AAA3528SEKJ3ZGKQBKS [KINGBRIGHT]
LED RGB 625NM 525NM 465NM 4PLCC;型号: | AAA3528SEKJ3ZGKQBKS |
厂家: | KINGBRIGHT CORPORATION |
描述: | LED RGB 625NM 525NM 465NM 4PLCC 光电 |
文件: | 总8页 (文件大小:359K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
3.5x2.8mm SURFACE MOUNT LED LAMP
Part Number: AAA3528SEKJ3ZGKQBKS
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
Hyper Red
Green
Blue
SENSITIVE
DEVICES
Features
Descriptions
z Suitable for all SMT assembly and solder process.
z Available on tape and reel.
z The Hyper Red device is based on light emitting diode
chip made from AlGaInP.
z Package: 2000pcs / reel.
z The Green source color devices are made with InGaN
on Sapphire Light Emitting Diode.
z Moisture sensitivity level : level 3.
z RoHS compliant.
z The Blue source color devices are made with InGaN on
Sapphire Light Emitting Diode.
z Electrostatic discharge and power surge could damage
the LEDs.
z It is recommended to use a wrist band or anti-
electrostatic glove when handling the LEDs.
z All devices, equipments and machineries must be
electrically grounded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAO2423
APPROVED: WYNEC
REV NO: V.1B
DATE: APR/09/2015
DRAWN: L.Q.Xie
PAGE: 1 OF 8
CHECKED: Allen Liu
ERP: 1201008886
Handling Precautions
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic
significantly Orangeuces thermal stress, it is more susceptible to damage by external mechanical force.
As a result, special handling precautions need to be observed during assembly using silicone encapsulated
LED products. Failure to comply might lead to damage and premature failure of the LED.
1. Handle the component along the side surfaces by using forceps or appropriate tools.
2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or
damage the internal circuitry.
4.1. The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks.
4.2. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup.
4.3. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup
and avoid damage during production.
5. As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plating of
leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances.
SPEC NO: DSAO2423
APPROVED: WYNEC
REV NO: V.1B
DATE: APR/09/2015
DRAWN: L.Q.Xie
PAGE: 2 OF 8
CHECKED: Allen Liu
ERP: 1201008886
Selection Guide
Iv (mcd) [2]
@ 20mA
Viewing
Angle [1]
Part No.
Dice
Lens Type
Min.
400
400
80
Typ.
500
600
200
2θ1/2
Hyper Red (AlGaInP)
AAA3528SEKJ3ZGKQBKS
Notes:
Green (InGaN)
Blue (InGaN)
Water Clear
120°
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous Flux: +/-15%.
3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
Max.
Units
Test Conditions
Hyper Red
Green
640
515
460
λpeak
Peak Wavelength
nm
nm
nm
pF
V
IF=20mA
Blue
Hyper Red
Green
625
525
465
λD [1]
Δλ1/2
C
Dominant Wavelength
Spectral Line Half-width
Capacitance
IF=20mA
IF=20mA
Blue
Hyper Red
Green
20
35
25
Blue
Hyper Red
Green
27
45
100
VF=0V;f=1MHz
IF=20mA
Blue
Hyper Red
Green
2.2
3.3
3.3
2.8
4.1
4
VF [2]
IR
Forward Voltage
Blue
Hyper Red
Green
10
50
50
Reverse Current
uA
VR=5V
Blue
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
4. Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Hyper Red
Green
123
30
Blue
120
30
Units
mW
mA
mA
V
Power dissipation
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
140
50
150
150
5
150
Operating Temperature
Storage Temperature
-40°C To +85°C
-40°C To +85°C
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAO2423
APPROVED: WYNEC
REV NO: V.1B
DATE: APR/09/2015
DRAWN: L.Q.Xie
PAGE: 3 OF 8
CHECKED: Allen Liu
ERP: 1201008886
AAA3528SEKJ3ZGKQBKS
Hyper Red
SPEC NO: DSAO2423
APPROVED: WYNEC
REV NO: V.1B
CHECKED: Allen Liu
DATE: APR/09/2015
DRAWN: L.Q.Xie
PAGE: 4 OF 8
ERP: 1201008886
Green
SPEC NO: DSAO2423
APPROVED: WYNEC
REV NO: V.1B
DATE: APR/09/2015
DRAWN: L.Q.Xie
PAGE: 5 OF 8
CHECKED: Allen Liu
ERP: 1201008886
Blue
SPEC NO: DSAO2423
APPROVED: WYNEC
REV NO: V.1B
DATE: APR/09/2015
DRAWN: L.Q.Xie
PAGE: 6 OF 8
CHECKED: Allen Liu
ERP: 1201008886
AAA3528SEKJ3ZGKQBKS
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension
Tape Dimensions
(Units : mm)
SPEC NO: DSAO2423
APPROVED: WYNEC
REV NO: V.1B
DATE: APR/09/2015
DRAWN: L.Q.Xie
PAGE: 7 OF 8
CHECKED: Allen Liu
ERP: 1201008886
PACKING & LABEL SPECIFICATIONS
AAA3528SEKJ3ZGKQBKS
Terms and conditions for the usage of this document
1. The information included in this document reflects representative usage scenarios and is intended for technical reference only.
2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without
notice. Before production usage customer should refer to the latest datasheet for the updated specifications.
3. When using the products referenced in this document, please make sure the product is being operated within the environmental
and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible
for any subsequent issues.
4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has
special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with
Kingbright representative for further assistance.
5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright.
6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes
SPEC NO: DSAO2423
APPROVED: WYNEC
REV NO: V.1B
DATE: APR/09/2015
DRAWN: L.Q.Xie
PAGE: 8 OF 8
CHECKED: Allen Liu
ERP: 1201008886
相关型号:
AAA3528SURKCGKS
Dual Color LED, Hyper Red/green, Water Clear, 2.4mm, 3.50 X 2.80 MM, ROHS COMPLIANT, SMT, 4 PIN
KINGBRIGHT
©2020 ICPDF网 联系我们和版权申明