DB51213 [ITT]
Defining and Champooning Innivation; 定义和Champooning Innivation型号: | DB51213 |
厂家: | ITT Cannon |
描述: | Defining and Champooning Innivation |
文件: | 总28页 (文件大小:2464K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Cannon, VEAM, BIW
A Historical Achievement of Technology Leadership
Defining and Championing Innovation
Showcasing a portfolio of creativity, ITTʼs “Engineered For Life” execution embraces products which have be-
come ubiquitous in a broad collection of markets including: Military/Aerospace, Civil Aircraft, Industrial Instru-
mentation, Medical, Oil & Gas, Energy, Transportation, Telecom/Handset, Computer, Consumer, and
Automotive.
ITTʼs rich interconnect history embraces contributions to both technological breakthroughs and social move-
ments. With one of the industryʼs broadest product offerings, ITTʼs interconnect products have supported:
•
•
•
•
•
•
•
Every Free World space mission, bringing the universe to our doorstep.
Motion picture, radio, and television equipment, serving laughter and entertainment to millions.
Commercial and military communications systems, linking the voices of the world.
Computerized tools, reshaping the information highway.
Aircraft, rapid transit, and automobiles, mobilizing our expanding society.
Oil and natural gas production, powering the worldʼs economies.
Agricultural equipment, attacking the roots of world hunger.
First
Cannon pioneers
sound and film
connectors with
the M Series
Cannon creates Cannon originates Cannon develops
Cannon establishes
“Cannon Plug”
4 Pole Power
Connector
Cannon creates
“K” series
“AN” military
plugs
the first “D-Sub” the first “Micro” an aviation milestone
+2000
connectors
connectors
through the expansion
of Rack and Panel
connectors with the
BKAD/E Series
connectors for
DC-1’s
Cannon develops
the first
Cannon pioneers Cannon partners
guided missle
umbilical
with technology
leaders to develop
the first complete
fiber optic
Breakaway
The first commercial and power connectors
The first aviation
circular & rack
Tri-Service
connector, the
connectors
1980
Cannon connectors made possible the first
radio microphones, the first black and white
television cameras as well as the first
color television equipment.
panel connectors mother of modern
Technology
Leadership
developed by
Cannon
day military
spec’s
systems
Chip-on-Flex
PHD
Lean
Cannon’s AF
Cannon’s
1970
manufacturing
Firewall connectors X connector is the
used in early
first microminiature
audio connector
Internet deployed
systems
DC-3 transports
1960
Cannon
founded by
James Cannon
Pioneering
Quadrax
1950
technologies
Cannon’s first entry
into the Medical
1940
Engineered
solutions
1930
Electronics market
1915
1920 Photo courtesy of The Academy of
Stacking
Motion Pictures, Arts and Sciences.
The
Power, Film,
Aviation
Military
Charting
Space
Telecom
Growth
Medical,
Beginning
the Future
Transportation
Commercial
www.ittcannon.com
Cannon D Subminiature Accessories
Table of Contents
Description
D Subminiature Accessories
Accessory Selection Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
Metal Backshell
•
Die Cast Zinc, EMI Shielded Straight Exit . . . . . . . . . . . . . . . . . . . . 4
Metal Backshell Straight Exit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Metal Backshell 45° Exit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8
Plastic Backshell
•
Snap-Together Metalized Plastic, EMI Shielded . . . . . . . . . . . . . . . 9
Locking Hardware for Snap-Together Plastic Backshell. . . . . . . . . 10
Low Cost Metalized Plastic, Straight Exit . . . . . . . . . . . . . . . . . . . 10
Snap-Together Universal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
One-Piece Snap-Together . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
One-Piece Straight Exit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
One-Piece Plastic, 90° Exit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Locking Hardware
•
Screw Lock Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-14
Slide Lock Assemblies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Spring Latch Assemblies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Jackscrew/Jackpot Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Guide Pin Plate
•
Female Guide Pin Plate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Male Guide Pin Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Connector Saver
•
High Reliability Connector Saver . . . . . . . . . . . . . . . . . . . . . . . . . 20
Miscellaneous
•
Polarizing Plates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Right Angle Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Wire Hole Fillers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Dust Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Interfacial Seal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Potting Shell. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Part Number Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Product Safety Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
www.ittcannon.com
D Cannon D-Subminiature Accessories
Selection Guide
Locking Hardware
Sliding Lock
Female Screw Lock
see page 14
Male Screw Lock
see page 13
Retainer
Slide Lock Post
see page 15
Spring Latch Plate
see page 16
Spring Latch
see page 16
Backshell
Style
see page 15
EMI Shielded
Snap-Together
Metalized Plastic
Straight Exit
—
—
—
—
—
—
see page 9
EMI Shielded
Snap-Together
Metalized Plastic
50º Exit
—
—
—
•
—
L
—
•
—
—
—
•
—
—
—
•
—
—
—
•
—
—
—
•
see page 9
EMI Shielded
Metal
Die Cast Zinc
Metal
see page 4
Metal Backshell
45º Exit
see page 4
Metal
Deep Straight
Clamp
see page 7
Metal
Round Cable
Clamp
see page 7
•
•
•
•
•
•
Metal
Short Straight
Clamp
•
•
•
•
•
•
•
•
•
•
•
•
see page 8
Metal
90º Entry
see page 8
Plastic
Snap-Together
Universal
•
•
—
—
•
—
—
•
—
—
•
—
—
•
see page 11
Plastic
Plastic
Plastic
One-Piece
Snap-Together
see page 11
—
—
—
L
—
—
One-Piece Plastic
Straight Exit
see page 12
One-Piece Plastic
90º Exit
see page 12
•
•
•
•
L Supplied with backshell
• Optional compatible locking hardware
— Not compatible
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
2
D Cannon D-Subminiature Accessories
Selection Guide
Locking Hardware
Jackpost for
In-Line Connections
see page 10
Jackscrew Assembly Jackpost Assembly
Recessed Jackscrew Extended Jackscrew
Thumbscrew
see page 10
see page 17
see page 17
see page 10
see page 10
—
—
•
•
•
•
—
—
—
—
—
—
—
—
•
•
•
•
•
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
•
—
—
•
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
3
D Cannon D-Subminiature Accessories
Metal Backshell
Die Cast Zinc Backshell, Straight Exit, EMI Shielded
9 and 15
Position
25
Position
37 and 50
Position
C
C
B
B
B
A
D
A
D
A
D
E Dia.
E Dia.
E Dia.
F
F
F
Die cast metal backshells reduce EMI/RFI emis-
sions. Die cast metal backshells offer improved
shielding in a rugged package.
Shell
Size Layout
Part
Number
A
B
C
D
øE
F
±±0,1 (.±±5) ±±0,1 (.±±5) ±±0,1 (.±±5) ±±0,1 (.±±5) ±±0,1 (.±±5) ±±0,1 (.±±5)
DE
DA
DB
DC
DD
9
980-2000-345 31,12 (1.225) 37,21 (1.465) 15,75 (.620) 15,75 (.620) 10,16 (.400) 24,99 (.984)
980-2000-346 39,12 (1.540) 40,64 (1.600) 15,75 (.620) 15,75 (.620) 10,16 (.400) 33,32 (1.312)
980-2000-347 53,09 (2.090) 39,37 (1.550) 17,53 (690) 15,75 (.620) 13,34 (.525) 47,17 (1.857)
980-2000-348 69,34 (2.730) 45,72 (1.800) 21,95 (.864) 15,75 (.620) 18,44 (.726) 63,50 (2.500)
980-2000-349 66,70 (2.626) 45,72 (1.800) 21,95 (.864) 18,54 (.730) 18,44 (.726) 61,11 (2.406)
15
25
37
50
Product Features
• Improves conformance to FCC DOC
#20780 shielding requirements
• No crimp ferrule tooling needed
• Kit consists of 1 front shell, 1 rear shell,
2 screws, 2 hex nuts, 2 mounting screws,
2 end brackets, 1 set of compression
inserts
Specifications
Attenuation:
Temperature Range:
Materials and Finishes
Backshell Material:
Backshell Finish:
-50 dB @ 1000MHz
-20º C to 80º C
Zinc
Clear Zinc
Compression Inserts: PVC
Hardware Material:
Hardware Finish:
Steel
Clear Zinc
Attenuation
Diecast Shell Shielding Performance
0
-10
-20
-30
db
-40
-50
-60
-70
1000
100
Mhz
Compression inserts (included with die cast zinc metal backshell)
Compression inserts accommodate a wide variety
9 and 15 Position*
25 Position*
1
37 and 50 Position*
of cable sizes.
1
2
3
6
1
5
2
Position
Cable Diameter
3
5
9,15
25
37,50
4,83/8,89 (.190/.350)
4,83/11,68 (.190/.460)
7,62/17,27 (.300/.680)
3
4
2
4
4
5
* Inserts may be supplied mirror image.
#,
#2
#1
#4
#5
#6
Position
9,15
O.D.
I.D.
8,13 (.320)
O.D.
I.D.
O.D.
I.D.
O.D.
I.D.
7,24 (.285)
O.D.
I.D.
O.D.
—
I.D.
—
12,07 (.475)
9,14 (.360)
8,00 (.315) 9,14 (.360)
6,48 (.255) 9,14 (.360)
9,14 (.360) 5,33 (.210)
25
15,24 (.600) 11,43 (.450) 11,43 (.450) 10,41 (.410) 11.43 (.450) 9,40 (.370) 11.43 (.450) 7,62 (.300) 11.43 (.450) 5,84 (.230)
—
—
37.50
16,64 (.655) 14,48 (.570) 17,78 (.700) 15,75 (.620) 20,57 (.810) 16,51 (.650) 16,64 (.655) 12,70 (.500) 16,64 (.655) 10,80 (.425) 16,64 (.655) 8,89 (.350)
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
4
Metal Backshell
D Cannon D-Subminiature Accessories
Metal Backshell Straight Exit
The new Cannon Metal Backshells D*FM series for D-Subminiature Connectors offers protection from
magnetic and radio interferences to cable assemblies.
