C1206X102JDGACTU [KEMET]
Ceramic Capacitor, Multilayer, Ceramic, 1000V, C0G, -/+30ppm/Cel TC, 0.001uF, 1306;型号: | C1206X102JDGACTU |
厂家: | KEMET CORPORATION |
描述: | Ceramic Capacitor, Multilayer, Ceramic, 1000V, C0G, -/+30ppm/Cel TC, 0.001uF, 1306 电容器 |
文件: | 总22页 (文件大小:1441K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage with Flexible Termination System (HV FT-CAP),
C0G Dielectric, 500 – 3,000 VDC (Commercial Grade)
Overview
KEMET’s High Voltage with Flexible Termination (HV FT-CAP)
surface mount MLCCs in C0G dielectric address the primary
failure mode of MLCCs–flex cracks, which are typically the
result of excessive tensile and shear stresses produced
during board flexure and thermal cycling. Featuring several
of the highest CV (capacitance/voltage) values available in
the industry, these devices utilize a pliable and conductive
silver epoxy between the base metal and nickel barrier layers
of the termination system. The addition of this epoxy layer
inhibits the transfer of board stress to the rigid ceramic
body, therefore mitigating flex cracks which can result in
low IR or short circuit failures. Although flexible termination
technology does not eliminate the potential for mechanical
damage that may propagate during extreme environmental
and handling conditions, it does provide superior flex
performance over standard termination systems.
These devices exhibit low ESR at high frequencies and find
conventional use as snubbers or filters in applications such as
switching power supplies and lighting ballasts. Their exceptional
performance at high frequencies has made high voltage
MLCC’s the preferred dielectric choice of design engineers
worldwide. In addition to their use in power supplies, these
capacitors are widely used in industries related to automotive
(hybrid), telecommunications, medical, military, aerospace,
semiconductors and test/diagnostic equipment.
In addition to Commercial Grade, Automotive Grade devices are
available which meet the demanding Automotive Electronics
Council’s AEC-Q200 qualification requirements.
KEMET’s high voltage surface mount MLCCs in C0G
dielectric feature a 125°C maximum operating temperature
and offer the most stable voltage and temperature
performance of all ceramic dielectric materials. C0G (NP0)
dielectric capacitors exhibit no change in capacitance with
respect to time and voltage and boasts a negligible change
in capacitance with reference to ambient temperature.
Capacitance change is limited to ±30ppm/ºC from −55°C to
+125°C.
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
Ordering Information
C
2225
X
393
J
C
G
A
C
TU
Rated
Failure
Capacitance
Tolerance1
Case Size Specification/ Capacitance
Packaging/Grade
(C-Spec)
Ceramic
Voltage Dielectric Rate/
Termination Finish2
(L" x W")
Series
Code (pF)
(VDC)
Design
0603
0805
1206
1210
1808
1812
1825
2220
2225
X= Flexible Two significant B = ±0.10 pF C = 500
G =
C0G
A =
N/A
C = 100% Matte Sn
L = SnPb (5% Pb minimum)
See
Termination
digits and
number of
zeros.
C = ±0.25 pF B = 630
“Packaging
C-Spec Ordering
Options Table”
below
D = ±0.5 pF
F = ±1%
G = ±2%
D = 1,000
F = 1,500
G = 2,000
Z = 2,500
H = 3,000
J = ±5%
K = ±10%
M = ±20%
1 Additional capacitance tolerance offerings may be available. Contact KEMET for details.
2 Additional termination finish options may be available. Contact KEMET for details.
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1070_C0G_HV_FT-CAP_SMD • 6/27/2017
1
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 – 3,000 VDC (Commercial Grade)
Packaging C-Spec Ordering Options Table
Packaging/Grade
Packaging Type1
Ordering Code (C-Spec)
Commercial Grade1
Bulk Bag
Not required (Blank)
TU
7" Reel/Unmarked
7411 (EIA 0603 and smaller case sizes)
7210 (EIA 0805 and larger case sizes)
13" Reel/Unmarked
7" Reel/Unmarked/2mm pitch2
13" Reel/Unmarked/2mm pitch2
7081
7082
Automotive Grade3
7" Reel
AUTO
AUTO7411 (EIA 0603 and smaller case sizes)
AUTO7210 (EIA 0805 and larger case sizes)
13" Reel/Unmarked
7" Reel/Unmarked/2mm pitch2
13" Reel/Unmarked/2mm pitch2
3190
3191
1 Default packaging is “Bulk Bag”. An ordering code C-Spec is not required for “Bulk Bag” packaging.
1 The terms “Marked” and “Unmarked” pertain to laser marking option of capacitors. All packaging options labeled as “Unmarked” will contain
capacitors that have not been laser marked. The option to laser mark is not available on these devices. For more information see “Capacitor Marking”.
2 The 2mm pitch option allows for double the packaging quantity of capacitors on a given reel size. This option is limited to EIA 0603 (1608 metric) case
size devices. For more information regarding 2mm pitch option see “Tape & Reel Packaging Information”.
3 Reeling tape options (Paper or Plastic) are dependent on capacitor case size (L” x W”) and thickness dimension. See “Chip Thickness/Tape & Reel
Packaging Quantities” and “Tape & Reel Packaging Information”.
3 For additional Information regarding “AUTO” C-Spec options, see “Automotive C-Spec Information”.
3 All Automotive packaging C-Specs listed exclude the option to laser mark components. The option to laser mark is not available on these devices. For
more information see “Capacitor Marking”.
Benefits
• −55°C to +125°C operating temperature range
• Superior flex performance (up to 5 mm)
• Lead (Pb)-Free, RoHS and REACH compliant
• EIA 0603, 0805, 1206, 1210, 1808, 1812, 1825, 2220
and 2225 case sizes
• Preferred capacitance solution at line frequencies
and into the MHz range
• No capacitance change with respect to applied
rated DC voltage
• Negligible capacitance change with respect to
temperature from −55°C to +125°C
• No capacitance decay with time
• DC voltage ratings of 500 V, 630 V, 1 KV, 1.5 KV, 2 KV,
2.5 KV and 3 KV
• Capacitance offerings ranging from 1 pF to 39 nF
• Available capacitance tolerances of ±0.10 pF, ±0.25 pF,
±0.5 pF, ±1%, ±2%, ±5%, ±10% and ±20%
• No piezoelectric noise
• Non-polar device, minimizing installation concerns
• Automotive (AEC–Q200) grade available
• 100% pure matte tin-plated termination finish
allowing for excellent solderability
• Extremely low ESR and ESL
• High thermal stability
• SnPb plated termination finish option available
upon request (5% Pb minimum)
• High ripple current capability
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1070_C0G_HV_FT-CAP_SMD • 6/27/2017
2
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 – 3,000 VDC (Commercial Grade)
Applications
Typical applications include switch mode power supplies (input filters, resonators, tank circuits, snubbed circuits, output
filters), high voltage coupling and DC blocking, lighting ballasts, voltage multiplier circuits, DC/DC converters and coupling
capacitors in Ćuk converters. Markets include power supply, LCD fluorescent backlight ballasts, HID lighting, telecom
equipment, industrial and medical equipment/control, LAN/WAN interface, analog and digital modems, and automotive.
