PMR205AC6100M033R30 [KEMET]
Metallized Impregnated Paper, 125 VAC/250 VDC;
| 型号： | PMR205AC6100M033R30 |
| 厂家： | 
KEMET CORPORATION |
| 描述： | Metallized Impregnated Paper, 125 VAC/250 VDC |
| 文件： | 总12页 (文件大小：2699K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
AC Line EMI Suppression and RC Networks
PMR205 Series Metallized Impregnated Paper,
125 VAC/250 VDC
Overview
Applications
The PMR205 Series is constructed of multilayer metallized paper
encapsulated and impregnated in self-extinguishing material
meeting the requirements of UL 94 V–0.
Typical applications include worldwide use in contact protection,
contact interference suppression and transient suppression.
Benefits
• Rated voltage: 125 VAC/250 VDC, 50/60 Hz
• Capacitance range: 0.1 – 1.0 µF
• Capacitance tolerance: ±20%
• High dV/dt capability
• Impregnated paper ensures excellent stability and reliability
properties, particularly in applications with continuous operation
•ꢀ Resistanceꢀrange:ꢀ22ꢀ–ꢀ680ꢀΩ
• Resistance tolerance: ±30%
• Lead spacing: 15.2 – 25.4 mm
• Climatic category: 40/085/56/B, IEC 60068–1
• Tape and reel packaging in accordance with IEC 60286–2
• RoHS Compliant and lead-free terminations
•ꢀ Operatingꢀtemperatureꢀrangeꢀofꢀ-40˚Cꢀtoꢀ+85˚C
• Excellent self-healing properties which ensure long life even
when subjected to frequent over voltages
• Good resistance to ionization due to impregnated paper dielectric
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
Legacy Part Number System
PMR205
A
B
6100
M
033
R30
Capacitance Code
(pF)
Capacitance
Tolerance
Series
Rated Voltage (VAC) Lead Spacing (mm)
Resistanceꢀ(Ω)
Packaging
RC Snubber,
Metallized Paper
A = 125
B = 15.2
C = 20.3
E = 25.4
The last three digits
representꢀsignificantꢀ
figures.ꢀTheꢀfirstꢀdigitꢀ
specifiesꢀtheꢀtotalꢀ
number of digits.
M = ±20%
Resistance Value
See Ordering
Options Table
inꢀΩ
New KEMET Part Number System
104
M
125
A
H330
P
405
Q
E
Capacitor
Class
Lead Spacing
(mm)
Capacitance Rated Voltage
Series
Size Code
Capacitance Code (pF)
Packaging
Resistanceꢀ(Ω)
Tolerance
(VAC)
P = Metallized RC Snubber Q = 15.2
See
Dimension
Table
First two digits represent
significantꢀfigures.ꢀThirdꢀ
digitꢀspecifiesꢀnumberꢀofꢀ
zeros.
M = ±20%
125 = 125
See Ordering Hꢀplusꢀfirstꢀtwoꢀdigitsꢀ
Options Table representꢀsignificantꢀ
figures.ꢀThirdꢀdigitꢀ
Paper
C = 20.3
E = 25.4
specifiesꢀnumberꢀofꢀ
zeros.
