AA4040SESK [KINGBRIGHT]
Single Color LED, Super Bright Orange, Water Clear, 2.4mm, ROHS COMPLIANT, SMT, 2 PIN;
| 型号： | AA4040SESK |
| 厂家： | 
KINGBRIGHT CORPORATION |
| 描述： | Single Color LED, Super Bright Orange, Water Clear, 2.4mm, ROHS COMPLIANT, SMT, 2 PIN 光电 |
| 文件： | 总6页 (文件大小：291K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
4.0x4.0mm RIGHT ANGLE SURFACE MOUNT
LED LAMP
Part Number: AA4040SESK
Super Bright Orange
Features
Description
z Single color.
The Super Bright Orange device is made with AlGaInP (on
GaAs substrate) light emitting diode chip.
z Suitable for all SMT assembly and solder process.
z Available on tape and reel.
z Ideal for backlighting.
z Package : 500pcs / reel.
z Moisture sensitivity level : level 3.
z RoHS compliant.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAL0883
APPROVED: WYNEC
REV NO: V.6A
DATE: MAR/16/2015
DRAWN: P.Cheng
PAGE: 1 OF 6
CHECKED: Allen Liu
ERP: 1201006829
Handling Precautions
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic
significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.
As a result, special handling precautions need to be observed during assembly using silicone encapsulated
LED products. Failure to comply might lead to damage and premature failure of the LED.
1. Handle the component along the side surfaces by using forceps or appropriate tools.
2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
3. As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plating of
leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances.
SPEC NO: DSAL0883
APPROVED: WYNEC
REV NO: V.6A
DATE: MAR/16/2015
DRAWN: P.Cheng
PAGE: 2 OF 6
CHECKED: Allen Liu
ERP: 1201006829
Selection Guide
Iv (mcd) [2]
@ 20mA
Viewing
Angle [1]
Part No.
Dice
Lens Type
Min.
200
*80
Typ.
450
2θ1/2
AA4040SESK
Notes:
Super Bright Orange (AlGaInP)
Water Clear
120°
*220
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
*Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Electrical / Optical Characteristics at TA=25°C
Symbol
λpeak
λD [1]
Δλ1/2
C
Parameter
Peak Wavelength
Dominant Wavelength
Spectral Line Half-width
Capacitance
Device
Typ.
610
601
29
Max.
Units
Test Conditions
IF=20mA
Super Bright Orange
Super Bright Orange
Super Bright Orange
Super Bright Orange
Super Bright Orange
Super Bright Orange
nm
nm
nm
pF
V
IF=20mA
IF=20mA
15
VF=0V;f=1MHz
IF=20mA
VF [2]
IR
Forward Voltage
2.1
2.5
10
Reverse Current
uA
VR=5V
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
4. Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Super Bright Orange
Units
mW
mA
mA
V
Power dissipation
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
75
30
195
5
Operating Temperature
Storage Temperature
-40°C To +85°C
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAL0883
APPROVED: WYNEC
REV NO: V.6A
CHECKED: Allen Liu
DATE: MAR/16/2015
DRAWN: P.Cheng
PAGE: 3 OF 6
ERP: 1201006829
Super Bright Orange
AA4040SESK
SPEC NO: DSAL0883
APPROVED: WYNEC
REV NO: V.6A
CHECKED: Allen Liu
DATE: MAR/16/2015
DRAWN: P.Cheng
PAGE: 4 OF 6
ERP: 1201006829
AA4040SESK
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension
Tape Dimensions
(Units : mm)
SPEC NO: DSAL0883
APPROVED: WYNEC
REV NO: V.6A
DATE: MAR/16/2015
DRAWN: P.Cheng
PAGE: 5 OF 6
CHECKED: Allen Liu
ERP: 1201006829
PACKING & LABEL SPECIFICATIONS
AA4040SESK
Terms and conditions for the usage of this document
1. The information included in this document reflects representative usage scenarios and is intended for technical reference only.
2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without
notice. Before production usage customer should refer to the latest datasheet for the updated specifications.
3. When using the products referenced in this document, please make sure the product is being operated within the environmental
and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible
for any subsequent issues.
4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has
special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with
Kingbright representative for further assistance.
5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright.
6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes
SPEC NO: DSAL0883
APPROVED: WYNEC
REV NO: V.6A
DATE: MAR/16/2015
DRAWN: P.Cheng
PAGE: 6 OF 6
CHECKED: Allen Liu
ERP: 1201006829
相关型号：
AA4040SRS
Single Color LED, Super Bright Red, Water Clear, 2.4mm, ROHS COMPLIANT, SMT, 2 PIN
KINGBRIGHT
©2020 ICPDF网 联系我们和版权申明