This backshell series is characterized by simple assembly and fit for ndustrial and telecom applications.
Product Features:
•
•
•
No crimp ferrule tooling needed
Material: Zinc, blue chromated
Unique metal filled plastic cable strain relief
guarantees 360° shielding
RoHS compliant
Size 15
•
•
•
-40 - +120°C temperature range
Corrosion resistant
Part Description Part Description
With #4-40 UNC
With M3
Shell
Size
A
B
C
D
Cable
Jackscew
Jackscrew
Diameter
DEFME-101
DEFMX-101
Size
9
Size 15
Size 25
Size 37
39,55mm [1.555inch]
41,7mm [1.642inch]
49,0mm [1.929inch]
53,3mm [1.098inch]
31,3mm [1.232inch]
39,3mm [1.547inch]
53,5mm [2.106inch]
69,7mm [2.744inch]
14,6mm [0.575inch] 25,0mm [0.984inch]
14,6mm [0.575inch] 33,3mm [1.311inch]
14,6mm [0.575inch] 47,0mm [1.850inch]
14,6mm [0.575inch] 63,5mm [2.500inch]
4 - 9mm
DAFME-101
DBFME-101
DCFME-101
DAFMX-101
DBFMX-101
DCFMX-101
4 - 9mm
4 - 9mm
4 - 9mm
Kit consists of 1 front shell, 1 rear shell, 4 strain reliefs, 2 mounting crosshead screws, and 2 jack screws.
Assembly instructions Size 9, 15, 25, 37
Attenuation curve
Use two halves of strain relief
(different sizes can be mixed)
Attach the strain relief around
Strip cable 18mm and shape
cable to two pigtails
the cable
Bend cable shielding back on
outside of strain relief
Mount connector and cable into
the backshell
Assemble the other half
(screwing force: 100-120 Ncm)
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
5
D Cannon D-Subminiature Accessories
Metal Backshell
Metal Backshell 45° Exit
The new Cannon Metal Backshells D*FM series for D-Subminiature Connectors offers protection from
magnetic and radio interferences to cable assemblies.
This backshell series is characterized by simple assembly and fit for Industrial and telecom applications.
Product Features:
Size 15
•
•
•
No crimp ferrule tooling needed
Material: Zinc, blue chromated
Unique metal filled plastic cable strain relief
guarantees 360° shielding
RoHS compliant
•
•
•
-40 - +120°C temperature range
Corrosion resistant
Size 50
Part Description Part Description
With #4-40 UNC
With M3
Shell
A
B
C
D
Cable
Jackscew
Jackscrew
Size
Diameter
DEFME-100
DEFMX-100
Size 9*
37,5mm [1.476inch]
41,5mm [1.634inch]
41,5mm [1.634inch]
41,5mm [1.634inch]
45,0mm [1.772inch]
35,5mm [1.398inch]
39,5mm [1.555inch]
53,5mm [2.106inch]
70,0mm [2.756inch]
67,5mm [2.657inch]
14,6mm [0.575inch]
4 - 9mm
DAFME-100
DBFME-100
DCFME-100
DDFME-100
DAFMX-100
DBFMX-100
DCFMX-100
DDFMX-100
Size 15**
Size 25**
Size 37**
Size 50***
14,6mm [0.575inch] 33,3mm [1.311inch]
14,5mm [0.571inch] 47,0mm [1.850inch]
14,5mm [0.571inch] 63,5mm [2.500inch]
4 - 9mm
4 - 9mm
4 - 9mm
13-16mm
17,4mm [0.69inch]
61,0mm [2.402inch]
*Size 9 Backshell: Kit consists of 1 front shell, 1 rear shell, 4 strain reliefs, 2 mounting crosshead screws, 1 jack screw
**Size 15, 25, 37 Backshell: Kit consists of 1 front shell, 1 rear shell, 4 strain reliefs, 2 mounting crosshead screws, 2 jack screws
***Size 50 Backshell: Kit consists of 1 front shell, 1 rear shell, 1 cable clamp, 4 mounting crosshead screws, 2 jack screws
Assembly instructions Size 9, 15, 25, 37
Attenuation curve
Use two halves of strain relief
(different sizes can be mixed)
Attach the strain relief around
the cable
Strip cable 18mm and shape
cable to two pigtails
Bend cable shielding back on
outside of strain relief
Mount connector and cable into
the backshell
Assemble the other half
(screwing force: 100-120 Ncm)
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
6
Metal Backshell
D Cannon D-Subminiature Accessories
Metal Backshell
Metal Backshells provide strain relief.
Materials and Finishes
Various profiles available for different cable rout-
ing requirements.
Backshell Material:
Backshell Finish:
Hardware Material:
Low Carbon Steel or Brass
Chromate over Cadmium (Mil Spec) or Zinc (RoHS)
Steel
Product Features
Qualified to MIL-Spec M85049
E
Deep Straight Clamp
CABLE ENTRY
IN SHELL
B
H MAX.
G
F
0,38 0,13
(.015 .005)
C
A
D MAX.
CABLE ENTRY
IN SHELL
3,45 0,13
(.136 .005)
TWO MTG. HOLES
Mil-Spec Parts (Brass)
Brass
Shell RoHS Compliant
Mil-Spec
5± µ in. Gold
over Copper
DE24657-16
DA24658-15
DB24659-15
DC24660-16
DD24661-13
Size
DE
Part Number
DE24657-29
DA24658-28
DB24659-27
DC24660-27
DD24661-27
Part Number
Part Number
DE24657-5
DA24658-2
DB24659-2
DC24660-11
DD24661-4
M85049/48-1-6F
M85049/48-1-7F
M85049/48-1-8F
M85049/48-1-9F
M85049/48-1-10F
DA
• Kit consists of 1 shell, 2 cable clamps,
2 screws, 2 hex nuts.
DB
DC
DD
Shell
Part
Mil Spec
A
B
C
D
max.
14,68 (.578)
E
F
G
H
max.
Size Layout Number Part Number* ±±0,3 (.±15)
±±05ꢀ7 (.±775) ±±0,3 (.±15)
12,484 (.4915) 24,99 (.984)
12,484 (.4915) 33,32 (1.312) 14,68 (.578)
12,484 (.4915) 47,04 (1.852) 14,68 (.578) 25,40 (1.000)
12,484 (.4915) 63,50 (2.500) 14,68 (.578) 34,93 (1.375)
15,253 (.6005) 61,11 (2.406) 17,45 (.578) 35,71 (1.406) 10,31 (.406)
±±0,3 (.±15) ±±0,3 (.±15)
9,53 (.375)
18,11 (.713)
±±0,3 (.±15)
DE
DA
DB
DC
DD
9
DE24657 M85049/48-1-1F 30,56 (1.203)
DA24658 M85049/48-1-2F 38,89 (1.531)
DB24659 M85049/48-1-3F 52,78 (2.078)
DC24660 M85049/48-1-4F 69,04 (2.718)
DD24661 M85049/48-1-5F 66,68 (2.625)
9,53 (.375)
7.93 (.312)
7.93 (.312)
7.93 (.312)
19,05 (.750) 31,75 (1.250)
19,05 (.750) 31,75 (1.250)
25,40 (1.000) 39,70 (1.563)
25,40 (1.000) 39,70 (1.563)
28,57 (1.125) 42,88 (1.688)
15
25
37
50
* Parts ordered with no suffix or “Z” suffix will be substituted with “F” suffix.
Round Cable Clamp
3,05 ,013
(.120 .005) DIA.
TWO MTG. HOLES
A
C
E
G
F
D MAX.
CABLE ENTRY
+
+
B
0,38 0,13
(.015 .005)
Mil-Spec Parts (Brass)
Brass
• Kit consists of 1 shell, 2 cable clamps,
2 screws, 2 hex nuts.
Shell RoHS Compliant
Mil-Spec
5± µ in. Gold
over Copper
DE44994-2
DA20961-16
DB20962-18
DC20963-17
DD20964-19
Size
DE
Part Number
DE44994-14
DA20961-26
DB20962-30
DC20963-27
DD20964-32
Part Number
Part Number
DE44994-3
DA20961-3
DB20962-8
DC20963-8
DD20964-8
M85049/48-2-6F
M85049/48-2-7F
M85049/48-2-8F
M85049/48-2-9F
M85049/48-2-10F
DA
DB
DC
DD
Shell
Size
DE
DA
DB
DC
DD
Part
Mil Spec
A
B
C
D
max.
E
F
G
Layout Number
Part Number*
M85049/48-2-1F
M85049/48-2-2F
M85049/48-2-3F
M85049/48-2-4F
M85049/48-2-5F
±±0,3 (.±15)
30,68 (1.208)
38,89 (1.531)
52,78 (2.078)
69,04 (2.718)
66,68 (2.625)
±±05ꢀ7 (.±775)
12,70 (.500)
12,70 (.500)
12,70 (.500)
12,70 (.500)
15,47 (.609)
±±0,3 (.±15)
24,99 (.984)
33,33 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
±±0,3 (.±15)
16,79 (.661)
24,99 (.984)
38,48 (1.515)
55,14 (2.171)
53,16 (2.093)
±±0,3 (.±15)
3,18 (.125)
3,18 (.125)
4,75 (.187)
6,35 (.250)
7,92 (.312)
±±0ꢀꢁ (.±,±)
26,18 (1.031)
26,18 (1.031)
26,98 (1.062)
26,98 (1.062)
26,98 (1.062)
9
DE44994
DA20961
DB20962
DC20963
DD20964
10,31 (.406)
10,31 (.406)
15,06 (.593)
18,23 (.718)
20,62 (.812)
15
25
37
50
* Parts ordered with no suffix or “Z” suffix will be substituted with “F” suffix.