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3024_PMR205 • 5/15/2015
1
Film Capacitors
AC Line EMI Suppression and RC Networks – PMR205 Series Metallized Impregnated Paper, 125 VAC/250 VDC
Ordering Options Table
Lead
Spacing
Nominal
(mm)
KEMET
Lead and
Packaging Packaging
Legacy
Lead and
Lead Length
(mm)
Type of Leads and Packaging
Code
Code
Standard Lead and Packaging Options
Bulk (Bag) – Short Leads
6ꢀ+0/-1
30ꢀ+5/-0
C
A
L
R06
R30
Bulk (Bag) – Max Length Leads
Tape & Reel (Standard Reel)
15.2
H0=ꢀ18.5ꢀ+/-0.5
R19T0
Other Lead and Packaging Options
Tape & Reel (Large Reel)
H0=ꢀ18.5ꢀ+/-0.5
P
R19T1
Standard Lead and Packaging Options
Bulk (Tray) – Short Leads
6ꢀ+0/-1
30ꢀ+5/-0
C
A
L
R06
R30
Bulk (Bag) – Max Length Leads
Tape & Reel (Standard Reel)
20.3
25.4
H0=ꢀ18.5ꢀ+/-0.5
R19T0
Other Lead and Packaging Options
Tape & Reel (Large Reel)
H0=ꢀ18.5ꢀ+/-0.5
P
R19T1
Standard Lead and Packaging Options
Bulk (Bag) – Short Leads
6ꢀ+0/-1
C
A
R06
R30
Bulk (Tray) – Max Length Leads
30ꢀ+5/-0
Dimensions – Millimeters
FRONT VIEW
SIDE VIEW
L
B
H
d
LL
p
p
B
H
L
d
Size Code
Nominal
Tolerance
Nominal
Tolerance
Nominal
Tolerance
Nominal
Tolerance
Nominal
Tolerance
QE
QM
QP
CE
CJ
15.2
15.2
15.2
20.3
20.3
20.3
25.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
5.2
7.3
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
10.5
13.0
13.5
14.0
15.0
16.5
16.1
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
18.5
18.5
18.5
24.0
24.0
24.0
30.5
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
0.8
0.8
0.8
0.8
0.8
0.8
1.0
+/-0.05
+/-0.05
+/-0.05
+/-0.05
+/-0.05
+/-0.05
+/-0.05
7.8
7.6
9.0
CP
EE
11.3
10.6
Note: See Ordering Options Table for lead length (LL) options.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3024_PMR205 • 5/15/2015
2
Film Capacitors
AC Line EMI Suppression and RC Networks – PMR205 Series Metallized Impregnated Paper, 125 VAC/250 VDC
Performance Characteristics
Rated Voltage
Capacitance Range
Capacitance Tolerance
Resistance Range
125 VAC 50/60 Hz
0.1 – 1.0 µF
±20%
22ꢀ–ꢀ680ꢀΩ
±30%
Resistance Tolerance
Temperature Range
Climatic Category
-40°Cꢀtoꢀ+85°C
40/085/56/B
375 V
Peak Pulse Voltage
Theꢀseriesꢀresistanceꢀisꢀdefinedꢀatꢀ1ꢀkHzꢀforꢀRCꢀ≥ꢀ50ꢀµsꢀandꢀatꢀ100ꢀ
kHz for RC < 50 µs
Series Resistance
Minimum Values Between Terminals
Insulation Resistance
Cꢀ≤ꢀ0.33ꢀµF
≥ꢀ3,000ꢀMΩ
C > 0.33 µF
≥ꢀ1,000ꢀMΩꢀ•ꢀµF
The average losses may reach 0.5 W provided the surface
temperatureꢀdoesꢀnotꢀexceedꢀ+ꢀ85°C.ꢀForꢀmaximumꢀpermittedꢀpowerꢀ
dissipation vs. temperature, see Derating Curves.
Maximum Allowable Power Dissipation vs. Ambient Temperature and
Case Sizes.
Power Ratings
Derating Curves
ºC
Curve
Dimension B (mm)
1
2
2
3
4
5
5.2
7.3
7.8
7.6
9
11.3
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3024_PMR205 • 5/15/2015
3
Film Capacitors
AC Line EMI Suppression and RC Networks – PMR205 Series Metallized Impregnated Paper, 125 VAC/250 VDC
Environmental Test Data
Test
Vibration
IEC Publication
IEC 60068–2–6 Test Fc
IEC 60068–2–29 Test Eb
IEC 60068–2–78 Test Cab
Procedure
3 directions at 2 hours each 10 – 500 Hz at 0.75 mm or 98 m/s2
4,000 bumps at 390 m/s2
Bump
Damp Heat Steady State
+40°Cꢀandꢀ93%ꢀRH,ꢀ56ꢀdays
Environmental Compliance
All KEMET EMI capacitors are RoHS Compliant.
