HH-1199-6D [JMK]
This filter was designed especially for power supply modules with power factor correction.; 该过滤器是专为供电模组采用功率因数校正。型号: | HH-1199-6D |
厂家: | JMK INC. |
描述: | This filter was designed especially for power supply modules with power factor correction. |
文件: | 总1页 (文件大小:200K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HH-1199-6D
This filter was designed especially for power
supply modules with power factor correction.
This filter works well on systems with require-
ments to meet the European EN55022 emissions
specification or for systems required to meet the
FCC conducted emissions standards.
Operating Voltage: 125 / 250 v~
Operating Current (Max): 6.0 AMP
Frequency: 50/60 Hz
Temperature Range (Storage): -40 to 85C
Temperature Range (Operating): -40 TO 50C
Diel. Withstanding Voltage (Line—case): 1500
Vac
Diel. Withstanding Voltage (line—Line): 1500
Vdc
Leakage Current @250 Vac, 60 Hz: 2.5 ma
Max.
Residual Voltage after 1.0 sec: 34 V Max.
Order p/n: HH-1199-6D
Note: This filter has a reduced height of 0.7
inch for tight
fitting applications. The pin height is also 0.19
inch.
USA
EUR
JMK Inc 15 Caldwell Dr. Amherst, NH 03031 PH: 603 886-4100
email: info@jmkfilters.com
PH: 44-(0) 7785310729 Fax: 44-(0) 141 589 1884
FX: 603 886-4115
JMK Inc Glasgow G13 1DN Scotland UK
相关型号:
HH-1355-6.3
The HH-1355-6.3C filter has been designed to operate with the VICOR Harmonic Attenuator Module (HAM)
JMK
HH-1355E-3
The HH-1355E-3 filter has been designed to operate with the VICOR Harmonic Attenuator Module (HAM).
JMK
©2020 ICPDF网 联系我们和版权申明