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
7
D Cannon D-Subminiature Accessories
Metal Backshell
Short Straight Clamp
A
C
B
G
12,30 0,38
(.484 .015)
F
3,05 0,13 (.120 .005) DIA.
(TYP.)
E
TWO MTG. HOLES
CABLE
ENTRY
0,38 0,13
(.015 .005)
• Kit consists of 1 shell, 2 or 3 screws,
2 or 3 hex nuts
Mil-Spec Parts (Brass)
Mil-Spec
Brass
Shell RoHS Compliant
5± µ in. Gold
over Copper
DA19678-167
DA19678-168
DA19678-138
DA19678-161
Size
DA
Part Number
DA19678-212
DB19678-213
DC19678-214
DD19678-214
Part Number
M85049/48-3-7F
M85049/48-3-8F
M85049/48-3-9F
M85049/48-3-10F
Part Number
DA19678-38
DB19678-53
DC19678-85
DD19678-55
DB
DC
DD
No. of
Cable Locking
Shell
Part
Mil Spec
A
B
C
E
F
G
Size Layout
Number
Part Number* Screws Included
±±0,3 (.±15)
38,88 (1.531)
52,78 (2.078)
69,04 (2.718)
66,68 (2.625)
±±0,3 (.±15)
12,70 (.500)
12,70 (.500))
12,70 (.500)
15,47 (.690)
±±01, (.±±5)
33,33 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
±±0,3 (.±15)
7,51 (.296)
7,51 (.296)
7,51 (.296)
9,91 (.390)
±±0,3 (.±15)
7.93 (.312)
20,22 (.796)
17,45 (.687)
17,45 (.687)
±±0ꢀ3 (.±,5)
16,36 (.644)
16,36 (.644)
16,36 (.644)
17,63 (.694)
DA
DB
DC
DD
15
25
37
50
DA19678-1 M85049/48-3-2F
DB19678-2 M85049/48-3-3F
DC19678-3 M85049/48-3-4F
DD19678-4 M85049/48-3-5F
2
2
3
3
* Parts ordered with no suffix or “Z” suffix will be substituted with “F” suffix.
90º Entry
E
#4-40
CABLE ENTRY
NC-2B THD.
TWO MTG. HOLES
A
2,77 0,25
(.109 .010)
B
F
CABLE
G
ENTRY
H
C
• Kit consists of 1 shell, 1 cable clamp, 1
screw,
1 nut, 2 rivnuts (assembled)
Mil-Spec Parts (Brass)
Brass
Shell RoHS Compliant
Mil-Spec
5± µ in. Gold
over Copper
DE19977-47
DE19977-40
DE19977-43
DE19977-45
DE19977-44
Size
DE
Part Number
DE19977-72
DA19977-68
DB19977-69
DC19977-70
DC19977-71
Part Number
M85049/50-6F
M85049/50-7F
M85049/50-8F
M85049/50-9F
M85049/50-10F
Part Number
DE19977-20
DA19977-6
DB19977-17
DC19977-18
DD19977-19
DA
DB
DC
DD
Shell
Size Layout
Part
Number
Mil Spec
A
B
C
E
F
G
H
Part Number*
M85049/50-1F
M85049/50-2F
M85049/50-3F
M85049/50-4F
M85049/50-5F
±±0,3 (.±15)
30,56 (1.203)
38,89 (1.531)
52,78 (2.078)
69,04 (2.718)
66,68 (2.625)
±±0,3 (.±15)
18,24 (.718)
12,70 (.500)
12,70 (.500))
12,70 (.500)
15,47 (.690)
±±01, (.±±5)
24,99 (.984)
33,33 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
±±0,3 (.±15)
11,10 (.437)
11,10 (.437)
11,10 (.437)
11,10 (.437)
14,28 (.562)
±±0,3 (.±15)
11,10 (.437)
11,10 (.437)
15,88 (.625)
20,63 (.812)
23,01 (.906)
±±0ꢀ3 (.±,5)
11,89 (.468)
11,89 (.468)
11,89 (.468)
11,89 (.468)
13,47 (.531)
DE
DA
DB
DC
DD
9
DE19977-5
DA19977-1
DB19977-2
DC19977-3
DD19977-4
7,14 (.281)
7,14 (.281)
7,14 (.281)
7,14 (.281)
8,71 (.343)
15
25
37
50
* Parts ordered with no suffix or “Z” suffix will be substituted with “F” suffix.
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
8
Plastic Backshell
D Cannon D-Subminiature Accessories
Snap-Together Metalized Plastic
Metalized plastic backshells reduce EMI/RFI emis-
sions. Metalized plastic provides a light weight solu-
tion. Includes integral strain relieving cable clamp.
CABLE
CABLE
CLAMP
GROUNDING
TANG
Product Features
• Improves conformance to FCC DOC #20780
shielding requirements
• No crimp ferrule tooling needed
• Quick and simple assembly using snap-
together design feature
• Non-metalized, non-shielded versions available
Attenuation Curve
Note: Cable grounding tang not available on DE size backshell.
dB
Materials and Finishes
Specifications
Material:
Finish:
Thermoplastic, UL 94V-0 rated
Nickel over Copper
Attenuation:
Temperature Range:
-49 dB @ 100MHz
-20º C to 80º C
kHz
MHz
MHz
MHz
Straight Exit
C
D
ØH
MAX
• Kit consists of 1 front
shell, 1 rear shell, 1 cable
clamp, 2 screws
E
• Optional locking hardware
sold separately, see page 10
16,99 0,30
(.669 .012)
A
B
Shell
Comptuer Cable
Ribbon Cable
A
B
C
D
E
øH
Max.
Size Layout Shielded
Non-Shielded Gray Non-Shielded Black
Shielded
Non-Shielded Gray
0,15 (.006)
0,ꢀ0 (.012)
0,ꢀ0 (.012) 0,ꢀ0 (.120)
0,20 (.008)
DE
DA
DB
DC
DD
9
DE12107ꢀ-154 DE12107ꢀ-159
DE12107ꢀ-259
DA12107ꢀ-255
DB12107ꢀ-256
DC12107ꢀ-257
DD12107ꢀ-258
DE12107ꢀ-164 DE12107ꢀ-169
DA12107ꢀ-160 DA12107ꢀ-165
DB12107ꢀ-161 DB12107ꢀ-166
DC12107ꢀ-162 DC12107ꢀ-167
24,95 (.982) ꢀ0,81 (1.21ꢀ) 2ꢀ,70 (.9ꢀꢀ) 16,00 (.6ꢀ0) ꢀ5,99 (1.417) 7,ꢀ2 (.288A
ꢀꢀ,ꢀ0 (1.ꢀ11) ꢀ9,09 (1.5ꢀ9) ꢀ1,80 (1.252) 16,00 (.6ꢀ0) 42,00 (1.654) 8,ꢀ1 (.ꢀ27)
47,00 (1.850) 5ꢀ,01 (2.087) 45,01 (1.772) 16,00 (.6ꢀ0) 42,00 (1.654) 10,52 (.414)
6ꢀ,45 (2.498) 69,29 (2.728) 60,ꢀ0 (2.ꢀ74) 16,00 (.6ꢀ0) 42,00 (1.654) 12,ꢀ2 (.485)
61,10 (2.410) 66,90 (2.6ꢀ4) 58,ꢀ0 (2.295) 19,00 (.748) 42,00 (1.654) 1ꢀ,00 (.512)
15 DA12107ꢀ-150 DA12107ꢀ-155
25 DB12107ꢀ-151 DB12107ꢀ-156
ꢀ7 DC12107ꢀ-152 DC12107ꢀ-157
50 DD12107ꢀ-15ꢀ DD12107ꢀ-158
-
-
50º Exit
D
E
Shell
Size Layout
Shielded
Part #
Non-Shielded
Part # Gray
B
C
D
E
Cable Diameter
Min. Max.
0,ꢀ0 (.012)
0,ꢀ0 (.012)
0,ꢀ0 (.012)
0,20 (.008)
DE
DA
DB
DC
DD
9
DE12107ꢀ-54 DE12107ꢀ-59 ꢀ5,99 (1.417) 22,00 (8.66) 16,00 (.6ꢀ0) ꢀ5,99 (1.417)
DA12107ꢀ-50 DA12107ꢀ-55 44,29 (1.744) 27,ꢀ1 (1.075) 16,00 (.6ꢀ0) 42,01 (1.654)
DB12107ꢀ-51 DB12107ꢀ-56 57,99 (2.28ꢀ) 41,00 (1.614) 16,00 (.6ꢀ0) 42,01 (1.654)
DC12107ꢀ-52 DC12107ꢀ-57 74,50 (2.9ꢀꢀ) 57,51 (2.264) 16,00 (.6ꢀ0) 42,01 (1.654)
DD12107ꢀ-5ꢀ DD12107ꢀ-58 72,97 (2.87ꢀ) 54.99 (2.165) 19,00 (.748) 42,01 (1.654)
ꢀ,51 (.1ꢀ8) 7,49 (.295)
6,50 (.256) 8,99 (.ꢀ54)
6,50 (.256) 11,00 (.4ꢀꢀ)
6,50 (.256) 11,00 (.4ꢀꢀ)
8,99 (.ꢀ54) 1ꢀ,00 (.512)
15
25
ꢀ7
50
• Kit consists of 1 front shell,
1 rear shell, 1 cable clamp,
2 screws
• Optional locking hardware sold
separately, see page 5
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
9
D Cannon D-Subminiature Accessories
Plastic Backshell
Locking Hardware for Snap -Together Plastic Backshell
Recessed Jackscrew
Extended Jackscrew
Thumbscrew
13,50 (.531)
19,00 (.748)
4,30
9,00
(.354)
9,00
50,00 (1.969)
4,30 (.169)
(.169)
(.354)
9,00 (.354)
6,00 (.236)
#4-40
#4-40
#4-40
Threads
Threads
4,50
(.177)
DIA.