Table 1 – Ratings & Part Number Reference
Maximum Dimensions in mm
Lead
Spacing (p)
Capacitance Resistance
New KEMET
Part Number
Legacy Part Number
Value (µF)
(Ω)
B
H
L
15.2
15.2
15.2
15.2
15.2
15.2
15.2
15.2
15.2
15.2
15.2
15.2
15.2
15.2
15.2
20.3
20.3
20.3
20.3
20.3
20.3
20.3
20.3
20.3
20.3
25.4
20.3
20.3
20.3
20.3
20.3
0.10
0.10
0.10
0.10
0.15
0.15
0.22
0.22
0.22
0.22
0.22
0.25
0.25
0.25
0.33
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
1.0
33
47
100
220
68
5.2
5.2
5.2
5.2
5.2
5.2
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.8
7.6
7.6
7.6
7.6
10.5
10.5
10.5
10.5
10.5
10.5
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.5
14.0
14.0
14.0
14.0
14.0
14.0
14.0
14.0
15.0
16.5
16.1
16.5
16.5
16.5
16.5
16.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
24.0
24.0
24.0
24.0
24.0
24.0
24.0
24.0
24.0
24.0
30.5
24.0
24.0
24.0
24.0
24.0
P405QE104M125(1)H330
P405QE104M125(1)H470
P405QE104M125(1)H101
P405QE104M125(1)H221
P405QE154M125(1)H680
P405QE154M125(1)H101
P405QM224M125(1)H470
P405QM224M125(1)H101
P405QM224M125(1)H221
P405QM224M125(1)H331
P405QM224M125(1)H471
P405QM254M125(1)H201
P405QM254M125(1)H351
P405QM254M125(1)H601
P405QP334M125(1)H470
P405CE474M125(1)H220
P405CE474M125(1)H330
P405CE474M125(1)H470
P405CE474M125(1)H680
P405CE474M125(1)H101
P405CE474M125(1)H151
P405CE474M125(1)H221
P405CE474M125(1)H331
P405CJ474M125(1)H471
P405CP474M125(1)H681
P405EE105M125(1)H330
P405CP105M125(1)H470
P405CP105M125(1)H680
P405CP105M125(1)H101
P405CP105M125(1)H151
P405CP105M125(1)H221
PMR205AB6100M033(1)
PMR205AB6100M047(1)
PMR205AB6100M100(1)
PMR205AB6100M220(1)
PMR205AB6150M068(1)
PMR205AB6150M100(1)
PMR205AB6220M047(1)
PMR205AB6220M100(1)
PMR205AB6220M220(1)
PMR205AB6220M330(1)
PMR205AB6220M470(1)
PMR205AB6250M200(1)
PMR205AB6250M350(1)
PMR205AB6250M600(1)
PMR205AB6330M047(1)
PMR205AC6470M022(1)
PMR205AC6470M033(1)
PMR205AC6470M047(1)
PMR205AC6470M068(1)
PMR205AC6470M100(1)
PMR205AC6470M150(1)
PMR205AC6470M220(1)
PMR205AC6470M330(1)
PMR205AC6470M470(1)
PMR205AC6470M680(1)
PMR205AE7100M033(1)
PMR205AC7100M047(1)
PMR205AC7100M068(1)
PMR205AC7100M100(1)
PMR205AC7100M150(1)
PMR205AC7100M220(1)
100
47
100
220
330
470
200
350
600
47
22
33
47
68
100
150
220
330
470
680
33
7.6
7.6
7.6
7.6
9.0
11.3
10.6
11.3
11.3
11.3
11.3
11.3
1.0
47
1.0
68
1.0
1.0
1.0
100
150
220
Capacitance
Value (µF)
New KEMET
Part Number
Lead Spacing (p)
Resistance Ω
B (mm)
H (mm)
L (mm)
Legacy Part Number
(1) Insert lead and packaging code. See Ordering Options Table for available options.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3024_PMR205 • 5/15/2015
4
Film Capacitors
AC Line EMI Suppression and RC Networks – PMR205 Series Metallized Impregnated Paper, 125 VAC/250 VDC
Soldering Process
The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder. This has
increased the liquidus temperature from that of 183ºC for SnPb eutectic alloy to 217 – 221ºC for the new alloys. As a result, the heat stress
to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave temperatures. Polypropylene
capacitors are especially sensitive to heat (the melting point of polypropylene is 160 – 170ºC). Wave soldering can be destructive, especially
for mechanically small polypropylene capacitors (with lead spacing of 5 mm to 15 mm), and great care has to be taken during soldering. The
recommendedꢀsolderꢀprofilesꢀfromꢀKEMETꢀshouldꢀbeꢀused.ꢀPleaseꢀconsultꢀKEMETꢀwithꢀanyꢀquestions.ꢀInꢀgeneral,ꢀtheꢀwaveꢀsolderingꢀcurveꢀ
from IEC Publication 61760-1 Edition 2 serves as a solid guideline for successful soldering. Please see Figure 1.