Dimensions – Millimeters (Inches)
L
ꢁ
T
ꢀ
S
S
EIA Size
Code
Metric Size
Code
L
W
Width
T
B
Mounting
Technique
Separation
Minimum
Length
Thickness
Bandwidth
1.60 (0.063)
±0.15 (0.006)
2.00 (0.079)
±0.30 (0.012)
3.30 (0.130)
±0.40 (0.016)
3.30 (0.130)
±0.40 (0.016)
4.70 (0.185)
±0.50 (0.020)
4.50 (0.178)
±0.40 (0.016)
4.60 (0.181)
±0.40 (0.016)
5.90 (0.232)
±0.75 (0.030)
5.90 (0.232)
±0.75 (0.030)
0.80 (0.032)
±0.15 (0.006)
1.25 (0.049)
±0.30 (0.012)
1.60 (0.063)
±0.35 (0.013)
2.60 (0.102)
±0.30 (0.012)
2.00 (0.079)
±0.20 (0.008)
3.20 (0.126)
±0.30 (0.012)
6.40 (0.252)
±0.40 (0.016)
5.00 (0.197)
±0.40 (0.016)
0.35 (0.014)
±0.15 (0.006)
0.50 (0.02)
±0.25 (0.010)
0.60 (0.024)
±0.25 (0.010)
0.60 (0.024)
±0.25 (0.010)
0.70 (0.028)
±0.35 (0.014)
0.70 (0.028)
±0.35 (0.014)
0.70 (0.028)
±0.35 (0.014)
0.70 (0.028)
±0.35 (0.014)
0.70 (0.028)
±0.35 (0.014)
0603
0805
1206
1210
1808
1812
1825
2220
2225
1608
2012
3216
3225
4520
4532
4564
5650
5664
0.70 (0.028)
Solder Wave or
Solder Reflow
0.75 (0.030)
See Table 2 for
Thickness
N/A
Solder Reflow
Only
6.40 (0.248)
±0.40 (0.016)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1070_C0G_HV_FT-CAP_SMD • 6/27/2017
3
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 – 3,000 VDC (Commercial Grade)
Qualification/Certification
Commercial Grade products are subject to internal qualification. Details regarding test methods and conditions are
referenced in Table 4, Performance and Reliability.
Environmental Compliance
Lead (Pb)-free, RoHS, and REACH compliant without exemptions (excluding SnPb termination finish option).
Electrical Parameters/Characteristics
Item
Parameters/Characteristics
Operating Temperature Range
−55°C to +125°C
±30 ppm/ºC
0%
Capacitance Change with Reference to
+25°C and 0 VDC Applied (TCC)
Aging Rate (Maximum % Capacitance Loss/Decade Hour)
1Dielectric Withstanding Voltage (DWV)
See Dielectric Withstanding Voltage (DWV) Table
(5 ±1 seconds and charge/discharge not exceeding 50 mA)
2Dissipation Factor (DF) Maximum Limit at 25ºC
3Insulation Resistance (IR) Limit at 25°C
0.1%
1,000 megohm microfarads or 100 GΩ
(500 VDC applied for 120 ±5 seconds at 25°C)
1 DWV is the voltage a capacitor can withstand (survive) for a short period of time. It exceeds the nominal and continuous working voltage of the
capacitor.
2 Capacitance and dissipation factor (DF) measured under the following conditions:
1 MHz ±100 kHz and 1.0 Vrms ±0.2 V if capacitance ≤ 1,000 pF
1 kHz ±50 Hz and 1.0 Vrms ±0.2 V if capacitance > 1,000 pF
3 To obtain IR limit, divide MΩ-µF value by the capacitance and compare to GΩ limit. Select the lower of the two limits.
Note: When measuring capacitance it is important to ensure the set voltage level is held constant. The HP4284 and Agilent E4980 have a feature known
as Automatic Level Control (ALC). The ALC feature should be switched to “ON.”
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1070_C0G_HV_FT-CAP_SMD • 6/27/2017
4
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 – 3,000 VDC (Commercial Grade)
Dielectric Withstanding Voltage (DWV)
EIA Case Size
500V
630V
≥ 1000V
0603
130% of rated voltage
< 620pF 150% of rated voltage
≥ 620pF 130% of rated voltage
< 5.1nF 150% of rated voltage
≥ 5.1nF 130% of rated voltage
< 7.5nF 150% of rated voltage
≥ 7.5nF 130% of rated voltage
< 5.1nF 150% of rated voltage
≥ 5.1nF 130% of rated voltage
< 12nF 150% of rated voltage
≥ 12nF 130% of rated voltage
0805
1206
1210
1808
1812
≥1825
150% of rated
voltage
120% of rated
voltage
150% of rated voltage
Post Environmental Limits
High Temperature Life, Biased Humidity, Moisture Resistance
Rated DC
Voltage
Capacitance Dissipation Factor Capacitance
Insulation
Dielectric
C0G
Value
(Maximum %)
Shift
Resistance
10% of Initial
Limit
All
All
0.5
0.3% or ±0.25 pF
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1070_C0G_HV_FT-CAP_SMD • 6/27/2017
5
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 – 3,000 VDC (Commercial Grade)
Table 1A – Capacitance Range/Selection Waterfall (0603 – 1808 Case Sizes)
Case Size/Series
C0603X C0805X
C1206X
C1210X
C1808X
Voltage Code
C
B
D
C
B
D
C
B
D
F
G
C
B
D
F
G
C
B
D
F
G
Z
H
Cap
Capacitance
Rated Voltage (VDC)
Code
Product Availability and Chip Thickness Codes
See Table 2 for Chip Thickness Dimensions
Capacitance Tolerance
1.0 - 9.1 pF*
10 pF
11 pF
12 pF
13 pF
15 pF
16 pF
18 pF
20 pF
22 pF
24 pF
27 pF
30 pF
33 pF
36 pF
39 pF
43 pF
47 pF
51 pF
56 pF
62 pF
68 pF
75 pF
82 pF
91 pF
100 pF
110 pF
120 pF
130 pF
150 pF
160 pF
180 pF
200 pF
220 pF
240 pF
270 pF
300 pF
330 pF
360 pF
390 pF
430 pF
470 pF
510 pF
560 pF
620 pF
680 pF
750 pF
820 pF
910 pF
1,000 pF
109 - 169*
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
101
111
121
131
151
161
181
201
221
241
271
301
331
361
391
431
471
511
561
621
681
751
821
911
102
B
C
D
DG DG DG
LB LB LB LB LB LB LB
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
