KA-2810AZGS-E [KINGBRIGHT]
SINGLE COLOR LED, GREEN, 2.3mm, ROHS COMPLIANT, SMD, 2 PIN;型号: | KA-2810AZGS-E |
厂家: | KINGBRIGHT CORPORATION |
描述: | SINGLE COLOR LED, GREEN, 2.3mm, ROHS COMPLIANT, SMD, 2 PIN 光电 |
文件: | 总6页 (文件大小:244K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
2.8X0.8mm RIGHT ANGLE SMD CHIP LED
LAMP
Part Number: KA-2810AZGS-E
Green
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
Description
z 2.8mmX0.8mm right angle SMT LED, 1.2mm thickness.
z Low power consumption.
The Green source color devices are made with InGaN Light
Emitting Diode.
z Ideal for backlight and indicator.
z Various colors and lens types available.
z Package : 2000pcs / reel.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or anti-electrostatic
glove when handling the LEDs.
z Moisture sensitivity level : level 3.
z RoHS compliant.
All devices, equipment and machinery must be electrically
grounded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.0039") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAK6836
APPROVED: WYNEC
REV NO: V.2
DATE: FEB/24/2011
DRAWN: D.M.Su
PAGE: 1 OF 6
CHECKED: Allen Liu
ERP: 1201005946
Handling Precautions
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic
significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.
As a result, special handling precautions need to be observed during assembly using silicone encapsulated
LED products. Failure to comply might leads to damage and premature failure of the LED.
1. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
2. As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plating of
leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances.
數位簽署者:yalin
DN:cn=yalin,o,
ou=SPEC 專用,
email=yalin@ yalin.com
c=<無>
日期 2011.02.2508:29:57
+08'00'
,
yalin
SPEC NO: DSAK6836
APPROVED: WYNEC
REV NO: V.2
DATE: FEB/24/2011
DRAWN: D.M.Su
PAGE: 2 OF 6
CHECKED: Allen Liu
ERP: 1201005946
Selection Guide
Iv (mcd) [2]
@ 20mA
Viewing
Angle [1]
Part No.
Dice
Lens Type
Min.
Typ.
2θ1/2
KA-2810AZGS-E
Notes:
Green (InGaN)
WATER CLEAR
700
1000
110°
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
λpeak
λD [1]
Δλ1/2
C
Parameter
Peak Wavelength
Dominant Wavelength
Spectral Line Half-width
Capacitance
Device
Green
Green
Green
Green
Green
Green
Typ.
520
525
35
Max.
Units
Test Conditions
IF=20mA
nm
nm
nm
pF
V
IF=20mA
IF=20mA
100
3.2
VF=0V;f=1MHz
IF=20mA
VF [2]
IR
Forward Voltage
4
Reverse Current
50
uA
VR=5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Green
Units
mW
mA
mA
V
Power dissipation
120
30
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
100
5
Operating Temperature
Storage Temperature
-40°C To +85°C
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAK6836
APPROVED: WYNEC
REV NO: V.2
DATE: FEB/24/2011
DRAWN: D.M.Su
PAGE: 3 OF 6
CHECKED: Allen Liu
ERP: 1201005946
Green
KA-2810AZGS-E
SPEC NO: DSAK6836
APPROVED: WYNEC
REV NO: V.2
DATE: FEB/24/2011
DRAWN: D.M.Su
PAGE: 4 OF 6
CHECKED: Allen Liu
ERP: 1201005946
KA-2810AZGS-E
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension
Tape Dimensions
(Units : mm)
SPEC NO: DSAK6836
APPROVED: WYNEC
REV NO: V.2
DATE: FEB/24/2011
DRAWN: D.M.Su
PAGE: 5 OF 6
CHECKED: Allen Liu
ERP: 1201005946
PACKING & LABEL SPECIFICATIONS
KA-2810AZGS-E
SPEC NO: DSAK6836
APPROVED: WYNEC
REV NO: V.2
DATE: FEB/24/2011
DRAWN: D.M.Su
PAGE: 6 OF 6
CHECKED: Allen Liu
ERP: 1201005946
相关型号:
KA-3020ACGCK
SINGLE COLOR LED, GREEN, 2mm, 3 X 2 MM, 1.40 MM HEIGHT, ROHS COMPLIANT PACKAGE-2
KINGBRIGHT
KA-3020AMGC
SINGLE COLOR LED, MEGA GREEN, 2mm, 3 X 2 MM, 1.40 MM HEIGHT, ROHS COMPLIANT PACKAGE-2
KINGBRIGHT
KA-3020APBS-Z
SINGLE COLOR LED, BLUE, 2mm, 3 X 2 MM, 1.40 MM HEIGHT, ROHS COMPLIANT PACKAGE-2
KINGBRIGHT
KA-3020ASURC
SINGLE COLOR LED, HYPER RED, 2mm, 3 X 2 MM, 1.40 MM HEIGHT, ROHS COMPLIANT PACKAGE-2
KINGBRIGHT
KA-3020ASURCK
SINGLE COLOR LED, HYPER RED, 2mm, 3 X 2 MM, 1.40 MM HEIGHT, ROHS COMPLIANT PACKAGE-2
KINGBRIGHT
KA-3020ASYC
SINGLE COLOR LED, SUPER BRIGHT YELLOW, 2mm, 3 X 2 MM, 1.40 MM HEIGHT, ROHS COMPLIANT PACKAGE-2
KINGBRIGHT
KA-3020AVGC-A
SINGLE COLOR LED, GREEN, 2mm, 3 X 2 MM, 1.40 MM HEIGHT, ROHS COMPLIANT PACKAGE-2
KINGBRIGHT
KA-3020CGCK
Single Color LED, Green, Water Clear, 2mm, 3 X 2 MM, 1.40 MM HEIGHT, ROHS COMPLIANT, SMT, 2 PIN
KINGBRIGHT
©2020 ICPDF网 联系我们和版权申明