Reflowꢀsolderingꢀisꢀnotꢀrecommendedꢀforꢀthrough-holeꢀfilmꢀcapacitors.ꢀExposingꢀcapacitorsꢀtoꢀaꢀsolderingꢀprofileꢀinꢀexcessꢀofꢀtheꢀaboveꢀtheꢀ
recommended limits may result to degradation or permanent damage to the capacitors.
Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert through-
holeꢀpartsꢀafterꢀtheꢀcuringꢀofꢀsurfaceꢀmountꢀparts.ꢀConsultꢀKEMETꢀtoꢀdiscussꢀtheꢀactualꢀtemperatureꢀprofileꢀinꢀtheꢀoven,ꢀifꢀthrough-holeꢀ
components must pass through the adhesive curing process. A maximum two soldering cycles is recommended. Please allow time for the
capacitor surface temperature to return to a normal temperature before the second soldering cycle.
Manual Soldering Recommendations
Wave Soldering Recommendations
300
Following is the recommendation for manual
soldering with a soldering iron.
2+3s max
260°C
250
200
150
100
50
Firstwave
Second wave
Recommended Soldering Temperature
ΔT <150°C
Cooling
400
Preheating
ca 2°C/s
350
300
250
200
150
100
50
ca 3.5°C/s typical
ca 5°C/s
115°C max
Tpreheat
100°C
Typical
0
0
40
80
120
160
200
240
Time (s)
0
0
1
2
3
4
5
6
7
8
Soldering time (sec)
The soldering iron tip temperature should be set
atꢀ350°Cꢀ(+10°Cꢀmaximum)ꢀwithꢀtheꢀsolderingꢀ
duration not to exceed more than 3 seconds.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3024_PMR205 • 5/15/2015
5
Film Capacitors
AC Line EMI Suppression and RC Networks – PMR205 Series Metallized Impregnated Paper, 125 VAC/250 VDC
Soldering Process cont'd
Wave Soldering Recommendations cont'd
1. The table indicates the maximum set-up temperature of the soldering process
Figure 1
Maximum
Maximum Preheat
Peak Soldering
Temperature
Temperature
Dielectric
Film Material
Capacitor Capacitor Capacitor Capacitor Capacitor
Pitch
Pitch
Pitch
Pitch
Pitch
≤ꢀ10ꢀmm = 15 mm > 15 mm ≤ꢀ15ꢀmm > 15 mm
Polyester
Polypropylene
Paper
130°C
100°C
130°C
130°C
110°C
130°C
130°C
130°C
140°C
270°C
260°C
270°C
270°C
270°C
270°C
Polyphenylene
Sulphide
150°C
150°C
160°C
270°C
270°C
2. The maximum temperature measured inside the capacitor:
Set the temperature so that inside the element the maximum temperature is below the limit:
Maximum temperature
Dielectric Film Material
measured inside the element
Polyester
Polypropylene
Paper
160°C
110°C
160°C
160°C
Polyphenylene
sulphide
Temperature monitored inside the capacitor.