DG DG DG ES ES ES ES ES FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG ES ES ES ES ES FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG ES ES ES ES ES FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG ES ES ES ES ES FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG ES ES ES ES ES FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG ES ES ES ES ES FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG ES ES ES ES ES FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG ES ES ES ES ES FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG ES ES ES ES ES FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG ES ES ES ES ES FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG ES ES ES ES ES FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG ES ES ES ES ES FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG ES ES ES ES ES FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG ES ES ES ES ES FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG ES ES ES ES ES FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG ES ES ES ES ES FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG ES ES ES ES ES FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG ES ES ES ES ES FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG ES ES ES ES ES FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG ES ES ES ES ES FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG ES ES ES ES ES FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG ES ES ES ES EF FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG ES ES ES ES EF FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG ES ES ES ES EF FM FM FM FM FM LB LB LB LB LB LB LB
CJ CJ CJ DG DG DG ES ES ES ES EF FM FM FM FM FM LB LB LB LB LB LC LB
CJ CJ CJ DG DG DG ES ES ES ES EU FM FM FM FM FM LB LB LB LB LB LC LB
CJ CJ CJ DG DG DG ES ES ES ES EU FZ FZ FZ FM FM LA LA LA LA LB LC LB
CJ CJ CJ DG DG DG ES ES ES ES EU FZ FZ FZ FM FM LA LA LA LA LB LC LC
CJ CJ CJ DG DG DG ES ES ES EF EU FZ FZ FZ FM FM LA LA LA LA LB LC LC
CJ CJ CJ DG DG DG ES ES ES EF EU FZ FZ FZ FM FM LA LA LA LA LC LC LC
CJ CJ CJ DG DG DG ES ES ES EF EU FZ FZ FZ FM FM LA LA LA LA LC LC LC
CJ CJ CJ DG DG DG ES ES ES EF EU FZ FZ FZ FM FM LA LA LA LA LC LC
CJ CJ CJ DG DG DG ES ES ES EU EU FZ FZ FZ FM FM LA LA LA LA LC LC
CJ CJ
CJ CJ
CJ CJ
CJ CJ
CJ CJ
CJ CJ
CJ CJ
CJ CJ
CJ CJ
CJ CJ
CJ CJ
CJ CJ
DG DG DG ES ES ES EU EU FZ FZ FZ FM FM LA LA LA LB LC LC
DG DG DG ES ES ES EU EU FZ FZ FZ FK FK LA LA LA LB LC LC
DG DG DC ES ES EF EU
DG DG DC ES ES EF EU
DG DG DC ES ES EF EU
DG DG DC ES ES EF EU
DG DG DD ES ES EF EU
DG DG DD ES ES EU EU
DG DG DD ES ES EU EU
DG DG DG ES ES EU EU
DG DG DG ES ES EU
FZ FZ FZ FK FK LA LA LA LB LC LC
FZ FZ FZ FK FK LA LA LA LB LC LC
FZ FZ FZ FK FS LA LA LA LB LA LC
FZ FZ FZ FK FS LA LA LA LB LA LC
FZ FM FM FS FS LA LB LB LC LA
FZ FM FM FS FS LA LB LB LC LA
FZ FM FM FS FS LA LB LB LC LB
FZ FM FM FS FS LA LB LB LC LB
FZ FM FM FS FS LA LB LB LA LC
FZ FM FM FS FS LB LB LB LA LC
DG DG DG ES ES EU
DG DG DG ES EF EU
DG DG DG ES EF EU
FZ FM FM FM
FZ FM FM FM
FM FM FM FY
FM FM FM FY
LB LB LB LA
LB LB LB LA
LB LB LB LA
LB LB LB LB
DC DC
DC DC
ES EF EU
ES EF EU
Rated Voltage (VDC)
Cap
Code
Capacitance
Voltage Code
C
B
D
C
B
D
C
B
D
F
G
C
B
D
F
G
C
B
D
F
G
Z
H
Case Size/Series
C0603X
C0805X
C1206X
C1210X
C1808X
*Capacitance range Includes E24 decade values only. (i.e., 10, 11, 12, 13, 15, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 43, 47, 51, 56, 62, 68, 75, 82, and 91)
KEMET reserves the right to substitute product with an improved temperature characteristic, tighter capacitance tolerance and/or higher voltage
capability within the same form factor (configuration and dimensions).
These products are protected under US Patents 7,172,985 and 7,670,981, other patents pending, and any foreign counterparts.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1070_C0G_HV_FT-CAP_SMD • 6/27/2017
6
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 – 3,000 VDC (Commercial Grade)
Table 1A – Capacitance Range/Selection Waterfall (0603 – 1808 Case Sizes) cont’d
Case Size/Series
C0603X C0805X
C1206X
C1210X
C1808X
Voltage Code
C
B
D
C
B
D
C
B
D
F
G
C
B
D
F
G
C
B
D
F
G
Z
H
Cap
Capacitance
Rated Voltage (VDC)
Code
Product Availability and Chip Thickness Codes
See Table 2 for Chip Thickness Dimensions
Capacitance Tolerance
1,100 pF
1,200 pF
1,300 pF
1,500 pF
1,600 pF
1,800 pF
2,000 pF
2,200 pF
2,400 pF
2,700 pF
3,000 pF
3,300 pF
3,600 pF
3,900 pF
4,300 pF
4,700 pF
5,100 pF
5,200 pF
6,200pF
6,800pF
7,500pF
8,200pF
9,100 pF
10,000 pF
12,000 pF
15,000 pF
18,000 pF
22,000 pF
112
122
132
152
162
182
202
222
242
272
302
332
362
392
432
472
512
562
622
682
752
822
912
103
123
153
183
223
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
DC DC
DC DC
DC DC
DD DD
DD DD
DG DG
DG DG
DG DG
DG DG
DG DG
EF EU ED
EF EU ED
EF EU ED
EF EU ED
EF EU ED
EF EU EF
EU EQ EF
EU EQ EF
EU EQ EU
EU EQ EU
EQ EQ
EQ EQ
ER ER
ER ER
ES ES
ES ES
EE EE
EF EF
EF EF
FM FK FK FS
FM FK FK FS
FM FS FS
FK FS FS
FK FS FS
FK FS FS
FK FL FS
FK FL FS
FS FL FS
FS FL FS
FS FL FF
FS FM FG
FL FM FG
FL FY FL
FM FY FL
FM FY FM
FY FS FM
FY FS FM
FY FE FY
FY FE FY
FS FF
LC LC LC LB
LC LC LC LC
LC LC LC LC
LC LC LC LC
LC LC LC
LC LC LC
LC LA LB
LC LA LB
LC LA LB
LC LA LC
LA LA LA
LA LA LA
LA LB LA
LA LB LA
LA LC LA
LA LC LB
LA LB LB
LB LC LC
LC LC LC
LC LC LC
LA LA
EU EU
EU EU
EU EU
EU EU
FS FF
FF FF
FG FG
FG FG
FM FM
FM FM
FY FY
LA LA
LA LA
LA LA
LA LA
LB LB
LC LC
EU EU
Rated Voltage (VDC)
Cap
Code
Capacitance
Voltage Code
C
B
D
C
B
D
C
B
D
F
G
C
B
D
F
G
C
B
D
F
G
Z
H
Case Size/Series
C0603X
C0805X
C1206X
C1210X
C1808X
*Capacitance range Includes E24 decade values only. (i.e., 10, 11, 12, 13, 15, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 43, 47, 51, 56, 62, 68, 75, 82, and 91)
KEMET reserves the right to substitute product with an improved temperature characteristic, tighter capacitance tolerance and/or higher voltage
capability within the same form factor (configuration and dimensions).
