家: | KINGBRIGHT CORPORATION |
描述: | Triple Color LED, Hyr-gre-blu, Water Clear, 2.4mm, ROHS COMPLIANT, SMT, 4 PIN 光电 |
文件: | 总8页 (文件大小:319K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
3.5x2.8mm SURFACE MOUNT LED LAMP
Part Number: KAA-3528SURKZGQBDS
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
Hyper Red
Green
Blue
SENSITIVE
DEVICES
Features
Description
z Suitable for all SMT assembly and solder process.
z Available on tape and reel.
The Hyper Red source color devices are made with Al-
GaInP on GaAs substrate Light Emitting Diode.
The Green source color devices are made with InGaN
on Sapphire Light Emitting Diode.
z Package: 1500pcs / reel.
z Moisture sensitivity level : level 3.
z RoHS compliant.
The Blue source color devices are made with InGaN Light
Emitting Diode.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or anti-electrostatic
glove when handling the LEDs.
All devices, equipment and machinery must be electrically
grounded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAK9915
APPROVED: WYNEC
REV NO: V.3
DATE: JUL/11/2011
DRAWN: J.Yu
PAGE: 1 OF 8
CHECKED: Allen Liu
ERP: 1201006667
Handling Precautions
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic
significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.
As a result, special handling precautions need to be observed during assembly using silicone encapsulated
LED products. Failure to comply might lead to damage and premature failure of the LED.
1. Handle the component along the side surfaces by using forceps or appropriate tools.
2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or
damage the internal circuitry.
4.1. The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks.
4.2. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup.
4.3. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup
and avoid damage during production.
5. As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plating of
leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances.
SPEC NO: DSAK9915
APPROVED: WYNEC
REV NO: V.3
DATE: JUL/11/2011
DRAWN: J.Yu
PAGE: 2 OF 8
CHECKED: Allen Liu
ERP: 1201006667
Selection Guide
Iv (mcd) [2]
@ 20mA
Viewing
Angle [1]
Part No.
Dice
Lens Type
Min.
200
480
70
Typ.
320
700
130
2θ1/2
Hyper Red (AlGaInP)
Green (InGaN)
KAA-3528SURKZGQBDS
Notes:
Water Clear
120°
Blue (InGaN)
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
Max.
Units
Test Conditions
Hyper Red
Green
650
515
468
λpeak
Peak Wavelength
nm
IF=20mA
Blue
Hyper Red
Green
630
525
470
λD [1]
Δλ1/2
C
Dominant Wavelength
Spectral Line Half-width
Capacitance
nm
nm
pF
V
IF=20mA
IF=20mA
Blue
Hyper Red
Green
28
30
25
Blue
Hyper Red
Green
35
45
100
VF=0V;f=1MHz
IF=20mA
Blue
Hyper Red
Green
1.95
3.3
3.3
2.5
4.1
4
VF [2]
IR
Forward Voltage
Blue
Hyper Red
Green
10
50
50
Reverse Current
uA
VR=5V
Blue
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Hyper Red
Green
Blue
120
30
Units
mW
mA
mA
V
Power dissipation
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
75
30
123
30
185
150
5
150
Operating Temperature
Storage Temperature
-40°C To +85°C
-40°C To +85°C
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAK9915
APPROVED: WYNEC
REV NO: V.3
CHECKED: Allen Liu
DATE: JUL/11/2011
DRAWN: J.Yu
PAGE: 3 OF 8
ERP: 1201006667
KAA-3528SURKZGQBDS
Hyper Red
SPEC NO: DSAK9915
APPROVED: WYNEC
REV NO: V.3
CHECKED: Allen Liu
DATE: JUL/11/2011
DRAWN: J.Yu
PAGE: 4 OF 8
ERP: 1201006667
Green
SPEC NO: DSAK9915
APPROVED: WYNEC
REV NO: V.3
DATE: JUL/11/2011
DRAWN: J.Yu
PAGE: 5 OF 8
CHECKED: Allen Liu
ERP: 1201006667
Blue
SPEC NO: DSAK9915
APPROVED: WYNEC
REV NO: V.3
DATE: JUL/11/2011
DRAWN: J.Yu
PAGE: 6 OF 8
CHECKED: Allen Liu
ERP: 1201006667
KAA-3528SURKZGQBDS
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension
Tape Dimensions
(Units : mm)
yalin
PEC 專用,
數位簽署者:yal
:cn=yal n,o,ou=S
emai =yal n@ yal n.com,c=<無>
日期 2011.07.1114:00:55+08'00'
in
D
N
i
l
i
i
SPEC NO: DSAK9915
APPROVED: WYNEC
REV NO: V.3
DATE: JUL/11/2011
DRAWN: J.Yu
PAGE: 7 OF 8
CHECKED: Allen Liu
ERP: 1201006667
PACKING & LABEL SPECIFICATIONS
KAA-3528SURKZGQBDS
SPEC NO: DSAK9915
APPROVED: WYNEC
REV NO: V.3
DATE: JUL/11/2011
DRAWN: J.Yu
PAGE: 8 OF 8
CHECKED: Allen Liu
ERP: 1201006667
相关型号:
KAA-5060SURVGPBEC
T-1 TRIPLE COLOR LED, HYPER RED/GREEN/BLUE, 3.2mm, 5 X 6 MM, SMT, 4 PIN
KINGBRIGHT
KAA00B209M-TGQV0
Memory Circuit, 16MX16, CMOS, PBGA127, 10.50 X 12 MM, 0.80 MM PITCH, TBGA-127
SAMSUNG
KAA00B209M-TGQX0
Memory Circuit, 16MX16, CMOS, PBGA127, 10.50 X 12 MM, 0.80 MM PITCH, TBGA-127
SAMSUNG
KAA00B209M-TGSX0
Memory Circuit, 16MX16, CMOS, PBGA127, 10.50 X 12 MM, 0.80 MM PITCH, TBGA-127
SAMSUNG
©2020 ICPDF网 联系我们和版权申明