Selective Soldering Recommendations
Selectiveꢀdipꢀsolderingꢀisꢀaꢀvariationꢀofꢀreflowꢀsoldering.ꢀInꢀthisꢀmethod,ꢀtheꢀprintedꢀcircuitꢀboardꢀwithꢀthrough-holeꢀcomponentsꢀtoꢀbeꢀ
solderedꢀisꢀpreheatedꢀandꢀtransportedꢀoverꢀtheꢀsolderꢀbathꢀasꢀinꢀnormalꢀflowꢀsolderingꢀwithoutꢀtouchingꢀtheꢀsolder.ꢀWhenꢀtheꢀboardꢀisꢀ
over the bath, it is stopped and pre-designed solder pots are lifted from the bath with molten solder only at the places of the selected
components, and pressed against the lower surface of the board to solder the components.
Theꢀtemperatureꢀprofileꢀforꢀselectiveꢀsolderingꢀisꢀsimilarꢀtoꢀtheꢀdoubleꢀwaveꢀflowꢀsolderingꢀoutlinedꢀinꢀthisꢀdocument,ꢀhowever, instead
of two baths, there is only one bath with a time from 3 to 10 seconds. In selective soldering, the risk of overheating is greater than
inꢀdoubleꢀwaveꢀflowꢀsoldering,ꢀandꢀgreatꢀcareꢀmustꢀbeꢀtakenꢀsoꢀthatꢀtheꢀpartsꢀareꢀnotꢀoverheated.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3024_PMR205 • 5/15/2015
6
Film Capacitors
AC Line EMI Suppression and RC Networks – PMR205 Series Metallized Impregnated Paper, 125 VAC/250 VDC
Construction
Detailed Cross Section
R
C
Resistor (Not Shown)
Integrated into Metallization
Self-Extinguishing
Resin
Series Connection
Self-Extinguishing
Metallized Impregnated Paper
Resin
(First Layer)
Metallized Impregnated Paper
(Second Layer)
Margin
Margin
Metal Contact
Layer
Margin
Leads
Metal Contact
Layer
Winding Scheme
Metallized
Impregnated
Paper
1 Section
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3024_PMR205 • 5/15/2015
7
Film Capacitors
AC Line EMI Suppression and RC Networks – PMR205 Series Metallized Impregnated Paper, 125 VAC/250 VDC
Marking
FRONT
BACK
RIFA
Logo
Voltage
IEC Climatic
Category
Dielectric Code
Series
Circuit
Diagram
RC Unit
Manufacturing
Date Code
TOP
Capacitance
Resistance
Packaging Quantities
Lead
Size
Bulk
Short
Leads
500
Bulk
Long
Leads
100
Standard
Thickness Height Length
Spacing
Code
Reel
ø 360 mm
600
(mm)
(mm)
(mm)
(mm)
QE
QM
QP
15.2
15.2
15.2
5.2
7.3
7.8
10.5
13.0
13.5
18.5
18.5
18.5
400
800
400
400
800
400
CE
CJ
CP
EE
20.3
20.3
20.3
25.4
7.6
9.0
14.0
15.0
16.5
16.1
24.0
24.0
24.0
30.5
250
200
150
150
1500
1200
1000
1000
250
250
180
11.3
10.6
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3024_PMR205 • 5/15/2015
8
Film Capacitors
AC Line EMI Suppression and RC Networks – PMR205 Series Metallized Impregnated Paper, 125 VAC/250 VDC
Lead Taping & Packaging (IEC 60286–2)
Lead Spacing 20.3 – 22.5 mm
Lead Spacing 10.2 – 15.2 mm
0
0
Formed Leads from 10.2 to 7.5 mm
0
Taping Specification
Dimensions in mm
Standard IEC 60286–2
Formed
7.5
Lead spacing
+6/-0.1
F
10.2
15.2
20.3
22.5
F
Carrier tape width