These products are protected under US Patents 7,172,985 and 7,670,981, other patents pending, and any foreign counterparts.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1070_C0G_HV_FT-CAP_SMD • 6/27/2017
7
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 – 3,000 VDC (Commercial Grade)
Table 1B – Capacitance Range/Selection Waterfall (1812 – 2225 Case Sizes)
Case Size/
C1812X
C1825X
C2220X
C2225X
Series
Voltage Code
C
B
D
F
G
Z
H
C
B
D
F
G
Z
H
C
B
D
F
G
Z
H
C
B
D
F
G
Z
H
Cap
Code
Cap
Rated Voltage (VDC)
Capacitance
Tolerance
Product Availability and Chip Thickness Codes
See Table 2 for Chip Thickness Dimensions
10 pF
11 pF
12 pF
13 pF
15 pF
16 pF
18 pF
20 pF
22 pF
24 pF
27 pF
30 pF
33 pF
36 pF
39 pF
43 pF
47 pF
51 pF
56 pF
62 pF
68 pF
75 pF
82 pF
91 pF
100 pF
110 pF
120 pF
130 pF
150 pF
160 pF
180 pF
200 pF
220 pF
240 pF
270 pF
300 pF
330 pF
360 pF
390 pF
430 pF
470 pF
510 pF
560 pF
620 pF
680 pF
750 pF
820 pF
910 pF
1,000 pF
1,100 pF
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
101
111
121
131
151
161
181
201
221
241
271
301
331
361
391
431
471
511
561
621
681
751
821
911
102
112
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GH GH GH GH GH GK GM
GH GH GH GH GH GK GM
GH GH GH GH GH GK GM
GH GH GH GH GH GK GM
GH GH GH GH GH GK GM
GH GH GH GH GH GK GO
GK GK GK GK GH GK GO
GK GK GK GK GK GK GO
GK GK GK GK GK GK
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KE KE KE KE KE KE KF
JK JK JK JK JK JK JK KE KE KE KE KE KE KF
JK JK JK JK JK JK JK KE KE KE KE KE KE KF
JE JE JE JE JE JK JK KE KE KE KE KE KE KF
JE JE JE JE JE JK JK KE KE KE KE KE KE KF
JE JE JE JE JE JK JK KE KE KE KE KE KE KF
HJ JE JE JE JE JE JK JE KE KE KE KE KE KE KF
HJ JE JE JE JE JE JK JK KF KF KF KF KE KE KF
HJ JK JK JK JK JK JK JK KF KF KF KF KE KE KF
HJ JK JK JK JK JK JK JL KF KF KF KF KE KE KF
HK JK JK JK JK JK JK JL KF KF KF KF KE KF KH
HK JE JE JE JK JK JK JL KF KF KF KF KE KF KH
JE JE JE JK JK JK JL KE KE KE KF KE KF KH
JE JE JE JK JK JK JN KE KE KE KF KE KF KJ
JE JK JK JK JK JK JN KE KE KE KF KE KF KJ
JE JK JK JK JK JK JN KE KE KE KF KE KF KJ
GK GK GK GK GK GK
GH GH GH GK GH GM
GH GH GH GK GH GM
GH GH GH GK GH GM
GH GH GH GK GH GO
GH GH GH GK GK
GH GH GH GK GK
GH GH GH GH GM
GH GH GH GH GM
GH GK GK GH GO
Rated Voltage (VDC)
Voltage Code
Cap
Code
C
B
D
F
G
Z
H
C
B
D
F
G
Z
H
C
B
D
F
G
Z
H
C
B
D
F
G
Z
H
Cap
Case Size/Series
C1812X
C1825X
C2220X
C2225X
*Capacitance range Includes E24 decade values only. (i.e., 10, 11, 12, 13, 15, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 43, 47, 51, 56, 62, 68, 75, 82, and 91)
KEMET reserves the right to substitute product with an improved temperature characteristic, tighter capacitance tolerance and/or higher voltage
capability within the same form factor (configuration and dimensions).
These products are protected under US Patents 7,172,985 and 7,670,981, other patents pending, and any foreign counterparts.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1070_C0G_HV_FT-CAP_SMD • 6/27/2017
8
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 – 3,000 VDC (Commercial Grade)
Table 1B – Capacitance Range/Selection Waterfall (1812 – 2225 Case Sizes) cont’d
Case Size/
C1812X
C1825X
C2220X
C2225X
Series
Voltage Code
C
B
D
F
G
Z
H
C
B
D
F
G
Z
H
C
B
D
F
G
Z
H
C
B
D
F
G
Z
H
Cap
Code
Cap
Rated Voltage (VDC)
Capacitance
Tolerance
Product Availability and Chip Thickness Codes
See Table 2 for Chip Thickness Dimensions
1,200 pF
1,300 pF
1,500 pF
1,600 pF
1,800 pF
2,000 pF
2,200 pF
2,400 pF
2,700 pF
3,000 pF
3,300 pF
3,600 pF
3,900 pF
4,300 pF
4,700 pF
5,100 pF
5,600 pF
6,200 pF
6,800 pF
7,500 pF
8,200 pF
9,100 pF
10,000 pF
12,000 pF
15,000 pF
18,000 pF
22,000 pF
27,000 pF
33,000 pF
39,000 pF
122
132
152
162
182
202
222
242
272
302
332
362
392
432
472
512
562
622
682
752
822
912
103
123
153
183
223
273
333
393
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
GH GK GK GH GO
GH GK GK GH GO
GK GK GK GK GO
GK GK GK GK
GK GK GK GM
GK GK GK GM
GK GK GK GO
GK GH GK GO
GK GH GK GO
GK GH GK
GK GH GK
GK GH GM
GK GH GM
GH GH GO
GH GH GO
GH GK GO
GH GK GO
GH GK GH
GH GM GH
GH GM GK
GK GO GK
GM GO GM
GM GO GM
GO GH
HJ
HJ
HE HJ
HE HK
HG HK
HG
JE JK JK JK JK JK
JE JK JK JK JK JL
JE JK JK JK JE JL
JE JK JK JK JE JL
JE JK JK JK JE JL
JE JK JK JK JE JN
JE JK JK JE JK
JE JK JK JE JK
JK JK JK JE JL
JK JK JK JE JL
JK JK JK JE JL
JK JK JK JK JN
JK JK JK JK JN
JK JK JK JK JN
JK JK JK JK
JK JK JK JL
JK JK JK JL
JK JK JK JN
JK JE JE JN
JK JE JK JN
JK JE JK
KE KE KE KF KF KF
KE KE KE KF KF KF
KE KE KE KF KF KH
KE KE KE KF KF KH
KE KE KE KF KE KH
KE KE KE KF KE KH
KE KE KE KF KE KJ
KE KE KE KF KF KJ
KE KE KE KE KH
KE KE KE KE KH
KE KE KE KE KH
KE KE KE KE KJ
KE KF KF KF KJ
KE KF KF KF KJ
KE KF KF KF
KE KF KF KH
KE KF KF KH
KE KF KF KH
KE KF KF KJ
KE KF KF KJ
KF KE KF
HE HJ
HE HJ
HE HJ
HE HK
HE HK
HG
HG
HJ
HJ
HJ
HE HG HK
HE HG HK
HE HG
HE HJ
HE HJ
HE HJ
JK JE JL
JE JE JL
JE JE JL
JE JK JN
JE JL
JE JL
JK JN
JL JN
KF KE KF
KF KE KH
KF KE KH
KE KE KH
KE KF KJ
KE KH
KF KJ
KF KJ
HE HG HK
HE HG HK
HE HG
HE HJ
HG HK
HJ
GO GH
GH GH
GH GH
GK GK
GM GM
HJ
HK
JN
KH
KJ
Rated Voltage (VDC)
Voltage Code
Cap
Code
C
B
D
F
G
Z
H
C
B
D
F
G
Z
H
C
B
D
F
G
Z
H
C
B
D
F
G
Z
H
Cap
Case Size/Series
C1812X
C1825X
C2220X
C2225X
*Capacitance range Includes E24 decade values only. (i.e., 10, 11, 12, 13, 15, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 43, 47, 51, 56, 62, 68, 75, 82, and 91)
KEMET reserves the right to substitute product with an improved temperature characteristic, tighter capacitance tolerance and/or higher voltage
capability within the same form factor (configuration and dimensions).
