RMDM-15SH003L-A174 [ITT]

D Microminiature Connector, 15 Contact(s), Female, Receptacle, ROHS COMPLIANT;


型号：	RMDM-15SH003L-A174
厂家：	ITT Cannon
描述：	D Microminiature Connector, 15 Contact(s), Female, Receptacle, ROHS COMPLIANT 连接器
文件：	总2页 (文件大小：1984K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Micro-D Coaxial/Power - .050" Contact Spacing

MDM C/P

MDM Coaxial

MDM Power

The MDM Metal Shell Connectors have been

tooled in several coaxial layouts and offer the

versatility of combining coaxial and signal lines

in the same connector. Any modiﬁcations to

these layouts or new requirements, please con-

sult the factory. Standard coax is RG178 white.

The same insulator that is used with coaxial contacts is

available with power contacts. This offers the versatility

of combining power and signal lines in the same connec-

tor.

MDM Coaxial/Power

Power and coaxial contacts can be interchanged as

desired. Power contacts are rated at 13 amps, 24V rms,

AWG #16 stranded.

For MIL-DTL-83513 ordering information see pages 16 and 17

RoHS COMPLIANCE

MDM

001

- XXX

SERIES

MDM: (Size 9-100) Liquid Crystal Polymer (LCP)

CONTACT ARRANGEMENTS

MDM: (Combo Layout) Diallyl Phthalate (DAP)

CONTACT TYPE

CONTACT ARRANGEMENTS

9-15-21-25-31-37-51-100 (standard)

TERMINATION TYPE

16C5, 10C10, 7C2, 24C4 (coaxial)

16P5, 10P10, 7P2, 24P4 (power)

TERMINATION CODE

HARDWARE

or combination of

coax and power

}

SHELL FINISH MOD CODES

CONTACT TYPE

P - Pin

S - Socket

(L) 1 - 1/2" uninsulated solid #25

AWG gold plated copper.

(L) 2 - 1" uninsulated solid #25 AWG

gold plated copper.

F - Float mount

B - No hardware standard

.091 (2.31) dia. hole for sizes 9-51;

.120 (3.05) dia. hole for size 100.

A - .125 (3.18) dia. mounting holes for sizes 9-51;

.166 (4.22) dia. hole for size 100.

B1 - .1475 (3.75) dia. hole for size 100

(Per MIL-DTL-83513)

TERMINATION TYPE

H - Harness-insulated wire.

L - Solid-uninsulated wire.

S - Solder pot to accept #26 AWG MAX.

harness wire. (Not available with power

contact arrangements.)

SHELL FINISH MOD CODES

No Number - (Standard cadmium/yellow

chromate over nickel

A174 - Electroless nickel

A172 - Gold over nickel

A141 - Irridite/alodine

HARDWARE

TERMINATION CODE*

M - Military specification hardware, see

page 11 for military hardware codes.

P - Jackpost

K - Jackscrew-standard profile

L - Jackscrew-low profile

(H) 001 - 18",7/34 strand,#26 AWG,

MIL-W-16878/4, Type E Teflon, yellow.

(H) 003 - 18", 7/34 strand, #26 AWG,

MIL-W-16878/4, Type E Teflon,

color coded to MIL-STD-681 System I.

A30 - Black anodize

*See pages D-98 to D-102 for additional Termination codes.

7C2/7P2

.186 (4.92) MAX.

.199 (5.05) MAX.

1.185 (30.10) MAX.

308 (7.82)

.965 ± .005

(24.51 ± 0.13)

MAX

(24.51 ± 0.13)

.416 (10.57)

MAX.

.429 (10.90)

MAX.

.308 (7.82) MAX.

.100

(2.54)

MAX.

.100

(2.54)

MAX.

.800

(20.32)

MAX.

.800

(20.32)

MAX.

.091 ± .003

(2.31 ± 0.08)

.091 ± .003

(2.31 ± 0.08)

DIA.

Plug

Receptacle

24C4/24P4

.186 (4.92)

MAX.

.199 (5.05)

MAX.

1.435 (36.45) MAX.

1.215 ± .005

(30.86 ± 0.13)

1.215 ± .005

(30.86 ± 0.13)

.351 (8.92)

MAX.

.351 (8.92)

MAX.

.100

(2.54)

MAX.

.429 (10.90)

MAX.

.416 (10.51)

MAX.

.100

(2.54)

MAX.

1.050

(26.67)

MAX.

.091 ± .003

(2.31 ± 0.08)

.091 ± .003

(2.31 ± 0.08)

DIA.

1.050

(26.67)

MAX.

Plug

Receptacle

Power Contacts

Coaxial Contacts

BACK POTTING

REQUIRED

.350 (8.89)

MAX.

Plug

Receptacle

Plug

Receptacle

Dimensions shown in inches (mm)

Speciﬁcations and dimensions subject to change

www.ittcannon.com

D-24

相关型号：