Hold-down tape width
Position of sprocket hole
Distance between tapes
Sprocket hole diameter
Feed hole lead spacing
Distance lead – feed hole
Deviation tape – plane
Lateral deviation
+/-0.5
+/-0.3
W
W0
W1
W2
D0
18
18
12
18
12
18
12
18
12
18+1/-0.5
9
9
+/-0.5
9
9
9
9
9+0.75/-0.5
3
Maximum
+/-0.2
3
3
3
3
3
4
4
4
4
4
4
(1)
+/-0.3
P0
P1
12.7(4)
3.75
1.3
2
12.7
7.6
1.3
2
12.7
5.1
1.3
2
12.7
8.9
1.3
2
12.7
5.3
1.3
2
12.7
P1
+/-0.7
Maximum
Maximum
+/-0.2
∆p
∆h
t
1.3
2
Total thickness
0.7
18+2/-0
35
0.7
18+2/-0
35
0.7
18+2/-0
35
0.7
18+2/-0
35
0.9MAX
18.5+/-0.5
58
0.9MAX
18+2/-0
58MAX
(2)
Sprocket hole/cap body
Sprocket hole/top of cap body
Nominal
Maximum
H0
H1(3)
(1) Maximum cumulative feed hole error, 1 mm per 20 parts.
(2) 16.5 mm available on request.
(3) Depending on case size.
(4) 15 mm available on request.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3024_PMR205 • 5/15/2015
9
Film Capacitors
AC Line EMI Suppression and RC Networks – PMR205 Series Metallized Impregnated Paper, 125 VAC/250 VDC
Lead Taping & Packaging (IEC 60286–2) cont'd
Ammo Specifications
Dimensions (mm)
Series
H
W
T
R4x,ꢀR4x+R,ꢀR7x,ꢀRSB
F5A, F5B, F5D
H
360
330
340
330
59
50
F6xx, F8xx
PHExxx, PMExxx, PMRxxx
W
T
Reel Specifications
Dimensions (mm)
Series
D
H
W
R4x,ꢀR4x+R,ꢀR7x,ꢀRSB
F5A, F5B, F5D
F6xx, F8xx
355
500
30
25
55 (Max)
H
D
360
500
PHExxx, PMExxx, PMRxxx
30
46 (Max)
Manufacturing Date Code (IEC–60062)
W
Y = Year, Z = Month
Year
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
Code
M
N
P
R
S
T
U
V
Month
January
February
March
April
May
Code
1
2
3
4
5
6
7
8
9
O
N
D
June
July
August
September
October
November
December
W
X
A
B
C
D
E
F
H
J
K
L
M
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3024_PMR205 • 5/15/2015 10
Film Capacitors
AC Line EMI Suppression and RC Networks – PMR205 Series Metallized Impregnated Paper, 125 VAC/250 VDC
KEMET Corporation
World Headquarters
Europe
Asia
Southern Europe
Sasso Marconi, Italy
Tel: 39-051-939111
Northeast Asia
Hong Kong
Tel: 852-2305-1168
2835 KEMET Way
Simpsonville, SC 29681
Skopje, Macedonia
Tel: 389-2-55-14-623
Shenzhen, China
Tel: 86-755-2518-1306
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
Beijing, China
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Tel: 86-10-5877-1075
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Shanghai, China
Tel: 86-21-6447-0707
Kamen, Germany
Tel: 49-2307-438110
Corporate Offices
Fort Lauderdale, FL
Tel: 954-766-2800
Seoul, South Korea
Tel: 82-2-6294-0550
Northern Europe
Harlow, United Kingdom
Tel: 44-1279-460122
Taipei, Taiwan
Tel: 886-2-27528585
North America
Southeast
Lake Mary, FL
Tel: 407-855-8886
Espoo, Finland
Tel: 358-9-5406-5000