These products are protected under US Patents 7,172,985 and 7,670,981, other patents pending, and any foreign counterparts.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1070_C0G_HV_FT-CAP_SMD • 6/27/2017
9
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 – 3,000 VDC (Commercial Grade)
Table 2A – Chip Thickness/Tape & Reel Packaging Quantities
Paper Quantity
Plastic Quantity
7" Reel 13" Reel
Thickness Case Thickness ±
Code
Size
Range (mm)
7" Reel
13" Reel
CJ
DC
DD
DG
EQ
ER
ED
ES
EE
EF
EU
FE
FF
FG
FZ
FL
FM
FY
FK
FS
LA
LB
LC
GH
GK
GM
GO
HE
HG
HJ
HK
JE
JK
JL
JN
KE
KF
KH
KJ
0603
0805
0805
0805
1206
1206
1206
1206
1206
1206
1206
1210
1210
1210
1210
1210
1210
1210
1210
1210
1808
1808
1808
1812
1812
1812
1812
1825
1825
1825
1825
2220
2220
2220
2220
2225
2225
2225
2225
0.80 ± 0.15*
0.78 ± 0.10
0.90 ± 0.10
1.25 ± 0.15
0.78 ± 0.20
0.90 ± 0.20
1.00 ± 0.10
1.00 ± 0.20
1.10 ± 0.10
1.20 ± 0.15
1.60 ± 0.25
1.00 ± 0.10
1.10 ± 0.10
1.25 ± 0.15
1.25 ± 0.20
1.40 ± 0.15
1.70 ± 0.20
2.00 ± 0.20
2.10 ± 0.20
2.50 ± 0.30
1.40 ± 0.15
1.60 ± 0.15
2.00 ± 0.15
1.40 ± 0.15
1.60 ± 0.20
2.00 ± 0.20
2.50 ± 0.20
1.40 ± 0.15
1.60 ± 0.20
2.00 ± 0.20
2.50 ± 0.20
1.40 ± 0.15
1.60 ± 0.20
2.00 ± 0.20
2.50 ± 0.20
1.40 ± 0.15
1.60 ± 0.20
2.00 ± 0.20
2.50 ± 0.20
4,000
0
0
15,000
0
0
0
0
0
4,000
4,000
2,500
4,000
4,000
2,500
2,500
2,500
2,500
2,000
2,500
2,500
2,500
2,500
2,000
2,000
2,000
2,000
1,000
1,000
1,000
1,000
1,000
1,000
500
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
8,000
10,000
10,000
10,000
10,000
8,000
8,000
8,000
8,000
4,000
4,000
4,000
4,000
4,000
4,000
2,000
2,000
4,000
4,000
2,000
2,000
4,000
4,000
2,000
2,000
4,000
4,000
2,000
2,000
0
4,000
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
10,000
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
500
1,000
1,000
500
500
1,000
1,000
500
500
1,000
1,000
500
0
0
500
7" Reel
13" Reel
7" Reel
13" Reel
Thickness
Code
Case
Size
Thickness ±
Range (mm)
Paper Quantity
Plastic Quantity
Package quantity based on finished chip thickness specifications.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1070_C0G_HV_FT-CAP_SMD • 6/27/2017
10
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 – 3,000 VDC (Commercial Grade)
Table 2B – Bulk Packaging Quantities
Loose Packaging
Packaging Type
Bulk Bag (default)
Packaging C-Spec1
N/A2
Case Size
Packaging Quantities (pieces/unit packaging)
EIA (in)
Metric (mm)
Minimum
Maximum
0603
0805
1206
1210
1808
1812
1825
2220
2225
1608
2012
3216
3225
4520
4532
4564
5650
5664
50,000
1
20,000
1 The "Packaging C-Spec" is a 4 to 8 digit code which identifies the packaging type and/or product grade. When ordering, the proper code must be
included in the 15th through 22nd character positions of the ordering code. See "Ordering Information" section of this document for further details.
Commercial Grade product ordered without a packaging C-Spec will default to our standard "Bulk Bag" packaging. Contact KEMET if you require a bulk
bag packaging option for Automotive Grade products.
2 A packaging C-Spec (see note 1 above) is not required for "Bulk Bag" packaging (excluding Anti-Static Bulk Bag and Automotive Grade products). The
15th through 22nd character positions of the ordering code should be left blank. All product ordered without a packaging C-Spec will default to our
standard "Bulk Bag" packaging.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1070_C0G_HV_FT-CAP_SMD • 6/27/2017
11
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 – 3,000 VDC (Commercial Grade)
Table 3 – Chip Capacitor Land Pattern Design Recommendations per IPC–7351
Density Level A:
Maximum (Most)
Land Protrusion (mm)
Density Level B:
Median (Nominal)
Land Protrusion (mm)
Density Level C:
Minimum (Least)
Land Protrusion (mm)
EIA
Size
Code
Metric
Size
Code
C
Y
X
V1
V2
C
Y
X
V1
V2
C
Y
X
V1
V2
0603
0805
1206
1210
1808
1812
1825
2220
2225
1608
2012
3216
3225
4520
4532
4564
5650
5664
0.90
1.15
1.10
4.00
2.10
0.80
0.95
1.00
3.10
1.50
0.60
0.75
0.90
2.40
1.20
0.99
1.59
1.59
2.30
2.10
2.15
2.85
2.85
1.44
1.62
1.62
1.75
1.80
1.80
2.10
2.10
1.66
2.06
3.01
2.30
3.60
6.90
5.50
6.90
4.47
5.85
5.90
7.40
7.00
7.10
8.80
8.80
2.71
3.06
4.01
3.30
4.60
7.90
6.50
7.90
0.89
1.49
1.49
2.20
2.00
2.05
2.75
2.75
1.24
1.42
1.42
1.55
1.60
1.60
1.90
1.90
1.56
1.96
2.91
2.20
3.50
6.80
5.40
6.80
3.57
4.95
4.95
6.50
6.10
6.20
7.90
7.90
2.11
2.46
3.41
2.70
4.00
7.30
5.90
7.30
0.79
1.39
1.39
2.10
1.90
1.95
2.65
2.65
1.04
1.22
1.22
1.35
1.40
1.40
1.70
1.70
1.46
1.86
2.81
2.10
3.40
6.70
5.30
6.70
2.42
4.25
4.25
5.80
5.40
5.50
7.20
7.20
1.81
2.16
3.11
2.40
3.70
7.00
5.60
7.00
Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow
solder processes. KEMET only recommends wave soldering of EIA 0603, 0805 and 1206 case sizes.
Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes.
Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform
qualification testing based on the conditions outlined in IPC Standard 7351 (IPC–7351).
Image below based on Density Level B for an EIA 1210 case size.
Vꢂ
ꢀ
ꢀ
Vꢃ
ꢁ
ꢁ
C
C
Grid Placement Courtyard
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1070_C0G_HV_FT-CAP_SMD • 6/27/2017
12
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 – 3,000 VDC (Commercial Grade)
Soldering Process
Recommended Soldering Technique:
• Solder wave or solder reflow for EIA case sizes 0603, 0805 and 1206
• All other EIA case sizes are limited to solder reflow only
Recommended Reflow Soldering Profile:
KEMET’s families of surface mount multilayer ceramic capacitors (SMD MLCCs) are compatible with wave (single or dual),
convection, IR or vapor phase reflow techniques. Preheating of these components is recommended to avoid extreme thermal
stress. KEMET’s recommended profile conditions for convection and IR reflow reflect the profile conditions of the IPC/
J-STD-020 standard for moisture sensitivity testing. These devices can safely withstand a maximum of three reflow passes
at these conditions.
Termination Finish
TP
TL
tP
Profile Feature
Maximum ꢁamp ꢂp ꢁate ꢃ 3ꢄCꢅsec
Maximum ꢁamp Down ꢁate ꢃ ꢆꢄCꢅsec
SnPb
100% Matte Sn
tL
Preheat/Soak
Temperature Minimum (TSmin
)
100°C
150°C
150°C
200°C
Tsmax
Tsmin
Temperature Maximum (TSmax
Time (tS) from TSmin to TSmax
)
60 – 120 seconds
60 – 120 seconds
ts
3°C/second
maximum
3°C/second
maximum
Ramp-Up Rate (TL to TP)
ꢀ5
ꢀ5ꢄC to Peaꢇ
Liquidous Temperature (TL)
Time Above Liquidous (tL)
Peak Temperature (TP)
183°C
60 – 150 seconds
235°C
217°C
60 – 150 seconds
260°C
Time
Time Within 5°C of Maximum
Peak Temperature (tP)
20 seconds
maximum
30 seconds
maximum
6°C/second
maximum
6°C/second
maximum
Ramp-Down Rate (TP to TL)
Time 25°C to Peak
Temperature
6 minutes
maximum
8 minutes
maximum
Note 1: All temperatures refer to the center of the package, measured on the
capacitor body surface that is facing up during assembly reflow.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1070_C0G_HV_FT-CAP_SMD • 6/27/2017
13
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 – 3,000 VDC (Commercial Grade)
Table 4 – Performance & Reliability: Test Methods and Conditions
Stress
Reference
Test or Inspection Method
Terminal Strength
JIS–C–6429
Appendix 1, Note: Force of 1.8 kg for 60 seconds.
Appendix 2, Note: Standard termination system – 2.0 mm (minimum) for all except 3 mm
for C0G. Flexible termination system – 3.0 mm (minimum).
Board Flex
JIS–C–6429
Magnification 50 X. Conditions:
a) Method B, 4 hours at 155°C, dry heat at 235°C
b) Method B at 215°C category 3
Solderability
J–STD–002
c) Method D, category 3 at 260°C
Temperature Cycling
Biased Humidity
JESD22 Method JA–104 1,000 cycles (−55°C to +125°C). Measurement at 24 hours +/−4 hours after test conclusion.
Load Humidity: 1,000 hours 85°C/85% RH and 200 VDC maximum. Add 100 K ohm resistor.
Measurement at 24 hours +/−4 hours after test conclusion.
MIL–STD–202 Method
103
Low Volt Humidity: 1,000 hours 85°C/85% RH and 1.5 V. Add 100 K ohm resistor.
Measurement at 24 hours +/−4 hours after test conclusion.
MIL–STD–202 Method
106
t = 24 hours/cycle. Steps 7a and 7b not required. Measurement at 24 hours +/−4 hours after
test conclusion.
Moisture Resistance
MIL–STD–202 Method
107
MIL–STD–202 Method
108
MIL–STD–202 Method
108
−55°C/+125°C. Note: Number of cycles required – 300. Maximum transfer time – 20
Thermal Shock
High Temperature Life
Storage Life
seconds. Dwell time – 15 minutes. Air – Air.
1,000 hours at 125°C (85°C for X5R, Z5U and Y5V) with 1.2 X rated voltage applied.
150°C, 0 VDC for 1,000 hours.
5 g's for 20 min., 12 cycles each of 3 orientations. Note: Use 8" X 5" PCB 0.031" thick 7
secure points on one long side and 2 secure points at corners of opposite sides. Parts
mounted within 2" from any secure point. Test from 10 – 2,000 Hz
MIL–STD–202 Method
204
Vibration
MIL–STD–202 Method
Mechanical Shock
Figure 1 of Method 213, Condition F.
213
MIL–STD–202 Method
215
Resistance to Solvents
Add aqueous wash chemical, OKEM Clean or equivalent.
Storage and Handling
Ceramic chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in
other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres,
and long term storage. In addition, packaging materials will be degraded by high temperature–reels may soften or warp
and tape peel force may increase. KEMET recommends that maximum storage temperature not exceed 40ºC and maximum
storage humidity not exceed 70% relative humidity. Temperature fluctuations should be minimized to avoid condensation on
the parts and atmospheres should be free of chlorine and sulfur bearing compounds. For optimized solderability chip stock
should be used promptly, preferably within 1.5 years of receipt.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1070_C0G_HV_FT-CAP_SMD • 6/27/2017
14
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 – 3,000 VDC (Commercial Grade)
Construction
Detailed Cross Section
Dielectric Material
(Caꢇrꢈ3)
ꢀnd Terminationꢁ
ꢀxternal ꢀlectrode
(Cu)
Barrier Layer
(Ni)
Termination Finish
ꢀpoxy Layer
(Ag)
(ꢅ00ꢆ Matte
SnꢁSnPb–5ꢆ Pb min)
Dielectric Material
(Caꢇrꢈ3)
ꢄnner ꢀlectrodes
(ꢃi)
ꢀnd Terminationꢁ
ꢀxternal ꢀlectrode
(Cu)
Epoxy Layer
(Ag)
ꢂarrier Layer
(ꢃi)
Termination Finish
Inner Electrodes
(Ni)
(ꢅ00ꢆ Matte
SnꢁSnPb–5ꢆ Pb min)
Capacitor Marking (Optional):
Laser marking option is not available on:
• C0G, Ultra Stable X8R and Y5V dielectric devices
• EIA 0402 case size devices
• EIA 0603 case size devices with Flexible Termination option.
• KPS Commercial and Automotive grade stacked devices.
These capacitors are supplied unmarked only.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1070_C0G_HV_FT-CAP_SMD • 6/27/2017
15
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 – 3,000 VDC (Commercial Grade)
Tape & Reel Packaging Information
KEMET offers multilayer ceramic chip capacitors packaged in 8, 12 and 16 mm tape on 7" and 13" reels in accordance with
EIA Standard 481. This packaging system is compatible with all tape-fed automatic pick and place systems. See Table 2 for
details on reeling quantities for commercial chips.