THREADS
6,00
(.236)
MIN.
6,00
(.236)
MIN.
4,10
(.161)
DIA.
Materials and Finishes
Part Number
Material
Finish
Quantity Required
per Connector
250-8501-004
250-8501-009 (M3) ,250-8501-010 (#4-40)
250-8501-013
Brass
Brass
Brass
Nickel
Nickel
Nickel
2
2
2
Jackpost for In-Line Connections
Jackpost Assembly
Rectangular Nut
Jackpost
11,00
(.433)
5,00
4,90 (.193)
(.197)
3,00 (.118)
MIN
6,00
(.236)
4,60
5,00
(.189)
(.197)
#4-40 UNC-2B
1,81
#4-40 UNC-2B
#4-40 UNC-2A
(.075)
5,00
6,00
(.197)
(ACROSS FLATS)
(.236)
Assembly consists of 1 rectangular nut,
1 jackpost, 1 # 4-40 lock washer.
Part Number:
Material:
D121073-19
Brass
Finish:
Nickel
Quantity required
per connector:
2
50 POSITION IS MARKED
“CANNON” ONLY
C
D
Straight Exit - Metalized Plastic Low Cost
F
B
ITT CANNON
ØE
A
Shell
Size Layout
Part
Number
A
B
C
D
ø E
F
DE
DA
DB
DC
DD
9
980-2000-350 30,91 (1.217) 39,29 (1.547) 16,26 (.640) 16,26 (.640) 10,16 (.400) 24,99 (.984)
980-2000-351 39,24 (1.545) 38,23 (1.505) 16,26 (.640) 16,26 (.640) 10,16 (.400) 33,32 (1.312)
980-2000-352 53,09 (2.090) 42,04 (1.655) 18,03 (.710) 16,26 (.640) 13,26 (.522) 47,17 (1.857)
980-2000-353 69,44 (2.734) 46,48 (1.830) 23,01 (.906) 16,26 (.640) 18,44 (.726) 63,50 (2.500)
980-2000-354 67,18 (2.645) 47,12 (1.855) 23,88 (.940) 19,56 (.770) 18,44 (.726) 61,11 (2.406)
• Kit consists of 1 front shell, 1 rear shell,
1 cable clamp, 2 screws
15
25
37
50
Materials and Finishes: Thermoplastic, UL 94V-0 rated, Nickel plated
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
10
Plastic Backshell
D Cannon D-Subminiature Accessories
Snap -Together Universal
42,50
(1.673).
B DIA. MAX.
CABLE ENTRY
39,50
(1.555).
C
D
Shell
Size
DE
DA
DB
DC
DD
Part
Number
øB
max.
C
D
Layout
9
15
25
37
50
±±0,± (.±±8)
17,00 (.669)
17,00 (.669)
17,00 (.669)
17,00 (.669)
19,81 (.780)
±±0,± (.±±8)
19,51 (.768)
27,79 (1.094)
41,61 (1.638)
59,99 (2.283)
52,32 (2.060)
DE115339-20
DA115339-21
DB115339-22
DC115339-23
DD115339-24
7,01 (.276)
9,60 (.378)
11,61 (.457)
13,00 (.512)
16,00 (.630)
• 2-piece snap-together design for quick
assembly.
• Customer furnishes tie-wrap.
Note: Part Numbers above replace the following part number series: DE110963-1 to DD110963-5
Materials and Finishes
Material:
Black Thermoplastic,
UL 94V-0 rated
One-Piece Snap-Together
A
C
16,21
(.638)
48,00
(1.890)
E
CLAMP,
THERMOPLASTIC
ITT CANNON
D
∅
CLAMP,
METAL
• Low cost
• Easy to assemble
• Mounting hardware included
• 2 thumbscrews, 2 cable clamps
Shell
Size
DE
DA
DB
DC
DD
Part
Number
DEBS-9
DABS-15
DBBS-25
DCBS-37
DDBS-50
ø D
max.
Layout
9
15
25
37
50
A
C
E
35,20 (1.386)
43,31 (1.705) 33,33 (1.312)
57,20 (2.252) 47,04 (1.852)
72,00 (2.83)
73,70 (2.90)
24,99 (.984)
5,69 (.224)
5,69 (.224)
6,50 (.256)
7,80 (.307)
8,20 (.322)
27,51 (1.083)
31,19 (1.228)
38,30 (1.508)
43,08 (1.69)
48,04 (1.89)
Materials and Finishes
62,00 (2.44)
63,70 (2.50)
Backshell Material:
Hardware Material:
Hardware Finish:
Polypropylene
Steel
Black Nickel
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
11
D Cannon D-Subminiature Accessories
Plastic Backshell
One-Piece Plastic
Straight Exit
B
G
Cable Entry
ø E
Cable Entry
F
A
C
Cable Entry
• Kit consists of 1 shell, 1 cable clamp,
1 set screw
• Mounting hardware included
• 2 screws #4-24 x 5/16 long self tapping
• Accommodates spring latches
D
TWO SCREWS 4-24 X 5/16 long
SELF-TAPPING
Shell
Part
A
B
C
D
øE
F
G
Materials and Finishes
Material:
Size Layout Number ±±0,3 (.±15) ±±0,3 (.±15) ±±01, (.±±5) ±±0,3 (.±15) ±±0ꢀ5 (.±1±) ±±0ꢀ5 (.±1±) ±±0ꢀ5 (.±1±)
Black Thermoplastic,
UL 94V-0 rated
Steel
DE
DA
DB
DC
DD
9
DE51218 30,94 (1.218) 25,40 (1.000) 24,99 (.984) 12,70 (.500) 7,14 (.281)
15 DA51210 39,27 (1.546) 25,40 (1.000) 33,33 (1.312) 12,70 (.500) 9,14 (.360)
25 DB51212 53,16 (2.093) 31,75 (1.250) 47,04 (1.852) 12,70 (.500)
37 DC51214 69,44 (2.734) 38,10 (1.500) 63,50 (2.500) 12,70 (.500)
50 DD51216 67,06 (2.640) 38,10 (1.500) 61,11 (2.406) 15,47 (.690)
—
—
—
—
Hardware Material:
Hardware Finish:
—
—
—
12,52 (.493)
17,63 (.694)
18,64 (.734) 11,89 (.468)
9.15 (.360)
9.15 (.360)
Chromate over Zinc
90º Exit
K
Cable Entry
A
ø H
Cable Entry
J
B
• Kit consists of 1 shell, 1 cable clamp,
1 set screw
• Mounting hardware included
• 2 screws #4-24 x 5/16 long self tapping
C
D
Shell
Part
A
B
C
D
øH
J
K
Materials and Finishes
Material:
Size Layout Number ±±0,3 (.±15) ±±0,3 (.±15) ±±01, (.±±5) ±±0,3 (.±15) ±±0ꢀ5 (.±1±) ±±0ꢀ5 (.±1±) ±±0ꢀ5 (.±1±)
Black Thermoplastic,
UL 94V-0 rated
Steel
DE
DA
DB
DC
DD
9
DE51219 37,95 (1.494) 25,40 (1.000) 24,99 (.984) 12,70 (.500) 7,14 (.281)
15 DA51211 46,28 (1.822) 25,40 (1.000) 33,33 (1.312) 12,70 (.500) 9,14 (.360)
25 DB51213 60,15 (2.368) 31,75 (1.250) 47,04 (1.852) 12,70 (.500)
37 DC51215 76,43 (3.009) 38,10 (1.500) 63,50 (2.500) 12,70 (.500)
50 DD51217 74,04 (2.915) 38,10 (1.500) 61,11 (2.406) 15,47 (.690)
—
—
—
—
—
—
—
12,52 (.493)
17,63 (.694)
18,64 (.734) 11,89 (.468)
9.15 (.360)
9.15 (.360)
Hardware Material:
Hardware Finish:
Chromate over Zinc
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
12
Locking Hardware
D Cannon D-Subminiature Accessories
Screw Lock Assemblies
ITT offers the largest variety of locking and
latching hardware. Refer to the accessories
selection guide on pages 2-3 for use with
Cannon backshells.