Southeast Asia
Singapore
Tel: 65-6701-8033
Northeast
Wilmington, MA
Tel: 978-658-1663
Penang, Malaysia
Tel: 60-4-6430200
Central
Novi, MI
Tel: 248-306-9353
Bangalore, India
Tel: 91-806-53-76817
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Guadalajara, Jalisco
Tel: 52-33-3123-2141
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3024_PMR205 • 5/15/2015 11
Film Capacitors
AC Line EMI Suppression and RC Networks – PMR205 Series Metallized Impregnated Paper, 125 VAC/250 VDC
Disclaimer
Allꢀproductꢀspeci ꢀcations,ꢀstatements,ꢀinformationꢀandꢀdataꢀ(collectively,ꢀtheꢀ“Information”)ꢀinꢀthisꢀdatasheetꢀareꢀsubjectꢀtoꢀchange.ꢀTheꢀcustomerꢀisꢀresponsibleꢀforꢀcheckingꢀandꢀ
verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
StatementsꢀofꢀsuitabilityꢀforꢀcertainꢀapplicationsꢀareꢀbasedꢀonꢀKEMETꢀElectronicsꢀCorporation’sꢀ(“KEMET”)ꢀknowledgeꢀofꢀtypicalꢀoperatingꢀconditionsꢀforꢀsuchꢀapplications,ꢀbutꢀareꢀ
notꢀintendedꢀtoꢀconstituteꢀ–ꢀandꢀKEMETꢀspeci ꢀcallyꢀdisclaimsꢀ–ꢀanyꢀwarrantyꢀconcerningꢀsuitabilityꢀforꢀaꢀspeci ꢀcꢀcustomerꢀapplicationꢀorꢀuse.ꢀTheꢀInformationꢀisꢀintendedꢀforꢀuseꢀonlyꢀ
by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still
occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective
circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not
be required.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3024_PMR205 • 5/15/2015 12
相关型号：
PMR205AC6470M022R30
RC Network, Isolated, 22ohm, 250V, 0.47uF, Through Hole Mount, 2 Pins, RADIAL LEADED, ROHS COMPLIANT
KEMET
PMR205AC6470M033R30
RC Network, Isolated, 33ohm, 250V, 0.47uF, Through Hole Mount, 2 Pins, RADIAL LEADED, ROHS COMPLIANT
KEMET
PMR205AC6470M100R30
RC Network, Isolated, 100ohm, 250V, 0.47uF, Through Hole Mount, 2 Pins, RADIAL LEADED, ROHS COMPLIANT
KEMET
PMR205AC6470M150R30
RC Network, Isolated, 150ohm, 250V, 0.47uF, Through Hole Mount, 2 Pins, RADIAL LEADED, ROHS COMPLIANT
KEMET
PMR205AC6470M220R30
RC Network, Isolated, 220ohm, 250V, 0.47uF, Through Hole Mount, 2 Pins, RADIAL LEADED, ROHS COMPLIANT
KEMET
PMR205AC6470M470R30
RC Network, Isolated, 470ohm, 250V, 0.47uF, Through Hole Mount, 2 Pins, RADIAL LEADED, ROHS COMPLIANT
KEMET
PMR205AC6470M680R30
RC Network, Isolated, 680ohm, 250V, 0.47uF, Through Hole Mount, 2 Pins, RADIAL LEADED, ROHS COMPLIANT
KEMET
PMR205AC7100M047R30
RC Network, Isolated, 33ohm, 250V, 1uF, Through Hole Mount, 2 Pins, RADIAL LEADED, ROHS COMPLIANT
KEMET
PMR205AC7100M068R30
RC Network, Isolated, 68ohm, 250V, 1uF, Through Hole Mount, 2 Pins, RADIAL LEADED, ROHS COMPLIANT
KEMET
PMR205AC7100M100R30
RC Network, Isolated, 68ohm, 250V, 1uF, Through Hole Mount, 2 Pins, RADIAL LEADED, ROHS COMPLIANT
KEMET
©2020 ICPDF网 联系我们和版权申明