ꢑar Code Label
Anti-Static ꢇeel
®
ꢈmbossed Plasticꢉ or
Punched Paper Carrierꢅ
Chip and ꢍPS ꢎrientation in Pocꢌet
(except ꢁꢀꢂ5 Commercial, and ꢁꢀꢂ5 and ꢂꢂꢂ5 Military)
KEMET
Sprocꢌet Holes
ꢈmbossment or Punched Caꢊity
ꢀ mm, ꢁꢂ mm
or ꢁꢃ mm Carrier Tape
Anti-Static Coꢊer Tape
(ꢅꢁ0 mm (ꢅ00ꢋꢆ) Maximum Thicꢌness)
ꢁꢄꢀ mm (ꢄꢅ00ꢆ)
or
330 mm (ꢁ3ꢅ00ꢆ)
ꢉꢈꢏA 0ꢁ005, 0ꢂ0ꢁ, 0ꢋ0ꢂ and 0ꢃ03 case siꢐes aꢊailable on punched paper carrier onlyꢅ
Table 5 – Carrier Tape Configuration, Embossed Plastic & Punched Paper (mm)
New 2 mm Pitch Reel Options*
Embossed Plastic Punched Paper
Tape
Packaging
Ordering Code
(C-Spec)
C-3190
7" Reel 13" Reel 7" Reel 13" Reel
EIA Case Size Size
(W)*
Packaging Type/Options
Pitch (P1)* Pitch (P1)*
01005 – 0402
0603
8
8
2
2
2/4
4
Automotive grade 7" reel unmarked
Automotive grade 13" reel unmarked
Commercial grade 7" reel unmarked
Commercial grade 13" reel unmarked
C-3191
2/4
4
C-7081
0805
8
4
4
4
C-7082
1206 – 1210
1805 – 1808
≥ 1812
8
4
4
4
4
* 2 mm pitch reel only available for 0603 EIA case size.
2 mm pitch reel for 0805 EIA case size under development.
12
12
12
16
8
4
8
8
Benefits of Changing from 4 mm to 2 mm Pitching Spacing
• Lower placement costs
• Double the parts on each reel results in fewer reel
changes and increased efficiency
• Fewer reels result in lower packaging, shipping and
storage costs, reducing waste
KPS 1210
8
8
KPS 1812 & 2220
Array 0508 & 0612
12
4
12
4
*Refer to Figures 1 & 2 for W and P1 carrier tape reference locations.
*Refer to Tables 6 & 7 for tolerance specifications.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1070_C0G_HV_FT-CAP_SMD • 6/27/2017
16
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 – 3,000 VDC (Commercial Grade)
Figure 1 – Embossed (Plastic) Carrier Tape Dimensions
T
T
P ꢆ
ꢌꢄ0 pitches cumulatiꢁe
tolerance on tape ꢍ 0ꢅꢆ mmꢎ
ꢆ
ꢈ
ꢄ
Po
ꢇDo
Ao
F
ꢃo
ꢀ
ꢈ
ꢆ
ꢂ
ꢄ
ꢂo
S
ꢄ
P
ꢄ
T
ꢄ
ꢈmbossment
For caꢁity siꢉe,
see ꢊote ꢄ Table ꢋ
Center Lines of Caꢁity
ꢇD
ꢄ
Coꢁer Tape
is for tape feeder reference only,
including draft concentric about ꢂoꢅ
ꢂ
ꢄ
User Direction of Unreeling
Table 6 – Embossed (Plastic) Carrier Tape Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
D1 Minimum
Note 1
1.0
(0.039)
R Reference S1 Minimum
T
T1
Tape Size
8 mm
D0
E1
P0
P2
Note 2
Note 3
Maximum Maximum
25.0
(0.984)
1.5 +0.10/-0.0
(0.059 +0.004/-
0.0)
1.75 ±0.10
4.0 ±0.10
2.0 ±0.05
0.600
0.600
(0.024)
0.100
(0.004)
12 mm
16 mm
(0.069 ±0.004) (0.157 ±0.004) (0.079 ±0.002)
(0.024)
1.5
(0.059)
30
(1.181)
Variable Dimensions — Millimeters (Inches)
B1 Maximum
Note 4
E2
T2
W
Tape Size
8 mm
Pitch
F
P1
A0,B0 & K0
Minimum
6.25
(0.246)
Maximum Maximum
2.5
(0.098)
4.35
(0.171)
3.5 ±0.05
(0.138 ±0.002) (0.157 ±0.004)
4.0 ±0.10
8.3
(0.327)
Single (4 mm)
Single (4 mm) &
Double (8 mm)
8.2
10.25
5.5 ±0.05
8.0 ±0.10
4.6
12.3
12 mm
16 mm
Note 5
(0.323)
(0.404)
(0.217 ±0.002) (0.315 ±0.004)
(0.181)
(0.484)
12.1
(0.476)
14.25
(0.561)
7.5 ±0.05 12.0 ±0.10
(0.138 ±0.002) (0.157 ±0.004)
4.6
(0.181)
16.3
(0.642)
Triple (12 mm)
1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment
location and hole location shall be applied independent of each other.
2. The tape with or without components shall pass around R without damage (see Figure 6).
3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481 paragraph 4.3 section b).
4. B1 dimension is a reference dimension for tape feeder clearance only.
5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that:
(a) the component does not protrude above the top surface of the carrier tape.
(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
(c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes and 10° maximum for 16 mm tapes (see Figure 3).
(d) lateral movement of the component is restricted to 0.5 mm maximum for 8 and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see
Figure 4).
(e) for KPS Series product, A0 and B0 are measured on a plane 0.3 mm above the bottom of the pocket.
(f) see Addendum in EIA Standard 481 for standards relating to more precise taping requirements.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1070_C0G_HV_FT-CAP_SMD • 6/27/2017
17
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 – 3,000 VDC (Commercial Grade)
Figure 2 – Punched (Paper) Carrier Tape Dimensions
T
ꢊꢁ0 pitches cumulatiꢀe
ꢃꢁ
Po
ꢂDo
tolerance on tape ꢋ 0ꢌꢄ mmꢍ
A0
F
ꢅ
ꢃꢄ
ꢆ0
ꢆottom Coꢀer Tape
Pꢁ
G
Caꢀity Siꢇe,
See
Tꢁ
Tꢁ
Center Lines of Caꢀity
Top Coꢀer Tape
ꢈote ꢁ, Table ꢉ
ꢆottom Coꢀer Tape
User Direction of Unreeling
Table 7 – Punched (Paper) Carrier Tape Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
R Reference
Note 2
Tape Size
8 mm
D0
E1
P0
P2
T1 Maximum
G Minimum
0.10
1.5 +0.10 -0.0
(0.059 +0.004 -0.0)
1.75 ±0.10
(0.069 ±0.004)
4.0 ±0.10
(0.157 ±0.004)
2.0 ±0.05
(0.079 ±0.002)
0.75
(0.030)
25
(0.984)
(0.004)
Maximum
Variable Dimensions — Millimeters (Inches)
Tape Size
8 mm
Pitch
E2 Minimum
F
P1
T Maximum
W Maximum
A0 B0
2.0 ±0.05
(0.079 ±0.002)
4.0 ±0.10
(0.157 ±0.004)
8.3
(0.327)
8.3
(0.327)
Half (2 mm)
Single (4 mm)
6.25
(0.246)
3.5 ±0.05
(0.138 ±0.002)
1.1
(0.098)
Note 1
8 mm
1. The cavity defined by A0, B0 and T shall surround the component with sufficient clearance that:
a) the component does not protrude beyond either surface of the carrier tape.
b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
c) rotation of the component is limited to 20° maximum (see Figure 3).
d) lateral movement of the component is restricted to 0.5 mm maximum (see Figure 4).
e) see Addendum in EIA Standard 481 for standards relating to more precise taping requirements.
