C44ALGR6100AASJ_技术文档

Aluminum Can Power Film Capacitors

C44P/C20A Series, 330 – 1,000 VAC, 700 – 2,300 VDC,

for PFC and AC Filter

Overview

Applications

The C44P/C20A Series are a polypropylene metallized ﬁlm

with cylindrical aluminium can type ﬁlled with oil, screw

terminals, plastic insulator and overpressure safety device.

Typical applications include commutation, power factor

correction and AC harmonic ﬁltering.

Beneﬁts

• Overpressure safety device

• High peak current capability

• High torque screw terminals with plastic insulator

• Long lifetime

• Self-healing

Part Number System

C

44

P

L

G

R

6

1

0

A

S

J

Rated Voltage

(VAC)

Case Terminal

Internal

Code

Internal

Codes

Series

Application

Capacitance Code (pF)

Tolerance

Type

Style

MKP

44 = 330 – AC Filter For

P = C44

20 = 550 – A = C20

Applications 1,000 VAC

For

G =

M12

bolt

R =

Male

M10

Digits 9 – 11 indicate the

A =

J = 5%

K = 10%

Capacitors 440 VAC

for Power

C44P:

C20A:

L = 330 K = 550

K = 440 L = 640

Q = 780

ﬁrst 3 digits of capacitance Standard

value. Digit 8 indicates the Z =

number of zeros that must Special

be added to obtain rated

Z = 1000

capacitance in pF.

It is not possible to manufacture every part number which could be created from coding description. Please refer to table of standard part numbers and

ask KEMET for other possibilities.

One world. One KEMET

F3050_C44P_RADIAL • 9/20/2016

1

Power and AC Film Capacitors – Aluminum Can Power Film Capacitors

C44P/C20A Series, 250 – 1,000 VAC, 400 – 1,400 VDC, for PFC and AC Filter

Dimensions – Millimeters

Diameter

P

W

W1

M1

H1

Ø = 65

28

18

40

12

16

Ø ≥ 75

35

21

45

12

16

All dimensions are in mm

Maximum Driving Torque

Terminals M10

10 [N*m]

Bolt M12

12 [N*m]

F3050_C44P_RADIAL • 9/20/2016

2

Power and AC Film Capacitors – Aluminum Can Power Film Capacitors

C44P/C20A Series, 250 – 1,000 VAC, 400 – 1,400 VDC, for PFC and AC Filter

General Technical Data

IEC 61071

Reference Standards

UL810 approved

Polypropylene ﬁlm

Dielectric

Non-inductive type winding

Climatic Category

Maximum hot spot temperature

Endurance Test IEC 61071

Installation

25/70/56 – IEC 60068-1

+80°C

+70°C @ Case Temperature

Whatever position

Tinned brass deck with self estinguish UL94 V0 plastic insulators

Electrical Characteristics

Rated Voltage

Urms = (see table) VAC

Us = (see table) VDC

±5% or ±10%

Surge Voltage

Capacitance Tolerance

Dissipation Factor PP typical

≤ 0.0002 at 25°C

(tgδ0)

Annual average ≤ 80% at 24°C

On 30 days/year permanently 100%. on other days occasionally

90%.

Relative Humidity

Dewing not admitted

Capacitance deviation in

temperature range (-40 +50°C)

±1.5% maximum on capacitance value at 20°C

Life Expectancy

Capacitance drop at end of life

Failure Rate IEC 61709

100,000 hours @ V_RMSwith T_HS≤ 75°C

- 5% (typical)

See FIT Graph

Test Methods

Test voltage term to term (Utt)

Test voltage term to case (Utc)

1.5 x V_RMSfor 10 seconds at 25°C

3,600 V ~ 50 Hz for 10 seconds (C44P)

6,000 V ~ 50 Hz for 10 seconds (C20A)

IEC 60068-2-78

Damp Heat

Change of Temperature

Vibration Strength

IEC 60068-2-14

IEC 60068-2-6

NOTICE: Care should be taken to ensure that there still is electrical clearance of 15 mm between terminations and other live or earthed parts above the

capacitor, in case of safety device activation.