Rear Panel Mount
Front Panel Mount
Product Features
• Ensures positive mating
SCREW
SCREW
D SUBMINATURE
• Provides locking and latching for high
vibration applications
CLIP WITH
THREAD
CONNECTOR
PIN OR SOCKET
D SUBMINATURE
CONNECTOR
PIN OR SOCKET
CLIP WITH
THREAD
NUT
MOUNTING
PANEL
NUT
WASHER
WASHER
MOUNTING PANEL
LOCK
WASHER
D SUBMINATURE
CONNECTOR
LOCK
WASHER
PIN OR SOCKET
HEX NUT
HEX NUT
Male Screw Lock
A
SCREW
#4-40 UNC-2A THD
B
C
CLIP GAP
CLIP
• Kit consists of 1 screw and 1 clip
• Order 2 per connector
• Similar to M24308/25
Materials and Finishes
Material:
Finish:
Steel
Trivalent Chromate over Zinc
Shell
each
P/N
D20419
2 each
P/N
A
B
C
RoHS Compliant
P/N each
RoHS Compliant
Size
DE, DA, DB, DC
DE, DA, DB, DC
DE, DA, DB, DC
DE, DA, DB, DC
DD
±±0,38(±ꢀ15
14,10 (.555)
14,10 (.555)
14,10 (.555)
14,10 (.555)
16,66 (.656)
16,66 (.656)
16,66 (.656)
16,66 (.656)
±±02 8(±ꢀ±5
6,35 (.250)
7,14 (.281)
7,14 (.281)
7,92 (.312)
6,35 (.250)
7,14 (.281)
7,14 (.281)
7,92 (.312)
±±0ꢀ, 8(±±15
1,22 (.048)
1,70 (.067)
2,34 (.092)
2,34 (.092)
1,22 (.048)
1,70 (.067)
2,34 (.092)
2,34 (.092)
P/N 2 each
D20419-218
D20419-219
D20419-220
D20419-221
D20420-163
D20420-164
D20420-165
D20420-166
D20419-119
D20419-121
D20419-122
D20419-216
D20420-097
D20420-099
D20420-100
D20420-162
D20419-211
D20419-212
D20419-213
D20419-214
D20420-157
D20420-158
D20420-159
D20420-160
D20419-18
D20419-21
D20419-104
D20420
D20420-13
D20420-15
D20420-86
DD
DD
DD
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
13
D Cannon D-Subminiature Accessories
Locking Hardware
Female Screw Lock
Rear Panel Mount
Front Panel Mount
6,35 (.250) APPROX.
REMOVE ONE WASHER
FOR EACH 0,76 (.030)
OF PANEL THICKNESS
WHEN REAR MOUNTING
1,52 (0.60) MAX. PANEL
#4-40 NC-2B THD.
4,78 0,38
(.188 .015)
Hex across Flats
• Kit consists of 1 nut, 3 washer, 1 lock
washer, 1 hex nut.
• Order 2 per connector.
A
4,78 0,38
(.188 .015)
REAR FLANGE (REF.)
#4-40 NC-2A THD
Material:
Finish:
Steel
NOTE: (1) A 6 inch/pound (female) and 4 inch/pound (male) maximum torque during assembly is recommended on steel screw
lock assemblies. (2) A third flat washer is supplied for front panel mounting of tab shell connectors.
Chromate over Cadmium (Mil Spec)
or Zinc (RoHS)
Yellow Chromate Over Cadmium
Chromate Over Zinc
RoHS Compliant
Part Number
D20418-134
D20418-135
D20418-136
A
Mil-Spec
Part Number
M24308/26-1F
-
M24308/26-2F
-
each
Kit of 2 each
D20418-82
Kit of 2 each
D20418-128
0,38 (.015)
7,92 (.312)
12,70 (.500)
15,88 (.625)
19,05 (.750)
D20418-2
D20418-50
D20418-39
D20418-74
D20418-131
D20418-83
-
D20418-129
-
D20418-132
D20418-137
Screw Locks for Connectors with Integral Threaded Inserts
3,50
(.138)
MIN
5,00 (.197) HEX
(ACROSS FLATS)
THD B
THD A
3,50 (.138)
MIN
5,75
(.226)
4,50
(.177)
Part
Number
D121073-39
D112041 *
D121073-42
Thread Type
THD A
THD B
# 4-40 UNC-2A
# 4-40 UNC-2A
M3
# 4-40 UNC-2B
# 4-40 UNC-2B
M3
* without lock washer
• Kit consists of 1 jackpost, 1 lock washer.
• Order 2 per connector.
Loose Spacer
Dim A
Part Number: 253-0343-000 (D*M Style)
Part Number: 253-0343-011 (D*MA Style)
5.84 .08 (.230
.
003)
005)
A
9.40 .13 (.370
.
.192
.182
.120
.116
Material:
Finish:
Aluminum
Chromate over Cadmium
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
14
Locking Hardware
D Cannon D-Subminiature Accessories
Slide Lock Assemblies
#4-40
HEX. NUT
ITT offers the largest variety of locking and
latching hardware. Refer to the accessories
selection guide on pages 2-3 for use with
Cannon backshells.
LOCK
WASHER
SLIDE
LATCH
Product Features
#4-40
SCREW
FLAT
WASHERS
#4-40
• Ensures positive mating
• Provides locking and latching for high
vibration applications
POST
LOCK
WASHER
HEX NUT
Sliding Lock Retainer Assembly
2 SCREWS
#4-40 NC-2A THREAD
2,84 (.112)
3,66 0,38
(.144 .015)
RETAINER
SLIDING LOCK
2,36 (.093)
TRAVEL REF.
A
C
B
• Kit consists of 1 sliding lock plate, 2 mounting
screws, 2 lock washer, 2 hex nuts
• Order 1 kit per connector
Shell
Size
DE
DA
DB
DC
DD
Part
A
B
C
Layout
9
15
25
37
50
Number
DE51224-1
DA51220-1
DB51221-1
DC51222-1
DD51223-1
0,38 (.015)
35,05 (1.380)
43,70 (1.720)
57,40 (2.260)
73,86 (2.908)
71,47 (2.814)
0,38 (.015)
12,70 (.500)
12,70 (.500)
12,70 (.500)
12,70 (.500)
15,47 (.609)
0,13 (.005)
25,00 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
Finish/
Descriptions
Sliding Lock
Plate
Material
Treatment
Stainless Steel Passivated
Screw,
Mounting
Washer Lock
Nut, Hex
Steel
Steel
Steel
Trivalent
Chromate over
Zinc
Slide Lock Post Assemblies
SPACER
WASHER
LOCK WASHER
#4-40
HEX NUT
4,60
(.180)
HEX
• Consists of 1 post, 2 washers, 1 lock washer,
1
and 1 hex nut.
2,59 (.102)
0,13 (.005)
2
• Order 2 per connector.
10,57 (.416)
0,25 (.010)
1,2
Each
Kit of 2 each
D53018-11
D53018-20
NOTE: When rear-mounting connector to a 1/16”
panel, delete the second spacer washer.
Part Number:
D53018
D53018-14
Material: Steel, Finish: Chromate/Zinc
Material: Stainless Steel, Finish: Passivated
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
15
D Cannon D-Subminiature Accessories
Locking Hardware
Spring Latch Assemblies
ITT offers the largest variety of locking and
Unlocked
Locked
latching hardware. Refer to the accessories
selection guide on pages 2-3 for use with
Cannon backshells.
Product Features
• Low Cost
• Minimizes field connection time
• Positive lock between connectors
• Packaged 2 kits per bag
Materials and Finishes
Material:
Stainless Steel
Passivated
Treatment:
Spring Latch Plate Assembly
#4-40
SCREW
15,37 0,64
(.605 .025)
#4-40 THD. x 7,92 (.312)
LONG SCREW
2,41 (.095) -
1,52 (.060)
A
B
LATCH PLATE
#4-40 HEX. NUT
CONNECTOR
EITHER PIN OR SOCKET
Shell
Size
DE, DA, DB, DC
DD
Part
A
B
Part Number
Kit of 2 each
D110278-4
Layout
9,15, 25, 37
50
Number
D110278
D110280
0,38 (.015)
12,42 (.489)
15,47 (.609)
0,38 (.015)
14,35 (.565)
17,09 (.673)
D110280-3
LOCK WASHER
#4-40
HEX NUT
• Kit consists of 1 plate, 1 screw,
1 lock washer,1 hex nut.
• Order 2 kits per connector.
Spring Latch Assembly
SPRING LATCH
#4-40
SCREW
15,57 0,64
(.613 .025)
#4-40 THD. x 7,92 (.312)
LONG SCREW
B
A
C
2,41 (.095)
1,52 (.060)
SPRING LATCH
MOUNTING BRACKET
#4-40 HEX. NUT
CONNECTOR
EITHER PIN OR SOCKET
Shell
Size
DE, DA, DB, DC
DD
Part
A
B
C
Part Number
Kit of 2 each
D110277-2
Layout
9,15, 25, 37
50
Number
D110277
D110279
0,38 (.015)
12,42 (.489)
15,47 (.609)
0,38 (.015)
14,35 (.565)
17,09 (.673)
0,51 (.020)
18,59 (.732)
18,59 (.732)
D110279-3
LOCK WASHER
D110277-4 Rear panel mount version also available
#4-40
HEX. NUT
• Kit consists of 1 spring, 1 screw, 1 bracket,
1 lock washer, 1 hex nut.
• Order 2 kits per connector. Front panel mounting.
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
16
Locking Hardware
D Cannon D-Subminiature Accessories
Jackscrew/Jackpost Assemblies
Jackscrew Assembly
ITT offers the largest variety of locking and
latching hardware. Refer to the accessories
selection guide on pages 2-3 for use with
Cannon backshells.
Jackpost Assembly
HEAD, JACKSCREW
# 2-56 UNC THD
# 4-40 UNC THD
# 4-40 UNC-2B THD
RETAINING
COMPOUND
# 4-40 UNC-2A THD
WASHER,
#4 LOCK
Ø 3,05 (.120)
STUD, JACKSCREW
#4 HEX NUT
FEMALE POST
Ø 3,05 (.120)
Jackscrew Assembly
0,89 (.035)
0,13 (.005)
5,59 (.220)
DIA. MAX.
9,40 (.370)
MAX.
1,73 (.068)
MAX.
16,26 (.640)
MAX.
• Kit consists of 2 studs, 2 heads,
1 tube retaining compound (US only)
• Order one kit per connector
4,57 (.180)
MAX.
0,64 (.025)
0,13 (.005)
Part Number:
Materials and Finishes
Material:
D110550
#4-40 UNC
THREAD
5,59 (.220) DIA.
