142H-532-100 [JDSU]
Continuous Wave (CW) Single Frequency Green Laser; 连续波( CW )单频绿光激光器型号: | 142H-532-100 |
厂家: | JDSU |
描述: | Continuous Wave (CW) Single Frequency Green Laser |
文件: | 总4页 (文件大小:212K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
COMMERCIAL LASERS
Continuous Wave (CW) Single Frequency Green Laser
NPRO® 142 Series
Key Features
• 532 nm output
• Proven nonplanar ring oscillator (NPRO) design
• Superior power stability
• Narrow linewidth
• Ease of use
Applications
The JDSU NPRO 142 series is a compact, low-noise, 532 nm, CW laser for use in
applications including interferometry, holography, printing, detection, and
inspection. Each NPRO 142 features superior power and pointing stability, with a
round, nearly diffraction-limited beam all in a compact package. All control
electronics are contained within a small laser head in this OEM design. Only a
basic DC power source is required to drive the laser.
• Interferometry
• Holography
• Printing
• Detection
• Inspection
At the heart of each NPRO 142 laser is JDS Uniphase’s unique, monolithic NPRO
laser cavity delivering true single-frequency laser output. Since its initial
development in 1985, NPRO technology has demonstrated a record of reliability
and top-level performance.
NPRO lasers are built in a compact, OEM-friendly package. All necessary control
electronics are onboard the laser head allowing for easy integration with existing
systems or new product platforms.
NORTH AMERICA: 800 498-JDSU (5378)
WORLDWIDE: +800 5378-JDSU
WEBSITE: www.jdsu.com
CW SINGLE FREQUENCY GREEN LASER
2
NPRO 142 Laser Head
(Specifications in inches [mm] unless otherwise noted.)
8.00 [203.7]
7.75 [197.0]
0.56 [14.26]
2.00 [50.8]
TOP VIEW
1.55
[39.3]
7.61 [193.29]
FRONT
CLOSE
2.26
[57.4]
SIDE VIEW
1.00 [25.4]
1.29
1
4 2
NPRO®
S E R I E S
[32.7]
CW SINGLE FREQUENCY GREEN LASER
3
NPRO 142 Specifications
Parameter
142H-532-xxx
Wavelength
532 nm
CW power options
>100, 200, 300, 400, 500 mW
Spatial mode
TEM00
Longitudinal mode
Single frequency
<10 kHz/ms
>1000 m
<10 MHz/minute
<0.2% rms
<5% peak-to-peak
>100:1, horizontal
M2<1.1
Linewidth (high-stability option only)
Coherence length, calculated (high-stability option only)
Frequency drift (high-stability option only) 1
Amplitude noise, 10 Hz to 2 MHz
Power drift over 8 hours 2
Polarization, linear 3
Times diffraction limit
Beam pointing stability 4
Waist diameter, at window, 1/e2
Beam divergence, full angle
Beam roundness, far field
Alignment tolerance
<0.01 mrad
0.42 mm nominal
1.6 mrad nominal
<10% elliptical
Beam position
< 1 mm
Beam angle
Warm-up time, from cold start (AC off)
Dimension
< 15 mrad
10 minutes
Laser head size (W x H x D)
Weight
6 x 8 x 20 cm
1.2 kg (2.65 lbs)
1. Base temperature constant to within <2 °C, total range, after 30 minute warm-up.
2. Base temperature constant to within <5 °C, total range.
3. Ratio of maximum transmission to minimum transmission, nominally horizontal.
4. Deviation from centroid, measured over 1 hour, after 30 minute warm-up and with base temperature constant to within <2 °C, total range.
NPRO 142 Integration Requirements
Parameter
Specification
Input and Ambient
DC voltage/current, maximum
Operating base temperature
Storage temperature
5 V/4 A, 12 V/4 A, -12 V/0.5 A
15 to 35 °C
-20 to 50 °C
Relative humidity, non-condensing
10 to 90%
CW SINGLE FREQUENCY GREEN LASER
Ordering Information
For more information on this or other products and their availability, please contact your local JDSU account manager or
JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at
customer.service@jdsu.com.
Sample: 142H-532-100 (532 nm, 100 mW laser head) and 142-OPN-PS-A (standard power supply)
Laser Head
Product Code
142H-532-100
142H-532-200
142H-532-300
142H-532-400
142H-532-500
142H-532-100 SF
Description
NPRO 142 frequency-doubled, 532 nm, 100 mW laser head
NPRO 142 frequency-doubled, 532 nm, 200 mW laser head
NPRO 142 frequency-doubled, 532 nm, 300 mW laser head
NPRO 142 frequency-doubled, 532 nm, 400 mW laser head
NPRO 142 frequency-doubled, 532 nm, 500 mW laser head
NPRO 142 frequency-doubled, 532 nm, 100 mW, SF option includes
linewidth spec of <10 kHz/msec laser head
142H-532-200 SF
142H-532-300 SF
142H-532-400 SF
142H-532-500 SF
NPRO 142 frequency-doubled, 532 nm, 200 mW, SF option includes
linewidth spec of <10 kHz/msec laser head
NPRO 142 frequency-doubled, 532 nm, 300 mW, SF option includes
linewidth spec of <10 kHz/msec laser head
NPRO 142 frequency-doubled, 532 nm, 400 mW, SF option includes
linewidth spec of <10 kHz/msec laser head
NPRO 142 frequency-doubled, 532 nm, 500 mW, SF option includes
linewidth spec of <10 kHz/msec laser head
Power Supply
Product Code
Description
142-OPN-PS-A
Standard power supply
Safety Label
All statements, technical information and recommendations related to the products herein are based upon information believed to be
reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any
inaccuracies. The user assumes all risks and liability whatsoever in connection with the use of a product or its application. JDSU reserves
the right to change at any time without notice the design, specifications, function, fit or form of its products described herein, including
withdrawal at any time of
a product offered for sale herein. JDSU makes no representations that the products
herein are free from any intellectual property claims of others. Please contact JDSU for more information. JDSU and the JDSU logo are
trademarks of JDS Uniphase Corporation. Other trademarks are the property of their respective holders. ©2006 JDS Uniphase
Corporation. All rights reserved. 10143150 Rev. 001 01/06 NRPRO142.DS.CL.AE
NORTH AMERICA: 800 498-JDSU (5378)
WORLDWIDE: +800 5378-JDSU
WEBSITE: www.jdsu.com
相关型号:
©2020 ICPDF网 联系我们和版权申明