F3050_C44P_RADIAL • 9/20/2016

3

Power and AC Film Capacitors – Aluminum Can Power Film Capacitors

C44P/C20A Series, 250 – 1,000 VAC, 400 – 1,400 VDC, for PFC and AC Filter

Table 1 – Ratings & Part Number Reference

Maximum

Dimensions

(mm)

Rated

Voltage

Surge

Voltage

Ripple

Current

V_rms

ESR

ESL

Thermal Res

(°C/W)

Cap

Value

(µF)

dV/dt

(V/µs)

Part Number

10 kHz

(mΩ)

VAC

VDC

D

H

(nH)

40°C (A)¹

100

200

300

400

500

600

100

120

133

150

200

250

300

400

22

33

47

68

100

120

150

15

22

33

47

68

100

120

150

10

15

22

33

47

68

100

15

20

22

33

47

68

330

440

550

640

780

1000

700

1050

1500

1900

2100

2500

3300

65

75

65

75

85

75

65

75

65

75

85

95

65

75

65

75

85

95

65

75

65

75

95

116

65

75

85

75

85

95

75

85

95

117

147

247

197

247

197

247

280

147

197

247

197

247

117

197

247

117

147

247

117

147

247

147

140

147

247

25

43

50

55

58

63

65

75

30

50

40

50

45

55

60

65

40

45

50

55

60

35

40

55

60

30

35

40

50

55

60

33

40

35

40

45

55

3.0

2.8

2.3

1.4

2.0

1.8

1.2

1.6

1.1

3.5

2.3

1.8

3.0

1.6

2.8

2.4

2.0

1.9

1.7

2.1

1.6

1.4

1.7

1.4

1.3

1.2

2.5

3.0

2.2

1.9

1.6

1.3

1.2

3.0

3.6

2.7

2.0

1.8

1.5

1.3

2.5

2.1

2.0

1.7

1.4

1.2

115

140

150

160

170

160

180

210

145

135

165

155

170

160

175

180

200

125

130

135

145

160

165

180

120

125

135

145

160

170

175

180

130

135

140

150

160

170

180

150

155

165

170

180

8.5

5.4

3.6

4.2

3.1

2.9

3.4

2.9

2.4

5.6

4.4

4.2

3.7

4.0

3.5

3.2

3.4

2.7

2.5

13.3

10.6

7.8

6.2

5.2

4.6

4.4

14.1

10.9

9.1

6.3

5.3

4.4

4.1

3.8

14.1

10.1

8.9

7.6

12.5

20

30

C44PLGR6100AASJ

C44PLGR6200ZASJ

C44PLGR6300ZASJ

C44PLGR6300AASJ

C44PLGR6400ZASJ

C44PLGR6500ZASJ

C44PLGR6500ZBSJ

C44PLGR6600AASJ

C44PLGR6600ZASJ

C44PKGR6100AASJ

C44PKGR6100ZASJ

C44PKGR6120AASJ

C44PKGR6133AASJ

C44PKGR6133ZASJ

C44PKGR6150AASJ

C44PKGR6200AASJ

C44PKGR6250AASJ

C44PKGR6300AASJ

C44PKGR6400AASK

C20AKGR5220AASK

C20AKGR5330AASK

C20AKGR5470AASK

C20AKGR5680AASK

C20AKGR6100AASK

C20AKGR6120AASK

C20AKGR6150AASK

C20ALGR5150AASK

C20ALGR5220AASK

C20ALGR5330AASK

C20ALGR5470AASK

C20ALGR5680AASK

C20ALGR6100AASK

C20ALGR6120AASK

C20ALGR6150AASK

C20AQGR5100AASK

C20AQGR5150AASK

C20AQGR5220AASK

C20AQGR5330AASK

C20AQGR5470AASK

C20AQGR5680AASK