MAX.
Stainless Steel
Passivated
Treatment:
Jackpost Assembly
4,75 (.187) HEX
(ACROSS FLATS)
CONNECTOR
ASSY
#4-40 UNC THREAD
5,84 (.230) 0,13 (.005)
14,10 (.555)
0,13 (.005)
1,14 (.045)
0,13 (.005)
• Kit consists of 2 posts, 2 hex nuts, 2 lock washer
• Order one kit per connector
PANEL 3,18 (.125) MAX.
LOCK WASHER
5,59 (.220) MIN.
PERFECT THD.
HEX NUT
#4-40 UNC THREAD
Part Number:
Materials and Finishes
Material:
D110551
Stainless Steel
Passivated
Treatment:
NOTE: Jack post is not compatible with rear-panel mount connectors.
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
17
Guide Pin Plate
D Cannon D-Subminiature Accessories
GuidePinPlate
Female
9,60 (.378)
MAX
A
B
MOUNTING
PANEL
E
+
F
+
+
+
G
F
•Useful inblindmateapplications.
• Kit consists of 1 plate, 2 screws.
• Guide pin inserts for Size 8 cavities for
Combo D® connectors also available. Refer to
Combo D Catalog.
+
1,57
C
(.062)
6,35 (.250) MAX.
SOLDER POT
EXTENSION
1,60 (.063)
0,41 (.016)
RAD.
D
4,04 (.159)
DIA. MIN.
2 PLACES
MOUNTING HOLE
#4.40 UNC-2B THREAD
(SCREW SUPPORT)
2 PLACES
4 PLACES
PlateandHardwareMaterial:
PlateandHardwareFinish:
Steel
ChromateoverZinc
Shell
Size Layout
Part
Number
A
B
C
D
E
F
G
H
J
K
±±0,4(.±46) ±±041(.±±5) ±±041(.±±5) ±±041(.±±5) ±±041(.±±5) ±±041(.±±5) ±±0,4(.±46) ±±0,4(.±46) ±±0,4(.±46) ±±0,4(.±46)
DE
DA
DB
DC
DD
9
DE111920 49,61(1.953) 40,08(1.578)
25,00(.986)
18,65(.734)
15,27(.601)
9,52(.375)
9,52(.375)
9,52(.375)
9,52(.375)
25,40(1.000) 30,58(1.204)
25,40(1.000) 38,91(1.532)
25,40(1.000) 51,21(2.016)
25,40(1.000) 67,49(2.657)
12,29(.484)
12,29(.484)
11,91(.469)
11,91(.469)
14,30(.563)
6,15(.242)
6,15(.242)
5,94(.234)
5,94(.234)
7,16(.282)
15
25
37
50
DA22214 57,96(2.282) 48,41(1.906) 33,32(1.312) 22,81(.898)
19,43(.765)
DB22254 71,63(2.820) 62,13(2.446) 47,04(1.852) 29,67(1.168) 26,29(1.035)
DC22071 88,11(3.469) 78,59(3.094) 63,50(2.500) 37,90(1.492) 34,52(1.359)
DD21961 85,72(3.375) 76,20(3.000) 61,11(2.406) 36,50(1.437) 33,32(1.312) 11,10(.437) 28,58(1.125) 65,10(2.563)
RecommendedPanel Cutout
4,22 0,05
(.166 .002)
DIA.
K
B
+
RADIUS
2 PLACES
E
3,66 0,13
(.144 .005)
DIA.
+
F
+
+
2 PLACES
F
+
J
D
H
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
18
Guide Pin Plate
D Cannon D-Subminiature Accessories
GuidePinPlate
Male
A
B
4,78 0,30
(.188 0.12)
6,35 (.250) MAX
SOLDER POT
EXTENSION
C
3,66 0,13
(.144 .005)
2 PLACES
1,57 (.062)
MAX.
D
ITT CANNON
4,01 (.158)
DIA. MAX.
4,06 (.160) REF
DIA MAX.
F
E
•Useful inblindmateapplications.
• Kit consists of 1 plate, 2 sems screws, 2 rivets,
2 guide pins, 2 washer
• Guide pin inserts for Size 8 cavities for Combo
D® connectors also available. Refer to Combo D
Catalog.
1,57 0,13
(.062 .005)
C
L
8,71 0,38
(.343 .015)
22,22 0,76
(.875 .030)
G
4,06 0,25
(.160 .010)
PlateandHardwareMaterial:
PlateandHardwareFinish:
GuidePinMaterial:
Steel
ChromateoverZinc
StainlessSteel
Shell
Size Layout
Part
Number
A
B
C
D
E
F
G
H
J
K
±±0,4(.±46) ±±041(.±±5) ±±041(.±±5) ±±041(.±±5) ±±041(.±±5) ±±041(.±±5) ±±0,4(.±46) ±±0,4(.±46) ±±0,4(.±46) ±±0,4(.±46)
DE
DA
DB
DC
DD
9
DE111919 49,61(1.953) 40,08(1.578) 33,91(1.335) 18,65(.734) 25,40(1.000) 19,05(.750)
25,00(.984)
12,29(.484)
12,29(.484)
12,29(.484)
12,29(.484)
15,06(.593)
30,58(1.204) 6,15(.242)
38,89(1.531) 6,15(.242)
51,99(2.047) 6,15(.242)
68,25(2.687) 6,15(.242)
66,93(2.635) 7,52(.296)
15
25
37
50
DA22213 57,96(2.282) 48,41(1.906) 42,24(1.663) 22,81(.898) 25,40(1.000) 19,05(.750) 33.32(1.312)
DB22255 71,63(2.820) 62,13(2.446) 55,96(2.203) 29,67(1.168) 25,40(1.000) 19,05(.750) 47,04(1.852)
DC22070 88,11(3.469) 78,59(3.094) 72,42(2.851) 37,90(1.492) 25,40(1.000) 19,05(.750) 63,50(2.500)
DD21962 85,72(3.375) 76,20(3.000) 69,82(2.749) 36,50(1.437) 28,58(1.125) 22,20(.874) 61,11(2.406)
RecommendedPanelCutout
B
C
K
RADIUS
D
+
3,66 0,13 DIA.
(.144 .005)
2 PLACES
+
+
F
H
+
+
+
5,54 0,13 DIA.
(.218 .005)
2 PLACES
C
L
J
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
19
D Cannon D-Subminiature Accessories
Connector Saver
High Reliability Connector Saver
Engaging Face, Pin Side
21,95 0,51
(.864 .020)
A
B
C
5,97 0,25
6,17 0,25
(.235 .010)
(.243 .010)
CONTACT
(SOCKET)
11˚
9˚
CONTACT
(PIN)
2X
SHELL
SOCKET FRONT
SPACER
SHELL
PIN FRONT
NOTE: Hardware removed for clarity.
Shell
Size
DE
DA
DB
Part
Number
DEBMAM9PS
DABMAM15PS
DBBMAM25PS
DCBMAM37PS
A
B
C
Layout
9
15
50
37
0,40 (.015)
0,25 (.010)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
0,25 (.010)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
16,92 (.666)
25.25 (.994)
38,96 (1.534)
55,42 (2.182)
DC
DD
50
DDBMAM50PS
66,93 (2.635)
61,11 (2.406)
52,81 (2.079)
Specifications
Temperature: -55º C to 105º C
Current Rating: 7 A
Dielectric withstanding Voltage: 500 VAC at Sea Level
Description
Shells
Material
Steel
Finish
Materials and Finishes
Yellow Chromate over Zinc
—
Insulator
White Thermoplastic, UL 94V-0
Copper Alloy
Contacts
Locking Hardware
Gold Over Copper
Passivated
Stainless Steel
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
20
D Cannon D-Subminiature Accessories
Miscellaneous
Polarizing Plates
Polarizing Scheme
Material: Black plastic, 94-V-O rated
Polarizing
Keys
G H
F
A B C
E
D
Position
1
2
3
4
Part Number
by Shell Size
DE 115398
DA 115398-1 1.535 (39,0)
DB 115398-2 2.082 (52,9)
DC 115398-3 2.726 (69,2)
A
B
1.208 (30.7)
0.629 (16)
0.629 (16)
0.629 (16)
0.629 (16)
5
6
7
DD 115398-3 2.630 (66,8)
0.749 (19)
8
9
10
Cut Key on
pin connector
Cut Key on socket
connector
Right Angle Brackets (Used with 90º Printed Circuit Connector D*M, D*, D*C,/D*U)
Material: Black Polyester, UL-94V-0 Rated
D*/D*M
Shell
Size
DE
Part
A
.015
1.224 (31.1)
1.552 (39.4)
2.092 (53.1)
2.740 (69.0)
B
.005
C
.010
D
.010
E
.010
F
.010
Number
015-0338-000
015-0339-000
015-0340-000
015-0341-000
.984 (24.0) .340 (8.63) .484 (12.3) 24.7 (6.27) .283 (7.2)
1.312 (33.3) .340 (8.63) .484 (12.3) 24.7 (6.27) .283 (7.2)
1.852 (47.0) .340 (8.63) .484 (12.3) 24.7 (6.27) .283 (7.2)
2,500 (63.5) .340 (8.63) .484 (12.3) 24.7 (6.27) .283 (7.2)
DA
DB
DC
DD
015-0342-000
2.646 (67.2)
2.406 (61.1) .395 (10.0) .594 (15.1) .302 (7.67) .283 (7.2)
D*C/D*U
Shell
Size
DE
Part
Number
A
.015
B
.005
.984 (24.0)
1.312 (33.3)
1.852 (47.0)
2,500 (63.5)
C
.010
D
010
E
.010
F
.010
015-0348-000 1.224 (31.1)
015-0349-000 1.552 (39.4)
015-0350-000 2.092 (53.1)
015-0351-000 2.740 (69.0)
.340 (8.63) .484 (12.3) 24.7 (6.27) .283 (7.2)
.340 (8.63) .484 (12.3) 24.7 (6.27) .283 (7.2)
.340 (8.63) .484 (12.3) 24.7 (6.27) .283 (7.2)
.340 (8.63) .484 (12.3) 24.7 (6.27) .283 (7.2)
DA
DB
DC
DD
015-0352-000 2.646 (67.2)
2.406 (61.1)
.395 (10.0) .594 (15.1) .302 (7.67) .283 (7.2)
Wire Hole Fillers (D*MA Series Only)
Material: Nylon
Part Number
DMA 51236-1
Insert Type
Socket
Pin
DMA 51235-1
Pin
Socket
Insert this end first
From Terminal end of Connector
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
21
Miscellaneous
D Cannon D-Subminiature Accessories
Dust Cap
RAISED GATE MARK
R. TYP.
6,35 (.250)
D
A
C
ITT CANNON
XX-XX-XX
B
1,02
.04 WALL TYP.