2. The tape with or without components shall pass around R without damage (see Figure 6).
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1070_C0G_HV_FT-CAP_SMD • 6/27/2017
18
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 – 3,000 VDC (Commercial Grade)
Packaging Information Performance Notes
1. Cover Tape Break Force: 1.0 Kg minimum.
2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:
Tape Width
8 mm
Peel Strength
0.1 to 1.0 Newton (10 to 100 gf)
0.1 to 1.3 Newton (10 to 130 gf)
12 and 16 mm
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be
165° to 180° from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of
300 ±10 mm/minute.
3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA
Standards 556 and 624.
Figure 3 – Maximum Component Rotation
°
T
Maximum Component Rotation
Top View
Maximum Component Rotation
Side View
Typical Pocꢆet Centerline
Tape
Maximum
°
°
T
s
Width (mm) Rotation (
)
ꢁ,ꢂꢃ
ꢂꢄ – ꢃ00
ꢃ0
ꢂ0
ꢀo
Tape
Maximum
°
S
Width (mm) Rotation (
)
ꢁ,ꢂꢃ
ꢂꢄ – 5ꢄ
ꢅꢃ – ꢃ00
ꢃ0
ꢂ0
5
Typical Component Centerline
Ao
Figure 4 – Maximum Lateral Movement
Figure 5 – Bending Radius
ꢂmbossed
Carrier
Punched
Carrier
ꢁ mm ꢂ ꢃꢄ mm Tape
ꢃꢅ mm Tape
0ꢀ5 mm maximum
0ꢀ5 mm maximum
ꢃꢀ0 mm maximum
ꢃꢀ0 mm maximum
ꢀ
ꢁending
ꢀadius
ꢀ
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1070_C0G_HV_FT-CAP_SMD • 6/27/2017
19
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 – 3,000 VDC (Commercial Grade)
Figure 6 – Reel Dimensions
Full ꢁadius,
See ꢀote
ꢊ3 (ꢅncludes
Access Hole at
Slot Location
(ꢃ ꢄ0 mm minimum)
flange distortion
at outer edge)
ꢊꢇ (Measured at hub)
D
(See ꢀote)
A
ꢀ
C
(Arbor hole
ꢊꢉ (Measured at hub)
diameter)
ꢅf present,
tape slot in core
for tape startꢆ
ꢇꢈ5 mm minimum width x
ꢉ0ꢈ0 mm minimum depth
ꢂ
(see ꢀote)
ꢀoteꢆ Driꢋe spoꢌes optionalꢍ if used, dimensions ꢂ and D shall applyꢈ
Table 8 – Reel Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size
8 mm
A
B Minimum
C
D Minimum
178 ±0.20
(7.008 ±0.008)
or
1.5
(0.059)
13.0 +0.5/-0.2
(0.521 +0.02/-0.008)
20.2
(0.795)
12 mm
16 mm
330 ±0.20
(13.000 ±0.008)
Variable Dimensions — Millimeters (Inches)
Tape Size
8 mm
N Minimum
W1
W2 Maximum
W3
8.4 +1.5/-0.0
(0.331 +0.059/-0.0)
14.4
(0.567)
50
(1.969)
12.4 +2.0/-0.0
18.4
Shall accommodate tape
width without interference
12 mm
16 mm
(0.488 +0.078/-0.0)
(0.724)
16.4 +2.0/-0.0
(0.646 +0.078/-0.0)
22.4
(0.882)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1070_C0G_HV_FT-CAP_SMD • 6/27/2017
20
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 – 3,000 VDC (Commercial Grade)
Figure 7 – Tape Leader & Trailer Dimensions
ꢄmbossed Carrier
Carrier Tape
Punched Carrier
ꢇ mm ꢈ ꢀꢅ mm only
ꢂound Sprocꢃet Holes
START
END
Top Coꢆer Tape
ꢄlongated Sprocꢃet Holes
(3ꢅ mm tape and wider)
ꢀ00 mm
Minimum Leader
ꢉ00 mm Minimum
Trailer
Components
ꢀꢁ0 mm Minimum
Top Coꢆer Tape
Figure 8 – Maximum Camber
ꢃlongated Sprocꢁet Holes
(3ꢄ mm ꢅ wider tapes)
Carrier Tape
ꢀound Sprocꢁet Holes
ꢂ mm Maximum, either direction
Straight ꢃdge
ꢄ50 mm
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1070_C0G_HV_FT-CAP_SMD • 6/27/2017
21
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 – 3,000 VDC (Commercial Grade)
KEMET Electronics Corporation Sales Offices
For a complete list of our global sales offices, please visit www.kemet.com/sales.
Disclaimer
All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such
applications, but are not intended to constitute – and KEMET specifically disclaims – any warranty concerning suitability for a specific customer application or use.
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no
obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or
property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other
measures may not be required.
KEMET is a registered trademark of KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1070_C0G_HV_FT-CAP_SMD • 6/27/2017
22
相关型号:
C1206X102K1RACAUTO
Ceramic Capacitor, Multilayer, Ceramic, 100V, 10% +Tol, 10% -Tol, X7R, 15% TC, 0.001uF, Surface Mount, 1206, CHIP
KEMET
C1206X102K1RACTM
Ceramic Capacitor, Multilayer, Ceramic, 100V, 10% +Tol, 10% -Tol, X7R, 15% TC, 0.001uF, Surface Mount, 1206, CHIP, ROHS COMPLIANT
KEMET
C1206X102K1RACTU
Ceramic Capacitor, Multilayer, Ceramic, 100V, 10% +Tol, 10% -Tol, X7R, 15% TC, 0.001uF, Surface Mount, 1206, CHIP
KEMET
C1206X102K2RACTU
Ceramic, FlexTerm-(CxxxxX), 1000 pF, 10%, 200 V, 1206, X7R, SMD, MLCC, FT-CAP, Temperature Stable
KEMET
C1206X102K3RACTM
Ceramic Capacitor, Multilayer, Ceramic, 25V, 10% +Tol, 10% -Tol, X7R, 15% TC, 0.001uF, Surface Mount, 1206, CHIP, ROHS COMPLIANT
KEMET
C1206X102K3RACTU
Ceramic Capacitor, Multilayer, Ceramic, 25V, 10% +Tol, 10% -Tol, X7R, 15% TC, 0.001uF, Surface Mount, 1206, CHIP
KEMET
C1206X102K4RACAUTO
Ceramic Capacitor, Multilayer, Ceramic, 16V, 10% +Tol, 10% -Tol, X7R, 15% TC, 0.001uF, Surface Mount, 1206, CHIP
KEMET
©2020 ICPDF网 联系我们和版权申明