APA1606ZGC [KINGBRIGHT]
1.6*0.6*1.2mm SMD LED kingbright 今台;型号: | APA1606ZGC |
厂家: | KINGBRIGHT CORPORATION |
描述: | 1.6*0.6*1.2mm SMD LED kingbright 今台 可见光LED 光电 |
文件: | 总5页 (文件大小:591K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
1.6x0.6mm RIGHT ANGLE SMD CHIP LED
LAMP
Part Number: APA1606ZGC
Green
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
Descriptions
z 1.6mmx1.2mmx0.6mm right angle SMD LED,0.6mm thickness.
z Low power consumption.
z The Green source color devices are made with InGaN
Light Emitting Diode.
z Wide viewing angle.
z Electrostatic discharge and power surge could damage
the LEDs.
z Ideal for backlight and indicator.
z Package :2000pcs / reel.
z It is recommended to use a wrist band or anti-
electrostatic glove when handling the LEDs.
z All devices, equipment and machinery must be electri
cally grounded.
z Moisture sensitivity level : level 3.
z Tinned pads for improved solderability.
z RoHS compliant.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
代理商深圳市容感科技有限公司
程梦:0755-83539752
DATE: AUG/02/2016
DRAWN: L.T.Zhang
QQ:2093686917
SPEC NO: DSAH3851
APPROVED: Wynec
REV NO: V.9B
CHECKED: Allen Liu
PAGE: 1 OF 5
ERP: 1203003655
Selection Guide
Iv (mcd) [2]
@ 20mA
Viewing
Angle [1]
Part No.
Emitting Color (Material)
Lens Type
Min.
Typ.
2θ1/2
APA1606ZGC
Notes:
Green (InGaN)
Water Clear
200
400
110°
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
3. Luminous intensity value is traceable to CIE127-2007 standards.
Electrical / Optical Characteristics at TA=25°C
Symbol
λpeak
λD [1]
Δλ1/2
C
Parameter
Peak Wavelength
Dominant Wavelength
Spectral Line Half-width
Capacitance
Emitting Color
Green
Typ.
515
525
30
Max.
Units
nm
nm
nm
pF
Test Conditions
IF=20mA
Green
IF=20mA
Green
IF=20mA
Green
45
VF=0V;f=1MHz
IF=20mA
VF [2]
IR
Forward Voltage
Green
3.3
4.1
50
V
Reverse Current
Green
uA
VR=5V
Notes:
1.Wavelength: +/-1nm.
2.Forward Voltage: +/-0.1V.
3.Wavelength value is traceable to CIE127-2007 standards.
4.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Values
102.5
25
Units
mW
mA
mA
V
Power dissipation
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
150
5
Electrostatic Discharge Threshold (HBM)
Operating Temperature
Storage Temperature
450
V
-40°C To +85°C
-40°C To +85°C
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static
electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
代理商深圳市容感科技有限公司
程梦:0755-83539752
DATE: AUG/02/2016
DRAWN: L.T.Zhang
QQ:2093686917
SPEC NO: DSAH3851
APPROVED: Wynec
REV NO: V.9B
CHECKED: Allen Liu
PAGE: 2 OF 5
ERP: 1203003655
Green
APA1606ZGC
代理商深圳市容感科技有限公司
程梦:0755-83539752
DATE: AUG/02/2016
DRAWN: L.T.Zhang
QQ:2093686917
SPEC NO: DSAH3851
APPROVED: Wynec
REV NO: V.9B
CHECKED: Allen Liu
PAGE: 3 OF 5
ERP: 1203003655
APA1606ZGC
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension
Tape Dimensions
(Units : mm)
代理商深圳市容感科技有限公司
程梦:0755-83539752
DATE: AUG/02/2016
DRAWN: L.T.Zhang
QQ:2093686917
SPEC NO: DSAH3851
APPROVED: Wynec
REV NO: V.9B
PAGE: 4 OF 5
CHECKED: Allen Liu
ERP: 1203003655
PACKING & LABEL SPECIFICATIONS
APA1606ZGC
Terms and conditions for the usage of this document
1. The information included in this document reflects representative usage scenarios and is intended for technical reference only.
2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without
notice. Before production usage customer should refer to the latest datasheet for the updated specifications.
3. When using the products referenced in this document, please make sure the product is being operated within the environmental
and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible
for any subsequent issues.
4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has
special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with
Kingbright representative for further assistance.
5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright.
6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes
代理商深圳市容感科技有限公司
程梦:0755-83539752
DATE: AUG/02/2016
DRAWN: L.T.Zhang
QQ:2093686917
SPEC NO: DSAH3851
APPROVED: Wynec
REV NO: V.9B
CHECKED: Allen Liu
PAGE: 5 OF 5
ERP: 1203003655
相关型号:
APA1606ZGC/G
SINGLE COLOR LED, GREEN, 1.2mm, 1.60 X 0.60 MM, 1.20 MM HEIGHT, ROHS COMPLIANT, SMD, 2 PIN
KINGBRIGHT
©2020 ICPDF网 联系我们和版权申明