B
NOTE: C dim. applies at point of maximum Integral interface length. Drawing shown for Black Anti-static caps.
Dimensions shown are reference only.
Dust caps provide protection from moisture
and dust for unused I/O ports.
Black Antistatic Red Caps
(Surface Resistivity
<1x10 ohm/sq)
(Surface Resistivity
Product Features
5
5
12
I.D.
A
B
C
D
10 -10 ohm/sq)
DE-59-20RC
DA-59-20RC
DB-59-20RC
DC-59-20RC
DD-59-20RC
DE-60-20RC
DA-60-20RC
DB-60-20RC
DC-60-20RC
DD-60-20RC
• Dust Caps meet the static decay test
requirements of MIL-B- 81705C, Type II.
• Dust Caps have an integral flange for easy
application and removal
DE-59-20BA
DA-59-20BA
DB-59-20BA
DC-59-20BA
DD-59-20BA
DE-60-20BA
DA-60-20BA
DB-60-20BA
DC-60-20BA
DD-60-20BA
Socket 20,32 (.800)
Socket 28,45 (1.120)
Socket 42,42 (1.670)
Socket 58,93 (2.320)
Socket 56,90 (2.240)
11,43 (.450)
11,68 (.460)
11,68 (.460) 38,25 (1.506) 7,49 (.295)
11,68 (.460) 54,81 (2.158) 7,37 (.290)
14,48 (.570) 53,11 (2.091) 10,41 (.410)
16,36 (.644)
24,59 (.968)
7,59 (2.99)
7,62 (.300)
Pin
Pin
PIn
Pin
Pin
21,84 (.860)
30,48 (1.200)
44,20 (1.740)
60,71 (2.390)
12,95 (5.10)
17,78 (.700)
8,92 (.351)
12,95 (.510) 26,52 (1.044) 9,02 (.355)
13,46 (.530) 39,60 (1.559) 9,09 (.358)
13,46 (.530) 56,90 (2.240) 9,37 (.369)
Materials and Finishes
Material:
58,17 (2.290) 16.00 (.630) 54,28 (2.137) 12.04 (.474)
Polyethylene
Interfacial Seal
10˚ TYP.
A
0,79 + 0,38 - 0.00
(.031 + .015 - .000)
B
ø 0,91 +_ 0,18
(.036 +_ .007)
DIA. TYP.
Interfacial seals provide moisture resistance at the
mating interface.
Shell Size
DE
Layout
9
Part Number
A
B
DE53750
16,66 (.656)
24,99 (.984)
38,88 1.531)
55,14 (2.171)
52,78 (2.078)
55,14 (2.171)
16,66 (.656)
24,99 (.984)
38,88 1.531)
55,14 (2.171)
52,78 (2.078)
8,41 (.331)
8,41 (.331)
8,41 (.331)
8,41 (.331)
11,10 (.437)
8,41 (.331)
8,41 (.331)
8,41 (.331)
8,41 (.331)
8,41 (.331)
11,10 (.437)
Product Features
DA
15
DA53750-1
• Other Interfacial Seals in the Combo D®
layouts are available upon request.
DB
DC
DD
25
DB53750-2
37
DC53750-3
50
DD53750-4
DC
DE
DA
DB
DC
DD
21WA4
15
075-0354-003
273-0333-000
273-0334-000
273-0335-000
273-0336-000
273-0337-000
Material:
Silastic Sheet
26
44
62
78
Potting Shell
15,20
(.600)
+
+
4,70 (.185)
0,76 (.030)
3,25 (.128) DIA.
Potting shells are molded with a thin flange 0,76
(.030) to permit the use of D Subminiature
locking devices.
Shell Size
Layout
9
Part Number
DE50904-1
DA50905-1
DB50906-1
DC50907-1
DD50908-1
DE
DA
DB
DC
DD
15
Materials and Finishes
Material:
Color:
25
Nylon
37
Natural (white)
50
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
22
Index
D Cannon D-Subminiature Accessories
Standard RoHS
Part #
Page StandardRoHS
Page StandardRoHS
Page
#
Part #
#
Part #
Part #
#
Part #
Part #
075-0354-003 Same
250-8501-004 Same
250-8501-009 Same
250-8501-010 Same
250-8501-013 Same
273-0333-000 Same
273-0334-000 Same
273-0335-000 Same
273-0336-000 Same
273-0337-000 Same
980-2000-345 Same
980-2000-346 Same
980-2000-347 Same
980-2000-348 Same
980-2000-350 Same
980-2000-351 Same
980-2000-352 Same
980-2000-353 Same
980-2000-354 Same
22
5
DA22214
DA24658
DA50905-1
DA51210
DA51211
DA51220-1
DA53750-1
DA-59-20
DA-60-20
Same
18
9
DD121073-53 Same
4
DA24658-28
Same
DD19678-4
DD19977-4
DD20964
DD21961
DD21962
DD24661
DD50908-1
DD51216
DD51217
DD51223-1
DD53750-4
DD-59-20
DD-60-20
Same
Same
DD20964-32
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
10
10
9
5
22
12
12
15
22
22
22
20
11
9
5
Same
5
Same
18
19
9
22
22
22
22
22
6
Same
Same
Same
22
12
12
15
22
22
22
20
19
18
11
4
Same
DABMA15PS Same
DABS-15
Same
6
DB115339-22 Same
DB121073-151 Same
DB121073-51 Same
6
4
6
4
12
12
12
12
12
16
16
16
16
17
17
5
DB19678-2
DB19977-2
DB20962
DB22254
DB22255
DB24659
DB50906-1
DB51212
DB51213
DB51221-1
DB53750-2
DB-59-20
DB-60-20
DB19678-213 10
DDBMA50PS Same
DB19977-69
9
DE111919
DE111920
Same
Same
DB20962-30 10
Same
18
19
9
DE115339-20 Same
DE121073-154 Same
DE121073-54 Same
Same
D110277
Same
Same
Same
Same
Same
Same
Same
Same
Same
DB24659-27
Same
4
D110278
22
12
12
15
22
22
22
20
11
11
4
DE19977-5
DE24657
DE44994
DE50904-1
DE51218
DE51219
DE51224-1
DE53750
DE-59-20
DE-60-20
DEBMA9PS
DEBS-9
DE19977-72 10
D110279
Same
DE24657-29
DE44994-14
Same
9
D110280
Same
9
D110550
Same
22
12
12
15
22
22
22
20
11
D110551
Same
Same
D121073-19
D121073-39
D121073-42
D20418-2
D20418-39
D20418-50
D20418-74
D20419
Same
Same
14
14
Same
Same
DBBMA25PS Same
Same
D20418-134 14
D20418-136 14
D20418-135 14
D20418-137 14
D20419-211 13
D20419-214 13
D20419-212 13
D20419-213 13
D20420-157 13
D20420-158 13
D20420-159 13
D20420-160 13
DBBS-25
Same
Same
DC115339-23 Same
DC121073-152 Same
DC121073-52 Same
Same
Same
4
Same
DC19678-3
DC19977-3
DC20963
DC22070
DC22071
DC24660
DC50907-1
DC51214
DC51215
DC51222-1
DC53750-3
DC-59-20
DC-60-20
DC19678-214 9
D20419-104
D20419-18
D20419-21
D20420
DC19977-70
DC20963-27
Same
9
9
19
18
7
Same
D20420-13
D20420-15
D20420-86
D53018
Same
Same
22
12
12
15
22
22
22
20
11
4
Same
Same
15
11
4
Same
DA115339-21 Same
DA121073-150 Same
DA121073-50 Same
Same
Same
4
Same
DA19678-1
DA19977-1
DA20961
DA19678-212 10
DA19977-68 10
Same
DCBMA37PS Same
DD115339-24 Same
DD121073-153 Same
DA20961-26
Same
9
DA22213
19
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
23
Product Safety and Warranty
1. MATERIAL CONTENT AND PHYSICAL
FORM
Electrical connectors do not usually contain
hazardous materials. They contain conduct-
ing and non-conducting materials and can
be divided into two groups.
a) Printed circuit types and low cost audio
types which employ all plastic insulators and
casings.
b) Rugged, Fire Barrier and High Reliability
types with metal casings and either natural
rubber, synthetic rubber, plastic or glass
insulating materials. Contact materials vary
with type of connector and also application
and are usually manufactured from either:
Copper, copper alloys, nickel, alumel,
chromel or steel. In special applications,
other alloys may be specified.
4. DISPOSAL
Incineration of certain materials may release
noxious or even toxic fumes.