C20AQGR6100AASK

C20AZGR5150AASK

C20AZGR5200ZBSK

C20AZGR5220AASK

C20AZGR5330AASK

C20AZGR5470AASK

C20AZGR5680AASK

1000

1280

1400

1700

2300

70

85

5.2

4.5

4.0

9.2

8.3

8.0

5.3

4.7

4.1

85

Cap

Value

Rated

Voltage

Surge

Voltage

Ripple

Current

dV/dt

(V/µs)

VAC

D

H

ESR

ESL

Thermal Res

Part Number

¹Maximum admissible RMS current T_HS≤ 75°C.

F3050_C44P_RADIAL • 9/20/2016

4

Power and AC Film Capacitors – Aluminum Can Power Film Capacitors

C44P/C20A Series, 250 – 1,000 VAC, 400 – 1,400 VDC, for PFC and AC Filter

Lifetime Expectancy/Failure Quota Graphs

Power Losses and Hot Spot Temperature Calculation

At each frequency, the Power Losses are the sum of:

1. Dielectric Power Losses

Hot Spot

Temperature °C

Lifetime curve C44P-C20 series

1.40

P_D(f_i) = 2 * π * f_i* C * V(f_i)²* tgδ₀

1.30

1.20

1.10

1.00

0.90

0.80

0.70

0.60

≤60°C

70°C

75°C

80°C

which can be alternatively calculated as

I(f_i)²

P_D(f_i) =

* tgδ₀

2 * π * f_i* C

where: tgδ₀= 2 * 10^-4

2. Joule Power Losses:

P_J(f_i) = Rs * I(f_i)²

100

1,000

10,000

100,000

1,000,000

Lifetime Expectancy [h]

The Total Power Losses are the sum of the components at each frequency:

P =

T

[

P

(

f_i

)

+ P

f_i

( )

]

∑

D

J

i

The Thermal Jump in the Hot Spot is:

ΔT_HS= P_T* R_th-hs

V = Operating Voltage [VAC]

V

_rms= Rated Voltage [VAC]

The Hot Spot Temperature is:

T

_HS= T_a+ ΔT_HS

Hot Spot

Temperature °C

FIT @ Hot Spot Temperatures

Limits for the formulas

80

75

70

≤60

The limits listed below should not be exceeded:

1.

1,000

V ( f )²≤V

∑

i

RMS

i

100

10

1

2.

I( f )²≤ I

∑

i

T

_HS=T_a+ ΔT_HS≤ (T_HS)

MAX

Where T_ais the ambient temperature (steady state temperature of the

cooling air ﬂowing around the capacitor, measured at 100 mm of distance

from the capacitor and at a height of 2/3 height of the capacitor).

0.6

0.7

0.8

0.9

1

1.1

Voltage Ratio V/V_rms

3. Maximum case temperature (T_CASE) ≤ 70°C

I_RMS= √(13.8²+ 27²) = 30 ≤ 30 → Admitted

V

Example of calculation

Part Number: C44PKGR6100AASJ

_RMS= √(440²+ 6.1²) = 440 ≤ 440 → Admitted

P_D(50) = 2 * π * 50 * 100 * 10^-6* 440²* 2 * 10^-4= 1.22 [W]

P_D(7000) = [27²/(2 * π * 7000 * 100 * 10^-6)] * 2 * 10^-4= 0.03 [W]

P_J(50) = 3.5 * 10^-3* [(2 *π * 50 * 100 * 10^-6* 440)²] = 0.67 [W]

P_J(7000) = 3.5 * 10^-3* 27²= 2.55 [W]

Rated V_RMS= 440 [V_RMS

Rated I_RMS= 30 [A]

R_s= 3.5 [mΩ]

]

R_th= 5.6 [°C/W]

