APHHS1005LCGCK [KINGBRIGHT]
kingbright 1.0mm*0.5mm*0.5mm 0402 绿光;
| 型号： | APHHS1005LCGCK |
| 厂家： | 
KINGBRIGHT CORPORATION |
| 描述： | kingbright 1.0mm*0.5mm*0.5mm 0402 绿光 |
| 文件： | 总5页 (文件大小：220K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
1.0X0.5mm SMD CHIP LED LAMP
Part Number: APHHS1005LCGCK
Green
Alice 13751197819
Description
Features
The Green source color devices are made with AlGaInP on
GaAs substrate Light Emitting Diode.
z 1.0mmX0.5mm SMD LED, 0.5mm thickness.
z Low power consumption.
z Wide viewing angle.
z Ideal for backlight and indicator.
z Package: 2000pcs / reel .
z Moisture sensitivity level : level 3.
z Low current IF=2mA operating.
z RoHS compliant.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAO4018
APPROVED: Wynec
REV NO: V.1B
DATE: JUL/03/2015
DRAWN: F.T.Liu
PAGE: 1 OF 5
CHECKED: Allen Liu
ERP: 1203015117
Selection Guide
Iv (mcd) [2]
@ 2mA
Viewing
Angle [1]
Part No.
Emitting Color (Material)
Lens Type
Min.
Typ.
2θ1/2
APHHS1005LCGCK
Notes:
Green (AlGaInP)
Water Clear
1.2
3.5
120°
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Electrical / Optical Characteristics at TA=25°C
Symbol
λpeak
λD [1]
Δλ1/2
C
Parameter
Peak Wavelength
Dominant Wavelength
Spectral Line Half-width
Capacitance
Emitting Color
Green
Min.
Typ.
574
570
20
Max.
Units
nm
nm
nm
pF
Test Conditions
IF=2mA
Green
IF=2mA
Green
IF=2mA
Green
15
VF=0V;f=1MHz
IF=2mA
VF [2]
IR
Forward Voltage
Green
1.5
1.9
2.2
10
V
Reverse Current
Green
uA
VR=5V
Notes:
1. Wavelength: + / -1nm.
2. Forward Voltage: + / -0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Values
66
Units
mW
mA
mA
V
Power dissipation
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
30
150
5
Operating Temperature
Storage Temperature
-40°C To +85°C
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAO4018
APPROVED: Wynec
REV NO: V.1B
CHECKED: Allen Liu
DATE: JUL/03/2015
DRAWN: F.T.Liu
PAGE: 2 OF 5
ERP: 1203015117
GREEN
Green
APHHS1005LCGCK
SPEC NO: DSAO4018
APPROVED: Wynec
REV NO: V.1B
DATE: JUL/03/2015
DRAWN: F.T.Liu
PAGE: 3 OF 5
CHECKED: Allen Liu
ERP: 1203015117
APHHS1005LCGCK
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension
Tape Dimensions
(Units : mm)
SPEC NO: DSAO4018
APPROVED: Wynec
REV NO: V.1B
DATE: JUL/03/2015
DRAWN: F.T.Liu
PAGE: 4 OF 5
CHECKED: Allen Liu
ERP: 1203015117
PACKING & LABEL SPECIFICATIONS
APHHS1005LCGCK
Terms and conditions for the usage of this document
1. The information included in this document reflects representative usage scenarios and is intended for technical reference only.
2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without
notice. Before production usage customer should refer to the latest datasheet for the updated specifications.
3. When using the products referenced in this document, please make sure the product is being operated within the environmental
and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible
for any subsequent issues.
4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has
special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with
Kingbright representative for further assistance.
5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright.
6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes
SPEC NO: DSAO4018
APPROVED: Wynec
REV NO: V.1B
DATE: JUL/03/2015
DRAWN: F.T.Liu
PAGE: 5 OF 5
CHECKED: Allen Liu
ERP: 1203015117
相关型号：
©2020 ICPDF网 联系我们和版权申明