Product Warranty
A limited warranty applies to Cannon prod-
ucts. In general, except for obligations
assumed by Cannon under this warranty,
Cannon shall not be liable for any loss, dam-
age, cost of repairs, incidental or consequen-
tial damages of any kind, whether or not
based on express or implied warranty, con-
tract, negligence or strict liability arising in
connection with the design, manufacture,
sale, use or repair of the products. Product
availability, prices and delivery dates are
exclusively subject to our respective order
confirmation form; the same applies to
orders based on development samples deliv-
ered. Please refer to www.ittcannon.com
(General Terms of Sale) for the complete text
of Cannon’s applicable Terms and
Conditions, including Warranty.
5. APPLICATION
Connectors with exposed contacts should
not be selected for use on the current supply
side of an electrical circuit, because an elec-
tric shock could result from touching
exposed contacts on an unmated connector.
Voltages in excess of 30 V ac or 42.5 V dc are
potentially hazardous and care should be
taken to ensure that such voltages cannot be
transmitted in any way to exposed metal
parts of the connector body. The connector
and wiring should be checked, before mak-
ing live, to have no damage to metal parts or
insulators, no solder blobs, loose strands,
conducting lubricants, swarf, or any other
undesired conducting particles. Circuit
resistance and continuity check should be
made to make certain that there are no high
resistance joints or spurious conducting
paths. Always use the correct application
tools as specified in the Data Sheet/Catalog.
Do not permit untrained personnel to wire,
assemble or tamper with connectors. For
operation voltage please see appropriate
national regulations.
2. FIRE CHARACTERISTICS AND ELECTRIC
SHOCK HAZARD
This publication is not to be construed as an
offer. It is intended merely as an invitation to
make an offer. By this publication, Cannon
does not assume responsibility or any liabili-
ty for any patent infringements or other
rights of third parties which may result from
its use.
There is no fire hazard when the connec-
tor is correctly wired and used within the
specified parameters. Incorrect wiring or
assembly of the connector or careless use
of metal tools or conductive fluids, or
transit damage to any of the component
parts may cause electric shock or burns.
Live circuits must not be broken by sepa-
rating mated connectors as this may
cause arcing, ionization and burning. Heat
dissipation is greater at maximum resistance
in a circuit. Hot spots may occur when resist-
ance is raised locally by damage, e.g. cracked
or deformed contacts, broken strands of
wire. Local overheating may also result from
the use of the incorrect application tools or
from poor quality soldering or slack screw
terminals. Overheating may occur if the rat-
ings in the product Data Sheet/Catalog are
exceeded and can cause breakdown of insu-
lation and hence electric shock. If heating is
allowed to continue it intensifies by further
increasing the local resistance through loss
of temper of spring contacts, formation of
oxide film on contacts and wires and leakage
currents through carbonization of insulation
and tracking paths. Fire can then result in
the presence of combustible materials and
this may release noxious fumes. Overheating
may not be visually apparent. Burns may
result from touching overheated compo-
nents.
Reprinting this publication is generally per-
mitted, indicating the source. However,
Cannon's prior consent must be obtained in
all cases. “Engineered for life” is a registered
trademark of ITT Corporation ©2006. All
other trademarks or registered trademarks
are property of their respective owners. All
dates subject to change without notice.
IMPORTANT GENERAL INFORMATION
(i) Air and creepage paths/Operating volt-
age. The admissible operating voltages
depend on the individual applications and
the valid national and other applicable safe-
ty regulations.
For this reason the air and creepage path
data are only reference values. Observe
reduction of air and creepage paths due to
PC board and/or harnessing.
Commodities in this catalog may be
controlled for export by the International
Traffic in Arms Regulations (ITAR) and Export
Administration Regulations (EAR) when
specifically designed modified, or configured
for articles controlled by the United States
Government.
(ii) Temperature
All information given are temperature limits.
The operation temperature depends on the
individual application.
(iii) Other important information
Cannon continuously endeavors to improve
their products. Therefore, Cannon products
may deviate from the description, technical
data and shape as shown in this catalog and
data sheets.
3. HANDLING
Care must be taken to avoid damage
ITT Interconnect Solutions, a Division of ITT
Corporation manufactures the highest qual-
ity products available in the marketplace;
however these products are intended to be
used in accordance with the specifications in
this publication. Any use or application that
deviates from the stated operating specifica-
tions is not recommended and may be
unsafe. No information and data contained
in this publication shall be construed to cre-
ate any liability on the part of Cannon. Any
new issue of this publication shall automati-
cally invalidate and supersede any and all
previous issues.
to any component parts of electrical connec-
tors during installation and use. Although
there are normally no sharp edges, care
must be taken when handling certain com-
ponents to avoid injury to fingers. Electrical
connectors may be damaged in transit to the
customers, and damage may result in cre-
ation of hazards. Products should therefore
be examined prior to installation/use and
rejected if found to be damaged.
www.ittcannon.com
24
D
Circular/Filter/Hermetic/Fiber Optic Connectors
As a world leader in circular, filter, and hermetic connectors, ITT can
leverage its design and manufacturing expertise to fit virtually any
application. Our expertise includes fast positive mating for a wide
range of military applications, as well as numerous sizes and
contact configurations for various harsh environments. Our wide
variety of fiber optic products include hybrid contacts, multi-channel,
rack and panel, and hi-rel assemblies, including MIL and ARINC
standard solutions.ITT can meet numerous specs, including
NATO and MIL standards.
www.ittcannon.com/circulars • www.ittcannon.com/filter • www.ittcannon.com/hermetics • www.ittcannon.com/fiberoptics
D-Subminiature Connectors
Cannon invented D-sub connectors in 1952. Our family
of D-Subs now includes combinations of signal, power and RF, as
well as severe service sealed connectors. Cannon D-Subs are
available with an extensive line of backshells and accessories and
are one of the most economical shielded connector solutions
available. ITT D-Sub connectors are qualified to the MIL-DTL-
24308 specification.
www.ittcannon.com/dsubs
Microminiature Connectors
Developed first by Cannon in the 1960’ s, Interconnect Solutions
microminiature connectors offer high performance and reliability
with exceptional versatility. Available in rectangular, circular,
and strip configurations for countless applications, many of our
connectors meet or exceed applicable requirements of the MIL-
DTL-83513 specification.
www.ittcannon.com/micro
Rack and Panel Connectors
Initially pioneered by Cannon during the 1930s, Interconnect
Solutions is the world leader in rack and panel connectors, offering
unmatched variety of shell configurations and insert arrangements,
materials, plating, and contact options. Many of our standard and
custom designs meet the stringent requirements of ARINC 600,
ARINC 404 (MIL-C-81659), and MIL-DTL-83733 standards.
www.ittcannon.com/rackandpanel
RF Connectors
ITT Interconnect Solutions has been providing interconnect
products to the Microwave and RF industry since 1963 (formerly
The Sealectro Corporation). The RF 50 & 75 Ohm product lines
cover UHF band through Ku band requirements. These connectors
and cable assemblies are available with a thread type, snap type,
bayonet type or slide on coupling method. The frequencies range
from DC to 18+ GHz.
www.ittcannon.com/RF50 • www.ittcannon.com/RF75
Transportation
The ITT ICS interconnect range includes sealed circular and rectangular
connectors in metal or plastic shells. These configurations include board to
cable or cable to cable/ bulkhead applications. Both signal and power con-
tacts can be combined in various layouts. All product lines within the
Transportation segment offer very low contact resistance providing maxi-
mum signal integrity.
www.ittcannon.com/transportation
ITT Interconnect Solutions is an international manufacturer and supplier of connectors
including circular, rectangular, fiber optic, RF, power and high voltage, audio, PMCIA,
Compact Flash Card, enclosures, cable assemblies, and application specific custom
solutions. The Interconnect Solutions portfolio includes the brands Cannon, VEAM, and
BIW. As a worldwide leader in connector technology for nearly a century, ITT offers one
of the broadest product offerings, six sigma manufacturing capability, Value Based
Product Development with exceptional engineering capability, and an extensive sales,
distribution, and customer support network.
Customer Support Locations
CHINA
Tuopandun Industrial Area, Jinda Cheng,
Xiner Village, Shajing Town,
Baoan District, Shenzhen City,
Guangdong, China 518125
phone: +86.755.2726.7238
fax:
+86.755.2726.7515
GERMANY
Cannonstrasse 1
Weinstadt, 71384
phone: +49.7151.699.0
fax:
+49.7151.699.217
FRANCE
15, Boulevard Robert Thiboust
Serris, France 77700
phone: +33.1.60.04.93.93
fax:
+33.1.60.04.93.90
HONG KONG
Units 2405-6, 24/F, ING Tower
308 Des Voeux Road
Central
Hong Kong
phone: +852.2732.2720
fax:
+852.2732.2919
ITALY
Corso Europa 41/43
Lainate (MI), Italy 20020
phone: +39.02938721
fax:
+39.0293872300
JAPAN
11-3, 5 Chome,Hibarigaoka, Zama-shi
Kanagawa, Japan 228-0003
phone: +81.462.57.2010
fax:
+81.462.57.1680
UK
Jays Close, Viables Estate
Basingstoke, RG22 4BA
phone: +44.1256.311200
fax:
+44.1256.323356
USA
666 East Dyer Road
Santa Ana, CA 92705
toll free: 1.800.854.3028
phone: +1.714.557.4700
fax:
+1.714.628.2142
©2008 ITT Corporation. “Engineered for life” and “Cannon” are registered trademarks of
ITT Corporation. Specification and other data are based on information available at the
time of printing, and are subject to change without notice.
www.ittcannon.com
相关型号:
©2020 ICPDF网 联系我们和版权申明