P_T= 1.22 + 0.03 + 0.67 + 2.55 = 4.47 [W]

ΔT_HS= 5.6 * 4.47 = 25 [°C]

T_HS= Ta + ΔT_HS

T_HS= 35 + 25 = 60 [°C] →OK since hot spot temperature is less

than maximum admitted

Expected Life @ T_HS= 75°C → 100,000 hours (see lifetime curve)

Expected Life @ T_HS= 60°C → 140,000 hours (see lifetime curve)

Fundamental Frequency F₁= 50 [Hz]

Ripple Frequency F₂= 7000 [Hz]

Fundamental Voltage V₁= 440 [V~]

Ripple Current I₂= 27 [A]

T_a= 35°C

I₁= I(50) = 2 * π * 50 * 100 * 10^-6* 440 = 13.8 [A]

V₂= V(7000) = [27/(2 * π * 7000 * 100 * 10^-6)] = 6.14 [V]

F3050_C44P_RADIAL • 9/20/2016

5

Power and AC Film Capacitors – Aluminum Can Power Film Capacitors

C44P/C20A Series, 250 – 1,000 VAC, 400 – 1,400 VDC, for PFC and AC Filter

Marking

Dissipation Factor

Dissipation factor is a complex function involved with the inefﬁciency of the capacitor. The tgδ may change up and down

with increased temperature. For more information, please refer to Performance Characteristics.

Sealing

Hermetically Sealed Capacitors

When the temperature increases, the pressure inside the capacitor increases. If the internal pressure is high enough, it can

cause a breach in the capacitor which can result in leakage, impregnation, ﬁlling ﬂuid or moisture susceptibility.

Resin Encased/Wrap & Fill Capacitors

The resin seals on resin encased and wrap and ﬁll capacitors will withstand short-term exposure to high humidity

environments without degradation. Resins and plastic tapes will form a pseudo-impervious barrier to humidity and

chemicals. These case materials are somewhat porous and through osmosis can cause contaminants to enter the capacitor.

The second area of contaminated absorption is the lead-wire/resin interface. Since resins cannot bond 100% to tinned wires,

there can be a path formed up to the lead wire into the capacitor section. Aqueous cleaning of circuit boards can aggravate

this condition.

Barometric Pressure

The altitude at which hermetically sealed capacitors are operated controls the voltage rating of the capacitor. As the

barometric pressure decreases, the susceptibility to terminal arc-over increases. Non-hermetic capacitors can be affected

by internal stresses due to pressure changes. This can be in the form of capacitance changes or dielectric arc-over as well

as low insulation resistance. Heat transfer can also be affected by altitude operation. Heat generated in operation cannot be

dissipated properly and can result in high RI2 losses and eventual failure.

Radiation

Radiation capabilities of capacitors must be taken into consideration. Electrical degradation in the form of dielectric

embitterment can take place causing shorts or opens.

F3050_C44P_RADIAL • 9/20/2016

6

Power and AC Film Capacitors – Aluminum Can Power Film Capacitors

C44P/C20A Series, 250 – 1,000 VAC, 400 – 1,400 VDC, for PFC and AC Filter

Environmental Compliance

As an environmentally conscious company, KEMET is working continuously with improvements concerning the environmental

effects of both our capacitors and their production.

In Europe (RoHS Directive) and in some other geographical areas like China, legislation has been put in place to prevent the

use of some hazardous materials, like Lead (Pb), in electronic equipment. All products in this catalog are produced to help

our customers' obligations to guarantee their products to fulﬁll these legislative requirements. The only material of concern

in our products has been Lead (Pb), which has been removed from all designs to fulﬁll the requirement of containing less

than 0.1% of Lead in any homogeneous material.

KEMET will closely follow any changes in legislation world wide and makes any necessary changes in its products, whenever

needed.

Some customer segments like Medical, Military and Automotive Electronics may still require the use of Lead in electrode

coatings. To clarify the situation and distinguish products from each other, a special symbol is used on the packaging labels

for RoHS compatible capacitors.

Because of customer requirements there may appear additional markings like LF = Lead Free or LFW = Lead Free Wires on

the label.

All KEMET power ﬁlm products are RoHS Compliant.

Materials & Environment

The selection of materials used by KEMET for the production of capacitors is the result of extensive experience and

constant attention to environmental protection. KEMET selects its suppliers according to ISO 9001 standards and carries out

statistical analysis on the materials purchased before acceptance. All materials are, to the company's present knowledge,

non-toxic and free from Cadmium, Mercury, Chrome and compounds, PCB (Polychlorine Triphenyl), Bromide and Chlorine

Dioxins Bromurate Clorurate, CFC and HCFC and Asbestos.

Green Products

All KEMET power ﬁlm products are ROHS Compliant.

Insulation Resistance

When the capacitor temperature increases, the insulation resistance decreases. This is due to increased electron activity.

Low insulation resistance can also be the result of moisture trapped in the windings, caused by a prolonged exposure to

excessive humidity.

F3050_C44P_RADIAL • 9/20/2016

7

Power and AC Film Capacitors – Aluminum Can Power Film Capacitors

C44P/C20A Series, 250 – 1,000 VAC, 400 – 1,400 VDC, for PFC and AC Filter

KEMET Electronic Corporation Sales Ofﬁces

For a complete list of our global sales ofﬁces, please visit www.kemet.com/sales.

Disclaimer

All product speciﬁcations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for

checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.

All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.

Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such

applications, but are not intended to constitute – and KEMET speciﬁcally disclaims – any warranty concerning suitability for a speciﬁc customer application or use.

The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any

technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no

obligation or liability for the advice given or results obtained.

Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component

failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards

(such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or

property damage.

Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other

measures may not be required.

Prototype Sample Disclaimer

The Customer acknowledges the following limitations of the prototype samples:

(1) Prototype samples are manufactured from preliminary designs and manufacturing processes; may not represent ﬁnal designs; have not been

released for commercial use and are not subject to the same quality control procedures applicable to released products.

(2) Prototype samples are not qualiﬁed parts and are provided “as-is” by KEMET Electronics Corporation, which speciﬁcally disclaims any and all

warranties and guarantees, explicit or implied, including, without limitation, the warranties of merchantability and ﬁtness for a particular purpose or use.

(3) Prototype samples are not intended for commercial use; are provided for engineering evaluation only and are not recommended for use in the

Customer’s production line.

(4) The Customer assumes the risk ofany and alluses that the Customer makes of the prototype samples.

General Disclaimer

“All product speciﬁcations, statements, information and data given herein are believed to be accurate and reliable, but are presented without guarantee,

warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on our knowledge of typical

operating conditions for such applications, but are not intended to constitute – and we speciﬁcally disclaim – any warranty concerning suitability for

a speciﬁc customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to

determine the correct products for their application.

KEMET’s product warranty is set forth at www.kemet.com under Terms and Conditions of Sale.”

KEMET is a registered trademark of KEMET Electronics Corporation.

F3050_C44P_RADIAL • 9/20/2016

8


型号：	C44ALGR6100AASJ
厂家：	KEMET CORPORATION
描述：	C44P/C20A Series, 330 - 1,000 VAC, 700 - 2,300 VDC, for PFC and AC Filter 功率因数校正
文件：	总8页 (文件大小：486K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

C44ALGR6100AASJ [KEMET]

相关型号：

C44ALGR6100AASK

C44ALGR6100ZASJ

C44ALGR6100ZASK

C44AMFP4500ZA0J

C44AMFP5100ZD0J

C44AMGP5220ZA0J

C44AMGP5220ZA0K

C44AMGP5300ZA0J

C44APFP4150ZA0J

C44APFP4150ZA0K

C44APFP4200ZD0J

C44APFP4300ZB0J